linux-kernel - Re: Reworking suspend-resume sequence (was: Re: PCI PM: Restore standard config registers of all devices early)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1233694976.16867.90.camel@pasglop>
Date:	Wed, 04 Feb 2009 08:02:56 +1100
From:	Benjamin Herrenschmidt <benh@...nel.crashing.org>
To:	"Rafael J. Wysocki" <rjw@...k.pl>
Cc:	Linus Torvalds <torvalds@...ux-foundation.org>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Jesse Barnes <jesse.barnes@...el.com>,
	Andreas Schwab <schwab@...e.de>, Len Brown <lenb@...nel.org>,
	Ingo Molnar <mingo@...e.hu>
Subject: Re: Reworking suspend-resume sequence (was: Re: PCI PM: Restore
 standard config registers of all devices early)

On Tue, 2009-02-03 at 18:04 +0100, Rafael J. Wysocki wrote:

> > Now, there's one subtle problem with resume in this picture.  Namely, before
> > running the "early resume of devices" we have to make sure that the interrupts
> > will be masked.  However, masking MSI-X, for example, means writing into
> > the memory space of the device, so we can't do it at this point.  Of course, we
> > can assume that MSI/MSI-X will be masked when we get control from the BIOS
> > (moreover, they are not shareable, so we can just ignore them at this point),
> > but still we'll have to mask the other interrupts before doing the
> > local_irq_enable() on resume - marked by the (*) above.  This appears to be
> > doable, though.

Which is why I prefer making mutex/semaphores/allocations "safe" to use
in that late suspend phase with IRQs off.

It sounds like a less invasive thing, simpler, change, allowing to move
the ACPI stuff back to where it belongs, and it would help solving other
problems such as the problems I exposed with video resume, which I'm
trying to do -very- early (ie, before sysdev's even).

In fact, as I may have said elsewhere, I'm also being bitten by the PCI
layer doing kmalloc(...GFP_KERNEL) all over the place nowadays including
in things like pci_get_device() which are hurting some memory controller
code I have that runs in late suspend (I could refactor that code to
do the pci_get_* earlier, it's just one more thing..).

> Having reconsidered it, I think that the "loop of disable_irq()" may be
> problematic due to MSI/MSI-X and devices that are put into D3 during the
> "normal" suspend.  That is, we shouldn't try to mask MSI/MSI-X for devices in
> D3 (especially MSI-X, since that involves writing to the device's memory
> space).  This implies that devices in D3 should be avoided in the "loop of
> disable_irq()", but that could be tricky if we loop over struct irq_desc
> objects.
> 
> Still, we can modify pci_pm_suspend() (and the other PCI callbacks analogously)
> so that it masks the interrupt of the device right before returning to the
> caller if the device has not been put into a low power state before.  After
> that all devices will either be in low power states, so they won't be able to
> generate interrupts, or have their interrupts masked.  In the latter case the
> core can then put them into low power states in suspend_late().

That's going to be hard to get right vs. shared interrupts no ?

I think the "other" solution overall is much more simple.

Cheers,
Ben.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/