| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200901052005.12428.arvidjaar@mail.ru> Date: Mon, 5 Jan 2009 20:05:09 +0300 From: Andrey Borzenkov <arvidjaar@...l.ru> To: orinoco-devel@...ts.sourceforge.net, linux-wireless@...r.kernel.org, linux-kernel@...r.kernel.org Subject: 2.6.28: warn_slowpath in orinoco receive path I would appreciate explanation which condition triggers this warn_slowpath. Otherwise does it ring the bell for someone? Network was dead after it till I reloaded modules (orinoco and hermes). dmesg and config follow. [ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 [ 0.000000] Linux version 2.6.28-1avb (bor@...ker) (gcc version 4.3.2 (GCC) ) #26 Thu Dec 25 20:23:38 MSK 2008 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] PAT WC disabled due to known CPU erratum. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) [ 0.000000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ef60000 (usable) [ 0.000000] BIOS-e820: 000000001ef60000 - 000000001ef70000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ef70000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x1ef60 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 1ef60000 @ 7000-d000 [ 0.000000] RAMDISK: 1ebd2000 - 1ef4fa31 [ 0.000000] ACPI: RSDP 000F0090, 0014 (r0 TOSHIB) [ 0.000000] ACPI: RSDT 1EF60000, 0028 (r1 TOSHIB 750 970814 TASM 4010000) [ 0.000000] ACPI: FACP 1EF60054, 0084 (r2 TOSHIB 750 970814 TASM 4010000) [ 0.000000] ACPI: DSDT 1EF600D8, 68DA (r1 TOSHIB 4000 20020417 MSFT 100000A) [ 0.000000] ACPI: FACS 000EEE00, 0040 [ 0.000000] 495MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1ef60000 [ 0.000000] low ram: 00000000 - 1ef60000 [ 0.000000] bootmap 00001000 - 00004dec [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001ef60000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000100000 - 0000944b54] TEXT DATA BSS ==> [0000100000 - 0000944b54] [ 0.000000] #2 [001ebd2000 - 001ef4fa31] RAMDISK ==> [001ebd2000 - 001ef4fa31] [ 0.000000] #3 [0000945000 - 0000949000] INIT_PG_TABLE ==> [0000945000 - 0000949000] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #6 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001ef60 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ef60 [ 0.000000] On node 0 totalpages: 126719 [ 0.000000] free_area_init_node: node 0, pgdat c03defe0, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 959 pages used for memmap [ 0.000000] Normal zone: 121761 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0xee08 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000 [ 0.000000] PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000 [ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125728 [ 0.000000] Kernel command line: BOOT_IMAGE=2.6.28-1avb root=LABEL=/ resume=LABEL=swap acpi_backlight=vendor netconsole=@...0.0.1/eth0,@10.0.0.2/00:17:42:21:27:e4 vga=791 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] CPU 0 irqstacks, hard=c0428000 soft=c0427000 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 747.740 MHz processor. [ 0.003333] Console: colour dummy device 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003333] ... MAX_LOCK_DEPTH: 48 [ 0.003333] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003333] ... CLASSHASH_SIZE: 4096 [ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.003333] ... CHAINHASH_SIZE: 8192 [ 0.003333] memory used by lock dependency info: 2463 kB [ 0.003333] per task-struct memory footprint: 1920 bytes [ 0.003333] ------------------------ [ 0.003333] | Locking API testsuite: [ 0.003333] ---------------------------------------------------------------------------- [ 0.003333] | spin |wlock |rlock | mutex | wsem | rsem | [ 0.003333] -------------------------------------------------------------------------- [ 0.003333] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] double unlock: ok | ok | ok | ok | ok | ok | [ 0.003333] initialize held: ok | ok | ok | ok | ok | ok | [ 0.003333] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.003333] -------------------------------------------------------------------------- [ 0.003333] recursive read-lock: | ok | | ok | [ 0.003333] recursive read-lock #2: | ok | | ok | [ 0.003333] mixed read-write-lock: | ok | | ok | [ 0.003333] mixed write-read-lock: | ok | | ok | [ 0.003333] -------------------------------------------------------------------------- [ 0.003333] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.003333] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.003333] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.003333] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.003333] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.003333] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.003333] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.003333] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.003333] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.003333] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/123: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/123: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/132: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/132: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/213: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/213: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/231: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/231: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/312: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/312: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/321: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/321: ok | ok | ok | [ 0.003333] hard-irq read-recursion/123: ok | [ 0.003333] soft-irq read-recursion/123: ok | [ 0.003333] hard-irq read-recursion/132: ok | [ 0.003333] soft-irq read-recursion/132: ok | [ 0.003333] hard-irq read-recursion/213: ok | [ 0.003333] soft-irq read-recursion/213: ok | [ 0.003333] hard-irq read-recursion/231: ok | [ 0.003333] soft-irq read-recursion/231: ok | [ 0.003333] hard-irq read-recursion/312: ok | [ 0.003333] soft-irq read-recursion/312: ok | [ 0.003333] hard-irq read-recursion/321: ok | [ 0.003333] soft-irq read-recursion/321: ok | [ 0.003333] ------------------------------------------------------- [ 0.003333] Good, all 218 testcases passed! | [ 0.003333] --------------------------------- [ 0.003333] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.003333] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.003333] Memory: 490172k/507264k available (2041k kernel code, 16472k reserved, 938k data, 232k init, 0k highmem) [ 0.003333] virtual kernel memory layout: [ 0.003333] fixmap : 0xfffed000 - 0xfffff000 ( 72 kB) [ 0.003333] vmalloc : 0xdf760000 - 0xfffeb000 ( 520 MB) [ 0.003333] lowmem : 0xc0000000 - 0xdef60000 ( 495 MB) [ 0.003333] .init : 0xc03ea000 - 0xc0424000 ( 232 kB) [ 0.003333] .data : 0xc02fe5d9 - 0xc03e8f1c ( 938 kB) [ 0.003333] .text : 0xc0100000 - 0xc02fe5d9 (2041 kB) [ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.003333] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.003406] Calibrating delay loop (skipped), value calculated using timer frequency.. 1496.79 BogoMIPS (lpj=2492466) [ 0.003557] Mount-cache hash table entries: 512 [ 0.005679] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.005718] CPU: L2 cache: 256K [ 0.005736] CPU serial number disabled. [ 0.005782] CPU: Intel Pentium III (Coppermine) stepping 0a [ 0.005825] Checking 'hlt' instruction... OK. [ 0.017691] Freeing SMP alternatives: 0k freed [ 0.017711] ACPI: Core revision 20080926 [ 0.046162] ACPI: setting ELCR to 0200 (from 0a00) [ 0.049512] Testing tracer nop: PASSED [ 0.053446] net_namespace: 392 bytes [ 0.054906] NET: Registered protocol family 16 [ 0.058449] ACPI: bus type pci registered [ 0.060549] PCI: PCI BIOS revision 2.10 entry at 0xfe5ae, last bus=5 [ 0.060599] PCI: Using configuration type 1 for base access [ 0.079809] ACPI: EC: Look up EC in DSDT [ 0.107886] ACPI: Interpreter enabled [ 0.107949] ACPI: (supports S0 S3 S4 S5) [ 0.108158] ACPI: Using PIC for interrupt routing [ 0.163771] ACPI: ACPI Dock Station Driver: 2 docks/bays found [ 0.163934] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.164961] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.165292] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7eff000-0xf7efffff] [ 0.165405] pci 0000:00:02.0: PME# supported from D3hot D3cold [ 0.165447] pci 0000:00:02.0: PME# disabled [ 0.165613] pci 0000:00:04.0: reg 20 io port: [0xeff0-0xefff] [ 0.165771] pci 0000:00:06.0: reg 10 io port: [0xed00-0xedff] [ 0.165794] pci 0000:00:06.0: reg 14 32bit mmio: [0xf7efe000-0xf7efefff] [ 0.165892] pci 0000:00:06.0: supports D1 D2 [ 0.165900] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold [ 0.165928] pci 0000:00:06.0: PME# disabled [ 0.166329] pci 0000:00:08.0: quirk: region ee00-ee3f claimed by ali7101 ACPI [ 0.166359] pci 0000:00:08.0: quirk: region ef00-ef1f claimed by ali7101 SMB [ 0.166473] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7efd000-0xf7efdfff] [ 0.166497] pci 0000:00:0a.0: reg 14 io port: [0xeb40-0xeb7f] [ 0.166520] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf7d00000-0xf7dfffff] [ 0.166805] pci 0000:00:0a.0: supports D1 D2 [ 0.166814] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166844] pci 0000:00:0a.0: PME# disabled [ 0.166974] pci 0000:00:10.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.167006] pci 0000:00:10.0: supports D1 D2 [ 0.167014] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167043] pci 0000:00:10.0: PME# disabled [ 0.167157] pci 0000:00:11.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.167288] pci 0000:00:11.1: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.167438] pci 0000:00:12.0: reg 10 32bit mmio: [0xf7cffe00-0xf7cfffff] [ 0.167553] pci 0000:00:12.0: supports D1 D2 [ 0.167561] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167590] pci 0000:00:12.0: PME# disabled [ 0.167780] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfdffffff] [ 0.167803] pci 0000:01:00.0: reg 14 32bit mmio: [0xfbc00000-0xfbffffff] [ 0.167825] pci 0000:01:00.0: reg 18 32bit mmio: [0xf8000000-0xf9ffffff] [ 0.167847] pci 0000:01:00.0: reg 1c 32bit mmio: [0xf7ff8000-0xf7ffffff] [ 0.167892] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.167926] pci 0000:01:00.0: supports D1 D2 [ 0.168059] pci 0000:00:01.0: bridge 32bit mmio: [0xf7f00000-0xfdffffff] [ 0.168262] bus 00 -> node 0 [ 0.168313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.169012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.204220] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11) [ 0.205154] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11) [ 0.206025] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11) [ 0.206967] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11) [ 0.207832] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11) [ 0.208703] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11) [ 0.210233] ACPI: Power Resource [PFAN] (off) [ 0.212958] PCI: Using ACPI for IRQ routing [ 0.214505] pnp: PnP ACPI init [ 0.214505] ACPI: bus type pnp registered [ 0.240351] pnp: PnP ACPI: found 12 devices [ 0.240405] ACPI: ACPI bus type pnp unregistered [ 0.240506] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.240536] system 00:00: iomem range 0xe0000-0xeffff could not be reserved [ 0.240564] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.240592] system 00:00: iomem range 0x100000-0x1ef5ffff could not be reserved [ 0.240622] system 00:00: iomem range 0x1ef60000-0x1ef6ffff could not be reserved [ 0.240652] system 00:00: iomem range 0x1f000000-0x1fffffff has been reserved [ 0.240679] system 00:00: iomem range 0x1ef70000-0x1effffff has been reserved [ 0.240709] system 00:00: iomem range 0xffe00000-0xffffffff could not be reserved [ 0.240800] system 00:08: ioport range 0x370-0x371 has been reserved [ 0.240827] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.240852] system 00:08: ioport range 0x480-0x48f has been reserved [ 0.240877] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.240903] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.240928] system 00:08: ioport range 0x6c0-0x6ff has been reserved [ 0.240953] system 00:08: ioport range 0xe000-0xe07f has been reserved [ 0.240979] system 00:08: ioport range 0xe080-0xe0ff has been reserved [ 0.241005] system 00:08: ioport range 0xe400-0xe47f has been reserved [ 0.241031] system 00:08: ioport range 0xe480-0xe4ff has been reserved [ 0.241057] system 00:08: ioport range 0xe800-0xe87f has been reserved [ 0.241083] system 00:08: ioport range 0xe880-0xe8ff has been reserved [ 0.241109] system 00:08: ioport range 0xec00-0xec7f has been reserved [ 0.241136] system 00:08: ioport range 0xec80-0xecff has been reserved [ 0.241163] system 00:08: ioport range 0xee00-0xee41 could not be reserved [ 0.241190] system 00:08: ioport range 0xee90-0xee9f has been reserved [ 0.241216] system 00:08: ioport range 0xeeac-0xeeac has been reserved [ 0.241244] system 00:08: ioport range 0xef00-0xef3f could not be reserved [ 0.241270] system 00:08: ioport range 0xef40-0xef5f has been reserved [ 0.281500] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.281554] pci 0000:00:01.0: IO window: disabled [ 0.281586] pci 0000:00:01.0: MEM window: 0xf7f00000-0xfdffffff [ 0.281616] pci 0000:00:01.0: PREFETCH window: 0x00000048000000-0x000000480fffff [ 0.281661] pci 0000:00:10.0: CardBus bridge, secondary bus 0000:02 [ 0.281683] pci 0000:00:10.0: IO window: 0x001000-0x0010ff [ 0.281711] pci 0000:00:10.0: IO window: 0x001400-0x0014ff [ 0.281738] pci 0000:00:10.0: PREFETCH window: 0x30000000-0x33ffffff [ 0.281768] pci 0000:00:10.0: MEM window: 0x34000000-0x37ffffff [ 0.281797] pci 0000:00:11.0: CardBus bridge, secondary bus 0000:06 [ 0.281818] pci 0000:00:11.0: IO window: 0x001800-0x0018ff [ 0.281845] pci 0000:00:11.0: IO window: 0x001c00-0x001cff [ 0.281873] pci 0000:00:11.0: PREFETCH window: 0x38000000-0x3bffffff [ 0.281903] pci 0000:00:11.0: MEM window: 0x3c000000-0x3fffffff [ 0.281932] pci 0000:00:11.1: CardBus bridge, secondary bus 0000:0a [ 0.281953] pci 0000:00:11.1: IO window: 0x002000-0x0020ff [ 0.281980] pci 0000:00:11.1: IO window: 0x002400-0x0024ff [ 0.282008] pci 0000:00:11.1: PREFETCH window: 0x40000000-0x43ffffff [ 0.282037] pci 0000:00:11.1: MEM window: 0x44000000-0x47ffffff [ 0.282102] pci 0000:00:01.0: setting latency timer to 64 [ 0.282135] pci 0000:00:10.0: enabling device (0000 -> 0003) [ 0.283989] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.284023] PCI: setting IRQ 11 as level-triggered [ 0.284038] pci 0000:00:10.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.284099] pci 0000:00:11.0: enabling device (0000 -> 0003) [ 0.285500] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.285526] pci 0000:00:11.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.285585] pci 0000:00:11.1: enabling device (0000 -> 0003) [ 0.287021] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.287048] pci 0000:00:11.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.287094] bus: 00 index 0 io port: [0x00-0xffff] [ 0.287113] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.287132] bus: 01 index 0 mmio: [0x0-0x0] [ 0.287149] bus: 01 index 1 mmio: [0xf7f00000-0xfdffffff] [ 0.287168] bus: 01 index 2 mmio: [0x48000000-0x480fffff] [ 0.287186] bus: 01 index 3 mmio: [0x0-0x0] [ 0.287205] bus: 02 index 0 io port: [0x1000-0x10ff] [ 0.287223] bus: 02 index 1 io port: [0x1400-0x14ff] [ 0.287241] bus: 02 index 2 mmio: [0x30000000-0x33ffffff] [ 0.287260] bus: 02 index 3 mmio: [0x34000000-0x37ffffff] [ 0.287280] bus: 06 index 0 io port: [0x1800-0x18ff] [ 0.287298] bus: 06 index 1 io port: [0x1c00-0x1cff] [ 0.287316] bus: 06 index 2 mmio: [0x38000000-0x3bffffff] [ 0.287335] bus: 06 index 3 mmio: [0x3c000000-0x3fffffff] [ 0.287354] bus: 0a index 0 io port: [0x2000-0x20ff] [ 0.287372] bus: 0a index 1 io port: [0x2400-0x24ff] [ 0.287390] bus: 0a index 2 mmio: [0x40000000-0x43ffffff] [ 0.287409] bus: 0a index 3 mmio: [0x44000000-0x47ffffff] [ 0.287493] NET: Registered protocol family 2 [ 0.288476] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.289493] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.290381] TCP bind hash table entries: 16384 (order: 7, 589824 bytes) [ 0.296294] TCP: Hash tables configured (established 16384 bind 16384) [ 0.296578] TCP reno registered [ 0.297382] NET: Registered protocol family 1 [ 0.298791] checking if image is initramfs... it is [ 0.783494] Switched to high resolution mode on CPU 0 [ 1.207685] Freeing initrd memory: 3574k freed [ 1.215621] Initializing RT-Tester: OK [ 1.217136] audit: initializing netlink socket (disabled) [ 1.217363] type=2000 audit(1230972547.216:1): initialized [ 1.232745] Kprobe smoke test started [ 1.237108] Kprobe smoke test passed successfully [ 1.237220] Testing tracer sched_switch: PASSED [ 1.371020] msgmni has been set to 964 [ 1.372429] io scheduler noop registered [ 1.372466] io scheduler anticipatory registered [ 1.372485] io scheduler deadline registered [ 1.372602] io scheduler cfq registered (default) [ 1.372877] pci 0000:00:07.0: Activating ISA DMA hang workarounds [ 1.372956] pci 0000:00:0a.0: Firmware left e100 interrupts enabled; disabling [ 1.373052] pci 0000:01:00.0: Boot video device [ 1.375768] vesafb: framebuffer at 0xfc000000, mapped to 0xdf780000, using 3072k, total 16384k [ 1.375822] vesafb: mode is 1024x768x16, linelength=2048, pages=9 [ 1.375844] vesafb: protected mode interface info at c000:775e [ 1.375865] vesafb: pmi: set display start = c00c777f, set palette = c00c77e2 [ 1.375887] vesafb: scrolling: redraw [ 1.375908] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 1.443451] Console: switching to colour frame buffer device 128x48 [ 1.508980] fb0: VESA VGA frame buffer device [ 1.895728] brd: module loaded [ 1.896180] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI [ 1.897041] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.899927] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.900957] e100 0000:00:0a.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.928753] e100 0000:00:0a.0: PME# disabled [ 1.930542] e100: eth0: e100_probe: addr 0xf7efd000, irq 11, MAC addr 00:00:39:d7:14:a1 [ 1.931955] netconsole: local port 6665 [ 1.932445] netconsole: local IP 10.0.0.1 [ 1.932942] netconsole: interface eth0 [ 1.933634] netconsole: remote port 6666 [ 1.934125] netconsole: remote IP 10.0.0.2 [ 1.934636] netconsole: remote ethernet address 00:17:42:21:27:e4 [ 1.935427] netconsole: device eth0 not up yet, forcing it [ 5.966723] netconsole: timeout waiting for carrier [ 5.969264] console [netcon0] enabled [ 11.528019] Clocksource tsc unstable (delta = 4686872086 ns) [ 11.553330] netconsole: network logging started [ 11.578938] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 11.609537] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.634257] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 11.661567] mice: PS/2 mouse device common for all mice [ 11.686238] cpuidle: using governor ladder [ 11.709905] cpuidle: using governor menu [ 11.733578] TCP cubic registered [ 11.756852] Using IPI Shortcut mode [ 11.783150] registered taskstats version 1 [ 11.807504] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 11.835732] Freeing unused kernel memory: 232k freed [ 11.860389] Write protecting the kernel text: 2044k [ 11.884027] Write protecting the kernel read-only data: 768k [ 11.936955] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 12.549127] SCSI subsystem initialized [ 12.616973] Driver 'sd' needs updating - please use bus_type methods [ 12.743299] libata version 3.00 loaded. [ 12.783348] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 12.807440] scsi0 : pata_ali [ 12.831550] scsi1 : pata_ali [ 12.858044] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xeff0 irq 14 [ 12.880525] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xeff8 irq 15 [ 13.060904] ata1.00: ATA-5: IC25N020ATDA04-0, DA3OA70A, max UDMA/100 [ 13.082736] ata1.00: 39070080 sectors, multi 0: LBA [ 13.104422] ata1.00: limited to UDMA/33 due to 40-wire cable [ 13.137442] ata1.00: configured for UDMA/33 [ 13.357237] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-C2502, 1313, max UDMA/33 [ 13.378896] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled [ 13.401179] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 13.437232] ata2.00: configured for UDMA/33 [ 13.464735] scsi 0:0:0:0: Direct-Access ATA IC25N020ATDA04-0 DA3O PQ: 0 ANSI: 5 [ 13.490601] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [ 13.514667] sd 0:0:0:0: [sda] Write Protect is off [ 13.538444] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.538704] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.565175] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [ 13.589854] sd 0:0:0:0: [sda] Write Protect is off [ 13.614097] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.614306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.638954] sda: sda1 sda2 [ 13.924661] sd 0:0:0:0: [sda] Attached SCSI disk [ 13.968100] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-C2502 1313 PQ: 0 ANSI: 5 [ 14.253617] ReiserFS: sda2: found reiserfs format "3.6" with standard journal [ 14.280221] ReiserFS: sda2: using ordered data mode [ 14.321446] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 14.384649] ReiserFS: sda2: checking transaction log (sda2) [ 14.463139] ReiserFS: sda2: Using r5 hash to sort names [ 17.443514] usbcore: registered new interface driver usbfs [ 17.470805] usbcore: registered new interface driver hub [ 17.497547] usbcore: registered new device driver usb [ 24.394010] Linux agpgart interface v0.103 [ 24.405941] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 24.411786] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 [ 24.411813] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [ 24.411975] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 24.414541] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 24.414669] ohci_hcd 0000:00:02.0: irq 11, io mem 0xf7eff000 [ 24.471787] usb usb1: configuration #1 chosen from 1 choice [ 24.472616] hub 1-0:1.0: USB hub found [ 24.472902] hub 1-0:1.0: 3 ports detected [ 24.558042] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 24.570211] ACPI: Power Button (FF) [PWRF] [ 24.570957] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 24.571415] ACPI: Lid Switch [LID] [ 24.671572] ACPI: AC Adapter [ADP1] (on-line) [ 24.860194] agpgart-ali 0000:00:00.0: ALi M1644 chipset [ 24.871030] agpgart-ali 0000:00:00.0: AGP aperture is 64M @ 0xf0000000 [ 24.985970] ACPI Warning (nspredef-0858): \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer [20080926] [ 24.987817] ACPI: Battery Slot [BAT1] (battery present) [ 24.988033] ACPI: Battery Slot [BAT2] (battery absent) [ 25.134528] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 25.135654] processor ACPI_CPU:00: registered as cooling_device0 [ 25.229799] thermal LNXTHERM:01: registered as thermal_zone0 [ 25.231810] ACPI: Thermal Zone [THRM] (58 C) [ 25.335374] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19 [ 25.335391] toshiba_acpi: HCI method: \_SB_.VALD.GHCI [ 25.530744] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:14/device:15/input/input3 [ 25.541008] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no) [ 25.658782] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.659115] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 25.772344] fan PNP0C0B:00: registered as cooling_device1 [ 25.772381] ACPI: Fan [FAN] (off) [ 26.080455] pci 0000:00:08.0: enabling device (0000 -> 0001) [ 26.081621] ALi_M1535: initialized. timeout=60 sec (nowayout=0) [ 27.190319] Driver 'sr' needs updating - please use bus_type methods [ 27.272525] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 27.293123] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 27.293149] Uniform CD-ROM driver Revision: 3.20 [ 27.294913] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 27.373603] yenta_cardbus 0000:00:10.0: CardBus bridge found [12a3:ab01] [ 27.392891] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 27.501376] yenta_cardbus 0000:00:10.0: ISA IRQ mask 0x0000, PCI irq 11 [ 27.501395] yenta_cardbus 0000:00:10.0: Socket status: 30000011 [ 27.507823] yenta_cardbus 0000:00:11.0: CardBus bridge found [1179:0001] [ 27.634301] yenta_cardbus 0000:00:11.0: ISA IRQ mask 0x04b8, PCI irq 11 [ 27.634320] yenta_cardbus 0000:00:11.0: Socket status: 30000087 [ 27.651978] yenta_cardbus 0000:00:11.1: CardBus bridge found [1179:0001] [ 27.777600] yenta_cardbus 0000:00:11.1: ISA IRQ mask 0x04b8, PCI irq 11 [ 27.777619] yenta_cardbus 0000:00:11.1: Socket status: 30000007 [ 28.346808] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0 [ 29.475993] NET: Registered protocol family 23 [ 29.496559] rtc_cmos 00:07: RTC can wake from S4 [ 29.498431] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 29.498530] rtc0: alarms up to one year, 114 bytes nvram [ 29.719553] Detected unconfigured Toshiba laptop with ALi ISA bridge SMSC IrDA chip, pre-configuring device. [ 29.719592] Activated ALi 1533 ISA bridge port 0x02e8. [ 29.719609] Activated ALi 1533 ISA bridge port 0x02f8. [ 29.719856] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227 [ 29.719871] smsc_superio_flat(): IrDA not enabled [ 29.719899] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x02 [ 29.719939] SMsC IrDA Controller found [ 29.719942] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7 [ 29.720274] No transceiver found. Defaulting to Fast pin select [ 29.721398] IrDA: Registered device irda0 [ 31.286462] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 31.288154] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 31.288173] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 36.331414] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f [ 36.335268] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean. [ 36.336858] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 36.338236] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 36.340781] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 36.343285] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f [ 36.347003] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: clean. [ 36.348764] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: clean. [ 36.350237] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean. [ 36.352917] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff: clean. [ 37.131723] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f [ 37.135102] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 37.136598] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 37.138107] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 37.140717] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 37.143049] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 37.211218] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 37.952307] Marking TSC unstable due to TSC halts in idle [ 38.195106] orinoco 0.15 (David Gibson <hermes@...son.dropbear.id.au>, Pavel Roskin <proski@....org>, et al) [ 38.251851] orinoco_cs 0.15 (David Gibson <hermes@...son.dropbear.id.au>, Pavel Roskin <proski@....org>, et al) [ 38.333966] eth1: Hardware identity 0005:0002:0001:0002 [ 38.334086] eth1: Station identity 001f:0001:0006:000e [ 38.334098] eth1: Firmware determined as Lucent/Agere 6.14 [ 38.334113] eth1: Attempting to download firmware agere_sta_fw.bin [ 38.334143] hermes_dld: AUX enable returned 0 [ 38.335147] hermes_dld: AUX disable returned 0 [ 38.335155] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 38.335163] eth1: Read PDA returned 0 [ 38.335177] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 38.457470] hermes_dld: AUX enable returned 0 [ 38.457486] hermes_dld: Enabling volatile, EP 0x000f8000 [ 38.458578] hermes_dld: PROGRAM_ENABLE returned 0 [ 38.458586] eth1: Program init returned 0 [ 38.458596] hermes_dld: Programming block of length 60416 to address 0x001f0000 [ 38.507704] hermes_dld: Programming block of length 4096 to address 0x001ef000 [ 38.511267] eth1: Program returned 0 [ 38.511278] hermes_dld: Found record 0x0003 at dd807c1c [ 38.511300] hermes_dld: Found record 0x0005 at dd807ca8 [ 38.511320] hermes_dld: Found record 0x0008 at dd807cd2 [ 38.511336] hermes_dld: Found record 0x0007 at dd807cc4 [ 38.511354] hermes_dld: Found record 0x0006 at dd807cb6 [ 38.511374] hermes_dld: Found record 0x0110 at dd807d9a [ 38.511408] hermes_dld: Found record 0x0120 at dd807dba [ 38.511440] hermes_dld: Found record 0x0130 at dd807dda [ 38.511473] hermes_dld: Found record 0x0140 at dd807dfa [ 38.511486] hermes_dld: Found record 0x0150 at dd807e02 [ 38.511499] hermes_dld: Using default record 0x0160 at dfa9fb60 [ 38.511532] hermes_dld: Found record 0x0101 at dd807d46 [ 38.511547] hermes_dld: Found record 0x0103 at dd807d5c [ 38.511567] hermes_dld: Found record 0x0104 at dd807d6c [ 38.511579] hermes_dld: Found record 0x0105 at dd807d72 [ 38.511591] hermes_dld: Found record 0x0105 at dd807d72 [ 38.511603] hermes_dld: Found record 0x0105 at dd807d72 [ 38.511615] hermes_dld: Found record 0x0107 at dd807d7e [ 38.511627] hermes_dld: Found record 0x0109 at dd807d8c [ 38.511645] hermes_dld: Using default record 0x0161 at dfa9fb80 [ 38.511850] eth1: Apply PDA returned 0 [ 38.511914] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [ 38.511942] hermes_dld: AUX disable returned 0 [ 38.522588] eth1: Program end returned 0 [ 38.522598] eth1: hermes_present returned 1 [ 38.523547] eth1: Hardware identity 0005:0002:0001:0002 [ 38.523672] eth1: Station identity 001f:0002:0009:0030 [ 38.523683] eth1: Firmware determined as Lucent/Agere 9.48 [ 38.523692] eth1: Ad-hoc demo mode supported [ 38.523699] eth1: IEEE standard IBSS ad-hoc mode supported [ 38.523707] eth1: WEP supported, 104-bit key [ 38.523715] eth1: WPA-PSK supported [ 38.999361] eth1: MAC address 00:02:2d:26:95:6c [ 38.999477] eth1: Station name "HERMES I" [ 39.000304] eth1: ready [ 39.001172] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f [ 39.395039] Toshiba System Management Mode driver v1.11 26/9/2001 [ 39.483467] Non-volatile memory driver v1.2 [ 41.087684] device-mapper: uevent: version 1.0.3 [ 41.089609] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@...hat.com [ 41.398277] device-mapper: multipath: version 1.0.5 loaded [ 41.827636] device-mapper: multipath round-robin: version 1.0.0 loaded [ 41.828841] device-mapper: table: 254:0: multipath: error getting device [ 41.828861] device-mapper: ioctl: error adding target to table [ 47.232045] loop: module loaded [ 50.511159] Adding 500432k swap on /dev/sda1. Priority:-1 extents:1 across:500432k [ 54.189125] IrCOMM protocol (Dag Brattli) [ 56.119655] PPP generic driver version 2.4.2 [ 63.343791] NET: Registered protocol family 17 [ 63.743478] eth1: Lucent/Agere firmware doesn't support manual roaming [ 63.891013] eth1: New link status: Connected (0001) [ 1124.531915] PM: Syncing filesystems ... done. [ 1124.584822] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 1124.596410] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 1124.597320] Suspending console(s) (use no_console_suspend to debug) [ 1124.608047] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1125.186209] sd 0:0:0:0: [sda] Stopping disk [ 1125.860441] e100 0000:00:0a.0: PCI INT A disabled [ 1125.917055] ALI 5451 0000:00:06.0: PCI INT A disabled [ 1125.930491] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [ 1126.714456] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 1126.726970] ohci_hcd 0000:00:02.0: PCI INT A disabled [ 1126.743622] ACPI: Preparing to enter system sleep state S3 [ 1126.743622] Back to C! [ 1126.755217] ACPI: Waking up from system sleep state S3 [ 1126.775583] pci 0000:00:01.0: setting latency timer to 64 [ 1126.786710] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [ 1126.786752] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [ 1126.842015] usb usb1: root hub lost power or was reset [ 1126.853399] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [ 1126.853450] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 1126.861881] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 1126.861918] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [ 1126.862154] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 1126.862192] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 1127.133613] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [ 1127.146687] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [ 1127.146750] e100 0000:00:0a.0: restoring config space at offset 0x1 (was 0x2900003, writing 0x2900007) [ 1127.173771] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [ 1127.267146] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [ 1127.267157] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [ 1127.268040] ata2.00: configured for UDMA/33 [ 1128.156705] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 1128.156823] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 1128.162021] sd 0:0:0:0: [sda] Starting disk [ 1128.460404] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [ 1128.460415] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [ 1128.474048] ata1.00: configured for UDMA/33 [ 1128.500031] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [ 1128.500206] sd 0:0:0:0: [sda] Write Protect is off [ 1128.500214] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1128.500406] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1128.753857] eth1: Attempting to download firmware agere_sta_fw.bin [ 1128.753890] hermes_dld: AUX enable returned 0 [ 1128.754922] hermes_dld: AUX disable returned 0 [ 1128.754929] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 1128.754935] eth1: Read PDA returned 0 [ 1128.837110] hermes_dld: AUX enable returned 0 [ 1128.837117] hermes_dld: Enabling volatile, EP 0x000f8000 [ 1128.838218] hermes_dld: PROGRAM_ENABLE returned 0 [ 1128.838224] eth1: Program init returned 0 [ 1128.838232] hermes_dld: Programming block of length 60416 to address 0x001f0000 [ 1128.886427] hermes_dld: Programming block of length 4096 to address 0x001ef000 [ 1128.889710] eth1: Program returned 0 [ 1128.889719] hermes_dld: Found record 0x0003 at d99f201c [ 1128.889739] hermes_dld: Found record 0x0005 at d99f20a8 [ 1128.889757] hermes_dld: Found record 0x0008 at d99f20d2 [ 1128.889772] hermes_dld: Found record 0x0007 at d99f20c4 [ 1128.889788] hermes_dld: Found record 0x0006 at d99f20b6 [ 1128.889805] hermes_dld: Found record 0x0110 at d99f219a [ 1128.889837] hermes_dld: Found record 0x0120 at d99f21ba [ 1128.889868] hermes_dld: Found record 0x0130 at d99f21da [ 1128.889945] hermes_dld: Found record 0x0140 at d99f21fa [ 1128.889958] hermes_dld: Found record 0x0150 at d99f2202 [ 1128.889970] hermes_dld: Using default record 0x0160 at dfa9fb60 [ 1128.890001] hermes_dld: Found record 0x0101 at d99f2146 [ 1128.890015] hermes_dld: Found record 0x0103 at d99f215c [ 1128.890033] hermes_dld: Found record 0x0104 at d99f216c [ 1128.890044] hermes_dld: Found record 0x0105 at d99f2172 [ 1128.890055] hermes_dld: Found record 0x0105 at d99f2172 [ 1128.890065] hermes_dld: Found record 0x0105 at d99f2172 [ 1128.890076] hermes_dld: Found record 0x0107 at d99f217e [ 1128.890087] hermes_dld: Found record 0x0109 at d99f218c [ 1128.890104] hermes_dld: Using default record 0x0161 at dfa9fb80 [ 1128.890318] eth1: Apply PDA returned 0 [ 1128.890381] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [ 1128.890408] hermes_dld: AUX disable returned 0 [ 1128.901046] eth1: Program end returned 0 [ 1128.901054] eth1: hermes_present returned 1 [ 1128.913457] Restarting tasks ... done. [ 1129.179103] eth1: New link status: Connected (0001) [ 1410.335391] zsh[6088]: segfault at 3353316 ip b7d044b2 sp bfbb9020 error 4 in complist.so[b7cff000+d000] [ 2584.718922] zsh[7111]: segfault at 3000158 ip b7ceb4b2 sp bfea0b10 error 4 in complist.so[b7ce6000+d000] [ 2818.120380] PM: Syncing filesystems ... done. [ 2818.138487] Freezing user space processes ... (elapsed 0.54 seconds) done. [ 2818.678805] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 2818.679633] Suspending console(s) (use no_console_suspend to debug) [ 2818.687643] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2818.689986] sd 0:0:0:0: [sda] Stopping disk [ 2819.406805] ALI 5451 0000:00:06.0: PCI INT A disabled [ 2819.420237] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [ 2820.194260] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 2820.206647] ohci_hcd 0000:00:02.0: PCI INT A disabled [ 2820.222739] ACPI: Preparing to enter system sleep state S3 [ 2820.223138] Back to C! [ 2820.234368] ACPI: Waking up from system sleep state S3 [ 2820.253540] pci 0000:00:01.0: setting latency timer to 64 [ 2820.266538] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [ 2820.266579] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [ 2820.321845] usb usb1: root hub lost power or was reset [ 2820.333229] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [ 2820.333280] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 2820.339592] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 2820.339627] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [ 2820.339925] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 2820.339962] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 2820.609976] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [ 2820.623183] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [ 2820.650560] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [ 2820.650574] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [ 2820.651451] ata2.00: configured for UDMA/33 [ 2820.652178] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [ 2821.633199] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 2821.633316] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 2821.638417] sd 0:0:0:0: [sda] Starting disk [ 2822.273575] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [ 2822.273586] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [ 2822.287200] ata1.00: configured for UDMA/33 [ 2822.314324] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [ 2822.314450] sd 0:0:0:0: [sda] Write Protect is off [ 2822.314458] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2822.314649] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2822.566743] eth1: Attempting to download firmware agere_sta_fw.bin [ 2822.566774] hermes_dld: AUX enable returned 0 [ 2822.567806] hermes_dld: AUX disable returned 0 [ 2822.567813] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 2822.567819] eth1: Read PDA returned 0 [ 2822.649994] hermes_dld: AUX enable returned 0 [ 2822.650001] hermes_dld: Enabling volatile, EP 0x000f8000 [ 2822.651102] hermes_dld: PROGRAM_ENABLE returned 0 [ 2822.651107] eth1: Program init returned 0 [ 2822.651116] hermes_dld: Programming block of length 60416 to address 0x001f0000 [ 2822.699311] hermes_dld: Programming block of length 4096 to address 0x001ef000 [ 2822.702594] eth1: Program returned 0 [ 2822.702602] hermes_dld: Found record 0x0003 at cbee881c [ 2822.702623] hermes_dld: Found record 0x0005 at cbee88a8 [ 2822.702640] hermes_dld: Found record 0x0008 at cbee88d2 [ 2822.702656] hermes_dld: Found record 0x0007 at cbee88c4 [ 2822.702672] hermes_dld: Found record 0x0006 at cbee88b6 [ 2822.702690] hermes_dld: Found record 0x0110 at cbee899a [ 2822.702721] hermes_dld: Found record 0x0120 at cbee89ba [ 2822.702752] hermes_dld: Found record 0x0130 at cbee89da [ 2822.702783] hermes_dld: Found record 0x0140 at cbee89fa [ 2822.702796] hermes_dld: Found record 0x0150 at cbee8a02 [ 2822.702807] hermes_dld: Using default record 0x0160 at dfa9fb60 [ 2822.702838] hermes_dld: Found record 0x0101 at cbee8946 [ 2822.702852] hermes_dld: Found record 0x0103 at cbee895c [ 2822.702871] hermes_dld: Found record 0x0104 at cbee896c [ 2822.702881] hermes_dld: Found record 0x0105 at cbee8972 [ 2822.702892] hermes_dld: Found record 0x0105 at cbee8972 [ 2822.702903] hermes_dld: Found record 0x0105 at cbee8972 [ 2822.702913] hermes_dld: Found record 0x0107 at cbee897e [ 2822.702924] hermes_dld: Found record 0x0109 at cbee898c [ 2822.702941] hermes_dld: Using default record 0x0161 at dfa9fb80 [ 2822.703202] eth1: Apply PDA returned 0 [ 2822.703265] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [ 2822.703292] hermes_dld: AUX disable returned 0 [ 2822.713933] eth1: Program end returned 0 [ 2822.713941] eth1: hermes_present returned 1 [ 2822.726171] Restarting tasks ... done. [ 2822.952127] eth1: New link status: Connected (0001) [ 3922.281122] PM: Syncing filesystems ... done. [ 3922.288532] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 3922.296478] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 3922.297296] Suspending console(s) (use no_console_suspend to debug) [ 3922.305315] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3922.789836] sd 0:0:0:0: [sda] Stopping disk [ 3923.523361] ALI 5451 0000:00:06.0: PCI INT A disabled [ 3923.536805] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [ 3924.297421] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 3924.309857] ohci_hcd 0000:00:02.0: PCI INT A disabled [ 3924.325918] ACPI: Preparing to enter system sleep state S3 [ 3924.326360] Back to C! [ 3924.338587] ACPI: Waking up from system sleep state S3 [ 3924.358998] pci 0000:00:01.0: setting latency timer to 64 [ 3924.369751] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [ 3924.369793] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [ 3924.425055] usb usb1: root hub lost power or was reset [ 3924.436439] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [ 3924.436489] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 3924.443316] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 3924.443351] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [ 3924.443414] ALI 5451 0000:00:06.0: restoring config space at offset 0x1 (was 0x2900003, writing 0xc2900003) [ 3924.443786] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 3924.443821] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 3924.723197] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [ 3924.736391] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [ 3924.763349] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [ 3925.020839] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [ 3925.020849] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [ 3925.022172] ata2.00: configured for UDMA/33 [ 3925.746447] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 3925.746565] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 3925.751712] sd 0:0:0:0: [sda] Starting disk [ 3926.696792] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [ 3926.696803] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [ 3926.710420] ata1.00: configured for UDMA/33 [ 3926.724736] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [ 3926.724863] sd 0:0:0:0: [sda] Write Protect is off [ 3926.724872] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3926.725062] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3926.976608] eth1: Attempting to download firmware agere_sta_fw.bin [ 3926.976641] hermes_dld: AUX enable returned 0 [ 3926.977672] hermes_dld: AUX disable returned 0 [ 3926.977679] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 3926.977685] eth1: Read PDA returned 0 [ 3927.059862] hermes_dld: AUX enable returned 0 [ 3927.059869] hermes_dld: Enabling volatile, EP 0x000f8000 [ 3927.060970] hermes_dld: PROGRAM_ENABLE returned 0 [ 3927.060976] eth1: Program init returned 0 [ 3927.060984] hermes_dld: Programming block of length 60416 to address 0x001f0000 [ 3927.109129] hermes_dld: Programming block of length 4096 to address 0x001ef000 [ 3927.112404] eth1: Program returned 0 [ 3927.112413] hermes_dld: Found record 0x0003 at ca3be01c [ 3927.112433] hermes_dld: Found record 0x0005 at ca3be0a8 [ 3927.112450] hermes_dld: Found record 0x0008 at ca3be0d2 [ 3927.112465] hermes_dld: Found record 0x0007 at ca3be0c4 [ 3927.112482] hermes_dld: Found record 0x0006 at ca3be0b6 [ 3927.112500] hermes_dld: Found record 0x0110 at ca3be19a [ 3927.112531] hermes_dld: Found record 0x0120 at ca3be1ba [ 3927.112563] hermes_dld: Found record 0x0130 at ca3be1da [ 3927.112593] hermes_dld: Found record 0x0140 at ca3be1fa [ 3927.112606] hermes_dld: Found record 0x0150 at ca3be202 [ 3927.112617] hermes_dld: Using default record 0x0160 at dfa9fb60 [ 3927.112648] hermes_dld: Found record 0x0101 at ca3be146 [ 3927.112662] hermes_dld: Found record 0x0103 at ca3be15c [ 3927.112680] hermes_dld: Found record 0x0104 at ca3be16c [ 3927.112691] hermes_dld: Found record 0x0105 at ca3be172 [ 3927.112701] hermes_dld: Found record 0x0105 at ca3be172 [ 3927.112712] hermes_dld: Found record 0x0105 at ca3be172 [ 3927.112723] hermes_dld: Found record 0x0107 at ca3be17e [ 3927.112733] hermes_dld: Found record 0x0109 at ca3be18c [ 3927.112750] hermes_dld: Using default record 0x0161 at dfa9fb80 [ 3927.113013] eth1: Apply PDA returned 0 [ 3927.113076] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [ 3927.113103] hermes_dld: AUX disable returned 0 [ 3927.123742] eth1: Program end returned 0 [ 3927.123749] eth1: hermes_present returned 1 [ 3927.135992] Restarting tasks ... done. [ 3927.380416] eth1: New link status: Connected (0001) [14658.177775] eth1: New link status: AP Out of Range (0004) [14687.306825] PM: Syncing filesystems ... done. [14687.336326] Freezing user space processes ... (elapsed 0.00 seconds) done. [14687.345126] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [14687.346053] Suspending console(s) (use no_console_suspend to debug) [14687.353309] sd 0:0:0:0: [sda] Synchronizing SCSI cache [14687.775706] sd 0:0:0:0: [sda] Stopping disk [14688.508949] ALI 5451 0000:00:06.0: PCI INT A disabled [14688.522417] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [14689.300140] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [14689.312128] ohci_hcd 0000:00:02.0: PCI INT A disabled [14689.328226] ACPI: Preparing to enter system sleep state S3 [14689.328617] Back to C! [14689.340917] ACPI: Waking up from system sleep state S3 [14689.361710] pci 0000:00:01.0: setting latency timer to 64 [14689.371970] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [14689.372012] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [14689.427324] usb usb1: root hub lost power or was reset [14689.438709] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [14689.438759] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [14689.445597] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [14689.445632] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [14689.445695] ALI 5451 0000:00:06.0: restoring config space at offset 0x1 (was 0x2900003, writing 0xc2900003) [14689.445882] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [14689.446099] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [14689.725460] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [14689.738663] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [14689.765601] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [14690.022650] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [14690.022660] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [14690.023527] ata2.00: configured for UDMA/33 [14690.748676] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [14690.748792] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [14690.753888] sd 0:0:0:0: [sda] Starting disk [14691.682376] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [14691.682388] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [14691.696011] ata1.00: configured for UDMA/33 [14691.720021] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [14691.720147] sd 0:0:0:0: [sda] Write Protect is off [14691.720156] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [14691.720347] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [14691.972213] eth1: Attempting to download firmware agere_sta_fw.bin [14691.972245] hermes_dld: AUX enable returned 0 [14691.973276] hermes_dld: AUX disable returned 0 [14691.973283] hermes_dld: Actual PDA length 998, Max allowed 1000 [14691.973289] eth1: Read PDA returned 0 [14692.055452] hermes_dld: AUX enable returned 0 [14692.055458] hermes_dld: Enabling volatile, EP 0x000f8000 [14692.056582] hermes_dld: PROGRAM_ENABLE returned 0 [14692.056588] eth1: Program init returned 0 [14692.056596] hermes_dld: Programming block of length 60416 to address 0x001f0000 [14692.104771] hermes_dld: Programming block of length 4096 to address 0x001ef000 [14692.108047] eth1: Program returned 0 [14692.108055] hermes_dld: Found record 0x0003 at dddfa01c [14692.108074] hermes_dld: Found record 0x0005 at dddfa0a8 [14692.108092] hermes_dld: Found record 0x0008 at dddfa0d2 [14692.108107] hermes_dld: Found record 0x0007 at dddfa0c4 [14692.108124] hermes_dld: Found record 0x0006 at dddfa0b6 [14692.108141] hermes_dld: Found record 0x0110 at dddfa19a [14692.108173] hermes_dld: Found record 0x0120 at dddfa1ba [14692.108204] hermes_dld: Found record 0x0130 at dddfa1da [14692.108235] hermes_dld: Found record 0x0140 at dddfa1fa [14692.108247] hermes_dld: Found record 0x0150 at dddfa202 [14692.108258] hermes_dld: Using default record 0x0160 at dfa9fb60 [14692.108289] hermes_dld: Found record 0x0101 at dddfa146 [14692.108303] hermes_dld: Found record 0x0103 at dddfa15c [14692.108321] hermes_dld: Found record 0x0104 at dddfa16c [14692.108332] hermes_dld: Found record 0x0105 at dddfa172 [14692.108342] hermes_dld: Found record 0x0105 at dddfa172 [14692.108353] hermes_dld: Found record 0x0105 at dddfa172 [14692.108364] hermes_dld: Found record 0x0107 at dddfa17e [14692.108374] hermes_dld: Found record 0x0109 at dddfa18c [14692.108392] hermes_dld: Using default record 0x0161 at dfa9fb80 [14692.108651] eth1: Apply PDA returned 0 [14692.108715] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [14692.108742] hermes_dld: AUX disable returned 0 [14692.119378] eth1: Program end returned 0 [14692.119385] eth1: hermes_present returned 1 [14692.131360] Restarting tasks ... done. [14692.265714] eth1: New link status: Connected (0001) [17674.569165] PM: Syncing filesystems ... done. [17675.149435] Freezing user space processes ... (elapsed 0.03 seconds) done. [17675.183176] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [17675.183998] Suspending console(s) (use no_console_suspend to debug) [17675.192153] sd 0:0:0:0: [sda] Synchronizing SCSI cache [17675.222450] sd 0:0:0:0: [sda] Stopping disk [17675.951985] ALI 5451 0000:00:06.0: PCI INT A disabled [17675.965546] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [17676.718099] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [17676.728489] ohci_hcd 0000:00:02.0: PCI INT A disabled [17676.744605] ACPI: Preparing to enter system sleep state S3 [17676.744984] Back to C! [17676.757208] ACPI: Waking up from system sleep state S3 [17676.777962] pci 0000:00:01.0: setting latency timer to 64 [17676.788392] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [17676.788434] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [17676.843930] usb usb1: root hub lost power or was reset [17676.855287] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [17676.855337] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [17676.863351] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [17676.863388] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [17676.863626] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [17676.863661] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [17677.115161] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [17677.128340] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [17677.158653] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [17677.439011] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [17677.439020] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [17677.445576] ata2.00: configured for UDMA/33 [17678.141728] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [17678.141845] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [17678.146944] sd 0:0:0:0: [sda] Starting disk [17679.225417] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [17679.225428] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [17679.239043] ata1.00: configured for UDMA/33 [17679.266426] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [17679.266552] sd 0:0:0:0: [sda] Write Protect is off [17679.266561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [17679.266751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17679.518587] eth1: Attempting to download firmware agere_sta_fw.bin [17679.518618] hermes_dld: AUX enable returned 0 [17679.519646] hermes_dld: AUX disable returned 0 [17679.519653] hermes_dld: Actual PDA length 998, Max allowed 1000 [17679.519659] eth1: Read PDA returned 0 [17679.601830] hermes_dld: AUX enable returned 0 [17679.601836] hermes_dld: Enabling volatile, EP 0x000f8000 [17679.602936] hermes_dld: PROGRAM_ENABLE returned 0 [17679.602942] eth1: Program init returned 0 [17679.602951] hermes_dld: Programming block of length 60416 to address 0x001f0000 [17679.651091] hermes_dld: Programming block of length 4096 to address 0x001ef000 [17679.654374] eth1: Program returned 0 [17679.654382] hermes_dld: Found record 0x0003 at d99f2c1c [17679.654402] hermes_dld: Found record 0x0005 at d99f2ca8 [17679.654419] hermes_dld: Found record 0x0008 at d99f2cd2 [17679.654435] hermes_dld: Found record 0x0007 at d99f2cc4 [17679.654452] hermes_dld: Found record 0x0006 at d99f2cb6 [17679.654469] hermes_dld: Found record 0x0110 at d99f2d9a [17679.654501] hermes_dld: Found record 0x0120 at d99f2dba [17679.654532] hermes_dld: Found record 0x0130 at d99f2dda [17679.654563] hermes_dld: Found record 0x0140 at d99f2dfa [17679.654575] hermes_dld: Found record 0x0150 at d99f2e02 [17679.654587] hermes_dld: Using default record 0x0160 at dfa9fb60 [17679.654618] hermes_dld: Found record 0x0101 at d99f2d46 [17679.654632] hermes_dld: Found record 0x0103 at d99f2d5c [17679.654650] hermes_dld: Found record 0x0104 at d99f2d6c [17679.654661] hermes_dld: Found record 0x0105 at d99f2d72 [17679.654672] hermes_dld: Found record 0x0105 at d99f2d72 [17679.654683] hermes_dld: Found record 0x0105 at d99f2d72 [17679.654693] hermes_dld: Found record 0x0107 at d99f2d7e [17679.654704] hermes_dld: Found record 0x0109 at d99f2d8c [17679.654721] hermes_dld: Using default record 0x0161 at dfa9fb80 [17679.654981] eth1: Apply PDA returned 0 [17679.655044] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [17679.655071] hermes_dld: AUX disable returned 0 [17679.665715] eth1: Program end returned 0 [17679.665723] eth1: hermes_present returned 1 [17679.677956] Restarting tasks ... done. [17679.897126] eth1: New link status: Connected (0001) [23463.268139] tun: Universal TUN/TAP device driver, 1.6 [23463.268163] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com> [28673.063444] PM: Syncing filesystems ... done. [28673.122228] Freezing user space processes ... (elapsed 0.59 seconds) done. [28673.715381] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [28673.716179] Suspending console(s) (use no_console_suspend to debug) [28673.724183] sd 0:0:0:0: [sda] Synchronizing SCSI cache [28673.724668] sd 0:0:0:0: [sda] Stopping disk [28674.457550] ALI 5451 0000:00:06.0: PCI INT A disabled [28674.471109] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [28675.234279] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [28675.247383] ohci_hcd 0000:00:02.0: PCI INT A disabled [28675.263491] ACPI: Preparing to enter system sleep state S3 [28675.263886] Back to C! [28675.276179] ACPI: Waking up from system sleep state S3 [28675.296494] pci 0000:00:01.0: setting latency timer to 64 [28675.307291] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [28675.307333] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [28675.362591] usb usb1: root hub lost power or was reset [28675.373976] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [28675.374029] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [28675.380930] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [28675.380966] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [28675.381384] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [28675.381420] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [28675.677389] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [28675.690596] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [28675.717575] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [28675.957911] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [28675.957921] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [28675.964486] ata2.00: configured for UDMA/33 [28676.700612] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [28676.700728] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [28676.705828] sd 0:0:0:0: [sda] Starting disk [28677.687651] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [28677.687662] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [28677.701279] ata1.00: configured for UDMA/33 [28677.727306] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [28677.727431] sd 0:0:0:0: [sda] Write Protect is off [28677.727440] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [28677.727631] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [28677.980801] eth1: Attempting to download firmware agere_sta_fw.bin [28677.980834] hermes_dld: AUX enable returned 0 [28677.981864] hermes_dld: AUX disable returned 0 [28677.981871] hermes_dld: Actual PDA length 998, Max allowed 1000 [28677.981877] eth1: Read PDA returned 0 [28678.064041] hermes_dld: AUX enable returned 0 [28678.064048] hermes_dld: Enabling volatile, EP 0x000f8000 [28678.065160] hermes_dld: PROGRAM_ENABLE returned 0 [28678.065166] eth1: Program init returned 0 [28678.065175] hermes_dld: Programming block of length 60416 to address 0x001f0000 [28678.113299] hermes_dld: Programming block of length 4096 to address 0x001ef000 [28678.116577] eth1: Program returned 0 [28678.116585] hermes_dld: Found record 0x0003 at cfa9641c [28678.116605] hermes_dld: Found record 0x0005 at cfa964a8 [28678.116623] hermes_dld: Found record 0x0008 at cfa964d2 [28678.116638] hermes_dld: Found record 0x0007 at cfa964c4 [28678.116655] hermes_dld: Found record 0x0006 at cfa964b6 [28678.116672] hermes_dld: Found record 0x0110 at cfa9659a [28678.116703] hermes_dld: Found record 0x0120 at cfa965ba [28678.116735] hermes_dld: Found record 0x0130 at cfa965da [28678.116765] hermes_dld: Found record 0x0140 at cfa965fa [28678.116777] hermes_dld: Found record 0x0150 at cfa96602 [28678.116789] hermes_dld: Using default record 0x0160 at dfa9fb60 [28678.116821] hermes_dld: Found record 0x0101 at cfa96546 [28678.116834] hermes_dld: Found record 0x0103 at cfa9655c [28678.116853] hermes_dld: Found record 0x0104 at cfa9656c [28678.116863] hermes_dld: Found record 0x0105 at cfa96572 [28678.116874] hermes_dld: Found record 0x0105 at cfa96572 [28678.116885] hermes_dld: Found record 0x0105 at cfa96572 [28678.116895] hermes_dld: Found record 0x0107 at cfa9657e [28678.116906] hermes_dld: Found record 0x0109 at cfa9658c [28678.116923] hermes_dld: Using default record 0x0161 at dfa9fb80 [28678.117137] eth1: Apply PDA returned 0 [28678.117246] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [28678.117273] hermes_dld: AUX disable returned 0 [28678.127909] eth1: Program end returned 0 [28678.127917] eth1: hermes_present returned 1 [28678.140167] Restarting tasks ... done. [28678.467622] eth1: New link status: Connected (0001) [32837.809043] kwrited[31962]: segfault at 9079a1cd ip b75e5539 sp bfe2e184 error 4 in libc-2.8.so[b757a000+148000] [42226.314859] PM: Syncing filesystems ... done. [42226.970260] Freezing user space processes ... (elapsed 0.12 seconds) done. [42227.090613] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [42227.091403] Suspending console(s) (use no_console_suspend to debug) [42227.099461] sd 0:0:0:0: [sda] Synchronizing SCSI cache [42227.099955] sd 0:0:0:0: [sda] Stopping disk [42227.829531] ALI 5451 0000:00:06.0: PCI INT A disabled [42227.842974] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [42228.613957] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [42228.626038] ohci_hcd 0000:00:02.0: PCI INT A disabled [42228.642133] ACPI: Preparing to enter system sleep state S3 [42228.642530] Back to C! [42228.654825] ACPI: Waking up from system sleep state S3 [42228.675211] pci 0000:00:01.0: setting latency timer to 64 [42228.685937] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [42228.685978] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [42228.741237] usb usb1: root hub lost power or was reset [42228.752621] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [42228.752671] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [42228.759516] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [42228.759552] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [42228.759787] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [42228.759822] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [42229.042701] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [42229.055909] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [42229.082886] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [42229.336614] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [42229.336625] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [42229.343177] ata2.00: configured for UDMA/33 [42230.065955] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [42230.066071] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [42230.071166] sd 0:0:0:0: [sda] Starting disk [42231.012969] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [42231.012980] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [42231.026590] ata1.00: configured for UDMA/33 [42231.044328] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [42231.044456] sd 0:0:0:0: [sda] Write Protect is off [42231.044464] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [42231.044655] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [42231.296124] eth1: Attempting to download firmware agere_sta_fw.bin [42231.296156] hermes_dld: AUX enable returned 0 [42231.297186] hermes_dld: AUX disable returned 0 [42231.297193] hermes_dld: Actual PDA length 998, Max allowed 1000 [42231.297199] eth1: Read PDA returned 0 [42231.379375] hermes_dld: AUX enable returned 0 [42231.379382] hermes_dld: Enabling volatile, EP 0x000f8000 [42231.380482] hermes_dld: PROGRAM_ENABLE returned 0 [42231.380488] eth1: Program init returned 0 [42231.380496] hermes_dld: Programming block of length 60416 to address 0x001f0000 [42231.428642] hermes_dld: Programming block of length 4096 to address 0x001ef000 [42231.431920] eth1: Program returned 0 [42231.431928] hermes_dld: Found record 0x0003 at cbc7041c [42231.431948] hermes_dld: Found record 0x0005 at cbc704a8 [42231.431966] hermes_dld: Found record 0x0008 at cbc704d2 [42231.431981] hermes_dld: Found record 0x0007 at cbc704c4 [42231.431997] hermes_dld: Found record 0x0006 at cbc704b6 [42231.432014] hermes_dld: Found record 0x0110 at cbc7059a [42231.432046] hermes_dld: Found record 0x0120 at cbc705ba [42231.432077] hermes_dld: Found record 0x0130 at cbc705da [42231.432108] hermes_dld: Found record 0x0140 at cbc705fa [42231.432120] hermes_dld: Found record 0x0150 at cbc70602 [42231.432131] hermes_dld: Using default record 0x0160 at dfa9fb60 [42231.432163] hermes_dld: Found record 0x0101 at cbc70546 [42231.432176] hermes_dld: Found record 0x0103 at cbc7055c [42231.432195] hermes_dld: Found record 0x0104 at cbc7056c [42231.432206] hermes_dld: Found record 0x0105 at cbc70572 [42231.432217] hermes_dld: Found record 0x0105 at cbc70572 [42231.432227] hermes_dld: Found record 0x0105 at cbc70572 [42231.432238] hermes_dld: Found record 0x0107 at cbc7057e [42231.432249] hermes_dld: Found record 0x0109 at cbc7058c [42231.432266] hermes_dld: Using default record 0x0161 at dfa9fb80 [42231.432532] eth1: Apply PDA returned 0 [42231.432595] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [42231.432622] hermes_dld: AUX disable returned 0 [42231.443265] eth1: Program end returned 0 [42231.443273] eth1: hermes_present returned 1 [42231.455482] Restarting tasks ... done. [42231.739962] eth1: New link status: Connected (0001) [43838.005824] usb 1-1: new full speed USB device using ohci_hcd and address 2 [43838.299361] usb 1-1: configuration #1 chosen from 1 choice [43839.316425] Bluetooth: Core ver 2.13 [43839.317891] NET: Registered protocol family 31 [43839.317927] Bluetooth: HCI device and connection manager initialized [43839.318946] Bluetooth: HCI socket layer initialized [43841.252502] Bluetooth: HCI USB driver ver 2.10 [43841.255374] usbcore: registered new interface driver hci_usb [43844.226748] Bluetooth: L2CAP ver 2.11 [43844.226810] Bluetooth: L2CAP socket layer initialized [43844.539415] Bluetooth: RFCOMM socket layer initialized [43844.539546] Bluetooth: RFCOMM TTY layer initialized [43844.539562] Bluetooth: RFCOMM ver 1.10 [43844.890198] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [43845.185333] bluetoothd[5461]: segfault at 38 ip 00000038 sp bfb916bc error 4 in input.so[b7c79000+7000] [44453.767544] usb 1-1: USB disconnect, address 2 [47820.858067] eth1: New link status: AP Out of Range (0004) [47947.959938] eth1: Lucent/Agere firmware doesn't support manual roaming [47949.575958] eth1: New link status: Connected (0001) [47957.710193] eth1: New link status: Disconnected (0002) [47958.955481] eth1: New link status: Connected (0001) [47966.988901] eth1: New link status: Disconnected (0002) [47968.165254] eth1: New link status: Connected (0001) [47976.178863] eth1: New link status: Disconnected (0002) [47977.404271] eth1: New link status: Connected (0001) [47985.468705] eth1: New link status: Disconnected (0002) [47986.767998] eth1: New link status: Connected (0001) [47994.778591] eth1: New link status: Disconnected (0002) [47996.040753] eth1: New link status: Connected (0001) [48004.098458] eth1: New link status: Disconnected (0002) [48005.497074] eth1: New link status: Connected (0001) [48013.528366] eth1: New link status: Disconnected (0002) [48014.838936] eth1: New link status: Connected (0001) [48022.888089] eth1: New link status: Disconnected (0002) [48024.048153] eth1: New link status: Connected (0001) [48032.077956] eth1: New link status: Disconnected (0002) [48033.250517] eth1: New link status: Connected (0001) [50297.545609] PM: Syncing filesystems ... done. [50297.646233] Freezing user space processes ... (elapsed 0.03 seconds) done. [50297.681212] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [50297.682121] Suspending console(s) (use no_console_suspend to debug) [50297.690173] sd 0:0:0:0: [sda] Synchronizing SCSI cache [50298.123778] sd 0:0:0:0: [sda] Stopping disk [50298.862053] ALI 5451 0000:00:06.0: PCI INT A disabled [50298.875490] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [50299.651050] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [50299.661889] ohci_hcd 0000:00:02.0: PCI INT A disabled [50299.677907] ACPI: Preparing to enter system sleep state S3 [50299.678389] Back to C! [50299.690896] ACPI: Waking up from system sleep state S3 [50299.711209] pci 0000:00:01.0: setting latency timer to 64 [50299.722014] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [50299.722055] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [50299.777085] usb usb1: root hub lost power or was reset [50299.788467] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [50299.788519] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [50299.796891] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [50299.796926] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [50299.797163] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [50299.797199] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [50300.088562] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [50300.101754] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [50300.128732] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [50300.372407] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [50300.372417] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [50300.373281] ata2.00: configured for UDMA/33 [50301.111769] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [50301.111884] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [50301.117033] sd 0:0:0:0: [sda] Starting disk [50302.052153] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [50302.052163] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [50302.065782] ata1.00: configured for UDMA/33 [50302.092891] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [50302.093016] sd 0:0:0:0: [sda] Write Protect is off [50302.093025] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [50302.093214] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [50302.345304] eth1: Attempting to download firmware agere_sta_fw.bin [50302.345337] hermes_dld: AUX enable returned 0 [50302.346366] hermes_dld: AUX disable returned 0 [50302.346373] hermes_dld: Actual PDA length 998, Max allowed 1000 [50302.346379] eth1: Read PDA returned 0 [50302.428546] hermes_dld: AUX enable returned 0 [50302.428552] hermes_dld: Enabling volatile, EP 0x000f8000 [50302.429664] hermes_dld: PROGRAM_ENABLE returned 0 [50302.429670] eth1: Program init returned 0 [50302.429678] hermes_dld: Programming block of length 60416 to address 0x001f0000 [50302.477826] hermes_dld: Programming block of length 4096 to address 0x001ef000 [50302.481103] eth1: Program returned 0 [50302.481111] hermes_dld: Found record 0x0003 at d9a9e81c [50302.481130] hermes_dld: Found record 0x0005 at d9a9e8a8 [50302.481148] hermes_dld: Found record 0x0008 at d9a9e8d2 [50302.481163] hermes_dld: Found record 0x0007 at d9a9e8c4 [50302.481180] hermes_dld: Found record 0x0006 at d9a9e8b6 [50302.481197] hermes_dld: Found record 0x0110 at d9a9e99a [50302.481228] hermes_dld: Found record 0x0120 at d9a9e9ba [50302.481259] hermes_dld: Found record 0x0130 at d9a9e9da [50302.481290] hermes_dld: Found record 0x0140 at d9a9e9fa [50302.481302] hermes_dld: Found record 0x0150 at d9a9ea02 [50302.481314] hermes_dld: Using default record 0x0160 at dfa9fb60 [50302.481345] hermes_dld: Found record 0x0101 at d9a9e946 [50302.481358] hermes_dld: Found record 0x0103 at d9a9e95c [50302.481377] hermes_dld: Found record 0x0104 at d9a9e96c [50302.481388] hermes_dld: Found record 0x0105 at d9a9e972 [50302.481398] hermes_dld: Found record 0x0105 at d9a9e972 [50302.481409] hermes_dld: Found record 0x0105 at d9a9e972 [50302.481420] hermes_dld: Found record 0x0107 at d9a9e97e [50302.481430] hermes_dld: Found record 0x0109 at d9a9e98c [50302.481447] hermes_dld: Using default record 0x0161 at dfa9fb80 [50302.481707] eth1: Apply PDA returned 0 [50302.481771] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [50302.481798] hermes_dld: AUX disable returned 0 [50302.492437] eth1: Program end returned 0 [50302.492445] eth1: hermes_present returned 1 [50302.505933] Restarting tasks ... done. [50302.762852] eth1: New link status: Connected (0001) [50804.575989] PM: Syncing filesystems ... done. [50805.172257] Freezing user space processes ... (elapsed 0.03 seconds) done. [50805.205561] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [50805.206384] Suspending console(s) (use no_console_suspend to debug) [50805.214344] sd 0:0:0:0: [sda] Synchronizing SCSI cache [50805.242849] sd 0:0:0:0: [sda] Stopping disk [50805.958673] ALI 5451 0000:00:06.0: PCI INT A disabled [50805.972116] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [50806.727296] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [50806.738516] ohci_hcd 0000:00:02.0: PCI INT A disabled [50806.754618] ACPI: Preparing to enter system sleep state S3 [50806.755007] Back to C! [50806.767381] ACPI: Waking up from system sleep state S3 [50806.790509] pci 0000:00:01.0: setting latency timer to 64 [50806.801743] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [50806.801784] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [50806.857370] usb usb1: root hub lost power or was reset [50806.868640] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [50806.868689] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [50806.876988] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [50806.877025] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [50806.877262] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [50806.877297] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [50807.161848] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [50807.175051] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [50807.202006] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [50807.452350] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [50807.452360] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [50807.453221] ata2.00: configured for UDMA/33 [50808.185062] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [50808.185177] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [50808.190275] sd 0:0:0:0: [sda] Starting disk [50809.115422] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [50809.115434] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [50809.129101] ata1.00: configured for UDMA/33 [50809.153909] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [50809.154036] sd 0:0:0:0: [sda] Write Protect is off [50809.154045] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [50809.154234] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [50809.405266] eth1: Attempting to download firmware agere_sta_fw.bin [50809.405299] hermes_dld: AUX enable returned 0 [50809.406328] hermes_dld: AUX disable returned 0 [50809.406334] hermes_dld: Actual PDA length 998, Max allowed 1000 [50809.406341] eth1: Read PDA returned 0 [50809.488505] hermes_dld: AUX enable returned 0 [50809.488512] hermes_dld: Enabling volatile, EP 0x000f8000 [50809.489624] hermes_dld: PROGRAM_ENABLE returned 0 [50809.489630] eth1: Program init returned 0 [50809.489639] hermes_dld: Programming block of length 60416 to address 0x001f0000 [50809.537788] hermes_dld: Programming block of length 4096 to address 0x001ef000 [50809.541065] eth1: Program returned 0 [50809.541073] hermes_dld: Found record 0x0003 at cbc2d01c [50809.541094] hermes_dld: Found record 0x0005 at cbc2d0a8 [50809.541111] hermes_dld: Found record 0x0008 at cbc2d0d2 [50809.541126] hermes_dld: Found record 0x0007 at cbc2d0c4 [50809.541143] hermes_dld: Found record 0x0006 at cbc2d0b6 [50809.541160] hermes_dld: Found record 0x0110 at cbc2d19a [50809.541192] hermes_dld: Found record 0x0120 at cbc2d1ba [50809.541223] hermes_dld: Found record 0x0130 at cbc2d1da [50809.541254] hermes_dld: Found record 0x0140 at cbc2d1fa [50809.541266] hermes_dld: Found record 0x0150 at cbc2d202 [50809.541278] hermes_dld: Using default record 0x0160 at dfa9fb60 [50809.541309] hermes_dld: Found record 0x0101 at cbc2d146 [50809.541323] hermes_dld: Found record 0x0103 at cbc2d15c [50809.541341] hermes_dld: Found record 0x0104 at cbc2d16c [50809.541352] hermes_dld: Found record 0x0105 at cbc2d172 [50809.541363] hermes_dld: Found record 0x0105 at cbc2d172 [50809.541373] hermes_dld: Found record 0x0105 at cbc2d172 [50809.541384] hermes_dld: Found record 0x0107 at cbc2d17e [50809.541395] hermes_dld: Found record 0x0109 at cbc2d18c [50809.541412] hermes_dld: Using default record 0x0161 at dfa9fb80 [50809.541673] eth1: Apply PDA returned 0 [50809.541736] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [50809.541763] hermes_dld: AUX disable returned 0 [50809.552398] eth1: Program end returned 0 [50809.552405] eth1: hermes_present returned 1 [50809.565899] Restarting tasks ... done. [50809.732319] eth1: New link status: Connected (0001) [55504.827363] zsh[10848]: segfault at 91 ip b7cf94b8 sp bf9b0c70 error 4 in complist.so[b7cf4000+d000] [61631.244919] PM: Syncing filesystems ... done. [61631.861053] Freezing user space processes ... (elapsed 0.19 seconds) done. [61632.055044] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [61632.055834] Suspending console(s) (use no_console_suspend to debug) [61632.063738] sd 0:0:0:0: [sda] Synchronizing SCSI cache [61632.064206] sd 0:0:0:0: [sda] Stopping disk [61632.804255] ALI 5451 0000:00:06.0: PCI INT A disabled [61632.817807] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [61633.571008] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [61633.584090] ohci_hcd 0000:00:02.0: PCI INT A disabled [61633.600202] ACPI: Preparing to enter system sleep state S3 [61633.600590] Back to C! [61633.612290] ACPI: Waking up from system sleep state S3 [61633.633469] pci 0000:00:01.0: setting latency timer to 64 [61633.643996] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [61633.644038] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [61633.699298] usb usb1: root hub lost power or was reset [61633.710682] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [61633.710732] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [61633.719398] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [61633.719436] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [61633.719499] ALI 5451 0000:00:06.0: restoring config space at offset 0x1 (was 0x2900003, writing 0xc2900003) [61633.719687] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [61633.719723] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [61634.017429] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [61634.030633] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [61634.057572] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [61634.241283] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [61634.241294] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [61634.242159] ata2.00: configured for UDMA/33 [61635.040653] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [61635.040768] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [61635.045855] sd 0:0:0:0: [sda] Starting disk [61635.924352] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [61635.924364] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [61635.937982] ata1.00: configured for UDMA/33 [61635.953595] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [61635.953721] sd 0:0:0:0: [sda] Write Protect is off [61635.953730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [61635.953971] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [61636.207494] eth1: Attempting to download firmware agere_sta_fw.bin [61636.207526] hermes_dld: AUX enable returned 0 [61636.208556] hermes_dld: AUX disable returned 0 [61636.208563] hermes_dld: Actual PDA length 998, Max allowed 1000 [61636.208570] eth1: Read PDA returned 0 [61636.290732] hermes_dld: AUX enable returned 0 [61636.290739] hermes_dld: Enabling volatile, EP 0x000f8000 [61636.291862] hermes_dld: PROGRAM_ENABLE returned 0 [61636.291868] eth1: Program init returned 0 [61636.291876] hermes_dld: Programming block of length 60416 to address 0x001f0000 [61636.340026] hermes_dld: Programming block of length 4096 to address 0x001ef000 [61636.343302] eth1: Program returned 0 [61636.343310] hermes_dld: Found record 0x0003 at d9bd301c [61636.343330] hermes_dld: Found record 0x0005 at d9bd30a8 [61636.343347] hermes_dld: Found record 0x0008 at d9bd30d2 [61636.343362] hermes_dld: Found record 0x0007 at d9bd30c4 [61636.343379] hermes_dld: Found record 0x0006 at d9bd30b6 [61636.343396] hermes_dld: Found record 0x0110 at d9bd319a [61636.343428] hermes_dld: Found record 0x0120 at d9bd31ba [61636.343460] hermes_dld: Found record 0x0130 at d9bd31da [61636.343491] hermes_dld: Found record 0x0140 at d9bd31fa [61636.343503] hermes_dld: Found record 0x0150 at d9bd3202 [61636.343514] hermes_dld: Using default record 0x0160 at dfa9fb60 [61636.343546] hermes_dld: Found record 0x0101 at d9bd3146 [61636.343560] hermes_dld: Found record 0x0103 at d9bd315c [61636.343578] hermes_dld: Found record 0x0104 at d9bd316c [61636.343589] hermes_dld: Found record 0x0105 at d9bd3172 [61636.343600] hermes_dld: Found record 0x0105 at d9bd3172 [61636.343610] hermes_dld: Found record 0x0105 at d9bd3172 [61636.343621] hermes_dld: Found record 0x0107 at d9bd317e [61636.343632] hermes_dld: Found record 0x0109 at d9bd318c [61636.343649] hermes_dld: Using default record 0x0161 at dfa9fb80 [61636.343910] eth1: Apply PDA returned 0 [61636.343973] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [61636.344000] hermes_dld: AUX disable returned 0 [61636.354636] eth1: Program end returned 0 [61636.354643] eth1: hermes_present returned 1 [61636.368097] Restarting tasks ... done. [61636.595445] eth1: New link status: Connected (0001) [64877.744271] PM: Syncing filesystems ... done. [64878.267659] Freezing user space processes ... (elapsed 0.01 seconds) done. [64878.281415] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [64878.282224] Suspending console(s) (use no_console_suspend to debug) [64878.290151] sd 0:0:0:0: [sda] Synchronizing SCSI cache [64878.332258] sd 0:0:0:0: [sda] Stopping disk [64879.063931] ALI 5451 0000:00:06.0: PCI INT A disabled [64879.077485] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [64879.843113] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [64879.853767] ohci_hcd 0000:00:02.0: PCI INT A disabled [64879.869871] ACPI: Preparing to enter system sleep state S3 [64879.870264] Back to C! [64879.882693] ACPI: Waking up from system sleep state S3 [64879.903825] pci 0000:00:01.0: setting latency timer to 64 [64879.917000] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [64879.917041] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [64879.972304] usb usb1: root hub lost power or was reset [64879.983689] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [64879.983740] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [64879.990761] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [64879.990798] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [64879.991035] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [64879.991070] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [64880.277104] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [64880.290308] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [64880.317269] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [64880.567810] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [64880.567821] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [64880.574648] ata2.00: configured for UDMA/33 [64881.300324] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [64881.300440] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [64881.305536] sd 0:0:0:0: [sda] Starting disk [64882.337366] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [64882.337378] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [64882.350997] ata1.00: configured for UDMA/33 [64882.375306] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [64882.375432] sd 0:0:0:0: [sda] Write Protect is off [64882.375440] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [64882.375631] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [64882.627192] eth1: Attempting to download firmware agere_sta_fw.bin [64882.627225] hermes_dld: AUX enable returned 0 [64882.628253] hermes_dld: AUX disable returned 0 [64882.628260] hermes_dld: Actual PDA length 998, Max allowed 1000 [64882.628266] eth1: Read PDA returned 0 [64882.710433] hermes_dld: AUX enable returned 0 [64882.710440] hermes_dld: Enabling volatile, EP 0x000f8000 [64882.711552] hermes_dld: PROGRAM_ENABLE returned 0 [64882.711558] eth1: Program init returned 0 [64882.711566] hermes_dld: Programming block of length 60416 to address 0x001f0000 [64882.759690] hermes_dld: Programming block of length 4096 to address 0x001ef000 [64882.762970] eth1: Program returned 0 [64882.762979] hermes_dld: Found record 0x0003 at cda4881c [64882.762999] hermes_dld: Found record 0x0005 at cda488a8 [64882.763016] hermes_dld: Found record 0x0008 at cda488d2 [64882.763032] hermes_dld: Found record 0x0007 at cda488c4 [64882.763048] hermes_dld: Found record 0x0006 at cda488b6 [64882.763065] hermes_dld: Found record 0x0110 at cda4899a [64882.763097] hermes_dld: Found record 0x0120 at cda489ba [64882.763128] hermes_dld: Found record 0x0130 at cda489da [64882.763159] hermes_dld: Found record 0x0140 at cda489fa [64882.763171] hermes_dld: Found record 0x0150 at cda48a02 [64882.763182] hermes_dld: Using default record 0x0160 at dfa9fb60 [64882.763214] hermes_dld: Found record 0x0101 at cda48946 [64882.763227] hermes_dld: Found record 0x0103 at cda4895c [64882.763246] hermes_dld: Found record 0x0104 at cda4896c [64882.763256] hermes_dld: Found record 0x0105 at cda48972 [64882.763267] hermes_dld: Found record 0x0105 at cda48972 [64882.763278] hermes_dld: Found record 0x0105 at cda48972 [64882.763288] hermes_dld: Found record 0x0107 at cda4897e [64882.763299] hermes_dld: Found record 0x0109 at cda4898c [64882.763316] hermes_dld: Using default record 0x0161 at dfa9fb80 [64882.763577] eth1: Apply PDA returned 0 [64882.763640] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [64882.763667] hermes_dld: AUX disable returned 0 [64882.774301] eth1: Program end returned 0 [64882.774308] eth1: hermes_present returned 1 [64882.787789] Restarting tasks ... done. [64883.132454] eth1: New link status: Connected (0001) [66312.934643] PM: Syncing filesystems ... done. [66313.587821] Freezing user space processes ... (elapsed 0.00 seconds) done. [66313.596380] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [66313.597306] Suspending console(s) (use no_console_suspend to debug) [66313.605260] sd 0:0:0:0: [sda] Synchronizing SCSI cache [66313.656369] sd 0:0:0:0: [sda] Stopping disk [66314.377122] ALI 5451 0000:00:06.0: PCI INT A disabled [66314.390658] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [66315.158435] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [66315.170276] ohci_hcd 0000:00:02.0: PCI INT A disabled [66315.186392] ACPI: Preparing to enter system sleep state S3 [66315.186788] Back to C! [66315.199356] ACPI: Waking up from system sleep state S3 [66315.220472] pci 0000:00:01.0: setting latency timer to 64 [66315.233511] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [66315.233553] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [66315.288814] usb usb1: root hub lost power or was reset [66315.300265] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [66315.300317] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [66315.307547] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [66315.307583] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [66315.307821] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [66315.307856] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [66315.560293] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [66315.573474] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [66315.600465] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [66315.884130] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [66315.884141] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [66315.885005] ata2.00: configured for UDMA/33 [66316.583500] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [66316.583617] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [66316.588980] sd 0:0:0:0: [sda] Starting disk [66317.563889] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [66317.563901] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [66317.577548] ata1.00: configured for UDMA/33 [66317.595677] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [66317.595800] sd 0:0:0:0: [sda] Write Protect is off [66317.595809] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [66317.596000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [66317.847036] eth1: Attempting to download firmware agere_sta_fw.bin [66317.847068] hermes_dld: AUX enable returned 0 [66317.848097] hermes_dld: AUX disable returned 0 [66317.848104] hermes_dld: Actual PDA length 998, Max allowed 1000 [66317.848110] eth1: Read PDA returned 0 [66317.930277] hermes_dld: AUX enable returned 0 [66317.930284] hermes_dld: Enabling volatile, EP 0x000f8000 [66317.931396] hermes_dld: PROGRAM_ENABLE returned 0 [66317.931402] eth1: Program init returned 0 [66317.931411] hermes_dld: Programming block of length 60416 to address 0x001f0000 [66317.979552] hermes_dld: Programming block of length 4096 to address 0x001ef000 [66317.982830] eth1: Program returned 0 [66317.982839] hermes_dld: Found record 0x0003 at cda4841c [66317.982859] hermes_dld: Found record 0x0005 at cda484a8 [66317.982877] hermes_dld: Found record 0x0008 at cda484d2 [66317.982892] hermes_dld: Found record 0x0007 at cda484c4 [66317.982909] hermes_dld: Found record 0x0006 at cda484b6 [66317.982926] hermes_dld: Found record 0x0110 at cda4859a [66317.982957] hermes_dld: Found record 0x0120 at cda485ba [66317.982988] hermes_dld: Found record 0x0130 at cda485da [66317.983019] hermes_dld: Found record 0x0140 at cda485fa [66317.983031] hermes_dld: Found record 0x0150 at cda48602 [66317.983043] hermes_dld: Using default record 0x0160 at dfa9fb60 [66317.983074] hermes_dld: Found record 0x0101 at cda48546 [66317.983088] hermes_dld: Found record 0x0103 at cda4855c [66317.983106] hermes_dld: Found record 0x0104 at cda4856c [66317.983117] hermes_dld: Found record 0x0105 at cda48572 [66317.983128] hermes_dld: Found record 0x0105 at cda48572 [66317.983138] hermes_dld: Found record 0x0105 at cda48572 [66317.983149] hermes_dld: Found record 0x0107 at cda4857e [66317.983160] hermes_dld: Found record 0x0109 at cda4858c [66317.983177] hermes_dld: Using default record 0x0161 at dfa9fb80 [66317.983437] eth1: Apply PDA returned 0 [66317.983500] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [66317.983527] hermes_dld: AUX disable returned 0 [66317.994163] eth1: Program end returned 0 [66317.994170] eth1: hermes_present returned 1 [66318.007648] Restarting tasks ... done. [66318.318390] eth1: New link status: Connected (0001) [77688.314910] PM: Syncing filesystems ... done. [77688.453840] Freezing user space processes ... (elapsed 0.00 seconds) done. [77688.462836] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [77688.463674] Suspending console(s) (use no_console_suspend to debug) [77688.471632] sd 0:0:0:0: [sda] Synchronizing SCSI cache [77688.523507] sd 0:0:0:0: [sda] Stopping disk [77689.235987] ALI 5451 0000:00:06.0: PCI INT A disabled [77689.249402] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [77690.020144] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [77690.032497] ohci_hcd 0000:00:02.0: PCI INT A disabled [77690.048637] ACPI: Preparing to enter system sleep state S3 [77690.048984] Back to C! [77690.061223] ACPI: Waking up from system sleep state S3 [77690.081637] pci 0000:00:01.0: setting latency timer to 64 [77690.092386] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [77690.092427] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [77690.147692] usb usb1: root hub lost power or was reset [77690.159076] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [77690.159125] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [77690.166307] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [77690.166343] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [77690.166406] ALI 5451 0000:00:06.0: restoring config space at offset 0x1 (was 0x2900003, writing 0xc2900003) [77690.166595] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [77690.166630] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [77690.442486] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [77690.455694] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [77690.482702] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [77690.743007] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [77690.743016] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [77690.749571] ata2.00: configured for UDMA/33 [77691.465712] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [77691.466285] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [77691.473702] sd 0:0:0:0: [sda] Starting disk [77692.529416] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [77692.529428] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [77692.543044] ata1.00: configured for UDMA/33 [77692.563671] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [77692.563799] sd 0:0:0:0: [sda] Write Protect is off [77692.563808] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [77692.563999] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [77692.815911] eth1: Attempting to download firmware agere_sta_fw.bin [77692.815944] hermes_dld: AUX enable returned 0 [77692.816975] hermes_dld: AUX disable returned 0 [77692.816981] hermes_dld: Actual PDA length 998, Max allowed 1000 [77692.816987] eth1: Read PDA returned 0 [77692.899163] hermes_dld: AUX enable returned 0 [77692.899170] hermes_dld: Enabling volatile, EP 0x000f8000 [77692.900270] hermes_dld: PROGRAM_ENABLE returned 0 [77692.900276] eth1: Program init returned 0 [77692.900284] hermes_dld: Programming block of length 60416 to address 0x001f0000 [77692.948425] hermes_dld: Programming block of length 4096 to address 0x001ef000 [77692.951705] eth1: Program returned 0 [77692.951713] hermes_dld: Found record 0x0003 at d222301c [77692.951733] hermes_dld: Found record 0x0005 at d22230a8 [77692.951750] hermes_dld: Found record 0x0008 at d22230d2 [77692.951766] hermes_dld: Found record 0x0007 at d22230c4 [77692.951782] hermes_dld: Found record 0x0006 at d22230b6 [77692.951799] hermes_dld: Found record 0x0110 at d222319a [77692.951831] hermes_dld: Found record 0x0120 at d22231ba [77692.951862] hermes_dld: Found record 0x0130 at d22231da [77692.951893] hermes_dld: Found record 0x0140 at d22231fa [77692.951905] hermes_dld: Found record 0x0150 at d2223202 [77692.951917] hermes_dld: Using default record 0x0160 at dfa9fb60 [77692.951948] hermes_dld: Found record 0x0101 at d2223146 [77692.951961] hermes_dld: Found record 0x0103 at d222315c [77692.951980] hermes_dld: Found record 0x0104 at d222316c [77692.951990] hermes_dld: Found record 0x0105 at d2223172 [77692.952001] hermes_dld: Found record 0x0105 at d2223172 [77692.952012] hermes_dld: Found record 0x0105 at d2223172 [77692.952022] hermes_dld: Found record 0x0107 at d222317e [77692.952033] hermes_dld: Found record 0x0109 at d222318c [77692.952050] hermes_dld: Using default record 0x0161 at dfa9fb80 [77692.952313] eth1: Apply PDA returned 0 [77692.952377] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [77692.952404] hermes_dld: AUX disable returned 0 [77692.963042] eth1: Program end returned 0 [77692.963049] eth1: hermes_present returned 1 [77692.976549] Restarting