| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20090105181552.7559.85073.stgit@fedora.yogi>
Date: Mon, 05 Jan 2009 23:45:52 +0530
From: Balaji Rao <balajirrao@...nmoko.org>
To: linux-kernel@...r.kernel.org
Cc: Samuel Ortiz <sameo@...nedhand.com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Andy Green <andy@...nmoko.com>,
Liam Girdwood <lrg@...mlogic.co.uk>
Subject: [PATCH V3 7/7] regulator: PCF50633 pmic driver
Changes from V1:
- Removed support for suspend_enable & suspend_disable functions.
Signed-off-by: Balaji Rao <balajirrao@...nmoko.org>
Cc: Andy Green <andy@...nmoko.com>
Cc: Liam Girdwood <lrg@...mlogic.co.uk>
Acked-by: Mark Brown <broonie@...nsource.wolfsonmicro.com>
---
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1
drivers/regulator/pcf50633-regulator.c | 329 ++++++++++++++++++++++++++++++++
include/linux/mfd/pcf50633/pmic.h | 67 +++++++
4 files changed, 404 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/pcf50633-regulator.c
create mode 100644 include/linux/mfd/pcf50633/pmic.h
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 39360e2..e7e0cf1 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -73,4 +73,11 @@ config REGULATOR_DA903X
Say y here to support the BUCKs and LDOs regulators found on
Dialog Semiconductor DA9030/DA9034 PMIC.
+config REGULATOR_PCF50633
+ tristate "PCF50633 regulator driver"
+ depends on MFD_PCF50633
+ help
+ Say Y here to support the voltage regulators and convertors
+ on PCF50633
+
endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 254d40c..61b30c6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -11,5 +11,6 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
+obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
new file mode 100644
index 0000000..4cc85ec
--- /dev/null
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -0,0 +1,329 @@
+/* NXP PCF50633 PMIC Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <balajirrao@...nmoko.org>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte and Andy Green and Werner Almesberger
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#define PCF50633_REGULATOR(_name, _id) \
+ { \
+ .name = _name, \
+ .id = _id, \
+ .ops = &pcf50633_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }
+
+static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = {
+ [PCF50633_REGULATOR_AUTO] = PCF50633_REG_AUTOOUT,
+ [PCF50633_REGULATOR_DOWN1] = PCF50633_REG_DOWN1OUT,
+ [PCF50633_REGULATOR_DOWN2] = PCF50633_REG_DOWN2OUT,
+ [PCF50633_REGULATOR_MEMLDO] = PCF50633_REG_MEMLDOOUT,
+ [PCF50633_REGULATOR_LDO1] = PCF50633_REG_LDO1OUT,
+ [PCF50633_REGULATOR_LDO2] = PCF50633_REG_LDO2OUT,
+ [PCF50633_REGULATOR_LDO3] = PCF50633_REG_LDO3OUT,
+ [PCF50633_REGULATOR_LDO4] = PCF50633_REG_LDO4OUT,
+ [PCF50633_REGULATOR_LDO5] = PCF50633_REG_LDO5OUT,
+ [PCF50633_REGULATOR_LDO6] = PCF50633_REG_LDO6OUT,
+ [PCF50633_REGULATOR_HCLDO] = PCF50633_REG_HCLDOOUT,
+};
+
+/* Bits from voltage value */
+static u8 auto_voltage_bits(unsigned int millivolts)
+{
+ if (millivolts < 1800)
+ return 0;
