[ 0.000000] BIOS EBDA/lowmem at: 0009d800/0009d800 [ 0.000000] Linux version 2.6.28-rc8 (root@anubis) (gcc version 4.3.3 20081210 (prerelease) (Ubuntu 4.3.2-2ubuntu8) ) #46 SMP Tue Dec 16 19:44:41 CET 2008 [ 0.000000] Command line: root=/dev/sda2 ro resume=/dev/sda3 no_console_suspend [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d6b0000 (usable) [ 0.000000] BIOS-e820: 000000007d6b0000 - 000000007d6cc000 (ACPI data) [ 0.000000] BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007d700000 - 000000007e000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7d6b0 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping: 0000000000000000-000000007d6b0000 [ 0.000000] 0000000000 - 007d600000 page 2M [ 0.000000] 007d600000 - 007d6b0000 page 4k [ 0.000000] kernel direct mapping tables up to 7d6b0000 @ 8000-c000 [ 0.000000] last_map_addr: 7d6b0000 end: 7d6b0000 [ 0.000000] ACPI: RSDP 000F68D0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 7D6BB731, 0094 (r1 LENOVO TP-7L 2100 LTP 0) [ 0.000000] ACPI: FACP 7D6BB800, 00F4 (r3 LENOVO TP-7L 2100 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0460): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080926] [ 0.000000] ACPI: DSDT 7D6BBC1D, FF1F (r1 LENOVO TP-7L 2100 MSFT 3000000) [ 0.000000] ACPI: FACS 7D6E4000, 0040 [ 0.000000] ACPI: SSDT 7D6BB9B4, 0269 (r1 LENOVO TP-7L 2100 MSFT 3000000) [ 0.000000] ACPI: ECDT 7D6CBB3C, 0052 (r1 LENOVO TP-7L 2100 LNVO 1) [ 0.000000] ACPI: TCPA 7D6CBB8E, 0032 (r2 LENOVO TP-7L 2100 LNVO 1) [ 0.000000] ACPI: APIC 7D6CBBC0, 0068 (r1 LENOVO TP-7L 2100 LNVO 1) [ 0.000000] ACPI: MCFG 7D6CBC28, 003C (r1 LENOVO TP-7L 2100 LNVO 1) [ 0.000000] ACPI: HPET 7D6CBC64, 0038 (r1 LENOVO TP-7L 2100 LNVO 1) [ 0.000000] ACPI: SLIC 7D6CBDF0, 0176 (r1 LENOVO TP-7L 2100 LTP 0) [ 0.000000] ACPI: BOOT 7D6CBF66, 0028 (r1 LENOVO TP-7L 2100 LTP 1) [ 0.000000] ACPI: ASF! 7D6CBF8E, 0072 (r16 LENOVO TP-7L 2100 PTL 1) [ 0.000000] ACPI: SSDT 7D6E271B, 025F (r1 LENOVO TP-7L 2100 INTL 20050513) [ 0.000000] ACPI: SSDT 7D6E297A, 00A6 (r1 LENOVO TP-7L 2100 INTL 20050513) [ 0.000000] ACPI: SSDT 7D6E2A20, 04F7 (r1 LENOVO TP-7L 2100 INTL 20050513) [ 0.000000] ACPI: SSDT 7D6E2F17, 01D8 (r1 LENOVO TP-7L 2100 INTL 20050513) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61 [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 007d6b0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00007f38a8] TEXT DATA BSS ==> [0000200000 - 00007f38a8] [ 0.000000] #3 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] [ 0.000000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007d6b0 [ 0.000000] On node 0 totalpages: 513613 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1626 pages reserved [ 0.000000] DMA zone: 2315 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6968 pages used for memmap [ 0.000000] DMA32 zone: 502648 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000) [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504963 [ 0.000000] Kernel command line: root=/dev/sda2 ro resume=/dev/sda3 no_console_suspend [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2393.812 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.003333] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] Memory: 2015872k/2054848k available (3285k kernel code, 396k absent, 38088k reserved, 1701k data, 324k init) [ 0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.003333] hpet clockevent registered [ 0.003333] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.10 BogoMIPS (lpj=7979373) [ 0.003333] Mount-cache hash table entries: 256 [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 4096K [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 0 [ 0.003333] CPU0: Thermal monitoring enabled (TM2) [ 0.003333] using mwait in idle threads. [ 0.003333] ACPI: Core revision 20080926 [ 0.020050] Setting APIC routing to flat [ 0.020472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.054471] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0a [ 0.056666] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 4789.49 BogoMIPS (lpj=7979984) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 4096K [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] CPU1: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.147920] CPU1: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0a [ 0.148163] checking TSC synchronization [CPU#0 -> CPU#1]: [ 0.149999] Measured 436464 cycles TSC warp between CPUs, turning off TSC clock. [ 0.149999] Marking TSC unstable due to check_tsc_sync_source failed [ 0.150017] Brought up 2 CPUs [ 0.150039] Total of 2 processors activated (9579.59 BogoMIPS). [ 0.150136] net_namespace: 944 bytes [ 0.150148] regulator: core version 0.5 [ 0.150148] NET: Registered protocol family 16 [ 0.150148] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.150148] ACPI: bus type pci registered [ 0.150148] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.150148] PCI: MCFG area at f0000000 reserved in E820 [ 0.154196] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.154220] PCI: Using configuration type 1 for base access [ 0.157117] ACPI: EC: EC description table is found, configuring boot EC [ 0.163310] ACPI: BIOS _OSI(Linux) query honored via DMI [ 0.163353] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.175371] ACPI: Interpreter enabled [ 0.175393] ACPI: (supports S0 S3 S4 S5) [ 0.175455] ACPI: Using IOAPIC for interrupt routing [ 0.190345] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 [ 0.190345] ACPI: EC: driver started in interrupt mode [ 0.191240] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.191273] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.191381] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff] [ 0.191387] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] [ 0.191390] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.191417] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff] [ 0.191548] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff] [ 0.191557] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe025000-0xfe025fff] [ 0.191565] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] [ 0.191642] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.191672] pci 0000:00:19.0: PME# disabled [ 0.191817] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] [ 0.191945] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] [ 0.192069] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff] [ 0.192175] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.192207] pci 0000:00:1a.7: PME# disabled [ 0.192336] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe020000-0xfe023fff] [ 0.192378] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.192407] pci 0000:00:1b.0: PME# disabled [ 0.192529] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.192558] pci 0000:00:1c.0: PME# disabled [ 0.192688] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.192717] pci 0000:00:1c.1: PME# disabled [ 0.192847] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.192878] pci 0000:00:1c.2: PME# disabled [ 0.193390] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.193419] pci 0000:00:1c.3: PME# disabled [ 0.193526] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.193557] pci 0000:00:1c.4: PME# disabled [ 0.193717] pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf] [ 0.193857] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df] [ 0.194000] pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff] [ 0.194143] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff] [ 0.194236] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.194266] pci 0000:00:1d.7: PME# disabled [ 0.194495] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.194535] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.194622] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.194635] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.194649] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.194662] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.194676] pci 0000:00:1f.1: reg 20 io port: [0x1c00-0x1c0f] [ 0.194766] pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57] [ 0.194775] pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47] [ 0.194783] pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f] [ 0.194792] pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43] [ 0.194800] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f] [ 0.194809] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff] [ 0.194830] pci 0000:00:1f.2: PME# supported from D3hot [ 0.194858] pci 0000:00:1f.2: PME# disabled [ 0.194923] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff] [ 0.194947] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f] [ 0.195068] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.195074] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] [ 0.195089] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff] [ 0.195217] pci 0000:03:00.0: reg 10 64bit mmio: [0xdf3fe000-0xdf3fffff] [ 0.195305] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.195358] pci 0000:03:00.0: PME# disabled [ 0.195476] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.195482] pci 0000:00:1c.1: bridge 32bit mmio: [0xdc000000-0xdf3fffff] [ 0.195490] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff] [ 0.195560] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] [ 0.195568] pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff] [ 0.195577] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfb00000-0xdfbfffff] [ 0.195640] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] [ 0.195646] pci 0000:00:1c.3: bridge 32bit mmio: [0xd4000000-0xd5ffffff] [ 0.195655] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff] [ 0.195720] pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff] [ 0.195726] pci 0000:00:1c.4: bridge 32bit mmio: [0xd0000000-0xd1ffffff] [ 0.195735] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf500000-0xdf5fffff] [ 0.195809] pci 0000:15:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff] [ 0.195831] pci 0000:15:00.0: supports D1 D2 [ 0.195832] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195865] pci 0000:15:00.0: PME# disabled [ 0.195957] pci 0000:15:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff] [ 0.196034] pci 0000:15:00.1: supports D1 D2 [ 0.196035] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196667] pci 0000:15:00.1: PME# disabled [ 0.196759] pci 0000:15:00.2: reg 10 32bit mmio: [0xf8301800-0xf83018ff] [ 0.196837] pci 0000:15:00.2: supports D1 D2 [ 0.196838] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196868] pci 0000:15:00.2: PME# disabled [ 0.196958] pci 0000:15:00.3: reg 10 32bit mmio: [0xf8301c00-0xf8301cff] [ 0.197038] pci 0000:15:00.3: supports D1 D2 [ 0.197040] pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.197072] pci 0000:15:00.3: PME# disabled [ 0.197162] pci 0000:15:00.4: reg 10 32bit mmio: [0xf8302000-0xf83020ff] [ 0.197240] pci 0000:15:00.4: supports D1 D2 [ 0.197241] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.197272] pci 0000:15:00.4: PME# disabled [ 0.197364] pci 0000:15:00.5: reg 10 32bit mmio: [0xf8302400-0xf83024ff] [ 0.197443] pci 0000:15:00.5: supports D1 D2 [ 0.197445] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.197475] pci 0000:15:00.5: PME# disabled [ 0.197597] pci 0000:00:1e.0: transparent bridge [ 0.197624] pci 0000:00:1e.0: bridge io port: [0x7000-0xafff] [ 0.197631] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff] [ 0.197639] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.197722] bus 00 -> node 0 [ 0.197728] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.197961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.198086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.198211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.198335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.198461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.198587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.203963] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 0.204259] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.204552] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.204844] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.204844] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.204844] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.204844] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.204844] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.204844] ACPI: Power Resource [PUBS] (on) [ 0.206847] SCSI subsystem initialized [ 0.206847] libata version 3.00 loaded. [ 0.206847] usbcore: registered new interface driver usbfs [ 0.206847] usbcore: registered new interface driver hub [ 0.206847] usbcore: registered new device driver usb [ 0.206847] PCI: Using ACPI for IRQ routing [ 0.216695] PCI-GART: No AMD GART found. [ 0.216726] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.216777] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.223344] Switched to high resolution mode on CPU 0 [ 0.224945] Switched to high resolution mode on CPU 1 [ 0.230845] pnp: PnP ACPI init [ 0.230871] ACPI: bus type pnp registered [ 0.235208] pnp: PnP ACPI: found 11 devices [ 0.235231] ACPI: ACPI bus type pnp unregistered [ 0.235263] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.235289] system 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 0.235314] system 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 0.235340] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 0.235365] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 0.235391] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.235416] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.235442] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.235468] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.235494] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.235520] system 00:00: iomem range 0x100000-0x7dffffff could not be reserved [ 0.235556] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved [ 0.235592] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved [ 0.235631] system 00:02: ioport range 0x164e-0x164f has been reserved [ 0.235657] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.235682] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.235707] system 00:02: ioport range 0x800-0x80f has been reserved [ 0.235732] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.235758] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 0.235784] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.235810] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.235836] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.235862] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.235889] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.235915] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved [ 0.241011] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.241039] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.241069] pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff [ 0.241100] pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff [ 0.241143] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.241171] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.241200] pci 0000:00:1c.1: MEM window: 0xdc000000-0xdf3fffff [ 0.241229] pci 0000:00:1c.1: PREFETCH window: 0x000000dfe00000-0x000000dfefffff [ 0.241272] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.241299] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 0.241328] pci 0000:00:1c.2: MEM window: 0xd8000000-0xd9ffffff [ 0.241357] pci 0000:00:1c.2: PREFETCH window: 0x000000dfb00000-0x000000dfbfffff [ 0.241400] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.241427] pci 0000:00:1c.3: IO window: 0x5000-0x5fff [ 0.241457] pci 0000:00:1c.3: MEM window: 0xd4000000-0xd5ffffff [ 0.241486] pci 0000:00:1c.3: PREFETCH window: 0x000000df800000-0x000000df8fffff [ 0.241536] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d [ 0.241563] pci 0000:00:1c.4: IO window: 0x6000-0x6fff [ 0.241594] pci 0000:00:1c.4: MEM window: 0xd0000000-0xd1ffffff [ 0.241624] pci 0000:00:1c.4: PREFETCH window: 0x000000df500000-0x000000df5fffff [ 0.241670] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 [ 0.241694] pci 0000:15:00.0: IO window: 0x007000-0x0070ff [ 0.241726] pci 0000:15:00.0: IO window: 0x007400-0x0074ff [ 0.241756] pci 0000:15:00.0: PREFETCH window: 0xf4000000-0xf7ffffff [ 0.241786] pci 0000:15:00.0: MEM window: 0x80000000-0x83ffffff [ 0.241816] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 [ 0.241844] pci 0000:00:1e.0: IO window: 0x7000-0xafff [ 0.241875] pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff [ 0.241904] pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff [ 0.241961] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.241994] pci 0000:00:1c.0: setting latency timer to 64 [ 0.242011] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.242040] pci 0000:00:1c.1: setting latency timer to 64 [ 0.242057] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.242088] pci 0000:00:1c.2: setting latency timer to 64 [ 0.242103] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.242133] pci 0000:00:1c.3: setting latency timer to 64 [ 0.242150] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.242181] pci 0000:00:1c.4: setting latency timer to 64 [ 0.242189] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.242222] pci 0000:00:1e.0: setting latency timer to 64 [ 0.242239] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.242272] pci 0000:15:00.0: setting latency timer to 64 [ 0.242278] bus: 00 index 0 io port: [0x00-0xffff] [ 0.242301] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.242327] bus: 02 index 0 io port: [0x2000-0x2fff] [ 0.242350] bus: 02 index 1 mmio: [0xfc000000-0xfdffffff] [ 0.242373] bus: 02 index 2 mmio: [0xf8000000-0xf80fffff] [ 0.242397] bus: 02 index 3 mmio: [0x0-0x0] [ 0.242419] bus: 03 index 0 io port: [0x3000-0x3fff] [ 0.242442] bus: 03 index 1 mmio: [0xdc000000-0xdf3fffff] [ 0.242465] bus: 03 index 2 mmio: [0xdfe00000-0xdfefffff] [ 0.242489] bus: 03 index 3 mmio: [0x0-0x0] [ 0.242511] bus: 04 index 0 io port: [0x4000-0x4fff] [ 0.242533] bus: 04 index 1 mmio: [0xd8000000-0xd9ffffff] [ 0.242557] bus: 04 index 2 mmio: [0xdfb00000-0xdfbfffff] [ 0.242580] bus: 04 index 3 mmio: [0x0-0x0] [ 0.242602] bus: 05 index 0 io port: [0x5000-0x5fff] [ 0.242625] bus: 05 index 1 mmio: [0xd4000000-0xd5ffffff] [ 0.242649] bus: 05 index 2 mmio: [0xdf800000-0xdf8fffff] [ 0.242672] bus: 05 index 3 mmio: [0x0-0x0] [ 0.242694] bus: 0d index 0 io port: [0x6000-0x6fff] [ 0.242717] bus: 0d index 1 mmio: [0xd0000000-0xd1ffffff] [ 0.242740] bus: 0d index 2 mmio: [0xdf500000-0xdf5fffff] [ 0.242764] bus: 0d index 3 mmio: [0x0-0x0] [ 0.242786] bus: 15 index 0 io port: [0x7000-0xafff] [ 0.242809] bus: 15 index 1 mmio: [0xf8300000-0xfbffffff] [ 0.242832] bus: 15 index 2 mmio: [0xf4000000-0xf7ffffff] [ 0.242856] bus: 15 index 3 io port: [0x00-0xffff] [ 0.242879] bus: 15 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.242903] bus: 16 index 0 io port: [0x7000-0x70ff] [ 0.242926] bus: 16 index 1 io port: [0x7400-0x74ff] [ 0.242949] bus: 16 index 2 mmio: [0xf4000000-0xf7ffffff] [ 0.242972] bus: 16 index 3 mmio: [0x80000000-0x83ffffff] [ 0.243001] NET: Registered protocol family 2 [ 0.274210] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.274509] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.276146] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.276779] TCP: Hash tables configured (established 262144 bind 65536) [ 0.276805] TCP reno registered [ 0.284259] NET: Registered protocol family 1 [ 0.284431] Simple