tasks ... <6>eth1: New link status: Connected (0001) [77693.150351] done. [85470.789475] PM: Syncing filesystems ... done. [85471.495561] Freezing user space processes ... (elapsed 0.08 seconds) done. [85471.578492] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [85471.579308] Suspending console(s) (use no_console_suspend to debug) [85471.587268] sd 0:0:0:0: [sda] Synchronizing SCSI cache [85471.587765] sd 0:0:0:0: [sda] Stopping disk [85472.311872] ALI 5451 0000:00:06.0: PCI INT A disabled [85472.325422] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [85473.101782] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [85473.115036] ohci_hcd 0000:00:02.0: PCI INT A disabled [85473.131145] ACPI: Preparing to enter system sleep state S3 [85473.131540] Back to C! [85473.142621] ACPI: Waking up from system sleep state S3 [85473.161743] pci 0000:00:01.0: setting latency timer to 64 [85473.174935] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [85473.174978] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [85473.230246] usb usb1: root hub lost power or was reset [85473.241630] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [85473.241681] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [85473.247988] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [85473.248023] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [85473.248317] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [85473.248353] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [85473.548377] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [85473.561584] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [85473.588566] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [85473.825572] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [85473.825583] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [85473.826433] ata2.00: configured for UDMA/33 [85474.571603] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [85474.571718] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [85474.583491] sd 0:0:0:0: [sda] Starting disk [85475.505304] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [85475.505316] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [85475.518936] ata1.00: configured for UDMA/33 [85475.537042] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [85475.537168] sd 0:0:0:0: [sda] Write Protect is off [85475.537177] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [85475.537367] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [85475.788511] eth1: Attempting to download firmware agere_sta_fw.bin [85475.788544] hermes_dld: AUX enable returned 0 [85475.789576] hermes_dld: AUX disable returned 0 [85475.789582] hermes_dld: Actual PDA length 998, Max allowed 1000 [85475.789588] eth1: Read PDA returned 0 [85475.871751] hermes_dld: AUX enable returned 0 [85475.871758] hermes_dld: Enabling volatile, EP 0x000f8000 [85475.872881] hermes_dld: PROGRAM_ENABLE returned 0 [85475.872887] eth1: Program init returned 0 [85475.872895] hermes_dld: Programming block of length 60416 to address 0x001f0000 [85475.921071] hermes_dld: Programming block of length 4096 to address 0x001ef000 [85475.924350] eth1: Program returned 0 [85475.924358] hermes_dld: Found record 0x0003 at c2bc001c [85475.924378] hermes_dld: Found record 0x0005 at c2bc00a8 [85475.924395] hermes_dld: Found record 0x0008 at c2bc00d2 [85475.924410] hermes_dld: Found record 0x0007 at c2bc00c4 [85475.924427] hermes_dld: Found record 0x0006 at c2bc00b6 [85475.924444] hermes_dld: Found record 0x0110 at c2bc019a [85475.924476] hermes_dld: Found record 0x0120 at c2bc01ba [85475.924508] hermes_dld: Found record 0x0130 at c2bc01da [85475.924538] hermes_dld: Found record 0x0140 at c2bc01fa [85475.924551] hermes_dld: Found record 0x0150 at c2bc0202 [85475.924562] hermes_dld: Using default record 0x0160 at dfa9fb60 [85475.924594] hermes_dld: Found record 0x0101 at c2bc0146 [85475.924607] hermes_dld: Found record 0x0103 at c2bc015c [85475.924626] hermes_dld: Found record 0x0104 at c2bc016c [85475.924637] hermes_dld: Found record 0x0105 at c2bc0172 [85475.924647] hermes_dld: Found record 0x0105 at c2bc0172 [85475.924658] hermes_dld: Found record 0x0105 at c2bc0172 [85475.924669] hermes_dld: Found record 0x0107 at c2bc017e [85475.924679] hermes_dld: Found record 0x0109 at c2bc018c [85475.924696] hermes_dld: Using default record 0x0161 at dfa9fb80 [85475.924957] eth1: Apply PDA returned 0 [85475.925021] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [85475.925048] hermes_dld: AUX disable returned 0 [85475.935690] eth1: Program end returned 0 [85475.935698] eth1: hermes_present returned 1 [85475.949170] Restarting tasks ... done. [85476.201226] eth1: New link status: Connected (0001) [89227.527683] PM: Syncing filesystems ... done. [89228.059563] Freezing user space processes ... (elapsed 0.00 seconds) done. [89228.069081] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [89228.069942] Suspending console(s) (use no_console_suspend to debug) [89228.077938] sd 0:0:0:0: [sda] Synchronizing SCSI cache [89228.155227] sd 0:0:0:0: [sda] Stopping disk [89228.901496] ALI 5451 0000:00:06.0: PCI INT A disabled [89228.915051] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [89229.667927] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [89229.681327] ohci_hcd 0000:00:02.0: PCI INT A disabled [89229.697438] ACPI: Preparing to enter system sleep state S3 [89229.697828] Back to C! [89229.710398] ACPI: Waking up from system sleep state S3 [89229.730969] pci 0000:00:01.0: setting latency timer to 64 [89229.741237] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [89229.741279] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [89229.796535] usb usb1: root hub lost power or was reset [89229.807922] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [89229.807972] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [89229.815096] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [89229.815131] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [89229.815367] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [89229.815402] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [89230.111332] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [89230.124541] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [89230.151520] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [89230.392072] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [89230.392082] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [89230.398607] ata2.00: configured for UDMA/33 [89231.134558] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [89231.134674] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [89231.139935] sd 0:0:0:0: [sda] Starting disk [89231.964928] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [89231.964939] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [89231.978557] ata1.00: configured for UDMA/33 [89232.004870] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [89232.004996] sd 0:0:0:0: [sda] Write Protect is off [89232.005005] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [89232.005195] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [89232.258090] eth1: Attempting to download firmware agere_sta_fw.bin [89232.258122] hermes_dld: AUX enable returned 0 [89232.259153] hermes_dld: AUX disable returned 0 [89232.259159] hermes_dld: Actual PDA length 998, Max allowed 1000 [89232.259166] eth1: Read PDA returned 0 [89232.341342] hermes_dld: AUX enable returned 0 [89232.341349] hermes_dld: Enabling volatile, EP 0x000f8000 [89232.342438] hermes_dld: PROGRAM_ENABLE returned 0 [89232.342444] eth1: Program init returned 0 [89232.342452] hermes_dld: Programming block of length 60416 to address 0x001f0000 [89232.390660] hermes_dld: Programming block of length 4096 to address 0x001ef000 [89232.393941] eth1: Program returned 0 [89232.393949] hermes_dld: Found record 0x0003 at c5c1241c [89232.393969] hermes_dld: Found record 0x0005 at c5c124a8 [89232.393986] hermes_dld: Found record 0x0008 at c5c124d2 [89232.394002] hermes_dld: Found record 0x0007 at c5c124c4 [89232.394018] hermes_dld: Found record 0x0006 at c5c124b6 [89232.394035] hermes_dld: Found record 0x0110 at c5c1259a [89232.394067] hermes_dld: Found record 0x0120 at c5c125ba [89232.394099] hermes_dld: Found record 0x0130 at c5c125da [89232.394130] hermes_dld: Found record 0x0140 at c5c125fa [89232.394142] hermes_dld: Found record 0x0150 at c5c12602 [89232.394153] hermes_dld: Using default record 0x0160 at dfa9fb60 [89232.394185] hermes_dld: Found record 0x0101 at c5c12546 [89232.394199] hermes_dld: Found record 0x0103 at c5c1255c [89232.394217] hermes_dld: Found record 0x0104 at c5c1256c [89232.394228] hermes_dld: Found record 0x0105 at c5c12572 [89232.394239] hermes_dld: Found record 0x0105 at c5c12572 [89232.394249] hermes_dld: Found record 0x0105 at c5c12572 [89232.394260] hermes_dld: Found record 0x0107 at c5c1257e [89232.394271] hermes_dld: Found record 0x0109 at c5c1258c [89232.394288] hermes_dld: Using default record 0x0161 at dfa9fb80 [89232.394549] eth1: Apply PDA returned 0 [89232.394612] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [89232.394640] hermes_dld: AUX disable returned 0 [89232.405280] eth1: Program end returned 0 [89232.405288] eth1: hermes_present returned 1 [89232.418782] Restarting tasks ... done. [89232.548642] eth1: New link status: Connected (0001) [89479.104958] ------------[ cut here ]------------ [89479.105038] WARNING: at /home/bor/src/linux-git/lib/list_debug.c:30 __list_add+0x8f/0xa0() [89479.105058] list_add corruption. prev->next should be next (dddb3568), but was cbc28978. (prev=dddb3568). [89479.105075] Modules linked in: bnep rfcomm l2cap hci_usb bluetooth tun autofs4 af_packet irnet ppp_generic slhc ircomm_tty ircomm binfmt_misc loop dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath dm_mod nvram toshiba cryptomgr aead crypto_blkcipher michael_mic crypto_algapi orinoco_cs orinoco hermes_dld hermes pcmcia firmware_class snd_ali5451 snd_ac97_codec ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer smsc_ircc2 snd_mixer_oss rtc_cmos irda snd rtc_core crc_ccitt rtc_lib yenta_socket pcspkr sr_mod rsrc_nonstatic soundcore evdev psmouse i2c_ali1535 snd_page_alloc cdrom pcmcia_core i2c_core alim1535_wdt fan sg video output toshiba_acpi rfkill thermal backlight processor input_polldev battery ali_agp ac button ohci_hcd agpgart usbcore pata_ali libata sd_mod scsi_mod reiserfs [89479.106002] Pid: 15746, comm: X Not tainted 2.6.28-1avb #26 [89479.106020] Call Trace: [89479.106062] [<c011d3b0>] warn_slowpath+0x60/0x80 [89479.106104] [<c01073d0>] ? native_sched_clock+0x20/0x70 [89479.106194] [<c013d825>] ? lock_release_holdtime+0x35/0x200 [89479.106218] [<c018d9f0>] ? __slab_alloc+0x550/0x560 [89479.106254] [<c02f9c9d>] ? _spin_unlock+0x1d/0x20 [89479.106270] [<c018d9f0>] ? __slab_alloc+0x550/0x560 [89479.106302] [<c01ff2a7>] ? delay_tsc+0x17/0x24 [89479.106319] [<c01ff221>] ? __const_udelay+0x21/0x30 [89479.106376] [<dfa8b1e2>] ? hermes_bap_seek+0x112/0x1e0 [hermes] [89479.106396] [<c013d7eb>] ? trace_hardirqs_off+0xb/0x10 [89479.106418] [<c018e307>] ? __kmalloc_track_caller+0xb7/0x110 [89479.106448] [<c028eefc>] ? dev_alloc_skb+0x1c/0x30 [89479.106465] [<c028eefc>] ? dev_alloc_skb+0x1c/0x30 [89479.106482] [<c020e13f>] __list_add+0x8f/0xa0 [89479.106551] [<dfd0fcae>] orinoco_interrupt+0xcae/0x16c0 [orinoco] [89479.106574] [<c013b0e3>] ? tick_dev_program_event+0x33/0xb0 [89479.106594] [<c01073d0>] ? native_sched_clock+0x20/0x70 [89479.106613] [<c013d825>] ? lock_release_holdtime+0x35/0x200 [89479.106662] [<c013d7eb>] ? trace_hardirqs_off+0xb/0x10 [89479.106892] [<dfe7faa7>] ? usb_hcd_irq+0x97/0xa0 [usbcore] [89479.106926] [<c015ba79>] handle_IRQ_event+0x29/0x60 [89479.106947] [<c015cf89>] handle_level_irq+0x69/0xe0 [89479.106963] [<c015cf20>] ? handle_level_irq+0x0/0xe0 [89479.106977] <IRQ> [<c02ca933>] ? tcp_v4_rcv+0x633/0x6e0 [89479.107025] [<c0103f0c>] ? common_interrupt+0x28/0x30 [89479.107057] [<c02a0000>] ? sk_run_filter+0x320/0x7a0 [89479.107078] [<c020e041>] ? list_del+0x21/0x90 [89479.107106] [<dfd0d24e>] ? orinoco_rx_isr_tasklet+0x2ce/0x480 [orinoco] [89479.107131] [<c01402e0>] ? __lock_acquire+0x160/0x1650 [89479.107151] [<c01073d0>] ? native_sched_clock+0x20/0x70 [89479.107169] [<c013d825>] ? lock_release_holdtime+0x35/0x200 [89479.107200] [<c012249a>] ? irq_enter+0xa/0x60 [89479.107217] [<c0104e52>] ? do_IRQ+0xd2/0x130 [89479.107518] [<c010342c>] ? restore_nocheck_notrace+0x0/0xe [89479.107542] [<c0122830>] ? __do_softirq+0x0/0x110 [89479.107561] [<c013f7b4>] ? trace_hardirqs_on_caller+0x74/0x140 [89479.107583] [<c01ff678>] ? trace_hardirqs_on_thunk+0xc/0x10 [89479.107602] [<c0122087>] ? tasklet_action+0x27/0x90 [89479.107620] [<c013f7b4>] ? trace_hardirqs_on_caller+0x74/0x140 [89479.107638] [<c01220a3>] ? tasklet_action+0x43/0x90 [89479.107655] [<c012289f>] ? __do_softirq+0x6f/0x110 [89479.107674] [<c0122830>] ? __do_softirq+0x0/0x110 [89479.107685] <IRQ> [<c015cf20>] ? handle_level_irq+0x0/0xe0 [89479.107715] [<c012246d>] ? irq_exit+0x5d/0x80 [89479.107732] [<c0104e52>] ? do_IRQ+0xd2/0x130 [89479.107747] [<c0103337>] ? sysenter_exit+0xf/0x16 [89479.107765] [<c013f83d>] ? trace_hardirqs_on_caller+0xfd/0x140 [89479.107782] [<c0103f0c>] ? common_interrupt+0x28/0x30 [89479.107797] ---[ end trace a1fc0a52df4a729d ]--- View attachment "config" of type "text/plain" (58004 bytes) Download attachment "signature.asc " of type "application/pgp-signature" (198 bytes)
Powered by blists - more mailing lists