linux-kernel - What happened to this NIC? Any ideas?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-id: <20090124192450.GA4721@tatooine.rebelbase.local>
Date:	Sat, 24 Jan 2009 20:24:51 +0100
From:	markus reichelt <ml@...eichelt.de>
To:	linux-net@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org
Subject: What happened to this NIC? Any ideas?

Hi,

I had fun with a remote system (custom vanilla kernel 2.6.24.4), a
NIC sort-of died all of a sudden.

(note: eth4 is udev's idea, not mine - the box has just 2 NICs).

/var/log/messages:
Jan 19 09:25:59 A kernel: NETDEV WATCHDOG: eth4: transmit timed out
Jan 19 09:26:02 A kernel: eth4: link up, 100Mbps, full-duplex, lpa 0xFFFF
Jan 19 09:26:11 A kernel: NETDEV WATCHDOG: eth4: transmit timed out
Jan 19 09:26:14 A kernel: eth4: link up, 100Mbps, full-duplex, lpa 0xFFFF
[goes on for 8 more minutes]

/var/log/debug:
Jan 19 09:26:02 A kernel: eth4: Transmit timeout, status ff ffff ffff media ff.
Jan 19 09:26:02 A kernel: eth4: Tx queue start entry 73297348  dirty entry 73297344.
Jan 19 09:26:02 A kernel: eth4:  Tx descriptor 0 is ffffffff. (queue head)
Jan 19 09:26:02 A kernel: eth4:  Tx descriptor 1 is ffffffff.
Jan 19 09:26:02 A kernel: eth4:  Tx descriptor 2 is ffffffff.
Jan 19 09:26:02 A kernel: eth4:  Tx descriptor 3 is ffffffff.
Jan 19 09:26:14 A kernel: eth4: Transmit timeout, status ff ffff ffff media ff.
Jan 19 09:26:14 A kernel: eth4: Tx queue start entry 4  dirty entry 0.
Jan 19 09:26:14 A kernel: eth4:  Tx descriptor 0 is ffffffff. (queue head)
Jan 19 09:26:14 A kernel: eth4:  Tx descriptor 1 is ffffffff.
Jan 19 09:26:14 A kernel: eth4:  Tx descriptor 2 is ffffffff.
Jan 19 09:26:14 A kernel: eth4:  Tx descriptor 3 is ffffffff.
[goes on for 8 more minutes]

(FWIW, there also was a BUG with trace info via dmesg but I did not
save that info, nor did it show up in any logfile, doh)

System was rebooted but instead of getting rid of the problem, it
showed eth4 was not usable anymore. It did not show up in dmesg/via
ifconfig and the corresponding lspci -vvv entry states:

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
        Unknown device 8119 (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. Unknown device 8119
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
        VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
        >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
        Latency: 32 (16000ns max)
        Interrupt: pin A routed to IRQ 12
        Region 0: I/O ports at a400 [size=256]
        Region 1: Memory at d5800000 (32-bit, non-prefetchable)
        [size=256]
        [virtual] Expansion ROM at 30000000 [disabled] [size=64K]
        Capabilities: [50] Power Management version 2
         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
                PME(D0-,D1+,D2+,D3hot+,D3cold+)
         Status: D0 PME-Enable- DSel=0 DScale=0 PME-

I replaced the NIC and everything works as expected:

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
        RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Allied Telesyn International AT-2500TX/ACPI
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
        ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
        >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 12
        Region 0: I/O ports at a400 [size=256]
        Region 1: Memory at d5800000 (32-bit, non-prefetchable)
        [size=256]
        Capabilities: [50] Power Management version 2
         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
                PME(D0+,D1+,D2+,D3hot+,D3cold+)
         Status: D0 PME-Enable- DSel=0 DScale=0 PME+
        Kernel driver in use: 8139too
        Kernel modules: 8139too, 8139cp

Just for the fun of it, I plugged the faulty NIC into a sole win
machine, it worked. Doesn't work in the linux machine afterwards,
though. First time that I observe such strange behaviour, any ideas
what could be the cause?

-- 
left blank, right bald

Content of type "application/pgp-signature" skipped