linux-kernel - Re: Enable CONFIG_USB_SUSPEND by default or some mobile HD can't be unplugged safely

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20090102095643.GB17103@x61>
Date:	Fri, 2 Jan 2009 10:56:43 +0100
From:	Tino Keitel <tino.keitel@....de>
To:	linux-kernel@...r.kernel.org
Cc:	gregkh@...e.de, linux-usb@...r.kernel.org
Subject: Re: Enable CONFIG_USB_SUSPEND by default or some mobile HD can't
	be unplugged safely

On Fri, Jan 02, 2009 at 00:03:43 +0800, Yan Li wrote:
> Hello List,
> 
> By default CONFIG_USB_SUSPEND is not enabled and today I got bite by
> this when I got a new WDC My Book hard drive. I have no way to unplug
> it safely, according to it's manual, with a kernel that doesn't have
> CONFIG_USB_SUSPEND=y.
> 
> On it's manual read "you should unplug and remove the device only when
> the light is off." On Linux unmounting it won't turn it's light off
> and I can feel it's motor is still running.  The only way to unplug it
> properly on a Linux system, as to my knowledge, is to echo `suspend'
> to `/sys/bus/usb/devices/$DEV/power/level'. And one has to have
> CONFIG_USB_SUSPEND=y to do this.

With a WD My Passport drive (2,5"), I need to use sg_start --stop --pc=3
to stop the disk before unplugging it. Maybe this works with your
drive, too.  This is also required by some Firewire hard disks.  Maybe
the eject command should be extended to use this method, as it is used
also by HAL to eject hotplug devices.

Regards,
Tino
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/