| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4943FA3E.9090507@cam.ac.uk>
Date: Sat, 13 Dec 2008 18:09:02 +0000
From: Jonathan Cameron <jic23@....ac.uk>
To: LKML <linux-kernel@...r.kernel.org>
CC: felipe.balbi@...ia.com, Liam Girdwood <lrg@...nel.org>,
Mark Brown <broonie@...ena.org.uk>,
Mike Rapoport <mike@...pulab.co.il>
Subject: [PATCH] mfd: DA9030 USB charge pump mode selection support
From: Jonathan Cameron <jic23@....ac.uk>
Add support for changing the mode of the da9030 usb charge pump
Signed-off-by: Jonathan Cameron <jic23@....ac.uk>
--
This simple driver is intended to allow board configs to control
the mode in which the usb charge pump on th da9030 pmic is
running (typically as part of usb enable callbacks).
The 3 options are:
auto - controlled entirely by hardware signals.
100mA charge pump manual enable
10mA current source manual enable
Note this function is completely separate from the usb charging
functionality (which will need a much more sophisticated driver).
As ever, all comments welcomed.
The main question on this is whether it should just be rolled into
the core mfd driver. I'm inclined to keep it separate and decidedly
optional as the fact it isn't already in the driver implies that
it may not be commonly used. (Intel Stargate 2 does need this
functionality though, hence the submission as I'm hoping to get
the relevant board code in soonish.)
I don't have the da9034 data sheet, so not a clue if this is
relevant for that as well?
Signed-off-by: Jonathan Cameron <jic23@....ac.uk>
drivers/mfd/Kconfig | 7 +++
drivers/mfd/Makefile | 3 +-
drivers/mfd/da9030-usb.c | 79 ++++++++++++++++++++++++++++++++++++++
include/linux/mfd/da9030-usbcp.h | 20 ++++++++++
4 files changed, 108 insertions(+), 1 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2572773..d53e82d 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -114,6 +114,13 @@ config PMIC_DA903X
individual components like LCD backlight, voltage regulators,
LEDs and battery-charger under the corresponding menus.
+config PMIC_DA9030_USBCP
+ bool "DA9030 USB charge pump mode control"
+ depends on PMIC_DA903X
+ help
+ Say yes here to support control of the USB charge pump on
+ the DA9030 PMIC.
+
config MFD_WM8400
tristate "Support Wolfson Microelectronics WM8400"
depends on I2C
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 9a5ad8a..eeb86c9 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -31,4 +31,5 @@ obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o
endif
obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
-obj-$(CONFIG_PMIC_DA903X) += da903x.o
\ No newline at end of file
+obj-$(CONFIG_PMIC_DA903X) += da903x.o
+obj-$(CONFIG_PMIC_DA9030_USBCP) += da9030-usb.o
\ No newline at end of file
diff --git a/drivers/mfd/da9030-usb.c b/drivers/mfd/da9030-usb.c
new file mode 100644
index 0000000..f1160c6
--- /dev/null
+++ b/drivers/mfd/da9030-usb.c
@@ -0,0 +1,79 @@
+/* mfd/da9030-usb.c
+ *
+ * Minimal control driver for the da9030 usb charge pump.
+ *
+ * Jonathan Cameron <jic23@....ac.uk> 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/da903x.h>
+#include <linux/mfd/da9030-usbcp.h>
+
+/* Single device assumption */
+struct device *da9030_mfd;
+
+int da9030_set_usb_charge_pump_mode(int mode)
+{
+ uint8_t val = 0;
+
+ switch (mode) {
+ case DA9030_USBPUMP_AUTO:
+ val = 0;
+ break;
+ case DA9030_USBPUMP_CHARGE_PUMP:
+ val = 0x40;
+ break;
+ case DA9030_USBPUMP_CURRENT_SOURCE:
+ val = 0x80;
+ break;
+ }
+
+ return da903x_write(da9030_mfd, DA9030_USBPUMP_REG, val);
+}
+EXPORT_SYMBOL_GPL(da9030_set_usb_charge_pump_mode);
+
+static int __devinit da9030_usb_probe(struct platform_device *pdev)
+{
+ da9030_mfd = pdev->dev.parent;
+
+ return 0;
+}
+
+static int __devexit da9030_usb_remove(struct platform_device *pdev)
+{
+ da9030_mfd = NULL;
+ return 0;
+}
+
+static struct platform_driver da9030_usb_driver = {
+ .driver = {
+ .name = "da9030-usb",
+ .owner = THIS_MODULE,
+ },
+ .probe = da9030_usb_probe,
+ .remove = __devexit_p(da9030_usb_remove),
+};
+
+static int __init da9030_usb_init(void)
+{
+ return platform_driver_register(&da9030_usb_driver);
+}
+module_init(da9030_usb_init);
+
+static void __exit da9030_usb_exit(void)
+{
+ platform_driver_unregister(&da9030_usb_driver);
+}
+module_exit(da9030_usb_exit);
+
+MODULE_DESCRIPTION("USB charge pump control driver for Dialog DA9030");
+MODULE_AUTHOR("Jonathan Cameron <jic23@....ac.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform::da9030-usb");
diff --git a/include/linux/mfd/da9030-usbcp.h b/include/linux/mfd/da9030-usbcp.h
new file mode 100644
index 0000000..62af5a7
--- /dev/null
+++ b/include/linux/mfd/da9030-usbcp.h
@@ -0,0 +1,20 @@
+/* linux/mfd/da9030-usbcp.h
+ *
+ * Minimal control driver for the da9030 usb charge pump.
+ *
+ * Jonathan Cameron <jic23@....ac.uk> 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define DA9030_USBPUMP_AUTO 1
+#define DA9030_USBPUMP_CHARGE_PUMP 2
+#define DA9030_USBPUMP_CURRENT_SOURCE 3
+
+#define DA9030_USBPUMP_REG 0x19
+
+int da9030_set_usb_charge_pump_mode(int mode);
+
+
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists