BIOS EBDA/lowmem at: 0009f000/0009f000 Initializing cgroup subsys cpuset Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Fri Feb 9 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable) BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS) BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data) BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI 2.5 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0xbffe0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 RAMDISK: 375a8000 - 37fef479 Allocated new RAMDISK: 004a7000 - 00eee479 Move RAMDISK from 00000000375a8000 - 0000000037fef478 to 004a7000 - 00eee478 ACPI: RSDP 000F7FB0, 0024 (r2 RX780 ) ACPI: XSDT BFFE3080, 0044 (r1 RX780 AWRDACPI 42302E31 AWRD 0) ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0) FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4) ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E) ACPI: FACS BFFE0000, 0040 ACPI: HPET BFFE8E40, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98) ACPI: MCFG BFFE8E80, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0) ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0) 2183MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00012000 - 00018f00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54] #4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [00004a7000 - 0000eee479] NEW RAMDISK ==> [00004a7000 - 0000eee479] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f3f00] 000f3f00 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000bffe0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000bffe0 ACPI: PM-Timer IO Port: 0x4008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10b9a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) PERCPU: Allocating 36864 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143 Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0 noresume splash=silent apic=debug console=ttyS0,19200n8 vga=normal Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 3360.372 MHz processor. Console: colour VGA+ 80x25 console [ttyS0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3104320k/3145600k available (1835k kernel code, 39920k reserved, 1095k data, 276k init, 2236296k highmem) virtual kernel memory layout: fixmap : 0xffe19000 - 0xfffff000 (1944 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc03e3000 - 0xc0428000 ( 276 kB) .data : 0xc02caf27 - 0xc03dcc4c (1095 kB) .text : 0xc0100000 - 0xc02caf27 (1835 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 6720.74 BogoMIPS (lpj=13441488) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine Checking 'hlt' instruction... OK. ACPI: Core revision 20080926 Getting VERSION: 80050010 Getting VERSION: 80050010 Getting ID: 0 Getting ID: f000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1312574 ... PM timer delta = 357950 ... PM timer result ok ..... delta 1312574 ..... mult: 56371100 ..... calibration result: 840047 ..... CPU clock speed is 3360.0779 MHz. ..... host bus clock speed is 210.0047 MHz. Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 masked ExtINT on CPU#1 Calibrating delay using timer specific routine.. 6720.40 BogoMIPS (lpj=13440808) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 masked ExtINT on CPU#2 Calibrating delay using timer specific routine.. 6720.39 BogoMIPS (lpj=13440799) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 masked ExtINT on CPU#3 Calibrating delay using timer specific routine.. 6720.41 BogoMIPS (lpj=13440821) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (26881.95 BogoMIPS). net_namespace: 776 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.5: PME# disabled pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:03:00.0: PME# supported from D3hot pci 0000:03:00.0: PME# disabled pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:14.4: transparent bridge ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. PCI: Using ACPI for IRQ routing pci 0000:00:00.0: BAR 3: can't allocate resource ... APIC ID: 00000000 (0) ... APIC VERSION: 80050010 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000010000000000000000 ... APIC ID: 01000000 (1) ... APIC VERSION: 80050010 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000010000000000000000 ... APIC ID: 02000000 (2) ... APIC VERSION: 80050010 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000010000000000001000 ... APIC ID: 03000000 (3) ... APIC VERSION: 80050010 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000010000000000001000 testing the IO APIC....................... .................................... done. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #2 Switched to NOHz mode on CPU #3 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0d: mem resource (0xf0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0d: mem resource (0x0-0x1fffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0d: mem resource (0x100000-0xbffdffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP system 00:01: ioport range 0x4100-0x411f has been reserved system 00:01: ioport range 0x228-0x22f has been reserved system 00:01: ioport range 0x40b-0x40b has been reserved system 00:01: ioport range 0x4d6-0x4d6 has been reserved system 00:01: ioport range 0xc00-0xc01 has been reserved system 00:01: ioport range 0xc14-0xc14 has been reserved system 00:01: ioport range 0xc50-0xc52 has been reserved system 00:01: ioport range 0xc6c-0xc6d has been reserved system 00:01: ioport range 0xc6f-0xc6f has been reserved system 00:01: ioport range 0xcd0-0xcd1 has been reserved system 00:01: ioport range 0xcd2-0xcd3 has been reserved system 00:01: ioport range 0xcd4-0xcdf has been reserved system 00:01: ioport range 0x4000-0x40fe has been reserved system 00:01: ioport range 0x4210-0x4217 has been reserved system 00:01: ioport range 0xb10-0xb1f has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x220-0x225 has been reserved system 00:0d: iomem range 0xfed00000-0xfed000ff has been reserved system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0xd000-0xdfff pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: 0xc000-0xcfff pci 0000:00:04.0: MEM window: 0xfdb00000-0xfdbfffff pci 0000:00:04.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff pci 0000:00:06.0: PCI bridge, secondary bus 0000:03 pci 0000:00:06.0: IO window: 0xb000-0xbfff pci 0000:00:06.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:00:06.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff pci 0000:00:07.0: PCI bridge, secondary bus 0000:04 pci 0000:00:07.0: IO window: 0xe000-0xefff pci 0000:00:07.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:07.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:05 pci 0000:00:14.4: IO window: 0xa000-0xafff pci 0000:00:14.4: MEM window: 0xfd900000-0xfd9fffff pci 0000:00:14.4: PREFETCH window: 0x000000fd800000-0x000000fd8fffff pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 01 index 0 io port: [0xd000-0xdfff] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff] bus: 01 index 2 mmio: [0xc0000000-0xdfffffff] bus: 01 index 3 mmio: [0x0-0x0] bus: 02 index 0 io port: [0xc000-0xcfff] bus: 02 index 1 mmio: [0xfdb00000-0xfdbfffff] bus: 02 index 2 mmio: [0xfda00000-0xfdafffff] bus: 02 index 3 mmio: [0x0-0x0] bus: 03 index 0 io port: [0xb000-0xbfff] bus: 03 index 1 mmio: [0xfdf00000-0xfdffffff] bus: 03 index 2 mmio: [0xfde00000-0xfdefffff] bus: 03 index 3 mmio: [0x0-0x0] bus: 04 index 0 io port: [0xe000-0xefff] bus: 04 index 1 mmio: [0xfdd00000-0xfddfffff] bus: 04 index 2 mmio: [0xfdc00000-0xfdcfffff] bus: 04 index 3 mmio: [0x0-0x0] bus: 05 index 0 io port: [0xa000-0xafff] bus: 05 index 1 mmio: [0xfd900000-0xfd9fffff] bus: 05 index 2 mmio: [0xfd800000-0xfd8fffff] bus: 05 index 3 io port: [0x00-0xffff] bus: 05 index 4 mmio: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 10525k freed audit: initializing netlink socket (disabled) type=2000 audit(1233922326.136:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1717 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport-driver 0000:00:02.0: found MSI capability pcieport-driver 0000:00:04.0: found MSI capability pcieport-driver 0000:00:06.0: found MSI capability pcieport-driver 0000:00:07.0: found MSI capability isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 Using IPI No-Shortcut mode Freeing unused kernel memory: 276k freed doing fast boot Boot logging started on /dev/ttSCSI subsystem initialized yS0(/dev/consolepata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) ) at Fri Feb 6 pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 12:12:07 2009 scsi0 : pata_jmicron scsi1 : pata_jmicron FATAL: Module prata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19 ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19 ocessor not found. FATAL: Module thermal not found. logips2pp: Detected unknown logitech mouse model 11 ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 input: ImPS/2 Logitech Wheel Mouse as /class/input/input2 ata3: softreset failed (device not ready) ata3: failed due to HW bug, retry pmp=0 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata4: softreset failed (device not ready) ata4: failed due to HW bug, retry pmp=0 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata5: softreset failed (device not ready) ata5: failed due to HW bug, retry pmp=0 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) ata5.00: SB600 AHCI: limiting to 255 sectors per cmd ata5.00: SB600 AHCI: limiting to 255 sectors per cmd ata5.00: configured for UDMA/133 ata6: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part scsi6 : ahci scsi7 : ahci ata7: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe100 irq 18 ata8: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe180 irq 18 ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) Uniform Multi-Platform E-IDE driver atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00) ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 atiixp 0000:00:14.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf900-0xf907 hda: ST3120023A, ATA DISK drive hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive hda: UDMA/100 mode selected hdb: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 aic7xxx 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs FATAL: Module fan not found. BIOS EDD facility v0.16 2004-Jun-25, 4 devices found sky2 driver version 1.22 sky2 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 5 sky2 0000:04:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller sky2 eth0: addr 00:e0:4d:7a:8c:ee Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. Creating device nodes with udev Driver 'sd' needs updating - please use bus_type methods usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ohci_hcd 0000:00:13.0: OHCI Host Controller sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 sd 2:0:0:0: [sda] Attached SCSI disk sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 > ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 sd 3:0:0:0: [sdb] Attached SCSI disk sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 4:0:0:0: [sdc] Attached SCSI disk usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd usb usb1: SerialNumber: 0000:00:13.0 ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 usb 1-1: new full speed USB device using ohci_hcd and address 2 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.28.3-250Hz ehci_hcd usb usb2: SerialNumber: 0000:00:13.5 ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 hub 1-0:1.0: unable to enumerate USB device on port 1 ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 usb 2-1: new high speed USB device using ehci_hcd and address 2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-1: configuration #1 chosen from 1 choice usb 2-1: New USB device found, idVendor=03f0, idProduct=5111 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: Photosmart 3200 series usb 2-1: Manufacturer: HP usb 2-1: SerialNumber: MY5B98310Z045K usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb 2-2: new high speed USB device using ehci_hcd and address 3 usb usb4: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd usb usb4: SerialNumber: 0000:00:13.2 ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected usb 2-2: New USB device found, idVendor=0424, idProduct=2504 usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd usb usb5: SerialNumber: 0000:00:13.3 ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd usb usb6: SerialNumber: 0000:00:13.4 Waiting for device /dev/sda5 to appear: ok showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel fsck 1.40.8 (13-Mar-2008) [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda5 /dev/sda5: Superblock last write time is in the future. FIXED. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. /dev/sda5: clean, 340719/3280320 files, 4444849/6554512 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/sda5 INIT: version 2.86 booting System Boot Control: Running /etc/init.d/boot Mounting procfs at /proc done Mounting sysfs at /sys done Mounting debugfs at /sys/kernel/debug done Initializing /dev done Mounting devpts at /dev/pts done done Starting udevd: sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 3:0:0:0: Attached scsi generic sg1 type 0 sd 4:0:0:0: Attached scsi generic sg2 type 0 e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 e1000e: Copyright (c) 1999-2008 Intel Corporation. ide-gd driver 1.18 hda: max request size: 128KiB hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ide-cd driver 5.00 ide-cd: hdb: ATAPI 32X DVD-ROM DVD-R CD-R/RW<6>Linux agpgart interface v0.103 drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown ATAPI device hdb: Error: Illegal request -- (Sense key=0x05) Logical block address out of range -- (asc=0x21, ascq=0x00) The failed "Read 10" packet command was: "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 " end_request: I/O error, dev hdb, sector 0 Buffer I/O error on device hdb, logical block 0 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown ATAPI device hdb: Error: Illegal request -- (Sense key=0x05) Logical block address out of range -- (asc=0x21, ascq=0x00) The failed "Read 10" packet command was: "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 " end_request: I/O error, dev hdb, sector 0 Buffer I/O error on device hdb, logical block 0 IT8718 SuperIO detected. parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111 usbcore: registered new interface driver usblp 0000:02:00.0: eth1: MAC: 1, PHY: 4, PBA No: d50854-003 piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 Initializing USB Mass Storage driver... scsi9 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs ppdev: user-space parallel port driver HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... done Loading required kernel modules done Activating swap-devices in /etc/fstabAdding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k ... done showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel mount: according to mtab, /dev/sda5 is already mounted on / Setting up the hardware clock done device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com Activating device mapper... done Checking file systems... fsck 1.40.8 (13-Mar-2008) Checking all file systems. [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 131/131616 files, 88873/263056 blocks [/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/sda6 /dev/sda6: clean, 84117/5903072 files, 2654384/11797726 blocks [/sbin/fsck.ext3 (1) -- /local] fsck.ext3 -a /dev/sda7 /dev/sda7: clean, 364115/8536064 files, 10489587/17040940 blocks [/sbin/fsck.ext3 (1) -- /usr/local] fsck.ext3 -a /dev/sda8 /dev/sda8: clean, 10011/656000 files, 560507/1311297 blocks [/sbin/fsck.ext3 (1) -- /usr/src] fsck.ext3 -a /dev/sda9 /dev/sda9: clean, 1203258/6557152 files, 11314704/13109032 blocks [/sbin/fsck.ext3 (1) -- /misc] fsck.ext3 -a /dev/sda10 /dev/sda10: clean, 13/12992512 files, 455787/25967056 blocks [/sbin/fsck.ext3 (1) -- /lcrs] fsck.ext3 -a /dev/hda1 /dev/hda1: clean, 32325/14663680 files, 24187969/29302552 blocks [/sbin/fsck.ext3 (1) -- /compro] fsck.ext3 -a /dev/sdc1 /dev/sdc1: clean, 1261027/39075840 files, 12160814/78142160 blocks done oop: module loaded 5h done Mokjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. unting local file systems... proc on /proc typekjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernekjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. l/debug type debugfs (rw) udev on /dev type tmpkjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. fs (rw) devpts on /dev/pts type devpts (rw,modekjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. =0620,gid=5) /dev/sda1 on /boot type ext3 (rw,acl,user_xattr) /dev/sda6 on /hokjournald starting. Commit interval 5 seconds EXT3 FS on sda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. me type ext3 (rw,acl,user_xattr)kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. /dev/sda7 on /local type ext3 (rw,acl,user_xatkjournald starting. Commit interval 5 seconds EXT3 FS on sdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. tr) /dev/sda8 on /usr/local type ext3 (rw,acl,user_xattr) /dev/sda9 on /usr/src type ext3 (rw,acl,user_xattr) /dev/sda10 on /misc type ext3 (rw,acl,user_xattr) /dev/hda1 on /lcrs type ext3 (rw) /dev/sdc1 on /compro type ext3 (rw,acl,user_xattr) done Retry device configuration: done Configuring serial ports... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A Configured serial ports done Setting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 fs.inotify.max_user_watches = 65536 net.ipv4.conf.default.promote_secondaries = 1 net.ipv4.conf.all.promote_secondaries = 1 done fuse init (API version 7.10) Loading fuse module done Mounting fuse control filesystem done scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2 sd 9:0:0:0: [sdd] Attached SCSI removable disk Mounting securitsd 9:0:0:0: Attached scsi generic sg3 type 0 yfs on /sys/kernel/security done ls: cannot access /sys/module/apparmor: No such file or directory ls: cannot access /sys/module/apparmor: No such file or directory Loading AppArmor module failed Enabling syn flood protection done Disabling IP forwarding done done Creating /var/log/boot.msg done showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel Activating remaining swap-devices in /etc/fstab... done Setting up hostname 'harley' done Setting up loopback interface lo lo IP address: 127.0.0.1/8 IP address: 127.0.0.2/8 done System Boot Control: The system has been set up Failed features: boot.apparmor Skipped features: boot.cycle System Boot Control: Running /etc/init.d/boot.local kernel.shmmax = 81943040 done INIT: Entering runlevel: 5 Boot logging started on /dev/ttyS0(/dev/console) at Fri Feb 6 12:12:43 2009 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Starting resource manager done acpid: starting up Starting acpid done acpid: 1 rule loaded Starting D-Bus daemonStarting syslog services done Initializing random number generator done done Starting ConsoleKit done NET: Registered protocol family 10 lo: Disabled Privacy Extensions Loading CPUFreq modules (CPUFreqip6_tables: (C) 2000-2006 Netfilter Core Team not supported) Starting HAL daemonip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Starting Firewall Initialization (phase 1 of 2) done cdrom: This disc doesn't have any tracks I recognize! done Setting up network interfaces: lo lo IP address: 127.0.0.1/8 IP address: 127.0.0.2/8 done eth0 device: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 13) eth0 IP address: 10.10.10.100/24 done eth1 device: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06) eth1 IP address: 192.168.10.100/24 done Waiting for mandatory devices: eth2 eth3 __NSC__ 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 eth2 No interface found failed eth3 No interface found failed Setting up service network . . . . . . . . . . . . . . failed Starting service kdm done Mount CIFS File Systems unused Starting RPC portmap daemon done VMware Server is installed, but it has not been (correctly) configured for the running kernel. To (re-)configure it, invoke the following command: /usr/bin/vmware-config.pl. Starting auditd done Starting cupsd done Starting SSH daemon done Starting Avahi daemon. done Starting Avahi DNS Configuration daemon done Loading keymap i386/qwerty/us.map.gz done Loading compose table latin1.add done Start Unicode mode done Loading console font lat9w-16.psfu -m trivial G0:loadable done ntpd: time set -0.245441s Starting network time protocol daemon (NTPD) done Starting Name Service Cache Daemon done Starting mail service (Postfix) done Starting CRON daemon done Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext' done done