[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800 [ 0.000000] Linux version 2.6.28-rc9-00047-gec4c265 (fcomolli@hawking) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #8 SMP Mon Dec 22 21:03:51 CET 2008 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007feeb000 (ACPI data) [ 0.000000] BIOS-e820: 000000007feeb000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] modified: 000000007fee0000 - 000000007feeb000 (ACPI data) [ 0.000000] modified: 000000007feeb000 - 000000007ff00000 (ACPI NVS) [ 0.000000] modified: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0006000 (reserved) [ 0.000000] modified: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-16000 [ 0.000000] RAMDISK: 37b07000 - 37fef82a [ 0.000000] Allocated new RAMDISK: 00b08000 - 00ff082a [ 0.000000] Move RAMDISK from 0000000037b07000 - 0000000037fef829 to 00b08000 - 00ff0829 [ 0.000000] ACPI: RSDP 000F76A0, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 7FEE5277, 0044 (r1 HP 309E 6040000 LTP 0) [ 0.000000] ACPI: FACP 7FEEAE88, 0074 (r1 HP 309E 6040000 LOHR 5F) [ 0.000000] ACPI: DSDT 7FEE5B1C, 536C (r1 HP 309E 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 7FEFBFC0, 0040 [ 0.000000] ACPI: APIC 7FEEAEFC, 0068 (r1 HP 309E 6040000 LOHR 5F) [ 0.000000] ACPI: BOOT 7FEEAFD8, 0028 (r1 HP 309E 6040000 LTP 1) [ 0.000000] ACPI: MCFG 7FEEAF9C, 003C (r1 HP 309E 6040000 LOHR 5F) [ 0.000000] ACPI: SSDT 7FEE56D3, 0235 (r1 HP 309E 3000 INTL 20030224) [ 0.000000] ACPI: SSDT 7FEE54FB, 01D8 (r1 HP 309E 3001 INTL 20030224) [ 0.000000] ACPI: SSDT 7FEE53E7, 0114 (r1 HP 309E 3000 INTL 20030224) [ 0.000000] ACPI: SSDT 7FEE52BB, 012C (r1 HP 309E 1 INTL 20030224) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1158MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 00000000 - 377fe000 [ 0.000000] bootmap 00012000 - 00018f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 0000b03a28] TEXT DATA BSS ==> [0000100000 - 0000b03a28] [ 0.000000] #4 [0000b04000 - 0000b08000] INIT_PG_TABLE ==> [0000b04000 - 0000b08000] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000b08000 - 0000ff082a] NEW RAMDISK ==> [0000b08000 - 0000ff082a] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007fee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x0007fee0 [ 0.000000] On node 0 totalpages: 523877 [ 0.000000] free_area_init_node: node 0, pgdat c0573940, node_mem_map c1000000 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3917 pages, LIFO batch:0 [ 0.000000] Normal zone: 3052 pages used for memmap [ 0.000000] Normal zone: 220178 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4057 pages used for memmap [ 0.000000] HighMem zone: 292617 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] PERCPU: Allocating 1212416 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516712 [ 0.000000] Kernel command line: root=/dev/sda2 resume=/dev/sda3 i8042.nomux=1 pciehp.pciehp_force=1 quiet splash=silent vga=791 [ 0.000000] bootsplash: silent mode. [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1729.706 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.004000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.004000] ... MAX_LOCK_DEPTH: 48 [ 0.004000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.004000] ... CLASSHASH_SIZE: 4096 [ 0.004000] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.004000] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.004000] ... CHAINHASH_SIZE: 8192 [ 0.004000] memory used by lock dependency info: 2463 kB [ 0.004000] per task-struct memory footprint: 1920 bytes [ 0.004000] ------------------------ [ 0.004000] | Locking API testsuite: [ 0.004000] ---------------------------------------------------------------------------- [ 0.004000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.004000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.004000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.004000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.004000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.004000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.004000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.004000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.004000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.004000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] recursive read-lock: | ok | | ok | [ 0.004000] recursive read-lock #2: | ok | | ok | [ 0.004000] mixed read-write-lock: | ok | | ok | [ 0.004000] mixed write-read-lock: | ok | | ok | [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.004000] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.004000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.004000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.004000] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.004000] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.004000] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.004000] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.004000] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.004000] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.004000] hard-irq lock-inversion/123: ok | ok | ok | [ 0.004000] soft-irq lock-inversion/123: ok | ok | ok | [ 0.004000] hard-irq lock-inversion/132: ok | ok | ok | [ 0.004000] soft-irq lock-inversion/132: ok | ok | ok | [ 0.004000] hard-irq lock-inversion/213: ok | ok | ok | [ 0.004000] soft-irq lock-inversion/213: ok | ok | ok | [ 0.004000] hard-irq lock-inversion/231: ok | ok | ok | [ 0.004000] soft-irq lock-inversion/231: ok | ok | ok | [ 0.004000] hard-irq lock-inversion/312: ok | ok | ok | [ 0.004000] soft-irq lock-inversion/312: ok | ok | ok | [ 0.004000] hard-irq lock-inversion/321: ok | ok | ok | [ 0.004000] soft-irq lock-inversion/321: ok | ok | ok | [ 0.004000] hard-irq read-recursion/123: ok | [ 0.004000] soft-irq read-recursion/123: ok | [ 0.004000] hard-irq read-recursion/132: ok | [ 0.004000] soft-irq read-recursion/132: ok | [ 0.004000] hard-irq read-recursion/213: ok | [ 0.004000] soft-irq read-recursion/213: ok | [ 0.004000] hard-irq read-recursion/231: ok | [ 0.004000] soft-irq read-recursion/231: ok | [ 0.004000] hard-irq read-recursion/312: ok | [ 0.004000] soft-irq read-recursion/312: ok | [ 0.004000] hard-irq read-recursion/321: ok | [ 0.004000] soft-irq read-recursion/321: ok | [ 0.004000] ------------------------------------------------------- [ 0.004000] Good, all 218 testcases passed! | [ 0.004000] --------------------------------- [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 2047412k/2096000k available (2851k kernel code, 47292k reserved, 1830k data, 1428k init, 1186696k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff51000 - 0xfffff000 ( 696 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.004000] .init : 0xc059a000 - 0xc06ff000 (1428 kB) [ 0.004000] .data : 0xc03c8d05 - 0xc0592568 (1830 kB) [ 0.004000] .text : 0xc0100000 - 0xc03c8d05 (2851 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004030] Calibrating delay loop (skipped), value calculated using timer frequency.. 3459.41 BogoMIPS (lpj=6918824) [ 0.004303] Mount-cache hash table entries: 512 [ 0.005192] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.005195] CPU: L2 cache: 2048K [ 0.005199] Intel machine check architecture supported. [ 0.005203] Intel machine check reporting enabled on CPU#0. [ 0.005226] Checking 'hlt' instruction... OK. [ 0.020345] lockdep: fixing up alternatives. [ 0.020348] SMP alternatives: switching to UP code [ 0.109368] ACPI: Core revision 20080926 [ 0.124698] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.166316] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 [ 0.168001] Brought up 1 CPUs [ 0.168001] Total of 1 processors activated (3459.41 BogoMIPS). [ 0.168001] net_namespace: 392 bytes [ 0.168001] NET: Registered protocol family 16 [ 0.168001] ACPI: bus type pci registered [ 0.168001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.168001] PCI: MCFG area at e0000000 reserved in E820 [ 0.168001] PCI: Using MMCONFIG for extended config space [ 0.168001] PCI: Using configuration type 1 for base access [ 0.193329] ACPI: EC: Look up EC in DSDT [ 0.201745] ACPI: Interpreter enabled [ 0.201751] ACPI: (supports S0 S3 S4 S5) [ 0.201815] ACPI: Using IOAPIC for interrupt routing [ 0.210298] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.224296] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62 [ 0.224299] ACPI: EC: driver started in interrupt mode [ 0.224759] ACPI: No dock devices found. [ 0.224791] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.225198] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.225204] pci 0000:00:01.0: PME# disabled [ 0.225364] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.225371] pci 0000:00:1c.0: PME# disabled [ 0.225477] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] [ 0.225574] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] [ 0.225675] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] [ 0.225771] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f] [ 0.225873] pci 0000:00:1d.7: reg 10 32bit mmio: [0xc8000000-0xc80003ff] [ 0.225940] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.225948] pci 0000:00:1d.7: PME# disabled [ 0.226108] pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff] [ 0.226119] pci 0000:00:1e.2: reg 14 io port: [0x1880-0x18bf] [ 0.226130] pci 0000:00:1e.2: reg 18 32bit mmio: [0xc8000800-0xc80009ff] [ 0.226142] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xc8000400-0xc80004ff] [ 0.226183] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold [ 0.226190] pci 0000:00:1e.2: PME# disabled [ 0.226253] pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff] [ 0.226265] pci 0000:00:1e.3: reg 14 io port: [0x2000-0x207f] [ 0.226323] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold [ 0.226329] pci 0000:00:1e.3: PME# disabled [ 0.226475] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.226484] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.226490] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.226532] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.226543] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.226553] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.226564] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.226575] pci 0000:00:1f.1: reg 20 io port: [0x18c0-0x18cf] [ 0.226689] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff] [ 0.226797] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.226806] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] [ 0.226815] pci 0000:01:00.0: reg 18 32bit mmio: [0xc8100000-0xc810ffff] [ 0.226843] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.226855] pci 0000:01:00.0: supports D1 D2 [ 0.226940] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] [ 0.226946] pci 0000:00:01.0: bridge 32bit mmio: [0xc8100000-0xc81fffff] [ 0.226951] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.227039] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] [ 0.227045] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.227056] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 0.227153] pci 0000:06:05.0: reg 10 32bit mmio: [0xc8206000-0xc8206fff] [ 0.227239] pci 0000:06:05.0: PME# supported from D0 D3hot D3cold [ 0.227247] pci 0000:06:05.0: PME# disabled [ 0.227328] pci 0000:06:06.0: reg 10 32bit mmio: [0xc8207000-0xc8207fff] [ 0.227348] pci 0000:06:06.0: supports D1 D2 [ 0.227350] pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.227358] pci 0000:06:06.0: PME# disabled [ 0.227446] pci 0000:06:06.2: reg 10 32bit mmio: [0xc8208000-0xc82087ff] [ 0.227460] pci 0000:06:06.2: reg 14 32bit mmio: [0xc8200000-0xc8203fff] [ 0.227537] pci 0000:06:06.2: supports D1 D2 [ 0.227540] pci 0000:06:06.2: PME# supported from D0 D1 D2 D3hot [ 0.227547] pci 0000:06:06.2: PME# disabled [ 0.227627] pci 0000:06:06.3: reg 10 32bit mmio: [0xc8204000-0xc8205fff] [ 0.227712] pci 0000:06:06.3: supports D1 D2 [ 0.227715] pci 0000:06:06.3: PME# supported from D0 D1 D2 D3hot [ 0.227722] pci 0000:06:06.3: PME# disabled [ 0.227802] pci 0000:06:06.4: reg 10 32bit mmio: [0xc8209000-0xc82090ff] [ 0.227816] pci 0000:06:06.4: reg 14 32bit mmio: [0xc8208c00-0xc8208cff] [ 0.227829] pci 0000:06:06.4: reg 18 32bit mmio: [0xc8208800-0xc82088ff] [ 0.227892] pci 0000:06:06.4: supports D1 D2 [ 0.227894] pci 0000:06:06.4: PME# supported from D0 D1 D2 D3hot [ 0.227902] pci 0000:06:06.4: PME# disabled [ 0.227995] pci 0000:06:07.0: reg 10 io port: [0x4000-0x40ff] [ 0.228017] pci 0000:06:07.0: reg 14 32bit mmio: [0xc8209400-0xc82094ff] [ 0.228092] pci 0000:06:07.0: supports D1 D2 [ 0.228094] pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold [ 0.228102] pci 0000:06:07.0: PME# disabled [ 0.228182] pci 0000:00:1e.0: transparent bridge [ 0.228188] pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff] [ 0.228195] pci 0000:00:1e.0: bridge 32bit mmio: [0xc8200000-0xc82fffff] [ 0.228271] bus 00 -> node 0 [ 0.228287] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.229012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.229379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.229767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.240301] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.240512] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.240722] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.240943] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.241165] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.241384] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.241589] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.241796] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.243573] SCSI subsystem initialized [ 0.243674] libata version 3.00 loaded. [ 0.244254] usbcore: registered new interface driver usbfs [ 0.244402] usbcore: registered new interface driver hub [ 0.244596] usbcore: registered new device driver usb [ 0.245820] PCI: Using ACPI for IRQ routing [ 0.245828] pci 0000:00:1c.0: BAR 7: can't allocate resource [ 0.245838] pci 0000:00:1c.0: BAR 8: can't allocate resource [ 0.245843] pci 0000:00:1c.0: BAR 9: can't allocate resource [ 0.246333] hpet clockevent registered [ 0.246333] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.246333] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.246333] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.248272] pnp: PnP ACPI init [ 0.248272] ACPI: bus type pnp registered [ 0.253957] pnp: PnP ACPI: found 8 devices [ 0.253960] ACPI: ACPI bus type pnp unregistered [ 0.253992] system 00:04: ioport range 0x200-0x20f has been reserved [ 0.253996] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.254000] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.254004] system 00:04: ioport range 0x1180-0x11bf has been reserved [ 0.254010] system 00:04: iomem range 0xe0000000-0xefffffff has been reserved [ 0.254014] system 00:04: iomem range 0xf0000000-0xf0003fff has been reserved [ 0.254018] system 00:04: iomem range 0xf0004000-0xf0004fff has been reserved [ 0.254022] system 00:04: iomem range 0xf0005000-0xf0005fff has been reserved [ 0.254027] system 00:04: iomem range 0xf0008000-0xf000bfff has been reserved [ 0.254031] system 00:04: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.290847] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.290852] pci 0000:00:01.0: IO window: 0x3000-0x3fff [ 0.290859] pci 0000:00:01.0: MEM window: 0xc8100000-0xc81fffff [ 0.290864] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 0.290872] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.290875] pci 0000:00:1c.0: IO window: disabled [ 0.290883] pci 0000:00:1c.0: MEM window: disabled [ 0.290889] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.290907] pci 