Message-ID: <4966FC89.8040006@cosmosbay.com>
Date:	Fri, 09 Jan 2009 08:28:09 +0100
From:	Eric Dumazet <dada1@...mosbay.com>
To:	Willy Tarreau <w@....eu>
CC:	David Miller <davem@...emloft.net>, ben@...s.com,
	jarkao2@...il.com, mingo@...e.hu, linux-kernel@...r.kernel.org,
	netdev@...r.kernel.org, jens.axboe@...cle.com
Subject: Re: [PATCH] tcp: splice as many packets as possible at once

Willy Tarreau a écrit :
> On Fri, Jan 09, 2009 at 07:47:16AM +0100, Eric Dumazet wrote:
>>> I'm not applying this until someone explains to me why
>>> we should remove this test from the splice receive but
>>> keep it in the tcp_recvmsg() code where it has been
>>> essentially forever.
>> I found this patch usefull in my testings, but had a feeling something
>> was not complete. If the goal is to reduce number of splice() calls,
>> we also should reduce number of wakeups. If splice() is used in non
>> blocking mode, nothing we can do here of course, since the application
>> will use a poll()/select()/epoll() event before calling splice(). A
>> good setting of SO_RCVLOWAT to (16*PAGE_SIZE)/2 might improve things.
>>
>> I tested this on current tree and it is not working : we still have
>> one wakeup for each frame (ethernet link is a 100 Mb/s one)
> 
> Well, it simply means that data are not coming in fast enough compared to
> the tiny amount of work you have to perform to forward them, there's nothing
> wrong with that. It is important in my opinion not to wait for *enough* data
> to come in, otherwise it might become impossible to forward small chunks.
> I mean, if there are only 300 bytes left to forward, we must not wait
> indefinitely for more data to come, we must forward those 300 bytes.
> 
> In your case below, it simply means that the performance improvement brought
> by splice will be really minor because you'll just avoid 2 memory copies,
> which are ridiculously cheap at 100 Mbps. If you would change your program
> to use recv/send, you would observe the exact same pattern, because as soon
> as poll() wakes you up, you still only have one frame in the system buffers.
> On a small machine I have here (geode 500 MHz), I easily have multiple
> frames queued at 100 Mbps because when epoll() wakes me up, I have traffic
> on something like 10-100 sockets, and by the time I process the first ones,
> the later have time to queue up more data.

My point is to use Gigabit links or 10Gb links and hundred or thousand of flows :)

But if it doesnt work on a single flow, it wont work on many :)

I tried my test program with a Gb link, one flow, and got splice() calls returns 23000 bytes
in average, using a litle too much of CPU : If poll() could wait a litle bit more, CPU
could be available for other tasks.

If the application uses setsockopt(sock, SOL_SOCKET, SO_RCVLOWAT, [32768], 4), it
would be good if kernel was smart enough and could reduce number of wakeups.

(Next blocking point is the fixed limit of 16 pages per pipe, but thats another story)

> 
>> About tcp_recvmsg(), we might also remove the "!timeo" test as well,
>> more testings are needed.
> 
> No right now we can't (we must move it somewhere else at least). Because
> once at least one byte has been received (copied != 0), no other check
> will break out of the loop (or at least I have not found it).
> 

Of course we cant remove the test totally, but change the logic so that several skb
might be used/consumed per tcp_recvmsg() call, like your patch did for splice()

Lets focus on functional changes, not on implementation details :)


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists