Port 0 (ohci1394) opened, 2 nodes detected Loaded system.map <1116316> bytes 2 nodes available, local node is: 1 0: ffc0, uuid: ffe31900 7ed82afe 1: ffc1, uuid: 805b0600 55720f01 [LOCAL] kernel buffer at phys 5d3090 len 262144 <5>[ 0.000000] Linux version 2.6.28-07485-g9e42d0c (root@unix) (gcc version 4.3.3 20081217 (prerelease) (Ubuntu 4.3.2-2ubuntu9) ) #8 SMP Thu Jan 8 12:39:28 P ST 2009 <4>[ 0.000000] KERNEL supported cpus: <4>[ 0.000000] Intel GenuineIntel <4>[ 0.000000] AMD AuthenticAMD <4>[ 0.000000] NSC Geode by NSC <4>[ 0.000000] Cyrix CyrixInstead <4>[ 0.000000] Centaur CentaurHauls <4>[ 0.000000] Transmeta GenuineTMx86 <4>[ 0.000000] Transmeta TransmetaCPU <4>[ 0.000000] UMC UMC UMC UMC <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <6>[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) <6>[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable) <6>[ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS) <6>[ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data) <6>[ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS) <6>[ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data) <6>[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) <6>[ 0.000000] DMI 2.4 present. <6>[ 0.000000] last_pfn = 0x3f0ea max_arch_pfn = 0x100000 <6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 <7>[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-d000 <6>[ 0.000000] init_ohci1394_dma: initializing OHCI-1394 at 0c:03.0 <6>[ 0.000000] init_ohci1394_dma: finished initializing OHCI DMA <4>[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) <4>[ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) <4>[ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) <4>[ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309) <4>[ 0.000000] ACPI: FACS 3FEC0000, 0040 <4>[ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) <4>[ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) <4>[ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) <4>[ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) <4>[ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) <4>[ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) <4>[ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) <4>[ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) <4>[ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <5>[ 0.000000] 120MB HIGHMEM available. <5>[ 0.000000] 887MB LOWMEM available. <6>[ 0.000000] mapped low ram: 0 - 377fe000 <6>[ 0.000000] low ram: 00000000 - 377fe000 <6>[ 0.000000] bootmap 00009000 - 0000ff00 <6>[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000] <6>[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] <6>[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] <6>[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] <6>[ 0.000000] #3 [0000100000 - 0000669210] TEXT DATA BSS ==> [0000100000 - 0000669210] <6>[ 0.000000] #4 [000066a000 - 000066d000] INIT_PG_TABLE ==> [000066a000 - 000066d000] <6>[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] <6>[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] <6>[ 0.000000] #7 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] <4>[ 0.000000] Zone PFN ranges: <4>[ 0.000000] DMA 0x00000000 -> 0x00001000 <4>[ 0.000000] Normal 0x00001000 -> 0x000377fe <4>[ 0.000000] HighMem 0x000377fe -> 0x0003f0ea <4>[ 0.000000] Movable zone start PFN for each node <4>[ 0.000000] early_node_map[2] active PFN ranges <4>[ 0.000000] 0: 0x00000000 -> 0x0000009f <4>[ 0.000000] 0: 0x00000100 -> 0x0003f0ea <7>[ 0.000000] On node 0 totalpages: 258185 <7>[ 0.000000] free_area_init_node: node 0, pgdat c053bb40, node_mem_map c1000000 <7>[ 0.000000] DMA zone: 32 pages used for memmap <7>[ 0.000000] DMA zone: 0 pages reserved <7>[ 0.000000] DMA zone: 3967 pages, LIFO batch:0 <7>[ 0.000000] Normal zone: 1744 pages used for memmap <7>[ 0.000000] Normal zone: 221486 pages, LIFO batch:31 <7>[ 0.000000] HighMem zone: 242 pages used for memmap <7>[ 0.000000] HighMem zone: 30714 pages, LIFO batch:7 <6>[ 0.000000] Using APIC driver default <6>[ 0.000000] ACPI: PM-Timer IO Port: 0x408 <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) <6>[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>[ 0.000000] ACPI: IRQ0 used by override. <7>[ 0.000000] ACPI: IRQ2 used by override. <7>[ 0.000000] ACPI: IRQ9 used by override. <4>[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs <6>[ 0.000000] Using ACPI (MADT) for SMP configuration information <6>[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <6>[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs <6>[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 <6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 <6>[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 <6>[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) <6>[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 <6>[ 0.000000] PERCPU: Allocating 40960 bytes of per cpu data <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256167 <5>[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.28-07485-g9e42d0c root=/dev/sda1 vga=790 debug pnpacpi=off pci=routeirq acpi_osi=Darwin audi t=1 selinux=1 ohci1394_dma=early enforcing=0 <6>[ 0.000000] ACPI: Added _OSI(Darwin) <6>[ 0.000000] audit: enabled (after initialization) <6>[ 0.000000] Enabling fast FPU save and restore... done. <6>[ 0.000000] Enabling unmasked SIMD FPU exception support... done. <6>[ 0.000000] Initializing CPU#0 <4>[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) <6>[ 0.000000] Extended CMOS year: 2000 <4>[ 0.000000] TSC: Unable to calibrate against PIT <6>[ 0.000000] TSC: using PMTIMER reference calibration <4>[ 0.000000] Detected 2161.192 MHz processor. <4>[ 0.010000] Console: colour dummy device 80x25 <6>[ 0.010000] console [tty0] enabled <6>[ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.010000] Memory: 1017788k/1033128k available (2967k kernel code, 14592k reserved, 1458k data, 404k init, 123824k highmem) <6>[ 0.010000] virtual kernel memory layout: <6>[ 0.010000] fixmap : 0xfff9e000 - 0xfffff000 ( 388 kB) <6>[ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) <6>[ 0.010000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) <6>[ 0.010000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) <6>[ 0.010000] .init : 0xc055a000 - 0xc05bf000 ( 404 kB) <6>[ 0.010000] .data : 0xc03e5e9e - 0xc05529c4 (1458 kB) <6>[ 0.010000] .text : 0xc0100000 - 0xc03e5e9e (2967 kB) <6>[ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok. <6>[ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <7>[ 0.010000] hpet clockevent registered <6>[ 0.010000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer <6>[ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.38 BogoMIPS (lpj=21611920) <6>[ 0.010000] Security Framework initialized <6>[ 0.010000] SELinux: Initializing. <7>[ 0.010000] SELinux: Starting in permissive mode <6>[ 0.010000] Failure registering Root Plug module with the kernel <4>[ 0.010000] Mount-cache hash table entries: 512 <6>[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K <6>[ 0.010000] CPU: L2 cache: 4096K <6>[ 0.010000] [ds] using core 2 configuration <6>[ 0.010000] CPU: Physical Processor ID: 0 <6>[ 0.010000] CPU: Processor Core ID: 0 <6>[ 0.010000] Intel machine check architecture supported. <6>[ 0.010000] Intel machine check reporting enabled on CPU#0. <6>[ 0.010000] using mwait in idle threads. <6>[ 0.010000] Checking 'hlt' instruction... OK. <6>[ 0.041108] ACPI: Core revision 20080926 <6>[ 0.061495] ftrace: converting mcount calls to 0f 1f 44 00 00 <6>[ 0.061503] ftrace: allocating 15022 entries in 59 pages <7>[ 0.067559] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067569] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067575] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067581] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067587] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067593] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067599] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067604] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067610] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067616] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067622] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067628] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067634] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067640] alloc irq_2_pin on cpu 0 node 0 <7>[ 0.067646] alloc irq_2_pin on cpu 0 node 0 <6>[ 0.067803] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 0.167822] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 <6>[ 0.170000] Testing tracer nop: PASSED <6>[ 0.170000] Booting processor 1 APIC 0x1 ip 0x6000 <6>[ 0.010000] Initializing CPU#1 <6>[ 0.010000] Calibrating delay using timer specific routine.. 4322.51 BogoMIPS (lpj=21612591) <6>[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K <6>[ 0.010000] CPU: L2 cache: 4096K <6>[ 0.010000] [ds] using core 2 configuration <6>[ 0.010000] CPU: Physical Processor ID: 0 <6>[ 0.010000] CPU: Processor Core ID: 1 <6>[ 0.010000] Intel machine check architecture supported. <6>[ 0.010000] Intel machine check reporting enabled on CPU#1. <6>[ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 <6>[ 0.321762] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 <6>[ 0.321798] checking TSC synchronization [CPU#0 -> CPU#1]: passed. <6>[ 0.330032] Brought up 2 CPUs <6>[ 0.330037] Total of 2 processors activated (8644.90 BogoMIPS). <7>[ 0.330105] CPU0 attaching sched-domain: <7>[ 0.330109] domain 0: span 0-1 level MC <7>[ 0.330113] groups: 0 1 <7>[ 0.330120] CPU1 attaching sched-domain: <7>[ 0.330124] domain 0: span 0-1 level MC <7>[ 0.330127] groups: 1 0 <6>[ 0.330215] net_namespace: 800 bytes <6>[ 0.330215] Booting paravirtualized kernel on bare hardware <6>[ 0.330328] NET: Registered protocol family 16 <6>[ 0.330328] EISA bus registered <6>[ 0.330328] ACPI: bus type pci registered <6>[ 0.330328] PCI: Using configuration type 1 for base access <4>[ 0.340108] bio: create slab at 0 <6>[ 0.341226] ACPI: EC: EC description table is found, configuring boot EC <6>[ 0.341477] ACPI: EC: non-query interrupt received, switching to interrupt mode <6>[ 0.355446] ACPI: Interpreter enabled <6>[ 0.355453] ACPI: (supports S0 S3 S4 S5) <6>[ 0.355528] ACPI: Using IOAPIC for interrupt routing <6>[ 0.371513] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 <6>[ 0.371513] ACPI: EC: driver started in interrupt mode <6>[ 0.371513] ACPI: No dock devices found. <6>[ 0.371513] ACPI: PCI Root Bridge [PCI0] (0000:00) <6>[ 0.371513] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold <6>[ 0.371513] pci 0000:00:01.0: PME# disabled <7>[ 0.371513] pci 0000:00:07.0: reg 10 32bit mmio: [0x50404000-0x50404fff] <7>[ 0.371513] pci 0000:00:1b.0: reg 10 64bit mmio: [0x50400000-0x50403fff] <6>[ 0.371513] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold <6>[ 0.371513] pci 0000:00:1b.0: PME# disabled <6>[ 0.371513] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 0.371513] pci 0000:00:1c.0: PME# disabled <6>[ 0.371513] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold <6>[ 0.371513] pci 0000:00:1c.1: PME# disabled <6>[ 0.371513] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold <6>[ 0.371513] pci 0000:00:1c.2: PME# disabled <7>[ 0.371513] pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f] <7>[ 0.371513] pci 0000:00:1d.1: reg 20 io port: [0x4060-0x407f] <7>[ 0.371513] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f] <7>[ 0.371513] pci 0000:00:1d.3: reg 20 io port: [0x4020-0x403f] <7>[ 0.371513] pci 0000:00:1d.7: reg 10 32bit mmio: [0x50405400-0x504057ff] <6>[ 0.371513] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold <6>[ 0.371513] pci 0000:00:1d.7: PME# disabled <6>[ 0.371513] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO <6>[ 0.371513] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO <6>[ 0.371513] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) <6>[ 0.371513] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) <6>[ 0.371513] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) <7>[ 0.371513] pci 0000:00:1f.1: reg 10 io port: [0x40d8-0x40df] <7>[ 0.371513] pci 0000:00:1f.1: reg 14 io port: [0x40ec-0x40ef] <7>[ 0.371513] pci 0000:00:1f.1: reg 18 io port: [0x40d0-0x40d7] <7>[ 0.371513] pci 0000:00:1f.1: reg 1c io port: [0x40e8-0x40eb] <7>[ 0.371513] pci 0000:00:1f.1: reg 20 io port: [0x40b0-0x40bf] <7>[ 0.371513] pci 0000:00:1f.2: reg 10 io port: [0x40c8-0x40cf] <7>[ 0.371513] pci 0000:00:1f.2: reg 14 io port: [0x40e4-0x40e7] <7>[ 0.371513] pci 0000:00:1f.2: reg 18 io port: [0x40c0-0x40c7] <7>[ 0.371513] pci 0000:00:1f.2: reg 1c io port: [0x40e0-0x40e3] <7>[ 0.371513] pci 0000:00:1f.2: reg 20 io port: [0x40a0-0x40af] <7>[ 0.371513] pci 0000:00:1f.2: reg 24 32bit mmio: [0x50405000-0x504053ff] <6>[ 0.371513] pci 0000:00:1f.2: PME# supported from D3hot <6>[ 0.371513] pci 0000:00:1f.2: PME# disabled <7>[ 0.371578] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf] <7>[ 0.371656] pci 0000:01:00.0: reg 10 32bit mmio: [0x40000000-0x47ffffff] <7>[ 0.371666] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] <7>[ 0.371677] pci 0000:01:00.0: reg 18 32bit mmio: [0x50300000-0x5030ffff] <7>[ 0.371699] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] <7>[ 0.371731] pci 0000:01:00.0: supports D1 D2 <7>[ 0.371793] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] <7>[ 0.371798] pci 0000:00:01.0: bridge 32bit mmio: [0x50300000-0x503fffff] <7>[ 0.371806] pci 0000:00:01.0: bridge 64bit mmio pref: [0x40000000-0x47ffffff] <7>[ 0.371888] pci 0000:02:00.0: reg 10 64bit mmio: [0x50200000-0x50203fff] <7>[ 0.371901] pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff] <7>[ 0.371939] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] <7>[ 0.371998] pci 0000:02:00.0: supports D1 D2 <6>[ 0.372001] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 0.372010] pci 0000:02:00.0: PME# disabled <7>[ 0.372077] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] <7>[ 0.372084] pci 0000:00:1c.0: bridge 32bit mmio: [0x50200000-0x502fffff] <7>[ 0.372164] pci 0000:03:00.0: reg 10 64bit mmio: [0x50100000-0x5010ffff] <7>[ 0.372261] pci 0000:03:00.0: supports D1 <6>[ 0.372264] pci 0000:03:00.0: PME# supported from D0 D1 D3hot <6>[ 0.372272] pci 0000:03:00.0: PME# disabled <7>[ 0.372352] pci 0000:00:1c.1: bridge 32bit mmio: [0x50100000-0x501fffff] <7>[ 0.372422] pci 0000:00:1c.2: bridge io port: [0x1000-0x1fff] <7>[ 0.372429] pci 0000:00:1c.2: bridge 32bit mmio: [0x4c100000-0x500fffff] <7>[ 0.372439] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x48000000-0x4bffffff] <7>[ 0.372498] pci 0000:0c:03.0: reg 10 32bit mmio: [0x4c004000-0x4c0047ff] <7>[ 0.372510] pci 0000:0c:03.0: reg 14 32bit mmio: [0x4c000000-0x4c003fff] <7>[ 0.372578] pci 0000:0c:03.0: supports D1 D2 <6>[ 0.372582] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot <6>[ 0.372589] pci 0000:0c:03.0: PME# disabled <6>[ 0.372653] pci 0000:00:1e.0: transparent bridge <7>[ 0.372663] pci 0000:00:1e.0: bridge 32bit mmio: [0x4c000000-0x4c0fffff] <7>[ 0.372701] pci_bus 0000:00: on NUMA node 0 <7>[ 0.372715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>[ 0.381727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] <7>[ 0.382333] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] <7>[ 0.382924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] <7>[ 0.383509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] <7>[ 0.384122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] <6>[ 0.401127] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 <6>[ 0.401127] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) <6>[ 0.401127] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 <6>[ 0.401127] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) <6>[ 0.401401] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. <6>[ 0.401691] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. <6>[ 0.410042] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) <6>[ 0.410328] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) <5>[ 0.410446] SCSI subsystem initialized <7>[ 0.410446] libata version 3.00 loaded. <6>[ 0.410446] usbcore: registered new interface driver usbfs <6>[ 0.410446] usbcore: registered new interface driver hub <6>[ 0.410446] usbcore: registered new device driver usb <6>[ 0.410446] PCI: Using ACPI for IRQ routing <6>[ 0.410446] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified <7>[ 0.410446] alloc irq_2_pin on cpu 0 node 0 <6>[ 0.410446] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <6>[ 0.410446] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.410446] alloc irq_2_pin on cpu 0 node 0 <6>[ 0.410446] pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 <7>[ 0.410446] alloc irq_2_pin on cpu 0 node 0 <6>[ 0.410446] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 <6>[ 0.410446] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.410446] alloc irq_2_pin on cpu 0 node 0 <6>[ 0.410446] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 <7>[ 0.410446] alloc irq_2_pin on cpu 0 node 0 <6>[ 0.410446] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 <7>[ 0.410446] alloc irq_2_pin on cpu 0 node 0 <6>[ 0.410446] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 <6>[ 0.410446] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 <6>[ 0.410446] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 <6>[ 0.410446] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 <6>[ 0.410446] pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 <6>[ 0.410446] pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 <6>[ 0.410446] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 <6>[ 0.410446] vendor=8086 device=27a1 <6>[ 0.410446] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <6>[ 0.410446] vendor=8086 device=27d0 <6>[ 0.410446] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <6>[ 0.410446] vendor=8086 device=27d2 <6>[ 0.410446] pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 <6>[ 0.410446] vendor=8086 device=2448 <6>[ 0.410446] pci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 <6>[ 0.440090] cfg80211: Using static regulatory domain info <6>[ 0.440090] cfg80211: Regulatory domain: US <6>[ 0.440090] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) <6>[ 0.440090] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) <6>[ 0.440090] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) <6>[ 0.440090] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) <6>[ 0.440090] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) <6>[ 0.440090] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) <6>[ 0.440090] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) <6>[ 0.440093] cfg80211: Calling CRDA for country: US <6>[ 0.440122] NetLabel: Initializing <6>[ 0.440122] NetLabel: domain hash size = 128 <6>[ 0.440122] NetLabel: protocols = UNLABELED CIPSOv4 <6>[ 0.440141] NetLabel: unlabeled traffic allowed by default <6>[ 0.440155] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 <6>[ 0.440162] hpet0: 3 comparators, 64-bit 14.318180 MHz counter <6>[ 0.470029] pnp: PnP ACPI: disabled <7>[ 0.501835] Switched to high resolution mode on CPU 1 <6>[ 0.505920] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 <6>[ 0.505927] pci 0000:00:01.0: IO window: 0x3000-0x3fff <6>[ 0.505934] pci 0000:00:01.0: MEM window: 0x50300000-0x503fffff <6>[ 0.505939] pci 0000:00:01.0: PREFETCH window: 0x00000040000000-0x00000047ffffff <6>[ 0.505949] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 <6>[ 0.505955] pci 0000:00:1c.0: IO window: 0x2000-0x2fff <6>[ 0.505963] pci 0000:00:1c.0: MEM window: 0x50200000-0x502fffff <6>[ 0.505970] pci 0000:00:1c.0: PREFETCH window: 0x00000050500000-0x000000505fffff <6>[ 0.505981] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 <6>[ 0.505985] pci 0000:00:1c.1: IO window: disabled <6>[ 0.505993] pci 0000:00:1c.1: MEM window: 0x50100000-0x501fffff <6>[ 0.506000] pci 0000:00:1c.1: PREFETCH window: disabled <6>[ 0.506009] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 <6>[ 0.506015] pci 0000:00:1c.2: IO window: 0x1000-0x1fff <6>[ 0.506023] pci 0000:00:1c.2: MEM window: 0x4c100000-0x500fffff <6>[ 0.506030] pci 0000:00:1c.2: PREFETCH window: 0x00000048000000-0x0000004bffffff <6>[ 0.506041] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c <6>[ 0.506045] pci 0000:00:1e.0: IO window: disabled <6>[ 0.506053] pci 0000:00:1e.0: MEM window: 0x4c000000-0x4c0fffff <6>[ 0.506060] pci 0000:00:1e.0: PREFETCH window: disabled <6>[ 0.506073] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.506080] pci 0000:00:01.0: setting latency timer to 64 <6>[ 0.506087] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 <7>[ 0.506094] pci 0000:00:1c.0: setting latency timer to 64 <6>[ 0.506102] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.506109] pci 0000:00:1c.1: setting latency timer to 64 <6>[ 0.506117] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 <7>[ 0.506124] pci 0000:00:1c.2: setting latency timer to 64 <7>[ 0.510005] Switched to high resolution mode on CPU 0 <6>[ 0.510565] pci 0000:00:1e.0: power state changed by ACPI to D0 <7>[ 0.510575] pci 0000:00:1e.0: setting latency timer to 64 <7>[ 0.510581] pci_bus 0000:00: resource 0 io: [0x00-0xffff] <7>[ 0.510585] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] <7>[ 0.510590] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff] <7>[ 0.510594] pci_bus 0000:01: resource 1 mem: [0x50300000-0x503fffff] <7>[ 0.510598] pci_bus 0000:01: resource 2 mem: [0x40000000-0x47ffffff] <7>[ 0.510602] pci_bus 0000:01: resource 3 mem: [0x0-0x0] <7>[ 0.510606] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] <7>[ 0.510610] pci_bus 0000:02: resource 1 mem: [0x50200000-0x502fffff] <7>[ 0.510614] pci_bus 0000:02: resource 2 mem: [0x50500000-0x505fffff] <7>[ 0.510618] pci_bus 0000:02: resource 3 mem: [0x0-0x0] <7>[ 0.510622] pci_bus 0000:03: resource 0 mem: [0x0-0x0] <7>[ 0.510625] pci_bus 0000:03: resource 1 mem: [0x50100000-0x501fffff] <7>[ 0.510630] pci_bus 0000:03: resource 2 mem: [0x0-0x0] <7>[ 0.510633] pci_bus 0000:03: resource 3 mem: [0x0-0x0] <7>[ 0.510637] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff] <7>[ 0.510641] pci_bus 0000:04: resource 1 mem: [0x4c100000-0x500fffff] <7>[ 0.510645] pci_bus 0000:04: resource 2 mem: [0x48000000-0x4bffffff] <7>[ 0.510649] pci_bus 0000:04: resource 3 mem: [0x0-0x0] <7>[ 0.510653] pci_bus 0000:0c: resource 0 mem: [0x0-0x0] <7>[ 0.510657] pci_bus 0000:0c: resource 1 mem: [0x4c000000-0x4c0fffff] <7>[ 0.510661] pci_bus 0000:0c: resource 2 mem: [0x0-0x0] <7>[ 0.510665] pci_bus 0000:0c: resource 3 io: [0x00-0xffff] <7>[ 0.510669] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffff] <6>[ 0.510703] NET: Registered protocol family 2 <6>[ 0.540086] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.540446] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.540892] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) <6>[ 0.541444] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 0.541448] TCP reno registered <6>[ 0.550162] NET: Registered protocol family 1 <6>[ 0.551235] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 0.553515] Microcode Update Driver: v2.00 , Peter Oruba <4>[ 0.555130] Initializing RT-Tester: OK <6>[ 0.555260] audit: initializing netlink socket (enabled) <5>[ 0.555326] type=2000 audit(1231452424.550:1): initialized <6>[ 0.558603] Testing tracer sched_switch: PASSED <6>[ 0.660046] Testing tracer function: PASSED <6>[ 0.790733] Testing dynamic ftrace: PASSED <6>[ 1.030057] Testing tracer irqsoff: PASSED <6>[ 1.040311] Testing tracer wakeup: PASSED <4>[ 1.370271] highmem bounce pool size: 64 pages <6>[ 1.370280] HugeTLB registered 4 MB page size, pre-allocated 0 pages <6>[ 1.388770] fuse init (API version 7.11) <6>[ 1.389459] msgmni has been set to 1746 <7>[ 1.389725] SELinux: Registering netfilter hooks <6>[ 1.390618] alg: No test for stdrng (krng) <6>[ 1.390637] io scheduler noop registered <6>[ 1.391023] io scheduler cfq registered (default) <7>[ 1.391175] pci 0000:01:00.0: Boot video device <6>[ 1.391859] vesafb: framebuffer at 0x40000000, mapped to 0xf8100000, using 3072k, total 16384k <6>[ 1.391866] vesafb: mode is 1024x768x16, linelength=2048, pages=9 <6>[ 1.391870] vesafb: protected mode interface info at c000:ad0c <6>[ 1.391874] vesafb: pmi: set display start = c00cad94, set palette = c00cae50 <6>[ 1.391878] vesafb: scrolling: redraw <6>[ 1.391882] vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0 <4>[ 1.416203] Console: switching to colour frame buffer device 128x48 <6>[ 1.438376] fb0: VESA VGA frame buffer device <6>[ 1.454068] loop: module loaded <6>[ 1.454220] Linux video capture interface: v2.00 <6>[ 1.454707] input: Macintosh mouse button emulation as /class/input/input0 <4>[ 1.455368] Driver 'sd' needs updating - please use bus_type methods <4>[ 1.455772] Driver 'sr' needs updating - please use bus_type methods <7>[ 1.456457] ata_piix 0000:00:1f.1: version 2.12 <6>[ 1.456763] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 <6>[ 1.457061] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 <7>[ 1.457433] ata_piix 0000:00:1f.1: setting latency timer to 64 <6>[ 1.457800] scsi0 : ata_piix <6>[ 1.458503] scsi1 : ata_piix <6>[ 1.460671] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14 <6>[ 1.460992] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15 <6>[ 1.461330] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 <6>[ 1.461735] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] <7>[ 1.620022] ata_piix 0000:00:1f.2: setting latency timer to 64 <6>[ 1.631577] scsi2 : ata_piix <6>[ 1.639319] scsi3 : ata_piix <6>[ 1.643111] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66 <6>[ 1.658409] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19 <6>[ 1.666169] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19 <6>[ 1.674201] usbcore: registered new interface driver usblcd <6>[ 1.682008] usbcore: registered new interface driver usbled <6>[ 1.683043] ata1.00: configured for UDMA/66 <6>[ 1.698370] PNP: No PS/2 controller found. Probing ports directly. <3>[ 1.707143] i8042.c: No controller found. <5>[ 1.714972] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5 <6>[ 1.723852] mice: PS/2 mouse device common for all mice <6>[ 1.733181] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com <6>[ 1.741522] EDAC MC: Ver: 2.1.0 Jan 8 2009 <6>[ 1.750382] cpuidle: using governor ladder <6>[ 1.758683] cpuidle: using governor menu <4>[ 1.758700] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray <6>[ 1.758704] Uniform CD-ROM driver Revision: 3.20 <7>[ 1.783949] sr 0:0:0:0: Attached scsi CD-ROM sr0 <6>[ 1.786169] usbcore: registered new interface driver hiddev <6>[ 1.786289] usbcore: registered new interface driver usbhid <6>[ 1.786293] usbhid: v2.6:USB HID core driver <6>[ 1.786432] Advanced Linux Sound Architecture Driver Version 1.0.18a. <6>[ 1.786565] ALSA device list: <6>[ 1.786566] No soundcards found. <6>[ 1.786784] oprofile: using NMI interrupt. <6>[ 1.787063] IPVS: Registered protocols (TCP, AH, ESP) <6>[ 1.787249] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) <6>[ 1.787274] IPVS: ipvs loaded. <6>[ 1.787612] Initializing XFRM netlink socket <6>[ 1.787639] NET: Registered protocol family 17 <6>[ 1.787646] NET: Registered protocol family 15 <6>[ 1.787681] Using IPI No-Shortcut mode <5>[ 1.902173] sr 0:0:0:0: Attached scsi generic sg0 type 5 <6>[ 1.925157] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100 <6>[ 1.933027] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) <6>[ 1.970534] ata3.01: configured for UDMA/100 <5>[ 1.978581] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5 <5>[ 1.987177] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) <5>[ 1.995576] sd 2:0:1:0: [sda] Write Protect is off <7>[ 2.003768] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 <5>[ 2.012019] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>[ 2.012055] sd 2:0:1:0: Attached scsi generic sg1 type 0 <4>[ 2.012270] VFS: Cannot open root device "sda1" or unknown-block(0,0) <4>[ 2.012271] Please append a correct "root=" boot option; here are the available partitions: <4>[ 2.012276] 0b00 1048575 sr0 driver: sr <0>[ 2.012279] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)