0000:06:06.0: CardBus bridge, secondary bus 0000:07 [ 0.290910] pci 0000:06:06.0: IO window: 0x004400-0x0044ff [ 0.290918] pci 0000:06:06.0: IO window: 0x004800-0x0048ff [ 0.290926] pci 0000:06:06.0: PREFETCH window: 0x88000000-0x8bffffff [ 0.290934] pci 0000:06:06.0: MEM window: 0x8c000000-0x8fffffff [ 0.290942] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.290946] pci 0000:00:1e.0: IO window: 0x4000-0x4fff [ 0.290955] pci 0000:00:1e.0: MEM window: 0xc8200000-0xc82fffff [ 0.290962] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff [ 0.290987] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.290993] pci 0000:00:01.0: setting latency timer to 64 [ 0.291008] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.291016] pci 0000:00:1c.0: setting latency timer to 64 [ 0.291028] pci 0000:00:1e.0: setting latency timer to 64 [ 0.291045] pci 0000:06:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.291053] pci 0000:06:06.0: setting latency timer to 64 [ 0.291058] bus: 00 index 0 io port: [0x00-0xffff] [ 0.291061] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.291063] bus: 01 index 0 io port: [0x3000-0x3fff] [ 0.291066] bus: 01 index 1 mmio: [0xc8100000-0xc81fffff] [ 0.291068] bus: 01 index 2 mmio: [0xd0000000-0xd7ffffff] [ 0.291071] bus: 01 index 3 mmio: [0x0-0x0] [ 0.291073] bus: 02 index 0 mmio: [0x0-0xfff] [ 0.291075] bus: 02 index 1 mmio: [0x0-0xfffff] [ 0.291077] bus: 02 index 2 mmio: [0x0-0xfffff] [ 0.291079] bus: 02 index 3 mmio: [0x0-0x0] [ 0.291082] bus: 06 index 0 io port: [0x4000-0x4fff] [ 0.291084] bus: 06 index 1 mmio: [0xc8200000-0xc82fffff] [ 0.291086] bus: 06 index 2 mmio: [0x88000000-0x8bffffff] [ 0.291089] bus: 06 index 3 io port: [0x00-0xffff] [ 0.291091] bus: 06 index 4 mmio: [0x000000-0xffffffff] [ 0.291094] bus: 07 index 0 io port: [0x4400-0x44ff] [ 0.291096] bus: 07 index 1 io port: [0x4800-0x48ff] [ 0.291098] bus: 07 index 2 mmio: [0x88000000-0x8bffffff] [ 0.291101] bus: 07 index 3 mmio: [0x8c000000-0x8fffffff] [ 0.291173] NET: Registered protocol family 2 [ 0.291495] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.292427] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.293616] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) [ 0.300376] TCP: Hash tables configured (established 131072 bind 65536) [ 0.300434] TCP reno registered [ 0.300837] NET: Registered protocol family 1 [ 0.301789] checking if image is initramfs... it is [ 0.721728] Freeing initrd memory: 5026k freed [ 0.722125] Simple Boot Flag at 0x36 set to 0x1 [ 0.724283] Microcode Update Driver: v2.00 , Peter Oruba [ 0.725496] highmem bounce pool size: 64 pages [ 0.726535] fuse init (API version 7.10) [ 0.726779] msgmni has been set to 1692 [ 0.727185] alg: No test for cipher_null (cipher_null-generic) [ 0.727318] alg: No test for digest_null (digest_null-generic) [ 0.727381] alg: No test for compress_null (compress_null-generic) [ 0.730771] alg: No test for stdrng (krng) [ 0.730839] io scheduler noop registered [ 0.730889] io scheduler cfq registered (default) [ 0.731072] pci 0000:01:00.0: Boot video device [ 0.736856] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.736929] pcieport-driver 0000:00:01.0: found MSI capability [ 0.736975] pcieport-driver 0000:00:01.0: irq 511 for MSI/MSI-X [ 0.736997] pci_express 0000:00:01.0:pcie00: allocate port service [ 0.737151] pci_express 0000:00:01.0:pcie03: allocate port service [ 0.737373] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.737443] pcieport-driver 0000:00:1c.0: found MSI capability [ 0.737492] pcieport-driver 0000:00:1c.0: irq 510 for MSI/MSI-X [ 0.737518] pci_express 0000:00:1c.0:pcie00: allocate port service [ 0.737674] pci_express 0000:00:1c.0:pcie02: allocate port service [ 0.737817] pci_express 0000:00:1c.0:pcie03: allocate port service [ 0.738309] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.738330] pciehp 0000:00:1c.0:pcie02: Bypassing BIOS check for pciehp use on 0000:00:1c.0 [ 0.738437] pciehp 0000:00:1c.0:pcie02: HPC vendor_id 8086 device_id 2660 ss_vid 0 ss_did 0 [ 0.738841] pciehp 0000:00:1c.0:pcie02: service driver pciehp loaded [ 0.738963] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.740331] vesafb: framebuffer at 0xd0000000, mapped to 0xf8500000, using 6144k, total 16384k [ 0.740334] vesafb: mode is 1024x768x16, linelength=2048, pages=9 [ 0.740337] vesafb: protected mode interface info at c000:aeb4 [ 0.740340] vesafb: pmi: set display start = c00caf42, set palette = c00caf82 [ 0.740342] vesafb: scrolling: redraw [ 0.740345] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.740957] bootsplash 3.1.6-2004/03/31: looking for picture...<7>Switched to high resolution mode on CPU 0 [ 0.757848] silentjpeg size 100719 bytes,<6>...found (1024x768, 38691 bytes, v3). [ 0.841638] Console: switching to colour frame buffer device 124x44 [ 0.922375] fb0: VESA VGA frame buffer device [ 0.924647] ACPI: AC Adapter [AC] (on-line) [ 0.972484] ACPI: Battery Slot [BAT0] (battery present) [ 0.972996] input: Power Button (FF) as /class/input/input0 [ 0.973036] ACPI: Power Button (FF) [PWRF] [ 0.973332] input: Lid Switch as /class/input/input1 [ 0.974814] ACPI: Lid Switch [LID0] [ 0.975078] input: Sleep Button (CM) as /class/input/input2 [ 0.975083] ACPI: Sleep Button (CM) [SLPB] [ 0.975348] input: Power Button (CM) as /class/input/input3 [ 0.975352] ACPI: Power Button (CM) [PWB] [ 0.976653] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 0.976918] processor ACPI_CPU:00: registered as cooling_device0 [ 0.990918] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.996589] ACPI: Thermal Zone [THR0] (87 C) [ 1.005800] thermal LNXTHERM:02: registered as thermal_zone1 [ 1.011525] ACPI: Thermal Zone [THR1] (66 C) [ 1.022680] Linux agpgart interface v0.103 [ 1.022889] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 1.024494] serial 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.024504] serial 0000:00:1e.3: PCI INT B disabled [ 1.030552] brd: module loaded [ 1.033336] loop: module loaded [ 1.033720] tifm_7xx1 0000:06:06.3: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.034219] PPP generic driver version 2.4.2 [ 1.034525] PPP Deflate Compression module registered [ 1.039713] PPP MPPE Compression module registered [ 1.039718] NET: Registered protocol family 24 [ 1.039782] 8139too Fast Ethernet driver 0.9.28 [ 1.039814] 8139too 0000:06:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.041366] eth0: RealTek RTL8139 at 0xf803e400, 00:0a:e4:dd:8b:30, IRQ 20 [ 1.041369] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 1.041634] usbcore: registered new interface driver cdc_ether [ 1.041766] usbcore: registered new interface driver rndis_host [ 1.041781] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmr [ 1.041783] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 1.042095] ipw2200 0000:06:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.042175] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 1.042353] ipw2200 0000:06:05.0: firmware: using built-in firmware ipw2200-bss.fw [ 1.194313] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 1.194634] Driver 'sd' needs updating - please use bus_type methods [ 1.194760] Driver 'sr' needs updating - please use bus_type methods [ 1.195121] ata_piix 0000:00:1f.1: version 2.12 [ 1.195145] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.195348] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.195511] scsi0 : ata_piix [ 1.195938] scsi1 : ata_piix [ 1.197465] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14 [ 1.197469] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15 [ 1.384719] ata1.00: ATA-6: HTS721080G9AT00, MC4OA51A, max UDMA/100 [ 1.384722] ata1.00: 156301488 sectors, multi 16: LBA48 [ 1.384763] ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L532M, HR08, max MWDMA2 [ 1.400660] ata1.00: configured for UDMA/100 [ 1.432503] ata1.01: configured for MWDMA2 [ 1.433405] ata2: port disabled. ignoring. [ 1.434001] scsi 0:0:0:0: Direct-Access ATA HTS721080G9AT00 MC4O PQ: 0 ANSI: 5 [ 1.434790] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 1.434831] sd 0:0:0:0: [sda] Write Protect is off [ 1.434834] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.434905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.435357] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 1.435397] sd 0:0:0:0: [sda] Write Protect is off [ 1.435399] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.435470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.435488] sda: sda1 sda2 sda3 sda4 [ 1.452897] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.453666] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.460480] scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-L532M HR08 PQ: 0 ANSI: 5 [ 1.470185] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.470189] Uniform CD-ROM driver Revision: 3.20 [ 1.470748] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.471082] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.471488] firewire_ohci 0000:06:06.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 1.540013] firewire_ohci: Added fw-ohci device 0000:06:06.2, OHCI version 1.10 [ 1.540576] yenta_cardbus 0000:06:06.0: CardBus bridge found [103c:309d] [ 1.540608] yenta_cardbus 0000:06:06.0: Enabling burst memory read transactions [ 1.540616] yenta_cardbus 0000:06:06.0: Using CSCINT to route CSC interrupts to PCI [ 1.540619] yenta_cardbus 0000:06:06.0: Routing CardBus interrupts to PCI [ 1.540628] yenta_cardbus 0000:06:06.0: TI: mfunc 0x01aa1b02, devctl 0x64 [ 1.773299] yenta_cardbus 0000:06:06.0: ISA IRQ mask 0x0cf8, PCI irq 22 [ 1.773304] yenta_cardbus 0000:06:06.0: Socket status: 30000006 [ 1.773308] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a [ 1.773336] yenta_cardbus 0000:06:06.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 1.773361] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: clean. [ 1.774585] yenta_cardbus 0000:06:06.0: pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff [ 1.774589] yenta_cardbus 0000:06:06.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 2.028272] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.028317] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.028340] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.028345] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.029156] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.033121] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.033130] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.033165] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc8000000 [ 2.040509] firewire_core: created device fw0: GUID 05e40a003c175052, S400 [ 2.048014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.048490] usb usb1: configuration #1 chosen from 1 choice [ 2.048777] hub 1-0:1.0: USB hub found [ 2.048827] hub 1-0:1.0: 8 ports detected [ 2.049844] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.049847] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.049850] usb usb1: Product: EHCI Host Controller [ 2.049852] usb usb1: Manufacturer: Linux 2.6.28-rc9-00047-gec4c265 ehci_hcd [ 2.049855] usb usb1: SerialNumber: 0000:00:1d.7 [ 2.050011] uhci_hcd: USB Universal Host Controller Interface driver [ 2.050062] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.050075] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.050080] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.050255] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.050296] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 [ 2.050646] usb usb2: configuration #1 chosen from 1 choice [ 2.050843] hub 2-0:1.0: USB hub found [ 2.050897] hub 2-0:1.0: 2 ports detected [ 2.051388] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.051391] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.051393] usb usb2: Product: UHCI Host Controller [ 2.051396] usb usb2: Manufacturer: Linux 2.6.28-rc9-00047-gec4c265 uhci_hcd [ 2.051398] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.051439] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.051461] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.051466] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.051646] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.051720] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 2.052108] usb usb3: configuration #1 chosen from 1 choice [ 2.052301] hub 3-0:1.0: USB hub found [ 2.052319] hub 3-0:1.0: 2 ports detected [ 2.052778] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.052781] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.052784] usb usb3: Product: UHCI Host Controller [ 2.052786] usb usb3: Manufacturer: Linux 2.6.28-rc9-00047-gec4c265 uhci_hcd [ 2.052789] usb usb3: SerialNumber: 0000:00:1d.1 [ 2.052824] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.052837] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.052841] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.053013] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.053077] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 2.053444] usb usb4: configuration #1 chosen from 1 choice [ 2.053634] hub 4-0:1.0: USB hub found [ 2.053669] hub 4-0:1.0: 2 ports detected [ 2.054125] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.054128] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.054130] usb usb4: Product: UHCI Host Controller [ 2.054132] usb usb4: Manufacturer: Linux 2.6.28-rc9-00047-gec4c265 uhci_hcd [ 2.054135] usb usb4: SerialNumber: 0000:00:1d.2 [ 2.054172] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 2.054184] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.054189] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.054363] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.054433] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 2.054788] usb usb5: configuration #1 chosen from 1 choice [ 2.054988] hub 5-0:1.0: USB hub found [ 2.055004] hub 5-0:1.0: 2 ports detected [ 2.055465] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.055468] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.055471] usb usb5: Product: UHCI Host Controller [ 2.055473] usb usb5: Manufacturer: Linux 2.6.28-rc9-00047-gec4c265 uhci_hcd [ 2.055475] usb usb5: SerialNumber: 0000:00:1d.3 [ 2.055791] usbcore: registered new interface driver usblp [ 2.055797] Initializing USB Mass Storage driver... [ 2.055966] usbcore: registered new interface driver usb-storage [ 2.055972] USB Mass Storage support registered. [ 2.056302] usbcore: registered new interface driver usbserial [ 2.056430] USB Serial support registered for generic [ 2.056582] usbcore: registered new interface driver usbserial_generic [ 2.056584] usbserial: USB Serial Driver core [ 2.056712] USB Serial support registered for PocketPC PDA [ 2.056892] usbcore: registered new interface driver ipaq [ 2.056894] ipaq: v0.5:USB PocketPC PDA driver [ 2.057021] USB Serial support registered for pl2303 [ 2.057181] usbcore: registered new interface driver pl2303 [ 2.057184] pl2303: Prolific PL2303 USB to serial adaptor driver [ 2.057484] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.063186] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.063215] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.063590] mice: PS/2 mouse device common for all mice [ 2.065349] rtc_cmos 00:05: RTC can wake from S4 [ 2.065639] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.065681] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.065804] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04 [ 2.066145] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 2.066482] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.066770] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 2.067542] cpuidle: using governor ladder [ 2.068838] cpuidle: using governor menu [ 2.069915] Advanced Linux Sound Architecture Driver Version 1.0.18rc3. [ 2.076290] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.076346] Intel ICH 0000:00:1e.2: setting latency timer to 64 [ 2.076950] Marking TSC unstable due to TSC halts in idle [ 2.077641] input: AT Translated Set 2 keyboard as /class/input/input4 [ 2.244022] Clocksource tsc unstable (delta = -179548942 ns) [ 2.346055] input: PS/2 Mouse as /class/input/input5 [ 2.362911] input: AlpsPS/2 ALPS GlidePoint as /class/input/input6 [ 2.624035] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 2.794365] usb 3-1: configuration #1 chosen from 1 choice [ 2.799555] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d [ 2.799558] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.799561] usb 3-1: Product: HP Integrated Module [ 2.799563] usb 3-1: Manufacturer: Broadcom Corp [ 2.976034] intel8x0_measure_ac97_clock: measured 55906 usecs [ 2.976036] intel8x0: measured clock 196 rejected [ 2.976038] intel8x0: clocking to 48000 [ 2.979108] ALSA device list: [ 2.979111] #0: Intel ICH6 with AD1981B at irq 17 [ 2.980390] TCP cubic registered [ 2.980393] Initializing XFRM netlink socket [ 2.980430] NET: Registered protocol family 17 [ 2.980470] NET: Registered protocol family 15 [ 2.980480] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 2.980482] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 2.980497] ieee80211_crypt: registered algorithm 'NULL' [ 2.980500] ieee80211_crypt: registered algorithm 'WEP' [ 2.980503] ieee80211_crypt: registered algorithm 'CCMP' [ 2.980506] ieee80211_crypt: registered algorithm 'TKIP' [ 2.981700] Using IPI No-Shortcut mode [ 2.992277] rtc_cmos 00:05: setting system clock to 2008-12-22 21:06:41 UTC (1229980001) [ 2.993337] Freeing unused kernel memory: 1428k freed [ 3.060386] udevd version 128 started [ 4.070049] PM: Starting manual resume from disk [ 4.466212] kjournald starting. Commit interval 5 seconds [ 4.466634] EXT3 FS on sda2, internal journal [ 4.466865] EXT3-fs: mounted filesystem with ordered data mode. [ 7.281789] udevd version 128 started [ 8.904110] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 8.906203] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 8.907149] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 8.907937] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 8.909157] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 9.301869] Adding 2104504k swap on /dev/sda3. Priority:-1 extents:1 across:2104504k [ 11.650969] kjournald starting. Commit interval 5 seconds [ 11.651302] EXT3 FS on sda4, internal journal [ 11.651314] EXT3-fs: mounted filesystem with ordered data mode. [ 14.332857] ACPI: 'LID0' and 'PS2M' have the same GPE, can't disable/enable one seperately [ 14.340603] ACPI: 'PS2K' and 'PS2M' have the same GPE, can't disable/enable one seperately [ 51.799842] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 51.849549] [fglrx] Maximum main memory to use for locked dma buffers: 1879 MBytes. [ 51.850740] [fglrx] vendor: 1002 device: 5653 count: 1 [ 51.853474] [fglrx] ioport: bar 1, base 0x3000, size: 0x100 [ 51.853598] pci 0000:01:00.0: power state changed by ACPI to D0 [ 51.853608] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 51.853614] pci 0000:01:00.0: setting latency timer to 64 [ 51.854778] [fglrx] Driver built-in PAT support is enabled successfully [ 51.854866] [fglrx] module loaded - fglrx 8.56.4 [Dec 1 2008] with 1 minors [ 54.240633] Cisco Systems VPN Client Version 4.8.02 (0030) kernel module loaded [ 56.086306] bootsplash: status on console 0 changed to on [ 56.389881] [fglrx] Gart USWC size:192 M. [ 56.389888] [fglrx] Gart cacheable size:60 M. [ 56.389904] [fglrx] Reserved FB block: Shared offset:0, size:40000 [ 56.389910] [fglrx] Reserved FB block: Unshared offset:7fb6000, size:45000 [ 56.389917] [fglrx] Reserved FB block: Unshared offset:7ffb000, size:5000 [ 558.508796] [fglrx] It's not necessary to adjust system aperture on this ASIC [ 559.400095] Syncing filesystems ... done. [ 559.400809] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 559.402028] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 559.403405] PM: Shrinking memory... -done (0 pages freed) [ 559.464816] PM: Freed 0 kbytes in 0.06 seconds (0.00 MB/s) [ 559.464839] Suspending console(s) (use no_console_suspend to debug) [ 559.465415] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 559.516188] pciehp 0000:00:1c.0:pcie02: pciehp_suspend ENTRY [ 559.516413] ACPI handle has no context! [ 559.516423] tifm_7xx1 0000:06:06.3: PCI INT A disabled [ 559.516431] ACPI handle has no context! [ 559.532243] ACPI handle has no context! [ 559.548271] eth1: Going into suspend... [ 559.551176] ipw2200 0000:06:05.0: PCI INT A disabled [ 559.551184] ACPI handle has no context! [ 559.564043] [fglrx] Power down the ASIC . [ 559.660052] fglrx_pci 0000:01:00.0: PCI INT A disabled [ 559.660174] ata2: port disabled. ignoring. [ 559.660231] ata_piix 0000:00:1f.1: PCI INT A disabled [ 559.660505] Intel ICH 0000:00:1e.2: PCI INT A disabled [ 559.660643] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 559.660683] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 