[<prev] [next>] [day] [month] [year] [list]
Message-ID: <Pine.LNX.4.64.0812291120220.9555@pc-004.diku.dk>
Date: Mon, 29 Dec 2008 11:20:42 +0100 (CET)
From: Julia Lawall <julia@...u.dk>
To: dwmw2@...radead.org, linux-mtd@...ts.infradead.org, gregkh@...e.de,
linux-kernel@...r.kernel.org, kernel-janitors@...r.kernel.org
Subject: [PATCH 5/13] drivers/mtd/nand: use USB API functions rather than
constants
From: Julia Lawall <julia@...u.dk>
This set of patches introduces calls to the following set of functions:
usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)
In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:
USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC
An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)
@r5@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
- \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)
@inc@
@@
#include <linux/usb.h>
@depends on !inc && (r1||r5)@
@@
+ #include <linux/usb.h>
#include <linux/usb/...>
// </smpl>
Signed-off-by: Julia Lawall <julia@...u.dk>
---
drivers/mtd/nand/alauda.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c
index 9623803..6d96491 100644
--- a/drivers/mtd/nand/alauda.c
+++ b/drivers/mtd/nand/alauda.c
@@ -676,11 +676,11 @@ static int alauda_probe(struct usb_interface *interface,
goto error;
al->write_out = usb_sndbulkpipe(al->dev,
- ep_wr->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+ usb_endpoint_num(ep_wr));
al->bulk_in = usb_rcvbulkpipe(al->dev,
- ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+ usb_endpoint_num(ep_in));
al->bulk_out = usb_sndbulkpipe(al->dev,
- ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+ usb_endpoint_num(ep_out));
/* second device is identical up to now */
memcpy(al+1, al, sizeof(*al));
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists