[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20081214110210.3307.38767.stgit@cff.thadambail>
Date: Sun, 14 Dec 2008 16:32:10 +0530
From: Balaji Rao <balajirrao@...nmoko.org>
To: linux-kernel@...r.kernel.org
Cc: Balaji Rao <balajirrao@...nmoko.org>,
Andy Green <andy@...nmoko.com>,
Samuel Ortiz <sameo@...nedhand.com>
Subject: [PATCH 1/7] mfd: PCF50633 core driver
This patch implements the core of the PCF50633 driver. This core driver has
generic register read/write functions and does interrupt management for its
sub devices.
This patch is against linux-2.6.git
Signed-off-by: Balaji Rao <balajirrao@...nmoko.org>
Cc: Andy Green <andy@...nmoko.com>
Cc: Samuel Ortiz <sameo@...nedhand.com>
---
drivers/mfd/Kconfig | 9
drivers/mfd/Makefile | 4
drivers/mfd/pcf50633-core.c | 681 ++++++++++++++++++++++++++++++++++++
include/linux/mfd/pcf50633/adc.h | 88 +++++
include/linux/mfd/pcf50633/core.h | 212 +++++++++++
include/linux/mfd/pcf50633/gpio.h | 52 +++
include/linux/mfd/pcf50633/input.h | 29 ++
include/linux/mfd/pcf50633/led.h | 24 +
include/linux/mfd/pcf50633/mbc.h | 137 +++++++
include/linux/mfd/pcf50633/pmic.h | 75 ++++
include/linux/mfd/pcf50633/rtc.h | 43 ++
11 files changed, 1353 insertions(+), 1 deletions(-)
create mode 100644 drivers/mfd/pcf50633-core.c
create mode 100644 include/linux/mfd/pcf50633/adc.h
create mode 100644 include/linux/mfd/pcf50633/core.h
create mode 100644 include/linux/mfd/pcf50633/gpio.h
create mode 100644 include/linux/mfd/pcf50633/input.h
create mode 100644 include/linux/mfd/pcf50633/led.h
create mode 100644 include/linux/mfd/pcf50633/mbc.h
create mode 100644 include/linux/mfd/pcf50633/pmic.h
create mode 100644 include/linux/mfd/pcf50633/rtc.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8cd3dd9..fb1f0f7 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -153,6 +153,15 @@ config MFD_WM8350_I2C
I2C as the control interface. Additional options must be
selected to enable support for the functionality of the chip.
+config MFD_PCF50633
+ tristate "Support for NXP PCF50633"
+ depends on I2C
+ help
+ Say yes here if you have NXP PCF50633 chip on your board.
+ This core driver provides register access and IRQ handling
+ facilities, and registers devices for the various functions
+ so that function-specific drivers can bind to them.
+
endmenu
menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 9a5ad8a..6a4add8 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -31,4 +31,6 @@ obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o
endif
obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
-obj-$(CONFIG_PMIC_DA903X) += da903x.o
\ No newline at end of file
+obj-$(CONFIG_PMIC_DA903X) += da903x.o
+
+obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
new file mode 100644
index 0000000..5274921
--- /dev/null
+++ b/drivers/mfd/pcf50633-core.c
@@ -0,0 +1,681 @@
+/* NXP PCF50633 Power Management Unit (PMU) driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@...nmoko.org>
+ * Balaji Rao <balajirrao@...nmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/pcf50633/core.h>
+
+static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
+{
+ int ret;
+
+ ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg,
+ num, data);
+ if (ret < 0)
+ dev_err(pcf->dev, "Error reading %d regs at %d\n", num, reg);
+
+ return ret;
+}
+
+static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
+{
+ int ret;
+
+ ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg,
+ num, data);
+ if (ret < 0)
+ dev_err(pcf->dev, "Error writing %d regs at %d\n", num, reg);
+
+ return ret;
+
+}
+
+/* Read a block of upto 32 regs */
+int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
+ int nr_regs, u8 *data)
+{
+ int ret;
+
+ mutex_lock(&pcf->lock);
+
+ ret = __pcf50633_read(pcf, reg, nr_regs, data);
+
+ mutex_unlock(&pcf->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_read_block);
+
+/* Write a block of upto 32 regs */
+int pcf50633_write_block(struct pcf50633 *pcf , u8 reg,
+ int nr_regs, u8 *data)
+{
+ int ret;
+
+ mutex_lock(&pcf->lock);
+
+ ret = __pcf50633_write(pcf, reg, nr_regs, data);
+
+ mutex_unlock(&pcf->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_write_block);
+
+u8 pcf50633_reg_read(struct pcf50633 *pcf, u8 reg)
+{
+ u8 val;
+
+ mutex_lock(&pcf->lock);
+
+ __pcf50633_read(pcf, reg, 1, &val);
+
+ mutex_unlock(&pcf->lock);
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(pcf50633_reg_read);
+
+int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val)
+{
+ int ret;
+
+ mutex_lock(&pcf->lock);
+
+ ret = __pcf50633_write(pcf, reg, 1, &val);
+
+ mutex_unlock(&pcf->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_reg_write);
+
+int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val)
+{
+ int ret;
+ u8 tmp;
+
+ val &= mask;
+
+ mutex_lock(&pcf->lock);
+
+ ret = __pcf50633_read(pcf, reg, 1, &tmp);
+ if (ret < 0)
+ goto out;
+
+ tmp &= ~mask;
+ tmp |= val;
+ ret = __pcf50633_write(pcf, reg, 1, &tmp);
+
+out:
+ mutex_unlock(&pcf->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_reg_set_bit_mask);
+
+int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 val)
+{
+ int ret;
+ u8 tmp;
+
+ mutex_lock(&pcf->lock);
+
+ ret = __pcf50633_read(pcf, reg, 1, &tmp);
+ if (ret < 0)
+ goto out;
+
+ tmp &= ~val;
+ ret = __pcf50633_write(pcf, reg, 1, &tmp);
+
+out:
+ mutex_unlock(&pcf->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_reg_clear_bits);
+
+/* sysfs attributes */
+static ssize_t show_dump_regs(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct pcf50633 *pcf = dev_get_drvdata(dev);
+ u8 dump[16];
+ int n, n1, idx = 0;
+ char *buf1 = buf;
+ static u8 address_no_read[] = { /* must be ascending */
+ PCF50633_REG_INT1,
+ PCF50633_REG_INT2,
+ PCF50633_REG_INT3,
+ PCF50633_REG_INT4,
+ PCF50633_REG_INT5,
+ 0 /* terminator */
+ };
+
+ for (n = 0; n < 256; n += sizeof(dump)) {
+ for (n1 = 0; n1 < sizeof(dump); n1++)
+ if (n == address_no_read[idx]) {
+ idx++;
+ dump[n1] = 0x00;
+ } else
+ dump[n1] = pcf50633_reg_read(pcf, n + n1);
+
+ hex_dump_to_buffer(dump, sizeof(dump), 16, 1, buf1, 128, 0);
+ buf1 += strlen(buf1);
+ *buf1++ = '\n';
+ *buf1 = '\0';
+ }
+
+ return buf1 - buf;
+}
+static DEVICE_ATTR(dump_regs, 0400, show_dump_regs, NULL);
+
+static ssize_t show_resume_reason(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct pcf50633 *pcf = dev_get_drvdata(dev);
+ int n;
+
+ n = sprintf(buf, "%02x%02x%02x%02x%02x\n",
+ pcf->resume_reason[0],
+ pcf->resume_reason[1],
+ pcf->resume_reason[2],
+ pcf->resume_reason[3],
+ pcf->resume_reason[4]);
+
+ return n;
+}
+static DEVICE_ATTR(resume_reason, 0400, show_resume_reason, NULL);
+
+static struct attribute *pcf_sysfs_entries[] = {
+ &dev_attr_dump_regs.attr,
+ &dev_attr_resume_reason.attr,
+ NULL,
+};
+
+static struct attribute_group pcf_attr_group = {
+ .name = NULL, /* put in device directory */
+ .attrs = pcf_sysfs_entries,
+};
+
+
+static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask)
+{
+ u8 reg, bits, tmp;
+ int ret = 0, idx;
+
+ idx = irq >> 3;
+ reg = PCF50633_REG_INT1M + idx;
+ bits = 1 << (irq & 0x07);
+
+ mutex_lock(&pcf->lock);
+
+ if (mask) {
+ ret = __pcf50633_read(pcf, reg, 1, &tmp);
+ if (ret < 0)
+ goto out;
+
+ tmp |= bits;
+
+ ret = __pcf50633_write(pcf, reg, 1, &tmp);
+ if (ret < 0)
+ goto out;
+
+ pcf->mask_regs[idx] &= ~bits;
+ pcf->mask_regs[idx] |= bits;
+ } else {
+ ret = __pcf50633_read(pcf, reg, 1, &tmp);
+ if (ret < 0)
+ goto out;
+
+ tmp &= ~bits;
+
+ ret = __pcf50633_write(pcf, reg, 1, &tmp);
+ if (ret < 0)
+ goto out;
+
+ pcf->mask_regs[idx] &= ~bits;
+ }
+out:
+ mutex_unlock(&pcf->lock);
+
+ return ret;
+}
+
+int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
+{
+ dev_info(pcf->dev, "Masking IRQ %d\n", irq);
+
+ return __pcf50633_irq_mask_set(pcf, irq, 1);
+}
+EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
+
+int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
+{
+ dev_info(pcf->dev, "Unmasking IRQ %d\n", irq);
+
+ return __pcf50633_irq_mask_set(pcf, irq, 0);
+}
+EXPORT_SYMBOL_GPL(pcf50633_irq_unmask);
+
+int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq)
+{
+ u8 reg, bits;
+
+ reg = irq >> 3;
+ bits = 1 << (irq & 0x07);
+
+ return pcf->mask_regs[reg] & bits;
+}
+EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get);
+
+static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq)
+{
+ if (pcf->irq_handler[irq].handler)
+ pcf->irq_handler[irq].handler(pcf, irq,
+ pcf->irq_handler[irq].data);
+}
+
+/* Maximum amount of time ONKEY is held before emergency action is taken */
+#define PCF50633_ONKEY1S_TIMEOUT 8
+
+static void pcf50633_irq_worker(struct work_struct *work)
+{
+ struct pcf50633 *pcf;
+ int ret, i, j;
+ u8 pcf_int[5], chgstat;
+
+ pcf = container_of(work, struct pcf50633, irq_work);
+
+ /* Read the 5 INT regs in one transaction */
+ ret = pcf50633_read_block(pcf, PCF50633_REG_INT1,
+ ARRAY_SIZE(pcf_int), pcf_int);
+ if (ret != ARRAY_SIZE(pcf_int)) {
+ dev_err(pcf->dev, "Error reading INT registers\n");
+
+ /*
+ * If this doesn't ACK the interrupt to the chip, we'll be
+ * called once again as we're level triggered.
+ */
+ goto out;
+ }
+
+ /* We immediately read the usb and adapter status. We thus make sure
+ * only of USBINS/USBREM IRQ handlers are called */
+ if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
+ chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+ if (chgstat & (0x3 << 4))
+ pcf_int[0] &= ~(1 << PCF50633_INT1_USBREM);
+ else
+ pcf_int[0] &= ~(1 << PCF50633_INT1_USBINS);
+ }
+
+ /* Make sure only one of ADPINS or ADPREM is set */
+ if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) {
+ chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+ if (chgstat & (0x3 << 4))
+ pcf_int[0] &= ~(1 << PCF50633_INT1_ADPREM);
+ else
+ pcf_int[0] &= ~(1 << PCF50633_INT1_ADPINS);
+ }
+
+ dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x "
+ "INT4=0x%02x INT5=0x%02x\n", pcf_int[0],
+ pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]);
+
+ /* Some revisions of the chip don't have a 8s standby mode on
+ * ONKEY1S press. We try to manually do it in such cases. */
+ if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) {
+ dev_info(pcf->dev, "ONKEY1S held for %d secs\n",
+ pcf->onkey1s_held);
+ if (pcf->onkey1s_held++ == PCF50633_ONKEY1S_TIMEOUT)
+ if (pcf->pdata->force_shutdown)
+ pcf->pdata->force_shutdown(pcf);
+ }
+
+ if (pcf_int[2] & PCF50633_INT3_ONKEY1S) {
+ dev_info(pcf->dev, "ONKEY1S held\n");
+ pcf->onkey1s_held = 1 ;
+
+ /* Unmask IRQ_SECOND */
+ pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT1M,
+ PCF50633_INT1_SECOND);
+
+ /* Unmask IRQ_ONKEYR */
+ pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT2M,
+ PCF50633_INT2_ONKEYR);
+ }
+
+ if ((pcf_int[1] & PCF50633_INT2_ONKEYR) && pcf->onkey1s_held) {
+ pcf->onkey1s_held = 0;
+
+ /* Mask SECOND and ONKEYR interrupts */
+ if (pcf->mask_regs[0] & PCF50633_INT1_SECOND)
+ pcf50633_reg_set_bit_mask(pcf,
+ PCF50633_REG_INT1M,
+ PCF50633_INT1_SECOND,
+ PCF50633_INT1_SECOND);
+
+ if (pcf->mask_regs[1] & PCF50633_INT2_ONKEYR)
+ pcf50633_reg_set_bit_mask(pcf,
+ PCF50633_REG_INT2M,
+ PCF50633_INT2_ONKEYR,
+ PCF50633_INT2_ONKEYR);
+ }
+
+ /* Have we just resumed ? */
+ if (pcf->is_suspended) {
+ pcf->is_suspended = 0;
+
+ /* Set the resume reason filtering out non resumers */
+ for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
+ pcf->resume_reason[i] = pcf_int[i] &
+ pcf->pdata->resumers[i];
+
+ /* Make sure we don't pass on any ONKEY events to
+ * userspace now */
+ pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pcf_int); i++) {
+ /* Unset masked interrupts */
+ pcf_int[i] &= ~pcf->mask_regs[i];
+
+ for (j = 0; j < 8 ; j++)
+ if (pcf_int[i] & (1 << j))
+ pcf50633_irq_call_handler(pcf, (i * 8) + j);
+ }
+
+out:
+ put_device(pcf->dev);
+ enable_irq(pcf->irq);
+}
+
+static irqreturn_t pcf50633_irq(int irq, void *data)
+{
+ struct pcf50633 *pcf = data;
+
+ dev_dbg(pcf->dev, "pcf50633_irq\n");
+
+ get_device(pcf->dev);
+ disable_irq(pcf->irq);
+ schedule_work(&pcf->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void
+pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
+ struct platform_device **pdev)
+{
+ int ret;
+
+ *pdev = platform_device_alloc(name, -1);
+
+ if (!pdev) {
+ dev_err(pcf->dev, "Falied to allocate %s\n", name);
+ return;
+ }
+
+ (*pdev)->dev.parent = pcf->dev;
+ platform_set_drvdata(*pdev, pcf);
+
+ ret = platform_device_add(*pdev);
+ if (ret) {
+ dev_err(pcf->dev, "Failed to register %s: %d\n", name, ret);
+ platform_device_put(*pdev);
+ *pdev = NULL;
+ }
+}
+
+#ifdef CONFIG_PM
+static int pcf50633_suspend(struct device *dev, pm_message_t state)
+{
+ struct pcf50633 *pcf;
+ int ret = 0, i;
+ u8 res[5];
+
+ pcf = dev_get_drvdata(dev);
+
+ /* Make sure our interrupt handlers are not called
+ * henceforth */
+ disable_irq(pcf->irq);
+
+ /* Make sure that any running IRQ worker has quit */
+ cancel_work_sync(&pcf->irq_work);
+
+ /* Save the masks */
+ ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M,
+ ARRAY_SIZE(pcf->suspend_irq_masks),
+ pcf->suspend_irq_masks);
+ if (ret < 0) {
+ dev_err(pcf->dev, "error saving irq masks\n");
+ goto out;
+ }
+
+ /* Write wakeup irq masks */
+ for (i = 0; i < ARRAY_SIZE(res); i++)
+ res[i] = ~pcf->pdata->resumers[i];
+
+ ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+ ARRAY_SIZE(res), &res[0]);
+ if (ret < 0) {
+ dev_err(pcf->dev, "error writing wakeup irq masks\n");
+ goto out;
+ }
+
+ pcf->is_suspended = 1;
+
+out:
+ return ret;
+}
+
+static int pcf50633_resume(struct device *dev)
+{
+ struct pcf50633 *pcf;
+ int ret;
+
+ pcf = dev_get_drvdata(dev);
+
+ /* Write the saved mask registers */
+ ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+ ARRAY_SIZE(pcf->suspend_irq_masks),
+ pcf->suspend_irq_masks);
+ if (ret < 0)
+ dev_err(pcf->dev, "Error restoring saved suspend masks\n");
+
+ get_device(pcf->dev);
+
+ /*
+ * Clear any pending interrupts and set resume reason if any.
+ * This will leave with enable_irq()
+ */
+ pcf50633_irq_worker(&pcf->irq_work);
+
+ return 0;
+}
+#else
+#define pcf50633_suspend NULL
+#define pcf50633_resume NULL
+#endif
+
+static int pcf50633_probe(struct i2c_client *client,
+ const struct i2c_device_id *ids)
+{
+ struct pcf50633 *pcf;
+ struct pcf50633_platform_data *pdata;
+ int i, ret = 0;
+ int version, variant;
+ u8 mbcs1;
+
+ pdata = client->dev.platform_data;
+
+ pcf = kzalloc(sizeof(*pcf), GFP_KERNEL);
+ if (!pcf)
+ return -ENOMEM;
+
+ pcf->pdata = pdata;
+ pdata->pcf = pcf;
+
+ mutex_init(&pcf->lock);
+
+ i2c_set_clientdata(client, pcf);
+ pcf->dev = &client->dev;
+ pcf->i2c_client = client;
+
+ INIT_WORK(&pcf->irq_work, pcf50633_irq_worker);
+
+ version = pcf50633_reg_read(pcf, 0);
+ variant = pcf50633_reg_read(pcf, 1);
+ if (version < 0 || variant < 0) {
+ dev_err(pcf->dev, "Unable to probe pcf50633\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ dev_info(pcf->dev, "Probed device version %d variant %d\n",
+ version, variant);
+
+ /* Enable all inteerupts except RTC SECOND */
+ pcf->mask_regs[0] = 0x80;
+ pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]);
+ pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00);
+ pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00);
+ pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
+ pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
+
+ pcf50633_client_dev_register(pcf, "pcf50633-input",
+ &pcf->input.pdev);
+ pcf50633_client_dev_register(pcf, "pcf50633-rtc",
+ &pcf->rtc.pdev);
+ pcf50633_client_dev_register(pcf, "pcf50633-mbc",
+ &pcf->mbc.pdev);
+ pcf50633_client_dev_register(pcf, "pcf50633-adc",
+ &pcf->adc.pdev);
+
+ for (i = 0; i < PCF50633_NUM_REGULATORS; i++) {
+ struct platform_device *pdev;
+
+ pdev = platform_device_alloc("pcf50633-regltr", i);
+ if (!pdev) {
+ dev_err(pcf->dev, "Cannot create regulator\n");
+ continue;
+ }
+
+ pdev->dev.parent = pcf->dev;
+ pdev->dev.platform_data = &pdata->reg_init_data[i];
+ pdev->dev.driver_data = pcf;
+ pcf->pmic.pdev[i] = pdev;
+
+ platform_device_add(pdev);
+ }
+
+ pcf->irq = client->irq;
+
+ if (client->irq) {
+ set_irq_handler(client->irq, handle_level_irq);
+ ret = request_irq(client->irq, pcf50633_irq,
+ IRQF_TRIGGER_LOW, "pcf50633", pcf);
+
+ if (ret) {
+ dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
+ goto err;
+ }
+ } else {
+ dev_err(pcf->dev, "No IRQ configured\n");
+ goto err;
+ }
+
+ if (enable_irq_wake(client->irq) < 0)
+ dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
+ "in this hardware revision", client->irq);
+
+ mbcs1 = pcf50633_reg_read(pcf, PCF50633_REG_MBCS1);
+
+ if (mbcs1 & PCF50633_MBCS1_USBPRES)
+ pcf50633_irq_call_handler(pcf, PCF50633_IRQ_USBINS);
+ if (mbcs1 & PCF50633_MBCS1_ADAPTPRES)
+ pcf50633_irq_call_handler(pcf, PCF50633_IRQ_ADPINS);
+
+ ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
+ if (ret)
+ dev_err(pcf->dev, "error creating sysfs entries\n");
+
+ if (pdata->probe_done)
+ pdata->probe_done(pcf);
+
+ return 0;
+
+err:
+ kfree(pcf);
+ return ret;
+}
+
+static int pcf50633_remove(struct i2c_client *client)
+{
+ struct pcf50633 *pcf = i2c_get_clientdata(client);
+
+ free_irq(pcf->irq, pcf);
+ kfree(pcf);
+
+ return 0;
+}
+
+static struct i2c_device_id pcf50633_id_table[] = {
+ {"pcf50633", 0x73},
+};
+
+static struct i2c_driver pcf50633_driver = {
+ .driver = {
+ .name = "pcf50633",
+ .suspend = pcf50633_suspend,
+ .resume = pcf50633_resume,
+ },
+ .id_table = pcf50633_id_table,
+ .probe = pcf50633_probe,
+ .remove = pcf50633_remove,
+};
+
+static int __init pcf50633_init(void)
+{
+ return i2c_add_driver(&pcf50633_driver);
+}
+
+static void pcf50633_exit(void)
+{
+ i2c_del_driver(&pcf50633_driver);
+}
+
+MODULE_DESCRIPTION("I2C chip driver for NXP PCF50633 PMU");
+MODULE_AUTHOR("Harald Welte <laforge@...nmoko.org>");
+MODULE_LICENSE("GPL");
+
+module_init(pcf50633_init);
+module_exit(pcf50633_exit);
diff --git a/include/linux/mfd/pcf50633/adc.h b/include/linux/mfd/pcf50633/adc.h
new file mode 100644
index 0000000..13862bf
--- /dev/null
+++ b/include/linux/mfd/pcf50633/adc.h
@@ -0,0 +1,88 @@
+/*
+ * adc.h -- Driver for NXP PCF50633 ADC
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_ADC_H
+#define __LINUX_MFD_PCF50633_ADC_H
+
+#include <linux/platform_device.h>
+
+/* ADC Registers */
+#define PCF50633_REG_ADCC3 0x52
+#define PCF50633_REG_ADCC2 0x53
+#define PCF50633_REG_ADCC1 0x54
+#define PCF50633_REG_ADCS1 0x55
+#define PCF50633_REG_ADCS2 0x56
+#define PCF50633_REG_ADCS3 0x57
+
+#define PCF50633_ADCC1_ADCSTART 0x01
+#define PCF50633_ADCC1_RES_10BIT 0x02
+#define PCF50633_ADCC1_AVERAGE_NO 0x00
+#define PCF50633_ADCC1_AVERAGE_4 0x04
+#define PCF50633_ADCC1_AVERAGE_8 0x08
+#define PCF50633_ADCC1_AVERAGE_16 0x0c
+#define PCF50633_ADCC1_MUX_BATSNS_RES 0x00
+#define PCF50633_ADCC1_MUX_BATSNS_SUBTR 0x10
+#define PCF50633_ADCC1_MUX_ADCIN2_RES 0x20
+#define PCF50633_ADCC1_MUX_ADCIN2_SUBTR 0x30
+#define PCF50633_ADCC1_MUX_BATTEMP 0x60
+#define PCF50633_ADCC1_MUX_ADCIN1 0x70
+#define PCF50633_ADCC1_AVERAGE_MASK 0x0c
+#define PCF50633_ADCC1_ADCMUX_MASK 0xf0
+
+#define PCF50633_ADCC2_RATIO_NONE 0x00
+#define PCF50633_ADCC2_RATIO_BATTEMP 0x01
+#define PCF50633_ADCC2_RATIO_ADCIN1 0x02
+#define PCF50633_ADCC2_RATIO_BOTH 0x03
+#define PCF50633_ADCC2_RATIOSETTL_100US 0x04
+
+#define PCF50633_ADCC3_ACCSW_EN 0x01
+#define PCF50633_ADCC3_NTCSW_EN 0x04
+#define PCF50633_ADCC3_RES_DIV_TWO 0x10
+#define PCF50633_ADCC3_RES_DIV_THREE 0x00
+
+#define PCF50633_ADCS3_REF_NTCSW 0x00
+#define PCF50633_ADCS3_REF_ACCSW 0x10
+#define PCF50633_ADCS3_REF_2V0 0x20
+#define PCF50633_ADCS3_REF_VISA 0x30
+#define PCF50633_ADCS3_REF_2V0_2 0x70
+#define PCF50633_ADCS3_ADCRDY 0x80
+
+#define PCF50633_ADCS3_ADCDAT1L_MASK 0x03
+#define PCF50633_ADCS3_ADCDAT2L_MASK 0x0c
+#define PCF50633_ADCS3_ADCDAT2L_SHIFT 2
+#define PCF50633_ASCS3_REF_MASK 0x70
+
+
+struct pcf50633;
+
+#define PCF50633_MAX_ADC_FIFO_DEPTH 8
+
+struct pcf50633_adc_request;
+
+struct pcf50633_adc {
+ struct platform_device *pdev;
+
+ /* Private stuff */
+ struct pcf50633_adc_request *queue[PCF50633_MAX_ADC_FIFO_DEPTH];
+ int queue_head;
+ int queue_tail;
+ struct mutex queue_mutex;
+};
+
+extern int
+pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
+ void (*callback)(struct pcf50633 *, void *, int),
+ void *callback_param);
+extern int
+pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg);
+
+#endif /* __LINUX_PCF50633_ADC_H */
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
new file mode 100644
index 0000000..b69ff9c
--- /dev/null
+++ b/include/linux/mfd/pcf50633/core.h
@@ -0,0 +1,212 @@
+/*
+ * core.h -- Core driver for NXP PCF50633
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_CORE_H
+#define __LINUX_MFD_PCF50633_CORE_H
+
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/pcf50633/pmic.h>
+#include <linux/mfd/pcf50633/input.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/rtc.h>
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/gpio.h>
+
+struct pcf50633;
+
+struct pcf50633_platform_data {
+ struct regulator_init_data reg_init_data[PCF50633_NUM_REGULATORS];
+
+ char **batteries;
+ int num_batteries;
+
+ /* Callbacks */
+ void (*probe_done)(struct pcf50633 *);
+ void (*mbc_event_callback)(struct pcf50633 *, int);
+ void (*regulator_registered)(struct pcf50633 *, int);
+ void (*force_shutdown)(struct pcf50633 *);
+
+ u8 resumers[5];
+
+ /* Runtime data - filled by driver afer probe */
+ struct pcf50633 *pcf;
+};
+
+struct pcf50633_irq {
+ void (*handler)(struct pcf50633 *, int, void *);
+ void *data;
+};
+
+int pcf50633_irq_mask(struct pcf50633 *pcf, int irq);
+int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq);
+int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq);
+
+int pcf50633_read_block(struct pcf50633 *, u8 reg,
+ int nr_regs, u8 *data);
+int pcf50633_write_block(struct pcf50633 *pcf, u8 reg,
+ int nr_regs, u8 *data);
+u8 pcf50633_reg_read(struct pcf50633 *, u8 reg);
+int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val);
+
+int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val);
+int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 bits);
+
+/* Interrupt registers */
+
+#define PCF50633_REG_INT1 0x02
+#define PCF50633_REG_INT2 0x03
+#define PCF50633_REG_INT3 0x04
+#define PCF50633_REG_INT4 0x05
+#define PCF50633_REG_INT5 0x06
+
+#define PCF50633_REG_INT1M 0x07
+#define PCF50633_REG_INT2M 0x08
+#define PCF50633_REG_INT3M 0x09
+#define PCF50633_REG_INT4M 0x0a
+#define PCF50633_REG_INT5M 0x0b
+
+enum {
+ /* Chip IRQs */
+ PCF50633_IRQ_ADPINS,
+ PCF50633_IRQ_ADPREM,
+ PCF50633_IRQ_USBINS,
+ PCF50633_IRQ_USBREM,
+ PCF50633_IRQ_RESERVED1,
+ PCF50633_IRQ_RESERVED2,
+ PCF50633_IRQ_ALARM,
+ PCF50633_IRQ_SECOND,
+ PCF50633_IRQ_ONKEYR,
+ PCF50633_IRQ_ONKEYF,
+ PCF50633_IRQ_EXTON1R,
+ PCF50633_IRQ_EXTON1F,
+ PCF50633_IRQ_EXTON2R,
+ PCF50633_IRQ_EXTON2F,
+ PCF50633_IRQ_EXTON3R,
+ PCF50633_IRQ_EXTON3F,
+ PCF50633_IRQ_BATFULL,
+ PCF50633_IRQ_CHGHALT,
+ PCF50633_IRQ_THLIMON,
+ PCF50633_IRQ_THLIMOFF,
+ PCF50633_IRQ_USBLIMON,
+ PCF50633_IRQ_USBLIMOFF,
+ PCF50633_IRQ_ADCRDY,
+ PCF50633_IRQ_ONKEY1S,
+ PCF50633_IRQ_LOWSYS,
+ PCF50633_IRQ_LOWBAT,
+ PCF50633_IRQ_HIGHTMP,
+ PCF50633_IRQ_AUTOPWRFAIL,
+ PCF50633_IRQ_DWN1PWRFAIL,
+ PCF50633_IRQ_DWN2PWRFAIL,
+ PCF50633_IRQ_LEDPWRFAIL,
+ PCF50633_IRQ_LEDOVP,
+ PCF50633_IRQ_LDO1PWRFAIL,
+ PCF50633_IRQ_LDO2PWRFAIL,
+ PCF50633_IRQ_LDO3PWRFAIL,
+ PCF50633_IRQ_LDO4PWRFAIL,
+ PCF50633_IRQ_LDO5PWRFAIL,
+ PCF50633_IRQ_LDO6PWRFAIL,
+ PCF50633_IRQ_HCLDOPWRFAIL,
+ PCF50633_IRQ_HCLDOOVL,
+
+ /* Always last */
+ PCF50633_NUM_IRQ,
+};
+
+struct pcf50633 {
+ struct device *dev;
+ struct i2c_client *i2c_client;
+
+ struct pcf50633_platform_data *pdata;
+ int irq;
+ struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ];
+ struct work_struct irq_work;
+ struct mutex lock;
+
+ u8 mask_regs[5];
+
+ u8 suspend_irq_masks[5];
+ u8 resume_reason[5];
+ int is_suspended;
+
+ int onkey1s_held;
+
+ struct pcf50633_pmic pmic;
+ struct pcf50633_input input;
+ struct pcf50633_mbc mbc;
+ struct pcf50633_rtc rtc;
+ struct pcf50633_adc adc;
+};
+
+enum pcf50633_reg_int1 {
+ PCF50633_INT1_ADPINS = 0x01, /* Adapter inserted */
+ PCF50633_INT1_ADPREM = 0x02, /* Adapter removed */
+ PCF50633_INT1_USBINS = 0x04, /* USB inserted */
+ PCF50633_INT1_USBREM = 0x08, /* USB removed */
+ /* reserved */
+ PCF50633_INT1_ALARM = 0x40, /* RTC alarm time is reached */
+ PCF50633_INT1_SECOND = 0x80, /* RTC periodic second interrupt */
+};
+
+enum pcf50633_reg_int2 {
+ PCF50633_INT2_ONKEYR = 0x01, /* ONKEY rising edge */
+ PCF50633_INT2_ONKEYF = 0x02, /* ONKEY falling edge */
+ PCF50633_INT2_EXTON1R = 0x04, /* EXTON1 rising edge */
+ PCF50633_INT2_EXTON1F = 0x08, /* EXTON1 falling edge */
+ PCF50633_INT2_EXTON2R = 0x10, /* EXTON2 rising edge */
+ PCF50633_INT2_EXTON2F = 0x20, /* EXTON2 falling edge */
+ PCF50633_INT2_EXTON3R = 0x40, /* EXTON3 rising edge */
+ PCF50633_INT2_EXTON3F = 0x80, /* EXTON3 falling edge */
+};
+
+enum pcf50633_reg_int3 {
+ PCF50633_INT3_BATFULL = 0x01, /* Battery full */
+ PCF50633_INT3_CHGHALT = 0x02, /* Charger halt */
+ PCF50633_INT3_THLIMON = 0x04,
+ PCF50633_INT3_THLIMOFF = 0x08,
+ PCF50633_INT3_USBLIMON = 0x10,
+ PCF50633_INT3_USBLIMOFF = 0x20,
+ PCF50633_INT3_ADCRDY = 0x40, /* ADC result ready */
+ PCF50633_INT3_ONKEY1S = 0x80, /* ONKEY pressed 1 second */
+};
+
+enum pcf50633_reg_int4 {
+ PCF50633_INT4_LOWSYS = 0x01,
+ PCF50633_INT4_LOWBAT = 0x02,
+ PCF50633_INT4_HIGHTMP = 0x04,
+ PCF50633_INT4_AUTOPWRFAIL = 0x08,
+ PCF50633_INT4_DWN1PWRFAIL = 0x10,
+ PCF50633_INT4_DWN2PWRFAIL = 0x20,
+ PCF50633_INT4_LEDPWRFAIL = 0x40,
+ PCF50633_INT4_LEDOVP = 0x80,
+};
+
+enum pcf50633_reg_int5 {
+ PCF50633_INT5_LDO1PWRFAIL = 0x01,
+ PCF50633_INT5_LDO2PWRFAIL = 0x02,
+ PCF50633_INT5_LDO3PWRFAIL = 0x04,
+ PCF50633_INT5_LDO4PWRFAIL = 0x08,
+ PCF50633_INT5_LDO5PWRFAIL = 0x10,
+ PCF50633_INT5_LDO6PWRFAIL = 0x20,
+ PCF50633_INT5_HCLDOPWRFAIL = 0x40,
+ PCF50633_INT5_HCLDOOVL = 0x80,
+};
+
+/* misc. registers */
+#define PCF50633_REG_OOCSHDWN 0x0c
+
+#endif
+
diff --git a/include/linux/mfd/pcf50633/gpio.h b/include/linux/mfd/pcf50633/gpio.h
new file mode 100644
index 0000000..33bf7c7
--- /dev/null
+++ b/include/linux/mfd/pcf50633/gpio.h
@@ -0,0 +1,52 @@
+/*
+ * gpio.h -- GPIO driver for NXP PCF50633
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_GPIO_H
+#define __LINUX_MFD_PCF50633_GPIO_H
+
+#define PCF50633_GPIO1 1
+#define PCF50633_GPIO2 2
+#define PCF50633_GPIO3 3
+#define PCF50633_GPO 4
+
+#define PCF50633_REG_GPIO1CFG 0x14
+#define PCF50633_REG_GPIO2CFG 0x15
+#define PCF50633_REG_GPIO3CFG 0x16
+#define PCF50633_REG_GPOCFG 0x17
+
+#define PCF50633_GPOCFG_GPOSEL_MASK 0x07
+
+enum pcf50633_reg_gpocfg {
+ PCF50633_GPOCFG_GPOSEL_0 = 0x00,
+ PCF50633_GPOCFG_GPOSEL_LED_NFET = 0x01,
+ PCF50633_GPOCFG_GPOSEL_SYSxOK = 0x02,
+ PCF50633_GPOCFG_GPOSEL_CLK32K = 0x03,
+ PCF50633_GPOCFG_GPOSEL_ADAPUSB = 0x04,
+ PCF50633_GPOCFG_GPOSEL_USBxOK = 0x05,
+ PCF50633_GPOCFG_GPOSEL_ACTPH4 = 0x06,
+ PCF50633_GPOCFG_GPOSEL_1 = 0x07,
+ PCF50633_GPOCFG_GPOSEL_INVERSE = 0x08,
+};
+
+struct pcf50633;
+
+int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val);
+u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio);
+
+int pcf50633_gpio_invert_set(struct pcf50633 *, int gpio, int invert);
+int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio);
+
+int pcf50633_gpio_power_supply_set(struct pcf50633 *,
+ int gpio, int regulator, int on);
+#endif /* __LINUX_MFD_PCF50633_GPIO_H */
+
+
diff --git a/include/linux/mfd/pcf50633/input.h b/include/linux/mfd/pcf50633/input.h
new file mode 100644
index 0000000..fd10302
--- /dev/null
+++ b/include/linux/mfd/pcf50633/input.h
@@ -0,0 +1,29 @@
+/*
+ * input.h -- Input driver for NXP PCF50633
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_INPUT_H
+#define __LINUX_MFD_PCF50633_INPUT_H
+
+#include <linux/platform_device.h>
+#include <linux/input.h>
+
+#define PCF50633_OOCSTAT_ONKEY 0x01
+#define PCF50633_REG_OOCSTAT 0x12
+#define PCF50633_REG_OOCMODE 0x10
+
+struct pcf50633_input {
+ struct input_dev *input_dev;
+ struct platform_device *pdev;
+};
+
+#endif
+
diff --git a/include/linux/mfd/pcf50633/led.h b/include/linux/mfd/pcf50633/led.h
new file mode 100644
index 0000000..c84a97e
--- /dev/null
+++ b/include/linux/mfd/pcf50633/led.h
@@ -0,0 +1,24 @@
+/*
+ * led.h -- LED driver for NXP PCF50633
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_LED_H
+#define __LINUX_MFD_PCF50633_LED_H
+
+#include <linux/platform_device.h>
+
+#define PCF50633_REG_LEDOUT 0x28
+#define PCF50633_REG_LEDENA 0x29
+#define PCF50633_REG_LEDCTL 0x2a
+#define PCF50633_REG_LEDDIM 0x2b
+
+#endif
+
diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h
new file mode 100644
index 0000000..7843934
--- /dev/null
+++ b/include/linux/mfd/pcf50633/mbc.h
@@ -0,0 +1,137 @@
+/*
+ * mbc.h -- Driver for NXP PCF50633 Main Battery Charger
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_MBC_H
+#define __LINUX_MFD_PCF50633_MBC_H
+
+#include <linux/platform_device.h>
+
+#define PCF50633_REG_MBCC1 0x43
+#define PCF50633_REG_MBCC2 0x44
+#define PCF50633_REG_MBCC3 0x45
+#define PCF50633_REG_MBCC4 0x46
+#define PCF50633_REG_MBCC5 0x47
+#define PCF50633_REG_MBCC6 0x48
+#define PCF50633_REG_MBCC7 0x49
+#define PCF50633_REG_MBCC8 0x4a
+#define PCF50633_REG_MBCS1 0x4b
+#define PCF50633_REG_MBCS2 0x4c
+#define PCF50633_REG_MBCS3 0x4d
+
+enum pcf50633_reg_mbcc1 {
+ PCF50633_MBCC1_CHGENA = 0x01, /* Charger enable */
+ PCF50633_MBCC1_AUTOSTOP = 0x02,
+ PCF50633_MBCC1_AUTORES = 0x04, /* automatic resume */
+ PCF50633_MBCC1_RESUME = 0x08, /* explicit resume cmd */
+ PCF50633_MBCC1_RESTART = 0x10, /* restart charging */
+ PCF50633_MBCC1_PREWDTIME_60M = 0x20, /* max. precharging time */
+ PCF50633_MBCC1_WDTIME_1H = 0x00,
+ PCF50633_MBCC1_WDTIME_2H = 0x40,
+ PCF50633_MBCC1_WDTIME_4H = 0x80,
+ PCF50633_MBCC1_WDTIME_6H = 0xc0,
+};
+#define PCF50633_MBCC1_WDTIME_MASK 0xc0
+
+enum pcf50633_reg_mbcc2 {
+ PCF50633_MBCC2_VBATCOND_2V7 = 0x00,
+ PCF50633_MBCC2_VBATCOND_2V85 = 0x01,
+ PCF50633_MBCC2_VBATCOND_3V0 = 0x02,
+ PCF50633_MBCC2_VBATCOND_3V15 = 0x03,
+ PCF50633_MBCC2_VMAX_4V = 0x00,
+ PCF50633_MBCC2_VMAX_4V20 = 0x28,
+ PCF50633_MBCC2_VRESDEBTIME_64S = 0x80, /* debounce time (32/64sec) */
+};
+
+enum pcf50633_reg_mbcc7 {
+ PCF50633_MBCC7_USB_100mA = 0x00,
+ PCF50633_MBCC7_USB_500mA = 0x01,
+ PCF50633_MBCC7_USB_1000mA = 0x02,
+ PCF50633_MBCC7_USB_SUSPEND = 0x03,
+ PCF50633_MBCC7_BATTEMP_EN = 0x04,
+ PCF50633_MBCC7_BATSYSIMAX_1A6 = 0x00,
+ PCF50633_MBCC7_BATSYSIMAX_1A8 = 0x40,
+ PCF50633_MBCC7_BATSYSIMAX_2A0 = 0x80,
+ PCF50633_MBCC7_BATSYSIMAX_2A2 = 0xc0,
+};
+#define PCF50633_MBCC7_USB_MASK 0x03
+
+enum pcf50633_reg_mbcc8 {
+ PCF50633_MBCC8_USBENASUS = 0x10,
+};
+
+enum pcf50633_reg_mbcs1 {
+ PCF50633_MBCS1_USBPRES = 0x01,
+ PCF50633_MBCS1_USBOK = 0x02,
+ PCF50633_MBCS1_ADAPTPRES = 0x04,
+ PCF50633_MBCS1_ADAPTOK = 0x08,
+ PCF50633_MBCS1_TBAT_OK = 0x00,
+ PCF50633_MBCS1_TBAT_ABOVE = 0x10,
+ PCF50633_MBCS1_TBAT_BELOW = 0x20,
+ PCF50633_MBCS1_TBAT_UNDEF = 0x30,
+ PCF50633_MBCS1_PREWDTEXP = 0x40,
+ PCF50633_MBCS1_WDTEXP = 0x80,
+};
+
+enum pcf50633_reg_mbcs2_mbcmod {
+ PCF50633_MBCS2_MBC_PLAY = 0x00,
+ PCF50633_MBCS2_MBC_USB_PRE = 0x01,
+ PCF50633_MBCS2_MBC_USB_PRE_WAIT = 0x02,
+ PCF50633_MBCS2_MBC_USB_FAST = 0x03,
+ PCF50633_MBCS2_MBC_USB_FAST_WAIT = 0x04,
+ PCF50633_MBCS2_MBC_USB_SUSPEND = 0x05,
+ PCF50633_MBCS2_MBC_ADP_PRE = 0x06,
+ PCF50633_MBCS2_MBC_ADP_PRE_WAIT = 0x07,
+ PCF50633_MBCS2_MBC_ADP_FAST = 0x08,
+ PCF50633_MBCS2_MBC_ADP_FAST_WAIT = 0x09,
+ PCF50633_MBCS2_MBC_BAT_FULL = 0x0a,
+ PCF50633_MBCS2_MBC_HALT = 0x0b,
+};
+#define PCF50633_MBCS2_MBC_MASK 0x0f
+enum pcf50633_reg_mbcs2_chgstat {
+ PCF50633_MBCS2_CHGS_NONE = 0x00,
+ PCF50633_MBCS2_CHGS_ADAPTER = 0x10,
+ PCF50633_MBCS2_CHGS_USB = 0x20,
+ PCF50633_MBCS2_CHGS_BOTH = 0x30,
+};
+#define PCF50633_MBCS2_RESSTAT_AUTO 0x40
+
+enum pcf50633_reg_mbcs3 {
+ PCF50633_MBCS3_USBLIM_PLAY = 0x01,
+ PCF50633_MBCS3_USBLIM_CGH = 0x02,
+ PCF50633_MBCS3_TLIM_PLAY = 0x04,
+ PCF50633_MBCS3_TLIM_CHG = 0x08,
+ PCF50633_MBCS3_ILIM = 0x10, /* 1: Ibat > Icutoff */
+ PCF50633_MBCS3_VLIM = 0x20, /* 1: Vbat == Vmax */
+ PCF50633_MBCS3_VBATSTAT = 0x40, /* 1: Vbat > Vbatcond */
+ PCF50633_MBCS3_VRES = 0x80, /* 1: Vbat > Vth(RES) */
+};
+
+#define PCF50633_MBCC2_VBATCOND_MASK 0x03
+#define PCF50633_MBCC2_VMAX_MASK 0x3c
+
+struct pcf50633;
+
+void pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma);
+
+struct pcf50633_mbc {
+ int adapter_active;
+ int adapter_online;
+ int usb_active;
+ int usb_online;
+
+ struct power_supply usb;
+ struct power_supply adapter;
+
+ struct platform_device *pdev;
+};
+#endif
+
diff --git a/include/linux/mfd/pcf50633/pmic.h b/include/linux/mfd/pcf50633/pmic.h
new file mode 100644
index 0000000..395da7c
--- /dev/null
+++ b/include/linux/mfd/pcf50633/pmic.h
@@ -0,0 +1,75 @@
+#ifndef __LINUX_MFD_PCF50633_PMIC_H
+#define __LINUX_MFD_PCF50633_PMIC_H
+
+#include <linux/platform_device.h>
+
+#define PCF50633_REG_AUTOOUT 0x1a
+#define PCF50633_REG_AUTOENA 0x1b
+#define PCF50633_REG_AUTOCTL 0x1c
+#define PCF50633_REG_AUTOMXC 0x1d
+#define PCF50633_REG_DOWN1OUT 0x1e
+#define PCF50633_REG_DOWN1ENA 0x1f
+#define PCF50633_REG_DOWN1CTL 0x20
+#define PCF50633_REG_DOWN1MXC 0x21
+#define PCF50633_REG_DOWN2OUT 0x22
+#define PCF50633_REG_DOWN2ENA 0x23
+#define PCF50633_REG_DOWN2CTL 0x24
+#define PCF50633_REG_DOWN2MXC 0x25
+#define PCF50633_REG_MEMLDOOUT 0x26
+#define PCF50633_REG_MEMLDOENA 0x27
+#define PCF50633_REG_LDO1OUT 0x2d
+#define PCF50633_REG_LDO1ENA 0x2e
+#define PCF50633_REG_LDO2OUT 0x2f
+#define PCF50633_REG_LDO2ENA 0x30
+#define PCF50633_REG_LDO3OUT 0x31
+#define PCF50633_REG_LDO3ENA 0x32
+#define PCF50633_REG_LDO4OUT 0x33
+#define PCF50633_REG_LDO4ENA 0x34
+#define PCF50633_REG_LDO5OUT 0x35
+#define PCF50633_REG_LDO5ENA 0x36
+#define PCF50633_REG_LDO6OUT 0x37
+#define PCF50633_REG_LDO6ENA 0x38
+#define PCF50633_REG_HCLDOOUT 0x39
+#define PCF50633_REG_HCLDOENA 0x3a
+#define PCF50633_REG_HCLDOOVL 0x40
+
+enum pcf50633_regulator_enable {
+ PCF50633_REGULATOR_ON = 0x01,
+ PCF50633_REGULATOR_ON_GPIO1 = 0x02,
+ PCF50633_REGULATOR_ON_GPIO2 = 0x04,
+ PCF50633_REGULATOR_ON_GPIO3 = 0x08,
+};
+#define PCF50633_REGULATOR_ON_MASK 0x0f
+
+enum pcf50633_regulator_phase {
+ PCF50633_REGULATOR_ACTPH1 = 0x00,
+ PCF50633_REGULATOR_ACTPH2 = 0x10,
+ PCF50633_REGULATOR_ACTPH3 = 0x20,
+ PCF50633_REGULATOR_ACTPH4 = 0x30,
+};
+#define PCF50633_REGULATOR_ACTPH_MASK 0x30
+
+
+enum pcf50633_regulator_id {
+ PCF50633_REGULATOR_AUTO,
+ PCF50633_REGULATOR_DOWN1,
+ PCF50633_REGULATOR_DOWN2,
+ PCF50633_REGULATOR_LDO1,
+ PCF50633_REGULATOR_LDO2,
+ PCF50633_REGULATOR_LDO3,
+ PCF50633_REGULATOR_LDO4,
+ PCF50633_REGULATOR_LDO5,
+ PCF50633_REGULATOR_LDO6,
+ PCF50633_REGULATOR_HCLDO,
+ PCF50633_REGULATOR_MEMLDO,
+
+ PCF50633_NUM_REGULATORS
+};
+
+extern const u8 pcf50633_regulator_registers[];
+
+struct pcf50633_pmic {
+ struct platform_device *pdev[PCF50633_NUM_REGULATORS];
+};
+#endif
+
diff --git a/include/linux/mfd/pcf50633/rtc.h b/include/linux/mfd/pcf50633/rtc.h
new file mode 100644
index 0000000..ce8ad8f
--- /dev/null
+++ b/include/linux/mfd/pcf50633/rtc.h
@@ -0,0 +1,43 @@
+/*
+ * rtc.h -- RTC driver for NXP PCF50633
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_RTC_H
+#define __LINUX_MFD_PCF50633_RTC_H
+
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#define PCF50633_REG_RTCSC 0x59 /* Second */
+#define PCF50633_REG_RTCMN 0x5a /* Minute */
+#define PCF50633_REG_RTCHR 0x5b /* Hour */
+#define PCF50633_REG_RTCWD 0x5c /* Weekday */
+#define PCF50633_REG_RTCDT 0x5d /* Day */
+#define PCF50633_REG_RTCMT 0x5e /* Month */
+#define PCF50633_REG_RTCYR 0x5f /* Year */
+#define PCF50633_REG_RTCSCA 0x60 /* Alarm Second */
+#define PCF50633_REG_RTCMNA 0x61 /* Alarm Minute */
+#define PCF50633_REG_RTCHRA 0x62 /* Alarm Hour */
+#define PCF50633_REG_RTCWDA 0x63 /* Alarm Weekday */
+#define PCF50633_REG_RTCDTA 0x64 /* Alarm Day */
+#define PCF50633_REG_RTCMTA 0x65 /* Alarm Month */
+#define PCF50633_REG_RTCYRA 0x66 /* Alarm Year */
+
+struct pcf50633_rtc {
+ int alarm_enabled;
+ int second_enabled;
+
+ struct rtc_device *rtc_dev;
+ struct platform_device *pdev;
+};
+
+#endif
+
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists