| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20090127073055.GA30360@havoc.gtf.org>
Date: Tue, 27 Jan 2009 02:30:55 -0500
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] libata fixes
The sata_mv 8-port fix was for a longstanding and ugly bug, for those
who owned 8-port cards (4-port cards unaffected).
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/Kconfig | 6 ++--
drivers/ata/libata-sff.c | 12 ++++++-
drivers/ata/pata_rb532_cf.c | 2 -
drivers/ata/pata_via.c | 22 +++++++++---
drivers/ata/sata_mv.c | 56 ++++++++++++++----------------
drivers/ata/sata_nv.c | 70 +++++++++++++++++++++++--------------
include/linux/pci_ids.h | 4 ++
7 files changed, 104 insertions(+), 68 deletions(-)
delete mode 100644 arch/arm/mach-integrator/clock.h
JosephChan@....com.tw (1):
[libata] pata_via: support VX855, future chips whose IDE controller use 0x0571
Mark Lord (5):
sata_mv: fix 8-port timeouts on 508x/6081 chips
sata_mv: don't read hc_irq_cause
sata_mv: remove bogus nsect restriction
sata_mv: msi masking fix (v2)
sata_mv: no longer experimental (v2)
Phil Sutter (1):
pata-rb532-cf: remove set_irq_type from finish_io
Tejun Heo (4):
libata-sff: fix incorrect EH message
libata: set NODEV_HINT for 0x7f status
sata_nv: rename nv_nf2_hardreset()
sata_nv: fix MCP5x reset
Thomas Reitmayr (1):
sata_mv: Properly initialize main irq mask
diff --git a/arch/arm/mach-integrator/clock.h b/arch/arm/mach-integrator/clock.h
deleted file mode 100644
index e69de29..0000000
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 503a908..0bcf264 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -112,11 +112,11 @@ config ATA_PIIX
If unsure, say N.
config SATA_MV
- tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ tristate "Marvell SATA support"
help
This option enables support for the Marvell Serial ATA family.
- Currently supports 88SX[56]0[48][01] chips.
+ Currently supports 88SX[56]0[48][01] PCI(-X) chips,
+ as well as the newer [67]042 PCI-X/PCIe and SOC devices.
If unsure, say N.
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 5a4aad1..0b299b0 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1322,7 +1322,7 @@ fsm_start:
* condition. Mark hint.
*/
ata_ehi_push_desc(ehi, "ST-ATA: "
- "DRQ=1 with device error, "
+ "DRQ=0 without device error, "
"dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM |
AC_ERR_NODEV_HINT;
@@ -1358,6 +1358,16 @@ fsm_start:
qc->err_mask |= AC_ERR_HSM;
}
+ /* There are oddball controllers with
+ * status register stuck at 0x7f and
+ * lbal/m/h at zero which makes it
+ * pass all other presence detection
+ * mechanisms we have. Set NODEV_HINT
+ * for it. Kernel bz#7241.
+ */
+ if (status == 0x7f)
+ qc->err_mask |= AC_ERR_NODEV_HINT;
+
/* ata_pio_sectors() might change the
* state to HSM_ST_LAST. so, the state
* is changed after ata_pio_sectors().
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index c2e6fb9..ebfcda2 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -63,8 +63,6 @@ static inline void rb532_pata_finish_io(struct ata_port *ap)
ata_sff_sync might be sufficient. */
ata_sff_dma_pause(ap);
ndelay(RB500_CF_IO_DELAY);
-
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
}
static void rb532_pata_exec_command(struct ata_port *ap,
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 681169c..79a6c9a 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -86,6 +86,10 @@ enum {
VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */
};
+enum {
+ VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */
+};
+
/*
* VIA SouthBridge chips.
*/
@@ -97,8 +101,12 @@ static const struct via_isa_bridge {
u8 rev_max;
u16 flags;
} via_isa_bridges[] = {
+ { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f,
+ VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
{ "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 |
VIA_BAD_AST | VIA_SATA_PATA },
+ { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f,
+ VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
@@ -122,6 +130,8 @@ static const struct via_isa_bridge {
{ "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
{ "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
{ "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+ { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f,
+ VIA_UDMA_133 | VIA_BAD_AST },
{ NULL }
};
@@ -460,6 +470,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
static int printed_version;
u8 enable;
u32 timing;
+ unsigned long flags = id->driver_data;
int rc;
if (!printed_version++)
@@ -469,9 +480,13 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (rc)
return rc;
+ if (flags & VIA_IDFLAG_SINGLE)
+ ppi[1] = &ata_dummy_port_info;
+
/* To find out how the IDE will behave and what features we
actually have to look at the bridge not the IDE controller */
- for (config = via_isa_bridges; config->id; config++)
+ for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON;
+ config++)
if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
!!(config->flags & VIA_BAD_ID),
config->id, NULL))) {
@@ -482,10 +497,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
pci_dev_put(isa);
}
- if (!config->id) {
- printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n");
- return -ENODEV;
- }
pci_dev_put(isa);
if (!(config->flags & VIA_NO_ENABLES)) {
@@ -587,6 +598,7 @@ static const struct pci_device_id via[] = {
{ PCI_VDEVICE(VIA, 0x1571), },
{ PCI_VDEVICE(VIA, 0x3164), },
{ PCI_VDEVICE(VIA, 0x5324), },
+ { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE },
{ },
};
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 8691863..f2d8a02 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -33,10 +33,6 @@
*
* --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
*
- * --> Investigate problems with PCI Message Signalled Interrupts (MSI).
