| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200901192339.03967.arvidjaar@mail.ru>
Date: Mon, 19 Jan 2009 23:39:01 +0300
From: Andrey Borzenkov <arvidjaar@...l.ru>
To: linux-usb@...r.kernel.org, linux-pm@...ts.linux-foundation.org,
linux-acpi@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Subject: [2.6.29-rc2] First suspend after reboot resumes immediately.
Subsequent suspends seem fine. I suspect it is related to USB controller;
but because I see ACPI related message this is sent to linux-acpi as well.
Specifically, I am suspicious of this:
[ 132.763954] ohci_hcd 0000:00:02.0: wake-up capability enabled by ACPI
The controller immediately resumes after any attempt to suspend it, so any
autosuspend functionality is currently disabled. But it /looks/ like ACPI
somehow tries to do it anyway.
I can also reproduce it by unloading and reloading USB drivers which
supports USB guess.
dmesg follows.
[ 0.000000] Linux version 2.6.29-rc2-1avb (bor@...ker) (gcc version 4.3.2
(GCC) ) #10 Mon Jan 19 21:04:50 MSK 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] PAT WC disabled due to known CPU erratum.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
[ 0.000000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ef60000 (usable)
[ 0.000000] BIOS-e820: 000000001ef60000 - 000000001ef70000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ef70000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x1ef60 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 1ef60000 @ 7000-d000
[ 0.000000] RAMDISK: 1ebcf000 - 1ef4f86c
[ 0.000000] ACPI: RSDP 000F0090, 0014 (r0 TOSHIB)
[ 0.000000] ACPI: RSDT 1EF60000, 0028 (r1 TOSHIB 750 970814 TASM
4010000)
[ 0.000000] ACPI: FACP 1EF60054, 0084 (r2 TOSHIB 750 970814 TASM
4010000)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match
PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 1EF600D8, 68DA (r1 TOSHIB 4000 20020417 MSFT
100000A)
[ 0.000000] ACPI: FACS 000EEE00, 0040
[ 0.000000] 495MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ef60000
[ 0.000000] low ram: 00000000 - 1ef60000
[ 0.000000] bootmap 00001000 - 00004dec
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001ef60000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000100000 - 0000973dd8] TEXT DATA BSS ==>
[0000100000 - 0000973dd8]
[ 0.000000] #2 [001ebcf000 - 001ef4f86c] RAMDISK ==>
[001ebcf000 - 001ef4f86c]
[ 0.000000] #3 [0000974000 - 0000978000] INIT_PG_TABLE ==>
[0000974000 - 0000978000]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #5 [0000007000 - 0000009000] PGTABLE ==>
[0000007000 - 0000009000]
[ 0.000000] #6 [0000001000 - 0000005000] BOOTMAP ==>
[0000001000 - 0000005000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001ef60
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001ef60
[ 0.000000] On node 0 totalpages: 126719
[ 0.000000] free_area_init_node: node 0, pgdat c03caa00, node_mem_map
c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 959 pages used for memmap
[ 0.000000] Normal zone: 121761 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xee08
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
00000000000ee000
[ 0.000000] PM: Registered nosave memory: 00000000000ee000 -
00000000000ef000
[ 0.000000] PM: Registered nosave memory: 00000000000ef000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dff80000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 125728
[ 0.000000] Kernel command line: BOOT_IMAGE=2.6.29-rc2-1avb root=LABEL=/
resume=LABEL=swap acpi_backlight=vendor
netconsole=@...0.0.1/eth0,@10.0.0.2/00:17:42:21:27:e4 vga=791
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c0414000 soft=c0413000
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 747.745 MHz processor.
[ 0.003333] Console: colour dummy device 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
Ingo Molnar
[ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.003333] ... MAX_LOCK_DEPTH: 48
[ 0.003333] ... MAX_LOCKDEP_KEYS: 8191
[ 0.003333] ... CLASSHASH_SIZE: 4096
[ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.003333] ... CHAINHASH_SIZE: 8192
[ 0.003333] memory used by lock dependency info: 2591 kB
[ 0.003333] per task-struct memory footprint: 1920 bytes
[ 0.003333] ------------------------
[ 0.003333] | Locking API testsuite:
[ 0.003333]
----------------------------------------------------------------------------
[ 0.003333] | spin |wlock |rlock |mutex
| wsem | rsem |
[ 0.003333]
--------------------------------------------------------------------------
[ 0.003333] A-A deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] A-B-B-A deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] A-B-B-C-C-A deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] A-B-C-A-B-C deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] double unlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] initialize held: ok | ok | ok | ok
| ok | ok |
[ 0.003333] bad unlock order: ok | ok | ok | ok
| ok | ok |
[ 0.003333]
--------------------------------------------------------------------------
[ 0.003333] recursive read-lock: | ok |
| ok |
[ 0.003333] recursive read-lock #2: | ok |
| ok |
[ 0.003333] mixed read-write-lock: | ok |
| ok |
[ 0.003333] mixed write-read-lock: | ok |
| ok |
[ 0.003333]
--------------------------------------------------------------------------
[ 0.003333] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.003333] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.003333] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.003333] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.003333] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.003333] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.003333] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.003333] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.003333] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.003333] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.003333] hard-irq read-recursion/123: ok |
[ 0.003333] soft-irq read-recursion/123: ok |
[ 0.003333] hard-irq read-recursion/132: ok |
[ 0.003333] soft-irq read-recursion/132: ok |
[ 0.003333] hard-irq read-recursion/213: ok |
[ 0.003333] soft-irq read-recursion/213: ok |
[ 0.003333] hard-irq read-recursion/231: ok |
[ 0.003333] soft-irq read-recursion/231: ok |
[ 0.003333] hard-irq read-recursion/312: ok |
[ 0.003333] soft-irq read-recursion/312: ok |
[ 0.003333] hard-irq read-recursion/321: ok |
[ 0.003333] soft-irq read-recursion/321: ok |
[ 0.003333] -------------------------------------------------------
[ 0.003333] Good, all 218 testcases passed! |
[ 0.003333] ---------------------------------
[ 0.003333] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.003333] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.003333] Memory: 489984k/507264k available (2104k kernel code, 16676k
reserved, 794k data, 232k init, 0k highmem)
[ 0.003333] virtual kernel memory layout:
[ 0.003333] fixmap : 0xfffed000 - 0xfffff000 ( 72 kB)
[ 0.003333] vmalloc : 0xdf760000 - 0xfffeb000 ( 520 MB)
[ 0.003333] lowmem : 0xc0000000 - 0xdef60000 ( 495 MB)
[ 0.003333] .init : 0xc03d6000 - 0xc0410000 ( 232 kB)
[ 0.003333] .data : 0xc030e245 - 0xc03d4e00 ( 794 kB)
[ 0.003333] .text : 0xc0100000 - 0xc030e245 (2104 kB)
[ 0.003333] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.003333] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.003398] Calibrating delay loop (skipped), value calculated using
timer frequency.. 1496.80 BogoMIPS (lpj=2492483)
[ 0.003584] Mount-cache hash table entries: 512
[ 0.006247] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.006312] CPU: L2 cache: 256K
[ 0.006330] CPU serial number disabled.
[ 0.006399] CPU: Intel Pentium III (Coppermine) stepping 0a
[ 0.006452] Checking 'hlt' instruction... OK.
[ 0.017719] Freeing SMP alternatives: 0k freed
[ 0.017742] ACPI: Core revision 20081204
[ 0.048821] ACPI: setting ELCR to 0200 (from 0a00)
[ 0.052315] Testing tracer nop: PASSED
[ 0.056794] net_namespace: 732 bytes
[ 0.058508] NET: Registered protocol family 16
[ 0.061942] ACPI: bus type pci registered
[ 0.063976] PCI: PCI BIOS revision 2.10 entry at 0xfe5ae, last bus=5
[ 0.064028] PCI: Using configuration type 1 for base access
[ 0.075451] bio: create slab <bio-0> at 0
[ 0.086397] ACPI: EC: Look up EC in DSDT
[ 0.115449] ACPI: Interpreter enabled
[ 0.115514] ACPI: (supports S0 S3 S4 S5)
[ 0.115939] ACPI: Using PIC for interrupt routing
[ 0.176069] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.176236] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.177546] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff]
[ 0.177947] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7eff000-0xf7efffff]
[ 0.178091] pci 0000:00:02.0: PME# supported from D3hot D3cold
[ 0.178135] pci 0000:00:02.0: PME# disabled
[ 0.178303] pci 0000:00:04.0: reg 20 io port: [0xeff0-0xefff]
[ 0.178489] pci 0000:00:06.0: reg 10 io port: [0xed00-0xedff]
[ 0.178513] pci 0000:00:06.0: reg 14 32bit mmio: [0xf7efe000-0xf7efefff]
[ 0.178641] pci 0000:00:06.0: supports D1 D2
[ 0.178649] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
[ 0.178676] pci 0000:00:06.0: PME# disabled
[ 0.179089] pci 0000:00:08.0: quirk: region ee00-ee3f claimed by ali7101
ACPI
[ 0.179120] pci 0000:00:08.0: quirk: region ef00-ef1f claimed by ali7101
SMB
[ 0.179241] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7efd000-0xf7efdfff]
[ 0.179265] pci 0000:00:0a.0: reg 14 io port: [0xeb40-0xeb7f]
[ 0.179289] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf7d00000-0xf7dfffff]
[ 0.179403] pci 0000:00:0a.0: supports D1 D2
[ 0.179410] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179439] pci 0000:00:0a.0: PME# disabled
[ 0.179568] pci 0000:00:10.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.179628] pci 0000:00:10.0: supports D1 D2
[ 0.179636] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179665] pci 0000:00:10.0: PME# disabled
[ 0.179779] pci 0000:00:11.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.179944] pci 0000:00:11.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.180169] pci 0000:00:12.0: reg 10 32bit mmio: [0xf7cffe00-0xf7cfffff]
[ 0.180316] pci 0000:00:12.0: supports D1 D2
[ 0.180324] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180354] pci 0000:00:12.0: PME# disabled
[ 0.180546] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfdffffff]
[ 0.180570] pci 0000:01:00.0: reg 14 32bit mmio: [0xfbc00000-0xfbffffff]
[ 0.180593] pci 0000:01:00.0: reg 18 32bit mmio: [0xf8000000-0xf9ffffff]
[ 0.180615] pci 0000:01:00.0: reg 1c 32bit mmio: [0xf7ff8000-0xf7ffffff]
[ 0.180661] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.180732] pci 0000:01:00.0: supports D1 D2
[ 0.180869] pci 0000:00:01.0: bridge 32bit mmio: [0xf7f00000-0xfdffffff]
[ 0.181073] pci_bus 0000:00: on NUMA node 0
[ 0.181124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.181745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.220197] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
[ 0.221156] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
[ 0.222058] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
[ 0.222961] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11)
[ 0.224024] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11)
[ 0.224938] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
[ 0.226456] ACPI: Power Resource [PFAN] (off)
[ 0.229542] PCI: Using ACPI for IRQ routing
[ 0.233783] pnp: PnP ACPI init
[ 0.233980] ACPI: bus type pnp registered
[ 0.260086] pnp: PnP ACPI: found 12 devices
[ 0.260145] ACPI: ACPI bus type pnp unregistered
[ 0.260260] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.260290] system 00:00: iomem range 0xe0000-0xeffff could not be
reserved
[ 0.260318] system 00:00: iomem range 0xf0000-0xfffff could not be
reserved
[ 0.260346] system 00:00: iomem range 0x100000-0x1ef5ffff could not be
reserved
[ 0.260376] system 00:00: iomem range 0x1ef60000-0x1ef6ffff could not be
reserved
[ 0.260405] system 00:00: iomem range 0x1f000000-0x1fffffff has been
reserved
[ 0.260432] system 00:00: iomem range 0x1ef70000-0x1effffff has been
reserved
[ 0.260462] system 00:00: iomem range 0xffe00000-0xffffffff could not be
reserved
[ 0.260555] system 00:08: ioport range 0x370-0x371 has been reserved
[ 0.260583] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.260609] system 00:08: ioport range 0x480-0x48f has been reserved
[ 0.260634] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.260661] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.260686] system 00:08: ioport range 0x6c0-0x6ff has been reserved
[ 0.260713] system 00:08: ioport range 0xe000-0xe07f has been reserved
[ 0.260740] system 00:08: ioport range 0xe080-0xe0ff has been reserved
[ 0.260767] system 00:08: ioport range 0xe400-0xe47f has been reserved
[ 0.260794] system 00:08: ioport range 0xe480-0xe4ff has been reserved
[ 0.260821] system 00:08: ioport range 0xe800-0xe87f has been reserved
[ 0.260847] system 00:08: ioport range 0xe880-0xe8ff has been reserved
[ 0.260875] system 00:08: ioport range 0xec00-0xec7f has been reserved
[ 0.260902] system 00:08: ioport range 0xec80-0xecff has been reserved
[ 0.260931] system 00:08: ioport range 0xee00-0xee41 could not be
reserved
[ 0.260959] system 00:08: ioport range 0xee90-0xee9f has been reserved
[ 0.260987] system 00:08: ioport range 0xeeac-0xeeac has been reserved
[ 0.261015] system 00:08: ioport range 0xef00-0xef3f could not be
reserved
[ 0.261044] system 00:08: ioport range 0xef40-0xef5f has been reserved
[ 0.300287] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.300342] pci 0000:00:01.0: IO window: disabled
[ 0.300375] pci 0000:00:01.0: MEM window: 0xf7f00000-0xfdffffff
[ 0.300405] pci 0000:00:01.0: PREFETCH window:
0x00000048000000-0x000000480fffff
[ 0.300451] pci 0000:00:10.0: CardBus bridge, secondary bus 0000:02
[ 0.300472] pci 0000:00:10.0: IO window: 0x001000-0x0010ff
[ 0.300499] pci 0000:00:10.0: IO window: 0x001400-0x0014ff
[ 0.300528] pci 0000:00:10.0: PREFETCH window: 0x30000000-0x33ffffff
[ 0.300557] pci 0000:00:10.0: MEM window: 0x34000000-0x37ffffff
[ 0.300586] pci 0000:00:11.0: CardBus bridge, secondary bus 0000:06
[ 0.300607] pci 0000:00:11.0: IO window: 0x001800-0x0018ff
[ 0.300634] pci 0000:00:11.0: IO window: 0x001c00-0x001cff
[ 0.300662] pci 0000:00:11.0: PREFETCH window: 0x38000000-0x3bffffff
[ 0.300691] pci 0000:00:11.0: MEM window: 0x3c000000-0x3fffffff
[ 0.300721] pci 0000:00:11.1: CardBus bridge, secondary bus 0000:0a
[ 0.300741] pci 0000:00:11.1: IO window: 0x002000-0x0020ff
[ 0.300768] pci 0000:00:11.1: IO window: 0x002400-0x0024ff
[ 0.300796] pci 0000:00:11.1: PREFETCH window: 0x40000000-0x43ffffff
[ 0.300825] pci 0000:00:11.1: MEM window: 0x44000000-0x47ffffff
[ 0.300892] pci 0000:00:01.0: setting latency timer to 64
[ 0.300925] pci 0000:00:10.0: enabling device (0000 -> 0003)
[ 0.302764] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.302793] PCI: setting IRQ 11 as level-triggered
[ 0.302807] pci 0000:00:10.0: PCI INT A -> Link[LNKC] -> GSI 11 (level,
low) -> IRQ 11
[ 0.302865] pci 0000:00:11.0: enabling device (0000 -> 0003)
[ 0.304375] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.304403] pci 0000:00:11.0: PCI INT A -> Link[LNKA] -> GSI 11 (level,
low) -> IRQ 11
[ 0.304461] pci 0000:00:11.1: enabling device (0000 -> 0003)
[ 0.305920] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.305946] pci 0000:00:11.1: PCI INT B -> Link[LNKB] -> GSI 11 (level,
low) -> IRQ 11
[ 0.305994] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.306003] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.306012] pci_bus 0000:01: resource 0 mem: [0x0-0x0]
[ 0.306021] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xfdffffff]
[ 0.306030] pci_bus 0000:01: resource 2 mem: [0x48000000-0x480fffff]
[ 0.306039] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.306049] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
[ 0.306057] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
[ 0.306066] pci_bus 0000:02: resource 2 mem: [0x30000000-0x33ffffff]
[ 0.306075] pci_bus 0000:02: resource 3 mem: [0x34000000-0x37ffffff]
[ 0.306085] pci_bus 0000:06: resource 0 io: [0x1800-0x18ff]
[ 0.306094] pci_bus 0000:06: resource 1 io: [0x1c00-0x1cff]
[ 0.306103] pci_bus 0000:06: resource 2 mem: [0x38000000-0x3bffffff]
[ 0.306112] pci_bus 0000:06: resource 3 mem: [0x3c000000-0x3fffffff]
[ 0.306122] pci_bus 0000:0a: resource 0 io: [0x2000-0x20ff]
[ 0.306130] pci_bus 0000:0a: resource 1 io: [0x2400-0x24ff]
[ 0.306139] pci_bus 0000:0a: resource 2 mem: [0x40000000-0x43ffffff]
[ 0.306148] pci_bus 0000:0a: resource 3 mem: [0x44000000-0x47ffffff]
[ 0.306301] NET: Registered protocol family 2
[ 0.307574] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.308643] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.309380] TCP bind hash table entries: 16384 (order: 7, 655360 bytes)
[ 0.315949] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.316246] TCP reno registered
[ 0.317112] NET: Registered protocol family 1
[ 0.318626] checking if image is initramfs... it is
[ 0.800127] Switched to high resolution mode on CPU 0
[ 1.231151] Freeing initrd memory: 3586k freed
[ 1.239869] Initializing RT-Tester: OK
[ 1.241388] audit: initializing netlink socket (disabled)
[ 1.241644] type=2000 audit(1232396742.240:1): initialized
[ 1.250467] Kprobe smoke test started
[ 1.262102] Kprobe smoke test passed successfully
[ 1.262221] Testing tracer sched_switch: PASSED
[ 1.400842] msgmni has been set to 964
[ 1.402425] io scheduler noop registered
[ 1.402460] io scheduler anticipatory registered
[ 1.402480] io scheduler deadline registered
[ 1.402611] io scheduler cfq registered (default)
[ 1.402900] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 1.402980] pci 0000:00:0a.0: Firmware left e100 interrupts enabled;
disabling
[ 1.403082] pci 0000:01:00.0: Boot video device
[ 1.406178] vesafb: framebuffer at 0xfc000000, mapped to 0xdf780000,
using 3072k, total 16384k
[ 1.406232] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[ 1.406253] vesafb: protected mode interface info at c000:775e
[ 1.406274] vesafb: pmi: set display start = c00c777f, set palette =
c00c77e2
[ 1.406296] vesafb: scrolling: redraw
[ 1.406317] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.473929] Console: switching to colour frame buffer device 128x48
[ 1.539446] fb0: VESA VGA frame buffer device
[ 1.984738] brd: module loaded
[ 1.985188] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 1.985945] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.989208] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.989956] e100 0000:00:0a.0: PCI INT A -> Link[LNKD] -> GSI 11 (level,
low) -> IRQ 11
[ 2.018108] e100 0000:00:0a.0: PME# disabled
[ 2.019933] e100: eth0: e100_probe: addr 0xf7efd000, irq 11, MAC addr
00:00:39:d7:14:a1
[ 2.021455] netconsole: local port 6665
[ 2.021945] netconsole: local IP 10.0.0.1
[ 2.022442] netconsole: interface eth0
[ 2.022907] netconsole: remote port 6666
[ 2.023688] netconsole: remote IP 10.0.0.2
[ 2.024200] netconsole: remote ethernet address 00:17:42:21:27:e4
[ 2.024994] netconsole: device eth0 not up yet, forcing it
[ 2.041876] e100: eth0: e100_request_firmware: Failed to load firmware
"e100/d101m_ucode.bin": -22
[ 2.043848] netconsole: failed to open eth0
[ 2.044380] netconsole: cleaning up
[ 2.046108] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 2.052660] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.053449] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.057241] mice: PS/2 mouse device common for all mice
[ 2.058698] cpuidle: using governor ladder
[ 2.083433] cpuidle: using governor menu
[ 2.107883] TCP cubic registered
[ 2.131937] Using IPI Shortcut mode
[ 2.159264] registered taskstats version 1
[ 2.184377] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 2.210742] Freeing unused kernel memory: 232k freed
[ 2.235995] Write protecting the kernel text: 2108k
[ 2.260576] Write protecting the kernel read-only data: 620k
[ 2.317122] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 2.944824] SCSI subsystem initialized
[ 3.016067] Driver 'sd' needs updating - please use bus_type methods
[ 3.148439] libata version 3.00 loaded.
[ 3.191171] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
[ 3.215842] scsi0 : pata_ali
[ 3.240392] scsi1 : pata_ali
[ 3.267837] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xeff0 irq
14
[ 3.290960] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xeff8 irq
15
[ 3.474168] ata1.00: ATA-5: IC25N020ATDA04-0, DA3OA70A, max UDMA/100
[ 3.496878] ata1.00: 39070080 sectors, multi 0: LBA
[ 3.519208] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 3.554005] ata1.00: configured for UDMA/33
[ 3.577983] scsi 0:0:0:0: Direct-Access ATA IC25N020ATDA04-0
DA3O PQ: 0 ANSI: 5
[ 3.602313] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0
GB/18.6 GiB)
[ 3.625303] sd 0:0:0:0: [sda] Write Protect is off
[ 3.648022] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.648205] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.673804] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0
GB/18.6 GiB)
[ 3.697993] sd 0:0:0:0: [sda] Write Protect is off
[ 3.721864] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.722047] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.746725] sda: sda1 sda2
[ 3.800099] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.023930] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-C2502, 1313, max UDMA/33
[ 4.048353] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues.
It can be enabled
[ 4.072801] ata2.00: WARNING: via pata_ali.atapi_dma modparam or
corresponding sysfs node.
[ 4.110470] ata2.00: configured for UDMA/33
[ 4.137806] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-C2502
1313 PQ: 0 ANSI: 5
[ 4.429121] ReiserFS: sda2: found reiserfs format "3.6" with standard
journal
[ 4.455829] ReiserFS: sda2: using ordered data mode
[ 4.496181] ReiserFS: sda2: journal params: device sda2, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age
30, max trans age 30
[ 4.559357] ReiserFS: sda2: checking transaction log (sda2)
[ 4.637914] ReiserFS: sda2: Using r5 hash to sort names
[ 7.413076] usbcore: registered new interface driver usbfs
[ 7.440426] usbcore: registered new interface driver hub
[ 7.467200] usbcore: registered new device driver usb
[ 14.521396] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 14.523608] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[ 14.523628] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11
(level, low) -> IRQ 11
[ 14.523810] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 14.526264] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
[ 14.526396] ohci_hcd 0000:00:02.0: irq 11, io mem 0xf7eff000
[ 14.526472] Linux agpgart interface v0.103
[ 14.567350] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 14.578051] ACPI: Power Button (FF) [PWRF]
[ 14.578847] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 14.594398] ACPI: Lid Switch [LID]
[ 14.609290] usb usb1: configuration #1 chosen from 1 choice
[ 14.640544] hub 1-0:1.0: USB hub found
[ 14.640845] hub 1-0:1.0: 3 ports detected
[ 14.783190] ACPI: AC Adapter [ADP1] (on-line)
[ 14.801030] ACPI Warning (nspredef-0940): \_SB_.BAT1._BIF: Return Package
type mismatch at index 12 - found Integer, expected String/Buffer [20081204]
[ 14.802548] ACPI: Battery Slot [BAT1] (battery present)
[ 14.802770] ACPI: Battery Slot [BAT2] (battery absent)
[ 14.819560] agpgart-ali 0000:00:00.0: ALi M1644 chipset
[ 14.833061] agpgart-ali 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
[ 14.844907] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 14.845769] processor ACPI_CPU:00: registered as cooling_device0
[ 14.965927] thermal LNXTHERM:01: registered as thermal_zone0
[ 14.967981] ACPI: Thermal Zone [THRM] (58 C)
[ 15.244811] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 15.244828] toshiba_acpi: HCI method: \_SB_.VALD.GHCI
[ 15.303315] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:14/device:15/input/input3
[ 15.316961] ACPI: Video Device [VGA] (multi-head: yes rom: yes post:
no)
[ 15.416846] fan PNP0C0B:00: registered as cooling_device1
[ 15.416886] ACPI: Fan [FAN] (off)
[ 15.507446] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.507825] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 15.559118] pci 0000:00:08.0: enabling device (0000 -> 0001)
[ 15.560404] ALi_M1535: initialized. timeout=60 sec (nowayout=0)
[ 15.846986] Driver 'sr' needs updating - please use bus_type methods
[ 15.902466] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 15.902493] Uniform CD-ROM driver Revision: 3.20
[ 15.903945] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 16.099411] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 16.816515] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input5
[ 16.983084] rtc_cmos 00:07: RTC can wake from S4
[ 16.984900] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 16.984998] rtc0: alarms up to one year, 114 bytes nvram
[ 17.178421] yenta_cardbus 0000:00:10.0: CardBus bridge found [12a3:ab01]
[ 17.304537] yenta_cardbus 0000:00:10.0: ISA IRQ mask 0x0000, PCI irq 11
[ 17.304556] yenta_cardbus 0000:00:10.0: Socket status: 30000059
[ 17.313791] yenta_cardbus 0000:00:11.0: CardBus bridge found [1179:0001]
[ 17.441061] yenta_cardbus 0000:00:11.0: ISA IRQ mask 0x04b8, PCI irq 11
[ 17.441076] yenta_cardbus 0000:00:11.0: Socket status: 30000007
[ 17.444395] yenta_cardbus 0000:00:11.1: CardBus bridge found [1179:0001]
[ 17.571331] yenta_cardbus 0000:00:11.1: ISA IRQ mask 0x04b8, PCI irq 11
[ 17.571349] yenta_cardbus 0000:00:11.1: Socket status: 30000007
[ 17.947089] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted
into slot 0
[ 18.681446] NET: Registered protocol family 23
[ 18.925773] Detected unconfigured Toshiba laptop with ALi ISA bridge SMSC
IrDA chip, pre-configuring device.
[ 18.925814] Activated ALi 1533 ISA bridge port 0x02e8.
[ 18.925831] Activated ALi 1533 ISA bridge port 0x02f8.
[ 18.926087] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e):
LPC47N227
[ 18.926103] smsc_superio_flat(): IrDA not enabled
[ 18.926132] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7,
mode: 0x02
[ 18.926172] SMsC IrDA Controller found
[ 18.926176] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7
[ 18.926395] No transceiver found. Defaulting to Fast pin select
[ 18.926439] irda0 (): not using net_device_ops yet
[ 18.927576] IrDA: Registered device irda0
[ 20.317350] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[ 20.319352] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 20.319373] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11
(level, low) -> IRQ 11
[ 24.530878] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 24.534346] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
clean.
[ 24.535874] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
clean.
[ 24.557357] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af:
excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 24.560824] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff:
clean.
[ 24.562351] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff:
clean.
[ 24.563868] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7:
clean.
[ 24.566429] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff:
clean.
[ 24.571005] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
clean.
[ 24.578360] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
clean.
[ 24.737568] Marking TSC unstable due to TSC halts in idle
[ 24.796747] Clocksource tsc unstable (delta = -84974128 ns)
[ 25.303851] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 25.307301] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
clean.
[ 25.308829] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
clean.
[ 25.310398] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
clean.
[ 25.312952] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
clean.
[ 25.315702] pcmcia_socket pcmcia_socket0: cs: memory probe
0xa0000000-0xa0ffffff: clean.
[ 25.330642] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 25.584442] orinoco 0.15 (David Gibson <hermes@...son.dropbear.id.au>,
Pavel Roskin <proski@....org>, et al)
[ 25.679610] orinoco_cs 0.15 (David Gibson <hermes@...son.dropbear.id.au>,
Pavel Roskin <proski@....org>, et al)
[ 25.722367] eth1 (orinoco_cs): not using net_device_ops yet
[ 25.762124] eth1: Hardware identity 0005:0002:0001:0002
[ 25.762237] eth1: Station identity 001f:0001:0006:000e
[ 25.762248] eth1: Firmware determined as Lucent/Agere 6.14
[ 25.762472] eth1: Attempting to download firmware agere_sta_fw.bin
[ 25.762503] hermes_dld: AUX enable returned 0
[ 25.763559] hermes_dld: AUX disable returned 0
[ 25.763567] hermes_dld: Actual PDA length 998, Max allowed 1000
[ 25.763575] eth1: Read PDA returned 0
[ 25.763588] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin
[ 25.886677] hermes_dld: AUX enable returned 0
[ 25.886742] hermes_dld: Enabling volatile, EP 0x000f8000
[ 25.887788] hermes_dld: PROGRAM_ENABLE returned 0
[ 25.887796] eth1: Program init returned 0
[ 25.887806] hermes_dld: Programming block of length 60416 to address
0x001f0000
[ 25.935898] hermes_dld: Programming block of length 4096 to address
0x001ef000
[ 25.939178] eth1: Program returned 0
[ 25.939187] hermes_dld: Found record 0x0003 at ddaddc1c
[ 25.939209] hermes_dld: Found record 0x0005 at ddaddca8
[ 25.939228] hermes_dld: Found record 0x0008 at ddaddcd2
[ 25.939244] hermes_dld: Found record 0x0007 at ddaddcc4
[ 25.939262] hermes_dld: Found record 0x0006 at ddaddcb6
[ 25.939282] hermes_dld: Found record 0x0110 at ddaddd9a
[ 25.939315] hermes_dld: Found record 0x0120 at ddadddba
[ 25.939348] hermes_dld: Found record 0x0130 at ddadddda
[ 25.939380] hermes_dld: Found record 0x0140 at ddadddfa
[ 25.939393] hermes_dld: Found record 0x0150 at ddadde02
[ 25.939406] hermes_dld: Using default record 0x0160 at dfabfb60
[ 25.939438] hermes_dld: Found record 0x0101 at ddaddd46
[ 25.939453] hermes_dld: Found record 0x0103 at ddaddd5c
[ 25.939473] hermes_dld: Found record 0x0104 at ddaddd6c
[ 25.939485] hermes_dld: Found record 0x0105 at ddaddd72
[ 25.939497] hermes_dld: Found record 0x0105 at ddaddd72
[ 25.939508] hermes_dld: Found record 0x0105 at ddaddd72
[ 25.939520] hermes_dld: Found record 0x0107 at ddaddd7e
[ 25.939532] hermes_dld: Found record 0x0109 at ddaddd8c
[ 25.939550] hermes_dld: Using default record 0x0161 at dfabfb80
[ 25.939765] eth1: Apply PDA returned 0
[ 25.939829] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000,
r2 0x0000
[ 25.939858] hermes_dld: AUX disable returned 0
[ 25.950498] eth1: Program end returned 0
[ 25.950507] eth1: hermes_present returned 1
[ 25.951323] eth1: Hardware identity 0005:0002:0001:0002
[ 25.951451] eth1: Station identity 001f:0002:0009:0030
[ 25.951461] eth1: Firmware determined as Lucent/Agere 9.48
[ 25.951469] eth1: Ad-hoc demo mode supported
[ 25.951477] eth1: IEEE standard IBSS ad-hoc mode supported
[ 25.951484] eth1: WEP supported, 104-bit key
[ 25.951492] eth1: WPA-PSK supported
[ 26.702954] eth1: MAC address 00:02:2d:26:95:6c
[ 26.703070] eth1: Station name "HERMES I"
[ 26.703921] eth1: ready
[ 26.704770] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f
[ 27.032767] Toshiba System Management Mode driver v1.11 26/9/2001
[ 27.124714] Non-volatile memory driver v1.3
[ 27.889696] device-mapper: uevent: version 1.0.3
[ 27.891810] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@...hat.com
[ 29.699045] device-mapper: multipath: version 1.0.5 loaded
[ 30.923734] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 30.924984] device-mapper: table: 254:0: multipath: error getting device
[ 30.925003] device-mapper: ioctl: error adding target to table
[ 39.237654] loop: module loaded
[ 43.771506] Adding 500432k swap on /dev/sda1. Priority:-1 extents:1
across:500432k
[ 47.789134] IrCOMM protocol (Dag Brattli)
[ 50.716012] PPP generic driver version 2.4.2
[ 57.581564] NET: Registered protocol family 17
[ 57.970436] eth1: Lucent/Agere firmware doesn't support manual roaming
[ 58.123407] eth1: New link status: Connected (0001)
[ 130.624810] PM: Syncing filesystems ... done.
[ 130.688894] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin
[ 130.731416] Freezing user space processes ... (elapsed 0.01 seconds)
done.
[ 130.748981] Freezing remaining freezable tasks ... (elapsed 0.00 seconds)
done.
[ 130.749673] Suspending console(s) (use no_console_suspend to debug)
[ 130.761183] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 131.218872] sd 0:0:0:0: [sda] Stopping disk
[ 131.899832] pci 0000:01:00.0: power state changed by ACPI to D3
[ 131.914446] e100 0000:00:0a.0: PME# enabled
[ 131.914687] e100 0000:00:0a.0: wake-up capability enabled by ACPI
[ 131.914858] e100 0000:00:0a.0: PCI INT A disabled
[ 131.984160] ALI 5451 0000:00:06.0: PCI INT A disabled
[ 131.997154] ALI 5451 0000:00:06.0: power state changed by ACPI to D3
[ 132.750111] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
[ 132.763635] ohci_hcd 0000:00:02.0: PCI INT A disabled
[ 132.763740] ohci_hcd 0000:00:02.0: PME# enabled
[ 132.763954] ohci_hcd 0000:00:02.0: wake-up capability enabled by ACPI
[ 132.793541] ACPI: Preparing to enter system sleep state S3
[ 132.793541] Back to C!
[ 132.793541] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf
(was 0x500001ff, writing 0x5000010b)
[ 132.793541] pci 0000:00:12.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
[ 132.793541] pci 0000:01:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
[ 132.807630] ACPI: Waking up from system sleep state S3
[ 132.827467] agpgart-ali 0000:00:00.0: PME# disabled
[ 132.827519] pci 0000:00:01.0: setting latency timer to 64
[ 132.827550] ohci_hcd 0000:00:02.0: wake-up capability disabled by ACPI
[ 132.827565] ohci_hcd 0000:00:02.0: PME# disabled
[ 132.840174] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11
(level, low) -> IRQ 11
[ 132.840202] ohci_hcd 0000:00:02.0: wake-up capability disabled by ACPI
[ 132.840217] ohci_hcd 0000:00:02.0: PME# disabled
[ 132.895449] usb usb1: root hub lost power or was reset
[ 132.907049] pata_ali 0000:00:04.0: restoring config space at offset 0x1
(was 0x2900001, writing 0x2900005)
[ 132.907105] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
[ 132.915553] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[ 132.915592] ALI 5451 0000:00:06.0: restoring config space at offset 0xf
(was 0x180201ff, writing 0x1802010b)
[ 132.915657] ALI 5451 0000:00:06.0: restoring config space at offset 0x1
(was 0x2900003, writing 0xc2900003)
[ 132.916112] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[ 132.916148] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11
(level, low) -> IRQ 11
[ 133.210096] pci 0000:00:07.0: PME# disabled
[ 133.210123] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001)
[ 133.223453] e100 0000:00:0a.0: restoring config space at offset 0xf (was
0x380801ff, writing 0x3808010b)
[ 133.223518] e100 0000:00:0a.0: restoring config space at offset 0x1 (was
0x2900003, writing 0x2900007)
[ 133.223557] e100 0000:00:0a.0: wake-up capability disabled by ACPI
[ 133.223571] e100 0000:00:0a.0: PME# disabled
[ 133.223650] yenta_cardbus 0000:00:10.0: restoring config space at offset
0x6 (was 0x50200, writing 0xb0050200)
[ 133.287090] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out
[ 133.287100] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out
[ 133.300679] ata1.00: configured for UDMA/33
[ 133.301152] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0
GB/18.6 GiB)
[ 133.301277] sd 0:0:0:0: [sda] Write Protect is off
[ 133.301287] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 133.301481] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 133.543981] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out
[ 133.543991] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out
[ 133.550553] ata2.00: configured for UDMA/33
[ 134.206816] pci 0000:00:12.0: PME# disabled
[ 134.206847] pci 0000:01:00.0: PME# disabled
[ 134.212275] sd 0:0:0:0: [sda] Starting disk
[ 135.540727] eth1: Attempting to download firmware agere_sta_fw.bin
[ 135.540762] hermes_dld: AUX enable returned 0
[ 135.541780] hermes_dld: AUX disable returned 0
[ 135.541786] hermes_dld: Actual PDA length 998, Max allowed 1000
[ 135.541793] eth1: Read PDA returned 0
[ 135.623956] hermes_dld: AUX enable returned 0
[ 135.623963] hermes_dld: Enabling volatile, EP 0x000f8000
[ 135.625086] hermes_dld: PROGRAM_ENABLE returned 0
[ 135.625092] eth1: Program init returned 0
[ 135.625100] hermes_dld: Programming block of length 60416 to address
0x001f0000
[ 135.673296] hermes_dld: Programming block of length 4096 to address
0x001ef000
[ 135.676579] eth1: Program returned 0
[ 135.676587] hermes_dld: Found record 0x0003 at debe8c1c
[ 135.676607] hermes_dld: Found record 0x0005 at debe8ca8
[ 135.676624] hermes_dld: Found record 0x0008 at debe8cd2
[ 135.676639] hermes_dld: Found record 0x0007 at debe8cc4
[ 135.676656] hermes_dld: Found record 0x0006 at debe8cb6
[ 135.676721] hermes_dld: Found record 0x0110 at debe8d9a
[ 135.676753] hermes_dld: Found record 0x0120 at debe8dba
[ 135.676784] hermes_dld: Found record 0x0130 at debe8dda
[ 135.676815] hermes_dld: Found record 0x0140 at debe8dfa
[ 135.676827] hermes_dld: Found record 0x0150 at debe8e02
[ 135.676838] hermes_dld: Using default record 0x0160 at dfabfb60
[ 135.676869] hermes_dld: Found record 0x0101 at debe8d46
[ 135.676883] hermes_dld: Found record 0x0103 at debe8d5c
[ 135.676901] hermes_dld: Found record 0x0104 at debe8d6c
[ 135.676911] hermes_dld: Found record 0x0105 at debe8d72
[ 135.676922] hermes_dld: Found record 0x0105 at debe8d72
[ 135.676933] hermes_dld: Found record 0x0105 at debe8d72
[ 135.676943] hermes_dld: Found record 0x0107 at debe8d7e
[ 135.676954] hermes_dld: Found record 0x0109 at debe8d8c
[ 135.676970] hermes_dld: Using default record 0x0161 at dfabfb80
[ 135.677184] eth1: Apply PDA returned 0
[ 135.677247] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000,
r2 0x0000
[ 135.677274] hermes_dld: AUX disable returned 0
[ 135.687916] eth1: Program end returned 0
[ 135.687923] eth1: hermes_present returned 1
[ 135.699834] Restarting tasks ... done.
[ 136.042850] eth1: New link status: Connected (0001)
Download attachment "signature.asc " of type "application/pgp-signature" (198 bytes)
Powered by blists - more mailing lists