+ if (millivolts > 3800)
+ return 0xff;
+
+ millivolts -= 625;
+
+ return millivolts / 25;
+}
+
+static u8 down_voltage_bits(unsigned int millivolts)
+{
+ if (millivolts < 625)
+ return 0;
+ else if (millivolts > 3000)
+ return 0xff;
+
+ millivolts -= 625;
+
+ return millivolts / 25;
+}
+
+static u8 ldo_voltage_bits(unsigned int millivolts)
+{
+ if (millivolts < 900)
+ return 0;
+ else if (millivolts > 3600)
+ return 0x1f;
+
+ millivolts -= 900;
+ return millivolts / 100;
+}
+
+/* Obtain voltage value from bits */
+static unsigned int auto_voltage_value(u8 bits)
+{
+ if (bits < 0x2f)
+ return 0;
+
+ return 625 + (bits * 25);
+}
+
+
+static unsigned int down_voltage_value(u8 bits)
+{
+ return 625 + (bits * 25);
+}
+
+
+static unsigned int ldo_voltage_value(u8 bits)
+{
+ bits &= 0x1f;
+
+ return 900 + (bits * 100);
+}
+
+static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct pcf50633 *pcf;
+ int regulator_id, millivolts;
+ u8 volt_bits, regnr;
+
+ pcf = rdev_get_drvdata(rdev);
+
+ regulator_id = rdev_get_id(rdev);
+ if (regulator_id >= PCF50633_NUM_REGULATORS)
+ return -EINVAL;
+
+ millivolts = min_uV / 1000;
+
+ regnr = pcf50633_regulator_registers[regulator_id];
+
+ switch (regulator_id) {
+ case PCF50633_REGULATOR_AUTO:
+ volt_bits = auto_voltage_bits(millivolts);
+ break;
+ case PCF50633_REGULATOR_DOWN1:
+ volt_bits = down_voltage_bits(millivolts);
+ break;
+ case PCF50633_REGULATOR_DOWN2:
+ volt_bits = down_voltage_bits(millivolts);
+ break;
+ case PCF50633_REGULATOR_LDO1:
+ case PCF50633_REGULATOR_LDO2:
+ case PCF50633_REGULATOR_LDO3:
+ case PCF50633_REGULATOR_LDO4:
+ case PCF50633_REGULATOR_LDO5:
+ case PCF50633_REGULATOR_LDO6:
+ case PCF50633_REGULATOR_HCLDO:
+ volt_bits = ldo_voltage_bits(millivolts);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return pcf50633_reg_write(pcf, regnr, volt_bits);
+}
+
+static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev)
+{
+ struct pcf50633 *pcf;
+ int regulator_id, millivolts, volt_bits;
+ u8 regnr;
+
+ pcf = rdev_get_drvdata(rdev);;
+
+ regulator_id = rdev_get_id(rdev);
+ if (regulator_id >= PCF50633_NUM_REGULATORS)
+ return -EINVAL;
+
+ regnr = pcf50633_regulator_registers[regulator_id];
+
+ volt_bits = pcf50633_reg_read(pcf, regnr);
+ if (volt_bits < 0)
+ return -1;
+
+ switch (regulator_id) {
+ case PCF50633_REGULATOR_AUTO:
+ millivolts = auto_voltage_value(volt_bits);
+ break;
+ case PCF50633_REGULATOR_DOWN1:
+ millivolts = down_voltage_value(volt_bits);
+ break;
+ case PCF50633_REGULATOR_DOWN2:
+ millivolts = down_voltage_value(volt_bits);
+ break;
+ case PCF50633_REGULATOR_LDO1:
+ case PCF50633_REGULATOR_LDO2:
+ case PCF50633_REGULATOR_LDO3:
+ case PCF50633_REGULATOR_LDO4:
+ case PCF50633_REGULATOR_LDO5:
+ case PCF50633_REGULATOR_LDO6:
+ case PCF50633_REGULATOR_HCLDO:
+ millivolts = ldo_voltage_value(volt_bits);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return millivolts * 1000;
+}
+
+static int pcf50633_regulator_enable(struct regulator_dev *rdev)
+{
+ struct pcf50633 *pcf = rdev_get_drvdata(rdev);
+ int regulator_id;
+ u8 regnr;
+
+ regulator_id = rdev_get_id(rdev);
+ if (regulator_id >= PCF50633_NUM_REGULATORS)
+ return -EINVAL;
+
+ /* The *ENA register is always one after the *OUT register */
+ regnr = pcf50633_regulator_registers[regulator_id] + 1;
+
+ return pcf50633_reg_set_bit_mask(pcf, regnr, PCF50633_REGULATOR_ON,
+ PCF50633_REGULATOR_ON);
+}
+
+static int pcf50633_regulator_disable(struct regulator_dev *rdev)
+{
+ struct pcf50633 *pcf = rdev_get_drvdata(rdev);
+ int regulator_id;
+ u8 regnr;
+
+ regulator_id = rdev_get_id(rdev);
+ if (regulator_id >= PCF50633_NUM_REGULATORS)
+ return -EINVAL;
+
+ /* the *ENA register is always one after the *OUT register */
+ regnr = pcf50633_regulator_registers[regulator_id] + 1;
+
+ return pcf50633_reg_set_bit_mask(pcf, regnr,
+ PCF50633_REGULATOR_ON, 0);
+}
+
+static int pcf50633_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct pcf50633 *pcf = rdev_get_drvdata(rdev);
+ int regulator_id = rdev_get_id(rdev);
+ u8 regnr;
+
+ regulator_id = rdev_get_id(rdev);
+ if (regulator_id >= PCF50633_NUM_REGULATORS)
+ return -EINVAL;
+
+ /* the *ENA register is always one after the *OUT register */
+ regnr = pcf50633_regulator_registers[regulator_id] + 1;
+
+ return pcf50633_reg_read(pcf, regnr) & PCF50633_REGULATOR_ON;
+}
+
+static struct regulator_ops pcf50633_regulator_ops = {
+ .set_voltage = pcf50633_regulator_set_voltage,
+ .get_voltage = pcf50633_regulator_get_voltage,
+ .enable = pcf50633_regulator_enable,
+ .disable = pcf50633_regulator_disable,
+ .is_enabled = pcf50633_regulator_is_enabled,
+};
+
+static struct regulator_desc regulators[] = {
+ [PCF50633_REGULATOR_AUTO] =
+ PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO),
+ [PCF50633_REGULATOR_DOWN1] =
+ PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1),
+ [PCF50633_REGULATOR_DOWN2] =
+ PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2),
+ [PCF50633_REGULATOR_LDO1] =
+ PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1),
+ [PCF50633_REGULATOR_LDO2] =
+ PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2),
+ [PCF50633_REGULATOR_LDO3] =
+ PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3),
+ [PCF50633_REGULATOR_LDO4] =
+ PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4),
+ [PCF50633_REGULATOR_LDO5] =
+ PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5),
+ [PCF50633_REGULATOR_LDO6] =
+ PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6),
+ [PCF50633_REGULATOR_HCLDO] =
+ PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO),
+ [PCF50633_REGULATOR_MEMLDO] =
+ PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO),
+};
+
+static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev;
+ struct pcf50633 *pcf;
+
+ /* Already set by core driver */
+ pcf = platform_get_drvdata(pdev);
+
+ rdev = regulator_register(®ulators[pdev->id], &pdev->dev, pcf);
+ if (IS_ERR(rdev))
+ return PTR_ERR(rdev);
+
+ if (pcf->pdata->regulator_registered)
+ pcf->pdata->regulator_registered(pcf, pdev->id);
+
+ return 0;
+}
+
+static int __devexit pcf50633_regulator_remove(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+ regulator_unregister(rdev);
+
+ return 0;
+}
+
+static struct platform_driver pcf50633_regulator_driver = {
+ .driver = {
+ .name = "pcf50633-regltr",
+ },
+ .probe = pcf50633_regulator_probe,
+ .remove = __devexit_p(pcf50633_regulator_remove),
+};
+
+static int __init pcf50633_regulator_init(void)
+{
+ return platform_driver_register(&pcf50633_regulator_driver);
+}
+module_init(pcf50633_regulator_init);
+
+static void __exit pcf50633_regulator_exit(void)
+{
+ platform_driver_unregister(&pcf50633_regulator_driver);
+}
+module_exit(pcf50633_regulator_exit);
+
+MODULE_AUTHOR("Balaji Rao <balajirrao@...nmoko.org>");
+MODULE_DESCRIPTION("PCF50633 regulator driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-regulator");
diff --git a/include/linux/mfd/pcf50633/pmic.h b/include/linux/mfd/pcf50633/pmic.h
new file mode 100644
index 0000000..2d3dbe5
--- /dev/null
+++ b/include/linux/mfd/pcf50633/pmic.h
@@ -0,0 +1,67 @@
+#ifndef __LINUX_MFD_PCF50633_PMIC_H
+#define __LINUX_MFD_PCF50633_PMIC_H
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/platform_device.h>
+
+#define PCF50633_REG_AUTOOUT 0x1a
+#define PCF50633_REG_AUTOENA 0x1b
+#define PCF50633_REG_AUTOCTL 0x1c
+#define PCF50633_REG_AUTOMXC 0x1d
+#define PCF50633_REG_DOWN1OUT 0x1e
+#define PCF50633_REG_DOWN1ENA 0x1f
+#define PCF50633_REG_DOWN1CTL 0x20
+#define PCF50633_REG_DOWN1MXC 0x21
+#define PCF50633_REG_DOWN2OUT 0x22
+#define PCF50633_REG_DOWN2ENA 0x23
+#define PCF50633_REG_DOWN2CTL 0x24
+#define PCF50633_REG_DOWN2MXC 0x25
+#define PCF50633_REG_MEMLDOOUT 0x26
+#define PCF50633_REG_MEMLDOENA 0x27
+#define PCF50633_REG_LDO1OUT 0x2d
+#define PCF50633_REG_LDO1ENA 0x2e
+#define PCF50633_REG_LDO2OUT 0x2f
+#define PCF50633_REG_LDO2ENA 0x30
+#define PCF50633_REG_LDO3OUT 0x31
+#define PCF50633_REG_LDO3ENA 0x32
+#define PCF50633_REG_LDO4OUT 0x33
+#define PCF50633_REG_LDO4ENA 0x34
+#define PCF50633_REG_LDO5OUT 0x35
+#define PCF50633_REG_LDO5ENA 0x36
+#define PCF50633_REG_LDO6OUT 0x37
+#define PCF50633_REG_LDO6ENA 0x38
+#define PCF50633_REG_HCLDOOUT 0x39
+#define PCF50633_REG_HCLDOENA 0x3a
+#define PCF50633_REG_HCLDOOVL 0x40
+
+enum pcf50633_regulator_enable {
+ PCF50633_REGULATOR_ON = 0x01,
+ PCF50633_REGULATOR_ON_GPIO1 = 0x02,
+ PCF50633_REGULATOR_ON_GPIO2 = 0x04,
+ PCF50633_REGULATOR_ON_GPIO3 = 0x08,
+};
+#define PCF50633_REGULATOR_ON_MASK 0x0f
+
+enum pcf50633_regulator_phase {
+ PCF50633_REGULATOR_ACTPH1 = 0x00,
+ PCF50633_REGULATOR_ACTPH2 = 0x10,
+ PCF50633_REGULATOR_ACTPH3 = 0x20,
+ PCF50633_REGULATOR_ACTPH4 = 0x30,
+};
+#define PCF50633_REGULATOR_ACTPH_MASK 0x30
+
+enum pcf50633_regulator_id {
+ PCF50633_REGULATOR_AUTO,
+ PCF50633_REGULATOR_DOWN1,
+ PCF50633_REGULATOR_DOWN2,
+ PCF50633_REGULATOR_LDO1,
+ PCF50633_REGULATOR_LDO2,
+ PCF50633_REGULATOR_LDO3,
+ PCF50633_REGULATOR_LDO4,
+ PCF50633_REGULATOR_LDO5,
+ PCF50633_REGULATOR_LDO6,
+ PCF50633_REGULATOR_HCLDO,
+ PCF50633_REGULATOR_MEMLDO,
+};
+#endif
+
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists