| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <015101c9647e$97742d00$c65c8700$@net> Date: Mon, 22 Dec 2008 14:45:22 -0700 From: "Kernel" <kernel@...arnic.net> To: <linux-kernel@...r.kernel.org> Subject: RE: Oops in 2.6.28-rc9 and -rc8 -- mtrr issues / e1000e Replying to my own message -- here's today's crash: I did an apachectl stop, box crashed. [root@...3 kernels]# Message from syslogd@ at Mon Dec 22 13:01:40 2008 ... mem3 kernel: Bad page state in process 'httpd' Message from syslogd@ at Mon Dec 22 13:01:41 2008 ... mem3 kernel: page:ffffe2001c398fa8 flags:0x8000000000080008 mapping:0000000000000000 mapcount:855638016 count:0 Message from syslogd@ at Mon Dec 22 13:01:41 2008 ... mem3 kernel: Trying to fix it up, but a reboot is needed Message from syslogd@ at Mon Dec 22 13:01:41 2008 ... mem3 kernel: Backtrace: Broadcast message from root (tty1) (Mon Dec 22 13:01:53 2008): Now this is showing up in /var/log/messages on reboot: Dec 22 13:48:01 mem3 kernel: mysql_error_pag[8063]: segfault at 4e7910a6 ip 0000003942c2ffb8 sp 00007fff6fea77e8 error 4 in libperl.so[3942c00000+12b000] Dec 22 13:49:01 mem3 kernel: mysql_error_pag[8153]: segfault at 4e7910a6 ip 0000003942c2ffb8 sp 00007fff251dab18 error 4 in libperl.so[3942c00000+12b000] Dec 22 13:50:01 mem3 kernel: mysql_error_pag[8160]: segfault at 4e7910a6 ip 0000003942c2ffb8 sp 00007fff436d9018 error 4 in libperl.so[3942c00000+12b000] Doug -----Original Message----- From: linux-kernel-owner@...r.kernel.org [mailto:linux-kernel-owner@...r.kernel.org] On Behalf Of Kernel Sent: Monday, December 22, 2008 2:38 AM To: linux-kernel@...r.kernel.org Subject: Oops in 2.6.28-rc9 and -rc8 -- mtrr issues / e1000e Please forgive my posting newness. If theres anything Im missing, please let me know. Ive got a brand new machine that Im having a terrible time trying to keep up and running with any newer kernels. I have about 8 of these servers that dont have an issue, but theyre running older kernels and or dont have the load of this machine. As of right now, Im running Centos 5.2 x86-64 on a Tyan 5397 MB with (2) Quad Core Intel CPUs, 32GB of ram (16 2GB sticks, ECC FBDIMMS), and a large 24 drive raid on an Adaptec AACRAID card. Right now, Ive got the board back on bios v1.03. Ive tried 1.04 and 1.04beta. Since my other systems dont have this issue, I thought it was a bad MB. It was not. Problems persist on both new boards. X86-64 gets me much longer uptimes than 32bit RHEL 5.2. The e1000es enabled causes the box to crash much, much sooner. I have a feeling their reserved memory is getting stomped on, causing the grief. Memory tests clean, and there are no ECC events listed in bios. Bios 1.04beta did show correct memory sizing in dmidecode, as its fix on Tyans website says DMI Table update. By bypassing the onboard nics (e1000e) and using some older pci-x Intel e1000 cards, I can get the box to stay up for around 11 hours. Sometimes 5, and sometimes 14 hours. If I use the onboard e1000e nics, Ill get a tx_unit_hang error within hours. The server is doing about 300-400 mbits of webserving. Server loads are around 0.4-1.0. I hope this is as simple as me doing something glaringly wrong in the kernel config, and missing something vital. Btw, I get the same crashes in 2.6.27.6 and 2.6.27.9 as well. One of the other servers like this one, doesnt have any issues with 2.6.27.6, RHEL 5.2 32bit. Thanks! Doug Bazarnic Uname: Linux mem3 2.6.28-rc9 #9 SMP Sat Dec 20 18:56:23 MST 2008 x86_64 x86_64 x86_64 GNU/Linux This spits up at the terminal, and box will go down within minutes: root@...3 etc]# Message from syslogd@ at Mon Dec 22 00:40:57 2008 ... mem3 kernel: Bad page state in process 'kswapd0' Message from syslogd@ at Mon Dec 22 00:40:57 2008 ... mem3 kernel: page:ffffe20010b36b88 flags:0x80001a0000010008 mapping:0000000000000000 mapcount:-721420288 count:0 Message from syslogd@ at Mon Dec 22 00:40:57 2008 ... mem3 kernel: Trying to fix it up, but a reboot is needed Message from syslogd@ at Mon Dec 22 00:40:57 2008 ... mem3 kernel: Backtrace: dmesg of the crash shows: (Box must be hard rebooted to come back up reboot or ctrl-alt-del does nothing) Bad page state in process 'kswapd0' page:ffffe20010b36b88 flags:0x80001a0000010008 mapping:0000000000000000 mapcount:-721420288 count:0 Trying to fix it up, but a reboot is needed Backtrace: Pid: 377, comm: kswapd0 Tainted: G W 2.6.28-rc9 #9 Call Trace: [<ffffffff80263bc2>] bad_page+0x6b/0x96 [<ffffffff80264562>] free_hot_cold_page+0xa0/0x192 [<ffffffff80264675>] __pagevec_free+0x21/0x2e [<ffffffff80269281>] shrink_page_list+0x51a/0x608 [<ffffffff802695b0>] shrink_list+0x241/0x501 [<ffffffff8024189b>] bit_waitqueue+0x10/0x8e [<ffffffff80265cb9>] determine_dirtyable_memory+0xd/0x20 [<ffffffff8022acbb>] enqueue_task_fair+0xd6/0xea [<ffffffff80269ad4>] shrink_zone+0x264/0x2e8 [<ffffffff8026a3e2>] kswapd+0x383/0x4c3 [<ffffffff8026823d>] isolate_pages_global+0x0/0x21d [<ffffffff8051b979>] thread_return+0x3d/0xa2 [<ffffffff80241968>] autoremove_wake_function+0x0/0x2e [<ffffffff8026a05f>] kswapd+0x0/0x4c3 [<ffffffff8024184c>] kthread+0x47/0x73 [<ffffffff8022ceb8>] schedule_tail+0x28/0x60 [<ffffffff8020c029>] child_rip+0xa/0x11 [<ffffffff80241805>] kthread+0x0/0x73 [<ffffffff8020c01f>] child_rip+0x0/0x11 Full dmesg on rebooted box: (note the mtrr warnings) BIOS EBDA/lowmem at: 0009a000/0009a000 Linux version 2.6.28-rc9 (root@...alhost.localdomain) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #9 SMP Sat Dec 20 18:56:23 MST 2008 Command line: ro root=LABEL=/ KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009a000 (usable) BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c8000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bff50000 (usable) BIOS-e820: 00000000bff50000 - 00000000bff5f000 (ACPI data) BIOS-e820: 00000000bff5f000 - 00000000bff60000 (ACPI NVS) BIOS-e820: 00000000bff60000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000840000000 (usable) DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0x840000 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 ------------[ cut here ]------------ WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:404 generic_get_mtrr+0xbc/0xf5() mtrr: your BIOS has set up an incorrect mask, fixing it up. Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.28-rc9 #9 Call Trace: [<ffffffff80230b9c>] warn_slowpath+0xf3/0x111 [<ffffffff80231828>] printk+0x8d/0x95 [<ffffffff8021672b>] post_set+0x20/0x3d [<ffffffff80231828>] printk+0x8d/0x95 [<ffffffff80216c07>] generic_get_mtrr+0xbc/0xf5 [<ffffffff806e0d69>] mtrr_trim_uncached_memory+0x7b/0x2fe [<ffffffff806e85a2>] early_gart_iommu_check+0x9e/0x268 [<ffffffff806dd01c>] setup_arch+0x3e9/0x619 [<ffffffff806d6959>] start_kernel+0x6f/0x325 [<ffffffff806d638e>] x86_64_start_kernel+0xde/0xe2 ---[ end trace 4eaa2a86a8e2da22 ]--- last_pfn = 0xbff50 max_arch_pfn = 0x3ffffffff init_memory_mapping: 0000000000000000-00000000bff50000 0000000000 - 00bfe00000 page 2M 00bfe00000 - 00bff50000 page 4k kernel direct mapping tables up to bff50000 @ 10000-15000 last_map_addr: bff50000 end: bff50000 init_memory_mapping: 0000000100000000-0000000840000000 0100000000 - 0840000000 page 2M kernel direct mapping tables up to 840000000 @ 13000-35000 last_map_addr: 840000000 end: 840000000 RAMDISK: 37dd3000 - 37fefa9c ACPI: RSDP 000F7060, 0024 (r2 PTLTD ) ACPI: XSDT BFF58E2F, 009C (r1 PTLTD XSDT 6040000 LTP 0) ACPI: FACP BFF5ED60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3) ACPI: DSDT BFF5A9B9, 4333 (r1 Intel SEABURG 6040000 MSFT 3000000) ACPI: FACS BFF5FFC0, 0040 ACPI: _MAR BFF5EE54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1) ACPI: APIC BFF5EE84, 00C8 (r1 PTLTD APIC 6040000 LTP 0) ACPI: MCFG BFF5EF4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) ACPI: BOOT BFF5EF88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SPCR BFF5EFB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) ACPI: SSDT BFF5A75A, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228) ACPI: SSDT BFF5A6B4, 00A6 (r1 PmRef Cpu7Tst 3000 INTL 20050228) ACPI: SSDT BFF5A60E, 00A6 (r1 PmRef Cpu6Tst 3000 INTL 20050228) ACPI: SSDT BFF5A568, 00A6 (r1 PmRef Cpu5Tst 3000 INTL 20050228) ACPI: SSDT BFF5A4C2, 00A6 (r1 PmRef Cpu4Tst 3000 INTL 20050228) ACPI: SSDT BFF5A41C, 00A6 (r1 PmRef Cpu3Tst 3000 INTL 20050228) ACPI: SSDT BFF5A376, 00A6 (r1 PmRef Cpu2Tst 3000 INTL 20050228) ACPI: SSDT BFF5A2D0, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050228) ACPI: SSDT BFF58ECB, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 0840000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 00007e0f54] TEXT DATA BSS ==> [0000200000 - 00007e0f54] #3 [0037dd3000 - 0037fefa9c] RAMDISK ==> [0037dd3000 - 0037fefa9c] #4 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] #6 [0000013000 - 0000030000] PGTABLE ==> [0000013000 - 0000030000] [ffffe20000000000-ffffe2000f9fffff] PMD -> [ffff880028200000-ffff880037bfffff] on node 0 [ffffe2000fa00000-ffffe2001cdfffff] PMD -> [ffff880038000000-ffff8800453fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00840000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009a 0: 0x00000100 -> 0x000bff50 0: 0x00100000 -> 0x00840000 On node 0 totalpages: 8388314 DMA zone: 56 pages used for memmap DMA zone: 1641 pages reserved DMA zone: 2281 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767880 pages, LIFO batch:31 Normal zone: 103936 pages used for memmap Normal zone: 7498240 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. SMP: Allowing 8 CPUs, 0 hotplug CPUs Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) PERCPU: Allocating 45056 bytes of per cpu data NR_CPUS: 16, nr_cpu_ids: 8, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8268401 Kernel command line: ro root=LABEL=/ Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC: PIT calibration matches PMTIMER. 1 loops Detected 2659.992 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x20000000 - 0x24000000 Memory: 32954916k/34603008k available (3212k kernel code, 1049752k absent, 597392k reserved, 1537k data, 388k init) Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.98 BogoMIPS (lpj=2659992) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Freeing SMP alternatives: 29k freed ACPI: Core revision 20080926 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06 Booting processor 1 APIC 0x4 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5319.27 BogoMIPS (lpj=2659639) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x1 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5319.23 BogoMIPS (lpj=2659618) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x5 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5319.26 BogoMIPS (lpj=2659634) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU3: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Booting processor 4 APIC 0x2 ip 0x6000 Initializing CPU#4 Calibrating delay using timer specific routine.. 5319.24 BogoMIPS (lpj=2659621) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU4: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 CPU4: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#4]: passed. Booting processor 5 APIC 0x6 ip 0x6000 Initializing CPU#5 Calibrating delay using timer specific routine.. 5319.25 BogoMIPS (lpj=2659627) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 2 CPU5: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 CPU5: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#5]: passed. Booting processor 6 APIC 0x3 ip 0x6000 Initializing CPU#6 Calibrating delay using timer specific routine.. 5319.22 BogoMIPS (lpj=2659612) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU6: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 CPU6: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#6]: passed. Booting processor 7 APIC 0x7 ip 0x6000 Initializing CPU#7 Calibrating delay using timer specific routine.. 5319.26 BogoMIPS (lpj=2659633) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 3 CPU7: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 CPU7: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#7]: passed. Brought up 8 CPUs Total of 8 processors activated (42554.75 BogoMIPS). net_namespace: 552 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 31 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e1ffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdc704000-0xdc7043ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1880-0x188f] pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7] pci 0000:00:1f.2: reg 14 io port: [0x18c8-0x18cb] pci 0000:00:1f.2: reg 18 io port: [0x18c0-0x18c7] pci 0000:00:1f.2: reg 1c io port: [0x1894-0x1897] pci 0000:00:1f.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdc704400-0xdc7047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff] pci 0000:01:00.0: reg 10 64bit mmio: [0xdc000000-0xdc1fffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] pci 0000:01:00.0: supports D1 pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xdc1fffff] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:09:00.3: PME# supported from D0 D3hot D3cold pci 0000:09:00.3: PME# disabled pci 0000:00:09.0: bridge io port: [0x2000-0x2fff] pci 0000:00:09.0: bridge 32bit mmio: [0xdc200000-0xdc3fffff] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold pci 0000:0a:00.0: PME# disabled pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold pci 0000:0a:02.0: PME# disabled pci 0000:10:09.0: reg 10 64bit mmio: [0xdc280000-0xdc29ffff] pci 0000:10:09.0: reg 18 64bit mmio: [0xdc200000-0xdc23ffff] pci 0000:10:09.0: reg 20 io port: [0x2000-0x203f] pci 0000:10:09.0: reg 30 32bit mmio: [0x000000-0x03ffff] pci 0000:10:0a.0: reg 10 64bit mmio: [0xdc2a0000-0xdc2bffff] pci 0000:10:0a.0: reg 18 64bit mmio: [0xdc240000-0xdc27ffff] pci 0000:10:0a.0: reg 20 io port: [0x2040-0x207f] pci 0000:10:0a.0: reg 30 32bit mmio: [0x000000-0x03ffff] pci 0000:10:0a.0: PME# supported from D0 D3hot D3cold pci 0000:10:0a.0: PME# disabled pci 0000:09:00.3: bridge io port: [0x2000-0x2fff] pci 0000:09:00.3: bridge 32bit mmio: [0xdc200000-0xdc2fffff] pci 0000:20:05.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff] pci 0000:20:05.0: reg 14 32bit mmio: [0xdc400000-0xdc43ffff] pci 0000:20:05.0: reg 18 io port: [0x3000-0x307f] pci 0000:20:05.0: supports D1 D2 pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xdc400000-0xdc4fffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd8000000-0xdbffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *12 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb dca service started, version 1.4 PCI: Using ACPI for IRQ routing PCI-GART: No AMD GART found. hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x800-0x80f has been reserved system 00:01: ioport range 0x1000-0x107f has been reserved system 00:01: ioport range 0x1180-0x11bf has been reserved system 00:01: ioport range 0xfe00-0xfe00 has been reserved system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xdc000000-0xdc1fffff pci 0000:00:01.0: PREFETCH window: 0x000000c2000000-0x000000c20fffff pci 0000:00:05.0: PCI bridge, secondary bus 0000:05 pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: MEM window: disabled pci 0000:00:05.0: PREFETCH window: disabled pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b pci 0000:0a:00.0: IO window: disabled pci 0000:0a:00.0: MEM window: disabled pci 0000:0a:00.0: PREFETCH window: disabled pci 0000:0a:02.0: PCI bridge, secondary bus 0000:0f pci 0000:0a:02.0: IO window: disabled pci 0000:0a:02.0: MEM window: disabled pci 0000:0a:02.0: PREFETCH window: disabled pci 0000:09:00.0: PCI bridge, secondary bus 0000:0a pci 0000:09:00.0: IO window: disabled pci 0000:09:00.0: MEM window: disabled pci 0000:09:00.0: PREFETCH window: disabled pci 0000:09:00.3: PCI bridge, secondary bus 0000:10 pci 0000:09:00.3: IO window: 0x2000-0x2fff pci 0000:09:00.3: MEM window: 0xdc200000-0xdc2fffff pci 0000:09:00.3: PREFETCH window: 0x000000c2100000-0x000000c21fffff pci 0000:00:09.0: PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: IO window: 0x2000-0x2fff pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff pci 0000:00:09.0: PREFETCH window: 0x000000c2100000-0x000000c21fffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:1f pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:20 pci 0000:00:1e.0: IO window: 0x3000-0x3fff pci 0000:00:1e.0: MEM window: 0xdc400000-0xdc4fffff pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:09.0: setting latency timer to 64 pci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:09:00.0: setting latency timer to 64 pci 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:0a:00.0: setting latency timer to 64 pci 0000:0a:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:0a:02.0: setting latency timer to 64 pci 0000:09:00.3: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] bus: 01 index 0 mmio: [0x0-0x0] bus: 01 index 1 mmio: [0xdc000000-0xdc1fffff] bus: 01 index 2 mmio: [0xc2000000-0xc20fffff] bus: 01 index 3 mmio: [0x0-0x0] bus: 05 index 0 mmio: [0x0-0x0] bus: 05 index 1 mmio: [0x0-0x0] bus: 05 index 2 mmio: [0x0-0x0] bus: 05 index 3 mmio: [0x0-0x0] bus: 09 index 0 io port: [0x2000-0x2fff] bus: 09 index 1 mmio: [0xdc200000-0xdc3fffff] bus: 09 index 2 mmio: [0xc2100000-0xc21fffff] bus: 09 index 3 mmio: [0x0-0x0] bus: 0a index 0 mmio: [0x0-0x0] bus: 0a index 1 mmio: [0x0-0x0] bus: 0a index 2 mmio: [0x0-0x0] bus: 0a index 3 mmio: [0x0-0x0] bus: 0b index 0 mmio: [0x0-0x0] bus: 0b index 1 mmio: [0x0-0x0] bus: 0b index 2 mmio: [0x0-0x0] bus: 0b index 3 mmio: [0x0-0x0] bus: 0f index 0 mmio: [0x0-0x0] bus: 0f index 1 mmio: [0x0-0x0] bus: 0f index 2 mmio: [0x0-0x0] bus: 0f index 3 mmio: [0x0-0x0] bus: 10 index 0 io port: [0x2000-0x2fff] bus: 10 index 1 mmio: [0xdc200000-0xdc2fffff] bus: 10 index 2 mmio: [0xc2100000-0xc21fffff] bus: 10 index 3 mmio: [0x0-0x0] bus: 1f index 0 mmio: [0x0-0x0] bus: 1f index 1 mmio: [0x0-0x0] bus: 1f index 2 mmio: [0x0-0x0] bus: 1f index 3 mmio: [0x0-0x0] bus: 20 index 0 io port: [0x3000-0x3fff] bus: 20 index 1 mmio: [0xdc400000-0xdc4fffff] bus: 20 index 2 mmio: [0xd8000000-0xdbffffff] bus: 20 index 3 io port: [0x00-0xffff] bus: 20 index 4 mmio: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 2162k freed Simple Boot Flag at 0x40 set to 0x80 Microcode Update Driver: v2.00 <tigran@...azian.fsnet.co.uk>, Peter Oruba alg: cipher: Test 1 failed on encryption for aes-asm 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08 audit: initializing netlink socket (disabled) type=2000 audit(1229934097.774:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SGI XFS with security attributes, large block/inode numbers, no debug enabled msgmni has been set to 32768 alg: No test for cipher_null (cipher_null-generic) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:20:05.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pcieport-driver 0000:00:01.0: irq 767 for MSI/MSI-X pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie01: allocate port service pcieport-driver 0000:00:05.0: setting latency timer to 64 pcieport-driver 0000:00:05.0: found MSI capability pcieport-driver 0000:00:05.0: irq 766 for MSI/MSI-X pci_express 0000:00:05.0:pcie00: allocate port service pci_express 0000:00:05.0:pcie01: allocate port service pcieport-driver 0000:00:09.0: setting latency timer to 64 pcieport-driver 0000:00:09.0: found MSI capability pcieport-driver 0000:00:09.0: irq 765 for MSI/MSI-X pci_express 0000:00:09.0:pcie00: allocate port service pci_express 0000:00:09.0:pcie01: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 764 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:09:00.0: setting latency timer to 64 pci_express 0000:09:00.0:pcie11: allocate port service pcieport-driver 0000:0a:00.0: setting latency timer to 64 pcieport-driver 0000:0a:00.0: found MSI capability pcieport-driver 0000:0a:00.0: irq 763 for MSI/MSI-X pci_express 0000:0a:00.0:pcie21: allocate port service pcieport-driver 0000:0a:02.0: setting latency timer to 64 pcieport-driver 0000:0a:02.0: found MSI capability pcieport-driver 0000:0a:02.0: irq 762 for MSI/MSI-X pci_express 0000:0a:02.0:pcie21: allocate port service processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) processor ACPI_CPU:02: registered as cooling_device2 ACPI: Processor [CPU2] (supports 8 throttling states) processor ACPI_CPU:03: registered as cooling_device3 ACPI: Processor [CPU3] (supports 8 throttling states) processor ACPI_CPU:04: registered as cooling_device4 ACPI: Processor [CPU4] (supports 8 throttling states) processor ACPI_CPU:05: registered as cooling_device5 ACPI: Processor [CPU5] (supports 8 throttling states) processor ACPI_CPU:06: registered as cooling_device6 ACPI: Processor [CPU6] (supports 8 throttling states) processor ACPI_CPU:07: registered as cooling_device7 ACPI: Processor [CPU7] (supports 8 throttling states) Non-volatile memory driver v1.2 intel_rng: FWH not detected Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Switched to high resolution mode on CPU 6 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 7 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 4 Switched to high resolution mode on CPU 5 Switched to high resolution mode on CPU 0 serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded Uniform Multi-Platform E-IDE driver Driver 'sd' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit pm led pmp slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, irq 23 ata2: SATA max UDMA/133 abar m1024@...c704400 port 0xdc704580 irq 23 ata3: SATA max UDMA/133 abar m1024@...c704400 port 0xdc704600 irq 23 ata4: SATA max UDMA/133 abar m1024@...c704400 port 0xdc704680 irq 23 ata5: SATA max UDMA/133 abar m1024@...c704400 port 0xdc704700 irq 23 ata6: SATA max UDMA/133 abar m1024@...c704400 port 0xdc704780 irq 23 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: ST3500320AS, SD15, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi6 : ata_piix scsi7 : ata_piix ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 ata8: port disabled. ignoring. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc704000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 drivers/rtc/hctosys.c: unable to open rtc device (rtc) Freeing unused kernel memory: 388k freed Write protecting the kernel read-only data: 4376k EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input0 Adaptec aacraid driver 1.1-5[2456]-ms aacraid 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 aacraid 0000:01:00.0: setting latency timer to 64 input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] Intel(R) PRO/1000 Network Driver - version 8.0.6a Copyright (c) 1999-2008 Intel Corporation. e1000 0000:10:09.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 AAC0: kernel 5.2-0[16343] Nov 20 2008 AAC0: monitor 5.2-0[16343] AAC0: bios 5.2-0[16343] AAC0: serial 8A32108386D AAC0: Non-DASD support enabled. AAC0: 64bit support enabled. AAC0: 64 Bit DAC enabled scsi8 : aacraid scsi 8:0:0:0: Direct-Access Adaptec Mem3 V1.0 PQ: 0 ANSI: 2 sd 8:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). sd 8:0:0:0: [sdb] 13457403904 512-byte hardware sectors: (6.89 TB/6.26 TiB) sd 8:0:0:0: [sdb] Write Protect is off sd 8:0:0:0: [sdb] Mode Sense: 06 00 10 00 sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 8:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). sd 8:0:0:0: [sdb] 13457403904 512-byte hardware sectors: (6.89 TB/6.26 TiB) sd 8:0:0:0: [sdb] Write Protect is off sd 8:0:0:0: [sdb] Mode Sense: 06 00 10 00 sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA sdb: unknown partition table sd 8:0:0:0: [sdb] Attached SCSI removable disk scsi 8:1:0:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:1:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:2:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:3:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:4:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:5:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:6:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:7:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:8:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:9:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:10:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:11:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:12:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:13:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:14:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:15:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:16:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:17:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:18:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:19:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:20:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:21:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:22:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 scsi 8:1:23:0: Direct-Access SEAGATE ST3300655SS S527 PQ: 1 ANSI: 5 e1000: 0000:10:09.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:02:55:53:39:5d e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:10:0a.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25 e1000: 0000:10:0a.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:04:23:b4:c5:fb e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@...hat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. XFS mounting filesystem sdb Starting XFS recovery on filesystem: sdb (logdev: internal) Ending XFS recovery on filesystem: sdb (logdev: internal) Adding 16779884k swap on /dev/sda2. Priority:-1 extents:1 across:16779884k microcode: CPU0 updated from revision 0x60b to 0x60c, date = 2008-01-19 microcode: CPU1 updated from revision 0x60b to 0x60c, date = 2008-01-19 microcode: CPU2 updated from revision 0x60b to 0x60c, date = 2008-01-19 microcode: CPU3 updated from revision 0x60b to 0x60c, date = 2008-01-19 microcode: CPU4 updated from revision 0x60b to 0x60c, date = 2008-01-19 microcode: CPU5 updated from revision 0x60b to 0x60c, date = 2008-01-19 microcode: CPU6 updated from revision 0x60b to 0x60c, date = 2008-01-19 microcode: CPU7 updated from revision 0x60b to 0x60c, date = 2008-01-19 e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX e1000: eth1: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) RPC: Registered udp transport module. RPC: Registered tcp transport module /proc/interrupts: root@...3 ~]# cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 129 3 2 0 0 0 0 0 IO-APIC-edge timer 1: 0 0 0 0 1 0 1 0 IO-APIC-edge i8042 3: 0 0 1 0 0 0 1 0 IO-APIC-edge 4: 1 0 0 0 1 0 0 0 IO-APIC-edge 6: 1 1 0 0 1 1 1 0 IO-APIC-edge floppy 8: 0 0 0 0 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi acpi 12: 3 0 1 1 1 1 0 0 IO-APIC-edge i8042 14: 0 0 0 0 0 0 0 0 IO-APIC-edge ata_piix 15: 0 0 0 0 0 0 0 0 IO-APIC-edge ata_piix 16: 1058 197 352 196 1536 207913 1059 207913 IO-APIC-fasteoi aacraid 20: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 21: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 22: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb4 23: 725 721 729 729 3826 1678 2183 1687 IO-APIC-fasteoi ahci, uhci_hcd:usb5 24: 10 13 12644 13423600 11 14 40205 10 IO-APIC-fasteoi eth0 25: 4 7 1 28174 4 7 6361363 3 IO-APIC-fasteoi eth1 NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts LOC: 2219823 2228500 2216906 2219457 2238783 2236045 2219075 2240538 Local timer interrupts RES: 492 491 414 4089 595 742 1348 891 Rescheduling interrupts CAL: 125 185 184 177 185 184 166 117 Function call interrupts TLB: 3102 2886 3166 73490 3167 13094 25675 14033 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts ERR: 0 MIS: 0 Lspci -nvvv 00:00.0 0600: 8086:4003 (rev 20) Subsystem: 10f1:5397 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Address: fee00000 Data: 0000 Capabilities: [6c] Express Root Port (Slot-) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x4 Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Advanced Error Reporting 00:01.0 0604: 8086:4021 (rev 20) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: dc000000-dc1fffff Prefetchable memory behind bridge: 00000000c2000000-00000000c2000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable+ Address: feeff00c Data: 4161 Capabilities: [6c] Express Root Port (Slot-) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x16, ASPM L0s L1, Port 4 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x8 Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [b0] #0d [0000] Capabilities: [100] Advanced Error Reporting 00:05.0 0604: 8086:4025 (rev 20) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable+ Address: feeff00c Data: 4169 Capabilities: [6c] Express Root Port (Slot-) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x16, ASPM L0s L1, Port 8 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes Disabled CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x0 Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [b0] #0d [0000] Capabilities: [100] Advanced Error Reporting 00:09.0 0604: 8086:4029 (rev 20) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=09, subordinate=10, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: dc200000-dc3fffff Prefetchable memory behind bridge: 00000000c2100000-00000000c2100000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable+ Address: feeff00c Data: 4171 Capabilities: [6c] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x4, ASPM L0s L1, Port 12 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x4 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [b0] #0d [0000] Capabilities: [100] Advanced Error Reporting 00:10.0 0600: 8086:4030 (rev 20) Subsystem: 10f1:5397 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:10.1 0600: 8086:4030 (rev 20) Subsystem: 10f1:5397 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:10.2 0600: 8086:4030 (rev 20) Subsystem: 10f1:5397 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:10.3 0600: 8086:4030 (rev 20) Subsystem: 10f1:5397 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:10.4 0600: 8086:4030 (rev 20) Subsystem: 10f1:5397 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:11.0 0600: 8086:4031 (rev 20) Subsystem: 10f1:5397 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:15.0 0600: 8086:4035 (rev 20) Subsystem: 10f1:5397 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:15.1 0600: 8086:4035 (rev 20) Subsystem: 10f1:5397 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:16.0 0600: 8086:4036 (rev 20) Subsystem: 10f1:5397 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:16.1 0600: 8086:4036 (rev 20) Subsystem: 10f1:5397 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:1c.0 0604: 8086:2690 (rev 09) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=1f, subordinate=1f, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Address: feeff00c Data: 4179 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1d.0 0c03: 8086:2688 (rev 09) Subsystem: 10f1:5397 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1800 [size=32] 00:1d.1 0c03: 8086:2689 (rev 09) Subsystem: 10f1:5397 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1820 [size=32] 00:1d.2 0c03: 8086:268a (rev 09) Subsystem: 10f1:5397 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 1840 [size=32] 00:1d.3 0c03: 8086:268b (rev 09) Subsystem: 10f1:5397 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 4: I/O ports at 1860 [size=32] 00:1d.7 0c03: 8086:268c (rev 09) (prog-if 20) Subsystem: 10f1:5397 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at dc704000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port 00:1e.0 0604: 8086:244e (rev d9) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=20, subordinate=20, sec-latency=32 I/O behind bridge: 00003000-00003fff Memory behind bridge: dc400000-dc4fffff Prefetchable memory behind bridge: 00000000d8000000-00000000dbf00000 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [50] #0d [0000] 00:1f.0 0601: 8086:2670 (rev 09) Subsystem: 10f1:5397 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 0101: 8086:269e (rev 09) (prog-if 8a) Subsystem: 10f1:5397 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1880 [size=16] 00:1f.2 0106: 8086:2681 (rev 09) (prog-if 01) Subsystem: 10f1:5397 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 23 Region 0: I/O ports at 18d0 [size=8] Region 1: I/O ports at 18c8 [size=4] Region 2: I/O ports at 18c0 [size=8] Region 3: I/O ports at 1894 [size=4] Region 4: I/O ports at 18a0 [size=32] Region 5: Memory at dc704400 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] #12 [0010] 00:1f.3 0c05: 8086:269b (rev 09) Subsystem: 10f1:5397 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 23 Region 4: I/O ports at 18e0 [size=32] 01:00.0 0104: 9005:0285 (rev 09) Subsystem: 9005:02d0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=2M] [virtual] Expansion ROM at c2000000 [disabled] [size=512K] Capabilities: [98] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [d0] Express Endpoint IRQ 0 Device: Supported: MaxPayload 512 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s <128ns, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Capabilities: [90] Vital Product Data Capabilities: [100] Advanced Error Reporting 09:00.0 0604: 8086:3500 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=09, secondary=0a, subordinate=0f, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [44] Express Upstream Port IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: SlotPowerLimit 0.000000 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] #0d [0000] Capabilities: [100] Advanced Error Reporting 09:00.3 0604: 8086:350c (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0, Cache Line Size: 64 bytes Bus: primary=09, secondary=10, subordinate=10, sec-latency=64 I/O behind bridge: 00002000-00002fff Memory behind bridge: dc200000-dc2fffff Prefetchable memory behind bridge: 00000000c2100000-00000000c2100000 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 256 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Capabilities: [6c] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] #0d [0000] Capabilities: [d8] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=00:00.3 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 Capabilities: [100] Advanced Error Reporting 0a:00.0 0604: 8086:3510 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [44] Express Downstream Port (Slot-) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 2048 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s <512ns, L1 unlimited Link: ASPM Disabled Disabled CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x0 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+ Address: 00000000feeff00c Data: 4181 Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] #0d [0000] Capabilities: [100] Advanced Error Reporting 0a:02.0 0604: 8086:3518 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=0a, secondary=0f, subordinate=0f, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [44] Express Downstream Port (Slot-) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 2048 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+ Address: 00000000feeff00c Data: 4189 Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] #0d [0000] Capabilities: [100] Advanced Error Reporting 10:09.0 0200: 8086:100f (rev 01) Subsystem: 1014:0269 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 52 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at dc280000 (64-bit, non-prefetchable) [size=128K] Region 2: Memory at dc200000 (64-bit, non-prefetchable) [size=256K] Region 4: I/O ports at 2000 [size=64] [virtual] Expansion ROM at c2100000 [disabled] [size=256K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=10:09.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 10:0a.0 0200: 8086:1026 (rev 04) Subsystem: 8086:1001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 52 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 25 Region 0: Memory at dc2a0000 (64-bit, non-prefetchable) [size=128K] Region 2: Memory at dc240000 (64-bit, non-prefetchable) [size=256K] Region 4: I/O ports at 2040 [size=64] [virtual] Expansion ROM at c2140000 [disabled] [size=256K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=10:0a.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 20:05.0 0300: 18ca:0020 Subsystem: 18ca:0020 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- BIST result: 00 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at dc400000 (32-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 3000 [size=128] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- # dmidecode 2.7 SMBIOS 2.5 present. 61 structures occupying 1876 bytes. Table at 0xBFF60000. Handle 0x0000, DMI type 0, 24 bytes. BIOS Information Vendor: Phoenix Technologies LTD Version: V1.03 Release Date: 05/19/2008 Address: 0xE4D20 Runtime Size: 111328 bytes ROM Size: 1024 kB Characteristics: PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported BIOS Revision: 1.3 Handle 0x0001, DMI type 1, 27 bytes. System Information Manufacturer: Empty Product Name: Empty Version: Empty Serial Number: Empty UUID: 00000000-0000-0000-0000-F0AB0C00C04D Wake-up Type: Power Switch SKU Number: Not Specified Family: Not Specified Handle 0x0002, DMI type 2, 8 bytes. Base Board Information Manufacturer: TYAN Product Name: S5397 Version: 1.0 Serial Number: 0123456789 Handle 0x0003, DMI type 3, 17 bytes. Chassis Information Manufacturer: Empty Type: Other Lock: Not Present Version: Empty Serial Number: Empty Asset Tag: Empty Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 40 bytes. Processor Information Socket Designation: LGA771 Type: Central Processor Family: Pentium II Xeon Manufacturer: Intel ID: 76 06 01 00 FF FB EB BF Signature: Type 0, Family 6, Model 23, Stepping 6 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Voltage: 1.2 V External Clock: Unknown Max Speed: 3800 MHz Current Speed: 2660 MHz Status: Populated, Enabled Upgrade: <OUT OF SPEC> L1 Cache Handle: 0x0006 L2 Cache Handle: 0x0007 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0005, DMI type 4, 40 bytes. Processor Information Socket Designation: . Type: Central Processor Family: Pentium II Xeon Manufacturer: . ID: 76 06 01 00 FF FB EB BF Signature: Type 0, Family 6, Model 23, Stepping 6 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: X Voltage: 1.2 V External Clock: Unknown Max Speed: 3800 MHz Current Speed: 2660 MHz Status: Populated, Enabled Upgrade: <OUT OF SPEC> L1 Cache Handle: 0x0008 L2 Cache Handle: 0x0009 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: <BAD INDEX> Part Number: <BAD INDEX> Handle 0x4C02, DMI type 2, 2 bytes. Base Board Information Handle 0x0007, DMI type 7, 19 bytes. Cache Information Socket Designation: L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 12288 KB Maximum Size: 8192 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0008, DMI type 7, 19 bytes. Cache Information Socket Designation: L1 Cache Configuration: Enabled, Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 16 KB Maximum Size: 16 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0009, DMI type 7, 19 bytes. Cache Information Socket Designation: L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 12288 KB Maximum Size: 8192 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J4 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: COM 1 External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x000B, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J20 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: COM 2 External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x000C, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J1 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: Circular DIN-8 male Port Type: Keyboard Port Handle 0x000D, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: J1 Internal Connector Type: None External Reference Designator: PS/2 Mouse External Connector Type: Circular DIN-8 male Port Type: Keyboard Port Handle 0x000E, DMI type 9, 13 bytes. System Slot Information Designation: PCI/33 Slot #1 - J1B1 Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 5.0 V is provided 3.3 V is provided Handle 0x000F, DMI type 9, 13 bytes. System Slot Information Designation: PCIE Slot #2 - J2B1 Type: 32-bit PCI Express Current Usage: Available Length: Long Characteristics: 5.0 V is provided 3.3 V is provided Handle 0x0010, DMI type 9, 13 bytes. System Slot Information Designation: PCIE Slot #3 - J2B2 Type: 32-bit PCI Express Current Usage: Available Length: Long Characteristics: 5.0 V is provided 3.3 V is provided Handle 0x0011, DMI type 9, 13 bytes. System Slot Information Designation: PCIE Slot #4 - J3B3 Type: 32-bit PCI Express Current Usage: In Use Length: Long Characteristics: 5.0 V is provided 3.3 V is provided Handle 0x0012, DMI type 9, 13 bytes. System Slot Information Designation: PCIE Slot #5 - J3B2 Type: 32-bit PCI-X Current Usage: In Use Length: Long ID: 5 Characteristics: 5.0 V is provided 3.3 V is provided Handle 0x0013, DMI type 9, 13 bytes. System Slot Information Designation: PCIE Slot #6 - J4B1 Type: 32-bit PCI Express Current Usage: Available Length: Long Characteristics: 5.0 V is provided 3.3 V is provided Handle 0x0014, DMI type 10, 6 bytes. On Board Device Information Type: Sound Status: Disabled Description: RealTek Handle 0x0015, DMI type 11, 5 bytes. OEM Strings String 1: 0 String 2: 0 String 3: ......................... Handle 0x0016, DMI type 15, 29 bytes. System Event Log Area Length: 32 bytes Header Start Offset: 0x0000 Header Length: 16 bytes Data Start Offset: 0x0010 Access Method: General-purpose non-volatile data functions Access Address: 0x0000 Status: Valid, Not Full Change Token: 0x0000008F Header Format: Type 1 Supported Log Type Descriptors: 3 Descriptor 1: POST error Data Format 1: POST results bitmap Descriptor 2: Single-bit ECC memory error Data Format 2: Multiple-event Descriptor 3: Multi-bit ECC memory error Data Format 3: Multiple-event Handle 0x0017, DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 64 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0018, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 1573 MB Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM1 Bank Locator: DIMM1 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0019, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 1573 MB Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM2 Bank Locator: DIMM2 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x001A, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 1573 MB Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM3 Bank Locator: DIMM3 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x001B, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 1573 MB Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM4 Bank Locator: DIMM4 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x001C, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 1573 MB Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM5 Bank Locator: DIMM5 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x001D, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 1573 MB Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM6 Bank Locator: DIMM6 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x001E, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 1573 MB Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM7 Bank Locator: DIMM7 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x001F, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 1573 MB Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM8 Bank Locator: DIMM8 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0020, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM9 Bank Locator: DIMM9 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0021, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM10 Bank Locator: DIMM10 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0022, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM11 Bank Locator: DIMM11 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0023, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM12 Bank Locator: DIMM12 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0024, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM13 Bank Locator: DIMM13 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0025, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM14 Bank Locator: DIMM14 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0026, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM15 Bank Locator: DIMM15 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0027, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0017 Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: <OUT OF SPEC> Set: 1 Locator: DIMM16 Bank Locator: DIMM16 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 533 MHz (1.9 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0028, DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x003127FFFFF Range Size: 12584 MB Physical Array Handle: 0x0017 Partition Width: 0 Handle 0x0029, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000624FFFFF Range Size: 1573 MB Physical Device Handle: 0x0018 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x002A, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00062500000 Ending Address: 0x000C49FFFFF Range Size: 1573 MB Physical Device Handle: 0x0019 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x002B, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x000C4A00000 Ending Address: 0x00126EFFFFF Range Size: 1573 MB Physical Device Handle: 0x001A Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x002C, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00126F00000 Ending Address: 0x001893FFFFF Range Size: 1573 MB Physical Device Handle: 0x001B Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x002D, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00189400000 Ending Address: 0x001EB8FFFFF Range Size: 1573 MB Physical Device Handle: 0x001C Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x002E, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x001EB900000 Ending Address: 0x0024DDFFFFF Range Size: 1573 MB Physical Device Handle: 0x001D Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x002F, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x0024DE00000 Ending Address: 0x002B02FFFFF Range Size: 1573 MB Physical Device Handle: 0x001E Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0030, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x002B0300000 Ending Address: 0x003127FFFFF Range Size: 1573 MB Physical Device Handle: 0x001F Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0031, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x003127FFC00 Ending Address: 0x003127FFFFF Range Size: 1 kB Physical Device Handle: 0x0020 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0032, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x003127FFC00 Ending Address: 0x003127FFFFF Range Size: 1 kB Physical Device Handle: 0x0021 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0033, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x003127FFC00 Ending Address: 0x003127FFFFF Range Size: 1 kB Physical Device Handle: 0x0022 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0034, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x003127FFC00 Ending Address: 0x003127FFFFF Range Size: 1 kB Physical Device Handle: 0x0023 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0035, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x003127FFC00 Ending Address: 0x003127FFFFF Range Size: 1 kB Physical Device Handle: 0x0024 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0036, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x003127FFC00 Ending Address: 0x003127FFFFF Range Size: 1 kB Physical Device Handle: 0x0025 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0037, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x003127FFC00 Ending Address: 0x003127FFFFF Range Size: 1 kB Physical Device Handle: 0x0026 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0038, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x003127FFC00 Ending Address: 0x003127FFFFF Range Size: 1 kB Physical Device Handle: 0x0027 Memory Array Mapped Address Handle: 0x0028 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0039, DMI type 23, 13 bytes. System Reset Status: Enabled Watchdog Timer: Present Boot Option: Do Not Reboot Boot Option On Limit: Do Not Reboot Reset Count: Unknown Reset Limit: Unknown Timer Interval: Unknown Timeout: Unknown Handle 0x003A, DMI type 32, 20 bytes. System Boot Information Status: <OUT OF SPEC> Handle 0x003B, DMI type 38, 18 bytes. IPMI Device Information Interface Type: Unknown Specification Version: 0.0 I2C Slave Address: 0x00 NV Storage Device: Not Present Base Address: 0x0000000000000000 (Memory-mapped) Register Spacing: Successive Byte Boundaries Interrupt Polarity: Active Low Interrupt Trigger Mode: Edge Handle 0x003C, DMI type 127, 4 bytes. End Of Table .config: CONFIG_64BIT=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BLACKLIST_YEAR=0 CONFIG_ACPI_BUTTON=m CONFIG_ACPI_DOCK=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y CONFIG_AGP_SIS=y CONFIG_AGP_VIA=y CONFIG_AGP=y CONFIG_AIO=y CONFIG_AMIGA_PARTITION=y CONFIG_ANON_INODES=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_ATA_ACPI=y CONFIG_ATA_PIIX=y CONFIG_ATA_SFF=y CONFIG_ATA=y CONFIG_AUDIT_ARCH=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y CONFIG_AUDIT=y CONFIG_AUTOFS4_FS=y CONFIG_BASE_FULL=y CONFIG_BASE_SMALL=0 CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_BITREVERSE=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_DM=m CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_IDEDMA_SFF=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_IDESCSI=m CONFIG_BLK_DEV_INITRD=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_MD=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_PIIX=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV=y CONFIG_BLOCK_COMPAT=y CONFIG_BLOCK=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_BOUNCE=y CONFIG_BSD_DISKLABEL=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BUG=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_CLASSIC_RCU=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_COMPAT_BRK=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_COMPAT_VDSO=y CONFIG_COMPAT=y CONFIG_CONFIGFS_FS=m CONFIG_CONNECTOR=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR_64=y CONFIG_CPU_SUP_INTEL=y CONFIG_CRAMFS=m CONFIG_CRC16=y CONFIG_CRC32=y CONFIG_CRC_CCITT=m CONFIG_CRC_ITU_T=m CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AES_X86_64=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_CAST5=y CONFIG_CRYPTO_CAST6=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_TGR192=y CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_XCBC=y CONFIG_CRYPTO=y CONFIG_DCA=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_RODATA=y CONFIG_DEFAULT_CFQ=y CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEVKMEM=y CONFIG_DEVPORT=y CONFIG_DLM_DEBUG=y CONFIG_DLM=m CONFIG_DMADEVICES=y CONFIG_DMA_ENGINE=y CONFIG_DMAR_FLOPPY_WA=y CONFIG_DMAR_GFX_WA=y CONFIG_DMAR=y CONFIG_DM_CRYPT=m CONFIG_DMIID=y CONFIG_DMI=y CONFIG_DM_MIRROR=m CONFIG_DM_MULTIPATH=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_UEVENT=y CONFIG_DM_ZERO=m CONFIG_DNOTIFY=y CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY=m CONFIG_E1000=m CONFIG_EARLY_PRINTK=y CONFIG_EDAC_E752X=m CONFIG_EDAC_I3000=m CONFIG_EDAC_I5000=m CONFIG_EDAC_MM_EDAC=m CONFIG_EDAC=y CONFIG_EDD=m CONFIG_EFI_PARTITION=y CONFIG_ELF_CORE=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_EPOLL=y CONFIG_EVENTFD=y CONFIG_EXPERIMENTAL=y CONFIG_EXPORTFS=m CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_XIP=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_FAT_FS=m CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_DDC=m CONFIG_FB_INTEL_I2C=y CONFIG_FB_INTEL=m CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_VESA=y CONFIG_FB=y CONFIG_FILE_LOCKING=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_FIRMWARE_MEMMAP=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_FONT_8x16=y CONFIG_FONT_8x8=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAME_WARN=2048 CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_FS_XIP=y CONFIG_FTL=m CONFIG_FUTEX=y CONFIG_FW_LOADER=y CONFIG_GART_IOMMU=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_TIME=y CONFIG_HANGCHECK_TIMER=m CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_IDE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_KVM=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_COMPAT=y CONFIG_HID_CYPRESS=y CONFIG_HID_DEBUG=y CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y CONFIG_HID_PANTHERLORD=y CONFIG_HID_PETALYNX=y CONFIG_HID_PID=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HIGH_RES_TIMERS=y CONFIG_HOTPLUG=y CONFIG_HPET_EMULATE_RTC=y CONFIG_HPET_TIMER=y CONFIG_HPET=y CONFIG_HT_IRQ=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_HW_CONSOLE=y CONFIG_HWMON=m CONFIG_HWMON_VID=m CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM=y CONFIG_HZ=1000 CONFIG_HZ_1000=y CONFIG_I2C_ALGOBIT=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_I801=y CONFIG_I2C=y CONFIG_IA32_AOUT=y CONFIG_IA32_EMULATION=y CONFIG_IDE_ATAPI=y CONFIG_IDE_PROC_FS=y CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE=y CONFIG_IKCONFIG=y CONFIG_INET_DIAG=y CONFIG_INET_LRO=y CONFIG_INET_TCP_DIAG=y CONFIG_INET=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_INITRAMFS_SOURCE="" CONFIG_INOTIFY_USER=y CONFIG_INOTIFY=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_KEYBOARD=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSE=y CONFIG_INPUT_PCSPKR=m CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_UINPUT=m CONFIG_INPUT=y CONFIG_INTEL_IOATDMA=y CONFIG_INTR_REMAP=y CONFIG_IO_DELAY_0X80=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IOMMU_HELPER=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_CFQ=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_NOOP=y CONFIG_IPC_NS=y CONFIG_IP_FIB_HASH=y CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_HANDLER=m CONFIG_IPMI_PANIC_EVENT=y CONFIG_IPMI_PANIC_STRING=y CONFIG_IPMI_POWEROFF=m CONFIG_IPMI_SI=m CONFIG_IPMI_WATCHDOG=m CONFIG_IP_SCTP=m CONFIG_ISA_DMA_API=y CONFIG_ISO9660_FS=y CONFIG_JBD2=y CONFIG_JBD=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_WRITEBUFFER=y CONFIG_JFFS2_RTIME=y CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_ZLIB=y CONFIG_JOLIET=y CONFIG_K8_NB=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_KALLSYMS=y CONFIG_KARMA_PARTITION=y CONFIG_KEYBOARD_ATKBD=y CONFIG_KMOD=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LIBCRC32C=y CONFIG_LOCALVERSION="" CONFIG_LOCKDEP_SUPPORT=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_LOCK_KERNEL=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_LOGITECH_FF=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO=y CONFIG_MAC_PARTITION=y CONFIG_MAGIC_SYSRQ=y CONFIG_MAX_RAW_DEVS=8192 CONFIG_MCORE2=y CONFIG_MD_AUTODETECT=y CONFIG_MD_FAULTY=m CONFIG_MD_LINEAR=m CONFIG_MD_MULTIPATH=m CONFIG_MD_RAID0=m CONFIG_MD_RAID10=m CONFIG_MD_RAID1=m CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD=y CONFIG_MEDIA_TUNER=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MICROCODE_INTEL=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_MICROCODE=y CONFIG_MINIX_SUBPARTITION=y CONFIG_MISC_DEVICES=y CONFIG_MMU=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_VSXXXAA=m CONFIG_MSDOS_FS=m CONFIG_MSDOS_PARTITION=y CONFIG_MTD_ABSENT=m CONFIG_MTD_BLKDEVS=m CONFIG_MTD_BLOCK2MTD=m CONFIG_MTD_BLOCK=m CONFIG_MTD_BLOCK_RO=m CONFIG_MTD_CFI_AMDSTD=m CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=m CONFIG_MTD_CFI=m CONFIG_MTD_CFI_STAA=m CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_CHAR=m CONFIG_MTD_CONCAT=m CONFIG_MTD_GEN_PROBE=m CONFIG_MTD_JEDECPROBE=m CONFIG_MTD=m CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y CONFIG_MTD_MTDRAM=m CONFIG_MTD_NAND_DISKONCHIP=m CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 CONFIG_MTD_NAND_ECC_SMC=y CONFIG_MTD_NAND_IDS=m CONFIG_MTD_NAND=m CONFIG_MTD_NAND_NANDSIM=m CONFIG_MTD_NETSC520=m CONFIG_MTD_PARTITIONS=y CONFIG_MTDRAM_ERASE_SIZE=128 CONFIG_MTD_RAM=m CONFIG_MTDRAM_TOTAL_SIZE=4096 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_ROM=m CONFIG_MTD_SC520CDP=m CONFIG_MTD_SCB2_FLASH=m CONFIG_MTD_TS5500=m CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_MTRR_SANITIZER=y CONFIG_MTRR=y CONFIG_NAMESPACES=y CONFIG_NETDEV_1000=y CONFIG_NETDEVICES=y CONFIG_NET_DMA=y CONFIG_NET_KEY=m CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NETWORK_SECMARK=y CONFIG_NET=y CONFIG_NEW_LEDS=y CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V4=y CONFIG_NFS_FS=m CONFIG_NFS_V3_ACL=y CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_NFTL=m CONFIG_NFTL_RW=y CONFIG_NLS_ASCII=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_UTF8=y CONFIG_NLS=y CONFIG_NR_CPUS=16 CONFIG_NSC_GPIO=m CONFIG_NVRAM=y CONFIG_OSF_PARTITION=y CONFIG_PACKET_MMAP=y CONFIG_PACKET=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_PARTITION_ADVANCED=y CONFIG_PATA_SCH=m CONFIG_PC8736x_GPIO=m CONFIG_PCI_DIRECT=y CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_MSI=y CONFIG_PCI_QUIRKS=y CONFIG_PCI=y CONFIG_PCSPKR_PLATFORM=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_PHYSICAL_START=0x200000 CONFIG_PLIST=y CONFIG_PM=y CONFIG_PNPACPI=y CONFIG_PNP_DEBUG_MESSAGES=y CONFIG_PNP=y CONFIG_POSIX_MQUEUE=y CONFIG_POWER_SUPPLY=y CONFIG_PREEMPT_NONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_PRINTK=y CONFIG_PRINT_QUOTA_WARNING=y CONFIG_PROC_EVENTS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_SYSCTL=y CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_QUOTA=y CONFIG_RAID_ATTRS=y CONFIG_RAW_DRIVER=y CONFIG_REED_SOLOMON_DEC16=y CONFIG_REED_SOLOMON=m CONFIG_RELAY=y CONFIG_RESOURCES_64BIT=y CONFIG_RFD_FTL=m CONFIG_RFKILL_LEDS=y CONFIG_RFKILL=m CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_CMOS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc" CONFIG_RTC_HCTOSYS=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_LIB=y CONFIG_RT_MUTEXES=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_SATA_AHCI=y CONFIG_SATA_PMP=y CONFIG_SCHED_HRTICK=y CONFIG_SCHED_MC=y CONFIG_SCSI_AACRAID=m CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_DMA=y CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_LOGGING=y CONFIG_SCSI_LOWLEVEL=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI=y CONFIG_SCTP_HMAC_MD5=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_EEPROM=y CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_FSCHER=m CONFIG_SENSORS_FSCPOS=m CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_HDAPS=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM63=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_SMSC47B397=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT8231=m CONFIG_SENSORS_W83627EHF=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m CONFIG_SENSORS_W83L785TS=m CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_JSM=m CONFIG_SERIO_I8042=y CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m CONFIG_SERIO_SERPORT=y CONFIG_SERIO=y CONFIG_SGI_PARTITION=y CONFIG_SHMEM=y CONFIG_SIGNALFD=y CONFIG_SLABINFO=y CONFIG_SLAB=y CONFIG_SMP=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_SPARSEMEM=y CONFIG_SPI_MASTER=y CONFIG_SPI=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SSB_POSSIBLE=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_STANDALONE=y CONFIG_STOP_MACHINE=y CONFIG_SUN_PARTITION=y CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC=m CONFIG_SWAP=y CONFIG_SWIOTLB=y CONFIG_SYN_COOKIES=y CONFIG_SYSCTL_SYSCALL=y CONFIG_SYSCTL=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_SYSVIPC=y CONFIG_TCP_CONG_CUBIC=y CONFIG_THERMAL=y CONFIG_THRUSTMASTER_FF=y CONFIG_TICK_ONESHOT=y CONFIG_TIMERFD=y CONFIG_TMPFS=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UID16=y CONFIG_UIO=y CONFIG_UNEVICTABLE_LRU=y CONFIG_UNIX98_PTYS=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_UNIX=y CONFIG_UNUSED_SYMBOLS=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_HIDDEV=y CONFIG_USB_HID=y CONFIG_USB_MON=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE=y CONFIG_USB_SUPPORT=y CONFIG_USB_UHCI_HCD=y CONFIG_USB=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_UTS_NS=y CONFIG_VFAT_FS=m CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256 CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_DEV=m CONFIG_VIDEO_MEDIA=m CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L1=m CONFIG_VIDEO_V4L2_COMMON=m CONFIG_VIDEO_V4L2=m CONFIG_VIRT_TO_BUS=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_VT_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_VT=y CONFIG_VXFS_FS=m CONFIG_X86_64_SMP=y CONFIG_X86_64=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_CMOV=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMPXCHG=y CONFIG_X86_CPUID=y CONFIG_X86_CPU=y CONFIG_X86_DEBUGCTLMSR=y CONFIG_X86_HT=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_IO_APIC=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_LOCAL_APIC=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_MSR=y CONFIG_X86_P6_NOP=y CONFIG_X86_PAT=y CONFIG_X86_PC=y CONFIG_X86_PM_TIMER=y CONFIG_X86_RESERVE_LOW_64K=y CONFIG_X86_SMP=y CONFIG_X86_TRAMPOLINE=y CONFIG_X86_TSC=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86=y CONFIG_XFRM_USER=y CONFIG_XFRM=y CONFIG_XFS_FS=y CONFIG_XOR_BLOCKS=m CONFIG_ZISOFS=y CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_INFLATE=y CONFIG_ZONE_DMA32=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_ZONE_DMA=y -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists