linux-kernel - [PATCH 4/4] i2400m/usb: wrap USB power saving in #ifdef CONFIG

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <0e511f3772ac9887551bec34ee682fa5bf63fb69.1231355768.git.inaky@linux.intel.com>
Date:	Wed,  7 Jan 2009 11:22:22 -0800
From:	Inaky Perez-Gonzalez <inaky@...ux.intel.com>
To:	netdev@...r.kernel.org
Cc:	wimax@...uxwimax.org, greg@...ah.com,
	Randy Dunlap <randy.dunlap@...cle.com>,
	Stephen Rothwell <sfr@...b.auug.org.au>,
	linux-next@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
	linux-wimax@...el.com
Subject: [PATCH 4/4] i2400m/usb: wrap USB power saving in #ifdef CONFIG_PM

Current code was assuming PM was always enabled, which is not
correct. Code which accesses members in the struct usb_device that are
dependant on CONFIG_PM must be protected the same.

Reported by Randy Dunlap from a build error in the linux-next tree on
07/01/2009.

Signed-off-by: Inaky Perez-Gonzalez <inaky@...ux.intel.com>
Cc: Randy Dunlap <randy.dunlap@...cle.com>
---
 drivers/net/wimax/i2400m/usb.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 6d4b65f..c6d9346 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -397,11 +397,13 @@ int i2400mu_probe(struct usb_interface *iface,
 	i2400m->bus_fw_name = I2400MU_FW_FILE_NAME;
 	i2400m->bus_bm_mac_addr_impaired = 0;
 
+#ifdef CONFIG_PM
 	iface->needs_remote_wakeup = 1;		/* autosuspend (15s delay) */
 	device_init_wakeup(dev, 1);
 	usb_autopm_enable(i2400mu->usb_iface);
 	usb_dev->autosuspend_delay = 15 * HZ;
 	usb_dev->autosuspend_disabled = 0;
+#endif
 
 	result = i2400m_setup(i2400m, I2400M_BRI_MAC_REINIT);
 	if (result < 0) {
@@ -493,7 +495,9 @@ int i2400mu_suspend(struct usb_interface *iface, pm_message_t pm_msg)
 	int result = 0;
 	struct device *dev = &iface->dev;
 	struct i2400mu *i2400mu = usb_get_intfdata(iface);
+#ifdef CONFIG_PM
 	struct usb_device *usb_dev = i2400mu->usb_dev;
+#endif
 	struct i2400m *i2400m = &i2400mu->i2400m;
 
 	d_fnstart(3, dev, "(iface %p pm_msg %u)\n", iface, pm_msg.event);
@@ -503,11 +507,13 @@ int i2400mu_suspend(struct usb_interface *iface, pm_message_t pm_msg)
 	atomic_dec(&i2400mu->do_autopm);
 	result = i2400m_cmd_enter_powersave(i2400m);
 	atomic_inc(&i2400mu->do_autopm);
+#ifdef CONFIG_PM
 	if (result < 0 && usb_dev->auto_pm == 0) {
 		/* System suspend, can't fail */
 		dev_err(dev, "failed to suspend, will reset on resume\n");
 		result = 0;
 	}
+#endif
 	if (result < 0)
 		goto error_enter_powersave;
 	i2400mu_notification_release(i2400mu);
-- 
1.5.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/