| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <alpine.LFD.2.00.0901091731540.20020@localhost.localdomain>
Date: Fri, 09 Jan 2009 17:34:08 -0500 (EST)
From: Len Brown <lenb@...nel.org>
To: Matthew Garrett <mjg59@...f.ucam.org>
Cc: "Brian S. Julin" <bri@...ij.org>, linux-acpi@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
greg@...ah.com
From: Matthew Garrett <mjg59@...f.ucam.org>
Matthew,
Here is the version in my tree -- refreshed to live in
drivers/platform/x86/.
cheers,
-Len
oqo-wmi provides a WMI-based interface to backlight and rfkill control on
model 2 OQO devices. It was originally written by Brian Julin
(<bri@...ij.org>) - I've ported it to the rfkill layer and tidied it up a
little.
Signed-off-by: Matthew Garrett <mjg@...hat.com>
Signed-off-by: Len Brown <len.brown@...el.com>
---
MAINTAINERS | 5 +
drivers/platform/x86/Kconfig | 13 +
drivers/platform/x86/Makefile | 1 +
drivers/platform/x86/oqo-wmi.c | 941 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 960 insertions(+), 0 deletions(-)
create mode 100644 drivers/platform/x86/oqo-wmi.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 57e0309..fef4adb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3239,6 +3239,11 @@ M: robert.richter@....com
L: oprofile-list@...ts.sf.net
S: Maintained
+OQO WMI EXTRAS DRIVER
+P: Matthew Garrett
+M: mjg59@...f.ucam.org
+S: Maintained
+
ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
P: Mark Fasheh
M: mfasheh@...e.com
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 9e8f948..017fb81 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -132,6 +132,19 @@ config MSI_LAPTOP
If you have an MSI S270 laptop, say Y or M here.
+config OQO_WMI
+ tristate "OQO WMI extras"
+ depends on ACPI_WMI
+ depends on INPUT
+ depends on RFKILL
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to support rfkill and backlight control on
+ series 2 OQO handheld devices.
+
+ To compile this driver as a module, choose M here: the module will
+ be called oqo-wmi.
+
config PANASONIC_LAPTOP
tristate "Panasonic Laptop Extras"
depends on INPUT && ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index e290651..37ac07f 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
obj-$(CONFIG_FUJITSU_LAPTOP) += fujitsu-laptop.o
+obj-$(CONFIG_OQO_WMI) += oqo-wmi.o
obj-$(CONFIG_PANASONIC_LAPTOP) += panasonic-laptop.o
obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
obj-$(CONFIG_ACPI_WMI) += wmi.o
diff --git a/drivers/platform/x86/oqo-wmi.c b/drivers/platform/x86/oqo-wmi.c
new file mode 100644
index 0000000..940e605
--- /dev/null
+++ b/drivers/platform/x86/oqo-wmi.c
@@ -0,0 +1,941 @@
+/*
+ * OQO WMI UPMC Extras
+ *
+ * Copyright (C) 2008 Brian S. Julin <bri@...ij.org>
+ *
+ * Based on acer-wmi:
+ * Copyright (C) 2007-2008 Carlos Corbacho <cathectic@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * NOTE: You need to turn SMI on in BIOS (if dmidecode works, you already have)
+ * NOTE: acpi-wmi support mandatory
+ * NOTE: backlight and inputdev support a must, ifdefs will come later
+ */
+
+/*
+ *
+ * 0.3: added WLAN enable switch, restore settings on unload,
+ * resume/suspend handling
+ * 0.2: Still not production-ready, but added ambient light sensor,
+ * backlight, and it prints the unit serial number to dmesg (do
+ * not know where to make that available to userspace yet.)
