Message-Id: <200902030941.57261.rjw@sisk.pl>
Date:	Tue, 3 Feb 2009 09:41:56 +0100
From:	"Rafael J. Wysocki" <rjw@...k.pl>
To:	Miles Lane <miles.lane@...il.com>
Cc:	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	"Greg Kroah-Hartman" <gregkh@...e.de>,
	David Brownell <dbrownell@...rs.sourceforge.net>
Subject: Re: 2.6.29-rc3-git3 -- Failure to resume two Sandisk USB flash drives attached to a Belkin USB Busport Mobile (F5U022).

Hi,

Did that work before?

On Tuesday 03 February 2009, Miles Lane wrote:
> Before suspend:
> 
> pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
> pci 0000:05:00.0: reg 10 32bit mmio: [0x000000-0x000fff]
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> ohci_hcd: block sizes: ed 80 td 96
> ohci_hcd 0000:05:00.0: enabling device (0000 -> 0002)
> ohci_hcd 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:05:00.0: setting latency timer to 64
> ohci_hcd 0000:05:00.0: OHCI Host Controller
> drivers/usb/core/inode.c: creating file '006'
> ohci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
> ohci_hcd 0000:05:00.0: WARNING: OPTi workarounds unavailable
> ohci_hcd 0000:05:00.0: created debug files
> ohci_hcd 0000:05:00.0: irq 17, io mem 0xf0000000
> ohci_hcd 0000:05:00.0: OHCI controller state
> ohci_hcd 0000:05:00.0: OHCI 1.0, NO legacy support registers
> ohci_hcd 0000:05:00.0: control 0x083 HCFS=operational CBSR=3
> ohci_hcd 0000:05:00.0: cmdstatus 0x00000 SOC=0
> ohci_hcd 0000:05:00.0: intrstatus 0x00000044 RHSC SF
> ohci_hcd 0000:05:00.0: intrenable 0x8000000a MIE RD WDH
> ohci_hcd 0000:05:00.0: hcca frame #0003
> ohci_hcd 0000:05:00.0: roothub.a 01000202 POTPGT=1 NPS NDP=2(2)
> ohci_hcd 0000:05:00.0: roothub.b 00000000 PPCM=0000 DR=0000
> ohci_hcd 0000:05:00.0: roothub.status 00008000 DRWE
> ohci_hcd 0000:05:00.0: roothub.portstatus [0] 0x00010101 CSC PPS CCS
> ohci_hcd 0000:05:00.0: roothub.portstatus [1] 0x00010101 CSC PPS CCS
> usb usb6: default language 0x0409
> usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb6: Product: OHCI Host Controller
> usb usb6: Manufacturer: Linux 2.6.29-rc3-git3 ohci_hcd
> usb usb6: SerialNumber: 0000:05:00.0
> usb usb6: uevent
> usb usb6: usb_probe_device
> usb usb6: configuration #1 chosen from 1 choice
> usb usb6: adding 6-0:1.0 (config #1, interface 0)
> usb 6-0:1.0: uevent
> hub 6-0:1.0: usb_probe_interface
> hub 6-0:1.0: usb_probe_interface - got id
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> hub 6-0:1.0: standalone hub
> hub 6-0:1.0: no power switching (usb 1.0)
> hub 6-0:1.0: global over-current protection
> hub 6-0:1.0: power on to power good time: 2ms
> hub 6-0:1.0: local power source is good
> hub 6-0:1.0: no over-current condition exists
> hub 6-0:1.0: trying to enable port power on non-switchable hub
> drivers/usb/core/inode.c: creating file '001'
> ohci_hcd 0000:05:00.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
> hub 6-0:1.0: port 1: status 0101 change 0001
> ohci_hcd 0000:05:00.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
> hub 6-0:1.0: port 2: status 0101 change 0001
> hub 6-0:1.0: state 7 ports 2 chg 0006 evt 0000
> hub 6-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
> ohci_hcd 0000:05:00.0: GetStatus roothub.portstatus [0] = 0x00100103
> PRSC PPS PES CCS
> usb 6-1: new full speed USB device using ohci_hcd and address 2
> ohci_hcd 0000:05:00.0: GetStatus roothub.portstatus [0] = 0x00100103
> PRSC PPS PES CCS
> usb 6-1: not running at top speed; connect to a high speed hub
> usb 6-1: default language 0x0409
> usb 6-1: New USB device found, idVendor=0781, idProduct=5406
> usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 6-1: Product: U3 Cruzer Micro
> usb 6-1: Manufacturer: SanDisk
> usb 6-1: SerialNumber: 1100500C9FC366E7
> usb 6-1: uevent
> usb 6-1: usb_probe_device
> usb 6-1: configuration #1 chosen from 1 choice
> usb 6-1: adding 6-1:1.0 (config #1, interface 0)
> usb 6-1:1.0: uevent
> drivers/usb/core/inode.c: creating file '002'
> hub 6-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
> libusual 6-1:1.0: usb_probe_interface
> libusual 6-1:1.0: usb_probe_interface - got id
> usbcore: registered new interface driver libusual
> ohci_hcd 0000:05:00.0: GetStatus roothub.portstatus [1] = 0x00100103
> PRSC PPS PES CCS
> Initializing USB Mass Storage driver...
> usb-storage 6-1:1.0: usb_probe_interface
> usb-storage 6-1:1.0: usb_probe_interface - got id
> scsi6 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> usb 6-2: new full speed USB device using ohci_hcd and address 3
> ohci_hcd 0000:05:00.0: GetStatus roothub.portstatus [1] = 0x00100103
> PRSC PPS PES CCS
> usb 6-2: not running at top speed; connect to a high speed hub
> usb 6-2: default language 0x0409
> usb 6-2: New USB device found, idVendor=0781, idProduct=5406
> usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 6-2: Product: U3 Cruzer Micro
> usb 6-2: Manufacturer: SanDisk Corporation
> usb 6-2: SerialNumber: 0000162B5371EB2B
> usb 6-2: uevent
> usb 6-2: usb_probe_device
> usb 6-2: configuration #1 chosen from 1 choice
> usb 6-2: adding 6-2:1.0 (config #1, interface 0)
> usb 6-2:1.0: uevent
> libusual 6-2:1.0: usb_probe_interface
> libusual 6-2:1.0: usb_probe_interface - got id
> usb-storage 6-2:1.0: usb_probe_interface
> usb-storage 6-2:1.0: usb_probe_interface - got id
> scsi7 : SCSI emulation for USB Mass Storage devices
> drivers/usb/core/inode.c: creating file '003'
> hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004
> usb-storage: device found at 3
> usb-storage: waiting for device to settle before scanning
> scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer           7.01 PQ: 0 ANSI: 0 CCS
> sd 6:0:0:0: [sdb] 15695871 512-byte hardware sectors: (8.03 GB/7.48 GiB)
> ohci_hcd 0000:05:00.0: urb ffff880043c29948 path 1 ep1in 92120000 cc 9
> --> status -121
> sd 6:0:0:0: [sdb] Write Protect is off
> sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
> sd 6:0:0:0: [sdb] Assuming drive cache: write through
> sd 6:0:0:0: [sdb] 15695871 512-byte hardware sectors: (8.03 GB/7.48 GiB)
> ohci_hcd 0000:05:00.0: urb ffff880043c29318 path 1 ep1in 93120000 cc 9
> --> status -121
> sd 6:0:0:0: [sdb] Write Protect is off
> sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
> sd 6:0:0:0: [sdb] Assuming drive cache: write through
>  sdb: sdb1
> sd 6:0:0:0: [sdb] Attached SCSI removable disk
> sd 6:0:0:0: Attached scsi generic sg2 type 0
> scsi 6:0:0:1: CD-ROM            SanDisk  Cruzer           7.01 PQ: 0 ANSI: 0
> usb 6-1:1.0: uevent
> usb 6-1: uevent
> ohci_hcd 0000:05:00.0: urb ffff880043c29738 path 1 ep1in 92120000 cc 9
> --> status -121
> sr1: scsi3-mmc drive: 48x/48x tray
> sr 6:0:0:1: Attached scsi CD-ROM sr1
> sr 6:0:0:1: Attached scsi generic sg3 type 5
> usb-storage: device scan complete
> scsi 7:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  3.27 PQ: 0 ANSI: 2
> sd 7:0:0:0: [sdc] 8009728 512-byte hardware sectors: (4.10 GB/3.81 GiB)
> ohci_hcd 0000:05:00.0: urb ffff880043c29a50 path 2 ep1in 92120000 cc 9
> --> status -121
> sd 7:0:0:0: [sdc] Write Protect is off
> sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
> sd 7:0:0:0: [sdc] Assuming drive cache: write through
> sd 7:0:0:0: [sdc] 8009728 512-byte hardware sectors: (4.10 GB/3.81 GiB)
> ohci_hcd 0000:05:00.0: urb ffff880043c29738 path 2 ep1in 93120000 cc 9
> --> status -121
> sd 7:0:0:0: [sdc] Write Protect is off
> sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
> sd 7:0:0:0: [sdc] Assuming drive cache: write through
>  sdc: sdc1
> sd 7:0:0:0: [sdc] Attached SCSI removable disk
> sd 7:0:0:0: Attached scsi generic sg4 type 0
> scsi 7:0:0:1: CD-ROM            SanDisk  U3 Cruzer Micro  3.27 PQ: 0 ANSI: 2
> ohci_hcd 0000:05:00.0: urb ffff880043c29108 path 2 ep1in 93120000 cc 9
> --> status -121
> ohci_hcd 0000:05:00.0: urb ffff8800509cab58 path 2 ep1in 43160000 cc 4
> --> status -32
> usb 6-2:1.0: uevent
> usb 6-2: uevent
> ohci_hcd 0000:05:00.0: urb ffff880043c29630 path 2 ep1in 93120000 cc 9
> --> status -121
> ohci_hcd 0000:05:00.0: urb ffff8800509cab58 path 2 ep1in 43160000 cc 4
> --> status -32
> ohci_hcd 0000:05:00.0: urb ffff880043c29630 path 2 ep1in 93120000 cc 9
> --> status -121
> ohci_hcd 0000:05:00.0: urb ffff8800509cab58 path 2 ep1in 43160000 cc 4
> --> status -32
> ------------[ cut here ]------------
> WARNING: at drivers/usb/storage/transport.c:584
> last_sector_hacks+0x103/0x165 [usb_storage]()
> Hardware name: MT6821
> sdb: Successful last sector success at 15695870, device 0781:5406:0200
> Modules linked in: usb_storage libusual ohci_hcd iwl3945 rfkill
> mac80211 led_class lib80211 cfg80211 orinoco_cs orinoco hermes_dld
> hermes binfmt_misc sco bridge stp rfcomm llc bnep l2cap bluetooth ipv6
> acpi_cpufreq cpufreq_ondemand cpufreq_stats cpufreq_performance
> freq_table cpufreq_powersave pci_slot sbs sbshc sbp2 ppdev parport_pc
> lp parport snd_hda_codec_si3054 snd_hda_codec_idt snd_hda_intel
> snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm arc4 ecb
> snd_seq_oss joydev pcmcia snd_seq_midi snd_rawmidi snd_seq_midi_event
> snd_seq snd_timer snd_seq_device tifm_7xx1 yenta_socket rsrc_nonstatic
> pcmcia_core rng_core ac tifm_core snd rtc_cmos rtc_core rtc_lib
> battery button iTCO_wdt iTCO_vendor_support psmouse soundcore
> snd_page_alloc evdev ohci1394 sr_mod cdrom ehci_hcd ieee1394 uhci_hcd
> usbcore sky2 thermal processor fan thermal_sys hwmon fuse [last
> unloaded: cfg80211]
> Pid: 12603, comm: usb-storage Tainted: G        W  2.6.29-rc3-git3 #4
> Call Trace:
>  [<ffffffff8023ac8f>] warn_slowpath+0xd3/0x10f
>  [<ffffffff805125a9>] ? wait_for_common+0xbd/0xfb
>  [<ffffffff805125d7>] ? wait_for_common+0xeb/0xfb
>  [<ffffffff802351fb>] ? default_wake_function+0x0/0xf
>  [<ffffffffa0188da5>] ? usb_stor_msg_common+0x134/0x166 [usb_storage]
>  [<ffffffffa018920c>] ? usb_stor_bulk_transfer_buf+0x7c/0x85 [usb_storage]
>  [<ffffffffa01898b3>] ? usb_stor_Bulk_transport+0x156/0x297 [usb_storage]
>  [<ffffffffa0188c0f>] last_sector_hacks+0x103/0x165 [usb_storage]
>  [<ffffffffa01895f7>] usb_stor_invoke_transport+0x2ce/0x2db [usb_storage]
>  [<ffffffffa0188a36>] usb_stor_transparent_scsi_command+0x9/0xb [usb_storage]
>  [<ffffffffa018ac2b>] usb_stor_control_thread+0x14e/0x1ff [usb_storage]
>  [<ffffffff80514ca4>] ? _spin_unlock_irqrestore+0x4e/0x5c
>  [<ffffffffa018aadd>] ? usb_stor_control_thread+0x0/0x1ff [usb_storage]
>  [<ffffffff8024e88d>] kthread+0x49/0x76
>  [<ffffffff8020c87a>] child_rip+0xa/0x20
>  [<ffffffff8024e844>] ? kthread+0x0/0x76
>  [<ffffffff8020c870>] ? child_rip+0x0/0x20
> ---[ end trace d209a224db943e8f ]---
> ohci_hcd 0000:05:00.0: urb ffff880043c29b58 path 2 ep1in 92120000 cc 9
> --> status -121
> sr2: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
> sr 7:0:0:1: Attached scsi CD-ROM sr2
> sr 7:0:0:1: Attached scsi generic sg5 type 5
> usb-storage: device scan complete
> ohci_hcd 0000:05:00.0: urb ffff88004c50e948 path 2 ep1in 43120000 cc 4
> --> status -32
> ohci_hcd 0000:05:00.0: urb ffff88004c50eb58 path 2 ep1in 92120000 cc 9
> --> status -121
> ohci_hcd 0000:05:00.0: urb ffff8800509cab58 path 2 ep1in 42160000 cc 4
> --> status -32
> usb 6-2:1.0: uevent
> usb 6-2: uevent
> usb 6-1:1.0: uevent
> usb 6-1: uevent
> sky2 eth0: disabling interface
> wlan0: disassociating by local choice (reason=3)
> PM: Syncing filesystems ... done.
> PM: Preparing system for mem sleep
> Freezing user space processes ... (elapsed 0.01 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> PM: Entering mem sleep
> Suspending console(s) (use no_console_suspend to debug)
> usb 6-2: usb suspend
> usb 6-1: usb suspend
> hub 6-0:1.0: hub_suspend
> usb usb6: bus suspend
> ohci_hcd 0000:05:00.0: suspend root hub
> ohci_hcd 0000:05:00.0: PCI INT A disabled
> ohci_hcd 0000:05:00.0: wakeup: 0
> ohci_hcd 0000:05:00.0: --> PCI D0 legacy
> sd 0:0:0:0: [sda] Synchronizing SCSI cache
> sd 0:0:0:0: [sda] Stopping disk
> pci 0000:00:02.0: PCI INT A disabled
> ACPI handle has no context!
> ACPI handle has no context!
> tifm_7xx1 0000:04:09.2: PME# disabled
> tifm_7xx1 0000:04:09.2: PCI INT A disabled
> ACPI handle has no context!
> ACPI handle has no context!
> sky2 0000:02:00.0: PME# disabled
> ahci 0000:00:1f.2: power state changed by ACPI to D3
> ata6: port disabled. ignoring.
> ata_piix 0000:00:1f.1: PCI INT B disabled
> ehci_hcd 0000:00:1d.7: PCI INT A disabled
> ehci_hcd 0000:00:1d.7: PME# disabled
> ehci_hcd 0000:00:1d.7: wakeup: 0
> ehci_hcd 0000:00:1d.7: --> PCI D3
> uhci_hcd 0000:00:1d.3: uhci_pci_suspend
> uhci_hcd 0000:00:1d.3: PCI INT D disabled
> uhci_hcd 0000:00:1d.3: wakeup: 0
> uhci_hcd 0000:00:1d.3: --> PCI D0 legacy
> uhci_hcd 0000:00:1d.2: uhci_pci_suspend
> uhci_hcd 0000:00:1d.2: PCI INT C disabled
> uhci_hcd 0000:00:1d.2: wakeup: 0
> uhci_hcd 0000:00:1d.2: --> PCI D0 legacy
> uhci_hcd 0000:00:1d.1: uhci_pci_suspend
> uhci_hcd 0000:00:1d.1: PCI INT B disabled
> uhci_hcd 0000:00:1d.1: wakeup: 0
> uhci_hcd 0000:00:1d.1: --> PCI D0 legacy
> uhci_hcd 0000:00:1d.0: uhci_pci_suspend
> uhci_hcd 0000:00:1d.0: PCI INT A disabled
> uhci_hcd 0000:00:1d.0: wakeup: 0
> uhci_hcd 0000:00:1d.0: --> PCI D0 legacy
> HDA Intel 0000:00:1b.0: PCI INT A disabled
> ACPI: Preparing to enter system sleep state S3
> Disabling non-boot CPUs ...
> CPU 1 is now offline
> lockdep: fixing up alternatives.
> SMP alternatives: switching to UP code
> CPU1 is down
> 
> After resume:
> 
> yenta_cardbus 0000:04:09.0: restoring config space at offset 0xf (was
> 0x54001ff, writing 0x50001ff)
> ...
> ehci_hcd 0000:00:1d.7: resume root hub
> hub 5-0:1.0: hub_resume
> ohci_hcd 0000:05:00.0: enabling device (0000 -> 0002)
> ohci_hcd 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:05:00.0: setting latency timer to 64
> ohci_hcd 0000:05:00.0: BIOS/SMM active, control ffffffff
> ohci_hcd 0000:05:00.0: USB HC TakeOver from BIOS/SMM
> ohci_hcd 0000:05:00.0: USB HC takeover failed!  (BIOS/SMM bug)
> ohci_hcd 0000:05:00.0: USB HC reset timed out!
> ohci_hcd 0000:05:00.0: can't restart, -1
> usb usb6: root hub lost power or was reset
> ohci_hcd 0000:05:00.0: already suspended
> usb usb6: usb resume
> ohci_hcd 0000:05:00.0: BIOS/SMM active, control ffffffff
> ohci_hcd 0000:05:00.0: USB HC TakeOver from BIOS/SMM
> ohci_hcd 0000:05:00.0: USB HC takeover failed!  (BIOS/SMM bug)
> ohci_hcd 0000:05:00.0: USB HC reset timed out!
> ohci_hcd 0000:05:00.0: can't restart, -1
> usb usb6: root hub lost power or was reset
> usb usb6: bus resume fail, err -1
> ohci_hcd 0000:05:00.0: HC died; cleaning up
> pm_op(): usb_dev_resume+0x0/0x10 [usbcore] returns -1
> PM: Device usb6 failed to resume: error -1
> pm_op(): usb_dev_resume+0x0/0x10 [usbcore] returns -19
> PM: Device 6-1 failed to resume: error -19
> pm_op(): usb_dev_resume+0x0/0x10 [usbcore] returns -19
> PM: Device 6-2 failed to resume: error -19
> PM: Finishing wakeup.
> Restarting tasks ... <7>hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0000
> hub 6-0:1.0: state 0 ports 2 chg 0000 evt 0000
> usb 6-1: USB disconnect, address 2
> usb 6-1: unregistering device
> usb 6-1: usb_disable_device nuking all URBs
> usb 6-1: unregistering interface 6-1:1.0
> done.
> sd 6:0:0:0: [sdb] READ CAPACITY failed
> sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT
> driverbyte=DRIVER_OK,SUGGEST_OK
> sd 6:0:0:0: [sdb] Sense not available.
> sd 6:0:0:0: [sdb] Write Protect is off
> sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
> sd 6:0:0:0: [sdb] Assuming drive cache: write through
> usb 6-1:1.0: uevent
> usb 6-1: uevent
> usb 6-2: USB disconnect, address 3
> usb 6-2: unregistering device
> usb 6-2: usb_disable_device nuking all URBs
> usb 6-2: unregistering interface 6-2:1.0
> scsi 7:0:0:0: rejecting I/O to dead device
> scsi 7:0:0:0: rejecting I/O to dead device
> scsi 7:0:0:0: rejecting I/O to dead device
> scsi 7:0:0:0: rejecting I/O to dead device
> scsi 7:0:0:0: [sdc] READ CAPACITY failed
> scsi 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
> driverbyte=DRIVER_OK,SUGGEST_OK
> scsi 7:0:0:0: [sdc] Sense not available.
> scsi 7:0:0:0: rejecting I/O to dead device
> scsi 7:0:0:0: [sdc] Write Protect is off
> scsi 7:0:0:0: [sdc] Mode Sense: 00 00 00 00
> scsi 7:0:0:0: [sdc] Assuming drive cache: write through
> usb 6-2:1.0: uevent
> usb 6-2: uevent
> scsi 6:0:0:0: rejecting I/O to dead device

Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists