Probing EDD (edd=off to disable)...Linux version 2.6.29-rc3john (jstultz@kernel) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #8 SMP PREEMPT Fri Feb 6 16:32:39 PST 2009 Command line: root=/dev/sda3 ro crashkernel=128M@32M console=tty1 console=ttyS1,19200 apic=debug KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c000 (usable) BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffa3a00 (usable) BIOS-e820: 00000000cffa3a00 - 00000000cffa7400 (ACPI data) [ BIOS-e820: 00000000cffa7400 - 00000000d0000000 (reserved) BIOS-e820: 00000000f4000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) DMI 2.4 present. last_pfn = 0x230000 max_arch_pfn = 0x100000000 last_pfn = 0xcffa3 max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000cffa3000 last_map_addr: cffa3000 end: cffa3000 init_memory_mapping: 0000000100000000-0000000230000000 last_map_addr: 230000000 end: 230000000 RAMDISK: 37d8a000 - 37fef34b ACPI: RSDP 000FDFE0, 0014 (r0 IBM ) ACPI: RSDT CFFA7380, 0034 (r1 IBM SERLEWIS 1000 IBM 45444F43) ACPI: FACP CFFA72C0, 0084 (r2 IBM SERLEWIS 1000 IBM 45444F43) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) FADT: X_PM1b_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT CFFA3A00, 35FC (r1 IBM SERLEWIS 1000 INTL 20060912) ACPI: FACS CFFA7080, 0040 ACPI: APIC CFFA7200, 0090 (r1 IBM SERLEWIS 1000 IBM 45444F43) ACPI: SRAT CFFA7100, 00E8 (r1 AMD HAMMER 1 AMD 1) ACPI: HPET CFFA70C0, 0038 (r1 IBM SERLEWIS 1000 IBM 45444F43) (7 early reservations) ==> bootmem [0000000000 - 0230000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001e96558] TEXT DATA BSS ==> [0001000000 - 0001e96558] #3 [0037d8a000 - 0037fef34b] RAMDISK ==> [0037d8a000 - 0037fef34b] #4 [000009c000 - 0000100000] BIOS reserved ==> [000009c000 - 0000100000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #6 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000] Scan SMP from ffff880000000000 for 1024 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. Scan SMP from ffff8800000f0000 for 65536 bytes. Scan SMP from ffff88000009c000 for 1024 bytes. found SMP MP-table at [ffff88000009c140] 0009c140 Reserving 128MB of memory at 32MB for crashkernel (System RAM: 8960MB) Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00230000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009c 0: 0x00000100 -> 0x000cffa3 0: 0x00100000 -> 0x00230000 Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x488 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 14, version 0, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[16]) IOAPIC[1]: apic_id 13, version 0, address 0xfec02000, GSI 16-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x1166a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs mapped APIC to ffffffffff5fc000 (fee00000) mapped IOAPIC to ffffffffff5fb000 (fec00000) mapped IOAPIC to ffffffffff5fa000 (fec02000) Allocating PCI resources starting at d4000000 (gap: d0000000:24000000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Allocating 40960 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065485 Kernel command line: root=/dev/sda3 ro crashkernel=128M@32M console=tty1 console=ttyS1,19200 apic=debug Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2600.065 MHz processor. Console: colour VGA+ 80x25 console [tty1] enabled console [ttyS1] enabled Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ f4000000 size 64 MB Node 1: aperture @ f4000000 size 64 MB Memory: 8098608k/9175040k available (8336k kernel code, 787204k absent, 288288k reserved, 4652k data, 496k init) HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.13 BogoMIPS (lpj=2600065) Security Framework initialized SELinux: Initializing. Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20081204 Setting APIC routing to flat Getting VERSION: 80050010 Getting VERSION: 80050010 Getting ID: 0 Getting ID: ff000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ESR value before enabling vector: 0x00000004 after: 0x00000000 ENABLING IO-APIC IRQs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 2) ... ....... failed. ...trying to set up timer as Virtual Wire IRQ... ..... failed. ...trying to set up timer as ExtINT IRQ... ..... failed :(. Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option. ------------[ cut here ]------------ WARNING: at kernel/smp.c:329 smp_call_function_many+0x1c4/0x220() Hardware name: BladeCenter LS21 -[7971AC1]- Pid: 1, comm: swapper Not tainted 2.6.29-rc3john #8 Call Trace: [] warn_slowpath+0xd7/0x100 [] ? _spin_unlock+0x10/0x40 [] ? vt_console_print+0x22c/0x2f0 [] ? __call_console_drivers+0x66/0x80 [] ? _spin_lock_irqsave+0x22/0x50 [] ? _spin_unlock_irqrestore+0x12/0x40 [] ? up+0x35/0x50 [] ? _spin_unlock_irqrestore+0x12/0x40 [] ? release_console_sem+0x1d4/0x1f0 [] ? vprintk+0x2c1/0x3f0 [] ? __call_console_drivers+0x66/0x80 [] ? printk+0x67/0x70 [] smp_call_function_many+0x1c4/0x220 [] ? stop_this_cpu+0x0/0x30 [] ? up+0x35/0x50 [] ? stop_this_cpu+0x0/0x30 [] smp_call_function+0x3f/0x80 [] native_smp_send_stop+0x23/0x40 [] panic+0xb9/0x180 [] ? delay_tsc+0x6f/0xb0 [] ? __delay+0xa/0x10 [] ? __const_udelay+0x49/0x50 [] setup_IO_APIC+0x85b/0x860 [] ? clear_IO_APIC+0x3d/0x70 [] ? setup_apic_nmi_watchdog+0x49/0xc0 [] native_smp_prepare_cpus+0x3aa/0x430 [] kernel_init+0x58/0x1b0 [] child_rip+0xa/0x20 [] ? kernel_init+0x0/0x1b0 [] ? child_rip+0x0/0x20 ---[ end trace 4eaa2a86a8e2da22 ]---