| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <12328772954069-git-send-email-jayakumar.lkml@gmail.com>
Date: Sun, 25 Jan 2009 17:54:48 +0800
From: Jaya Kumar <jayakumar.lkml@...il.com>
To: jayakumar.lkml@...il.com
Cc: David Brownell <david-b@...bell.net>,
Eric Miao <eric.miao@...vell.com>,
Paulius Zaleckas <paulius.zaleckas@...tonika.lt>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Sam Ravnborg <sam@...nborg.org>,
linux-arm-kernel@...ts.arm.linux.org.uk,
linux-fbdev-devel@...ts.sourceforge.net,
linux-kernel@...r.kernel.org, linux-embedded@...r.kernel.org,
Jaya Kumar <jayakumar.lkml@...il.com>
Subject: [RFC 2.6.28 2/3] mach-pxa: gpio add batch set/get
This patch adds support for pxa specific batch set/get of gpio. This
is exported to gpiolib via the gpio_chip interface. The API used
conforms with the gpiolib batch set/get API described in
Documentation/gpio.txt.
Cc: David Brownell <david-b@...bell.net>
Cc: Eric Miao <eric.miao@...vell.com>
Cc: Paulius Zaleckas <paulius.zaleckas@...tonika.lt>
Cc: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: Sam Ravnborg <sam@...nborg.org>
Cc: linux-arm-kernel@...ts.arm.linux.org.uk
Cc: linux-fbdev-devel@...ts.sourceforge.net
Cc: linux-kernel@...r.kernel.org
Cc: linux-embedded@...r.kernel.org
Signed-off-by: Jaya Kumar <jayakumar.lkml@...il.com>
---
arch/arm/mach-pxa/Kconfig | 1 +
arch/arm/mach-pxa/gpio.c | 63 +++++++++++++++++++++++++++++++++
arch/arm/mach-pxa/include/mach/gpio.h | 51 ++++++++++++++++++++++++++
3 files changed, 115 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f844425..1b3e631 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -41,6 +41,7 @@ config GUMSTIX_AM200EPD
bool "Enable AM200EPD board support"
config GUMSTIX_AM300EPD
+ select GPIOLIB_BATCH
bool "Enable AM300EPD board support"
endchoice
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 5fec1e4..0e466e2 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -162,6 +162,67 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
__raw_writel(mask, pxa->regbase + GPCR_OFFSET);
}
+#ifdef CONFIG_GPIOLIB_BATCH
+/*
+ * Set output GPIO level in batches
+ */
+static int pxa_gpio_set_batch(struct gpio_chip *chip, unsigned startpin,
+ u32 mask, int width, u32 values)
+{
+ struct pxa_gpio_chip *pxa;
+
+ /* we're guaranteed by the caller that startpin + mask remains
+ * in this chip.
+ */
+ pxa = container_of(chip, struct pxa_gpio_chip, chip);
+
+ /* mask is used twice in shifted form */
+ mask <<= startpin;
+
+ values = (values << startpin) & mask;
+ if (values)
+ __raw_writel(values, pxa->regbase + GPSR_OFFSET);
+
+ values = ~values & mask;
+ if (values)
+ __raw_writel(values, pxa->regbase + GPCR_OFFSET);
+
+ return 0;
+}
+
+/*
+ * Get output GPIO level in batches
+ */
+static int pxa_gpio_get_batch(struct gpio_chip *chip, unsigned startpin,
+ u32 mask, int width, u32 *result)
+{
+ u32 values;
+ struct pxa_gpio_chip *pxa;
+
+ /* we're guaranteed by the caller that startpin + mask remains
+ * in this chip.
+ */
+ pxa = container_of(chip, struct pxa_gpio_chip, chip);
+
+ values = __raw_readl(pxa->regbase + GPLR_OFFSET);
+
+ /* shift the result back into original position */
+ *result = (values >> startpin) & mask;
+ return 0;
+}
+#endif
+
+/* this is done this way so that we can insert an ifdef-able value
+ * into the following GPIO_CHIP macro
+ */
+#ifdef CONFIG_GPIOLIB_BATCH
+#define SET_BATCH_MACRO .set_batch = pxa_gpio_set_batch,
+#define GET_BATCH_MACRO .get_batch = pxa_gpio_get_batch,
+#else
+#define SET_BATCH_MACRO
+#define GET_BATCH_MACRO
+#endif
+
#define GPIO_CHIP(_n) \
[_n] = { \
.regbase = GPIO##_n##_BASE, \
@@ -173,6 +234,8 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
.set = pxa_gpio_set, \
.base = (_n) * 32, \
.ngpio = 32, \
+ SET_BATCH_MACRO \
+ GET_BATCH_MACRO \
}, \
}
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 2c538d8..7fa84fe 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -24,6 +24,7 @@
#ifndef __ASM_ARCH_PXA_GPIO_H
#define __ASM_ARCH_PXA_GPIO_H
+#include <linux/bitops.h>
#include <mach/pxa-regs.h>
#include <asm/irq.h>
#include <mach/hardware.h>
@@ -56,6 +57,56 @@ static inline void gpio_set_value(unsigned gpio, int value)
}
}
+#ifdef CONFIG_GPIOLIB_BATCH
+static inline int gpio_set_batch(unsigned startpin, u32 mask, u32 values)
+{
+ int err = 0;
+ int width = fls(mask);
+
+ if (__builtin_constant_p(startpin) &&
+ (startpin + width < NR_BUILTIN_GPIO) &&
+ ((startpin + width) <= roundup(startpin + 1, 32))) {
+ int shift;
+
+ shift = startpin % 32;
+ mask <<= shift;
+
+ values = (values << shift) & mask;
+ if (values)
+ GPSR(startpin) = values;
+
+ values = ~values & mask;
+ if (values)
+ GPCR(startpin) = values;
+ } else {
+ err = __gpio_set_batch(startpin, mask, width, values);
+ }
+ return err;
+}
+
+static inline int gpio_get_batch(unsigned startpin, u32 mask, u32 *result)
+{
+ int ret = 0;
+ int width = fls(mask);
+
+ if (__builtin_constant_p(startpin) &&
+ (startpin + width < NR_BUILTIN_GPIO) &&
+ ((startpin + width) <= roundup(startpin+1, 32))) {
+ int shift;
+ u32 values;
+
+ shift = startpin % 32;
+
+ values = GPLR(startpin);
+
+ *result = (values >> shift) & mask;
+ } else {
+ ret = __gpio_get_batch(startpin, mask, width, result);
+ }
+ return ret;
+}
+#endif
+
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
--
1.5.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists