Linux version 2.6.28-next-20090107-09542-gdbcea38 (laurent@calimero) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #71 SMP PREEMPT Wed Jan 7 19:53:55 CET 2009 KERNEL supported cpus: AMD AuthenticAMD BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bef0000 (usable) BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS) BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data) BIOS-e820: 000000003c000000 - 0000000040000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x3bef0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 377fe000 @ 7000-d000 RAMDISK: 37c00000 - 37fefcf1 Allocated new RAMDISK: 008cc000 - 00cbbcf1 Move RAMDISK from 0000000037c00000 - 0000000037fefcf0 to 008cc000 - 00cbbcf0 ACPI: RSDP 000F6340, 0014 (r0 GBT ) ACPI: RSDT 3BEF3000, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 1010101) ACPI: FACP 3BEF3040, 0074 (r1 GBT NVDAACPI 42302E31 NVDA 1010101) ACPI: DSDT 3BEF30C0, 5272 (r1 GBT NVDAACPI 1000 MSFT 3000000) ACPI: FACS 3BEF1800, 0040 ACPI: SSDT 3BEF8400, 028A (r1 PTLTD POWERNOW 1 LTP 1) ACPI: HPET 3BEF86C0, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 98) ACPI: MCFG 3BEF8700, 003C (r1 GBT NVDAACPI 42302E31 NVDA 1010101) ACPI: APIC 3BEF8340, 008E (r1 GBT NVDAACPI 42302E31 NVDA 1010101) ACPI: Local APIC address 0xfee00000 70MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00009000 - 0000ff00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000200000 - 00008c788c] TEXT DATA BSS ==> [0000200000 - 00008c788c] #4 [00008c8000 - 00008cc000] INIT_PG_TABLE ==> [00008c8000 - 00008cc000] #5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [00008cc000 - 0000cbbcf1] NEW RAMDISK ==> [00008cc000 - 0000cbbcf1] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] found SMP MP-table at [c00f4970] 000f4970 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003bef0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003bef0 On node 0 totalpages: 245391 DMA zone: 52 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3947 pages, LIFO batch:0 Normal zone: 2834 pages used for memmap Normal zone: 220396 pages, LIFO batch:31 HighMem zone: 231 pages used for memmap HighMem zone: 17931 pages, LIFO batch:3 Movable zone: 0 pages used for memmap Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10de8201 base: 0xfeff0000 SMP: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Allocating 32768 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 242274 Kernel command line: root=/dev/mapper/vglinux1-lv_ubuntu2 ro locale=fr_FR vga=795 resume=/dev/mapper/vglinux1-lvswap Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. CPU 0 irqstacks, hard=c04f3000 soft=c04eb000 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 2600.020 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 2335 kB per task-struct memory footprint: 1152 bytes Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 956784k/981952k available (1791k kernel code, 24476k reserved, 895k data, 272k init, 72648k highmem) virtual kernel memory layout: fixmap : 0xfff50000 - 0xfffff000 ( 700 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc04a4000 - 0xc04e8000 ( 272 kB) .data : 0xc03bfc19 - 0xc049fad0 ( 895 kB) .text : 0xc0200000 - 0xc03bfc19 (1791 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.04 BogoMIPS (lpj=10400080) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using C1E aware idle routine Checking 'hlt' instruction... <4>------------[ cut here ]------------ WARNING: at kernel/sched.c:4435 sub_preempt_count+0x7e/0x8f() Hardware name: M68SM-S2L Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.28-next-20090107-09542-gdbcea38 #71 Call Trace: [] warn_slowpath+0x80/0xb6 [] lock_acquire+0x76/0x7e [] _spin_unlock_irq+0x20/0x51 [] trace_hardirqs_on_caller+0xf8/0x12e [] _spin_unlock_irq+0x28/0x51 [] _spin_unlock_irq+0x45/0x51 [] run_timer_softirq+0x178/0x180 [] run_rebalance_domains+0x27/0x8f [] trace_hardirqs_off_caller+0x2c/0x87 [] sub_preempt_count+0x7e/0x8f [] handle_level_irq+0x0/0x9d [] irq_exit+0x43/0x87 [] do_IRQ+0xec/0x102 [] common_interrupt+0x2c/0x34 [] native_safe_halt+0x2/0x3 [] check_bugs+0x9f/0xd8 [] start_kernel+0x2f9/0x306 ---[ end trace 4eaa2a86a8e2da22 ]--- OK. ACPI: Core revision 20081031 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02 lockdep: fixing up alternatives. CPU 1 irqstacks, hard=c04f4000 soft=c04ec000 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5200.00 BogoMIPS (lpj=10400015) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02 Brought up 2 CPUs Total of 2 processors activated (10400.04 BogoMIPS). khelper used greatest stack depth: 3316 bytes left net_namespace: 848 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 khelper used greatest stack depth: 3108 bytes left ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.1: reg 10 io port: [0xc800-0xc83f] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xf700a000-0xf700afff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xf700b000-0xf700b0ff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:04.0: reg 10 32bit mmio: [0xf700c000-0xf700cfff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:04.1: reg 10 32bit mmio: [0xf7009000-0xf70090ff] pci 0000:00:04.1: supports D1 D2 pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.1: PME# disabled pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] pci 0000:00:07.0: reg 10 32bit mmio: [0xf7000000-0xf7003fff] pci 0000:00:07.0: PME# supported from D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:09.0: reg 10 io port: [0x9f0-0x9f7] pci 0000:00:09.0: reg 14 io port: [0xbf0-0xbf3] pci 0000:00:09.0: reg 18 io port: [0x970-0x977] pci 0000:00:09.0: reg 1c io port: [0xb70-0xb73] pci 0000:00:09.0: reg 20 io port: [0xdc00-0xdc0f] pci 0000:00:09.0: reg 24 32bit mmio: [0xf7004000-0xf7005fff] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7006000-0xf7006fff] pci 0000:00:0a.0: reg 14 io port: [0xe000-0xe007] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf7007000-0xf70070ff] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf7008000-0xf700800f] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:12.0: reg 10 32bit mmio: [0xf2000000-0xf2ffffff] pci 0000:00:12.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] pci 0000:00:12.0: reg 1c 64bit mmio: [0xf5000000-0xf5ffffff] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:07.0: reg 10 io port: [0xa000-0xa007] pci 0000:01:07.0: reg 14 io port: [0xa400-0xa403] pci 0000:01:07.0: reg 18 io port: [0xa800-0xa807] pci 0000:01:07.0: reg 1c io port: [0xac00-0xac03] pci 0000:01:07.0: reg 20 io port: [0xb000-0xb00f] pci 0000:01:07.0: reg 24 32bit mmio: [0xf4000000-0xf40000ff] pci 0000:01:07.0: reg 30 32bit mmio: [0x000000-0x07ffff] pci 0000:01:07.0: supports D1 D2 pci 0000:00:08.0: transparent bridge pci 0000:00:08.0: bridge io port: [0xa000-0xbfff] pci 0000:00:08.0: bridge 32bit mmio: [0xf3000000-0xf4ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LU2B] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x1000-0x107f has been reserved system 00:01: ioport range 0x1080-0x10ff has been reserved system 00:01: ioport range 0x1400-0x147f has been reserved system 00:01: ioport range 0x1480-0x14ff has been reserved system 00:01: ioport range 0x1800-0x187f has been reserved system 00:01: ioport range 0x1880-0x18ff has been reserved system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved system 00:01: iomem range 0x3c000000-0x3fffffff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x87f has been reserved system 00:02: ioport range 0x295-0x314 has been reserved system 00:02: ioport range 0x290-0x294 has been reserved system 00:0c: iomem range 0xf0000000-0xf1ffffff has been reserved system 00:0d: iomem range 0xd4600-0xd7fff has been reserved system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved system 00:0d: iomem range 0xfc000-0xfffff could not be reserved system 00:0d: iomem range 0x3bef0000-0x3befffff could not be reserved system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0x100000-0x3beeffff could not be reserved system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 pci 0000:00:08.0: IO window: 0xa000-0xbfff pci 0000:00:08.0: MEM window: 0xf3000000-0xf4ffffff pci 0000:00:08.0: PREFETCH window: 0x00000050000000-0x000000500fffff pci 0000:00:08.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0xa000-0xbfff] pci_bus 0000:01: resource 1 mem: [0xf3000000-0xf4ffffff] pci_bus 0000:01: resource 2 mem: [0x50000000-0x500fffff] pci_bus 0000:01: resource 3 io: [0x00-0xffff] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 4031k freed highmem bounce pool size: 64 pages msgmni has been set to 1735 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:07.0: Enabling HT MSI Mapping pci 0000:00:08.0: Enabling HT MSI Mapping pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0a.0: Enabling HT MSI Mapping pci 0000:00:12.0: Boot video device vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 10240k, total 65536k vesafb: mode is 1280x1024x32, linelength=5120, pages=0 vesafb: protected mode interface info at c000:cfb0 vesafb: pmi: set display start = c00ccfe6, set palette = c00cd050 vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device Linux agpgart interface v0.103 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 3 devices found Freeing unused kernel memory: 272k freed Write protecting the kernel text: 1792k Write protecting the kernel read-only data: 724k mkdir used greatest stack depth: 2944 bytes left mkdir used greatest stack depth: 2940 bytes left all_generic_ide used greatest stack depth: 2756 bytes left input: AT Translated Set 2 keyboard as /class/input/input0 setfont used greatest stack depth: 2688 bytes left device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com SCSI subsystem initialized libata version 3.00 loaded. pata_amd 0000:00:06.0: version 0.3.10 pata_amd 0000:00:06.0: setting latency timer to 64 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata1.00: HPA unlocked: 78163247 -> 78165360, native 78165360 ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100 ata1.00: 78165360 sectors, multi 16: LBA ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL05, max UDMA/33 ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x1f) ata1: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x1f) ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/33 ata2: port disabled. ignoring. scsi 0:0:0:0: Direct-Access ATA ST340016A 3.75 PQ: 0 ANSI: 5 scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4165B DL05 PQ: 0 ANSI: 5 modprobe used greatest stack depth: 2548 bytes left pata_sil680 0000:01:07.0: version 0.4.8 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 vendor=10de device=0561 alloc irq_desc for 17 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 alloc irq_cfg on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 pata_sil680 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 sil680: 133MHz clock. scsi2 : pata_sil680 scsi3 : pata_sil680 ata3: PATA max UDMA/133 cmd 0xa000 ctl 0xa400 bmdma 0xb000 irq 17 ata4: PATA max UDMA/133 cmd 0xa800 ctl 0xac00 bmdma 0xb008 irq 17 ata3.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 ata3.01: 160086528 sectors, multi 16: LBA ata3.01: configured for UDMA/133 ata4.01: ATA-7: MAXTOR STM3802110A, 3.AAJ, max UDMA/100 ata4.01: 156301488 sectors, multi 16: LBA48 ata4.01: configured for UDMA/100 scsi 2:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 scsi 3:0:1:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5 modprobe used greatest stack depth: 2540 bytes left Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk sd 2:0:1:0: [sdb] 160086528 512-byte hardware sectors: (81.9 GB/76.3 GiB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:1:0: [sdb] 160086528 512-byte hardware sectors: (81.9 GB/76.3 GiB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 < sdb5 sdb6 > sd 2:0:1:0: [sdb] Attached SCSI disk sd 3:0:1:0: [sdc] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 3:0:1:0: [sdc] Write Protect is off sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:1:0: [sdc] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 3:0:1:0: [sdc] Write Protect is off sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 < sdc5 > sd 3:0:1:0: [sdc] Attached SCSI disk modprobe used greatest stack depth: 2524 bytes left Loading Reiser4. See www.namesys.com for a description of Reiser4. processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 scsi_id used greatest stack depth: 2488 bytes left udevd used greatest stack depth: 2396 bytes left md: md0 stopped. md: bind md: md127 stopped. md: bind md: bind raid1: raid set md127 active with 2 out of 2 mirrors mdadm used greatest stack depth: 2248 bytes left md127: unknown partition table md: md0 stopped. md: unbind md: export_rdev(sdc1) md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors md0: PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. grep used greatest stack depth: 1984 bytes left loadkeys used greatest stack depth: 1880 bytes left udevd version 124 started input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A usbcore: registered new device driver usb forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 alloc irq_desc for 23 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 alloc irq_cfg on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 forcedeth 0000:00:0a.0: setting latency timer to 64 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver input: PC Speaker as /class/input/input3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:d0:53:49:ae forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 k8temp 0000:00:18.3: Temperature readouts might be wrong - check errata #141 ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 22 alloc irq_desc for 22 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 alloc irq_cfg on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 22, io mem 0xf700a000 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:1:0: Attached scsi generic sg1 type 5 sd 2:0:1:0: Attached scsi generic sg2 type 0 sd 3:0:1:0: Attached scsi generic sg3 type 0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 21 alloc irq_desc for 21 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 alloc irq_cfg on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 21, io mem 0xf700b000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected ahci 0000:00:09.0: version 3.0 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 alloc irq_desc for 20 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 alloc irq_cfg on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 alloc irq_desc for 24 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 alloc irq_cfg on cpu 0 node 0 ahci 0000:00:09.0: irq 24 for MSI/MSI-X ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio ahci 0000:00:09.0: setting latency timer to 64 scsi4 : ahci scsi5 : ahci scsi6 : ahci scsi7 : ahci ata5: SATA max UDMA/133 abar m8192@0xf7004000 port 0xf7004100 irq 24 ata6: SATA max UDMA/133 abar m8192@0xf7004000 port 0xf7004180 irq 24 ata7: SATA max UDMA/133 abar m8192@0xf7004000 port 0xf7004200 irq 24 ata8: SATA max UDMA/133 abar m8192@0xf7004000 port 0xf7004280 irq 24 ata5: SATA link down (SStatus 0 SControl 300) usb 1-5: new low speed USB device using ohci_hcd and address 2 usb 1-5: configuration #1 chosen from 1 choice ata6: SATA link down (SStatus 0 SControl 300) ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 23 ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 23 (level, low) -> IRQ 23 ohci_hcd 0000:00:04.0: setting latency timer to 64 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:04.0: irq 23, io mem 0xf700c000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 5 ports detected ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 22 ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:04.1: setting latency timer to 64 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:04.1: debug port 1 ehci_hcd 0000:00:04.1: cache line size of 64 is not supported ehci_hcd 0000:00:04.1: irq 22, io mem 0xf7009000 ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:07.0: setting latency timer to 64 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 input: PS/2+USB Mouse as /class/input/input4 generic-usb 0003:04F3:0210.0001: input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-5/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 4-2: new high speed USB device using ehci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice hub 4-2:1.0: USB hub found hub 4-2:1.0: 4 ports detected it87: Found IT8716F chip at 0x290, revision 3 EXT3 FS on dm-5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: dm-0: found reiserfs format "3.6" with standard journal ReiserFS: dm-0: using ordered data mode ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-0: checking transaction log (dm-0) ReiserFS: dm-0: Using r5 hash to sort names reiser4: dm-4: found disk format 4.0.0. reiser4: dm-3: found disk format 4.0.0. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: sda6: found reiserfs format "3.6" with standard journal ReiserFS: sda6: using ordered data mode ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda6: checking transaction log (sda6) ReiserFS: sda6: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k alloc irq_desc for 25 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 alloc irq_cfg on cpu 0 node 0 forcedeth 0000:00:0a.0: irq 25 for MSI/MSI-X eth0: no link during initialization. NET: Registered protocol family 17 eth0: link up. NET: Registered protocol family 10 ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged! powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0xa powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xc powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xe powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x10 powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 lp0: using parport0 (interrupt-driven). Clocksource tsc unstable (delta = -210538282 ns) ttyS1: LSR safety check engaged! eth0: no IPv6 routers present landscape-sysin used greatest stack depth: 1828 bytes left warning: `pulseaudio' uses 32-bit capabilities (legacy support in use) syncevolution used greatest stack depth: 1176 bytes left