+ * 0.1: This is a first cut. Plan to reboot after playing with this.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/dmi.h>
+#include <linux/backlight.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/i8042.h>
+#include <linux/input-polldev.h>
+#include <linux/rfkill.h>
+
+#include <acpi/acpi_drivers.h>
+
+MODULE_AUTHOR("Brian Julin");
+MODULE_DESCRIPTION("OQO UPMC WMI Extras Driver");
+MODULE_LICENSE("GPL");
+
+#define OQO_LOGPREFIX "oqo-wmi: "
+#define OQO_ERR KERN_ERR OQO_LOGPREFIX
+#define OQO_NOTICE KERN_NOTICE OQO_LOGPREFIX
+#define OQO_INFO KERN_INFO OQO_LOGPREFIX
+
+#define OQO_KINE_MAXTRY 3
+
+/* Store defined devices globally since we only have one instance. */
+static struct platform_device *oqo_platform_device;
+static struct backlight_device *oqo_backlight_device;
+static struct rfkill *oqo_rfkill;
+static struct input_dev *oqo_kine;
+static struct input_polled_dev *oqo_kine_polled;
+
+/* Likewise store current and original settings globally. */
+struct oqo_settings {
+ int lid_wakes; /* not sure if ACPI handles/needs help here */
+ int kine_itvl;
+ int bl_bright;
+};
+
+static struct oqo_settings orig, curr;
+
+/* Some of this code is left like in acer-wmi so we can add the older
+ Model 01 and any future models more easily, but we should not expect
+ it to be as complicated as Acer given each model is a leap rather than
+ a subtle variant on the last, so we aren't using "quirks" perse. Not
+ sure if there is any real difference for our purposes between the o2
+ and e2.
+*/
+struct oqo_model {
+ const char *model;
+ u16 model_subs;
+};
+#define MODEL_SUB_OQO_O2_SMB0 3
+
+static struct oqo_model oqo_models[] = {
+ {
+ .model = "Model 2",
+ .model_subs = MODEL_SUB_OQO_O2_SMB0,
+ },
+ {}
+};
+
+static struct oqo_model *model;
+
+static int force;
+module_param(force, bool, 0644);
+MODULE_PARM_DESC(force, "Force WMI detection even if DMI detection failed");
+
+/*
+ * OQO Model 2 SMBUS registers
+ * We are just using WMI to read the Cx700 smbus, to share the
+ * ACPI mutex (what may also eventually work in VMs/win32)
+ * Using i2c-viapro directly could interfere with PM.
+ */
+
+#define OQO_O2_SMB0_WWAN_DSBL_ADDR 0x19
+#define OQO_O2_SMB0_WWAN_DSBL_MASK 0x02
+#define OQO_O2_SMB0_LUMIN_LO 0x20
+#define OQO_O2_SMB0_LUMIN_HI 0x21
+#define OQO_O2_SMB0_BL_LO 0x26
+#define OQO_O2_SMB0_BL_HI 0x27
+#define OQO_O2_SMB0_ACCEL_POLL_ITVL 0x45
+#define OQO_O2_SMB0_ACCEL_XLO 0x50
+#define OQO_O2_SMB0_ACCEL_XHI 0x51
+#define OQO_O2_SMB0_ACCEL_YLO 0x52
+#define OQO_O2_SMB0_ACCEL_YHI 0x53
+#define OQO_O2_SMB0_ACCEL_ZLO 0x54
+#define OQO_O2_SMB0_ACCEL_ZHI 0x55
+/* These may be handled by ACPI not sure yet. */
+#define OQO_O2_SMB0_LID_WAKES_ADDR 0x58
+#define OQO_O2_SMB0_LID_WAKES_MASK 0x08
+
+#define OQO_O2_SMB0_SERIAL_START 0x70
+#define OQO_O2_SMB0_SERIAL_LEN 11
+
+static char oqo_sn[OQO_O2_SMB0_SERIAL_LEN + 1];
+
+/* Other addresses I have noticed used on the 02 SMBUS (from DSDT and whatnot)
+ *
+ * These are not used because the linux ACPI drivers work fine on them
+ *
+ * 0x0A -- processor sleep mode?
+ * 0x0C -- ACPI events, probably clears when read.
+ * 0x30 -- thermal zone
+ * There is something going on at 0x31 through 0x34 which is likely
+ * also thermal. The values change over time. Have not figured that
+ * out yet.
+ * 0x41 -- AC detect
+ * 0x42 -- LID button ACTUALLY THIS DOES NOT WORK AND NEEDS TO BE FIXED
+ * 0xa0 and 0xa1 -- battery something (presence? state?)
+ * 0xa4 to 0xcf -- battery info (0xc8-0xca contains "OQO")
+ * 0xd4 to 0xef -- other battery stats
+ */
+
+/*
+ * OQO method GUIDs
+ */
+#define OQO_O2_AMW0_GUID "ABBC0F6D-8EA1-11D1-00A0-C90629100000"
+MODULE_ALIAS("wmi:ABBC0F6D-8EA1-11D1-00A0-C90629100000");
+
+/*
+ * Interface type flags
+ */
+enum interface_type {
+ OQO_O2_AMW0,
+};
+
+/* Each low-level interface must define at least some of the following */
+struct wmi_interface {
+ /* The WMI device type */
+ u32 type;
+};
+
+static struct wmi_interface AMW0_interface = {
+ .type = OQO_O2_AMW0,
+};
+
+/* The detected/chosen interface */
+static struct wmi_interface *interface;
+
+static int dmi_matched(const struct dmi_system_id *dmi)
+{
+ model = dmi->driver_data;
+ /*
+ * Detect which ACPI-WMI interface we're using.
+ */
+ if (wmi_has_guid(OQO_O2_AMW0_GUID))
+ interface = &AMW0_interface;
+
+ return 0;
+}
+
+static struct dmi_system_id oqo_dmis[] = {
+ {
+ .callback = dmi_matched,
+ .ident = "OQO 02",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "OQO Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OQO Model 2"),
+ },
+ .driver_data = oqo_models + 0,
+ },
+ {}
+};
+
+/*
+ * AMW0 (V1) interface on OQO Model 2
+ *
+ * wmba: has four functions selected by int arg 1. arg2 is 3 byte buffer.
+ * 1: performs GETB method on the SMBUS using bytes 0, 1 of Arg2
+ * returns a buffer object containing a single byte
+ * 2: performs SETB on SMBUS using bytes 0, 1, 2 of Arg2
+ * returns 0 as int.
+ * 3: dumps 256 values into a given SMBUS register (not used here)
+ * returns 0 as int.
+ * 4: puts byte 0 of arg2 into some sort of busy flag. Some ACPI
+ * funcs check this (==0) to decide if SMBUS operations are safe.
+ * returns 0 as int.
+ * wmbb: simply returns the busy flag set by wmba #4
+ */
+static acpi_status oqo_smbus_getb(u8 addr, u8 *result)
+{
+ struct acpi_buffer input, res;
+ acpi_status status;
+ union acpi_object *obj;
+ u32 arg2;
+
+ input.length = 4;
+ input.pointer = &arg2;
+ res.length = ACPI_ALLOCATE_BUFFER;
+ res.pointer = NULL;
+
+ arg2 = addr;
+ arg2 <<= 8;
+ arg2 |= 0x12; /* HOSTCMD */
+
+ status = wmi_evaluate_method(OQO_O2_AMW0_GUID, 1, 1, &input, &res);
+
+ if (status != AE_OK)
+ return status;
+
+ obj = (union acpi_object *)res.pointer;
+ if (!obj)
+ return AE_NULL_OBJECT;
+
+ if (obj->type != ACPI_TYPE_BUFFER
+ || obj->buffer.length != 1 || obj->buffer.pointer == NULL) {
+ kfree(obj);
+ return AE_TYPE;
+ }
+ *result = ((u8 *) (obj->buffer.pointer))[0];
+ kfree(obj);
+ return status;
+}
+
+static acpi_status oqo_smbus_setb(u8 addr, u8 val)
+{
+ struct acpi_buffer input, res;
+ acpi_status status;
+ union acpi_object *obj;
+ u32 arg2;
+
+ input.length = 4;
+ input.pointer = &arg2;
+ res.length = ACPI_ALLOCATE_BUFFER;
+ res.pointer = NULL;
+
+ arg2 = val;
+ arg2 <<= 8;
+ arg2 |= addr;
+ arg2 <<= 8;
+ arg2 |= 0x12; /* HOSTCMD */
+
+ status = wmi_evaluate_method(OQO_O2_AMW0_GUID, 1, 2, &input, &res);
+
+ if (status != AE_OK)
+ return status;
+
+ obj = (union acpi_object *)res.pointer;
+ if (!obj)
+ return AE_NULL_OBJECT;
+
+ if (obj->type != ACPI_TYPE_INTEGER) {
+ kfree(obj);
+ return AE_TYPE;
+ }
+ kfree(obj);
+ return status;
+}
+
+/*
+ * We assume we are the only one using this ...ahem... "lock" on
+ * the SMBUS because it would be pathetically noneffective otherwise.
+ *
+ * Nonzero silly_lock will keep certain ACPI routines away from the
+ * SMBUS (if they aren't already on it when you call it.) Zero
+ * silly_lock will let them back on
+ *
+ * This is probably useful before sleeping the system, and one
+ * waits until any ACPI funcs would have long finished before
+ * proceeding. It seems harmless enough and will work to wrap
+ * more accesses with it.
+ */
+static acpi_status oqo_lock_smbus(int silly_lock)
+{
+ struct acpi_buffer input, res;
+ acpi_status status;
+ union acpi_object *obj;
+ u32 arg2;
+
+ input.length = 4;
+ input.pointer = &arg2;
+ res.length = ACPI_ALLOCATE_BUFFER;
+ res.pointer = NULL;
+
+ arg2 = !!silly_lock;
+
+ status = wmi_evaluate_method(OQO_O2_AMW0_GUID, 1, 4, &input, &res);
+
+ if (status != AE_OK)
+ return status;
+
+ obj = (union acpi_object *)res.pointer;
+ if (!obj)
+ return AE_NULL_OBJECT;
+
+ if (obj->type != ACPI_TYPE_INTEGER) {
+ kfree(obj);
+ return AE_TYPE;
+ }
+ kfree(obj);
+ return status;
+}
+
+static int smread_s16(u8 hi_addr, u8 lo_addr)
+{
+ s16 ret = -1;
+ acpi_status status;
+ u8 r;
+
+ /* Keep some ACPI routines off the SMBUS */
+ status = oqo_lock_smbus(1);
+ if (ACPI_FAILURE(status))
+ goto skip;
+
+ status = oqo_smbus_getb(hi_addr, &r);
+ if (ACPI_FAILURE(status))
+ goto skip;
+
+ ret = r;
+ ret <<= 8;
+
+ status = oqo_smbus_getb(lo_addr, &r);
+ if (ACPI_FAILURE(status)) {
+ ret = -1;
+ goto skip;
+ }
+
+ ret |= r;
+ ret &= 0x7fff;
+skip:
+ /* Let ACPI routines back on the SMBUS */
+ status = oqo_lock_smbus(0);
+ if (ACPI_FAILURE(status))
+ return -1;
+ return (int)ret;
+}
+
+static int smwrite_s16(u8 hi_addr, u8 lo_addr, s16 val)
+{
+ acpi_status status;
+ u8 r;
+ int ret = -1;
+
+ status = oqo_lock_smbus(1);
+ if (ACPI_FAILURE(status))
+ goto skip;
+
+ r = (val >> 8) & 0x7f;
+ status = oqo_smbus_setb(hi_addr, r);
+ if (ACPI_FAILURE(status))
+ goto skip;
+
+ r = val & 0xff;
+ status = oqo_smbus_setb(lo_addr, r);
+ if (ACPI_FAILURE(status))
+ goto skip;
+
+ ret = 0;
+skip:
+ status = oqo_lock_smbus(0);
+ if (ACPI_FAILURE(status))
+ return -1;
+ return ret;
+}
+
+static int smread_u8(u8 addr)
+{
+ int ret = -1;
+ acpi_status status;
+ u8 r;
+
+ status = oqo_lock_smbus(1);
+ if (ACPI_FAILURE(status))
+ goto skip;
+
+ status = oqo_smbus_getb(addr, &r);
+ if (ACPI_FAILURE(status))
+ goto skip;
+
+ ret = r;
+skip:
+ status = oqo_lock_smbus(0);
+ if (ACPI_FAILURE(status))
+ return -1;
+ return (int)ret;
+}
+
+static int smwrite_u8(u8 addr, u8 val)
+{
+ acpi_status status;
+ int ret = -1;
+
+ status = oqo_lock_smbus(1);
+ if (ACPI_FAILURE(status))
+ goto skip;
+
+ status = oqo_smbus_setb(addr, val);
+ if (ACPI_FAILURE(status))
+ goto skip;
+
+ ret = 0;
+skip:
+ status = oqo_lock_smbus(0);
+ if (ACPI_FAILURE(status))
+ return -1;
+ return ret;
+}
+
+/*
+ * Accelerometer inputdev
+ */
+
+/*
+ * Get a reading of the accelerometer from the firwmware and push
+ * it to an inputdev.
+ *
+ * Also the ambient light detector hitch-hikes on the inputdev, since
+ * it could be useful in some of the same applications for accelerometers.
+ *
+ * Available information and a bit of poking have not found a
+ * way to freeze a snapshot of the accelerometer data, so we have
+ * to do consistency checks to reduce the odds that we mix low
+ * and high bytes from different updates.
+ *
+ * Unfortunately SMBUS access is very slow (11ms) and the firmware API
+ * does not provide 2-byte transfers, so mixed readings happen and
+ * have to be corrected a lot. (Do not know why; it should be a
+ * multi-kHz.. bus and the reads take only a hundred-ish cycles/byte.
+ * It is not the ACPI function -- it is slow on i2c-viapro as well.)
+ *
+ * Since there is such a big time lag between readings, the axis
+ * are decoupled and reported separately on different timelines as
+ * different events rather than as a set.
+ */
+static acpi_status oqo_read_kine(int *good, s16 *x, s16 *y, s16 *z,
+ u16 *lumin)
+{
+ u8 hiregs[4] = { OQO_O2_SMB0_ACCEL_XHI,
+ OQO_O2_SMB0_ACCEL_YHI,
+ OQO_O2_SMB0_ACCEL_ZHI,
+ OQO_O2_SMB0_LUMIN_HI
+ };
+ u8 loregs[4] = { OQO_O2_SMB0_ACCEL_XLO,
+ OQO_O2_SMB0_ACCEL_YLO,
+ OQO_O2_SMB0_ACCEL_ZLO,
+ OQO_O2_SMB0_LUMIN_LO
+ };
+
+ short ax[4] = { ABS_X, ABS_Y, ABS_Z, ABS_MISC };
+ u8 realgood = 0;
+ u16 res[4];
+ acpi_status status;
+ int i;
+
+ *good = 0;
+
+ /* Routine: Starting with the lo byte, read lo/hi bytes
+ alternately until two lo byte readings, match. Then
+ take that reading and combine it with the hi reading
+ sandwiched between. Errors can still happen when
+ jittering at wrap boundaries, but should be rare.
+
+ Don't use this for missile guidance.
+
+ Userspace post-processing error detection encouraged.
+ */
+ for (i = 0; i < 4; i++) {
+ int maxtry;
+ u32 log;
+ u8 r, lo, hi;
+
+ lo = loregs[i];
+ hi = hiregs[i];
+ log = 0;
+
+#define LOGRES(reg) do { \
+ status = oqo_smbus_getb(reg, &r); \
+ log <<= 8; log |= r; log &= 0xffffff; \
+ if (ACPI_FAILURE(status)) \
+ goto leave; \
+ } while (0)
+
+ maxtry = OQO_KINE_MAXTRY + 1;
+ while (maxtry) {
+ LOGRES(lo);
+ if (maxtry <= OQO_KINE_MAXTRY &&
+ (log >> 16) == (log & 0xff)) {
+ *(res + i) = log & 0xffff;
+ break;
+ }
+ LOGRES(hi);
+ maxtry--;
+ }
+
+ if (maxtry == OQO_KINE_MAXTRY)
+ realgood |= 1 << i;
+
+ if (maxtry) {
+ *good |= 1 << i;
+ /* JIC CYA: this bit may be reserved */
+ res[3] &= 0x7fff;
+ input_report_abs(oqo_kine, ax[i], (s16) res[i]);
+ }
+ /* else we had trouble getting the reading to lock
+ and we skip reporting this axis.
+ */
+ }
+
+ *x = (u16) res[0];
+ *y = (u16) res[1];
+ *z = (u16) res[2];
+ *lumin = (u16) res[3];
+ return status;
+leave:
+ return status;
+}
+
+/*
+ * Generic Device (interface-independent)
+ */
+
+static void oqo_kine_poll(struct input_polled_dev *dev)
+{
+ s16 x, y, z;
+ u16 lumin;
+ int good;
+ /* struct timeval tv1, tv2; */
+
+ if (dev != oqo_kine_polled)
+ return;
+ if (orig.kine_itvl < 0)
+ return;
+
+ x = y = z = 0;
+ oqo_read_kine(&good, &x, &y, &z, &lumin);
+}
+
+static int __devinit oqo_kine_init(void)
+{
+ int err;
+
+ oqo_kine = input_allocate_device();
+ if (!oqo_kine)
+ return -ENOMEM;
+
+ oqo_kine->name = "OQO embedded accelerometer";
+ oqo_kine->phys = "platform:oqo-wmi:kine";
+ oqo_kine->id.bustype = 0;
+ oqo_kine->id.vendor = 0;
+ oqo_kine->id.product = 2;
+ oqo_kine->id.version = 0;
+ oqo_kine->evbit[0] = BIT_MASK(EV_ABS);
+ set_bit(ABS_X, oqo_kine->absbit);
+ set_bit(ABS_Y, oqo_kine->absbit);
+ set_bit(ABS_Z, oqo_kine->absbit);
+ set_bit(ABS_MISC, oqo_kine->absbit);
+ oqo_kine->absmin[ABS_X] =
+ oqo_kine->absmin[ABS_Y] =
+ oqo_kine->absmin[ABS_Z] = oqo_kine->absmin[ABS_MISC] = -32768;
+ oqo_kine->absmax[ABS_X] =
+ oqo_kine->absmax[ABS_Y] =
+ oqo_kine->absmax[ABS_Z] = oqo_kine->absmax[ABS_MISC] = 32767;
+
+ memcpy(oqo_kine->dev.bus_id, "kine", 4);
+
+ oqo_kine_polled = input_allocate_polled_device();
+ if (!oqo_kine_polled) {
+ err = -ENOMEM;
+ goto bail0;
+ }
+
+ oqo_kine_polled->poll = oqo_kine_poll;
+ oqo_kine_polled->poll_interval = 250;
+ oqo_kine_polled->input = oqo_kine;
+
+ orig.kine_itvl = -1; /* prevent callback from running */
+ err = input_register_polled_device(oqo_kine_polled);
+ if (err) {
+ printk(OQO_ERR "Failed to register OQO kine input\n");
+ goto bail1;
+ }
+
+ /* This will allow the callback to run now if successful. */
+ orig.kine_itvl = smread_u8(OQO_O2_SMB0_ACCEL_POLL_ITVL);
+ smwrite_u8(OQO_O2_SMB0_ACCEL_POLL_ITVL, 250);
+ curr.kine_itvl = smread_u8(OQO_O2_SMB0_ACCEL_POLL_ITVL);
+ if (orig.kine_itvl < 0 || curr.kine_itvl != 250) {
+ printk(OQO_ERR "Test communication with kine sensor failed\n");
+ err = -ENODEV;
+ goto bail2;
+ }
+
+ printk(OQO_INFO "Created OQO kine input.\n");
+ printk(OQO_INFO "Firmware interval %ims, driver interval %ims\n",
+ curr.kine_itvl, oqo_kine_polled->poll_interval);
+ return 0;
+bail2:
+ input_unregister_polled_device(oqo_kine_polled);
+bail1:
+ input_free_polled_device(oqo_kine_polled); /* frees oqo_kine */
+ return err;
+bail0:
+ input_free_device(oqo_kine);
+ return err;
+}
+
+static void __devexit oqo_kine_fini(void)
+{
+ smwrite_u8(OQO_O2_SMB0_ACCEL_POLL_ITVL, orig.kine_itvl);
+ input_unregister_polled_device(oqo_kine_polled);
+ input_free_polled_device(oqo_kine_polled);
+}
+
+/*
+ * Backlight device
+ */
+static int read_brightness(struct backlight_device *bd)
+{
+ return (int)smread_s16(OQO_O2_SMB0_BL_HI, OQO_O2_SMB0_BL_LO);
+}
+
+static int update_bl_status(struct backlight_device *bd)
+{
+ return smwrite_s16(OQO_O2_SMB0_BL_HI,
+ OQO_O2_SMB0_BL_LO, (s16) bd->props.brightness);
+}
+
+static struct backlight_ops oqo_bl_ops = {
+ .get_brightness = read_brightness,
+ .update_status = update_bl_status,
+};
+
+static int __devinit oqo_backlight_init(struct device *dev)
+{
+ struct backlight_device *bd;
+
+ /*
+ * It would be nice if someone would figure out how backlights
+ * like these, which are not driven through the video hardware,
+ * are supposed to find their associated fb and bind to it (and
+ * rebind when fb drivers change.
+ *
+ * Most extras backlights just shove a junk name in like we do here,
+ * and don't end up integrated with fbcon sysfs as a result.
+ */
+ bd = backlight_device_register("oqo-bl", dev, NULL, &oqo_bl_ops);
+
+ if (IS_ERR(bd)) {
+ printk(OQO_ERR "Could not register OQO backlight device\n");
+ oqo_backlight_device = NULL;
+ return PTR_ERR(bd);
+ }
+
+ oqo_backlight_device = bd;
+ bd->props.max_brightness = 0x7fff;
+ curr.bl_bright = orig.bl_bright = bd->props.brightness =
+ read_brightness(NULL);
+
+ if (bd->props.brightness < 0)
+ goto fail;
+
+ backlight_update_status(bd);
+ printk(OQO_INFO "Found backlight set at %i\n", bd->props.brightness);
+ return 0;
+
+fail:
+ backlight_device_unregister(oqo_backlight_device);
+ oqo_backlight_device = NULL;
+ return -ENODEV;
+}
+
+static void __devexit oqo_backlight_fini(void)
+{
+ if (!oqo_backlight_device)
+ return;
+ oqo_backlight_device->props.brightness = orig.bl_bright;
+ backlight_update_status(oqo_backlight_device);
+ backlight_device_unregister(oqo_backlight_device);
+}
+
+/*
+ * RFKill device
+ */
+
+static int oqo_rfkill_get(void *data, enum rfkill_state *state)
+{
+ int res;
+
+ res = smread_u8(OQO_O2_SMB0_WWAN_DSBL_ADDR);
+ if (res < 0)
+ return res;
+
+ res &= OQO_O2_SMB0_WWAN_DSBL_MASK;
+
+ if (res)
+ *state = RFKILL_STATE_SOFT_BLOCKED;
+ else
+ *state = RFKILL_STATE_UNBLOCKED;
+
+ return 0;
+}
+
+static int oqo_rfkill_toggle(void *data, enum rfkill_state state)
+{
+ int res;
+
+ res = smread_u8(OQO_O2_SMB0_WWAN_DSBL_ADDR);
+
+ if (state == RFKILL_STATE_UNBLOCKED)
+ res &= ~OQO_O2_SMB0_WWAN_DSBL_MASK;
+ else
+ res |= OQO_O2_SMB0_WWAN_DSBL_MASK;
+
+ return smwrite_u8(OQO_O2_SMB0_WWAN_DSBL_ADDR, res);
+}
+
+static int __devinit oqo_rfkill_init(struct device *dev)
+{
+ int res;
+
+ oqo_rfkill = rfkill_allocate(dev, RFKILL_TYPE_WWAN);
+ if (!oqo_rfkill)
+ return -ENODEV;
+
+ res = smread_u8(OQO_O2_SMB0_WWAN_DSBL_ADDR);
+ res &= OQO_O2_SMB0_WWAN_DSBL_MASK;
+
+ oqo_rfkill->name = "oqo-wwan";
+ if (res)
+ oqo_rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
+ else
+ oqo_rfkill->state = RFKILL_STATE_UNBLOCKED;
+
+ oqo_rfkill->get_state = oqo_rfkill_get;
+ oqo_rfkill->toggle_radio = oqo_rfkill_toggle;
+ oqo_rfkill->user_claim_unsupported = 1;
+
+ res = rfkill_register(oqo_rfkill);
+
+ if (res)
+ rfkill_free(oqo_rfkill);
+
+ return res;
+}
+
+static void __devexit oqo_rfkill_fini(void)
+{
+ if (!oqo_rfkill)
+ return;
+ rfkill_unregister(oqo_rfkill);
+}
+
+/*
+ * Platform device
+ */
+
+static int __devinit oqo_platform_probe(struct platform_device *device)
+{
+ int err;
+ int i;
+ char *troubleok = "trouble, but continuing.\n";
+
+ memset(oqo_sn, 0, OQO_O2_SMB0_SERIAL_LEN + 1);
+ for (i = 0; i < OQO_O2_SMB0_SERIAL_LEN; i++) {
+ err = oqo_smbus_getb(OQO_O2_SMB0_SERIAL_START + i, oqo_sn + i);
+ if (err) {
+ printk(OQO_ERR "Serial number check failed.\n");
+ return err;
+ }
+ }
+ printk(OQO_INFO "Found OQO with serial number %s.\n", oqo_sn);
+
+ err = oqo_backlight_init(&device->dev);
+ if (err)
+ printk(OQO_ERR "Backlight init %s", troubleok);
+
+ err = oqo_rfkill_init(&device->dev);
+ if (err)
+ printk(OQO_ERR "RFKill init %s", troubleok);
+
+ /* LID does not work at all yet, and this may be taken
+ care of by ACPI.
+ */
+ orig.lid_wakes = smread_u8(OQO_O2_SMB0_LID_WAKES_ADDR);
+ orig.lid_wakes &= OQO_O2_SMB0_LID_WAKES_MASK;
+ orig.lid_wakes = curr.lid_wakes = !!orig.lid_wakes;
+ if (orig.lid_wakes < 0) {
+ printk(OQO_ERR "Wake on LID event %s", troubleok);
+ } else {
+ printk(OQO_INFO "Wake on LID is %s.\n",
+ (orig.lid_wakes ? "on" : "off"));
+ }
+
+ err = oqo_kine_init();
+ return err;
+}
+
+static int oqo_platform_remove(struct platform_device *device)
+{
+ oqo_backlight_fini();
+ oqo_rfkill_fini();
+ oqo_kine_fini();
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int oqo_platform_suspend(struct platform_device *dev, pm_message_t state)
+{
+ if (!interface)
+ return -ENOMEM;
+
+ /* This sticks during boot so do not turn it entirely off */
+ if (oqo_backlight_device) {
+ curr.bl_bright = read_brightness(oqo_backlight_device);
+ smwrite_s16(OQO_O2_SMB0_BL_HI, OQO_O2_SMB0_BL_LO, 256);
+ }
+ return 0;
+}
+
+static int oqo_platform_resume(struct platform_device *device)
+{
+ if (!interface)
+ return -ENOMEM;
+
+ if (oqo_backlight_device) {
+ smwrite_s16(OQO_O2_SMB0_BL_HI,
+ OQO_O2_SMB0_BL_LO, curr.bl_bright);
+ }
+
+ return 0;
+}
+
+#else
+#define oqo_platform_suspend NULL
+#define oqo_platform_resume NULL
+#endif
+
+static struct platform_driver oqo_platform_driver = {
+ .driver = {
+ .name = "oqo-wmi",
+ .owner = THIS_MODULE,
+ },
+ .probe = oqo_platform_probe,
+ .remove = oqo_platform_remove,
+ .suspend = oqo_platform_suspend,
+ .resume = oqo_platform_resume,
+};
+
+static int __init oqo_wmi_init(void)
+{
+ int err;
+
+ dmi_check_system(oqo_dmis);
+
+ if (!interface && force) {
+ model = oqo_models;
+ if (wmi_has_guid(OQO_O2_AMW0_GUID))
+ interface = &AMW0_interface;
+ }
+
+ if (!interface) {
+ printk(OQO_ERR "No or unsupported WMI interface. Aborting.\n");
+ printk(OQO_ERR "Hint: Get dmidecode working and try again.\n");
+ printk(OQO_ERR "(Check \"System Management BIOS\" in BIOS)\n");
+ if (!force)
+ printk(OQO_ERR "Use the force option to skip DMI"
+ " checking\n");
+ return -ENODEV;
+ }
+
+ err = platform_driver_register(&oqo_platform_driver);
+ if (err) {
+ printk(OQO_ERR "platform_driver_register gave %d.\n", err);
+ goto bail0;
+ }
+
+ oqo_platform_device = platform_device_alloc("oqo-wmi", -1);
+ if (!oqo_platform_device) {
+ printk(OQO_ERR "Could not allocate platform device.\n");
+ err = -ENOMEM;
+ goto bail1;
+ }
+
+ err = platform_device_add(oqo_platform_device);
+ if (err) {
+ printk(OQO_ERR "platform_device_add gave %d.\n", err);
+ platform_device_put(oqo_platform_device);
+ goto bail1;
+ }
+
+ return 0;
+
+bail1:
+ platform_driver_unregister(&oqo_platform_driver);
+bail0:
+ return err;
+}
+
+static void __exit oqo_wmi_fini(void)
+{
+ platform_device_del(oqo_platform_device);
+ platform_driver_unregister(&oqo_platform_driver);
+
+ return;
+}
+
+module_init(oqo_wmi_init);
+module_exit(oqo_wmi_fini);
--
1.6.1.76.gc123b
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists