| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1233693822.11344.220.camel@localhost.localdomain> Date: Tue, 03 Feb 2009 15:43:42 -0500 From: Dan Williams <dcbw@...hat.com> To: Chuck Ebbert <cebbert@...hat.com> Cc: Greg KH <greg@...ah.com>, linux-kernel@...r.kernel.org, stable@...nel.org Subject: Re: [stable] A patch in 2.6.27.9 caused device names to change On Tue, 2009-02-03 at 15:14 -0500, Chuck Ebbert wrote: > On Tue, 03 Feb 2009 09:50:11 -0500 > Dan Williams <dcbw@...hat.com> wrote: > > > On Mon, 2009-02-02 at 16:05 -0800, Greg KH wrote: > > > On Mon, Feb 02, 2009 at 05:02:38PM -0500, Chuck Ebbert wrote: > > > > This patch: > > > > http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git;a=blob_plain;f=releases/2.6.27.9/usb-option-add-pantech-cards.patch;hb=HEAD > > > > > > > > replaced my wireless adapter's /dev/ttyACM0 interface with three interfaces: > > > > /dev/ttyUSB[012] > > > > > > > > That broke my ppp connection scripts. And I have to use /dev/ttyUSB1 to connect, > > > > not USB0. Also it looks like Network Manager only knows how to use the first > > > > interface in its auto-connect mode, so people using that also lost their > > > > connections. > > > > > > Ugh, that sucks. > > > > > > That is what is also in upstream, so 2.6.29-rc also fails for you? > > > > > I didn't try it, but it should. I don't have a problem with that, just with > changing the driver in a stable kernel update. > > > > Dan, what's with replacing working devices with the cdc-acm driver with > > > option device ids? Is there some reason you did this? > > > > For a long time we've been operating under the assumption that mobile > > broadband devices should be driven by option and sierra, since those > > drivers had the necessary buffering optimizations to support > > higher-speed mobile broadband devices. That was true at least up until > > 2.6.24. > > > > Furthermore, up until this point, I have not seen mobile broadband > > adapters (that aren't cellphones connected via USB) that *are* CDC-ACM > > compliant. Everything previously has advertised proprietary interfaces, > > some of which are serial ports and some of which are not. > > > > Most mobile broadband cards *do* have more than one TTY, the others are > > used for additional control ports or proprietary access for stuff like > > GPS and flashing the firmware. > > > > Can we get the 'lsusb -v' output for this card? I'm quite curious how > > many endpoints and interfaces the device actually has. > > > > Bus 002 Device 005: ID 106c:3711 Curitel Communications, Inc. Excellent. Thanks for the dump. My original patch is in error, and the ID should indeed be handled by cdc-acm. If we figure out what the additional interfaces are for, we can add matching to other drivers for them, or something like that. Sound OK? Sorry for the error on my end. Dan > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 2 Communications > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x106c Curitel Communications, Inc. > idProduct 0x3711 > bcdDevice 1.00 > iManufacturer 1 PANTECH > iProduct 2 PANTECH USB MODEM > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 113 > bNumInterfaces 4 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0x80 > (Bus Powered) > MaxPower 500mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 2 Communications > bInterfaceSubClass 2 Abstract (modem) > bInterfaceProtocol 1 AT-commands (v.25ter) > iInterface 0 > CDC Header: > bcdCDC 1.09 > CDC Call Management: > bmCapabilities 0x03 > call management > use DataInterface > bDataInterface 1 > CDC ACM: > bmCapabilities 0x0f > connection notifications > sends break > line coding and serial state > get/set/clear comm features > CDC Union: > bMasterInterface 0 > bSlaveInterface 1 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 9 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 10 CDC Data > bInterfaceSubClass 0 Unused > bInterfaceProtocol 0 > iInterface 3 Data Interface > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x85 EP 5 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x03 EP 3 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 2 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x89 EP 9 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x07 EP 7 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 3 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 8 Mass Storage > bInterfaceSubClass 6 SCSI > bInterfaceProtocol 80 Bulk (Zip) > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x86 EP 6 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Device Status: 0x0000 > (Bus Powered) > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists