linux-kernel - [PATCH] smc-ultra: get rid of "eth%d" message

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <4969CFF2.9020202@freemail.hu>
Date:	Sun, 11 Jan 2009 11:54:42 +0100
From:	Németh Márton <nm127@...email.hu>
To:	Paul Gortmaker <p_gortmaker@...oo.com>, netdev@...r.kernel.org
CC:	LKML <linux-kernel@...r.kernel.org>
Subject: [PATCH] smc-ultra: get rid of "eth%d" message

From: Márton Németh <nm127@...email.hu>

Print out the dev->name only after register_netdev().  If the dev->name is
printk()ed out before calling register_netdev() the result will be "eth%d"
in the dmesg instead of "eth0".

Signed-off-by: Márton Németh <nm127@...email.hu>
---
--- linux-2.6.28/drivers/net/smc-ultra.c.orig	2009-01-10 20:57:36.000000000 +0100
+++ linux-2.6.28/drivers/net/smc-ultra.c	2009-01-10 20:59:48.000000000 +0100
@@ -228,9 +228,6 @@ static int __init ultra_probe1(struct ne
 	for (i = 0; i < 6; i++)
 		dev->dev_addr[i] = inb(ioaddr + 8 + i);

-	printk("%s: %s at %#3x, %s", dev->name, model_name,
-	       ioaddr, print_mac(mac, dev->dev_addr));
-
 	/* Switch from the station address to the alternate register set and
 	   read the useful registers there. */
 	outb(0x80 | reg4, ioaddr + 4);
@@ -253,8 +250,10 @@ static int __init ultra_probe1(struct ne
 		irq = irqmap[((irqreg & 0x40) >> 4) + ((irqreg & 0x0c) >> 2)];

 		if (irq == 0) {
-			printk(", failed to detect IRQ line.\n");
-			retval =  -EAGAIN;
+			printk(KERN_ERR "%s at %#3x, %s, "
+			       "failed to detect IRQ line.\n", model_name,
+			       ioaddr, print_mac(mac, dev->dev_addr));
+			retval = -EAGAIN;
 			goto out;
 		}
 		dev->irq = irq;
@@ -280,22 +279,19 @@ static int __init ultra_probe1(struct ne

 	ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG)*256);
 	if (!ei_status.mem) {
-		printk(", failed to ioremap.\n");
-		retval =  -ENOMEM;
+		printk(KERN_ERR "%s at %#3x, %s, failed to ioremap.\n",
+		       model_name, ioaddr, print_mac(mac, dev->dev_addr));
+		retval = -ENOMEM;
 		goto out;
 	}

 	dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG)*256;

 	if (piomode) {
-		printk(",%s IRQ %d programmed-I/O mode.\n",
-			   eeprom_irq ? "EEPROM" : "assigned ", dev->irq);
 		ei_status.block_input = &ultra_pio_input;
 		ei_status.block_output = &ultra_pio_output;
 		ei_status.get_8390_hdr = &ultra_pio_get_hdr;
 	} else {
-		printk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ",
-			   dev->irq, dev->mem_start, dev->mem_end-1);
 		ei_status.block_input = &ultra_block_input;
 		ei_status.block_output = &ultra_block_output;
 		ei_status.get_8390_hdr = &ultra_get_8390_hdr;
@@ -311,6 +307,21 @@ static int __init ultra_probe1(struct ne
 	retval = register_netdev(dev);
 	if (retval)
 		goto out;
+
+	if (piomode) {
+		printk(KERN_INFO "%s: %s at %#3x, %s,"
+			"%s IRQ %d programmed-I/O mode.\n",
+			dev->name, model_name, ioaddr,
+			print_mac(mac, dev->dev_addr),
+			eeprom_irq ? " EEPROM" : " assigned", dev->irq);
+	} else {
+		printk(KERN_INFO "%s: %s at %#3x, %s,"
+			"%s IRQ %d memory %#lx-%#lx.\n",
+			dev->name, model_name, ioaddr,
+			print_mac(mac, dev->dev_addr),
+			eeprom_irq ? "" : " assigned",
+			dev->irq, dev->mem_start, dev->mem_end-1);
+	}
 	return 0;
 out:
 	release_region(ioaddr, ULTRA_IO_EXTENT);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/