559.660722] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 559.660761] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 559.660800] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 559.660806] pciehp 0000:00:1c.0:pcie02: pciehp_suspend ENTRY [ 559.661568] ACPI: Preparing to enter system sleep state S4 [ 559.663113] Disabling non-boot CPUs ... [ 559.663192] SCD raw 81220634864 gtod 559660004903 clock 559663113457 now 81223820545 [ 559.663293] PM: Creating hibernation image: [ 559.664005] PM: Need to copy 176823 pages [ 559.664005] Intel machine check architecture supported. [ 559.664005] Intel machine check reporting enabled on CPU#0. [ 612.929722] Force enabled HPET at resume [ 612.929731] SCD raw 36410541237 gtod 612929432462 clock 612929722283 now 36410836846 [ 612.929857] ACPI: Waking up from system sleep state S4 [ 612.929857] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 612.929857] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 612.929857] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 612.929857] pciehp 0000:00:1c.0:pcie02: pciehp_resume ENTRY [ 612.929857] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 612.929857] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 612.929857] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 612.929857] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 612.929857] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 612.929857] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 612.929857] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 612.929857] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 612.929857] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 612.929857] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 612.929857] pci 0000:00:1e.0: setting latency timer to 64 [ 612.929857] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 612.929857] Intel ICH 0000:00:1e.2: setting latency timer to 64 [ 612.929857] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005) [ 612.929857] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 612.929857] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 612.929857] ata2: port disabled. ignoring. [ 612.929857] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0 [ 612.929857] fglrx_pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 612.929857] fglrx_pci 0000:01:00.0: setting latency timer to 64 [ 612.929857] [fglrx] Power up the ASIC [ 612.929857] eth1: Coming out of suspend... [ 612.929857] ipw2200 0000:06:05.0: enabling device (0000 -> 0002) [ 612.929857] ipw2200 0000:06:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 612.929857] ipw2200 0000:06:05.0: restoring config space at offset 0xf (was 0x18030100, writing 0x1803010b) [ 612.929857] ipw2200 0000:06:05.0: restoring config space at offset 0x4 (was 0x0, writing 0xc8206000) [ 612.929857] ipw2200 0000:06:05.0: restoring config space at offset 0x3 (was 0x0, writing 0x8008) [ 612.929857] ipw2200 0000:06:05.0: restoring config space at offset 0x1 (was 0x2900002, writing 0x2900116) [ 612.929857] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out [ 612.929857] ata1.01: ACPI cmd ef/03:22:00:00:00:b0 filtered out [ 612.929857] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 612.929857] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out [ 612.929857] ata1.00: configured for UDMA/100 [ 612.929857] ata1.01: configured for MWDMA2 [ 612.929857] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 612.929857] sd 0:0:0:0: [sda] Write Protect is off [ 612.929857] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 612.929857] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 612.929857] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 612.929857] sd 0:0:0:0: [sda] Write Protect is off [ 612.929857] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 612.929857] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 612.929857] firewire_ohci 0000:06:06.2: restoring config space at offset 0xf (was 0x4020300, writing 0x402030b) [ 612.929857] firewire_ohci 0000:06:06.2: restoring config space at offset 0x5 (was 0x0, writing 0xc8200000) [ 612.929857] firewire_ohci 0000:06:06.2: restoring config space at offset 0x4 (was 0x0, writing 0xc8208000) [ 612.929857] firewire_ohci 0000:06:06.2: restoring config space at offset 0x3 (was 0x800000, writing 0x808008) [ 612.929857] firewire_ohci 0000:06:06.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) [ 612.929857] tifm_7xx1 0000:06:06.3: restoring config space at offset 0xf (was 0x40701ff, writing 0x407010a) [ 612.929857] tifm_7xx1 0000:06:06.3: restoring config space at offset 0x4 (was 0x0, writing 0xc8204000) [ 612.929857] tifm_7xx1 0000:06:06.3: restoring config space at offset 0x3 (was 0x800000, writing 0x808008) [ 612.929857] tifm_7xx1 0000:06:06.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 612.929857] tifm_7xx1 0000:06:06.3: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 612.929857] pciehp 0000:00:1c.0:pcie02: pciehp_resume ENTRY [ 612.929857] sd 0:0:0:0: [sda] Starting disk [ 612.929857] usb 3-1: reset full speed USB device using uhci_hcd and address 2 [ 612.929857] Restarting tasks ... done. [ 612.929857] [fglrx] It's not necessary to adjust system aperture on this ASIC