- *
- * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead.
- *
* --> Develop a low-power-consumption strategy, and implement it.
*
* --> [Experiment, low priority] Investigate interrupt coalescing.
@@ -72,7 +68,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "1.24"
+#define DRV_VERSION "1.25"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -351,8 +347,6 @@ enum {
EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */
- GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */
-
/* Host private flags (hp_flags) */
MV_HP_FLAG_MSI = (1 << 0),
MV_HP_ERRATA_50XXB0 = (1 << 1),
@@ -883,19 +877,15 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
struct mv_host_priv *hpriv = ap->host->private_data;
int hardport = mv_hardport_from_port(ap->port_no);
void __iomem *hc_mmio = mv_hc_base_from_port(
- mv_host_base(ap->host), hardport);
- u32 hc_irq_cause, ipending;
+ mv_host_base(ap->host), ap->port_no);
+ u32 hc_irq_cause;
/* clear EDMA event indicators, if any */
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- /* clear EDMA interrupt indicator, if any */
- hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
- ipending = (DEV_IRQ | DMA_IRQ) << hardport;
- if (hc_irq_cause & ipending) {
- writelfl(hc_irq_cause & ~ipending,
- hc_mmio + HC_IRQ_CAUSE_OFS);
- }
+ /* clear pending irq events */
+ hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
+ writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
mv_edma_cfg(ap, want_ncq);
@@ -1099,20 +1089,12 @@ static void mv6_dev_config(struct ata_device *adev)
*
* Gen-II does not support NCQ over a port multiplier
* (no FIS-based switching).
- *
- * We don't have hob_nsect when doing NCQ commands on Gen-II.
- * See mv_qc_prep() for more info.
*/
if (adev->flags & ATA_DFLAG_NCQ) {
if (sata_pmp_attached(adev->link->ap)) {
adev->flags &= ~ATA_DFLAG_NCQ;
ata_dev_printk(adev, KERN_INFO,
"NCQ disabled for command-based switching\n");
- } else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) {
- adev->max_sectors = GEN_II_NCQ_MAX_SECTORS;
- ata_dev_printk(adev, KERN_INFO,
- "max_sectors limited to %u for NCQ\n",
- adev->max_sectors);
}
}
}
@@ -1450,7 +1432,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
* only 11 bytes...so we must pick and choose required
* registers based on the command. So, we drop feature and
* hob_feature for [RW] DMA commands, but they are needed for
- * NCQ. NCQ will drop hob_nsect.
+ * NCQ. NCQ will drop hob_nsect, which is not needed there
+ * (nsect is used only for the tag; feat/hob_feat hold true nsect).
*/
switch (tf->command) {
case ATA_CMD_READ:
@@ -2214,9 +2197,15 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
struct ata_host *host = dev_instance;
struct mv_host_priv *hpriv = host->private_data;
unsigned int handled = 0;
+ int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI;
u32 main_irq_cause, pending_irqs;
spin_lock(&host->lock);
+
+ /* for MSI: block new interrupts while in here */
+ if (using_msi)
+ writel(0, hpriv->main_irq_mask_addr);
+
main_irq_cause = readl(hpriv->main_irq_cause_addr);
pending_irqs = main_irq_cause & hpriv->main_irq_mask;
/*
@@ -2230,6 +2219,11 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
handled = mv_host_intr(host, pending_irqs);
}
spin_unlock(&host->lock);
+
+ /* for MSI: unmask; interrupt cause bits will retrigger now */
+ if (using_msi)
+ writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
+
return IRQ_RETVAL(handled);
}
@@ -2821,8 +2815,7 @@ static void mv_eh_thaw(struct ata_port *ap)
writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
/* clear pending irq events */
- hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
- hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
+ hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
mv_enable_port_irqs(ap, ERR_IRQ);
@@ -3075,6 +3068,9 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
}
+ /* initialize shadow irq mask with register's value */
+ hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr);
+
/* global interrupt mask: 0 == mask everything */
mv_set_main_irq_mask(host, ~0, 0);
@@ -3430,9 +3426,9 @@ static int mv_pci_init_one(struct pci_dev *pdev,
if (rc)
return rc;
- /* Enable interrupts */
- if (msi && pci_enable_msi(pdev))
- pci_intx(pdev, 1);
+ /* Enable message-switched interrupts, if requested */
+ if (msi && pci_enable_msi(pdev) == 0)
+ hpriv->hp_flags |= MV_HP_FLAG_MSI;
mv_dump_pci_cfg(pdev, 0x68);
mv_print_info(host);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 6f14606..c49ad0e 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -305,10 +305,10 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance);
static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
+static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static void nv_nf2_freeze(struct ata_port *ap);
static void nv_nf2_thaw(struct ata_port *ap);
-static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
static int nv_adma_slave_config(struct scsi_device *sdev);
@@ -352,6 +352,7 @@ enum nv_host_type
NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */
CK804,
ADMA,
+ MCP5x,
SWNCQ,
};
@@ -363,10 +364,10 @@ static const struct pci_device_id nv_pci_tbl[] = {
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), SWNCQ },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
@@ -432,7 +433,7 @@ static struct ata_port_operations nv_nf2_ops = {
.inherits = &nv_common_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
- .hardreset = nv_nf2_hardreset,
+ .hardreset = nv_noclassify_hardreset,
};
/* CK804 finally gets hardreset right */
@@ -467,8 +468,19 @@ static struct ata_port_operations nv_adma_ops = {
.host_stop = nv_adma_host_stop,
};
+/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to
+ * work, hardreset should be used and hardreset can't report proper
+ * signature, which suggests that mcp5x is closer to nf2 as long as
+ * reset quirkiness is concerned. Define separate ops for mcp5x with
+ * nv_noclassify_hardreset().
+ */
+static struct ata_port_operations nv_mcp5x_ops = {
+ .inherits = &nv_common_ops,
+ .hardreset = nv_noclassify_hardreset,
+};
+
static struct ata_port_operations nv_swncq_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_mcp5x_ops,
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_swncq_qc_prep,
@@ -531,6 +543,15 @@ static const struct ata_port_info nv_port_info[] = {
.port_ops = &nv_adma_ops,
.private_data = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht),
},
+ /* MCP5x */
+ {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+ .pio_mask = NV_PIO_MASK,
+ .mwdma_mask = NV_MWDMA_MASK,
+ .udma_mask = NV_UDMA_MASK,
+ .port_ops = &nv_mcp5x_ops,
+ .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
+ },
/* SWNCQ */
{
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
@@ -1530,6 +1551,17 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
return 0;
}
+static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ bool online;
+ int rc;
+
+ rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
+ &online, NULL);
+ return online ? -EAGAIN : rc;
+}
+
static void nv_nf2_freeze(struct ata_port *ap)
{
void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr;
@@ -1554,17 +1586,6 @@ static void nv_nf2_thaw(struct ata_port *ap)
iowrite8(mask, scr_addr + NV_INT_ENABLE);
}
-static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- bool online;
- int rc;
-
- rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
- &online, NULL);
- return online ? -EAGAIN : rc;
-}
-
static void nv_ck804_freeze(struct ata_port *ap)
{
void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
@@ -2355,14 +2376,9 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (type == CK804 && adma_enabled) {
dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
type = ADMA;
- }
-
- if (type == SWNCQ) {
- if (swncq_enabled)
- dev_printk(KERN_NOTICE, &pdev->dev,
- "Using SWNCQ mode\n");
- else
- type = GENERIC;
+ } else if (type == MCP5x && swncq_enabled) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
+ type = SWNCQ;
}
ppi[0] = &nv_port_info[type];
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index d56ad9c..febc10e 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1357,6 +1357,7 @@
#define PCI_DEVICE_ID_VIA_8783_0 0x3208
#define PCI_DEVICE_ID_VIA_8237 0x3227
#define PCI_DEVICE_ID_VIA_8251 0x3287
+#define PCI_DEVICE_ID_VIA_8261 0x3402
#define PCI_DEVICE_ID_VIA_8237A 0x3337
#define PCI_DEVICE_ID_VIA_8237S 0x3372
#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x5324
@@ -1366,10 +1367,13 @@
#define PCI_DEVICE_ID_VIA_CX700 0x8324
#define PCI_DEVICE_ID_VIA_CX700_IDE 0x0581
#define PCI_DEVICE_ID_VIA_VX800 0x8353
+#define PCI_DEVICE_ID_VIA_VX855 0x8409
#define PCI_DEVICE_ID_VIA_8371_1 0x8391
#define PCI_DEVICE_ID_VIA_82C598_1 0x8598
#define PCI_DEVICE_ID_VIA_838X_1 0xB188
#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198
+#define PCI_DEVICE_ID_VIA_C409_IDE 0XC409
+#define PCI_DEVICE_ID_VIA_ANON 0xFFFF
#define PCI_VENDOR_ID_SIEMENS 0x110A
#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists