Linux version 2.6.29-rc2 (hugh@empty) (gcc version 4.2.1 (SUSE Linux)) #1 SMP Mon Jan 19 01:01:13 GMT 2009 Command line: root=/dev/sda2 vga=0x317 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfe8ac00 (usable) BIOS-e820: 00000000bfe8ac00 - 00000000bfe8cc00 (ACPI NVS) BIOS-e820: 00000000bfe8cc00 - 00000000bfe8ec00 (ACPI data) BIOS-e820: 00000000bfe8ec00 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000013c000000 (usable) DMI 2.3 present. last_pfn = 0x13c000 max_arch_pfn = 0x100000000 last_pfn = 0xbfe8a max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000bfe8a000 0000000000 - 00bfe00000 page 2M 00bfe00000 - 00bfe8a000 page 4k kernel direct mapping tables up to bfe8a000 @ 8000-d000 last_map_addr: bfe8a000 end: bfe8a000 init_memory_mapping: 0000000100000000-000000013c000000 0100000000 - 013c000000 page 2M kernel direct mapping tables up to 13c000000 @ b000-11000 last_map_addr: 13c000000 end: 13c000000 ACPI: RSDP 000FEC30, 0014 (r0 DELL ) ACPI: RSDT 000FCB6F, 0040 (r1 DELL WS 670 7 ASL 61) ACPI: FACP 000FCBC3, 0074 (r1 DELL WS 670 7 ASL 61) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT FFFD7CA0, 30AE (r1 DELL dt_ex 1000 MSFT 100000D) ACPI: FACS BFE8AC00, 0040 ACPI: SSDT FFFDAD4E, 00A7 (r1 DELL st_ex 1000 MSFT 100000D) ACPI: APIC 000FCC37, 008A (r1 DELL WS 670 7 ASL 61) ACPI: BOOT 000FCCC1, 0028 (r1 DELL WS 670 7 ASL 61) ACPI: ASF! 000FCCE9, 0067 (r16 DELL WS 670 7 ASL 61) ACPI: MCFG 000FCD50, 003E (r1 DELL WS 670 7 ASL 61) ACPI: HPET 000FCD8E, 0038 (r1 DELL WS 670 7 ASL 61) ACPI: Local APIC address 0xfee00000 (6 early reservations) ==> bootmem [0000000000 - 013c000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000717938] TEXT DATA BSS ==> [0000200000 - 0000717938] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #5 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] found SMP MP-table at [ffff8800000fe710] 000fe710 [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0013c000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x000000a0 0: 0x00000100 -> 0x000bfe8a 0: 0x00100000 -> 0x0013c000 On node 0 totalpages: 1031722 DMA zone: 56 pages used for memmap DMA zone: 1408 pages reserved DMA zone: 2536 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767682 pages, LIFO batch:31 Normal zone: 3360 pages used for memmap Normal zone: 242400 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 0, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[48]) IOAPIC[2]: apic_id 10, version 0, address 0xfec80800, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Allocating 36864 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1012618 Kernel command line: root=/dev/sda2 vga=0x317 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2793.161 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) allocated 52428800 bytes of page_cgroup please try cgroup_disable=memory option if you don't want Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 3925488k/5177344k available (3038k kernel code, 1050456k absent, 200576k reserved, 1278k data, 332k init) hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.32 BogoMIPS (lpj=11172644) kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys memory CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) ACPI: Core revision 20081204 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01 Booting processor 1 APIC 0x6 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.07 BogoMIPS (lpj=11172141) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x1 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5586.05 BogoMIPS (lpj=11172115) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU2: Thermal monitoring enabled (TM1) CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01 checking TSC synchronization [CPU#1 -> CPU#2]: passed. Booting processor 3 APIC 0x7 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5586.06 BogoMIPS (lpj=11172132) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU3: Thermal monitoring enabled (TM1) CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01 checking TSC synchronization [CPU#2 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (22344.51 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0,2 level SIBLING groups: 0 2 domain 1: span 0-3 level CPU groups: 0,2 1,3 CPU1 attaching sched-domain: domain 0: span 1,3 level SIBLING groups: 1 3 domain 1: span 0-3 level CPU groups: 1,3 0,2 CPU2 attaching sched-domain: domain 0: span 0,2 level SIBLING groups: 2 0 domain 1: span 0-3 level CPU groups: 0,2 1,3 CPU3 attaching sched-domain: domain 0: span 1,3 level SIBLING groups: 3 1 domain 1: span 0-3 level CPU groups: 1,3 0,2 net_namespace: 560 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:1f.1: reg 24 32bit mmio: [0xdffffc00-0xdfffffff] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33] pci 0000:00:1f.2: reg 20 io port: [0xfea0-0xfeaf] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff] pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.2: PXH quirk detected; SHPC device MSI disabled pci 0000:01:00.2: PME# supported from D0 D3hot D3cold pci 0000:01:00.2: PME# disabled pci 0000:00:02.0: bridge io port: [0xd000-0xdfff] pci 0000:00:02.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff] pci 0000:03:0e.0: reg 10 64bit mmio: [0xdfee0000-0xdfefffff] pci 0000:03:0e.0: reg 20 io port: [0xdcc0-0xdcff] pci 0000:03:0e.0: PME# supported from D0 D3hot D3cold pci 0000:03:0e.0: PME# disabled pci 0000:01:00.2: bridge io port: [0xd000-0xdfff] pci 0000:01:00.2: bridge 32bit mmio: [0xdfe00000-0xdfefffff] pci 0000:00:03.0: bridge 32bit mmio: [0xdfd00000-0xdfdfffff] pci 0000:05:00.0: reg 10 32bit mmio: [0xdd000000-0xddffffff] pci 0000:05:00.0: reg 14 32bit mmio: [0xc0000000-0xcfffffff] pci 0000:05:00.0: reg 18 32bit mmio: [0xde000000-0xdeffffff] pci 0000:05:00.0: reg 30 32bit mmio: [0xdfc00000-0xdfc1ffff] pci 0000:00:04.0: bridge 32bit mmio: [0xdd000000-0xdfcfffff] pci 0000:00:04.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0xc00-0xc7f has been reserved pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 pci 0000:01:00.0: IO window: disabled pci 0000:01:00.0: MEM window: disabled pci 0000:01:00.0: PREFETCH window: disabled pci 0000:01:00.2: PCI bridge, secondary bus 0000:03 pci 0000:01:00.2: IO window: 0xd000-0xdfff pci 0000:01:00.2: MEM window: 0xdfe00000-0xdfefffff pci 0000:01:00.2: PREFETCH window: disabled pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0xd000-0xdfff pci 0000:00:02.0: MEM window: 0xdfe00000-0xdfefffff pci 0000:00:02.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:04 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: 0xdfd00000-0xdfdfffff pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:04.0: PCI bridge, secondary bus 0000:05 pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: 0xdd000000-0xdfcfffff pci 0000:00:04.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:01:00.0: setting latency timer to 64 pci 0000:01:00.2: setting latency timer to 64 pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff] pci_bus 0000:01: resource 2 mem: [0x0-0x0] pci_bus 0000:01: resource 3 mem: [0x0-0x0] pci_bus 0000:02: resource 0 mem: [0x0-0x0] pci_bus 0000:02: resource 1 mem: [0x0-0x0] pci_bus 0000:02: resource 2 mem: [0x0-0x0] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] pci_bus 0000:03: resource 1 mem: [0xdfe00000-0xdfefffff] pci_bus 0000:03: resource 2 mem: [0x0-0x0] pci_bus 0000:03: resource 3 mem: [0x0-0x0] pci_bus 0000:04: resource 0 mem: [0x0-0x0] pci_bus 0000:04: resource 1 mem: [0xdfd00000-0xdfdfffff] pci_bus 0000:04: resource 2 mem: [0x0-0x0] pci_bus 0000:04: resource 3 mem: [0x0-0x0] pci_bus 0000:05: resource 0 mem: [0x0-0x0] pci_bus 0000:05: resource 1 mem: [0xdd000000-0xdfcfffff] pci_bus 0000:05: resource 2 mem: [0xc0000000-0xcfffffff] pci_bus 0000:05: resource 3 mem: [0x0-0x0] pci_bus 0000:06: resource 0 mem: [0x0-0x0] pci_bus 0000:06: resource 1 mem: [0x0-0x0] pci_bus 0000:06: resource 2 mem: [0x0-0x0] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag value 0x87 read from CMOS RAM was invalid Simple Boot Flag at 0x7a set to 0x1 Microcode Update Driver: v2.00 , Peter Oruba HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7668 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:05:00.0: Boot video device vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000080000, using 3072k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12b Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000 0000:03:0e.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48 e1000: 0000:03:0e.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:11:43:17:8b:45 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata1: port disabled. ignoring. ata2.00: ATAPI: GCR-8483B, 1.07, max UDMA/33 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8483B 1.07 PQ: 0 ANSI: 5 ata2.00: qc timeout (cmd 0xa0) ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata2.00: status: { DRDY ERR } ata2: soft resetting link ata2.00: configured for UDMA/33 ata2: EH complete sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18 ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18 ata3.00: ATA-6: ST340014AS, 8.12, max UDMA/133 ata3.00: 78125000 sectors, multi 8: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA ST340014AS 8.12 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 78125000 512-byte hardware sectors: (40.0 GB/37.2 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 78125000 512-byte hardware sectors: (40.0 GB/37.2 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > sd 2:0:0:0: [sda] Attached SCSI disk ata4.00: ATA-6: ST340014AS, 8.12, max UDMA/133 ata4.00: 78125000 sectors, multi 8: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA ST340014AS 8.12 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 78125000 512-byte hardware sectors: (40.0 GB/37.2 GiB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 78125000 512-byte hardware sectors: (40.0 GB/37.2 GiB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 > sd 3:0:0:0: [sdb] Attached SCSI disk slram: not enough parameters. PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:2. Freeing unused kernel memory: 332k freed ata2.00: qc timeout (cmd 0xa0) ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata2.00: status: { DRDY ERR } ata2: soft resetting link ata2.00: configured for UDMA/33 ata2: EH complete ata2.00: qc timeout (cmd 0xa0) ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata2.00: status: { DRDY ERR } ata2: soft resetting link ata2.00: configured for UDMA/33 ata2: EH complete swap_cgroup: uses 6032 bytes of vmalloc for pointer array space and 3088384 bytes to hold mem_cgroup pointers on swap swap_cgroup can be disabled by noswapaccount boot option. Adding 1542200k swap on /dev/sdb1. Priority:-1 extents:1 across:1542200k EXT3 FS on sda2, internal journal kjournald starting. Commit interval 60 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. microcode: CPU0 updated from revision 0x9 to 0x17, date = 2005-04-22 microcode: CPU1 updated from revision 0x9 to 0x17, date = 2005-04-22 microcode: CPU2 updated from revision 0x9 to 0x17, date = 2005-04-22 microcode: CPU3 updated from revision 0x9 to 0x17, date = 2005-04-22 e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ata2.00: qc timeout (cmd 0xa0) ata2.00: limiting speed to UDMA/25:PIO4 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata2.00: status: { DRDY ERR } ata2: soft resetting link ata2.00: configured for UDMA/25 ata2: EH complete ata2.00: qc timeout (cmd 0xa0) ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata2.00: status: { DRDY ERR } ata2: soft resetting link ata2.00: configured for UDMA/25 ata2: EH complete