Boot Flag at 0x35 set to 0x1 [ 0.287858] msgmni has been set to 3938 [ 0.288047] alg: No test for stdrng (krng) [ 0.288157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.288194] io scheduler noop registered [ 0.288215] io scheduler anticipatory registered [ 0.288238] io scheduler deadline registered [ 0.288310] io scheduler cfq registered (default) [ 0.288342] pci 0000:00:02.0: Boot video device [ 0.288356] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.288357] pci 0000:00:1a.0: Performing full reset [ 0.288383] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.288385] pci 0000:00:1a.1: Performing full reset [ 0.288446] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.288447] pci 0000:00:1d.0: Performing full reset [ 0.288474] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.288475] pci 0000:00:1d.1: Performing full reset [ 0.288501] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.288502] pci 0000:00:1d.2: Performing full reset [ 0.296031] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.296081] pcieport-driver 0000:00:1c.0: found MSI capability [ 0.296148] pcieport-driver 0000:00:1c.0: irq 319 for MSI/MSI-X [ 0.296163] pci_express 0000:00:1c.0:pcie00: allocate port service [ 0.296208] pci_express 0000:00:1c.0:pcie02: allocate port service [ 0.296251] pci_express 0000:00:1c.0:pcie03: allocate port service [ 0.296352] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.296398] pcieport-driver 0000:00:1c.1: found MSI capability [ 0.296463] pcieport-driver 0000:00:1c.1: irq 318 for MSI/MSI-X [ 0.296479] pci_express 0000:00:1c.1:pcie00: allocate port service [ 0.296522] pci_express 0000:00:1c.1:pcie02: allocate port service [ 0.296565] pci_express 0000:00:1c.1:pcie03: allocate port service [ 0.296720] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.296773] pcieport-driver 0000:00:1c.2: found MSI capability [ 0.296828] pcieport-driver 0000:00:1c.2: irq 317 for MSI/MSI-X [ 0.296844] pci_express 0000:00:1c.2:pcie00: allocate port service [ 0.296880] pci_express 0000:00:1c.2:pcie02: allocate port service [ 0.296913] pci_express 0000:00:1c.2:pcie03: allocate port service [ 0.297046] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.297106] pcieport-driver 0000:00:1c.3: found MSI capability [ 0.297161] pcieport-driver 0000:00:1c.3: irq 316 for MSI/MSI-X [ 0.297186] pci_express 0000:00:1c.3:pcie00: allocate port service [ 0.297220] pci_express 0000:00:1c.3:pcie02: allocate port service [ 0.297252] pci_express 0000:00:1c.3:pcie03: allocate port service [ 0.297374] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.297420] pcieport-driver 0000:00:1c.4: found MSI capability [ 0.297475] pcieport-driver 0000:00:1c.4: irq 315 for MSI/MSI-X [ 0.297491] pci_express 0000:00:1c.4:pcie00: allocate port service [ 0.297563] pci_express 0000:00:1c.4:pcie02: allocate port service [ 0.297609] pci_express 0000:00:1c.4:pcie03: allocate port service [ 0.298290] ACPI: AC Adapter [AC] (off-line) [ 0.338362] ACPI: Battery Slot [BAT0] (battery present) [ 0.338513] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.338550] ACPI: Power Button (FF) [PWRF] [ 0.338638] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.339570] ACPI: Lid Switch [LID] [ 0.339662] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.339705] ACPI: Sleep Button (CM) [SLPB] [ 0.344981] acpi device:03: registered as cooling_device0 [ 0.345259] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input3 [ 0.345297] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 0.345886] ACPI: SSDT 7D6E1B32, 0306 (r1 PmRef Cpu0Ist 100 INTL 20050513) [ 0.346461] ACPI: SSDT 7D6E1EBD, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513) [ 0.349409] Monitor-Mwait will be used to enter C-1 state [ 0.349411] Monitor-Mwait will be used to enter C-2 state [ 0.349413] Monitor-Mwait will be used to enter C-3 state [ 0.349459] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.349556] processor ACPI_CPU:00: registered as cooling_device1 [ 0.349581] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.349914] ACPI: SSDT 7D6E1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) [ 0.350334] ACPI: SSDT 7D6E1E38, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) [ 0.352628] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.352706] processor ACPI_CPU:01: registered as cooling_device2 [ 0.352731] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.358425] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.362169] ACPI: Thermal Zone [THM0] (57 C) [ 0.363145] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.364380] ACPI: Thermal Zone [THM1] (50 C) [ 0.419656] Non-volatile memory driver v1.2 [ 0.419682] Linux agpgart interface v0.103 [ 0.419719] Uniform Multi-Platform E-IDE driver [ 0.419805] ide-gd driver 1.18 [ 0.420113] Driver 'sd' needs updating - please use bus_type methods [ 0.420159] Driver 'sr' needs updating - please use bus_type methods [ 0.420253] ahci 0000:00:1f.2: version 3.0 [ 0.420274] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.420352] ahci 0000:00:1f.2: irq 314 for MSI/MSI-X [ 0.420413] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode [ 0.420450] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 0.420493] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.420620] scsi0 : ahci [ 0.420740] scsi1 : ahci [ 0.420866] scsi2 : ahci [ 0.421034] ata1: SATA max UDMA/133 irq_stat 0x00400040 irq 314, connection status changed [ 0.421071] ata2: DUMMY [ 0.421090] ata3: DUMMY [ 1.140031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.140788] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 1.140790] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 1.141298] ata1.00: ATA-8: OCZ CORE_SSD, 02.10104, max UDMA/100 [ 1.141323] ata1.00: 504856576 sectors, multi 0: LBA48 NCQ (not used) [ 1.141351] ata1.00: applying bridge limits [ 1.142417] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 1.142419] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 1.142931] ata1.00: configured for UDMA/100 [ 1.154424] ata1.00: configured for UDMA/100 [ 1.154447] ata1: EH complete [ 1.154588] scsi 0:0:0:0: Direct-Access ATA OCZ CORE_SSD 02.1 PQ: 0 ANSI: 5 [ 1.154762] sd 0:0:0:0: [sda] 504856576 512-byte hardware sectors: (258 GB/240 GiB) [ 1.154807] sd 0:0:0:0: [sda] Write Protect is off [ 1.154830] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.154846] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.154930] sd 0:0:0:0: [sda] 504856576 512-byte hardware sectors: (258 GB/240 GiB) [ 1.154973] sd 0:0:0:0: [sda] Write Protect is off [ 1.154996] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.155011] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.155049] sda: sda1 sda2 sda3 sda4 [ 3.198433] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.198553] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.198683] ata_piix 0000:00:1f.1: version 2.12 [ 3.198692] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 3.198759] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 3.198846] scsi3 : ata_piix [ 3.198971] scsi4 : ata_piix [ 3.199738] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14 [ 3.199764] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15 [ 3.357221] ata4.00: ATAPI: MATSHITADVD-RAM UJ-852, RB02, max UDMA/33 [ 3.370461] ata4.00: configured for UDMA/33 [ 3.370906] ata5: port disabled. ignoring. [ 3.370921] isa bounce pool size: 16 pages [ 3.372830] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852 RB02 PQ: 0 ANSI: 5 [ 3.377246] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.377283] Uniform CD-ROM driver Revision: 3.20 [ 3.377410] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 3.377493] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 3.377718] usbcore: registered new interface driver libusual [ 3.377809] usbcore: registered new interface driver usbserial [ 3.377833] usbserial: USB Serial Driver core [ 3.377885] USB Serial support registered for pl2303 [ 3.377942] usbcore: registered new interface driver pl2303 [ 3.377966] pl2303: Prolific PL2303 USB to serial adaptor driver [ 3.378070] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.387323] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.387348] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.387509] mice: PS/2 mouse device common for all mice [ 3.433543] rtc_cmos 00:07: RTC can wake from S4 [ 3.433633] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 3.433691] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.433755] i2c /dev entries driver [ 3.433872] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.434429] cpuidle: using governor ladder [ 3.435079] cpuidle: using governor menu [ 3.435348] Advanced Linux Sound Architecture Driver Version 1.0.18rc3. [ 3.435753] ALSA device list: [ 3.435775] No soundcards found. [ 3.436031] TCP highspeed registered [ 3.436058] NET: Registered protocol family 17 [ 3.436085] NET: Registered protocol family 15 [ 3.437436] rtc_cmos 00:07: setting system clock to 2009-01-25 11:32:18 UTC (1232883138) [ 3.437606] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 4.000948] Clocksource tsc unstable (delta = -481072483 ns) [ 4.088660] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 4.088706] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 4.128889] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 9.516029] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 9.746697] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 [ 9.948969] EXT3-fs: INFO: recovery required on readonly filesystem. [ 9.948999] EXT3-fs: write access will be enabled during recovery. [ 10.072887] kjournald starting. Commit interval 5 seconds [ 10.072939] EXT3-fs: recovery complete. [ 10.075976] EXT3-fs: mounted filesystem with ordered data mode. [ 10.076016] VFS: Mounted root (ext3 filesystem) readonly. [ 10.076069] Freeing unused kernel memory: 324k freed [ 10.801139] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 10.802114] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 10.805073] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 10.814918] ACPI: WMI: Mapper loaded [ 10.834805] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 10.834834] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 10.834916] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 10.834955] e1000e 0000:00:19.0: setting latency timer to 64 [ 10.835125] e1000e 0000:00:19.0: irq 313 for MSI/MSI-X [ 10.852863] uhci_hcd: USB Universal Host Controller Interface driver [ 10.869701] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.869730] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 10.869767] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 [ 10.886650] cfg80211: Using static regulatory domain info [ 10.886693] cfg80211: Regulatory domain: US [ 10.886715] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.886751] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 10.886776] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 10.886802] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 10.886827] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 10.886852] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 10.886878] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 10.886903] cfg80211: Calling CRDA for country: US [ 10.926622] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] [ 10.937739] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds [ 10.937778] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 10.937913] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.937969] iwlagn 0000:03:00.0: setting latency timer to 64 [ 10.938030] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 10.985883] iwlagn: Tunable channels: 11 802.11bg, 13 802.11a channels [ 10.989354] iwlagn 0000:03:00.0: PCI INT A disabled [ 10.990653] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 11.005421] sdhci: Secure Digital Host Controller Interface driver [ 11.005456] sdhci: Copyright(c) Pierre Ossman [ 11.027309] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 11.053305] thinkpad_acpi: ThinkPad ACPI Extras v0.21 [ 11.053381] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 11.053404] thinkpad_acpi: ThinkPad BIOS 7LETB0WW (2.10 ), EC 7KHT24WW-1.08 [ 11.053431] thinkpad_acpi: Lenovo ThinkPad T61, model 6465CTO [ 11.055348] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 11.055380] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 11.055408] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff [ 11.055448] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff [ 11.055488] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff [ 11.056322] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) [ 11.056389] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 11.056999] thinkpad_acpi: ACPI backlight control delay disabled [ 11.057471] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 11.057589] sdhci-pci 0000:15:00.2: setting latency timer to 64 [ 11.057770] thinkpad_acpi: radio switch found; radios are enabled [ 11.057887] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 11.057927] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 11.058645] Registered led device: mmc0 [ 11.059697] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA [ 11.061073] ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 11.061108] ohci1394 0000:15:00.1: setting latency timer to 64 [ 11.091098] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:6b:d2:bd:81 [ 11.091134] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 11.091785] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff [ 11.092110] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 11.092145] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 11.092150] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 11.092221] drivers/usb/core/inode.c: creating file 'devices' [ 11.092224] drivers/usb/core/inode.c: creating file '001' [ 11.092335] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 11.092379] uhci_hcd 0000:00:1a.0: detected 2 ports [ 11.092407] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 11.092409] uhci_hcd 0000:00:1a.0: Performing full reset [ 11.092426] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 11.092439] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 11.092498] usb usb1: default language 0x0409 [ 11.092534] usb usb1: uevent [ 11.092568] usb usb1: usb_probe_device [ 11.092570] usb usb1: configuration #1 chosen from 1 choice [ 11.092597] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 11.092608] usb 1-0:1.0: uevent [ 11.092638] hub 1-0:1.0: usb_probe_interface [ 11.092640] hub 1-0:1.0: usb_probe_interface - got id [ 11.092641] hub 1-0:1.0: USB hub found [ 11.092667] hub 1-0:1.0: 2 ports detected [ 11.092689] hub 1-0:1.0: standalone hub [ 11.092690] hub 1-0:1.0: no power switching (usb 1.0) [ 11.092691] hub 1-0:1.0: individual port over-current protection [ 11.092693] hub 1-0:1.0: power on to power good time: 2ms [ 11.092696] hub 1-0:1.0: local power source is good [ 11.092698] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 11.092804] drivers/usb/core/inode.c: creating file '001' [ 11.092870] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 11.092896] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.092931] usb usb1: Product: UHCI Host Controller [ 11.092954] usb usb1: Manufacturer: Linux 2.6.28-rc8 uhci_hcd [ 11.092978] usb usb1: SerialNumber: 0000:00:1a.0 [ 11.101922] Registered led device: tpacpi::thinklight [ 11.101989] Registered led device: tpacpi::power [ 11.102041] Registered led device: tpacpi:orange:batt [ 11.102090] Registered led device: tpacpi:green:batt [ 11.102139] Registered led device: tpacpi::dock_active [ 11.102188] Registered led device: tpacpi::bay_active [ 11.102236] Registered led device: tpacpi::dock_batt [ 11.102285] Registered led device: tpacpi::unknown_led [ 11.102336] Registered led device: tpacpi::standby [ 11.105049] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 11.105372] input: ThinkPad Extra Buttons as /devices/virtual/input/input8 [ 11.114262] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 11.118885] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 11.118926] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 11.118979] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 11.118984] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 11.119030] drivers/usb/core/inode.c: creating file '002' [ 11.119107] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2 [ 11.119153] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4 [ 11.119158] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 11.119182] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 11.123093] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 11.123094] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 11.123109] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 [ 11.123137] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 11.127009] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 11.137557] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 11.137617] usb usb2: default language 0x0409 [ 11.137700] usb usb2: uevent [ 11.137741] usb usb2: usb_probe_device [ 11.137743] usb usb2: configuration #1 chosen from 1 choice [ 11.137770] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 11.137781] usb 2-0:1.0: uevent [ 11.137812] hub 2-0:1.0: usb_probe_interface [ 11.137813] hub 2-0:1.0: usb_probe_interface - got id [ 11.137815] hub 2-0:1.0: USB hub found [ 11.137841] hub 2-0:1.0: 4 ports detected [ 11.137863] hub 2-0:1.0: standalone hub [ 11.137864] hub 2-0:1.0: no power switching (usb 1.0) [ 11.137865] hub 2-0:1.0: individual port over-current protection [ 11.137867] hub 2-0:1.0: power on to power good time: 20ms [ 11.137870] hub 2-0:1.0: local power source is good [ 11.137872] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 11.138006] drivers/usb/core/inode.c: creating file '001' [ 11.138061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.138091] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.138132] usb usb2: Product: EHCI Host Controller [ 11.138159] usb usb2: Manufacturer: Linux 2.6.28-rc8 ehci_hcd [ 11.138183] usb usb2: SerialNumber: 0000:00:1a.7 [ 11.138238] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 11.138284] hda_intel: probe_mask set to 0x1 for device 17aa:20ac [ 11.138347] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 11.190528] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 11.190543] uhci_hcd 0000:00:1a.0: port 2 portsc 0082,00 [ 11.237579] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 11.237583] hub 2-0:1.0: port 1: status 0501 change 0001 [ 11.237595] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT [ 11.237597] hub 2-0:1.0: port 2: status 0501 change 0001 [ 11.290128] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 11.337602] hub 2-0:1.0: state 7 ports 4 chg 0006 evt 0000 [ 11.337617] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 11.390414] ehci_hcd 0000:00:1a.7: port 1 full speed --> companion [ 11.390422] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT [ 11.390425] hub 2-0:1.0: port 1 not reset yet, waiting 50ms [ 11.443550] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC [ 11.443590] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 11.497042] ehci_hcd 0000:00:1a.7: port 2 full speed --> companion [ 11.497044] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT [ 11.497047] hub 2-0:1.0: port 2 not reset yet, waiting 50ms [ 11.539759] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 11.539795] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 11.539832] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 11.539837] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 11.539916] drivers/usb/core/inode.c: creating file '003' [ 11.539980] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 11.540049] uhci_hcd 0000:00:1a.1: detected 2 ports [ 11.540077] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 11.540078] uhci_hcd 0000:00:1a.1: Performing full reset [ 11.540097] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 11.540117] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 11.540180] usb usb3: default language 0x0409 [ 11.540215] usb usb3: uevent [ 11.540248] usb usb3: usb_probe_device [ 11.540250] usb usb3: configuration #1 chosen from 1 choice [ 11.540278] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 11.540313] usb 3-0:1.0: uevent [ 11.540351] hub 3-0:1.0: usb_probe_interface [ 11.540352] hub 3-0:1.0: usb_probe_interface - got id [ 11.540354] hub 3-0:1.0: USB hub found [ 11.540381] hub 3-0:1.0: 2 ports detected [ 11.540403] hub 3-0:1.0: standalone hub [ 11.540404] hub 3-0:1.0: no power switching (usb 1.0) [ 11.540405] hub 3-0:1.0: individual port over-current protection [ 11.540407] hub 3-0:1.0: power on to power good time: 2ms [ 11.540410] hub 3-0:1.0: local power source is good [ 11.540411] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 11.540496] drivers/usb/core/inode.c: creating file '001' [ 11.540551] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 11.540577] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.540612] usb usb3: Product: UHCI Host Controller [ 11.540635] usb usb3: Manufacturer: Linux 2.6.28-rc8 uhci_hcd [ 11.540659] usb usb3: SerialNumber: 0000:00:1a.1 [ 11.541116] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 11.541154] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 11.541211] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 11.541216] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 11.541278] drivers/usb/core/inode.c: creating file '004' [ 11.541331] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 11.541373] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 11.541379] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 11.541398] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 11.545307] ehci_hcd 0000:00:1d.7: debug port 1 [ 11.545345] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 11.545347] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 11.545364] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 [ 11.545401] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 11.549281] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 11.550039] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC [ 11.550554] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 [ 11.560075] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 11.560134] usb usb4: default language 0x0409 [ 11.560247] usb usb4: uevent [ 11.560269] usb usb4: usb_probe_device [ 11.560272] usb usb4: configuration #1 chosen from 1 choice [ 11.560325] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 11.560341] usb 4-0:1.0: uevent [ 11.560350] hub 4-0:1.0: usb_probe_interface [ 11.560351] hub 4-0:1.0: usb_probe_interface - got id [ 11.560353] hub 4-0:1.0: USB hub found [ 11.560383] hub 4-0:1.0: 6 ports detected [ 11.560409] hub 4-0:1.0: standalone hub [ 11.560410] hub 4-0:1.0: no power switching (usb 1.0) [ 11.560411] hub 4-0:1.0: individual port over-current protection [ 11.560412] hub 4-0:1.0: power on to power good time: 20ms [ 11.560415] hub 4-0:1.0: local power source is good [ 11.560417] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 11.560494] drivers/usb/core/inode.c: creating file '001' [ 11.560528] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.560559] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.560612] usb usb4: Product: EHCI Host Controller [ 11.560641] usb usb4: Manufacturer: Linux 2.6.28-rc8 ehci_hcd [ 11.560672] usb usb4: SerialNumber: 0000:00:1d.7 [ 11.561409] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 11.561443] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.561480] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 11.561485] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 11.561549] drivers/usb/core/inode.c: creating file '005' [ 11.561646] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 11.561693] uhci_hcd 0000:00:1d.0: detected 2 ports [ 11.561721] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 11.561722] uhci_hcd 0000:00:1d.0: Performing full reset [ 11.561742] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 11.561748] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 11.561804] usb usb5: default language 0x0409 [ 11.561839] usb usb5: uevent [ 11.561870] usb usb5: usb_probe_device [ 11.561872] usb usb5: configuration #1 chosen from 1 choice [ 11.561899] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 11.561914] usb 5-0:1.0: uevent [ 11.561946] hub 5-0:1.0: usb_probe_interface [ 11.561947] hub 5-0:1.0: usb_probe_interface - got id [ 11.561949] hub 5-0:1.0: USB hub found [ 11.561975] hub 5-0:1.0: 2 ports detected [ 11.561997] hub 5-0:1.0: standalone hub [ 11.561998] hub 5-0:1.0: no power switching (usb 1.0) [ 11.562000] hub 5-0:1.0: individual port over-current protection [ 11.562001] hub 5-0:1.0: power on to power good time: 2ms [ 11.562004] hub 5-0:1.0: local power source is good [ 11.562006] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 11.562091] drivers/usb/core/inode.c: creating file '001' [ 11.562167] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 11.562193] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.562229] usb usb5: Product: UHCI Host Controller [ 11.562252] usb usb5: Manufacturer: Linux 2.6.28-rc8 uhci_hcd [ 11.562279] usb usb5: SerialNumber: 0000:00:1d.0 [ 11.562332] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 11.562373] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 11.562378] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 11.562433] drivers/usb/core/inode.c: creating file '006' [ 11.562484] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 11.562525] uhci_hcd 0000:00:1d.1: detected 2 ports [ 11.562553] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 11.562555] uhci_hcd 0000:00:1d.1: Performing full reset [ 11.562573] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 11.562577] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 11.562663] usb usb6: default language 0x0409 [ 11.562698] usb usb6: uevent [ 11.562728] usb usb6: usb_probe_device [ 11.562729] usb usb6: configuration #1 chosen from 1 choice [ 11.562756] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 11.562767] usb 6-0:1.0: uevent [ 11.562795] hub 6-0:1.0: usb_probe_interface [ 11.562796] hub 6-0:1.0: usb_probe_interface - got id [ 11.562798] hub 6-0:1.0: USB hub found [ 11.562823] hub 6-0:1.0: 2 ports detected [ 11.562848] hub 6-0:1.0: standalone hub [ 11.562849] hub 6-0:1.0: no power switching (usb 1.0) [ 11.562850] hub 6-0:1.0: individual port over-current protection [ 11.562851] hub 6-0:1.0: power on to power good time: 2ms [ 11.562854] hub 6-0:1.0: local power source is good [ 11.562856] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 11.562943] drivers/usb/core/inode.c: creating file '001' [ 11.563001] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 11.563027] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.563062] usb usb6: Product: UHCI Host Controller [ 11.563085] usb usb6: Manufacturer: Linux 2.6.28-rc8 uhci_hcd [ 11.563110] usb usb6: SerialNumber: 0000:00:1d.1 [ 11.563187] usb usb2: uevent [ 11.563676] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 11.563711] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 11.563746] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 11.563751] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 11.563808] drivers/usb/core/inode.c: creating file '007' [ 11.563867] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 11.563910] uhci_hcd 0000:00:1d.2: detected 2 ports [ 11.563938] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 11.563939] uhci_hcd 0000:00:1d.2: Performing full reset [ 11.563957] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 11.563962] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 11.564019] usb usb7: default language 0x0409 [ 11.564078] usb usb7: uevent [ 11.564109] usb usb7: usb_probe_device [ 11.564110] usb usb7: configuration #1 chosen from 1 choice [ 11.564137] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 11.564148] usb 7-0:1.0: uevent [ 11.564177] hub 7-0:1.0: usb_probe_interface [ 11.564178] hub 7-0:1.0: usb_probe_interface - got id [ 11.564180] hub 7-0:1.0: USB hub found [ 11.564208] hub 7-0:1.0: 2 ports detected [ 11.564232] hub 7-0:1.0: standalone hub [ 11.564233] hub 7-0:1.0: no power switching (usb 1.0) [ 11.564235] hub 7-0:1.0: individual port over-current protection [ 11.564236] hub 7-0:1.0: power on to power good time: 2ms [ 11.564239] hub 7-0:1.0: local power source is good [ 11.564240] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 11.564330] drivers/usb/core/inode.c: creating file '001' [ 11.564383] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 11.564412] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.564453] usb usb7: Product: UHCI Host Controller [ 11.564476] usb usb7: Manufacturer: Linux 2.6.28-rc8 uhci_hcd [ 11.564502] usb usb7: SerialNumber: 0000:00:1d.2 [ 11.566786] usb usb1: uevent [ 11.589630] usb usb6: uevent [ 11.596858] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0006 [ 11.596872] uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00 [ 11.596884] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 11.601165] usb usb3: uevent [ 11.602347] usb usb5: uevent [ 11.621516] usb usb7: uevent [ 11.657681] usb usb4: uevent [ 11.724227] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 11.830884] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 11.978555] usb 1-1: skipped 1 descriptor after interface [ 11.981539] usb 1-1: default language 0x0409 [ 11.987648] usb 1-1: uevent [ 11.987816] usb 1-1: usb_probe_device [ 11.987818] usb 1-1: configuration #1 chosen from 1 choice [ 11.989543] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 11.989555] usb 1-1:1.0: uevent [ 11.989823] usb 1-1: adding 1-1:1.1 (config #1, interface 1) [ 11.989835] usb 1-1:1.1: uevent [ 11.990003] usb 1-1: adding 1-1:1.2 (config #1, interface 2) [ 11.990014] usb 1-1:1.2: uevent [ 11.990162] usb 1-1: adding 1-1:1.3 (config #1, interface 3) [ 11.990176] usb 1-1:1.3: uevent [ 11.990263] drivers/usb/core/inode.c: creating file '002' [ 11.990333] usb 1-1: New USB device found, idVendor=0a5c, idProduct=2110 [ 11.990475] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.990621] usb 1-1: Product: BCM2045B [ 11.990747] usb 1-1: Manufacturer: Broadcom Corp [ 11.990897] uhci_hcd 0000:00:1a.0: port 2 portsc 0093,00 [ 11.990903] hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 12.013306] Bluetooth: Core ver 2.13 [ 12.016377] usb 1-1: uevent [ 12.034513] NET: Registered protocol family 31 [ 12.034538] Bluetooth: HCI device and connection manager initialized [ 12.034563] Bluetooth: HCI socket layer initialized [ 12.036947] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 12.037002] btusb 1-1:1.0: usb_probe_interface [ 12.037003] btusb 1-1:1.0: usb_probe_interface - got id [ 12.037041] btusb 1-1:1.2: usb_probe_interface [ 12.037043] btusb 1-1:1.2: usb_probe_interface - got id [ 12.037049] btusb 1-1:1.3: usb_probe_interface [ 12.037050] btusb 1-1:1.3: usb_probe_interface - got id [ 12.037060] usbcore: registered new interface driver btusb [ 12.062697] fuse init (API version 7.10) [ 12.114719] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 12.143699] Adding 1542232k swap on /dev/sda3. Priority:-1 extents:1 across:1542232k [ 12.157193] EXT3 FS on sda2, internal journal [ 12.220908] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 12.221484] EXT2-fs warning (device sda4): ext2_fill_super: mounting ext3 filesystem as ext2 [ 12.221489] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended [ 12.347643] usb 1-2: ep0 maxpacket = 8 [ 12.370533] usb 1-2: default language 0x0409 [ 12.389625] usb 1-2: uevent [ 12.390332] usb 1-2: usb_probe_device [ 12.390334] usb 1-2: configuration #1 chosen from 1 choice [ 12.392537] usb 1-2: adding 1-2:1.0 (config #1, interface 0) [ 12.392558] usb 1-2:1.0: uevent [ 12.392706] drivers/usb/core/inode.c: creating file '003' [ 12.392747] usb 1-2: New USB device found, idVendor=0483, idProduct=2016 [ 12.392749] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.392750] usb 1-2: Product: Biometric Coprocessor [ 12.392751] usb 1-2: Manufacturer: STMicroelectronics [ 12.392755] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 12.392759] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 12.392762] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 12.392764] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 12.392767] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 12.392770] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 12.395727] usb 1-2: uevent [ 12.397235] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a155b20] [ 12.596836] usb usb3: suspend_rh (auto-stop) [ 12.596883] usb usb5: suspend_rh (auto-stop) [ 12.596926] usb usb6: suspend_rh (auto-stop) [ 12.596973] usb usb7: suspend_rh (auto-stop) [ 13.550292] hub 2-0:1.0: hub_suspend [ 13.550309] usb usb2: bus auto-suspend [ 13.550315] ehci_hcd 0000:00:1a.7: suspend root hub [ 14.390298] hub 3-0:1.0: hub_suspend [ 14.390314] usb usb3: bus auto-suspend [ 14.390319] usb usb3: suspend_rh [ 14.390351] hub 4-0:1.0: hub_suspend [ 14.390358] usb usb4: bus auto-suspend [ 14.390363] ehci_hcd 0000:00:1d.7: suspend root hub [ 14.390401] hub 5-0:1.0: hub_suspend [ 14.390406] usb usb5: bus auto-suspend [ 14.390410] usb usb5: suspend_rh [ 14.390438] hub 6-0:1.0: hub_suspend [ 14.390443] usb usb6: bus auto-suspend [ 14.390447] usb usb6: suspend_rh [ 14.390476] hub 7-0:1.0: hub_suspend [ 14.390481] usb usb7: bus auto-suspend [ 14.390485] usb usb7: suspend_rh [ 16.012092] ieee1394: Node removed: ID:BUS[0-00:1023] GUID[00061b032a155b20] [ 16.146586] sdhci-pci 0000:15:00.2: PCI INT C disabled [ 18.234543] usb usb1: uevent [ 18.234661] usb 1-0:1.0: uevent [ 18.234845] usb 1-1: uevent [ 18.234960] usb 1-1:1.0: uevent [ 18.235403] usb 1-1:1.1: uevent [ 18.235677] usb 1-1:1.2: uevent [ 18.235966] usb 1-1:1.3: uevent [ 18.236240] usb 1-2: uevent [ 18.236354] usb 1-2:1.0: uevent [ 18.238291] usb usb3: uevent [ 18.238406] usb 3-0:1.0: uevent [ 18.238992] usb usb2: uevent [ 18.239108] usb 2-0:1.0: uevent [ 18.242531] usb usb5: uevent [ 18.242656] usb 5-0:1.0: uevent [ 18.243231] usb usb6: uevent [ 18.243373] usb 6-0:1.0: uevent [ 18.244505] usb usb7: uevent [ 18.244620] usb 7-0:1.0: uevent [ 18.245192] usb usb4: uevent [ 18.245316] usb 4-0:1.0: uevent [ 19.079196] usb usb4: usb auto-resume [ 19.079207] ehci_hcd 0000:00:1d.7: resume root hub [ 19.107681] hub 4-0:1.0: hub_resume [ 19.107839] usb usb7: usb auto-resume [ 19.107845] usb usb7: wakeup_rh [ 19.107860] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 19.120042] Bluetooth: L2CAP ver 2.11 [ 19.120046] Bluetooth: L2CAP socket layer initialized [ 19.130737] Bluetooth: SCO (Voice Link) ver 0.6 [ 19.130741] Bluetooth: SCO socket layer initialized [ 19.143441] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.143447] Bluetooth: BNEP filters: protocol multicast [ 19.146760] hub 7-0:1.0: hub_resume [ 19.146915] usb usb3: usb auto-resume [ 19.146920] usb usb3: wakeup_rh [ 19.148916] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 19.162295] Bridge firewalling registered [ 19.166110] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 1, phase 0, 23 us [ 19.183599] hub 3-0:1.0: hub_resume [ 19.183676] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 19.183779] usb usb5: usb auto-resume [ 19.183785] usb usb5: wakeup_rh [ 19.220253] hub 5-0:1.0: hub_resume [ 19.220335] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 19.220431] usb usb6: usb auto-resume [ 19.220436] usb usb6: wakeup_rh [ 19.260058] hub 6-0:1.0: hub_resume [ 19.260111] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 19.260385] usb usb2: usb auto-resume [ 19.260392] ehci_hcd 0000:00:1a.7: resume root hub [ 19.296798] Bluetooth: RFCOMM socket layer initialized [ 19.296822] Bluetooth: RFCOMM TTY layer initialized [ 19.296826] Bluetooth: RFCOMM ver 1.10 [ 19.303405] hub 2-0:1.0: hub_resume [ 19.303491] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 20.346950] usb usb7: suspend_rh (auto-stop) [ 20.346974] usb usb3: suspend_rh (auto-stop) [ 20.347022] usb usb5: suspend_rh (auto-stop) [ 20.347065] usb usb6: suspend_rh (auto-stop) [ 21.336956] hub 4-0:1.0: hub_suspend [ 21.336973] usb usb4: bus auto-suspend [ 21.336979] ehci_hcd 0000:00:1d.7: suspend root hub [ 21.337019] hub 7-0:1.0: hub_suspend [ 21.337025] usb usb7: bus auto-suspend [ 21.337030] usb usb7: suspend_rh [ 21.337058] hub 3-0:1.0: hub_suspend [ 21.337064] usb usb3: bus auto-suspend [ 21.337067] usb usb3: suspend_rh [ 21.337093] hub 5-0:1.0: hub_suspend [ 21.337099] usb usb5: bus auto-suspend [ 21.337103] usb usb5: suspend_rh [ 21.337129] hub 6-0:1.0: hub_suspend [ 21.337134] usb usb6: bus auto-suspend [ 21.337138] usb usb6: suspend_rh [ 21.337167] hub 2-0:1.0: hub_suspend [ 21.337172] usb usb2: bus auto-suspend [ 21.337176] ehci_hcd 0000:00:1a.7: suspend root hub [ 45.389510] usb 1-1: uhci_result_common: failed with status 440000 [ 45.393543] usb 1-1: uhci_result_common: failed with status 440000 [ 45.397556] usb 1-1: uhci_result_common: failed with status 440000 [ 45.401561] usb 1-1: uhci_result_common: failed with status 440000 [ 45.405572] usb 1-1: uhci_result_common: failed with status 440000 [ 45.409554] usb 1-1: uhci_result_common: failed with status 440000 [ 45.413559] usb 1-1: uhci_result_common: failed with status 440000 [ 45.417562] usb 1-1: uhci_result_common: failed with status 440000 [ 45.421568] usb 1-1: uhci_result_common: failed with status 440000 [ 45.425558] usb 1-1: uhci_result_common: failed with status 440000 [ 45.429558] usb 1-1: uhci_result_common: failed with status 440000 [ 45.433557] usb 1-1: uhci_result_common: failed with status 440000 [ 45.437574] usb 1-1: uhci_result_common: failed with status 440000 [ 45.441561] usb 1-1: uhci_result_common: failed with status 440000 [ 45.445571] usb 1-1: uhci_result_common: failed with status 440000 [ 45.449554] usb 1-1: uhci_result_common: failed with status 440000 [ 45.453562] usb 1-1: uhci_result_common: failed with status 440000 [ 45.457555] usb 1-1: uhci_result_common: failed with status 440000 [ 45.461569] usb 1-1: uhci_result_common: failed with status 440000 [ 45.465563] usb 1-1: uhci_result_common: failed with status 440000 [ 45.469563] usb 1-1: uhci_result_common: failed with status 440000 [ 45.473551] usb 1-1: uhci_result_common: failed with status 440000 [ 45.477572] usb 1-1: uhci_result_common: failed with status 440000 [ 45.481558] usb 1-1: uhci_result_common: failed with status 440000 [ 45.485569] usb 1-1: uhci_result_common: failed with status 440000 [ 45.489553] usb 1-1: uhci_result_common: failed with status 440000 [ 45.493559] usb 1-1: uhci_result_common: failed with status 440000 [ 45.497562] usb 1-1: uhci_result_common: failed with status 440000 [ 45.501572] usb 1-1: uhci_result_common: failed with status 440000 [ 45.505559] usb 1-1: uhci_result_common: failed with status 440000 [ 45.509562] usb 1-1: uhci_result_common: failed with status 440000 [ 45.513561] usb 1-1: uhci_result_common: failed with status 440000 [ 45.517568] usb 1-1: uhci_result_common: failed with status 440000 [ 45.521557] usb 1-1: uhci_result_common: failed with status 440000 [ 45.525572] usb 1-1: uhci_result_common: failed with status 440000 [ 45.529552] usb 1-1: uhci_result_common: failed with status 440000 [ 45.533559] usb 1-1: uhci_result_common: failed with status 440000 [ 45.537562] usb 1-1: uhci_result_common: failed with status 440000 [ 45.541572] usb 1-1: uhci_result_common: failed with status 440000 [ 45.545561] usb 1-1: uhci_result_common: failed with status 440000 [ 45.549565] usb 1-1: uhci_result_common: failed with status 440000 [ 45.553552] usb 1-1: uhci_result_common: failed with status 440000 [ 45.557571] usb 1-1: uhci_result_common: failed with status 440000 [ 45.561562] usb 1-1: uhci_result_common: failed with status 440000 [ 45.565567] usb 1-1: uhci_result_common: failed with status 440000 [ 45.569558] usb 1-1: uhci_result_common: failed with status 440000 [ 45.573561] usb 1-1: uhci_result_common: failed with status 440000 [ 45.577560] usb 1-1: uhci_result_common: failed with status 440000 [ 45.581569] usb 1-1: uhci_result_common: failed with status 440000 [ 45.585559] usb 1-1: uhci_result_common: failed with status 440000 [ 45.589565] usb 1-1: uhci_result_common: failed with status 440000 [ 45.593552] usb 1-1: uhci_result_common: failed with status 440000 [ 45.596932] usb 1-1: uhci_result_common: failed with status 440000 [ 45.596997] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 45.597018] uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00 [ 45.597042] hub 1-0:1.0: port 1, status 0100, change 0003, 12 Mb/s [ 45.597048] usb 1-1: USB disconnect, address 2 [ 45.597052] usb 1-1: unregistering device [ 45.597058] usb 1-1: usb_disable_device nuking all URBs [ 45.597071] uhci_hcd 0000:00:1a.0: shutdown urb ffff8800796f5300 ep1in-intr [ 45.597529] btusb_intr_complete: hci0 urb ffff8800796f5300 failed to resubmit (19) [ 45.597588] uhci_hcd 0000:00:1a.0: release dev 2 ep81-INT, period 1, phase 0, 23 us [ 45.597639] usb 1-1: unregistering interface 1-1:1.0 [ 45.598099] btusb_send_frame: hci0 urb ffff8800797ee480 submission failed [ 45.848069] usb 1-1:1.0: uevent [ 45.848097] usb 1-1: unregistering interface 1-1:1.1 [ 45.848399] usb 1-1:1.1: uevent [ 45.848421] usb 1-1: unregistering interface 1-1:1.2 [ 45.848649] usb 1-1:1.2: uevent [ 45.848670] usb 1-1: unregistering interface 1-1:1.3 [ 45.848720] usb 1-1:1.3: uevent [ 45.849043] usb 1-1: uevent [ 45.966998] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 64.277851] [drm] Initialized drm 1.1.0 20060810 [ 64.286889] pci 0000:00:02.0: power state changed by ACPI to D0 [ 64.286905] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 64.286913] pci 0000:00:02.0: setting latency timer to 64 [ 64.287124] pci 0000:00:02.0: irq 312 for MSI/MSI-X [ 64.287689] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 122.598808] ACPI: \_SB_.GDCK - undocking [ 127.970866] PM: Syncing filesystems ... done. [ 127.975916] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 127.976707] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 128.000215] pci 0000:00:02.0: power state changed by ACPI to D3 [ 128.001567] usb 1-2: usb suspend [ 128.013471] hub 1-0:1.0: hub_suspend [ 128.013477] usb usb1: bus suspend [ 128.013480] usb usb1: suspend_rh [ 129.226910] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 129.560144] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 134.560128] ata1.00: qc timeout (cmd 0xec) [ 134.560139] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 134.560142] ata1.00: revalidation failed (errno=-5) [ 134.880121] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 144.880144] ata1.00: qc timeout (cmd 0xec) [ 144.880151] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 144.880154] ata1.00: revalidation failed (errno=-5) [ 145.200144] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 175.200104] ata1.00: qc timeout (cmd 0xec) [ 175.200113] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 175.200116] ata1.00: revalidation failed (errno=-5) [ 175.200172] ata1.00: disabled [ 175.213457] ata5: port disabled. ignoring. [ 175.213526] ata_piix 0000:00:1f.1: PCI INT C disabled [ 175.213745] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 175.229231] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [ 175.229238] ehci_hcd 0000:00:1d.7: --> PCI D3 [ 175.229248] uhci_hcd 0000:00:1d.2: uhci_pci_suspend [ 175.229313] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 175.229315] uhci_hcd 0000:00:1d.2: --> PCI D0/legacy [ 175.229316] uhci_hcd 0000:00:1d.1: uhci_pci_suspend [ 175.229381] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 175.229382] uhci_hcd 0000:00:1d.1: --> PCI D0/legacy [ 175.229384] uhci_hcd 0000:00:1d.0: uhci_pci_suspend [ 175.229448] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 175.229450] uhci_hcd 0000:00:1d.0: --> PCI D0/legacy [ 175.229771] HDA Intel 0000:00:1b.0: PCI INT B disabled [ 175.240219] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 175.255513] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [ 175.255519] ehci_hcd 0000:00:1a.7: --> PCI D3 [ 175.255521] uhci_hcd 0000:00:1a.1: uhci_pci_suspend [ 175.255588] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 175.255589] uhci_hcd 0000:00:1a.1: --> PCI D0/legacy [ 175.255591] uhci_hcd 0000:00:1a.0: uhci_pci_suspend [ 175.255655] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 175.255656] uhci_hcd 0000:00:1a.0: --> PCI D0/legacy [ 175.258116] e1000e 0000:00:19.0: PCI INT A disabled [ 175.275302] ACPI: Preparing to enter system sleep state S3 [ 175.289251] Disabling non-boot CPUs ... [ 175.291468] CPU 1 is now offline [ 175.291470] SMP alternatives: switching to UP code [ 175.353575] CPU1 is down [ 175.353693] Extended CMOS year: 2000 [ 175.353693] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 175.353693] Back to C! [ 175.353693] Extended CMOS year: 2000 [ 175.353693] Enabling non-boot CPUs ... [ 175.353693] SMP alternatives: switching to SMP code [ 175.417579] Booting processor 1 APIC 0x1 ip 0x6000 [ 175.348958] Initializing CPU#1 [ 175.348958] Calibrating delay using timer specific routine.. 4789.54 BogoMIPS (lpj=7980064) [ 175.348958] CPU: L1 I cache: 32K, L1 D cache: 32K [ 175.348958] CPU: L2 cache: 4096K [ 175.348958] CPU: Physical Processor ID: 0 [ 175.348958] CPU: Processor Core ID: 1 [ 175.348958] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 175.511235] CPU1: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0a [ 175.514172] Switched to high resolution mode on CPU 1 [ 175.523976] CPU1 is up [ 175.523978] ACPI: Waking up from system sleep state S3 [ 175.565406] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 175.606001] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403) [ 175.608694] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 175.620261] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 175.620273] e1000e 0000:00:19.0: setting latency timer to 64 [ 175.620331] e1000e 0000:00:19.0: irq 313 for MSI/MSI-X [ 175.899440] uhci_hcd 0000:00:1a.0: PCI legacy resume [ 175.899447] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 175.899453] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 175.899510] uhci_hcd 0000:00:1a.0: uhci_pci_resume [ 175.899515] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00 [ 175.899516] uhci_hcd 0000:00:1a.0: Performing full reset [ 175.899539] usb usb1: root hub lost power or was reset [ 175.899541] usb usb1: suspend_rh [ 175.899572] uhci_hcd 0000:00:1a.1: PCI legacy resume [ 175.902777] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 175.902783] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 175.902789] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 175.902843] uhci_hcd 0000:00:1a.1: uhci_pci_resume [ 175.902848] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 175.902849] uhci_hcd 0000:00:1a.1: Performing full reset [ 175.902872] usb usb3: root hub lost power or was reset [ 175.902873] usb usb3: suspend_rh [ 175.902899] ehci_hcd 0000:00:1a.7: PCI D0, from previous PCI D3 [ 175.903417] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 175.903430] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 175.903441] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 175.916797] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 175.916845] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 175.916860] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 175.916947] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020) [ 175.916982] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 175.917041] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 175.917078] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 175.917134] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 175.917166] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20004040, writing 0x4040) [ 175.917184] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 175.917244] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 175.917273] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20005050, writing 0x5050) [ 175.917298] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 175.917344] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 175.917380] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20006060, writing 0x6060) [ 175.917398] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 175.917446] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 175.917453] uhci_hcd 0000:00:1d.0: PCI legacy resume [ 175.918271] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 175.918277] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 175.918283] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 175.918356] uhci_hcd 0000:00:1d.0: uhci_pci_resume [ 175.918361] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00 [ 175.918362] uhci_hcd 0000:00:1d.0: Performing full reset [ 175.918384] usb usb5: root hub lost power or was reset [ 175.918385] usb usb5: suspend_rh [ 175.918402] uhci_hcd 0000:00:1d.1: PCI legacy resume [ 175.918407] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 175.918413] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 175.918478] uhci_hcd 0000:00:1d.1: uhci_pci_resume [ 175.918483] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 175.918484] uhci_hcd 0000:00:1d.1: Performing full reset [ 175.918507] usb usb6: root hub lost power or was reset [ 175.918508] usb usb6: suspend_rh [ 175.918524] uhci_hcd 0000:00:1d.2: PCI legacy resume [ 175.919032] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 175.919040] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 175.919051] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 175.919127] uhci_hcd 0000:00:1d.2: uhci_pci_resume [ 175.919134] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 [ 175.919136] uhci_hcd 0000:00:1d.2: Performing full reset [ 175.919167] usb usb7: root hub lost power or was reset [ 175.919169] usb usb7: suspend_rh [ 175.919205] ehci_hcd 0000:00:1d.7: PCI D0, from previous PCI D3 [ 175.919732] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 175.919744] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 175.919755] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 175.919908] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [ 175.919942] pci 0000:00:1e.0: setting latency timer to 64 [ 175.920081] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) [ 175.920096] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 175.920103] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 175.920163] ata5: port disabled. ignoring. [ 175.933537] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 175.933631] ahci 0000:00:1f.2: setting latency timer to 64 [ 175.933843] pci 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x40100102) [ 175.933889] pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 175.933965] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 175.934047] pci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 175.940343] thinkpad_acpi: ACPI backlight control delay disabled [ 175.942379] usb usb1: usb resume [ 175.942382] usb usb1: wakeup_rh [ 175.976767] hub 1-0:1.0: hub_reset_resume [ 175.976770] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 176.080674] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 176.080676] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 176.080751] uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00 [ 176.080753] hub 1-0:1.0: port 2: status 0100 change 0003 [ 176.081736] ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [ 176.082711] ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [ 176.100578] ata4.00: configured for UDMA/33 [ 176.183463] usb usb2: usb resume [ 176.183469] ehci_hcd 0000:00:1a.7: resume root hub [ 176.250123] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 176.327383] ehci_hcd 0000:00:1a.7: port 2 full speed --> companion [ 176.327385] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT [ 176.327628] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001000 POWER sig=se0 [ 176.327633] ehci_hcd 0000:00:1a.7: failed handover port 1: 1000 [ 176.340107] hub 2-0:1.0: hub_resume [ 176.340121] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC [ 176.443459] usb usb4: usb resume [ 176.443464] ehci_hcd 0000:00:1d.7: resume root hub [ 176.483437] hub 4-0:1.0: hub_resume [ 176.483499] uhci_hcd 0000:00:1a.0: port 2 portsc 0093,00 [ 176.483509] usb 1-2: finish reset-resume [ 176.590109] usb 1-2: reset full speed USB device using uhci_hcd and address 3 [ 176.716767] usb 1-2: ep0 maxpacket = 8 [ 176.734613] pci 0000:00:02.0: power state changed by ACPI to D0 [ 176.734735] pci 0000:00:02.0: power state changed by ACPI to D0 [ 176.734743] pci 0000:00:02.0: setting latency timer to 64 [ 176.736533] Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 2 chg 0004 evt 0004 [ 176.746044] hub 1-0:1.0: port 2, status 0103, change 0000, 12 Mb/s [ 176.746047] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 176.746050] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 176.746621] done. [ 179.346953] hub 2-0:1.0: hub_suspend [ 179.346970] usb usb2: bus auto-suspend [ 179.346976] ehci_hcd 0000:00:1a.7: suspend root hub [ 179.347012] hub 4-0:1.0: hub_suspend [ 179.347018] usb usb4: bus auto-suspend [ 179.347022] ehci_hcd 0000:00:1d.7: suspend root hub [ 179.963672] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 179.963683] end_request: I/O error, dev sda, sector 51191615 [ 179.963715] Buffer I/O error on device sda2, logical block 6398944 [ 179.963740] lost page write due to I/O error on sda2 [ 179.963748] Buffer I/O error on device sda2, logical block 6398945 [ 179.963773] lost page write due to I/O error on sda2 [ 179.963795] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 179.963802] end_request: I/O error, dev sda, sector 51191815 [ 179.963827] Buffer I/O error on device sda2, logical block 6398969 [ 179.963852] lost page write due to I/O error on sda2 [ 179.963866] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 179.963873] end_request: I/O error, dev sda, sector 51192207 [ 179.963898] Buffer I/O error on device sda2, logical block 6399018 [ 179.963922] lost page write due to I/O error on sda2 [ 179.963928] Buffer I/O error on device sda2, logical block 6399019 [ 179.963953] lost page write due to I/O error on sda2 [ 179.963959] Buffer I/O error on device sda2, logical block 6399020 [ 179.963983] lost page write due to I/O error on sda2 [ 179.963989] Buffer I/O error on device sda2, logical block 6399021 [ 179.964014] lost page write due to I/O error on sda2 [ 179.964020] Buffer I/O error on device sda2, logical block 6399022 [ 179.964045] lost page write due to I/O error on sda2 [ 179.964050] Buffer I/O error on device sda2, logical block 6399023 [ 179.964075] lost page write due to I/O error on sda2 [ 179.964087] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 179.964093] end_request: I/O error, dev sda, sector 51348311 [ 179.967580] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 179.967589] end_request: I/O error, dev sda, sector 14322943 [ 179.967628] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 179.967636] end_request: I/O error, dev sda, sector 51122479 [ 179.967670] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 179.967678] end_request: I/O error, dev sda, sector 51192087 [ 179.967746] JBD: Detected IO errors while flushing file data on sda2 [ 179.967889] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 179.967898] end_request: I/O error, dev sda, sector 55842855 [ 179.967987] Aborting journal on device sda2. [ 179.968029] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 179.968038] end_request: I/O error, dev sda, sector 55840847 [ 179.968086] journal commit I/O error [ 179.968697] ext3_abort called. [ 179.968720] EXT3-fs error (device sda2): ext3_journal_start_sb: Detected aborted journal [ 179.968798] Remounting filesystem read-only [ 180.154330] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 180.154340] end_request: I/O error, dev sda, sector 66411583 [ 180.154414] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK [ 180.154420] end_request: I/O error, dev sda, sector 66411583 [ 180.187587] usb usb4: usb auto-resume [ 180.187598] ehci_hcd 0000:00:1d.7: resume root hub [ 180.227752] hub 4-0:1.0: hub_resume [ 180.227869] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 180.228003] usb usb7: usb auto-resume [ 180.228009] usb usb7: wakeup_rh [ 180.263596] hub 7-0:1.0: hub_reset_resume [ 180.263603] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 180.367031] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 180.367104] usb usb3: usb auto-resume [ 180.367109] usb usb3: wakeup_rh [ 180.403434] hub 3-0:1.0: hub_reset_resume [ 180.403440] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 180.506890] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 180.506966] usb usb5: usb auto-resume [ 180.506971] usb usb5: wakeup_rh [ 180.543428] hub 5-0:1.0: hub_reset_resume [ 180.543435] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 180.646895] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 180.646977] usb usb6: usb auto-resume [ 180.646982] usb usb6: wakeup_rh [ 180.683436] hub 6-0:1.0: hub_reset_resume [ 180.683443] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 180.786835] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 180.787059] usb usb2: usb auto-resume [ 180.787069] ehci_hcd 0000:00:1a.7: resume root hub [ 180.850259] hub 2-0:1.0: hub_resume [ 180.850370] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 181.346934] usb usb7: suspend_rh (auto-stop) [ 181.596749] usb usb3: suspend_rh (auto-stop) [ 181.596793] usb usb5: suspend_rh (auto-stop) [ 181.846931] usb usb6: suspend_rh (auto-stop) [ 182.337754] hub 4-0:1.0: hub_suspend [ 182.337769] usb usb4: bus auto-suspend [ 182.337775] ehci_hcd 0000:00:1d.7: suspend root hub [ 182.366923] hub 7-0:1.0: hub_suspend [ 182.366940] usb usb7: bus auto-suspend [ 182.366945] usb usb7: suspend_rh [ 182.506933] hub 3-0:1.0: hub_suspend [ 182.506948] usb usb3: bus auto-suspend [ 182.506953] usb usb3: suspend_rh [ 183.336946] hub 5-0:1.0: hub_suspend [ 183.336961] usb usb5: bus auto-suspend [ 183.336966] usb usb5: suspend_rh [ 183.336996] hub 6-0:1.0: hub_suspend [ 183.337002] usb usb6: bus auto-suspend [ 183.337006] usb usb6: suspend_rh [ 183.346974] hub 2-0:1.0: hub_suspend [ 183.346990] usb usb2: bus auto-suspend [ 183.346995] ehci_hcd 0000:00:1a.7: suspend root hub [ 266.270707] e1000e 0000:00:19.0: irq 313 for MSI/MSI-X [ 266.323633] e1000e 0000:00:19.0: irq 313 for MSI/MSI-X [ 302.977656] 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 302.977663] 0000:00:19.0: eth0: 10/100 speed: disabling TSO