| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <498F2666.8040108@gmail.com> Date: Sun, 08 Feb 2009 12:37:26 -0600 From: Robert Hancock <hancockrwd@...il.com> To: linux-kernel@...r.kernel.org Cc: Alan Cox <alan@...rguk.ukuu.org.uk>, Tejun Heo <tj@...nel.org>, linux-kernel@...r.kernel.org, Arjan van de Ven <arjan@...radead.org>, ide <linux-ide@...r.kernel.org> Subject: Re: [bug] sata detection problem (ccing linux-ide) Ingo Molnar wrote: > Hm, in a boot test i had this boot failure: > > [ 15.504053] calling piix_init+0x0/0x30 @ 1 > [ 15.508050] ata_piix 0000:00:1f.1: version 2.12 > [ 15.516193] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 > [ 15.520029] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 > [ 15.524072] ata_piix 0000:00:1f.1: setting latency timer to 64 > [ 15.528115] scsi0 : ata_piix > [ 15.531526] scsi1 : ata_piix > [ 15.544044] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 > [ 15.548028] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 > [ 15.716358] ata1.00: ATAPI: �V�V�V�V�V������������������������������, �.�V�V�V, max UDMA7 > [ 15.720044] ata1.00: limited to UDMA/33 due to 40-wire cable > [ 15.740296] ata1.00: configured for UDMA/33 > [ 15.744117] async_waiting @ 1 > [ 15.748027] async_continuing @ 1 after 0 usec > [ 15.752066] isa bounce pool size: 16 pages > [ 15.756124] scsi scan: INQUIRY result too short (5), using 36 > [ 15.760030] scsi 0:0:0:0: Direct-Access PQ: 0 ANSI: 5 > [ 15.768197] sd 0:0:0:0: [sda] Attached SCSI removable disk > [ 15.772359] async_waiting @ 1 > [ 15.776047] async_continuing @ 1 after 0 usec > [ 15.940033] async_waiting @ 1 > [ 15.944027] async_continuing @ 1 after 0 usec > [ 15.948613] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 > [ 15.952029] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 > [ 15.956030] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > [ 15.961683] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 15.964087] scsi2 : ata_piix > [ 15.968192] scsi3 : ata_piix > [ 15.972153] ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 11 > [ 15.976028] ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 11 > [ 16.176051] ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 > [ 16.180027] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 16.248061] ata3.00: configured for UDMA/133 > [ 16.252031] async_waiting @ 1 > [ 16.256027] async_continuing @ 1 after 0 usec > [ 16.260175] scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 > [ 16.264348] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) > [ 16.268056] sd 2:0:0:0: [sdb] Write Protect is off > [ 16.272028] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 16.276097] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 16.280135] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) > [ 16.284055] sd 2:0:0:0: [sdb] Write Protect is off > [ 16.288028] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 16.292078] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 16.296029] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > > [ 16.337818] sd 2:0:0:0: [sdb] Attached SCSI disk > [ 16.340313] async_waiting @ 1 > [ 16.344028] async_continuing @ 1 after 0 usec > [ 16.508033] async_waiting @ 1 > [ 16.512027] async_continuing @ 1 after 0 usec > [ 16.516143] initcall piix_init+0x0/0x30 returned 0 after 984375 usecs > [ 16.520029] calling sil_init+0x0/0x20 @ 1 > > Look at the weird sda detection. The only _real_ device on this system is the > ST3320620AS disk which got detected as sdb. But the bogus sda entry crashed the > (older) OS installation on the box: > > [ 20.132252] VFS: Cannot open root device "sda3" or unknown-block(0,0) > > Find below a successful bootup. Bug is very sporadic. (seems timing related) > > Ingo > > [ 0.000000] Linux version 2.6.29-rc3-00697-gae1a25d (mingo@...ebaran) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #52 Sun Feb 8 06:54:35 CET 2009 > [ 0.000000] Command line: root=/dev/sda3 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 3 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable) > [ 0.000000] BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data) > [ 0.000000] BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) > [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) > [ 0.000000] console [earlyser0] enabled > [ 0.000000] debug: ignoring loglevel setting. > [ 0.000000] DMI 2.3 present. > [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. > [ 0.000000] last_pfn = 0x7ffa0 max_arch_pfn = 0x100000000 > [ 0.000000] Scanning 0 areas for low memory corruption > [ 0.000000] modified physical RAM map: > [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) > [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) > [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) > [ 0.000000] modified: 0000000000100000 - 000000007ffa0000 (usable) > [ 0.000000] modified: 000000007ffa0000 - 000000007ffae000 (ACPI data) > [ 0.000000] modified: 000000007ffae000 - 000000007ffe0000 (ACPI NVS) > [ 0.000000] modified: 000000007ffe0000 - 0000000080000000 (reserved) > [ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved) > [ 0.000000] init_memory_mapping: 0000000000000000-000000007ffa0000 > [ 0.000000] 0000000000 - 007fe00000 page 2M > [ 0.000000] 007fe00000 - 007ffa0000 page 4k > [ 0.000000] kernel direct mapping tables up to 7ffa0000 @ 10000-14000 > [ 0.000000] last_map_addr: 7ffa0000 end: 7ffa0000 > [ 0.000000] ACPI: RSDP 000FACD0, 0024 (r2 ACPIAM) > [ 0.000000] ACPI: XSDT 7FFA0100, 0044 (r1 A M I OEMXSDT 10000630 MSFT 97) > [ 0.000000] ACPI: FACP 7FFA0290, 00F4 (r3 A M I OEMFACP 10000630 MSFT 97) > [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) > [ 0.000000] ACPI: DSDT 7FFA0410, 8318 (r1 A0227 A0227000 0 INTL 2002026) > [ 0.000000] ACPI: FACS 7FFAE000, 0040 > [ 0.000000] ACPI: APIC 7FFA0390, 0080 (r1 A M I OEMAPIC 10000630 MSFT 97) > [ 0.000000] ACPI: OEMB 7FFAE040, 0066 (r1 A M I AMI_OEM 10000630 MSFT 97) > [ 0.000000] ACPI: MCFG 7FFA8730, 003C (r1 A M I OEMMCFG 10000630 MSFT 97) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 007ffa0000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > [ 0.000000] #2 [0000200000 - 00013be814] TEXT DATA BSS ==> [0000200000 - 00013be814] > [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] > [ 0.000000] #4 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] > [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. > [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. > [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. > [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780 > [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001600000-ffff8800031fffff] on node 0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x00100000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x0007ffa0 > [ 0.000000] On node 0 totalpages: 524079 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 103 pages reserved > [ 0.000000] DMA zone: 3824 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 7111 pages used for memmap > [ 0.000000] DMA32 zone: 512985 pages, LIFO batch:31 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000) > [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) > [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7fb80000) > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516809 > [ 0.000000] Kernel command line: root=/dev/sda3 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 3 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled > [ 0.000000] debug: sysrq always enabled. > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 3456.959 MHz processor. > [ 0.004000] Console: colour VGA+ 80x25 > [ 0.004000] console handover: boot [earlyser0] -> real [tty0] > [ 0.004000] console [ttyS0] enabled > [ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > [ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > [ 0.004000] Checking aperture... > [ 0.004000] No AGP bridge found > [ 0.004000] Memory: 2045728k/2096768k available (9108k kernel code, 452k absent, 50196k reserved, 5116k data, 660k init) > [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 6913.91 BogoMIPS (lpj=13827836) > [ 0.012066] Security Framework initialized > [ 0.016043] Mount-cache hash table entries: 256 > [ 0.024104] CPU: Trace cache: 12K uops, L1 D cache: 16K > [ 0.028003] CPU: L2 cache: 2048K > [ 0.032018] CPU0: Thermal monitoring enabled (TM1) > [ 0.036004] using mwait in idle threads. > [ 0.040003] CPU: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02 > [ 0.051273] ACPI: Core revision 20081204 > [ 0.088087] calling spawn_ksoftirqd+0x0/0x40 @ 1 > [ 0.092032] initcall spawn_ksoftirqd+0x0/0x40 returned 0 after 0 usecs > [ 0.096005] calling relay_init+0x0/0x8 @ 1 > [ 0.100004] initcall relay_init+0x0/0x8 returned 0 after 0 usecs > [ 0.104004] calling tracer_alloc_buffers+0x0/0x10b @ 1 > [ 0.108352] initcall tracer_alloc_buffers+0x0/0x10b returned 0 after 0 usecs > [ 0.112005] Setting APIC routing to flat > [ 0.116008] enabled ExtINT on CPU#0 > [ 0.120142] ENABLING IO-APIC IRQs > [ 0.124003] init IO_APIC IRQs > [ 0.128003] 2-0 (apicid-pin) not connected > [ 0.132008] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) > [ 0.136007] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) > [ 0.140006] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) > [ 0.144005] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) > [ 0.148005] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) > [ 0.152005] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) > [ 0.156005] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) > [ 0.160005] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) > [ 0.164005] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) > [ 0.168005] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) > [ 0.172005] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) > [ 0.176005] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) > [ 0.180005] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) > [ 0.184005] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) > [ 0.188005] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) > [ 0.192003] 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected > [ 0.200149] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.246106] Using local APIC timer interrupts. > [ 0.246106] calibrating APIC timer ... > [ 0.252001] ... lapic delta = 1440414 > [ 0.252001] ..... delta 1440414 > [ 0.252001] ..... mult: 61861443 > [ 0.252001] ..... calibration result: 921864 > [ 0.252001] ..... CPU clock speed is 3456.3980 MHz. > [ 0.252001] ..... host bus clock speed is 230.1864 MHz. > [ 0.252001] ... verify APIC timer > [ 0.360045] ... jiffies delta = 25 > [ 0.363490] ... jiffies result ok > [ 0.366127] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 > [ 0.368006] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs > [ 0.372005] calling net_ns_init+0x0/0x182 @ 1 > [ 0.376003] net_namespace: 1352 bytes > [ 0.380007] initcall net_ns_init+0x0/0x182 returned 0 after 3906 usecs > [ 0.384004] calling cpufreq_tsc+0x0/0x28 @ 1 > [ 0.388003] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs > [ 0.392005] calling print_banner+0x0/0xe @ 1 > [ 0.396003] Booting paravirtualized kernel on bare hardware > [ 0.400004] initcall print_banner+0x0/0xe returned 0 after 3906 usecs > [ 0.404004] calling sysctl_init+0x0/0x16 @ 1 > [ 0.408007] initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs > [ 0.412004] calling ksysfs_init+0x0/0xbb @ 1 > [ 0.416108] initcall ksysfs_init+0x0/0xbb returned 0 after 0 usecs > [ 0.420004] calling async_init+0x0/0x4b @ 1 > [ 0.424186] initcall async_init+0x0/0x4b returned 0 after 0 usecs > [ 0.428117] calling init_jiffies_clocksource+0x0/0x12 @ 1 > [ 0.432006] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs > [ 0.436004] calling pm_init+0x0/0x43 @ 1 > [ 0.440010] initcall pm_init+0x0/0x43 returned 0 after 0 usecs > [ 0.444005] calling filelock_init+0x0/0x2e @ 1 > [ 0.448010] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs > [ 0.452004] calling init_misc_binfmt+0x0/0x44 @ 1 > [ 0.456007] initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 usecs > [ 0.460004] calling init_script_binfmt+0x0/0x12 @ 1 > [ 0.464005] initcall init_script_binfmt+0x0/0x12 returned 0 after 0 usecs > [ 0.468004] calling init_elf_binfmt+0x0/0x12 @ 1 > [ 0.472005] initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 usecs > [ 0.476004] calling init_compat_elf_binfmt+0x0/0x12 @ 1 > [ 0.480005] initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 usecs > [ 0.484004] calling debugfs_init+0x0/0x56 @ 1 > [ 0.488009] initcall debugfs_init+0x0/0x56 returned 0 after 0 usecs > [ 0.492005] calling random32_init+0x0/0xad @ 1 > [ 0.496005] initcall random32_init+0x0/0xad returned 0 after 0 usecs > [ 0.500007] calling gnttab_init+0x0/0x1d0 @ 1 > [ 0.504005] initcall gnttab_init+0x0/0x1d0 returned -19 after 0 usecs > [ 0.508004] calling cpufreq_core_init+0x0/0x2c @ 1 > [ 0.512004] initcall cpufreq_core_init+0x0/0x2c returned 0 after 0 usecs > [ 0.516004] calling cpuidle_init+0x0/0x20 @ 1 > [ 0.520010] initcall cpuidle_init+0x0/0x20 returned 0 after 0 usecs > [ 0.524004] calling sock_init+0x0/0x60 @ 1 > [ 0.528038] initcall sock_init+0x0/0x60 returned 0 after 0 usecs > [ 0.532005] calling netpoll_init+0x0/0x27 @ 1 > [ 0.536005] initcall netpoll_init+0x0/0x27 returned 0 after 0 usecs > [ 0.540005] calling netlink_proto_init+0x0/0x16f @ 1 > [ 0.544023] NET: Registered protocol family 16 > [ 0.548026] initcall netlink_proto_init+0x0/0x16f returned 0 after 3906 usecs > [ 0.552005] calling bdi_class_init+0x0/0x41 @ 1 > [ 0.556104] initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs > [ 0.560004] calling kobject_uevent_init+0x0/0x49 @ 1 > [ 0.564023] initcall kobject_uevent_init+0x0/0x49 returned 0 after 0 usecs > [ 0.568005] calling gpiolib_sysfs_init+0x0/0x9b @ 1 > [ 0.572096] initcall gpiolib_sysfs_init+0x0/0x9b returned 0 after 0 usecs > [ 0.576004] calling pcibus_class_init+0x0/0x19 @ 1 > [ 0.580149] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs > [ 0.584004] calling pci_driver_init+0x0/0x14 @ 1 > [ 0.588113] initcall pci_driver_init+0x0/0x14 returned 0 after 0 usecs > [ 0.592005] calling backlight_class_init+0x0/0x60 @ 1 > [ 0.596130] initcall backlight_class_init+0x0/0x60 returned 0 after 0 usecs > [ 0.600006] calling xenbus_probe_init+0x0/0x167 @ 1 > [ 0.604020] initcall xenbus_probe_init+0x0/0x167 returned -19 after 0 usecs > [ 0.608005] calling tty_class_init+0x0/0x31 @ 1 > [ 0.612085] initcall tty_class_init+0x0/0x31 returned 0 after 0 usecs > [ 0.616005] calling vtconsole_class_init+0x0/0xcc @ 1 > [ 0.620196] initcall vtconsole_class_init+0x0/0xcc returned 0 after 0 usecs > [ 0.624006] calling i2c_init+0x0/0x6b @ 1 > [ 0.628266] i2c-core: driver [dummy] registered > [ 0.632006] initcall i2c_init+0x0/0x6b returned 0 after 3906 usecs > [ 0.636027] calling amd_postcore_init+0x0/0x45 @ 1 > [ 0.640005] initcall amd_postcore_init+0x0/0x45 returned 0 after 0 usecs > [ 0.644004] calling arch_kdebugfs_init+0x0/0x31 @ 1 > [ 0.648008] initcall arch_kdebugfs_init+0x0/0x31 returned 0 after 0 usecs > [ 0.652004] calling ffh_cstate_init+0x0/0x37 @ 1 > [ 0.656005] initcall ffh_cstate_init+0x0/0x37 returned 0 after 0 usecs > [ 0.660004] calling acpi_pci_init+0x0/0x5a @ 1 > [ 0.664004] ACPI: bus type pci registered > [ 0.668005] initcall acpi_pci_init+0x0/0x5a returned 0 after 3906 usecs > [ 0.672004] calling init_acpi_device_notify+0x0/0x4b @ 1 > [ 0.676004] initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 usecs > [ 0.680004] calling dmi_id_init+0x0/0x30f @ 1 > [ 0.684224] initcall dmi_id_init+0x0/0x30f returned 0 after 0 usecs > [ 0.688005] calling pci_arch_init+0x0/0x6a @ 1 > [ 0.692074] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support. > [ 0.696003] PCI: Using configuration type 1 for base access > [ 0.700011] initcall pci_arch_init+0x0/0x6a returned 0 after 7812 usecs > [ 0.704004] calling topology_init+0x0/0x16 @ 1 > [ 0.708086] initcall topology_init+0x0/0x16 returned 0 after 0 usecs > [ 0.712004] calling param_sysfs_init+0x0/0x1eb @ 1 > [ 0.750429] initcall param_sysfs_init+0x0/0x1eb returned 0 after 31250 usecs > [ 0.752009] calling pm_sysrq_init+0x0/0x20 @ 1 > [ 0.756290] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs > [ 0.760310] calling readahead_init+0x0/0x3b @ 1 > [ 0.764858] initcall readahead_init+0x0/0x3b returned 0 after 0 usecs > [ 0.768006] calling init_bio+0x0/0xda @ 1 > [ 0.772171] bio: create slab <bio-0> at 0 > [ 0.776098] initcall init_bio+0x0/0xda returned 0 after 3906 usecs > [ 0.780005] calling integrity_init+0x0/0x38 @ 1 > [ 0.784040] initcall integrity_init+0x0/0x38 returned 0 after 0 usecs > [ 0.788006] calling cryptomgr_init+0x0/0x3a @ 1 > [ 0.792130] initcall cryptomgr_init+0x0/0x3a returned 0 after 0 usecs > [ 0.796018] calling blk_settings_init+0x0/0x2c @ 1 > [ 0.800005] initcall blk_settings_init+0x0/0x2c returned 0 after 0 usecs > [ 0.804004] calling blk_ioc_init+0x0/0x2a @ 1 > [ 0.808007] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs > [ 0.812004] calling blk_softirq_init+0x0/0x35 @ 1 > [ 0.816004] initcall blk_softirq_init+0x0/0x35 returned 0 after 0 usecs > [ 0.820004] calling genhd_device_init+0x0/0x7e @ 1 > [ 0.824139] initcall genhd_device_init+0x0/0x7e returned 0 after 0 usecs > [ 0.828005] calling blk_dev_integrity_init+0x0/0x2a @ 1 > [ 0.832058] initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs > [ 0.836006] calling gpiolib_debugfs_init+0x0/0x24 @ 1 > [ 0.840010] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs > [ 0.844005] calling pca953x_init+0x0/0x17 @ 1 > [ 0.848098] i2c-core: driver [pca953x] registered > [ 0.852006] initcall pca953x_init+0x0/0x17 returned 0 after 3906 usecs > [ 0.856039] calling pci_slot_init+0x0/0x50 @ 1 > [ 0.860011] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs > [ 0.864005] calling fbmem_init+0x0/0x95 @ 1 > [ 0.868105] initcall fbmem_init+0x0/0x95 returned 0 after 0 usecs > [ 0.872006] calling acpi_init+0x0/0x239 @ 1 > [ 0.877001] ACPI: EC: Look up EC in DSDT > [ 0.955936] ACPI: Interpreter enabled > [ 0.956007] ACPI: (supports S0 S1 S3 S5) > [ 0.961328] ACPI: Using IOAPIC for interrupt routing > [ 0.964162] initcall acpi_init+0x0/0x239 returned 0 after 85937 usecs > [ 0.968006] calling acpi_scan_init+0x0/0x109 @ 1 > [ 1.009244] initcall acpi_scan_init+0x0/0x109 returned 0 after 35156 usecs > [ 1.012064] calling acpi_ec_init+0x0/0x61 @ 1 > [ 1.016100] initcall acpi_ec_init+0x0/0x61 returned 0 after 0 usecs > [ 1.020006] calling dock_init+0x0/0x8d @ 1 > [ 1.024443] ACPI: No dock devices found. > [ 1.028006] initcall dock_init+0x0/0x8d returned 0 after 3906 usecs > [ 1.032005] calling acpi_pci_root_init+0x0/0x28 @ 1 > [ 1.036171] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 1.040213] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > [ 1.044006] pci 0000:00:01.0: PME# disabled > [ 1.048194] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd7cf8000-0xd7cfbfff] > [ 1.052044] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 1.056006] pci 0000:00:1b.0: PME# disabled > [ 1.060060] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 1.064006] pci 0000:00:1c.0: PME# disabled > [ 1.068063] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold > [ 1.072006] pci 0000:00:1c.3: PME# disabled > [ 1.076049] pci 0000:00:1d.0: reg 20 io port: [0x7000-0x701f] > [ 1.080052] pci 0000:00:1d.1: reg 20 io port: [0x7400-0x741f] > [ 1.084051] pci 0000:00:1d.2: reg 20 io port: [0x7800-0x781f] > [ 1.088051] pci 0000:00:1d.3: reg 20 io port: [0x8000-0x801f] > [ 1.092056] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd7cff800-0xd7cffbff] > [ 1.096050] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 1.100006] pci 0000:00:1d.7: PME# disabled > [ 1.104129] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 > [ 1.108009] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO > [ 1.112006] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO > [ 1.116007] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) > [ 1.120045] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] > [ 1.124008] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] > [ 1.128008] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] > [ 1.132008] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] > [ 1.136008] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] > [ 1.140065] pci 0000:00:1f.2: reg 10 io port: [0x9800-0x9807] > [ 1.144008] pci 0000:00:1f.2: reg 14 io port: [0x9400-0x9403] > [ 1.148007] pci 0000:00:1f.2: reg 18 io port: [0x9000-0x9007] > [ 1.152007] pci 0000:00:1f.2: reg 1c io port: [0x8800-0x8803] > [ 1.156007] pci 0000:00:1f.2: reg 20 io port: [0x8400-0x840f] > [ 1.160008] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd7cffc00-0xd7cfffff] > [ 1.164021] pci 0000:00:1f.2: PME# supported from D3hot > [ 1.168006] pci 0000:00:1f.2: PME# disabled > [ 1.172048] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] > [ 1.176055] pci 0000:04:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] > [ 1.180008] pci 0000:04:00.0: reg 14 io port: [0xe000-0xe0ff] > [ 1.184007] pci 0000:04:00.0: reg 18 32bit mmio: [0xd7fe0000-0xd7feffff] > [ 1.188017] pci 0000:04:00.0: reg 30 32bit mmio: [0xd7fc0000-0xd7fdffff] > [ 1.192021] pci 0000:04:00.0: supports D1 D2 > [ 1.196032] pci 0000:04:00.1: reg 10 32bit mmio: [0xd7ff0000-0xd7ffffff] > [ 1.200039] pci 0000:04:00.1: supports D1 D2 > [ 1.204042] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] > [ 1.208005] pci 0000:00:01.0: bridge 32bit mmio: [0xd7f00000-0xd7ffffff] > [ 1.212006] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff] > [ 1.216041] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] > [ 1.220069] pci 0000:02:00.0: reg 10 64bit mmio: [0xd7efc000-0xd7efffff] > [ 1.224010] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff] > [ 1.228027] pci 0000:02:00.0: reg 30 32bit mmio: [0xd7ec0000-0xd7edffff] > [ 1.232042] pci 0000:02:00.0: supports D1 D2 > [ 1.236004] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 1.240007] pci 0000:02:00.0: PME# disabled > [ 1.244041] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff] > [ 1.248006] pci 0000:00:1c.3: bridge 32bit mmio: [0xd7e00000-0xd7efffff] > [ 1.252045] pci 0000:01:01.0: reg 10 32bit mmio: [0xd7ddf000-0xd7ddffff] > [ 1.256009] pci 0000:01:01.0: reg 14 32bit mmio: [0xd7dde000-0xd7ddefff] > [ 1.260041] pci 0000:01:01.0: supports D1 > [ 1.264038] pci 0000:01:03.0: reg 10 io port: [0xb800-0xb807] > [ 1.268009] pci 0000:01:03.0: reg 14 io port: [0xb400-0xb403] > [ 1.272008] pci 0000:01:03.0: reg 18 io port: [0xb000-0xb007] > [ 1.276008] pci 0000:01:03.0: reg 1c io port: [0xa800-0xa803] > [ 1.280008] pci 0000:01:03.0: reg 20 io port: [0xa400-0xa40f] > [ 1.284013] pci 0000:01:03.0: reg 30 32bit mmio: [0xd7de0000-0xd7dfffff] > [ 1.288057] pci 0000:00:1e.0: transparent bridge > [ 1.292006] pci 0000:00:1e.0: bridge io port: [0xa000-0xbfff] > [ 1.296006] pci 0000:00:1e.0: bridge 32bit mmio: [0xd7d00000-0xd7dfffff] > [ 1.300022] pci_bus 0000:00: on NUMA node 0 > [ 1.304021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 1.312655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > [ 1.316282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] > [ 1.320615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > [ 1.324296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] > [ 1.348142] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 304688 usecs > [ 1.352007] calling acpi_pci_link_init+0x0/0x63 @ 1 > [ 1.356458] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) > [ 1.364748] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) > [ 1.372746] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) > [ 1.380746] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) > [ 1.388747] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) > [ 1.396745] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) > [ 1.404744] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > [ 1.414061] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) > [ 1.421875] initcall acpi_pci_link_init+0x0/0x63 returned 0 after 62500 usecs > [ 1.424006] calling acpi_power_init+0x0/0x77 @ 1 > [ 1.428380] initcall acpi_power_init+0x0/0x77 returned 0 after 0 usecs > [ 1.432005] Clocksource tsc unstable (delta = 160815809 ns) > [ 1.436046] calling acpi_system_init+0x0/0x274 @ 1 > [ 1.440121] ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 5F, should be 52 [20081204] > [ 1.449220] initcall acpi_system_init+0x0/0x274 returned 0 after 7812 usecs > [ 1.452006] calling acpi_debug_init+0x0/0xae @ 1 > [ 1.456014] initcall acpi_debug_init+0x0/0xae returned 0 after 0 usecs > [ 1.460006] calling pnp_init+0x0/0x12 @ 1 > [ 1.464097] initcall pnp_init+0x0/0x12 returned 0 after 0 usecs > [ 1.468007] calling setup_shutdown_event+0x0/0x21 @ 1 > [ 1.472033] initcall setup_shutdown_event+0x0/0x21 returned 0 after 0 usecs > [ 1.476006] calling misc_init+0x0/0xa4 @ 1 > [ 1.480102] initcall misc_init+0x0/0xa4 returned 0 after 0 usecs > [ 1.484007] calling tps_init+0x0/0xc7 @ 1 > [ 1.488029] tps65010: version 2 May 2005 > [ 1.492087] i2c-core: driver [tps65010] registered > [ 1.496092] i2c-core: driver [tps65010] unregistered > [ 1.516102] i2c-core: driver [tps65010] registered > [ 1.520088] i2c-core: driver [tps65010] unregistered > [ 1.540097] i2c-core: driver [tps65010] registered > [ 1.544088] i2c-core: driver [tps65010] unregistered > [ 1.548009] tps65010: no chip? > [ 1.552007] initcall tps_init+0x0/0xc7 returned -19 after 62500 usecs > [ 1.556006] calling twl4030_init+0x0/0x14 @ 1 > [ 1.560084] i2c-core: driver [twl4030] registered > [ 1.564007] initcall twl4030_init+0x0/0x14 returned 0 after 3906 usecs > [ 1.568019] calling phy_init+0x0/0x3a @ 1 > [ 1.572255] initcall phy_init+0x0/0x3a returned 0 after 0 usecs > [ 1.576006] calling init_scsi+0x0/0xa1 @ 1 > [ 1.580500] SCSI subsystem initialized > [ 1.584007] initcall init_scsi+0x0/0xa1 returned 0 after 3906 usecs > [ 1.588038] calling ata_init+0x0/0x3fd @ 1 > [ 1.592061] libata version 3.00 loaded. > [ 1.596007] initcall ata_init+0x0/0x3fd returned 0 after 3906 usecs > [ 1.600041] calling usb_init+0x0/0x168 @ 1 > [ 1.604297] usbcore: registered new interface driver usbfs > [ 1.608111] usbcore: registered new interface driver hub > [ 1.612136] usbcore: registered new device driver usb > [ 1.616007] initcall usb_init+0x0/0x168 returned 0 after 11718 usecs > [ 1.620048] calling serio_init+0x0/0xa0 @ 1 > [ 1.624114] initcall serio_init+0x0/0xa0 returned 0 after 0 usecs > [ 1.628007] calling gameport_init+0x0/0xa0 @ 1 > [ 1.632140] initcall gameport_init+0x0/0xa0 returned 0 after 0 usecs > [ 1.636007] calling input_init+0x0/0x119 @ 1 > [ 1.640117] initcall input_init+0x0/0x119 returned 0 after 0 usecs > [ 1.644007] calling rtc_init+0x0/0x65 @ 1 > [ 1.648099] initcall rtc_init+0x0/0x65 returned 0 after 0 usecs > [ 1.652006] calling hwmon_init+0x0/0x44 @ 1 > [ 1.656098] initcall hwmon_init+0x0/0x44 returned 0 after 0 usecs > [ 1.660006] calling thermal_init+0x0/0x43 @ 1 > [ 1.664097] initcall thermal_init+0x0/0x43 returned 0 after 0 usecs > [ 1.668006] calling leds_init+0x0/0x40 @ 1 > [ 1.672098] initcall leds_init+0x0/0x40 returned 0 after 0 usecs > [ 1.676007] calling acpi_wmi_init+0x0/0x55 @ 1 > [ 1.680108] ACPI: WMI: Mapper loaded > [ 1.684007] initcall acpi_wmi_init+0x0/0x55 returned 0 after 3906 usecs > [ 1.688019] calling ac97_bus_init+0x0/0x12 @ 1 > [ 1.692094] initcall ac97_bus_init+0x0/0x12 returned 0 after 0 usecs > [ 1.696006] calling pci_subsys_init+0x0/0x130 @ 1 > [ 1.700018] PCI: Using ACPI for IRQ routing > [ 1.704122] initcall pci_subsys_init+0x0/0x130 returned 0 after 3906 usecs > [ 1.708006] calling proto_init+0x0/0x12 @ 1 > [ 1.712013] initcall proto_init+0x0/0x12 returned 0 after 0 usecs > [ 1.716006] calling net_dev_init+0x0/0x141 @ 1 > [ 1.720277] initcall net_dev_init+0x0/0x141 returned 0 after 0 usecs > [ 1.724007] calling neigh_init+0x0/0x71 @ 1 > [ 1.728020] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs > [ 1.732007] calling fib_rules_init+0x0/0xb0 @ 1 > [ 1.736008] initcall fib_rules_init+0x0/0xb0 returned 0 after 0 usecs > [ 1.740006] calling pktsched_init+0x0/0xc4 @ 1 > [ 1.744012] initcall pktsched_init+0x0/0xc4 returned 0 after 0 usecs > [ 1.748007] calling tc_filter_init+0x0/0x4c @ 1 > [ 1.752006] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs > [ 1.756006] calling genl_init+0x0/0xe1 @ 1 > [ 1.776031] initcall genl_init+0x0/0xe1 returned 0 after 15625 usecs > [ 1.780007] calling cipso_v4_init+0x0/0x5b @ 1 > [ 1.784022] initcall cipso_v4_init+0x0/0x5b returned 0 after 0 usecs > [ 1.788007] calling wanrouter_init+0x0/0x5a @ 1 > [ 1.792006] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. > [ 1.796017] initcall wanrouter_init+0x0/0x5a returned 0 after 3906 usecs > [ 1.800006] calling wireless_nlevent_init+0x0/0x27 @ 1 > [ 1.804007] initcall wireless_nlevent_init+0x0/0x27 returned 0 after 0 usecs > [ 1.808006] calling netlbl_init+0x0/0x8a @ 1 > [ 1.812005] NetLabel: Initializing > [ 1.816005] NetLabel: domain hash size = 128 > [ 1.820005] NetLabel: protocols = UNLABELED CIPSOv4 > [ 1.824079] NetLabel: unlabeled traffic allowed by default > [ 1.828007] initcall netlbl_init+0x0/0x8a returned 0 after 15625 usecs > [ 1.832007] calling rfkill_init+0x0/0x69 @ 1 > [ 1.836094] initcall rfkill_init+0x0/0x69 returned 0 after 0 usecs > [ 1.840007] calling sysctl_init+0x0/0x51 @ 1 > [ 1.844008] initcall sysctl_init+0x0/0x51 returned 0 after 0 usecs > [ 1.848009] calling xen_mc_debugfs+0x0/0x11a @ 1 > [ 1.852040] initcall xen_mc_debugfs+0x0/0x11a returned 0 after 0 usecs > [ 1.856007] calling xen_mmu_debugfs+0x0/0x2c0 @ 1 > [ 1.860049] initcall xen_mmu_debugfs+0x0/0x2c0 returned 0 after 0 usecs > [ 1.864007] calling pci_iommu_init+0x0/0x18 @ 1 > [ 1.868040] initcall pci_iommu_init+0x0/0x18 returned 0 after 0 usecs > [ 1.872007] calling print_all_ICs+0x0/0x53a @ 1 > [ 1.876006] > [ 1.876006] printing PIC contents > [ 1.880007] ... PIC IMR: ffff > [ 1.883106] ... PIC IRR: 0c29 > [ 1.884005] ... PIC ISR: 0000 > [ 1.888007] ... PIC ELCR: 0e28 > [ 1.891105] > [ 1.891106] printing local APIC contents on CPU#0/0: > [ 1.892004] ... APIC ID: 00000000 (0) > [ 1.892004] ... APIC VERSION: 00050014 > [ 1.892004] ... APIC TASKPRI: 00000000 (00) > [ 1.892004] ... APIC PROCPRI: 00000000 > [ 1.892004] ... APIC LDR: 01000000 > [ 1.892004] ... APIC DFR: ffffffff > [ 1.892004] ... APIC SPIV: 000001ff > [ 1.892004] ... APIC ISR field: > [ 1.892004] 0123456789abcdef0123456789abcdef > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] ... APIC TMR field: > [ 1.892004] 0123456789abcdef0123456789abcdef > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] ... APIC IRR field: > [ 1.892004] 0123456789abcdef0123456789abcdef > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000000000000000000000 > [ 1.892004] 00000000000000010000000000000000 > [ 1.892004] ... APIC ESR: 00000000 > [ 1.892004] ... APIC ICR: 000c0630 > [ 1.892004] ... APIC ICR2: ff000000 > [ 1.892004] ... APIC LVTT: 000200ef > [ 1.892004] ... APIC LVTPC: 00010000 > [ 1.892004] ... APIC LVT0: 00010700 > [ 1.892004] ... APIC LVT1: 00000400 > [ 1.892004] ... APIC LVTERR: 000000fe > [ 1.892004] ... APIC TMICT: 0000e110 > [ 1.892004] ... APIC TMCCT: 0000d9a0 > [ 1.892004] ... APIC TDCR: 00000003 > [ 1.892004] > [ 1.892005] number of MP IRQ sources: 15. > [ 1.896005] number of IO-APIC #2 registers: 24. > [ 1.900005] testing the IO APIC....................... > [ 1.904010] > [ 1.908005] IO APIC #2...... > [ 1.910931] .... register #00: 02000000 > [ 1.912005] ....... : physical APIC id: 02 > [ 1.916005] ....... : Delivery Type: 0 > [ 1.920005] ....... : LTS : 0 > [ 1.924005] .... register #01: 00170020 > [ 1.928005] ....... : max redirection entries: 0017 > [ 1.932005] ....... : PRQ implemented: 0 > [ 1.936005] ....... : IO APIC version: 0020 > [ 1.940005] .... IRQ redirection table: > [ 1.944005] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > [ 1.948008] 00 000 1 0 0 0 0 0 0 00 > [ 1.956008] 01 001 0 0 0 0 0 1 1 31 > [ 1.960008] 02 001 0 0 0 0 0 1 1 30 > [ 1.964008] 03 001 0 0 0 0 0 1 1 33 > [ 1.972008] 04 001 0 0 0 0 0 1 1 34 > [ 1.976008] 05 001 0 0 0 0 0 1 1 35 > [ 1.980008] 06 001 0 0 0 0 0 1 1 36 > [ 1.988008] 07 001 0 0 0 0 0 1 1 37 > [ 1.992008] 08 001 0 0 0 0 0 1 1 38 > [ 1.996008] 09 001 0 1 0 0 0 1 1 39 > [ 2.004008] 0a 001 0 0 0 0 0 1 1 3A > [ 2.008008] 0b 001 0 0 0 0 0 1 1 3B > [ 2.012008] 0c 001 0 0 0 0 0 1 1 3C > [ 2.020008] 0d 001 0 0 0 0 0 1 1 3D > [ 2.024008] 0e 001 0 0 0 0 0 1 1 3E > [ 2.028008] 0f 001 0 0 0 0 0 1 1 3F > [ 2.036008] 10 000 1 0 0 0 0 0 0 00 > [ 2.040008] 11 000 1 0 0 0 0 0 0 00 > [ 2.044008] 12 000 1 0 0 0 0 0 0 00 > [ 2.052008] 13 000 1 0 0 0 0 0 0 00 > [ 2.056008] 14 000 1 0 0 0 0 0 0 00 > [ 2.060008] 15 000 1 0 0 0 0 0 0 00 > [ 2.068008] 16 000 1 0 0 0 0 0 0 00 > [ 2.072008] 17 000 1 0 0 0 0 0 0 00 > [ 2.076006] IRQ to pin mappings: > [ 2.080006] IRQ0 -> 0:2 > [ 2.084238] IRQ1 -> 0:1 > [ 2.086818] IRQ3 -> 0:3 > [ 2.088809] IRQ4 -> 0:4 > [ 2.092237] IRQ5 -> 0:5 > [ 2.094817] IRQ6 -> 0:6 > [ 2.096800] IRQ7 -> 0:7 > [ 2.100237] IRQ8 -> 0:8 > [ 2.102809] IRQ9 -> 0:9 > [ 2.104809] IRQ10 -> 0:10 > [ 2.108006] IRQ11 -> 0:11 > [ 2.110758] IRQ12 -> 0:12 > [ 2.112896] IRQ13 -> 0:13 > [ 2.116238] IRQ14 -> 0:14 > [ 2.118984] IRQ15 -> 0:15 > [ 2.120913] .................................... done. > [ 2.124007] initcall print_all_ICs+0x0/0x53a returned 0 after 242187 usecs > [ 2.128007] calling hpet_late_init+0x0/0xf1 @ 1 > [ 2.132080] hpet clockevent registered > [ 2.136015] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 2.141069] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > [ 2.145009] initcall hpet_late_init+0x0/0xf1 returned 0 after 11718 usecs > [ 2.148008] calling clocksource_done_booting+0x0/0x12 @ 1 > [ 2.152007] initcall clocksource_done_booting+0x0/0x12 returned 0 after 0 usecs > [ 2.156012] Switched to high resolution mode on CPU 0 > [ 2.161115] calling rb_init_debugfs+0x0/0x50 @ 1 > [ 2.165879] initcall rb_init_debugfs+0x0/0x50 returned 0 after 6 usecs > [ 2.172459] calling tracer_init_debugfs+0x0/0x34e @ 1 > [ 2.177687] initcall tracer_init_debugfs+0x0/0x34e returned 0 after 35 usecs > [ 2.184784] calling init_pipe_fs+0x0/0x51 @ 1 > [ 2.189299] initcall init_pipe_fs+0x0/0x51 returned 0 after 17 usecs > [ 2.195703] calling init_mnt_writers+0x0/0x13 @ 1 > [ 2.200549] initcall init_mnt_writers+0x0/0x13 returned 0 after 0 usecs > [ 2.207212] calling anon_inode_init+0x0/0x12e @ 1 > [ 2.212082] initcall anon_inode_init+0x0/0x12e returned 0 after 23 usecs > [ 2.218834] calling acpi_event_init+0x0/0x52 @ 1 > [ 2.236030] initcall acpi_event_init+0x0/0x52 returned 0 after 12145 usecs > [ 2.242954] calling pnpacpi_init+0x0/0x8e @ 1 > [ 2.247454] pnp: PnP ACPI init > [ 2.250575] ACPI: bus type pnp registered > [ 2.255677] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) > [ 2.263351] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) > [ 2.273858] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) > [ 2.285019] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) > [ 2.301155] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) > [ 2.311673] pnp: PnP ACPI: found 14 devices > [ 2.315909] ACPI: ACPI bus type pnp unregistered > [ 2.320646] initcall pnpacpi_init+0x0/0x8e returned 0 after 71474 usecs > [ 2.327306] calling pnp_system_init+0x0/0x13 @ 1 > [ 2.332078] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved > [ 2.339274] system 00:08: ioport range 0x290-0x297 has been reserved > [ 2.345685] system 00:09: ioport range 0x4d0-0x4d1 has been reserved > [ 2.352085] system 00:09: ioport range 0x800-0x87f has been reserved > [ 2.358488] system 00:09: ioport range 0x480-0x4bf has been reserved > [ 2.364893] system 00:09: ioport range 0x900-0x91f has been reserved > [ 2.371299] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved > [ 2.378484] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved > [ 2.385670] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved > [ 2.393216] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved > [ 2.400406] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved > [ 2.407595] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved > [ 2.414783] system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved > [ 2.421970] system 00:0d: iomem range 0x0-0x9ffff could not be reserved > [ 2.428637] system 00:0d: iomem range 0xc0000-0xdffff has been reserved > [ 2.435303] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved > [ 2.442315] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved > [ 2.449774] initcall pnp_system_init+0x0/0x13 returned 0 after 114949 usecs > [ 2.456787] calling chr_dev_init+0x0/0xa3 @ 1 > [ 2.462289] initcall chr_dev_init+0x0/0xa3 returned 0 after 939 usecs > [ 2.468782] calling firmware_class_init+0x0/0x7f @ 1 > [ 2.473984] initcall firmware_class_init+0x0/0x7f returned 0 after 79 usecs > [ 2.480993] calling cpufreq_gov_performance_init+0x0/0x12 @ 1 > [ 2.487008] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs > [ 2.494729] calling pcibios_assign_resources+0x0/0x8a @ 1 > [ 2.500316] pci 0000:00:01.0: PCI bridge, secondary bus 0000:04 > [ 2.506281] pci 0000:00:01.0: IO window: 0xe000-0xefff > [ 2.511647] pci 0000:00:01.0: MEM window: 0xd7f00000-0xd7ffffff > [ 2.517792] pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff > [ 2.525428] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 > [ 2.531398] pci 0000:00:1c.0: IO window: 0xd000-0xdfff > [ 2.536763] pci 0000:00:1c.0: MEM window: disabled > [ 2.541780] pci 0000:00:1c.0: PREFETCH window: disabled > [ 2.547234] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02 > [ 2.553202] pci 0000:00:1c.3: IO window: 0xc000-0xcfff > [ 2.558569] pci 0000:00:1c.3: MEM window: 0xd7e00000-0xd7efffff > [ 2.564712] pci 0000:00:1c.3: PREFETCH window: disabled > [ 2.570169] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 > [ 2.576134] pci 0000:00:1e.0: IO window: 0xa000-0xbfff > [ 2.581500] pci 0000:00:1e.0: MEM window: 0xd7d00000-0xd7dfffff > [ 2.587645] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x000000880fffff > [ 2.595289] alloc irq_desc for 16 on cpu 0 node 0 > [ 2.599275] alloc kstat_irqs on cpu 0 node 0 > [ 2.604711] IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) > [ 2.612258] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 2.619011] pci 0000:00:01.0: setting latency timer to 64 > [ 2.624465] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 2.631212] pci 0000:00:1c.0: setting latency timer to 64 > [ 2.636667] alloc irq_desc for 19 on cpu 0 node 0 > [ 2.640659] alloc kstat_irqs on cpu 0 node 0 > [ 2.646084] IOAPIC[0]: Set routing entry (2-19 -> 0x51 -> IRQ 19 Mode:1 Active:1) > [ 2.653632] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > [ 2.660384] pci 0000:00:1c.3: setting latency timer to 64 > [ 2.665838] pci 0000:00:1e.0: setting latency timer to 64 > [ 2.671288] pci_bus 0000:00: resource 0 io: [0x00-0xffff] > [ 2.676823] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] > [ 2.683748] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] > [ 2.689458] pci_bus 0000:04: resource 1 mem: [0xd7f00000-0xd7ffffff] > [ 2.695863] pci_bus 0000:04: resource 2 mem: [0xd8000000-0xdfffffff] > [ 2.702267] pci_bus 0000:04: resource 3 mem: [0x0-0x0] > [ 2.707451] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] > [ 2.713162] pci_bus 0000:03: resource 1 mem: [0x0-0x0] > [ 2.718344] pci_bus 0000:03: resource 2 mem: [0x0-0x0] > [ 2.723882] pci_bus 0000:03: resource 3 mem: [0x0-0x0] > [ 2.729066] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] > [ 2.734776] pci_bus 0000:02: resource 1 mem: [0xd7e00000-0xd7efffff] > [ 2.741181] pci_bus 0000:02: resource 2 mem: [0x0-0x0] > [ 2.746363] pci_bus 0000:02: resource 3 mem: [0x0-0x0] > [ 2.751547] pci_bus 0000:01: resource 0 io: [0xa000-0xbfff] > [ 2.757258] pci_bus 0000:01: resource 1 mem: [0xd7d00000-0xd7dfffff] > [ 2.763662] pci_bus 0000:01: resource 2 mem: [0x88000000-0x880fffff] > [ 2.770067] pci_bus 0000:01: resource 3 io: [0x00-0xffff] > [ 2.775597] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] > [ 2.782524] initcall pcibios_assign_resources+0x0/0x8a returned 0 after 275640 usecs > [ 2.790332] calling sysctl_core_init+0x0/0x38 @ 1 > [ 2.795186] initcall sysctl_core_init+0x0/0x38 returned 0 after 9 usecs > [ 2.801849] calling inet_init+0x0/0x25a @ 1 > [ 2.806196] NET: Registered protocol family 2 > [ 2.856066] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > [ 2.863781] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > [ 2.874517] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > [ 2.881648] TCP: Hash tables configured (established 262144 bind 65536) > [ 2.888309] TCP reno registered > [ 2.900162] initcall inet_init+0x0/0x25a returned 0 after 91775 usecs > [ 2.906657] calling af_unix_init+0x0/0x65 @ 1 > [ 2.911173] NET: Registered protocol family 1 > [ 2.915592] initcall af_unix_init+0x0/0x65 returned 0 after 4334 usecs > [ 2.922173] calling populate_rootfs+0x0/0xfb @ 1 > [ 2.927401] initcall populate_rootfs+0x0/0xfb returned 0 after 462 usecs > [ 2.934158] calling calgary_fixup_tce_spaces+0x0/0xf8 @ 1 > [ 2.939695] initcall calgary_fixup_tce_spaces+0x0/0xf8 returned -19 after 0 usecs > [ 2.947241] calling i8259A_init_sysfs+0x0/0x29 @ 1 > [ 2.952437] initcall i8259A_init_sysfs+0x0/0x29 returned 0 after 257 usecs > [ 2.959358] calling vsyscall_init+0x0/0xa3 @ 1 > [ 2.963950] initcall vsyscall_init+0x0/0xa3 returned 0 after 3 usecs > [ 2.970355] calling sbf_init+0x0/0x103 @ 1 > [ 2.974595] initcall sbf_init+0x0/0x103 returned 0 after 0 usecs > [ 2.980652] calling i8237A_init_sysfs+0x0/0x29 @ 1 > [ 2.985754] initcall i8237A_init_sysfs+0x0/0x29 returned 0 after 166 usecs > [ 2.992682] calling add_rtc_cmos+0x0/0xce @ 1 > [ 2.997210] initcall add_rtc_cmos+0x0/0xce returned 0 after 5 usecs > [ 3.003526] calling cache_sysfs_init+0x0/0x221 @ 1 > [ 3.008724] initcall cache_sysfs_init+0x0/0x221 returned 0 after 262 usecs > [ 3.015649] calling mce_init_device+0x0/0x120 @ 1 > [ 3.020814] initcall mce_init_device+0x0/0x120 returned 0 after 293 usecs > [ 3.027652] calling periodic_mcheck_init+0x0/0x41 @ 1 > [ 3.032909] initcall periodic_mcheck_init+0x0/0x41 returned 0 after 2 usecs > [ 3.039923] calling thermal_throttle_init_device+0x0/0x44 @ 1 > [ 3.045812] initcall thermal_throttle_init_device+0x0/0x44 returned 0 after 4 usecs > [ 3.053538] calling threshold_init_device+0x0/0x57 @ 1 > [ 3.058817] initcall threshold_init_device+0x0/0x57 returned 0 after 0 usecs > [ 3.065915] calling init_lapic_sysfs+0x0/0x2f @ 1 > [ 3.070921] initcall init_lapic_sysfs+0x0/0x2f returned 0 after 157 usecs > [ 3.077763] calling ioapic_init_sysfs+0x0/0xd0 @ 1 > [ 3.082891] initcall ioapic_init_sysfs+0x0/0xd0 returned 0 after 158 usecs > [ 3.089821] calling start_periodic_check_for_corruption+0x0/0x40 @ 1 > [ 3.096336] Scanning for low memory corruption every 60 seconds > [ 3.102309] initcall start_periodic_check_for_corruption+0x0/0x40 returned 0 after 5831 usecs > [ 3.110903] calling uv_ptc_init+0x0/0x51 @ 1 > [ 3.115316] initcall uv_ptc_init+0x0/0x51 returned 0 after 1 usecs > [ 3.121545] calling uv_bau_init+0x0/0x410 @ 1 > [ 3.126045] initcall uv_bau_init+0x0/0x410 returned 0 after 1 usecs > [ 3.132361] calling sgi_uv_sysfs_init+0x0/0xaf @ 1 > [ 3.137302] initcall sgi_uv_sysfs_init+0x0/0xaf returned 0 after 7 usecs > [ 3.144053] calling aes_init+0x0/0x20 @ 1 > [ 3.148296] initcall aes_init+0x0/0x20 returned 0 after 87 usecs > [ 3.154349] calling crc32c_intel_mod_init+0x0/0x30 @ 1 > [ 3.159659] initcall crc32c_intel_mod_init+0x0/0x30 returned -19 after 0 usecs > [ 3.166950] calling init_vdso_vars+0x0/0x241 @ 1 > [ 3.171732] initcall init_vdso_vars+0x0/0x241 returned 0 after 21 usecs > [ 3.178399] calling ia32_binfmt_init+0x0/0x14 @ 1 > [ 3.183247] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 2 usecs > [ 3.189908] calling sysenter_setup+0x0/0x377 @ 1 > [ 3.194674] initcall sysenter_setup+0x0/0x377 returned 0 after 6 usecs > [ 3.201253] calling init_aout_binfmt+0x0/0x1b @ 1 > [ 3.206098] initcall init_aout_binfmt+0x0/0x1b returned 0 after 1 usecs > [ 3.212761] calling init_sched_debug_procfs+0x0/0x2c @ 1 > [ 3.218223] initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 8 usecs > [ 3.225511] calling proc_schedstat_init+0x0/0x22 @ 1 > [ 3.230621] initcall proc_schedstat_init+0x0/0x22 returned 0 after 4 usecs > [ 3.237548] calling proc_execdomains_init+0x0/0x2f @ 1 > [ 3.242832] initcall proc_execdomains_init+0x0/0x2f returned 0 after 4 usecs > [ 3.249926] calling ioresources_init+0x0/0x3c @ 1 > [ 3.254777] initcall ioresources_init+0x0/0x3c returned 0 after 7 usecs > [ 3.261442] calling uid_cache_init+0x0/0x85 @ 1 > [ 3.266119] initcall uid_cache_init+0x0/0x85 returned 0 after 5 usecs > [ 3.272606] calling init_posix_timers+0x0/0xe8 @ 1 > [ 3.277542] initcall init_posix_timers+0x0/0xe8 returned 0 after 5 usecs > [ 3.284288] calling init_posix_cpu_timers+0x0/0xb3 @ 1 > [ 3.289567] initcall init_posix_cpu_timers+0x0/0xb3 returned 0 after 0 usecs > [ 3.296664] calling nsproxy_cache_init+0x0/0x38 @ 1 > [ 3.301686] initcall nsproxy_cache_init+0x0/0x38 returned 0 after 3 usecs > [ 3.308520] calling timekeeping_init_device+0x0/0x29 @ 1 > [ 3.314133] initcall timekeeping_init_device+0x0/0x29 returned 0 after 157 usecs > [ 3.321598] calling init_clocksource_sysfs+0x0/0x52 @ 1 > [ 3.327138] initcall init_clocksource_sysfs+0x0/0x52 returned 0 after 157 usecs > [ 3.334512] calling init_timer_list_procfs+0x0/0x2c @ 1 > [ 3.339910] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 4 usecs > [ 3.347096] calling futex_init+0x0/0xa5 @ 1 > [ 3.351429] initcall futex_init+0x0/0xa5 returned 0 after 7 usecs > [ 3.357573] calling proc_dma_init+0x0/0x22 @ 1 > [ 3.362168] initcall proc_dma_init+0x0/0x22 returned 0 after 8 usecs > [ 3.368572] calling proc_modules_init+0x0/0x22 @ 1 > [ 3.373508] initcall proc_modules_init+0x0/0x22 returned 0 after 4 usecs > [ 3.380254] calling kallsyms_init+0x0/0x25 @ 1 > [ 3.384845] initcall kallsyms_init+0x0/0x25 returned 0 after 4 usecs > [ 3.391252] calling crash_save_vmcoreinfo_init+0x0/0x4a0 @ 1 > [ 3.397067] initcall crash_save_vmcoreinfo_init+0x0/0x4a0 returned 0 after 15 usecs > [ 3.404790] calling crash_notes_memory_init+0x0/0x3c @ 1 > [ 3.410244] initcall crash_notes_memory_init+0x0/0x3c returned 0 after 1 usecs > [ 3.417530] calling init_kprobes+0x0/0x16c @ 1 > [ 3.430556] initcall init_kprobes+0x0/0x16c returned 0 after 8245 usecs > [ 3.437221] calling utsname_sysctl_init+0x0/0x14 @ 1 > [ 3.442329] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 3 usecs > [ 3.449252] calling init_tracepoints+0x0/0x20 @ 1 > [ 3.454096] initcall init_tracepoints+0x0/0x20 returned 0 after 0 usecs > [ 3.460759] calling init_lstats_procfs+0x0/0x34 @ 1 > [ 3.465782] initcall init_lstats_procfs+0x0/0x34 returned 0 after 4 usecs > [ 3.472615] calling init_stack_trace+0x0/0x1b @ 1 > [ 3.477462] initcall init_stack_trace+0x0/0x1b returned 0 after 1 usecs > [ 3.484125] calling init_per_zone_pages_min+0x0/0x96 @ 1 > [ 3.489808] initcall init_per_zone_pages_min+0x0/0x96 returned 0 after 225 usecs > [ 3.497275] calling pdflush_init+0x0/0x12 @ 1 > [ 3.501832] initcall pdflush_init+0x0/0x12 returned 0 after 59 usecs > [ 3.508236] calling kswapd_init+0x0/0x14 @ 1 > [ 3.512698] initcall kswapd_init+0x0/0x14 returned 0 after 23 usecs > [ 3.519017] calling init_tmpfs+0x0/0xd8 @ 1 > [ 3.523388] initcall init_tmpfs+0x0/0xd8 returned 0 after 38 usecs > [ 3.529616] calling setup_vmstat+0x0/0x7c @ 1 > [ 3.534129] initcall setup_vmstat+0x0/0x7c returned 0 after 14 usecs > [ 3.540536] calling mm_sysfs_init+0x0/0x29 @ 1 > [ 3.545130] initcall mm_sysfs_init+0x0/0x29 returned 0 after 8 usecs > [ 3.551534] calling proc_vmalloc_init+0x0/0x25 @ 1 > [ 3.556472] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 5 usecs > [ 3.563225] calling procswaps_init+0x0/0x24 @ 1 > [ 3.567902] initcall procswaps_init+0x0/0x24 returned 0 after 4 usecs > [ 3.574397] calling hugetlb_init+0x0/0x478 @ 1 > [ 3.578982] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 3.585400] initcall hugetlb_init+0x0/0x478 returned 0 after 6267 usecs > [ 3.592059] calling slab_proc_init+0x0/0x25 @ 1 > [ 3.596735] initcall slab_proc_init+0x0/0x25 returned 0 after 4 usecs > [ 3.603222] calling slab_sysfs_init+0x0/0xf8 @ 1 > [ 3.619507] initcall slab_sysfs_init+0x0/0xf8 returned 0 after 11251 usecs > [ 3.626443] calling fasync_init+0x0/0x31 @ 1 > [ 3.632626] initcall fasync_init+0x0/0x31 returned 0 after 1459 usecs > [ 3.639120] calling proc_filesystems_init+0x0/0x22 @ 1 > [ 3.644441] initcall proc_filesystems_init+0x0/0x22 returned 0 after 11 usecs > [ 3.651626] calling dnotify_init+0x0/0x2a @ 1 > [ 3.656261] initcall dnotify_init+0x0/0x2a returned 0 after 133 usecs > [ 3.662754] calling aio_setup+0x0/0xb4 @ 1 > [ 3.667539] initcall aio_setup+0x0/0xb4 returned 0 after 424 usecs > [ 3.673770] calling proc_locks_init+0x0/0x22 @ 1 > [ 3.678590] initcall proc_locks_init+0x0/0x22 returned 0 after 5 usecs > [ 3.685166] calling init_sys32_ioctl+0x0/0x88 @ 1 > [ 3.690030] initcall init_sys32_ioctl+0x0/0x88 returned 0 after 19 usecs > [ 3.696779] calling init_mbcache+0x0/0x14 @ 1 > [ 3.701279] initcall init_mbcache+0x0/0x14 returned 0 after 1 usecs > [ 3.707595] calling dquot_init+0x0/0xf3 @ 1 > [ 3.711918] VFS: Disk quotas dquot_6.5.2 > [ 3.716039] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 3.722600] initcall dquot_init+0x0/0xf3 returned 0 after 10429 usecs > [ 3.729088] calling init_v1_quota_format+0x0/0x12 @ 1 > [ 3.734280] initcall init_v1_quota_format+0x0/0x12 returned 0 after 0 usecs > [ 3.741290] calling init_v2_quota_format+0x0/0x14 @ 1 > [ 3.746483] initcall init_v2_quota_format+0x0/0x14 returned 0 after 0 usecs > [ 3.753493] calling proc_cmdline_init+0x0/0x22 @ 1 > [ 3.758431] initcall proc_cmdline_init+0x0/0x22 returned 0 after 5 usecs > [ 3.765184] calling proc_cpuinfo_init+0x0/0x22 @ 1 > [ 3.770122] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 5 usecs > [ 3.776876] calling proc_devices_init+0x0/0x22 @ 1 > [ 3.781815] initcall proc_devices_init+0x0/0x22 returned 0 after 6 usecs > [ 3.788914] calling proc_interrupts_init+0x0/0x22 @ 1 > [ 3.794110] initcall proc_interrupts_init+0x0/0x22 returned 0 after 4 usecs > [ 3.801126] calling proc_loadavg_init+0x0/0x22 @ 1 > [ 3.806062] initcall proc_loadavg_init+0x0/0x22 returned 0 after 4 usecs > [ 3.812816] calling proc_meminfo_init+0x0/0x22 @ 1 > [ 3.817753] initcall proc_meminfo_init+0x0/0x22 returned 0 after 4 usecs > [ 3.824508] calling proc_stat_init+0x0/0x22 @ 1 > [ 3.829185] initcall proc_stat_init+0x0/0x22 returned 0 after 4 usecs > [ 3.835679] calling proc_uptime_init+0x0/0x2d @ 1 > [ 3.840530] initcall proc_uptime_init+0x0/0x2d returned 0 after 4 usecs > [ 3.847198] calling proc_version_init+0x0/0x22 @ 1 > [ 3.852135] initcall proc_version_init+0x0/0x22 returned 0 after 4 usecs > [ 3.858889] calling proc_kmsg_init+0x0/0x25 @ 1 > [ 3.863565] initcall proc_kmsg_init+0x0/0x25 returned 0 after 4 usecs > [ 3.870060] calling proc_page_init+0x0/0x42 @ 1 > [ 3.874741] initcall proc_page_init+0x0/0x42 returned 0 after 7 usecs > [ 3.881232] calling configfs_init+0x0/0xd6 @ 1 > [ 3.885958] initcall configfs_init+0x0/0xd6 returned 0 after 137 usecs > [ 3.892533] calling init_devpts_fs+0x0/0x49 @ 1 > [ 3.897236] Created ptmx node in devpts ino 2 > [ 3.901643] initcall init_devpts_fs+0x0/0x49 returned 0 after 4330 usecs > [ 3.908393] calling init_dlm+0x0/0xa3 @ 1 > [ 3.913033] DLM (built Feb 8 2009 06:53:43) installed > [ 3.918222] initcall init_dlm+0x0/0xa3 returned 0 after 5544 usecs > [ 3.924480] calling init_ext3_fs+0x0/0x72 @ 1 > [ 3.929259] initcall init_ext3_fs+0x0/0x72 returned 0 after 276 usecs > [ 3.935754] calling journal_init+0x0/0xea @ 1 > [ 3.940841] initcall journal_init+0x0/0xea returned 0 after 536 usecs > [ 3.947332] calling init_ext2_fs+0x0/0x62 @ 1 > [ 3.951989] initcall init_ext2_fs+0x0/0x62 returned 0 after 132 usecs > [ 3.958478] calling init_ramfs_fs+0x0/0x12 @ 1 > [ 3.963140] initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs > [ 3.969545] calling init_hugetlbfs_fs+0x0/0xad @ 1 > [ 3.974626] initcall init_hugetlbfs_fs+0x0/0xad returned 0 after 146 usecs > [ 3.981548] calling init_minix_fs+0x0/0x62 @ 1 > [ 3.986287] initcall init_minix_fs+0x0/0x62 returned 0 after 133 usecs > [ 3.992868] calling init_iso9660_fs+0x0/0x72 @ 1 > [ 3.997803] initcall init_iso9660_fs+0x0/0x72 returned 0 after 153 usecs > [ 4.004559] calling init_hfsplus_fs+0x0/0x60 @ 1 > [ 4.009491] initcall init_hfsplus_fs+0x0/0x60 returned 0 after 156 usecs > [ 4.016242] calling init_nls_cp855+0x0/0x12 @ 1 > [ 4.020929] initcall init_nls_cp855+0x0/0x12 returned 0 after 1 usecs > [ 4.027422] calling init_nls_cp860+0x0/0x12 @ 1 > [ 4.032093] initcall init_nls_cp860+0x0/0x12 returned 0 after 0 usecs > [ 4.038583] calling init_nls_cp862+0x0/0x12 @ 1 > [ 4.043255] initcall init_nls_cp862+0x0/0x12 returned 0 after 0 usecs > [ 4.049747] calling init_nls_cp863+0x0/0x12 @ 1 > [ 4.054419] initcall init_nls_cp863+0x0/0x12 returned 0 after 0 usecs > [ 4.060909] calling init_nls_cp865+0x0/0x12 @ 1 > [ 4.065582] initcall init_nls_cp865+0x0/0x12 returned 0 after 0 usecs > [ 4.072072] calling init_nls_cp874+0x0/0x12 @ 1 > [ 4.076744] initcall init_nls_cp874+0x0/0x12 returned 0 after 0 usecs > [ 4.083234] calling init_nls_cp932+0x0/0x12 @ 1 > [ 4.087907] initcall init_nls_cp932+0x0/0x12 returned 0 after 0 usecs > [ 4.094396] calling init_nls_euc_jp+0x0/0x48 @ 1 > [ 4.099156] initcall init_nls_euc_jp+0x0/0x48 returned 0 after 0 usecs > [ 4.105733] calling init_nls_cp949+0x0/0x12 @ 1 > [ 4.110405] initcall init_nls_cp949+0x0/0x12 returned 0 after 0 usecs > [ 4.116895] calling init_nls_ascii+0x0/0x12 @ 1 > [ 4.121567] initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs > [ 4.128058] calling init_nls_iso8859_2+0x0/0x12 @ 1 > [ 4.133077] initcall init_nls_iso8859_2+0x0/0x12 returned 0 after 0 usecs > [ 4.139914] calling init_nls_iso8859_5+0x0/0x12 @ 1 > [ 4.144934] initcall init_nls_iso8859_5+0x0/0x12 returned 0 after 0 usecs > [ 4.151771] calling init_nls_cp1255+0x0/0x12 @ 1 > [ 4.156530] initcall init_nls_cp1255+0x0/0x12 returned 0 after 0 usecs > [ 4.163106] calling init_nls_iso8859_13+0x0/0x12 @ 1 > [ 4.168213] initcall init_nls_iso8859_13+0x0/0x12 returned 0 after 0 usecs > [ 4.175135] calling init_nls_utf8+0x0/0x26 @ 1 > [ 4.179722] initcall init_nls_utf8+0x0/0x26 returned 0 after 0 usecs > [ 4.186125] calling init_smb_fs+0x0/0x72 @ 1 > [ 4.190798] initcall init_smb_fs+0x0/0x72 returned 0 after 255 usecs > [ 4.197201] calling init_hpfs_fs+0x0/0x62 @ 1 > [ 4.201847] initcall init_hpfs_fs+0x0/0x62 returned 0 after 130 usecs > [ 4.208338] calling init_ufs_fs+0x0/0x62 @ 1 > [ 4.212907] initcall init_ufs_fs+0x0/0x62 returned 0 after 131 usecs > [ 4.219310] calling init_romfs_fs+0x0/0x62 @ 1 > [ 4.224043] initcall init_romfs_fs+0x0/0x62 returned 0 after 131 usecs > [ 4.230636] calling init_qnx4_fs+0x0/0x70 @ 1 > [ 4.235264] QNX4 filesystem 0.2.3 registered. > [ 4.239677] initcall init_qnx4_fs+0x0/0x70 returned 0 after 4436 usecs > [ 4.246258] calling init_adfs_fs+0x0/0x62 @ 1 > [ 4.250890] initcall init_adfs_fs+0x0/0x62 returned 0 after 134 usecs > [ 4.257382] calling init_omfs_fs+0x0/0x12 @ 1 > [ 4.261906] initcall init_omfs_fs+0x0/0x12 returned 0 after 1 usecs > [ 4.268224] calling init_jfs_fs+0x0/0x1d0 @ 1 > [ 4.272998] JFS: nTxBlock = 8192, nTxLock = 65536 > [ 4.282599] initcall init_jfs_fs+0x0/0x1d0 returned 0 after 9636 usecs > [ 4.289205] calling init_xfs_fs+0x0/0xce @ 1 > [ 4.293667] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled > [ 4.305316] SGI XFS Quota Management subsystem > [ 4.309830] initcall init_xfs_fs+0x0/0xce returned 0 after 15782 usecs > [ 4.316412] calling init_befs_fs+0x0/0x8a @ 1 > [ 4.320908] BeFS version: 0.9.3 > [ 4.324243] initcall init_befs_fs+0x0/0x8a returned 0 after 3255 usecs > [ 4.330823] calling init_btrfs_fs+0x0/0xbc @ 1 > [ 4.336775] Btrfs loaded > [ 4.339354] initcall init_btrfs_fs+0x0/0xbc returned 0 after 3745 usecs > [ 4.346134] calling init_gfs2_fs+0x0/0x1ce @ 1 > [ 4.351640] GFS2 (built Feb 8 2009 06:53:45) installed > [ 4.356921] initcall init_gfs2_fs+0x0/0x1ce returned 0 after 6061 usecs > [ 4.363628] calling init_lock_dlm+0x0/0x6b @ 1 > [ 4.368220] Lock_DLM (built Feb 8 2009 06:53:59) installed > [ 4.373845] initcall init_lock_dlm+0x0/0x6b returned 0 after 5501 usecs > [ 4.380508] calling ipc_init+0x0/0x2f @ 1 > [ 4.384661] msgmni has been set to 3996 > [ 4.388562] initcall ipc_init+0x0/0x2f returned 0 after 3818 usecs > [ 4.394791] calling ipc_sysctl_init+0x0/0x14 @ 1 > [ 4.399554] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 4 usecs > [ 4.406128] calling init_mqueue_fs+0x0/0xbd @ 1 > [ 4.410968] initcall init_mqueue_fs+0x0/0xbd returned 0 after 164 usecs > [ 4.417629] calling key_proc_init+0x0/0x5e @ 1 > [ 4.422365] initcall key_proc_init+0x0/0x5e returned 0 after 9 usecs > [ 4.428783] calling crypto_algapi_init+0x0/0xd @ 1 > [ 4.433722] initcall crypto_algapi_init+0x0/0xd returned 0 after 7 usecs > [ 4.440474] calling chainiv_module_init+0x0/0x12 @ 1 > [ 4.445582] initcall chainiv_module_init+0x0/0x12 returned 0 after 2 usecs > [ 4.452504] calling eseqiv_module_init+0x0/0x12 @ 1 > [ 4.457523] initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs > [ 4.464360] calling seqiv_module_init+0x0/0x1c @ 1 > [ 4.469292] initcall seqiv_module_init+0x0/0x1c returned 0 after 0 usecs > [ 4.476042] calling hmac_module_init+0x0/0x12 @ 1 > [ 4.480887] initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs > [ 4.487551] calling crypto_null_mod_init+0x0/0x80 @ 1 > [ 4.492774] alg: No test for cipher_null (cipher_null-generic) > [ 4.498719] alg: No test for digest_null (digest_null-generic) > [ 4.504653] alg: No test for compress_null (compress_null-generic) > [ 4.510891] initcall crypto_null_mod_init+0x0/0x80 returned 0 after 17721 usecs > [ 4.518305] calling md4_mod_init+0x0/0x12 @ 1 > [ 4.522853] initcall md4_mod_init+0x0/0x12 returned 0 after 51 usecs > [ 4.529255] calling md5_mod_init+0x0/0x12 @ 1 > [ 4.533820] initcall md5_mod_init+0x0/0x12 returned 0 after 44 usecs > [ 4.540227] calling rmd128_mod_init+0x0/0x12 @ 1 > [ 4.545061] initcall rmd128_mod_init+0x0/0x12 returned 0 after 51 usecs > [ 4.551727] calling rmd256_mod_init+0x0/0x12 @ 1 > [ 4.556546] initcall rmd256_mod_init+0x0/0x12 returned 0 after 48 usecs > [ 4.563211] calling sha1_generic_mod_init+0x0/0x12 @ 1 > [ 4.568544] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 45 usecs > [ 4.575726] calling sha256_generic_mod_init+0x0/0x49 @ 1 > [ 4.581282] initcall sha256_generic_mod_init+0x0/0x49 returned 0 after 90 usecs > [ 4.588657] calling wp512_mod_init+0x0/0x80 @ 1 > [ 4.593539] initcall wp512_mod_init+0x0/0x80 returned 0 after 197 usecs > [ 4.600200] calling tgr192_mod_init+0x0/0x72 @ 1 > [ 4.605114] initcall tgr192_mod_init+0x0/0x72 returned 0 after 139 usecs > [ 4.611867] calling crypto_ecb_module_init+0x0/0x12 @ 1 > [ 4.617249] initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 1 usecs > [ 4.624432] calling crypto_cbc_module_init+0x0/0x12 @ 1 > [ 4.629798] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs > [ 4.636981] calling crypto_pcbc_module_init+0x0/0x12 @ 1 > [ 4.642434] initcall crypto_pcbc_module_init+0x0/0x12 returned 0 after 0 usecs > [ 4.649721] calling crypto_module_init+0x0/0x12 @ 1 > [ 4.654740] initcall crypto_module_init+0x0/0x12 returned 0 after 0 usecs > [ 4.661577] calling crypto_ctr_module_init+0x0/0x44 @ 1 > [ 4.666944] initcall crypto_ctr_module_init+0x0/0x44 returned 0 after 1 usecs > [ 4.674126] calling crypto_gcm_module_init+0x0/0x62 @ 1 > [ 4.679493] initcall crypto_gcm_module_init+0x0/0x62 returned 0 after 1 usecs > [ 4.686675] calling crypto_ccm_module_init+0x0/0x62 @ 1 > [ 4.692042] initcall crypto_ccm_module_init+0x0/0x62 returned 0 after 1 usecs > [ 4.699225] calling des_generic_mod_init+0x0/0x44 @ 1 > [ 4.704525] initcall des_generic_mod_init+0x0/0x44 returned 0 after 104 usecs > [ 4.711706] calling fcrypt_mod_init+0x0/0x12 @ 1 > [ 4.716507] alg: No test for fcrypt (fcrypt-generic) > [ 4.721534] initcall fcrypt_mod_init+0x0/0x12 returned 0 after 4933 usecs > [ 4.728386] calling blowfish_mod_init+0x0/0x12 @ 1 > [ 4.733772] initcall blowfish_mod_init+0x0/0x12 returned 0 after 448 usecs > [ 4.740696] calling twofish_mod_init+0x0/0x12 @ 1 > [ 4.745624] initcall twofish_mod_init+0x0/0x12 returned 0 after 76 usecs > [ 4.752379] calling serpent_mod_init+0x0/0x44 @ 1 > [ 4.757360] initcall serpent_mod_init+0x0/0x44 returned 0 after 117 usecs > [ 4.764200] calling aes_init+0x0/0x12 @ 1 > [ 4.768429] initcall aes_init+0x0/0x12 returned 0 after 67 usecs > [ 4.774487] calling camellia_init+0x0/0x12 @ 1 > [ 4.779148] initcall camellia_init+0x0/0x12 returned 0 after 59 usecs > [ 4.785641] calling cast5_mod_init+0x0/0x12 @ 1 > [ 4.790379] initcall cast5_mod_init+0x0/0x12 returned 0 after 58 usecs > [ 4.796961] calling arc4_init+0x0/0x12 @ 1 > [ 4.801613] initcall arc4_init+0x0/0x12 returned 0 after 56 usecs > [ 4.807758] calling khazad_mod_init+0x0/0x12 @ 1 > [ 4.812597] initcall khazad_mod_init+0x0/0x12 returned 0 after 70 usecs > [ 4.819259] calling anubis_mod_init+0x0/0x12 @ 1 > [ 4.824108] initcall anubis_mod_init+0x0/0x12 returned 0 after 79 usecs > [ 4.830769] calling deflate_mod_init+0x0/0x12 @ 1 > [ 4.836009] initcall deflate_mod_init+0x0/0x12 returned 0 after 377 usecs > [ 4.842858] calling michael_mic_init+0x0/0x12 @ 1 > [ 4.847760] initcall michael_mic_init+0x0/0x12 returned 0 after 54 usecs > [ 4.854507] calling crc32c_mod_init+0x0/0x12 @ 1 > [ 4.859334] initcall crc32c_mod_init+0x0/0x12 returned 0 after 58 usecs > [ 4.865999] calling crypto_authenc_module_init+0x0/0x12 @ 1 > [ 4.871719] initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 1 usecs > [ 4.879267] calling krng_mod_init+0x0/0x12 @ 1 > [ 4.883878] alg: No test for stdrng (krng) > [ 4.888040] initcall krng_mod_init+0x0/0x12 returned 0 after 4089 usecs > [ 4.894712] calling prng_mod_init+0x0/0x2a @ 1 > [ 4.899320] alg: No test for stdrng (ansi_cprng) > [ 4.904010] initcall prng_mod_init+0x0/0x2a returned 0 after 4603 usecs > [ 4.910675] calling proc_genhd_init+0x0/0x3c @ 1 > [ 4.915443] initcall proc_genhd_init+0x0/0x3c returned 0 after 9 usecs > [ 4.922020] calling bsg_init+0x0/0x12f @ 1 > [ 4.926542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > [ 4.934008] initcall bsg_init+0x0/0x12f returned 0 after 7567 usecs > [ 4.940331] calling noop_init+0x0/0x14 @ 1 > [ 4.944563] io scheduler noop registered (default) > [ 4.949406] initcall noop_init+0x0/0x14 returned 0 after 4729 usecs > [ 4.955724] calling libcrc32c_mod_init+0x0/0x2c @ 1 > [ 4.960737] initcall libcrc32c_mod_init+0x0/0x2c returned 0 after 3 usecs > [ 4.967571] calling dynamic_printk_init+0x0/0x101 @ 1 > [ 4.973492] initcall dynamic_printk_init+0x0/0x101 returned 0 after 719 usecs > [ 4.980680] calling pci_init+0x0/0x46 @ 1 > [ 4.984855] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 > [ 4.991170] pci 0000:00:1d.0: Performing full reset > [ 4.996110] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 > [ 5.002428] pci 0000:00:1d.1: Performing full reset > [ 5.007375] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 > [ 5.013685] pci 0000:00:1d.2: Performing full reset > [ 5.018624] pci 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 > [ 5.024938] pci 0000:00:1d.3: Performing full reset > [ 5.029927] pci 0000:04:00.0: Boot video device > [ 5.034517] initcall pci_init+0x0/0x46 returned 0 after 48524 usecs > [ 5.040831] calling pci_proc_init+0x0/0x7b @ 1 > [ 5.045531] initcall pci_proc_init+0x0/0x7b returned 0 after 120 usecs > [ 5.052107] calling pcie_portdrv_init+0x0/0x50 @ 1 > [ 5.057189] pcieport-driver 0000:00:01.0: setting latency timer to 64 > [ 5.063842] pcieport-driver 0000:00:1c.0: setting latency timer to 64 > [ 5.070625] pcieport-driver 0000:00:1c.3: setting latency timer to 64 > [ 5.077381] initcall pcie_portdrv_init+0x0/0x50 returned 0 after 19864 usecs > [ 5.084490] calling aer_service_init+0x0/0x29 @ 1 > [ 5.089416] initcall aer_service_init+0x0/0x29 returned 0 after 83 usecs > [ 5.096168] calling pci_hotplug_init+0x0/0x51 @ 1 > [ 5.101044] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 5.106665] initcall pci_hotplug_init+0x0/0x51 returned 0 after 5487 usecs > [ 5.113587] calling pcied_init+0x0/0x82 @ 1 > [ 5.119378] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 5.126044] initcall pcied_init+0x0/0x82 returned 0 after 7947 usecs > [ 5.132476] calling acpiphp_init+0x0/0x65 @ 1 > [ 5.136969] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > [ 5.155614] initcall acpiphp_init+0x0/0x65 returned -19 after 18207 usecs > [ 5.162452] calling shpcd_init+0x0/0x68 @ 1 > [ 5.166877] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 5.173632] initcall shpcd_init+0x0/0x68 returned 0 after 6695 usecs > [ 5.180073] calling pci_stub_init+0x0/0x25 @ 1 > [ 5.184747] initcall pci_stub_init+0x0/0x25 returned 0 after 89 usecs > [ 5.191242] calling mbp_init+0x0/0xee @ 1 > [ 5.195413] initcall mbp_init+0x0/0xee returned -19 after 2 usecs > [ 5.201555] calling pm2fb_init+0x0/0x132 @ 1 > [ 5.206054] initcall pm2fb_init+0x0/0x132 returned 0 after 86 usecs > [ 5.212371] calling rivafb_init+0x0/0x1a3 @ 1 > [ 5.216889] rivafb_setup START > [ 5.220091] initcall rivafb_init+0x0/0x1a3 returned 0 after 3125 usecs > [ 5.226670] calling atyfb_init+0x0/0x1d0 @ 1 > [ 5.231185] initcall atyfb_init+0x0/0x1d0 returned 0 after 84 usecs > [ 5.237504] calling aty128fb_init+0x0/0x120 @ 1 > [ 5.242286] initcall aty128fb_init+0x0/0x120 returned 0 after 93 usecs > [ 5.248867] calling sisfb_init+0x0/0x825 @ 1 > [ 5.253389] initcall sisfb_init+0x0/0x825 returned 0 after 95 usecs > [ 5.259708] calling viafb_init+0x0/0x1252 @ 1 > [ 5.264219] VIA Graphics Intergration Chipset framebuffer 2.4 initializing > [ 5.271196] I2C adapter driver [via_i2c] forgot to specify physical device > [ 5.278213] i2c-adapter i2c-0: adapter [via_i2c] registered > [ 5.283868] i2c-adapter i2c-0: master_xfer[0] W, addr=0x08, len=1 > [ 5.290029] i2c-adapter i2c-0: master_xfer[1] R, addr=0x08, len=1 > [ 5.376005] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 > [ 5.540006] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 > [ 5.704006] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 > [ 5.868005] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 > [ 5.874062] i2c-adapter i2c-0: Used 4 tries to write to client at 0x08: failed, timeout? > [ 5.882216] i2c-adapter i2c-0: NAK from device addr 0x08 msg #0 > [ 5.968047] i2c-adapter i2c-0: master_xfer[0] W, addr=0x08, len=1 > [ 5.974186] i2c-adapter i2c-0: master_xfer[1] R, addr=0x08, len=1 > [ 6.060005] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 > [ 6.224005] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 > [ 6.388004] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 > [ 6.552005] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 > [ 6.558059] i2c-adapter i2c-0: Used 4 tries to write to client at 0x08: failed, timeout? > [ 6.566214] i2c-adapter i2c-0: NAK from device addr 0x08 msg #0 > [ 6.652060] i2c-adapter i2c-0: master_xfer[0] W, addr=0x08, len=1 > [ 6.658204] i2c-adapter i2c-0: master_xfer[1] R, addr=0x08, len=1 > [ 6.744004] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 > [ 6.908005] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 > [ 7.072005] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 > [ 7.236005] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 > [ 7.242059] i2c-adapter i2c-0: Used 4 tries to write to client at 0x08: failed, timeout? > [ 7.250214] i2c-adapter i2c-0: NAK from device addr 0x08 msg #0 > [ 7.336047] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 > [ 7.342185] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 > [ 7.428005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 7.592005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 7.756005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 7.920005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 7.926059] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? > [ 7.934214] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 > [ 8.020047] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 > [ 8.026185] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 > [ 8.112005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 8.276006] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 8.440005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 8.604005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 8.610058] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? > [ 8.618213] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 > [ 8.704047] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 > [ 8.710192] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 > [ 8.796005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 8.960004] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 9.124005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 9.288005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 9.294057] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? > [ 9.302212] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 > [ 9.388052] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 > [ 9.394192] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 > [ 9.480005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 9.644005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 9.808005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 9.972004] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 9.978057] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? > [ 9.986212] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 > [ 10.072047] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 > [ 10.078192] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 > [ 10.164005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 10.328005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 10.492005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 10.656005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 10.662056] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? > [ 10.670212] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 > [ 10.756047] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 > [ 10.762191] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 > [ 10.848005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 11.012004] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 11.176005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 11.340005] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 > [ 11.346055] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? > [ 11.354211] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 > [ 11.440047] i2c-adapter i2c-0: master_xfer[0] W, addr=0x40, len=1 > [ 11.446190] i2c-adapter i2c-0: master_xfer[1] R, addr=0x40, len=1 > [ 11.532004] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 11.696005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 11.860005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 12.024004] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 12.030056] i2c-adapter i2c-0: Used 4 tries to write to client at 0x40: failed, timeout? > [ 12.038211] i2c-adapter i2c-0: NAK from device addr 0x40 msg #0 > [ 12.124047] i2c-adapter i2c-0: master_xfer[0] W, addr=0x40, len=1 > [ 12.130190] i2c-adapter i2c-0: master_xfer[1] R, addr=0x40, len=1 > [ 12.216005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 12.380005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 12.544005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 12.708005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 12.714409] i2c-adapter i2c-0: Used 4 tries to write to client at 0x40: failed, timeout? > [ 12.722564] i2c-adapter i2c-0: NAK from device addr 0x40 msg #0 > [ 12.808047] i2c-adapter i2c-0: master_xfer[0] W, addr=0x40, len=1 > [ 12.814189] i2c-adapter i2c-0: master_xfer[1] R, addr=0x40, len=1 > [ 12.900005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 13.064005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 13.228004] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 13.392005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 13.398062] i2c-adapter i2c-0: Used 4 tries to write to client at 0x40: failed, timeout? > [ 13.406218] i2c-adapter i2c-0: NAK from device addr 0x40 msg #0 > [ 13.492046] i2c-adapter i2c-0: master_xfer[0] W, addr=0x40, len=1 > [ 13.498188] i2c-adapter i2c-0: master_xfer[1] R, addr=0x40, len=1 > [ 13.584005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 13.748005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 13.912005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 14.076005] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 > [ 14.082062] i2c-adapter i2c-0: Used 4 tries to write to client at 0x40: failed, timeout? > [ 14.090217] i2c-adapter i2c-0: NAK from device addr 0x40 msg #0 > [ 14.176047] i2c-adapter i2c-0: master_xfer[0] W, addr=0x38, len=1 > [ 14.182187] i2c-adapter i2c-0: master_xfer[1] R, addr=0x38, len=1 > [ 14.268005] i2c-adapter i2c-0: i2c_outb: 0x70, timeout at bit #7 > [ 14.432005] i2c-adapter i2c-0: i2c_outb: 0x70, timeout at bit #7 > [ 14.596005] i2c-adapter i2c-0: i2c_outb: 0x70, timeout at bit #7 > [ 14.760005] i2c-adapter i2c-0: i2c_outb: 0x70, timeout at bit #7 > [ 14.766061] i2c-adapter i2c-0: Used 4 tries to write to client at 0x38: failed, timeout? > [ 14.774217] i2c-adapter i2c-0: NAK from device addr 0x38 msg #0 > [ 14.860050] ioremap failed > [ 14.862803] initcall viafb_init+0x0/0x1252 returned -1 after 9373618 usecs > [ 14.869725] initcall viafb_init+0x0/0x1252 returned with error code -1 > [ 14.876389] calling tdfxfb_init+0x0/0x11e @ 1 > [ 14.880990] initcall tdfxfb_init+0x0/0x11e returned 0 after 99 usecs > [ 14.887397] calling imsttfb_init+0x0/0x131 @ 1 > [ 14.892073] initcall imsttfb_init+0x0/0x131 returned 0 after 88 usecs > [ 14.898559] calling vt8623fb_init+0x0/0x98 @ 1 > [ 14.903254] initcall vt8623fb_init+0x0/0x98 returned 0 after 97 usecs > [ 14.909748] calling s3fb_init+0x0/0xfe @ 1 > [ 14.914092] initcall s3fb_init+0x0/0xfe returned 0 after 93 usecs > [ 14.920235] calling hecubafb_init+0x0/0x12 @ 1 > [ 14.924918] initcall hecubafb_init+0x0/0x12 returned 0 after 84 usecs > [ 14.931406] calling tmiofb_init+0x0/0x6b @ 1 > [ 14.935912] initcall tmiofb_init+0x0/0x6b returned 0 after 79 usecs > [ 14.942231] calling mb862xxfb_init+0x0/0xb @ 1 > [ 14.946829] initcall mb862xxfb_init+0x0/0xb returned -19 after 0 usecs > [ 14.953411] calling acpi_reserve_resources+0x0/0xeb @ 1 > [ 14.958782] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 5 usecs > [ 14.965970] calling acpi_ac_init+0x0/0x28 @ 1 > [ 14.970577] initcall acpi_ac_init+0x0/0x28 returned 0 after 107 usecs > [ 14.977071] calling acpi_battery_init+0x0/0x28 @ 1 > [ 14.982108] initcall acpi_battery_init+0x0/0x28 returned 0 after 90 usecs > [ 14.988944] calling acpi_button_init+0x0/0x5e @ 1 > [ 14.993986] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > [ 15.001885] ACPI: Power Button (FF) [PWRF] > [ 15.006206] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > [ 15.014883] ACPI: Power Button (CM) [PWRB] > [ 15.019119] initcall acpi_button_init+0x0/0x5e returned 0 after 24723 usecs > [ 15.026134] calling acpi_fan_init+0x0/0x5e @ 1 > [ 15.030826] initcall acpi_fan_init+0x0/0x5e returned 0 after 94 usecs > [ 15.037314] calling irqrouter_init_sysfs+0x0/0x38 @ 1 > [ 15.042678] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 157 usecs > [ 15.049862] calling acpi_processor_init+0x0/0xad @ 1 > [ 15.055933] processor ACPI_CPU:00: registered as cooling_device0 > [ 15.062000] ACPI: Processor [CPU1] (supports 8 throttling states) > [ 15.068433] initcall acpi_processor_init+0x0/0xad returned 0 after 13137 usecs > [ 15.075726] calling rand_initialize+0x0/0x30 @ 1 > [ 15.080509] initcall rand_initialize+0x0/0x30 returned 0 after 13 usecs > [ 15.087172] calling tty_init+0x0/0xfa @ 1 > [ 15.128250] initcall tty_init+0x0/0xfa returned 0 after 36056 usecs > [ 15.134578] calling pty_init+0x0/0x3cb @ 1 > [ 15.139022] initcall pty_init+0x0/0x3cb returned 0 after 146 usecs > [ 15.145258] calling sysrq_init+0x0/0x25 @ 1 > [ 15.149620] initcall sysrq_init+0x0/0x25 returned 0 after 16 usecs > [ 15.155847] calling cy_init+0x0/0x16b @ 1 > [ 15.160000] Cyclades driver 2.5 (built Feb 8 2009 06:54:01) > [ 15.165840] initcall cy_init+0x0/0x16b returned 0 after 5702 usecs > [ 15.172072] calling istallion_module_init+0x0/0x560 @ 1 > [ 15.177445] Stallion Intelligent Multiport Serial Driver: version 5.6.0 > [ 15.184682] initcall istallion_module_init+0x0/0x560 returned 0 after 7065 usecs > [ 15.192144] calling epca_module_init+0x0/0x501 @ 1 > [ 15.197086] DIGI epca driver version 1.3.0.1-LK2.6 loaded. > [ 15.278321] initcall epca_module_init+0x0/0x501 returned 0 after 79324 usecs > [ 15.285682] calling specialix_init_module+0x0/0x45d @ 1 > [ 15.291336] sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998. > [ 15.297866] sx: derived from work (c) D.Gorodchanin 1994-1996. > [ 15.303750] sx: DTR/RTS pin is always RTS. > [ 15.319040] sx0: specialix IO8+ Board at 0x100 not found. > [ 15.324514] sx1: specialix IO8+ Board at 0x180 not found. > [ 15.330280] sx2: specialix IO8+ Board at 0x250 not found. > [ 15.335985] sx3: specialix IO8+ Board at 0x260 not found. > [ 15.351760] sx: No specialix IO8+ boards detected. > [ 15.356624] initcall specialix_init_module+0x0/0x45d returned -5 after 63749 usecs > [ 15.364495] initcall specialix_init_module+0x0/0x45d returned with error code -5 > [ 15.372292] calling isicom_init+0x0/0x21f @ 1 > [ 15.376954] initcall isicom_init+0x0/0x21f returned 0 after 150 usecs > [ 15.383443] calling synclink_init+0x0/0x294 @ 1 > [ 15.388217] SyncLink serial driver $Revision: 4.38 $ > [ 15.415174] SyncLink serial driver $Revision: 4.38 $, tty major#252 > [ 15.421749] initcall synclink_init+0x0/0x294 returned 0 after 32740 usecs > [ 15.428830] calling sx_init+0x0/0x120 @ 1 > [ 15.433262] initcall sx_init+0x0/0x120 returned 0 after 261 usecs > [ 15.439405] calling rio_init+0x0/0x12d6 @ 1 > [ 15.445805] initcall rio_init+0x0/0x12d6 returned -5 after 1962 usecs > [ 15.452301] initcall rio_init+0x0/0x12d6 returned with error code -5 > [ 15.458829] calling raw_init+0x0/0xea @ 1 > [ 15.463192] initcall raw_init+0x0/0xea returned 0 after 210 usecs > [ 15.469339] calling applicom_init+0x0/0x4ff @ 1 > [ 15.474118] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ > [ 15.481418] ac.o: No PCI boards found. > [ 15.485223] ac.o: For an ISA board you must supply memory and irq parameters. > [ 15.492410] initcall applicom_init+0x0/0x4ff returned -6 after 17860 usecs > [ 15.499333] initcall applicom_init+0x0/0x4ff returned with error code -6 > [ 15.506171] calling hpet_init+0x0/0x6d @ 1 > [ 15.510656] initcall hpet_init+0x0/0x6d returned 0 after 240 usecs > [ 15.516884] calling nvram_init+0x0/0x94 @ 1 > [ 15.521357] Non-volatile memory driver v1.3 > [ 15.525595] initcall nvram_init+0x0/0x94 returned 0 after 4263 usecs > [ 15.532096] calling agp_init+0x0/0x38 @ 1 > [ 15.536243] Linux agpgart interface v0.103 > [ 15.540387] initcall agp_init+0x0/0x38 returned 0 after 4045 usecs > [ 15.546618] calling agp_intel_init+0x0/0x2c @ 1 > [ 15.551423] initcall agp_intel_init+0x0/0x2c returned 0 after 129 usecs > [ 15.558085] calling agp_sis_init+0x0/0x2c @ 1 > [ 15.562688] initcall agp_sis_init+0x0/0x2c returned 0 after 86 usecs > [ 15.569091] calling ipmi_init_msghandler_mod+0x0/0xd @ 1 > [ 15.574644] ipmi message handler version 39.2 > [ 15.579058] initcall ipmi_init_msghandler_mod+0x0/0xd returned 0 after 4390 usecs > [ 15.586623] calling init_ipmi_devintf+0x0/0x107 @ 1 > [ 15.591640] ipmi device interface > [ 15.595091] initcall init_ipmi_devintf+0x0/0x107 returned 0 after 3368 usecs > [ 15.602192] calling init_ipmi_si+0x0/0x88b @ 1 > [ 15.606873] IPMI System Interface driver. > [ 15.660196] ipmi_si: Unable to find any System Interface(s) > [ 15.665821] initcall init_ipmi_si+0x0/0x88b returned -19 after 57647 usecs > [ 15.672745] calling hangcheck_init+0x0/0x93 @ 1 > [ 15.677415] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). > [ 15.686436] Hangcheck: Using get_cycles(). > [ 15.690581] initcall hangcheck_init+0x0/0x93 returned 0 after 12856 usecs > [ 15.697417] calling intelfb_init+0x0/0x230 @ 1 > [ 15.702002] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets > [ 15.713623] intelfb: Version 0.9.6 > [ 15.717171] initcall intelfb_init+0x0/0x230 returned 0 after 14812 usecs > [ 15.723921] calling serial8250_init+0x0/0x136 @ 1 > [ 15.728786] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 15.735280] async_waiting @ 1 > [ 15.738299] async_continuing @ 1 after 0 usec > [ 15.868096] async_waiting @ 1 > [ 15.871108] async_continuing @ 1 after 0 usec > [ 16.000128] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 16.006968] initcall serial8250_init+0x0/0x136 returned 0 after 271661 usecs > [ 16.014065] calling parport_default_proc_register+0x0/0x20 @ 1 > [ 16.020041] initcall parport_default_proc_register+0x0/0x20 returned 0 after 4 usecs > [ 16.027851] calling parport_pc_init+0x0/0x41f @ 1 > [ 16.033042] parport_pc 00:07: reported by Plug and Play ACPI > [ 16.038858] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] > [ 16.144861] initcall parport_pc_init+0x0/0x41f returned 0 after 109543 usecs > [ 16.151959] calling floppy_init+0x0/0x125f @ 1 > [ 16.156619] Floppy drive(s): fd0 is 1.44M > [ 16.179649] FDC 0 is a post-1991 82077 > [ 16.184662] initcall floppy_init+0x0/0x125f returned 0 after 27458 usecs > [ 16.191409] calling brd_init+0x0/0x1cc @ 1 > [ 16.199331] brd: module loaded > [ 16.202481] initcall brd_init+0x0/0x1cc returned 0 after 6677 usecs > [ 16.208796] calling cpqarray_init+0x0/0x2c7 @ 1 > [ 16.213465] Compaq SMART2 Driver (v 2.6.0) > [ 16.217802] initcall cpqarray_init+0x0/0x2c7 returned -19 after 4232 usecs > [ 16.224725] calling pkt_init+0x0/0x1cd @ 1 > [ 16.229658] initcall pkt_init+0x0/0x1cd returned 0 after 328 usecs > [ 16.235887] calling carm_init+0x0/0x1b @ 1 > [ 16.240867] initcall carm_init+0x0/0x1b returned 0 after 520 usecs > [ 16.247103] calling wm8400_module_init+0x0/0x38 @ 1 > [ 16.252235] i2c-core: driver [WM8400] registered > [ 16.256907] initcall wm8400_module_init+0x0/0x38 returned 0 after 4647 usecs > [ 16.264079] calling pcf50633_init+0x0/0x1e @ 1 > [ 16.268745] i2c-core: driver [pcf50633] registered > [ 16.273589] initcall pcf50633_init+0x0/0x1e returned 0 after 4808 usecs > [ 16.280274] calling e1000_init_module+0x0/0x70 @ 1 > [ 16.285199] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 > [ 16.291343] e1000e: Copyright (c) 1999-2008 Intel Corporation. > [ 16.297327] initcall e1000_init_module+0x0/0x70 returned 0 after 11842 usecs > [ 16.304423] calling ixgbe_init_module+0x0/0x5a @ 1 > [ 16.309385] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.30-k2 > [ 16.317283] ixgbe: Copyright (c) 1999-2007 Intel Corporation. > [ 16.323178] initcall ixgbe_init_module+0x0/0x5a returned 0 after 13468 usecs > [ 16.330275] calling t1_init_module+0x0/0x1b @ 1 > [ 16.335049] initcall t1_init_module+0x0/0x1b returned 0 after 86 usecs > [ 16.341630] calling vcan_init_module+0x0/0x3a @ 1 > [ 16.346487] vcan: Virtual CAN interface driver > [ 16.350982] initcall vcan_init_module+0x0/0x3a returned 0 after 4388 usecs > [ 16.357904] calling jme_init_module+0x0/0x30 @ 1 > [ 16.362662] jme: JMicron JMC250 gigabit ethernet driver version 1.0.3 > [ 16.369246] initcall jme_init_module+0x0/0x30 returned 0 after 6428 usecs > [ 16.376088] calling rr_init_module+0x0/0x1b @ 1 > [ 16.380861] initcall rr_init_module+0x0/0x1b returned 0 after 85 usecs > [ 16.387441] calling gem_init+0x0/0x1b @ 1 > [ 16.391695] initcall gem_init+0x0/0x1b returned 0 after 85 usecs > [ 16.397754] calling vortex_init+0x0/0xc3 @ 1 > [ 16.402268] initcall vortex_init+0x0/0xc3 returned 0 after 86 usecs > [ 16.408588] calling e100_init_module+0x0/0x5f @ 1 > [ 16.413446] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI > [ 16.419584] e100: Copyright(c) 1999-2006 Intel Corporation > [ 16.425211] initcall e100_init_module+0x0/0x5f returned 0 after 11488 usecs > [ 16.432222] calling ns83820_init+0x0/0x29 @ 1 > [ 16.436732] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. > [ 16.443656] initcall ns83820_init+0x0/0x29 returned 0 after 6760 usecs > [ 16.450231] calling tg3_init+0x0/0x1b @ 1 > [ 16.454487] initcall tg3_init+0x0/0x1b returned 0 after 87 usecs > [ 16.460545] calling bnx2x_init+0x0/0x55 @ 1 > [ 16.465010] initcall bnx2x_init+0x0/0x55 returned 0 after 123 usecs > [ 16.471325] calling skge_init_module+0x0/0x1b @ 1 > [ 16.476266] initcall skge_init_module+0x0/0x1b returned 0 after 87 usecs > [ 16.483017] calling sky2_init_module+0x0/0x29 @ 1 > [ 16.487874] sky2 driver version 1.22 > [ 16.491540] sky2 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > [ 16.498387] sky2 0000:02:00.0: setting latency timer to 64 > [ 16.503962] sky2 0000:02:00.0: Yukon-2 EC chip revision 2 > [ 16.541275] sky2 0000:02:00.0: Marvell Yukon 88E8053 Gigabit Ethernet Controller > [ 16.548735] Part Number: Yukon 88E8053 > [ 16.552617] Engineering Level: Rev. 1.9 > [ 16.556586] Manufacturer: Marvell > [ 16.560324] sky2 eth0: addr 00:15:f2:e6:8e:6b > [ 16.564821] initcall sky2_init_module+0x0/0x29 returned 0 after 75141 usecs > [ 16.571846] calling starfire_init+0x0/0x1c @ 1 > [ 16.576517] initcall starfire_init+0x0/0x1c returned 0 after 86 usecs > [ 16.583004] calling cicada_init+0x0/0x44 @ 1 > [ 16.587593] initcall cicada_init+0x0/0x44 returned 0 after 168 usecs > [ 16.593995] calling vsc82xx_init+0x0/0x44 @ 1 > [ 16.598678] initcall vsc82xx_init+0x0/0x44 returned 0 after 160 usecs > [ 16.605166] calling realtek_init+0x0/0x12 @ 1 > [ 16.609767] initcall realtek_init+0x0/0x12 returned 0 after 81 usecs > [ 16.616172] calling fixed_mdio_bus_init+0x0/0xce @ 1 > [ 16.621504] Fixed MDIO Bus: probed > [ 16.624961] initcall fixed_mdio_bus_init+0x0/0xce returned 0 after 3573 usecs > [ 16.632160] calling ns_init+0x0/0x12 @ 1 > [ 16.636301] initcall ns_init+0x0/0x12 returned 0 after 80 usecs > [ 16.642266] calling sundance_init+0x0/0x21 @ 1 > [ 16.646957] initcall sundance_init+0x0/0x21 returned 0 after 86 usecs > [ 16.653447] calling net_olddevs_init+0x0/0xae @ 1 > [ 16.658427] initcall net_olddevs_init+0x0/0xae returned 0 after 118 usecs > [ 16.665268] calling init_nic+0x0/0x1b @ 1 > [ 16.669509] initcall init_nic+0x0/0x1b returned 0 after 88 usecs > [ 16.675564] calling ppp_init+0x0/0xa7 @ 1 > [ 16.679730] PPP generic driver version 2.4.2 > [ 16.684301] initcall ppp_init+0x0/0xa7 returned 0 after 4462 usecs > [ 16.690531] calling ppp_mppe_init+0x0/0x117 @ 1 > [ 16.695392] PPP MPPE Compression module registered > [ 16.700239] initcall ppp_mppe_init+0x0/0x117 returned 0 after 4905 usecs > [ 16.707013] calling macvlan_init_module+0x0/0x56 @ 1 > [ 16.712116] initcall macvlan_init_module+0x0/0x56 returned 0 after 3 usecs > [ 16.719037] calling rtl8139_init_module+0x0/0x1b @ 1 > [ 16.724261] initcall rtl8139_init_module+0x0/0x1b returned 0 after 117 usecs > [ 16.731361] calling rio_init+0x0/0x1b @ 1 > [ 16.735624] initcall rio_init+0x0/0x1b returned 0 after 87 usecs > [ 16.741682] calling mlx4_init+0x0/0x79 @ 1 > [ 16.746068] initcall mlx4_init+0x0/0x79 returned 0 after 125 usecs > [ 16.752299] calling mlx4_en_init+0x0/0x17 @ 1 > [ 16.756813] initcall mlx4_en_init+0x0/0x17 returned 0 after 0 usecs > [ 16.763132] calling hdlc_module_init+0x0/0x45 @ 1 > [ 16.767977] HDLC support module revision 1.22 > [ 16.772389] initcall hdlc_module_init+0x0/0x45 returned 0 after 4307 usecs > [ 16.779312] calling mod_init+0x0/0x14 @ 1 > [ 16.783456] initcall mod_init+0x0/0x14 returned 0 after 0 usecs > [ 16.789425] calling fst_init+0x0/0x37 @ 1 > [ 16.793665] initcall fst_init+0x0/0x37 returned 0 after 92 usecs > [ 16.799722] calling kaweth_init+0x0/0x1b @ 1 > [ 16.804235] usbcore: registered new interface driver kaweth > [ 16.809857] initcall kaweth_init+0x0/0x1b returned 0 after 5574 usecs > [ 16.816361] calling pegasus_init+0x0/0x18d @ 1 > [ 16.820938] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver > [ 16.828568] usbcore: registered new interface driver pegasus > [ 16.834280] initcall pegasus_init+0x0/0x18d returned 0 after 13028 usecs > [ 16.841042] calling ipw_init+0x0/0x8e @ 1 > [ 16.845187] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2km > [ 16.852285] ipw2200: Copyright(c) 2003-2006 Intel Corporation > [ 16.858173] initcall ipw_init+0x0/0x8e returned 0 after 12679 usecs > [ 16.864489] calling ieee80211_init+0x0/0x24 @ 1 > [ 16.869173] ieee80211: 802.11 data/management/control stack, git-1.1.13 > [ 16.875832] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@...ux.intel.com> > [ 16.884249] initcall ieee80211_init+0x0/0x24 returned 0 after 14721 usecs > [ 16.891087] calling airo_init_module+0x0/0xf4 @ 1 > [ 16.895940] airo(): Probing for PCI adapters > [ 16.900361] airo(): Finished probing for PCI adapters > [ 16.905466] initcall airo_init_module+0x0/0xf4 returned 0 after 9310 usecs > [ 16.912403] calling prism54_module_init+0x0/0x3c @ 1 > [ 16.917502] Loaded prism54 driver, version 1.2 > [ 16.922088] initcall prism54_module_init+0x0/0x3c returned 0 after 4477 usecs > [ 16.929272] calling init_netconsole+0x0/0x214 @ 1 > [ 16.934131] console [netcon0] enabled > [ 16.937843] netconsole: network logging started > [ 16.942420] initcall init_netconsole+0x0/0x214 returned 0 after 8095 usecs > [ 16.949343] calling efx_init_module+0x0/0xcb @ 1 > [ 16.954092] Solarflare NET driver v2.3 > [ 16.958035] initcall efx_init_module+0x0/0xcb returned 0 after 3848 usecs > [ 16.964875] calling dabusb_init+0x0/0xd2 @ 1 > [ 16.969383] usbcore: registered new interface driver dabusb > [ 16.975006] dabusb: v1.54:DAB-USB Interface Driver for Linux (c)1999 > [ 16.981425] initcall dabusb_init+0x0/0xd2 returned 0 after 11841 usecs > [ 16.988006] calling spi_transport_init+0x0/0x30 @ 1 > [ 16.993186] initcall spi_transport_init+0x0/0x30 returned 0 after 157 usecs > [ 17.000201] calling fc_transport_init+0x0/0x4e @ 1 > [ 17.005461] initcall fc_transport_init+0x0/0x4e returned 0 after 309 usecs > [ 17.012385] calling iscsi_transport_init+0x0/0x153 @ 1 > [ 17.017683] Loading iSCSI transport class v2.0-870. > [ 17.023059] initcall iscsi_transport_init+0x0/0x153 returned 0 after 5248 usecs > [ 17.030440] calling scsi_dh_init+0x0/0x42 @ 1 > [ 17.034977] initcall scsi_dh_init+0x0/0x42 returned 0 after 1 usecs > [ 17.041298] calling hp_sw_init+0x0/0x12 @ 1 > [ 17.045622] hp_sw: device handler registered > [ 17.049937] initcall hp_sw_init+0x0/0x12 returned 0 after 4214 usecs > [ 17.056342] calling iscsi_sw_tcp_init+0x0/0x52 @ 1 > [ 17.061401] iscsi: registered transport (tcp) > [ 17.065809] initcall iscsi_sw_tcp_init+0x0/0x52 returned 0 after 4427 usecs > [ 17.072869] calling BusLogic_init+0x0/0x1b3c @ 1 > [ 17.077684] initcall BusLogic_init+0x0/0x1b3c returned 0 after 53 usecs > [ 17.084345] calling ahc_linux_init+0x0/0x67 @ 1 > [ 17.089123] initcall ahc_linux_init+0x0/0x67 returned 0 after 102 usecs > [ 17.095785] calling ahd_linux_init+0x0/0x83 @ 1 > [ 17.100586] initcall ahd_linux_init+0x0/0x83 returned 0 after 107 usecs > [ 17.107251] calling aac_init+0x0/0x7f @ 1 > [ 17.111424] Adaptec aacraid driver 1.1-5[2456]-ms > [ 17.116282] initcall aac_init+0x0/0x7f returned 0 after 4743 usecs > [ 17.122513] calling qla1280_init+0x0/0x1b @ 1 > [ 17.127124] initcall qla1280_init+0x0/0x1b returned 0 after 94 usecs > [ 17.133529] calling qla4xxx_module_init+0x0/0x14d @ 1 > [ 17.139039] iscsi: registered transport (qla4xxx) > [ 17.143892] QLogic iSCSI HBA Driver > [ 17.147445] initcall qla4xxx_module_init+0x0/0x14d returned 0 after 8503 usecs > [ 17.154736] calling lpfc_init+0x0/0xdf @ 1 > [ 17.158972] Emulex LightPulse Fibre Channel SCSI driver 8.3.0 > [ 17.164770] Copyright(c) 2004-2008 Emulex. All rights reserved. > [ 17.170930] initcall lpfc_init+0x0/0xdf returned 0 after 11675 usecs > [ 17.177329] calling dc390_module_init+0x0/0xa0 @ 1 > [ 17.182281] DC390: clustering now enabled by default. If you get problems load > [ 17.189566] with "disable_clustering=1" and report to maintainers > [ 17.196415] initcall dc390_module_init+0x0/0xa0 returned 0 after 13800 usecs > [ 17.203512] calling mraid_mm_init+0x0/0x8c @ 1 > [ 17.208117] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) > [ 17.215640] initcall mraid_mm_init+0x0/0x8c returned 0 after 7345 usecs > [ 17.222302] calling megasas_init+0x0/0x172 @ 1 > [ 17.227246] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 > [ 17.233231] initcall megasas_init+0x0/0x172 returned 0 after 5843 usecs > [ 17.239895] calling gdth_init+0x0/0xf7 @ 1 > [ 17.244148] GDT-HA: Storage RAID Controller Driver. Version: 3.05 > [ 17.250388] initcall gdth_init+0x0/0xf7 returned 0 after 6093 usecs > [ 17.256708] calling twa_init+0x0/0x30 @ 1 > [ 17.260872] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. > [ 17.268354] initcall twa_init+0x0/0x30 returned 0 after 7305 usecs > [ 17.274588] calling ppa_driver_init+0x0/0x27 @ 1 > [ 17.279358] ppa: Version 2.07 (for Linux 2.4.x) > [ 17.286107] initcall ppa_driver_init+0x0/0x27 returned 0 after 6591 usecs > [ 17.292943] calling imm_driver_init+0x0/0x27 @ 1 > [ 17.297699] imm: Version 2.05 (for Linux 2.4.0) > [ 17.302618] initcall imm_driver_init+0x0/0x27 returned 0 after 4802 usecs > [ 17.309454] calling stex_init+0x0/0x33 @ 1 > [ 17.313689] stex: Promise SuperTrak EX Driver version: 3.6.0000.1 > [ 17.319926] initcall stex_init+0x0/0x33 returned 0 after 6089 usecs > [ 17.326241] calling init_st+0x0/0x1c8 @ 1 > [ 17.330404] st: Version 20081215, fixed bufsize 32768, s/g segs 256 > [ 17.336801] Driver 'st' needs updating - please use bus_type methods > [ 17.343295] initcall init_st+0x0/0x1c8 returned 0 after 12587 usecs > [ 17.349628] calling init_osst+0x0/0x14b @ 1 > [ 17.353948] osst :I: Tape driver with OnStream support version 0.99.4 > [ 17.353949] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ > [ 17.367265] Driver 'osst' needs updating - please use bus_type methods > [ 17.373935] initcall init_osst+0x0/0x14b returned 0 after 19517 usecs > [ 17.380437] calling init_sd+0x0/0x10d @ 1 > [ 17.384676] Driver 'sd' needs updating - please use bus_type methods > [ 17.391158] initcall init_sd+0x0/0x10d returned 0 after 6418 usecs > [ 17.397407] calling init_sr+0x0/0x4e @ 1 > [ 17.401467] Driver 'sr' needs updating - please use bus_type methods > [ 17.407955] initcall init_sr+0x0/0x4e returned 0 after 6335 usecs > [ 17.414095] calling init_ch_module+0x0/0xae @ 1 > [ 17.418786] SCSI Media Changer driver v0.25 > [ 17.423190] Driver 'ch' needs updating - please use bus_type methods > [ 17.429672] initcall init_ch_module+0x0/0xae returned 0 after 10629 usecs > [ 17.436529] calling ahci_init+0x0/0x1b @ 1 > [ 17.440870] initcall ahci_init+0x0/0x1b returned 0 after 105 usecs > [ 17.447098] calling k2_sata_init+0x0/0x1b @ 1 > [ 17.451700] initcall k2_sata_init+0x0/0x1b returned 0 after 88 usecs > [ 17.458104] calling piix_init+0x0/0x29 @ 1 > [ 17.462384] ata_piix 0000:00:1f.1: version 2.12 > [ 17.466986] alloc irq_desc for 22 on cpu 0 node 0 > [ 17.470965] alloc kstat_irqs on cpu 0 node 0 > [ 17.476412] IOAPIC[0]: Set routing entry (2-22 -> 0x59 -> IRQ 22 Mode:1 Active:1) > [ 17.483966] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > [ 17.491190] ata_piix 0000:00:1f.1: setting latency timer to 64 > [ 17.497163] scsi0 : ata_piix > [ 17.500630] scsi1 : ata_piix > [ 17.512401] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 > [ 17.519411] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 > [ 17.688305] ata1.00: unsupported CDB len > [ 22.844294] ata1.00: unsupported CDB len > [ 22.848267] ata1.00: revalidation failed (errno=-22) > [ 22.853276] ata1.00: disabled > [ 22.856299] async_waiting @ 1 > [ 22.859311] async_continuing @ 1 after 0 usec > [ 22.863723] async_waiting @ 1 > [ 22.866744] async_continuing @ 1 after 0 usec > [ 23.034136] async_waiting @ 1 > [ 23.037158] async_continuing @ 1 after 0 usec > [ 23.041581] alloc irq_desc for 23 on cpu 0 node 0 > [ 23.045557] alloc kstat_irqs on cpu 0 node 0 > [ 23.051000] IOAPIC[0]: Set routing entry (2-23 -> 0x61 -> IRQ 23 Mode:1 Active:1) > [ 23.058547] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 > [ 23.065733] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > [ 23.071177] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 23.077127] scsi2 : ata_piix > [ 23.080309] scsi3 : ata_piix > [ 23.083441] ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 23 > [ 23.090632] ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 23 > [ 23.295428] ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 > [ 23.301136] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 23.370406] ata3.00: configured for UDMA/133 > [ 23.374728] async_waiting @ 1 > [ 23.377750] async_continuing @ 1 after 0 usec > [ 23.382196] isa bounce pool size: 16 pages > [ 23.386469] scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 > [ 23.395026] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) > [ 23.402774] sd 2:0:0:0: [sda] Write Protect is off > [ 23.407615] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 23.412796] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 23.422014] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) > [ 23.429759] sd 2:0:0:0: [sda] Write Protect is off > [ 23.434603] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 23.439758] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 23.448870] sda: sda1 sda2 sda3 sda4 < sda5 > > [ 23.494219] sd 2:0:0:0: [sda] Attached SCSI disk > [ 23.499254] async_waiting @ 1 > [ 23.502274] async_continuing @ 1 after 0 usec > [ 23.670154] async_waiting @ 1 > [ 23.673169] async_continuing @ 1 after 0 usec > [ 23.677685] initcall piix_init+0x0/0x29 returned 0 after 6069643 usecs > [ 23.684266] calling sil_init+0x0/0x1b @ 1 > [ 23.688532] initcall sil_init+0x0/0x1b returned 0 after 113 usecs > [ 23.694674] calling sil24_init+0x0/0x1b @ 1 > [ 23.699099] initcall sil24_init+0x0/0x1b returned 0 after 88 usecs > [ 23.705333] calling svia_init+0x0/0x1b @ 1 > [ 23.709681] initcall svia_init+0x0/0x1b returned 0 after 97 usecs > [ 23.715828] calling sis_init+0x0/0x1b @ 1 > [ 23.720094] initcall sis_init+0x0/0x1b returned 0 after 99 usecs > [ 23.726150] calling nv_init+0x0/0x1b @ 1 > [ 23.730326] initcall nv_init+0x0/0x1b returned 0 after 96 usecs > [ 23.736298] calling inic_init+0x0/0x1b @ 1 > [ 23.740640] initcall inic_init+0x0/0x1b returned 0 after 87 usecs > [ 23.746785] calling amd_init+0x0/0x1b @ 1 > [ 23.751039] initcall amd_init+0x0/0x1b returned 0 after 87 usecs > [ 23.757099] calling artop_init+0x0/0x1b @ 1 > [ 23.761526] initcall artop_init+0x0/0x1b returned 0 after 87 usecs > [ 23.767758] calling cmd64x_init+0x0/0x1b @ 1 > [ 23.772272] initcall cmd64x_init+0x0/0x1b returned 0 after 86 usecs > [ 23.778591] calling hpt3x2n_init+0x0/0x1b @ 1 > [ 23.783195] initcall hpt3x2n_init+0x0/0x1b returned 0 after 90 usecs > [ 23.789599] calling it821x_init+0x0/0x1b @ 1 > [ 23.794056] alloc irq_desc for 20 on cpu 0 node 0 > [ 23.798006] alloc kstat_irqs on cpu 0 node 0 > [ 23.803476] IOAPIC[0]: Set routing entry (2-20 -> 0x69 -> IRQ 20 Mode:1 Active:1) > [ 23.811024] pata_it821x 0000:01:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 23.818486] pata_it821x: controller in pass through mode. > [ 23.823965] pata_it821x 0000:01:03.0: setting latency timer to 64 > [ 23.830198] scsi4 : pata_it821x > [ 23.833648] scsi5 : pata_it821x > [ 23.837057] ata5: PATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 20 > [ 23.844241] ata6: PATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 20 > [ 24.014173] async_waiting @ 1 > [ 24.017193] async_continuing @ 1 after 0 usec > [ 24.021597] async_waiting @ 1 > [ 24.024620] async_continuing @ 1 after 0 usec > [ 24.194169] async_waiting @ 1 > [ 24.197192] async_continuing @ 1 after 0 usec > [ 24.201691] initcall it821x_init+0x0/0x1b returned 0 after 398112 usecs > [ 24.208355] calling ninja32_init+0x0/0x1b @ 1 > [ 24.212947] initcall ninja32_init+0x0/0x1b returned 0 after 90 usecs > [ 24.219353] calling ns87415_init+0x0/0x1b @ 1 > [ 24.223955] initcall ns87415_init+0x0/0x1b returned 0 after 91 usecs > [ 24.230359] calling opti_init+0x0/0x1b @ 1 > [ 24.234697] initcall opti_init+0x0/0x1b returned 0 after 86 usecs > [ 24.240838] calling mpiix_init+0x0/0x1b @ 1 > [ 24.245274] initcall mpiix_init+0x0/0x1b returned 0 after 97 usecs > [ 24.251506] calling oldpiix_init+0x0/0x1b @ 1 > [ 24.256110] initcall oldpiix_init+0x0/0x1b returned 0 after 87 usecs > [ 24.262513] calling rz1000_init+0x0/0x1b @ 1 > [ 24.267027] initcall rz1000_init+0x0/0x1b returned 0 after 87 usecs > [ 24.273346] calling sc1200_init+0x0/0x1b @ 1 > [ 24.277861] initcall sc1200_init+0x0/0x1b returned 0 after 87 usecs > [ 24.284180] calling via_init+0x0/0x1b @ 1 > [ 24.288436] initcall via_init+0x0/0x1b returned 0 after 90 usecs > [ 24.294492] calling sis_init+0x0/0x1b @ 1 > [ 24.298747] initcall sis_init+0x0/0x1b returned 0 after 87 usecs > [ 24.304806] calling triflex_init+0x0/0x1f @ 1 > [ 24.309407] initcall triflex_init+0x0/0x1f returned 0 after 87 usecs > [ 24.315813] calling fw_core_init+0x0/0xbe @ 1 > [ 24.320423] initcall fw_core_init+0x0/0xbe returned 0 after 97 usecs > [ 24.326827] calling cdrom_init+0x0/0x77 @ 1 > [ 24.331167] initcall cdrom_init+0x0/0x77 returned 0 after 9 usecs > [ 24.337315] calling gpio_vbus_init+0x0/0x19 @ 1 > [ 24.342156] initcall gpio_vbus_init+0x0/0x19 returned -19 after 165 usecs > [ 24.348998] calling mon_init+0x0/0x105 @ 1 > [ 24.353510] initcall mon_init+0x0/0x105 returned 0 after 255 usecs > [ 24.359744] calling ehci_hcd_init+0x0/0xe9 @ 1 > [ 24.364350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 24.370923] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 > [ 24.377012] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 24.384216] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 24.390104] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 24.395512] drivers/usb/core/inode.c: creating file 'devices' > [ 24.401318] drivers/usb/core/inode.c: creating file '001' > [ 24.406926] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > [ 24.414396] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 > [ 24.423780] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr > [ 24.432136] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT > [ 24.444950] ehci_hcd 0000:00:1d.7: debug port 1 > [ 24.449533] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported > [ 24.456453] ehci_hcd 0000:00:1d.7: supports USB remote wakeup > [ 24.462251] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd7cff800 > [ 24.467966] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT > [ 24.480771] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN > [ 24.500010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 24.505849] usb usb1: default language 0x0409 > [ 24.510277] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 24.517113] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 24.524400] usb usb1: Product: EHCI Host Controller > [ 24.529323] usb usb1: Manufacturer: Linux 2.6.29-rc3-00697-gae1a25d ehci_hcd > [ 24.536421] usb usb1: SerialNumber: 0000:00:1d.7 > [ 24.541194] usb usb1: uevent > [ 24.544207] usb usb1: usb_probe_device > [ 24.548010] usb usb1: configuration #1 chosen from 1 choice > [ 24.553652] usb usb1: adding 1-0:1.0 (config #1, interface 0) > [ 24.559486] usb 1-0:1.0: uevent > [ 24.562763] hub 1-0:1.0: usb_probe_interface > [ 24.567084] hub 1-0:1.0: usb_probe_interface - got id > [ 24.572191] hub 1-0:1.0: USB hub found > [ 24.576007] hub 1-0:1.0: 8 ports detected > [ 24.580067] hub 1-0:1.0: standalone hub > [ 24.583941] hub 1-0:1.0: no power switching (usb 1.0) > [ 24.589045] hub 1-0:1.0: individual port over-current protection > [ 24.595094] hub 1-0:1.0: power on to power good time: 20ms > [ 24.600644] hub 1-0:1.0: local power source is good > [ 24.605574] hub 1-0:1.0: trying to enable port power on non-switchable hub > [ 24.612772] drivers/usb/core/inode.c: creating file '001' > [ 24.618461] initcall ehci_hcd_init+0x0/0xe9 returned 0 after 248152 usecs > [ 24.625312] calling oxu_module_init+0x0/0x12 @ 1 > [ 24.630158] initcall oxu_module_init+0x0/0x12 returned 0 after 89 usecs > [ 24.636826] calling ohci_hcd_mod_init+0x0/0xb8 @ 1 > [ 24.641777] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 24.648006] ohci_hcd: block sizes: ed 80 td 96 > [ 24.652603] initcall ohci_hcd_mod_init+0x0/0xb8 returned 0 after 10570 usecs > [ 24.659698] calling uhci_hcd_init+0x0/0x10a @ 1 > [ 24.664398] uhci_hcd: USB Universal Host Controller Interface driver > [ 24.671004] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 24.678199] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 24.684100] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 24.689481] drivers/usb/core/inode.c: creating file '002' > [ 24.695068] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > [ 24.702552] uhci_hcd 0000:00:1d.0: detected 2 ports > [ 24.707486] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 > [ 24.714237] uhci_hcd 0000:00:1d.0: Performing full reset > [ 24.719612] uhci_hcd 0000:00:1d.0: supports USB remote wakeup > [ 24.725413] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007000 > [ 24.731260] usb usb2: default language 0x0409 > [ 24.735687] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > [ 24.742524] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 24.749812] usb usb2: Product: UHCI Host Controller > [ 24.754734] usb usb2: Manufacturer: Linux 2.6.29-rc3-00697-gae1a25d uhci_hcd > [ 24.761832] usb usb2: SerialNumber: 0000:00:1d.0 > [ 24.766572] usb usb2: uevent > [ 24.769607] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 > [ 24.775163] usb usb2: usb_probe_device > [ 24.778981] usb usb2: configuration #1 chosen from 1 choice > [ 24.784611] usb usb2: adding 2-0:1.0 (config #1, interface 0) > [ 24.790436] usb 2-0:1.0: uevent > [ 24.793713] hub 2-0:1.0: usb_probe_interface > [ 24.798034] hub 2-0:1.0: usb_probe_interface - got id > [ 24.803162] hub 2-0:1.0: USB hub found > [ 24.806971] hub 2-0:1.0: 2 ports detected > [ 24.811034] hub 2-0:1.0: standalone hub > [ 24.814915] hub 2-0:1.0: no power switching (usb 1.0) > [ 24.820012] hub 2-0:1.0: individual port over-current protection > [ 24.826071] hub 2-0:1.0: power on to power good time: 2ms > [ 24.831528] hub 2-0:1.0: local power source is good > [ 24.836454] hub 2-0:1.0: trying to enable port power on non-switchable hub > [ 24.843518] drivers/usb/core/inode.c: creating file '001' > [ 24.849145] alloc irq_desc for 17 on cpu 0 node 0 > [ 24.852966] alloc kstat_irqs on cpu 0 node 0 > [ 24.858578] IOAPIC[0]: Set routing entry (2-17 -> 0x71 -> IRQ 17 Mode:1 Active:1) > [ 24.866129] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 24.873318] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 24.879197] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 24.884583] drivers/usb/core/inode.c: creating file '003' > [ 24.890162] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > [ 24.897646] uhci_hcd 0000:00:1d.1: detected 2 ports > [ 24.902574] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 > [ 24.909322] uhci_hcd 0000:00:1d.1: Performing full reset > [ 24.914689] uhci_hcd 0000:00:1d.1: supports USB remote wakeup > [ 24.920502] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00007400 > [ 24.926357] usb usb3: default language 0x0409 > [ 24.930786] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 24.937620] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 24.944907] usb usb3: Product: UHCI Host Controller > [ 24.949830] usb usb3: Manufacturer: Linux 2.6.29-rc3-00697-gae1a25d uhci_hcd > [ 24.956934] usb usb3: SerialNumber: 0000:00:1d.1 > [ 24.961673] usb usb3: uevent > [ 24.964712] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 24.970264] usb usb3: usb_probe_device > [ 24.974086] usb usb3: configuration #1 chosen from 1 choice > [ 24.979715] usb usb3: adding 3-0:1.0 (config #1, interface 0) > [ 24.985545] usb 3-0:1.0: uevent > [ 24.988814] hub 3-0:1.0: usb_probe_interface > [ 24.993137] hub 3-0:1.0: usb_probe_interface - got id > [ 24.998256] hub 3-0:1.0: USB hub found > [ 25.002066] hub 3-0:1.0: 2 ports detected > [ 25.006129] hub 3-0:1.0: standalone hub > [ 25.010010] hub 3-0:1.0: no power switching (usb 1.0) > [ 25.015107] hub 3-0:1.0: individual port over-current protection > [ 25.021157] hub 3-0:1.0: power on to power good time: 2ms > [ 25.026616] hub 3-0:1.0: local power source is good > [ 25.031540] hub 3-0:1.0: trying to enable port power on non-switchable hub > [ 25.038608] drivers/usb/core/inode.c: creating file '001' > [ 25.044216] alloc irq_desc for 18 on cpu 0 node 0 > [ 25.048052] alloc kstat_irqs on cpu 0 node 0 > [ 25.053649] IOAPIC[0]: Set routing entry (2-18 -> 0x79 -> IRQ 18 Mode:1 Active:1) > [ 25.061199] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 25.068387] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 25.074267] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 25.079649] drivers/usb/core/inode.c: creating file '004' > [ 25.085231] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > [ 25.092714] uhci_hcd 0000:00:1d.2: detected 2 ports > [ 25.097642] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 > [ 25.104391] uhci_hcd 0000:00:1d.2: Performing full reset > [ 25.109757] uhci_hcd 0000:00:1d.2: supports USB remote wakeup > [ 25.115569] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007800 > [ 25.121420] usb usb4: default language 0x0409 > [ 25.125842] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 25.132680] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 25.139968] usb usb4: Product: UHCI Host Controller > [ 25.144891] usb usb4: Manufacturer: Linux 2.6.29-rc3-00697-gae1a25d uhci_hcd > [ 25.151988] usb usb4: SerialNumber: 0000:00:1d.2 > [ 25.156732] usb usb4: uevent > [ 25.159745] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 25.165300] usb usb4: usb_probe_device > [ 25.169121] usb usb4: configuration #1 chosen from 1 choice > [ 25.174750] usb usb4: adding 4-0:1.0 (config #1, interface 0) > [ 25.180576] usb 4-0:1.0: uevent > [ 25.183840] hub 4-0:1.0: usb_probe_interface > [ 25.188163] hub 4-0:1.0: usb_probe_interface - got id > [ 25.193282] hub 4-0:1.0: USB hub found > [ 25.197092] hub 4-0:1.0: 2 ports detected > [ 25.201168] hub 4-0:1.0: standalone hub > [ 25.205054] hub 4-0:1.0: no power switching (usb 1.0) > [ 25.210149] hub 4-0:1.0: individual port over-current protection > [ 25.216200] hub 4-0:1.0: power on to power good time: 2ms > [ 25.221661] hub 4-0:1.0: local power source is good > [ 25.226592] hub 4-0:1.0: trying to enable port power on non-switchable hub > [ 25.233665] drivers/usb/core/inode.c: creating file '001' > [ 25.239273] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > [ 25.246479] uhci_hcd 0000:00:1d.3: setting latency timer to 64 > [ 25.252360] uhci_hcd 0000:00:1d.3: UHCI Host Controller > [ 25.257745] drivers/usb/core/inode.c: creating file '005' > [ 25.263327] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > [ 25.270813] uhci_hcd 0000:00:1d.3: detected 2 ports > [ 25.275742] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 > [ 25.282491] uhci_hcd 0000:00:1d.3: Performing full reset > [ 25.287858] uhci_hcd 0000:00:1d.3: supports USB remote wakeup > [ 25.293661] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008000 > [ 25.299506] usb usb5: default language 0x0409 > [ 25.303935] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > [ 25.310771] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 25.318059] usb usb5: Product: UHCI Host Controller > [ 25.322981] usb usb5: Manufacturer: Linux 2.6.29-rc3-00697-gae1a25d uhci_hcd > [ 25.330079] usb usb5: SerialNumber: 0000:00:1d.3 > [ 25.334816] usb usb5: uevent > [ 25.337833] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 25.343382] usb usb5: usb_probe_device > [ 25.347550] usb usb5: configuration #1 chosen from 1 choice > [ 25.353177] usb usb5: adding 5-0:1.0 (config #1, interface 0) > [ 25.359008] usb 5-0:1.0: uevent > [ 25.362278] hub 5-0:1.0: usb_probe_interface > [ 25.366601] hub 5-0:1.0: usb_probe_interface - got id > [ 25.371722] hub 5-0:1.0: USB hub found > [ 25.375529] hub 5-0:1.0: 2 ports detected > [ 25.379593] hub 5-0:1.0: standalone hub > [ 25.383474] hub 5-0:1.0: no power switching (usb 1.0) > [ 25.388570] hub 5-0:1.0: individual port over-current protection > [ 25.394621] hub 5-0:1.0: power on to power good time: 2ms > [ 25.400078] hub 5-0:1.0: local power source is good > [ 25.405005] hub 5-0:1.0: trying to enable port power on non-switchable hub > [ 25.412075] drivers/usb/core/inode.c: creating file '001' > [ 25.417794] initcall uhci_hcd_init+0x0/0x10a returned 0 after 735734 usecs > [ 25.424739] calling sl811h_init+0x0/0x42 @ 1 > [ 25.429149] sl811: driver sl811-hcd, 19 May 2005 > [ 25.433906] initcall sl811h_init+0x0/0x42 returned 0 after 4644 usecs > [ 25.440399] calling acm_init+0x0/0x13f @ 1 > [ 25.444749] usbcore: registered new interface driver cdc_acm > [ 25.450488] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters > [ 25.459110] initcall acm_init+0x0/0x13f returned 0 after 14118 usecs > [ 25.465516] calling usb_stor_init+0x0/0x55 @ 1 > [ 25.470099] Initializing USB Mass Storage driver... > [ 25.475135] usbcore: registered new interface driver usb-storage > [ 25.481194] USB Mass Storage support registered. > [ 25.485880] initcall usb_stor_init+0x0/0x55 returned 0 after 15409 usecs > [ 25.492634] calling usb_usual_init+0x0/0x41 @ 1 > [ 25.497406] usbcore: registered new interface driver libusual > [ 25.503212] initcall usb_usual_init+0x0/0x41 returned 0 after 5769 usecs > [ 25.509984] calling usb_mdc800_init+0x0/0x26f @ 1 > [ 25.514932] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 25.520480] usbcore: registered new interface driver mdc800 > [ 25.526117] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera > [ 25.533844] initcall usb_mdc800_init+0x0/0x26f returned 0 after 18568 usecs > [ 25.540854] calling adu_init+0x0/0x9d @ 1 > [ 25.544997] drivers/usb/misc/adutux.c : adu_init : enter > [ 25.550625] usbcore: registered new interface driver adutux > [ 25.556247] adutux adutux (see www.ontrak.net) v0.0.13 > [ 25.561450] adutux is an experimental driver. Use at your own risk > [ 25.567677] drivers/usb/misc/adutux.c : adu_init : leave, return value 0 > [ 25.574604] initcall adu_init+0x0/0x9d returned 0 after 28912 usecs > [ 25.580920] calling emi62_init+0x0/0x3d @ 1 > [ 25.585321] usbcore: registered new interface driver emi62 - firmware loader > [ 25.592425] initcall emi62_init+0x0/0x3d returned 0 after 7018 usecs > [ 25.598840] calling usb_idmouse_init+0x0/0x4d @ 1 > [ 25.603678] idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver > [ 25.609897] usbcore: registered new interface driver idmouse > [ 25.615608] initcall usb_idmouse_init+0x0/0x4d returned 0 after 11648 usecs > [ 25.622629] calling ld_usb_init+0x0/0x3f @ 1 > [ 25.627131] usbcore: registered new interface driver ldusb > [ 25.632672] initcall ld_usb_init+0x0/0x3f returned 0 after 5502 usecs > [ 25.639174] calling usbtest_init+0x0/0x41 @ 1 > [ 25.643757] usbcore: registered new interface driver usbtest > [ 25.649468] initcall usbtest_init+0x0/0x41 returned 0 after 5664 usecs > [ 25.656057] calling tv_init+0x0/0x4d @ 1 > [ 25.660199] usbcore: registered new interface driver trancevibrator > [ 25.666513] trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver > [ 25.673018] initcall tv_init+0x0/0x4d returned 0 after 12598 usecs > [ 25.679244] calling uss720_init+0x0/0x67 @ 1 > [ 25.683745] usbcore: registered new interface driver uss720 > [ 25.689367] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip > [ 25.698772] uss720: NOTE: this is a special purpose driver to allow nonstandard > [ 25.706143] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables > [ 25.713432] uss720: If you just want to connect to a printer, use usblp instead > [ 25.720810] initcall uss720_init+0x0/0x67 returned 0 after 36283 usecs > [ 25.727387] calling usb_sevseg_init+0x0/0x3f @ 1 > [ 25.732237] usbcore: registered new interface driver usbsevseg > [ 25.738119] initcall usb_sevseg_init+0x0/0x3f returned 0 after 5833 usecs > [ 25.744967] calling vstusb_init+0x0/0x46 @ 1 > [ 25.749458] usbcore: registered new interface driver vstusb > [ 25.755081] initcall vstusb_init+0x0/0x46 returned 0 after 5571 usecs > [ 25.761582] calling usb_sisusb_init+0x0/0x1e @ 1 > [ 25.766418] usbcore: registered new interface driver sisusb > [ 25.772041] initcall usb_sisusb_init+0x0/0x1e returned 0 after 5571 usecs > [ 25.778890] calling i8042_init+0x0/0x413 @ 1 > [ 25.783652] PNP: No PS/2 controller found. Probing ports directly. > [ 25.792234] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 25.797252] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 25.802358] initcall i8042_init+0x0/0x413 returned 0 after 18613 usecs > [ 25.808932] calling serio_raw_init+0x0/0x1d @ 1 > [ 25.813823] initcall serio_raw_init+0x0/0x1d returned 0 after 213 usecs > [ 25.820486] calling l4_init+0x0/0x3e0 @ 1 > [ 25.824684] initcall l4_init+0x0/0x3e0 returned -19 after 8 usecs > [ 25.830823] calling ns558_init+0x0/0x360 @ 1 > [ 25.848215] initcall ns558_init+0x0/0x360 returned 0 after 12674 usecs > [ 25.854795] calling mousedev_init+0x0/0x92 @ 1 > [ 25.859647] mice: PS/2 mouse device common for all mice > [ 25.864929] initcall mousedev_init+0x0/0x92 returned 0 after 5417 usecs > [ 25.871618] calling atkbd_init+0x0/0x27 @ 1 > [ 25.876040] initcall atkbd_init+0x0/0x27 returned 0 after 94 usecs > [ 25.882298] calling lkkbd_init+0x0/0x1b @ 1 > [ 25.886733] initcall lkkbd_init+0x0/0x1b returned 0 after 108 usecs > [ 25.893051] calling xtkbd_init+0x0/0x1d @ 1 > [ 25.897482] initcall xtkbd_init+0x0/0x1d returned 0 after 89 usecs > [ 25.903710] calling atp_init+0x0/0x1b @ 1 > [ 25.908127] usbcore: registered new interface driver appletouch > [ 25.914109] initcall atp_init+0x0/0x1b returned 0 after 6083 usecs > [ 25.920347] calling sermouse_init+0x0/0x25 @ 1 > [ 25.925074] initcall sermouse_init+0x0/0x25 returned 0 after 142 usecs > [ 25.931652] calling gpio_mouse_init+0x0/0x19 @ 1 > [ 25.936616] initcall gpio_mouse_init+0x0/0x19 returned -19 after 180 usecs > [ 25.943543] calling gf2k_init+0x0/0x1b @ 1 > [ 25.947787] usb usb2: suspend_rh (auto-stop) > [ 25.952239] initcall gf2k_init+0x0/0x1b returned 0 after 86 usecs > [ 25.958381] calling grip_init+0x0/0x1b @ 1 > [ 25.962731] initcall grip_init+0x0/0x1b returned 0 after 87 usecs > [ 25.968877] calling guillemot_init+0x0/0x1b @ 1 > [ 25.973650] initcall guillemot_init+0x0/0x1b returned 0 after 86 usecs > [ 25.980229] calling magellan_init+0x0/0x1b @ 1 > [ 25.984923] initcall magellan_init+0x0/0x1b returned 0 after 91 usecs > [ 25.991417] calling spaceorb_init+0x0/0x1b @ 1 > [ 25.996118] initcall spaceorb_init+0x0/0x1b returned 0 after 95 usecs > [ 26.002608] calling twidjoy_init+0x0/0x1b @ 1 > [ 26.007209] initcall twidjoy_init+0x0/0x1b returned 0 after 87 usecs > [ 26.013614] calling ati_remote_init+0x0/0x4d @ 1 > [ 26.018479] usbcore: registered new interface driver ati_remote > [ 26.024448] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control > [ 26.030085] initcall ati_remote_init+0x0/0x4d returned 0 after 11425 usecs > [ 26.037014] calling ati_remote2_init+0x0/0x4d @ 1 > [ 26.041957] usbcore: registered new interface driver ati_remote2 > [ 26.048012] ati_remote2: ATI/Philips USB RF remote driver 0.3 > [ 26.053824] initcall ati_remote2_init+0x0/0x4d returned 0 after 11684 usecs > [ 26.060838] calling usb_keyspan_init+0x0/0x3f @ 1 > [ 26.065780] usbcore: registered new interface driver keyspan_remote > [ 26.072099] initcall usb_keyspan_init+0x0/0x3f returned 0 after 6266 usecs > [ 26.079035] calling yealink_dev_init+0x0/0x3d @ 1 > [ 26.083957] usbcore: registered new interface driver yealink > [ 26.089663] yealink: yld-20051230:Yealink phone driver > [ 26.094868] initcall yealink_dev_init+0x0/0x3d returned 0 after 10735 usecs > [ 26.101883] calling pcf50633_input_init+0x0/0x1f @ 1 > [ 26.107072] initcall pcf50633_input_init+0x0/0x1f returned 0 after 81 usecs > [ 26.114086] calling i2o_iop_init+0x0/0x62 @ 1 > [ 26.118596] I2O subsystem v1.325 > [ 26.121875] i2o: max drivers = 8 > [ 26.125476] initcall i2o_iop_init+0x0/0x62 returned 0 after 6716 usecs > [ 26.132052] calling i2o_bus_init+0x0/0x49 @ 1 > [ 26.136561] I2O Bus Adapter OSM v1.317 > [ 26.140445] initcall i2o_bus_init+0x0/0x49 returned 0 after 3790 usecs > [ 26.147019] calling i2o_block_init+0x0/0x128 @ 1 > [ 26.151806] I2O Block Device OSM v1.325 > [ 26.156322] initcall i2o_block_init+0x0/0x128 returned 0 after 4407 usecs > [ 26.163170] calling ds1742_init+0x0/0x12 @ 1 > [ 26.167660] initcall ds1742_init+0x0/0x12 returned 0 after 81 usecs > [ 26.173982] calling fm3130_init+0x0/0x14 @ 1 > [ 26.178494] i2c-core: driver [rtc-fm3130] registered > [ 26.183517] initcall fm3130_init+0x0/0x14 returned 0 after 4988 usecs > [ 26.190029] calling isl1208_init+0x0/0x14 @ 1 > [ 26.194525] usb usb3: suspend_rh (auto-stop) > [ 26.198956] i2c-core: driver [rtc-isl1208] registered > [ 26.204057] initcall isl1208_init+0x0/0x14 returned 0 after 5064 usecs > [ 26.210647] calling m41t80_rtc_init+0x0/0x14 @ 1 > [ 26.215479] i2c-core: driver [rtc-m41t80] registered > [ 26.220497] initcall m41t80_rtc_init+0x0/0x14 returned 0 after 4978 usecs > [ 26.227348] calling m48t59_rtc_init+0x0/0x12 @ 1 > [ 26.232184] initcall m48t59_rtc_init+0x0/0x12 returned 0 after 81 usecs > [ 26.238852] calling m48t86_rtc_init+0x0/0x12 @ 1 > [ 26.243711] initcall m48t86_rtc_init+0x0/0x12 returned 0 after 86 usecs > [ 26.250379] calling bq4802_init+0x0/0x12 @ 1 > [ 26.254910] initcall bq4802_init+0x0/0x12 returned 0 after 104 usecs > [ 26.261316] calling max6900_init+0x0/0x14 @ 1 > [ 26.265918] i2c-core: driver [rtc-max6900] registered > [ 26.271022] initcall max6900_init+0x0/0x14 returned 0 after 5075 usecs > [ 26.277613] calling rx8581_init+0x0/0x14 @ 1 > [ 26.282109] i2c-core: driver [rtc-rx8581] registered > [ 26.287126] initcall rx8581_init+0x0/0x14 returned 0 after 4985 usecs > [ 26.293629] calling s35390a_rtc_init+0x0/0x14 @ 1 > [ 26.298559] i2c-core: driver [rtc-s35390a] registered > [ 26.303661] initcall s35390a_rtc_init+0x0/0x14 returned 0 after 5069 usecs > [ 26.310598] calling v3020_init+0x0/0x12 @ 1 > [ 26.315002] initcall v3020_init+0x0/0x12 returned 0 after 80 usecs > [ 26.321237] calling pcf50633_rtc_init+0x0/0x12 @ 1 > [ 26.326264] initcall pcf50633_rtc_init+0x0/0x12 returned 0 after 80 usecs > [ 26.333101] calling i2c_dev_init+0x0/0xac @ 1 > [ 26.337956] i2c /dev entries driver > [ 26.341670] i2c-core: driver [dev_driver] registered > [ 26.346847] i2c-dev: adapter [via_i2c] registered as minor 0 > [ 26.352573] initcall i2c_dev_init+0x0/0xac returned 0 after 14271 usecs > [ 26.359239] calling i2c_amd8111_init+0x0/0x1b @ 1 > [ 26.364190] initcall i2c_amd8111_init+0x0/0x1b returned 0 after 102 usecs > [ 26.371027] calling i2c_sch_init+0x0/0x1b @ 1 > [ 26.375637] initcall i2c_sch_init+0x0/0x1b returned 0 after 88 usecs > [ 26.382042] calling i2c_piix4_init+0x0/0x1b @ 1 > [ 26.386827] initcall i2c_piix4_init+0x0/0x1b returned 0 after 89 usecs > [ 26.393404] calling i2c_sis96x_init+0x0/0x1b @ 1 > [ 26.398268] initcall i2c_sis96x_init+0x0/0x1b returned 0 after 87 usecs > [ 26.404930] calling i2c_vt586b_init+0x0/0x1b @ 1 > [ 26.409791] initcall i2c_vt586b_init+0x0/0x1b returned 0 after 87 usecs > [ 26.416457] calling ocores_i2c_init+0x0/0x12 @ 1 > [ 26.421317] initcall ocores_i2c_init+0x0/0x12 returned 0 after 85 usecs > [ 26.427983] calling usb_i2c_tiny_usb_init+0x0/0x1b @ 1 > [ 26.433363] usbcore: registered new interface driver i2c-tiny-usb > [ 26.439513] initcall usb_i2c_tiny_usb_init+0x0/0x1b returned 0 after 6092 usecs > [ 26.446890] usb usb4: suspend_rh (auto-stop) > [ 26.451225] usb usb5: suspend_rh (auto-stop) > [ 26.455568] calling i2c_voodoo3_init+0x0/0x1b @ 1 > [ 26.460504] initcall i2c_voodoo3_init+0x0/0x1b returned 0 after 86 usecs > [ 26.467252] calling ds1682_init+0x0/0x14 @ 1 > [ 26.471757] i2c-core: driver [ds1682] registered > [ 26.476423] initcall ds1682_init+0x0/0x14 returned 0 after 4635 usecs > [ 26.482925] calling max6875_init+0x0/0x14 @ 1 > [ 26.487504] i2c-core: driver [max6875] registered > [ 26.492263] initcall max6875_init+0x0/0x14 returned 0 after 4729 usecs > [ 26.498855] calling pcf8574_init+0x0/0x14 @ 1 > [ 26.503428] i2c-core: driver [pcf8574] registered > [ 26.508191] initcall pcf8574_init+0x0/0x14 returned 0 after 4729 usecs > [ 26.514784] calling pcf8591_init+0x0/0x46 @ 1 > [ 26.519362] i2c-core: driver [pcf8591] registered > [ 26.524121] initcall pcf8591_init+0x0/0x46 returned 0 after 4729 usecs > [ 26.530713] calling sensors_w83792d_init+0x0/0x14 @ 1 > [ 26.535981] i2c-core: driver [w83792d] registered > [ 26.540743] initcall sensors_w83792d_init+0x0/0x14 returned 0 after 4727 usecs > [ 26.548046] calling sensors_w83781d_init+0x0/0x18 @ 1 > [ 26.553315] i2c-core: driver [w83781d] registered > [ 26.558077] initcall sensors_w83781d_init+0x0/0x18 returned 0 after 4728 usecs > [ 26.565380] calling abituguru_init+0x0/0x1b2 @ 1 > [ 26.570136] initcall abituguru_init+0x0/0x1b2 returned -19 after 0 usecs > [ 26.576885] calling ad7418_init+0x0/0x14 @ 1 > [ 26.581369] i2c-core: driver [ad7418] registered > [ 26.586039] initcall ad7418_init+0x0/0x14 returned 0 after 4639 usecs > [ 26.592543] calling sensors_adm1025_init+0x0/0x14 @ 1 > [ 26.597809] i2c-core: driver [adm1025] registered > [ 26.602571] initcall sensors_adm1025_init+0x0/0x14 returned 0 after 4728 usecs > [ 26.609876] calling sensors_adm1029_init+0x0/0x14 @ 1 > [ 26.615142] i2c-core: driver [adm1029] registered > [ 26.619904] initcall sensors_adm1029_init+0x0/0x14 returned 0 after 4728 usecs > [ 26.627209] calling sensors_adm1031_init+0x0/0x14 @ 1 > [ 26.632480] i2c-core: driver [adm1031] registered > [ 26.637238] initcall sensors_adm1031_init+0x0/0x14 returned 0 after 4729 usecs > [ 26.644541] calling sensors_adm9240_init+0x0/0x1e @ 1 > [ 26.649809] i2c-core: driver [adm9240] registered > [ 26.654572] initcall sensors_adm9240_init+0x0/0x1e returned 0 after 4728 usecs > [ 26.661875] calling applesmc_init+0x0/0x600 @ 1 > [ 26.666547] applesmc: supported laptop not found! > [ 26.671299] applesmc: driver init failed (ret=-19)! > [ 26.676223] initcall applesmc_init+0x0/0x600 returned -19 after 9452 usecs > [ 26.683146] calling coretemp_init+0x0/0x210 @ 1 > [ 26.687989] initcall coretemp_init+0x0/0x210 returned -19 after 165 usecs > [ 26.694831] calling dme1737_init+0x0/0x19f @ 1 > [ 26.699508] i2c-core: driver [dme1737] registered > [ 26.704276] initcall dme1737_init+0x0/0x19f returned 0 after 4735 usecs > [ 26.710963] calling f71805f_init+0x0/0x171 @ 1 > [ 26.715559] initcall f71805f_init+0x0/0x171 returned -19 after 15 usecs > [ 26.722225] calling sensors_fscher_init+0x0/0x14 @ 1 > [ 26.727413] i2c-core: driver [fscher] registered > [ 26.732086] initcall sensors_fscher_init+0x0/0x14 returned 0 after 4643 usecs > [ 26.739286] calling fschmd_init+0x0/0x14 @ 1 > [ 26.743774] i2c-core: driver [fschmd] registered > [ 26.748449] initcall fschmd_init+0x0/0x14 returned 0 after 4643 usecs > [ 26.754957] calling sm_fscpos_init+0x0/0x14 @ 1 > [ 26.759703] i2c-core: driver [fscpos] registered > [ 26.764378] initcall sm_fscpos_init+0x0/0x14 returned 0 after 4644 usecs > [ 26.771144] calling sensors_gl520sm_init+0x0/0x14 @ 1 > [ 26.776412] i2c-core: driver [gl520sm] registered > [ 26.781173] initcall sensors_gl520sm_init+0x0/0x14 returned 0 after 4727 usecs > [ 26.788479] calling i5k_amb_init+0x0/0x6b @ 1 > [ 26.793197] initcall i5k_amb_init+0x0/0x6b returned 0 after 220 usecs > [ 26.799689] calling lis3lv02d_init_module+0x0/0x37 @ 1 > [ 26.805088] lis3lv02d driver loaded. > [ 26.808720] initcall lis3lv02d_init_module+0x0/0x37 returned 0 after 3653 usecs > [ 26.816119] calling sensors_lm63_init+0x0/0x1f @ 1 > [ 26.821130] hub 1-0:1.0: hub_suspend > [ 26.824766] usb usb1: bus auto-suspend > [ 26.828578] ehci_hcd 0000:00:1d.7: suspend root hub > [ 26.833532] i2c-core: driver [lm63] registered > [ 26.838036] initcall sensors_lm63_init+0x0/0x1f returned 0 after 16584 usecs > [ 26.845152] calling sm_lm78_init+0x0/0x403 @ 1 > [ 26.849846] i2c-core: driver [lm78] registered > [ 26.854347] initcall sm_lm78_init+0x0/0x403 returned 0 after 4509 usecs > [ 26.861017] calling sensors_lm83_init+0x0/0x14 @ 1 > [ 26.866026] i2c-core: driver [lm83] registered > [ 26.870528] initcall sensors_lm83_init+0x0/0x14 returned 0 after 4475 usecs > [ 26.877555] calling sensors_lm87_init+0x0/0x14 @ 1 > [ 26.882564] i2c-core: driver [lm87] registered > [ 26.887063] initcall sensors_lm87_init+0x0/0x14 returned 0 after 4474 usecs > [ 26.894087] calling sensors_lm90_init+0x0/0x14 @ 1 > [ 26.899098] i2c-core: driver [lm90] registered > [ 26.903600] initcall sensors_lm90_init+0x0/0x14 returned 0 after 4474 usecs > [ 26.910626] calling sensors_max1619_init+0x0/0x14 @ 1 > [ 26.915894] i2c-core: driver [max1619] registered > [ 26.920656] initcall sensors_max1619_init+0x0/0x14 returned 0 after 4728 usecs > [ 26.927958] calling pc87360_init+0x0/0x1bf @ 1 > [ 26.932549] pc87360: PC8736x not detected, module not inserted. > [ 26.938520] initcall pc87360_init+0x0/0x1bf returned -19 after 5838 usecs > [ 26.945357] calling sm_sis5595_init+0x0/0x1b @ 1 > [ 26.950207] initcall sm_sis5595_init+0x0/0x1b returned 0 after 97 usecs > [ 26.956868] calling sm_thmc50_init+0x0/0x14 @ 1 > [ 26.961632] i2c-core: driver [thmc50] registered > [ 26.966311] initcall sm_thmc50_init+0x0/0x14 returned 0 after 4647 usecs > [ 26.973077] calling sm_via686a_init+0x0/0x1b @ 1 > [ 26.977923] initcall sm_via686a_init+0x0/0x1b returned 0 after 89 usecs > [ 26.984592] calling sm_vt8231_init+0x0/0x1b @ 1 > [ 26.989376] initcall sm_vt8231_init+0x0/0x1b returned 0 after 97 usecs > [ 26.995954] calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 > [ 27.001681] initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 1 usecs > [ 27.009230] calling cpufreq_gov_dbs_init+0x0/0x12 @ 1 > [ 27.014423] initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 usecs > [ 27.021433] calling init_ladder+0x0/0x12 @ 1 > [ 27.025837] cpuidle: using governor ladder > [ 27.029987] initcall init_ladder+0x0/0x12 returned 0 after 4053 usecs > [ 27.036478] calling init_menu+0x0/0x12 @ 1 > [ 27.040716] cpuidle: using governor menu > [ 27.044686] initcall init_menu+0x0/0x12 returned 0 after 3876 usecs > [ 27.051003] calling alix_led_init+0x0/0x108 @ 1 > [ 27.057342] initcall alix_led_init+0x0/0x108 returned -19 after 1636 usecs > [ 27.064264] calling pca955x_leds_init+0x0/0x14 @ 1 > [ 27.069278] i2c-core: driver [leds-pca955x] registered > [ 27.074467] initcall pca955x_leds_init+0x0/0x14 returned 0 after 5147 usecs > [ 27.081490] calling dcdrbu_init+0x0/0x13e @ 1 > [ 27.086088] initcall dcdrbu_init+0x0/0x13e returned 0 after 101 usecs > [ 27.092578] calling compal_init+0x0/0x120 @ 1 > [ 27.097092] initcall compal_init+0x0/0x120 returned -19 after 2 usecs > [ 27.103584] calling acer_wmi_init+0x0/0x6ca @ 1 > [ 27.108255] acer-wmi: Acer Laptop ACPI-WMI Extras > [ 27.113013] acer-wmi: No or unsupported WMI interface, unable to load > [ 27.119506] initcall acer_wmi_init+0x0/0x6ca returned -19 after 10986 usecs > [ 27.126517] calling sony_laptop_init+0x0/0x86 @ 1 > [ 27.131443] initcall sony_laptop_init+0x0/0x86 returned 0 after 87 usecs > [ 27.138192] calling thinkpad_acpi_module_init+0x0/0xa4b @ 1 > [ 27.143961] initcall thinkpad_acpi_module_init+0x0/0xa4b returned -19 after 44 usecs > [ 27.151772] calling init_soundcore+0x0/0x80 @ 1 > [ 27.156531] initcall init_soundcore+0x0/0x80 returned 0 after 85 usecs > [ 27.163108] calling alsa_sound_init+0x0/0x8d @ 1 > [ 27.167929] Advanced Linux Sound Architecture Driver Version 1.0.18a. > [ 27.174418] initcall alsa_sound_init+0x0/0x8d returned 0 after 6385 usecs > [ 27.181255] calling alsa_hwdep_init+0x0/0x70 @ 1 > [ 27.186023] initcall alsa_hwdep_init+0x0/0x70 returned 0 after 8 usecs > [ 27.192600] calling alsa_timer_init+0x0/0x212 @ 1 > [ 27.197628] initcall alsa_timer_init+0x0/0x212 returned 0 after 178 usecs > [ 27.204464] calling snd_hrtimer_init+0x0/0x196 @ 1 > [ 27.209413] initcall snd_hrtimer_init+0x0/0x196 returned 0 after 3 usecs > [ 27.216165] calling alsa_pcm_init+0x0/0x71 @ 1 > [ 27.220758] initcall alsa_pcm_init+0x0/0x71 returned 0 after 7 usecs > [ 27.227163] calling snd_mem_init+0x0/0x2c @ 1 > [ 27.231668] initcall snd_mem_init+0x0/0x2c returned 0 after 6 usecs > [ 27.237988] calling alsa_rawmidi_init+0x0/0x89 @ 1 > [ 27.242922] initcall alsa_rawmidi_init+0x0/0x89 returned 0 after 2 usecs > [ 27.249669] calling alsa_opl3_init+0x0/0x8 @ 1 > [ 27.254246] initcall alsa_opl3_init+0x0/0x8 returned 0 after 0 usecs > [ 27.260650] calling alsa_mpu401_uart_init+0x0/0x8 @ 1 > [ 27.265842] initcall alsa_mpu401_uart_init+0x0/0x8 returned 0 after 0 usecs > [ 27.272852] calling alsa_sb_common_init+0x0/0x8 @ 1 > [ 27.278210] initcall alsa_sb_common_init+0x0/0x8 returned 0 after 0 usecs > [ 27.285046] calling alsa_card_als300_init+0x0/0x1b @ 1 > [ 27.290422] initcall alsa_card_als300_init+0x0/0x1b returned 0 after 94 usecs > [ 27.297606] calling alsa_card_als4000_init+0x0/0x1b @ 1 > [ 27.303087] initcall alsa_card_als4000_init+0x0/0x1b returned 0 after 100 usecs > [ 27.310467] calling alsa_card_atiixp_init+0x0/0x1b @ 1 > [ 27.315864] initcall alsa_card_atiixp_init+0x0/0x1b returned 0 after 103 usecs > [ 27.323155] calling alsa_card_bt87x_init+0x0/0x30 @ 1 > [ 27.328459] initcall alsa_card_bt87x_init+0x0/0x30 returned 0 after 96 usecs > [ 27.335558] calling alsa_card_cmipci_init+0x0/0x1b @ 1 > [ 27.340947] initcall alsa_card_cmipci_init+0x0/0x1b returned 0 after 96 usecs > [ 27.348133] calling alsa_card_ens137x_init+0x0/0x1b @ 1 > [ 27.353609] initcall alsa_card_ens137x_init+0x0/0x1b returned 0 after 95 usecs > [ 27.360900] calling alsa_card_es1968_init+0x0/0x1b @ 1 > [ 27.366291] initcall alsa_card_es1968_init+0x0/0x1b returned 0 after 98 usecs > [ 27.373474] calling alsa_card_m3_init+0x0/0x1b @ 1 > [ 27.378517] initcall alsa_card_m3_init+0x0/0x1b returned 0 after 95 usecs > [ 27.385356] calling alsa_card_via82xx_init+0x0/0x1b @ 1 > [ 27.390832] initcall alsa_card_via82xx_init+0x0/0x1b returned 0 after 95 usecs > [ 27.398122] calling alsa_ac97_init+0x0/0x8 @ 1 > [ 27.402720] initcall alsa_ac97_init+0x0/0x8 returned 0 after 0 usecs > [ 27.409119] calling alsa_card_ali_init+0x0/0x1b @ 1 > [ 27.414247] initcall alsa_card_ali_init+0x0/0x1b returned 0 after 105 usecs > [ 27.421262] calling alsa_card_aw2_init+0x0/0x29 @ 1 > [ 27.426291] aw2: Load aw2 module > [ 27.429671] initcall alsa_card_aw2_init+0x0/0x29 returned 0 after 3299 usecs > [ 27.436766] calling alsa_card_echo_init+0x0/0x1b @ 1 > [ 27.441985] initcall alsa_card_echo_init+0x0/0x1b returned 0 after 98 usecs > [ 27.448995] calling alsa_card_echo_init+0x0/0x1b @ 1 > [ 27.454215] initcall alsa_card_echo_init+0x0/0x1b returned 0 after 99 usecs > [ 27.461224] calling alsa_card_echo_init+0x0/0x1b @ 1 > [ 27.466439] initcall alsa_card_echo_init+0x0/0x1b returned 0 after 95 usecs > [ 27.473453] calling alsa_card_echo_init+0x0/0x1b @ 1 > [ 27.478675] initcall alsa_card_echo_init+0x0/0x1b returned 0 after 102 usecs > [ 27.485777] calling alsa_card_echo_init+0x0/0x1b @ 1 > [ 27.490996] initcall alsa_card_echo_init+0x0/0x1b returned 0 after 99 usecs > [ 27.498005] calling alsa_card_hifier_init+0x0/0x1b @ 1 > [ 27.503393] initcall alsa_card_hifier_init+0x0/0x1b returned 0 after 94 usecs > [ 27.510580] calling alsa_card_xonar_init+0x0/0x1b @ 1 > [ 27.515889] initcall alsa_card_xonar_init+0x0/0x1b returned 0 after 101 usecs > [ 27.523078] calling alsa_card_hammerfall_init+0x0/0x1b @ 1 > [ 27.528814] initcall alsa_card_hammerfall_init+0x0/0x1b returned 0 after 95 usecs > [ 27.536364] calling alsa_card_hdsp_init+0x0/0x1b @ 1 > [ 27.541584] initcall alsa_card_hdsp_init+0x0/0x1b returned 0 after 99 usecs > [ 27.548592] calling snd_us122l_module_init+0x0/0x1b @ 1 > [ 27.554067] usbcore: registered new interface driver snd-usb-us122l > [ 27.560390] initcall snd_us122l_module_init+0x0/0x1b returned 0 after 6270 usecs > [ 27.567862] calling alsa_sound_last_init+0x0/0x86 @ 1 > [ 27.573049] ALSA device list: > [ 27.576063] No soundcards found. > [ 27.579508] initcall alsa_sound_last_init+0x0/0x86 returned 0 after 6308 usecs > [ 27.586795] calling flow_cache_init+0x0/0x12e @ 1 > [ 27.591821] initcall flow_cache_init+0x0/0x12e returned 0 after 176 usecs > [ 27.598660] calling pg_init+0x0/0x2ad @ 1 > [ 27.602823] pktgen v2.70: Packet Generator for packet performance testing. > [ 27.609798] initcall pg_init+0x0/0x2ad returned 0 after 6810 usecs > [ 27.616028] calling llc_init+0x0/0x20 @ 1 > [ 27.620193] initcall llc_init+0x0/0x20 returned 0 after 1 usecs > [ 27.626159] calling llc2_init+0x0/0xd2 @ 1 > [ 27.630435] NET: Registered protocol family 26 > [ 27.634931] initcall llc2_init+0x0/0xd2 returned 0 after 4427 usecs > [ 27.641248] calling snap_init+0x0/0x33 @ 1 > [ 27.645487] initcall snap_init+0x0/0x33 returned 0 after 1 usecs > [ 27.651542] calling blackhole_module_init+0x0/0x12 @ 1 > [ 27.656815] initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs > [ 27.663910] calling hfsc_init+0x0/0x12 @ 1 > [ 27.668141] initcall hfsc_init+0x0/0x12 returned 0 after 0 usecs > [ 27.674197] calling prio_module_init+0x0/0x12 @ 1 > [ 27.679034] initcall prio_module_init+0x0/0x12 returned 0 after 0 usecs > [ 27.685699] calling init_route4+0x0/0x12 @ 1 > [ 27.690111] initcall init_route4+0x0/0x12 returned 0 after 0 usecs > [ 27.696342] calling init_basic+0x0/0x12 @ 1 > [ 27.700667] initcall init_basic+0x0/0x12 returned 0 after 0 usecs > [ 27.706810] calling cls_flow_init+0x0/0x12 @ 1 > [ 27.711397] initcall cls_flow_init+0x0/0x12 returned 0 after 0 usecs > [ 27.717800] calling init_em_nbyte+0x0/0x12 @ 1 > [ 27.722385] initcall init_em_nbyte+0x0/0x12 returned 0 after 0 usecs > [ 27.728789] calling sysctl_ipv4_init+0x0/0x53 @ 1 > [ 27.733659] initcall sysctl_ipv4_init+0x0/0x53 returned 0 after 23 usecs > [ 27.740412] calling tunnel4_init+0x0/0x6f @ 1 > [ 27.744911] initcall tunnel4_init+0x0/0x6f returned 0 after 1 usecs > [ 27.751228] calling xfrm4_mode_tunnel_init+0x0/0x19 @ 1 > [ 27.756595] initcall xfrm4_mode_tunnel_init+0x0/0x19 returned 0 after 1 usecs > [ 27.763776] calling inet_diag_init+0x0/0x6b @ 1 > [ 27.768455] initcall inet_diag_init+0x0/0x6b returned 0 after 15 usecs > [ 27.775035] calling tcp_diag_init+0x0/0x12 @ 1 > [ 27.779621] initcall tcp_diag_init+0x0/0x12 returned 0 after 1 usecs > [ 27.786023] calling cubictcp_register+0x0/0x6f @ 1 > [ 27.790955] TCP cubic registered > [ 27.794231] initcall cubictcp_register+0x0/0x6f returned 0 after 3199 usecs > [ 27.801242] calling inet6_init+0x0/0x2b2 @ 1 > [ 27.806489] NET: Registered protocol family 10 > [ 27.811655] lo: Disabled Privacy Extensions > [ 27.816037] initcall inet6_init+0x0/0x2b2 returned 0 after 10138 usecs > [ 27.822616] calling esp6_init+0x0/0x6f @ 1 > [ 27.826855] initcall esp6_init+0x0/0x6f returned 0 after 0 usecs > [ 27.832911] calling ipcomp6_init+0x0/0x6f @ 1 > [ 27.837411] initcall ipcomp6_init+0x0/0x6f returned 0 after 1 usecs > [ 27.843727] calling xfrm6_tunnel_init+0x0/0xf5 @ 1 > [ 27.848758] hub 2-0:1.0: hub_suspend > [ 27.852388] usb usb2: bus auto-suspend > [ 27.856247] usb usb2: suspend_rh > [ 27.859532] hub 3-0:1.0: hub_suspend > [ 27.863157] usb usb3: bus auto-suspend > [ 27.866962] usb usb3: suspend_rh > [ 27.870249] hub 4-0:1.0: hub_suspend > [ 27.873878] usb usb4: bus auto-suspend > [ 27.877681] usb usb4: suspend_rh > [ 27.880969] hub 5-0:1.0: hub_suspend > [ 27.884598] usb usb5: bus auto-suspend > [ 27.888393] usb usb5: suspend_rh > [ 27.891736] initcall xfrm6_tunnel_init+0x0/0xf5 returned 0 after 42068 usecs > [ 27.898839] calling tunnel6_init+0x0/0x6f @ 1 > [ 27.903366] initcall tunnel6_init+0x0/0x6f returned 0 after 0 usecs > [ 27.909681] calling xfrm6_mode_tunnel_init+0x0/0x17 @ 1 > [ 27.915046] initcall xfrm6_mode_tunnel_init+0x0/0x17 returned 0 after 0 usecs > [ 27.922229] calling xfrm6_ro_init+0x0/0x17 @ 1 > [ 27.926814] initcall xfrm6_ro_init+0x0/0x17 returned 0 after 0 usecs > [ 27.933219] calling sit_init+0x0/0x76 @ 1 > [ 27.937369] IPv6 over IPv4 tunneling driver > [ 27.941843] sit0: Disabled Privacy Extensions > [ 27.946284] initcall sit_init+0x0/0x76 returned 0 after 8704 usecs > [ 27.952534] calling packet_init+0x0/0x4a @ 1 > [ 27.956938] NET: Registered protocol family 17 > [ 27.961436] initcall packet_init+0x0/0x4a returned 0 after 4390 usecs > [ 27.967928] calling br_init+0x0/0xc6 @ 1 > [ 27.972180] initcall br_init+0x0/0xc6 returned 0 after 182 usecs > [ 27.978233] calling can_init+0x0/0xf6 @ 1 > [ 27.982393] can: controller area network core (rev 20090105 abi 8) > [ 27.988819] NET: Registered protocol family 29 > [ 27.993316] initcall can_init+0x0/0xf6 returned 0 after 10665 usecs > [ 27.999648] calling bcm_module_init+0x0/0x6d @ 1 > [ 28.004406] can: broadcast manager protocol (rev 20090105 t) > [ 28.010124] initcall bcm_module_init+0x0/0x6d returned 0 after 5582 usecs > [ 28.016965] calling af_rxrpc_init+0x0/0x1a5 @ 1 > [ 28.021940] NET: Registered protocol family 33 > [ 28.026450] initcall af_rxrpc_init+0x0/0x1a5 returned 0 after 4700 usecs > [ 28.033212] calling econet_proto_init+0x0/0x53 @ 1 > [ 28.038137] NET: Registered protocol family 19 > [ 28.042637] initcall econet_proto_init+0x0/0x53 returned 0 after 4393 usecs > [ 28.049647] calling sctp_init+0x0/0x7e3 @ 1 > [ 28.054857] SCTP: Hash tables configured (established 65536 bind 65536) > [ 28.096178] sctp_init_sock(sk: ffff88007d804000) > [ 28.100868] initcall sctp_init+0x0/0x7e3 returned 0 after 45793 usecs > [ 28.107361] calling lib80211_init+0x0/0x20 @ 1 > [ 28.111942] lib80211: common routines for IEEE802.11 drivers > [ 28.117655] lib80211_crypt: registered algorithm 'NULL' > [ 28.122932] initcall lib80211_init+0x0/0x20 returned 0 after 10731 usecs > [ 28.129683] calling lib80211_crypto_wep_init+0x0/0x12 @ 1 > [ 28.135222] lib80211_crypt: registered algorithm 'WEP' > [ 28.140413] initcall lib80211_crypto_wep_init+0x0/0x12 returned 0 after 5068 usecs > [ 28.148048] calling lib80211_crypto_ccmp_init+0x0/0x12 @ 1 > [ 28.153674] lib80211_crypt: registered algorithm 'CCMP' > [ 28.158952] initcall lib80211_crypto_ccmp_init+0x0/0x12 returned 0 after 5154 usecs > [ 28.166673] calling lib80211_crypto_tkip_init+0x0/0x12 @ 1 > [ 28.172297] lib80211_crypt: registered algorithm 'TKIP' > [ 28.177577] initcall lib80211_crypto_tkip_init+0x0/0x12 returned 0 after 5155 usecs > [ 28.185297] calling tipc_init+0x0/0xc9 @ 1 > [ 28.189529] TIPC: Activated (version 1.6.4 compiled Feb 8 2009 06:54:12) > [ 28.196865] NET: Registered protocol family 30 > [ 28.201357] TIPC: Started in single node mode > [ 28.205780] initcall tipc_init+0x0/0xc9 returned 0 after 15870 usecs > [ 28.212183] calling rfkill_handler_init+0x0/0x49 @ 1 > [ 28.217291] initcall rfkill_handler_init+0x0/0x49 returned 0 after 3 usecs > [ 28.224210] calling dcbnl_init+0x0/0x32 @ 1 > [ 28.228527] initcall dcbnl_init+0x0/0x32 returned 0 after 1 usecs > [ 28.234674] calling hpet_insert_resource+0x0/0x23 @ 1 > [ 28.239864] initcall hpet_insert_resource+0x0/0x23 returned 1 after 0 usecs > [ 28.246873] initcall hpet_insert_resource+0x0/0x23 returned with error code 1 > [ 28.254510] calling update_mp_table+0x0/0x6c3 @ 1 > [ 28.259355] initcall update_mp_table+0x0/0x6c3 returned 0 after 0 usecs > [ 28.266018] calling lapic_insert_resource+0x0/0x42 @ 1 > [ 28.271302] initcall lapic_insert_resource+0x0/0x42 returned 0 after 5 usecs > [ 28.278394] calling init_lapic_nmi_sysfs+0x0/0x39 @ 1 > [ 28.283587] initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0 usecs > [ 28.290597] calling ioapic_insert_resources+0x0/0x59 @ 1 > [ 28.296052] initcall ioapic_insert_resources+0x0/0x59 returned 0 after 1 usecs > [ 28.303337] calling io_apic_bug_finalize+0x0/0x1b @ 1 > [ 28.308521] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs > [ 28.315532] calling uv_init_heartbeat+0x0/0x19 @ 1 > [ 28.320464] initcall uv_init_heartbeat+0x0/0x19 returned 0 after 0 usecs > [ 28.327215] calling check_early_ioremap_leak+0x0/0x6d @ 1 > [ 28.332753] initcall check_early_ioremap_leak+0x0/0x6d returned 0 after 0 usecs > [ 28.340127] calling sched_init_debug+0x0/0x24 @ 1 > [ 28.344982] initcall sched_init_debug+0x0/0x24 returned 0 after 9 usecs > [ 28.351648] calling init_oops_id+0x0/0x40 @ 1 > [ 28.356147] initcall init_oops_id+0x0/0x40 returned 0 after 3 usecs > [ 28.362461] calling disable_boot_consoles+0x0/0x3a @ 1 > [ 28.367739] initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 usecs > [ 28.374838] calling pm_qos_power_init+0x0/0xe1 @ 1 > [ 28.380443] initcall pm_qos_power_init+0x0/0xe1 returned 0 after 657 usecs > [ 28.387374] calling debugfs_kprobe_init+0x0/0x90 @ 1 > [ 28.392503] initcall debugfs_kprobe_init+0x0/0x90 returned 0 after 8 usecs > [ 28.399426] calling max_swapfiles_check+0x0/0x8 @ 1 > [ 28.404443] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs > [ 28.411280] calling afs_init+0x0/0x1e5 @ 1 > [ 28.415508] kAFS: Red Hat AFS client v0.1 registering. > [ 28.421024] initcall afs_init+0x0/0x1e5 returned 0 after 5384 usecs > [ 28.427342] calling random32_reseed+0x0/0x5d @ 1 > [ 28.432134] initcall random32_reseed+0x0/0x5d returned 0 after 5 usecs > [ 28.438711] calling pci_sysfs_init+0x0/0x55 @ 1 > [ 28.443626] initcall pci_sysfs_init+0x0/0x55 returned 0 after 237 usecs > [ 28.450291] calling acpi_wakeup_device_init+0x0/0x78 @ 1 > [ 28.455745] initcall acpi_wakeup_device_init+0x0/0x78 returned 0 after 4 usecs > [ 28.463030] calling acpi_sleep_proc_init+0x0/0xa4 @ 1 > [ 28.468264] initcall acpi_sleep_proc_init+0x0/0xa4 returned 0 after 40 usecs > [ 28.475364] calling boot_wait_for_devices+0x0/0x19 @ 1 > [ 28.480643] initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 usecs > [ 28.487740] calling seqgen_init+0x0/0xf @ 1 > [ 28.492075] initcall seqgen_init+0x0/0xf returned 0 after 10 usecs > [ 28.498304] calling hd_init+0x0/0x333 @ 1 > [ 28.502485] hd: no drives specified - use hd=cyl,head,sectors on kernel command line > [ 28.510316] initcall hd_init+0x0/0x333 returned -1 after 7676 usecs > [ 28.516633] initcall hd_init+0x0/0x333 returned with error code -1 > [ 28.522953] calling scsi_complete_async_scans+0x0/0x100 @ 1 > [ 28.528663] initcall scsi_complete_async_scans+0x0/0x100 returned 0 after 0 usecs > [ 28.536213] calling rtc_hctosys+0x0/0x186 @ 1 > [ 28.540709] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) > [ 28.547027] initcall rtc_hctosys+0x0/0x186 returned -19 after 6170 usecs > [ 28.553780] calling pci_mmcfg_late_insert_resources+0x0/0x166 @ 1 > [ 28.560011] initcall pci_mmcfg_late_insert_resources+0x0/0x166 returned 1 after 0 usecs > [ 28.568078] initcall pci_mmcfg_late_insert_resources+0x0/0x166 returned with error code 1 > [ 28.576408] calling tcp_congestion_default+0x0/0x12 @ 1 > [ 28.581775] initcall tcp_congestion_default+0x0/0x12 returned 0 after 2 usecs > [ 28.588955] calling ip_auto_config+0x0/0xfdc @ 1 > [ 28.593732] initcall ip_auto_config+0x0/0xfdc returned 0 after 17 usecs > [ 28.600414] async_waiting @ 1 > [ 28.603422] async_continuing @ 1 after 0 usec > [ 28.622840] EXT3-fs: INFO: recovery required on readonly filesystem. > [ 28.629253] EXT3-fs: write access will be enabled during recovery. > [ 28.816662] kjournald starting. Commit interval 5 seconds > [ 28.822217] EXT3-fs: recovery complete. > [ 28.826721] EXT3-fs: mounted filesystem with ordered data mode. > [ 28.832725] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. > [ 28.839428] async_waiting @ 1 > [ 28.842448] async_continuing @ 1 after 0 usec > [ 28.846850] Freeing unused kernel memory: 660k freed > [ 31.426499] usb usb2: uevent > [ 31.439862] usb 2-0:1.0: uevent > [ 31.443363] usb usb3: uevent > [ 31.447267] usb 3-0:1.0: uevent > [ 31.450770] usb usb4: uevent > [ 31.463207] usb 4-0:1.0: uevent > [ 31.466695] usb usb5: uevent > [ 31.478429] usb 5-0:1.0: uevent > [ 31.500342] usb usb1: uevent > [ 31.503319] usb 1-0:1.0: uevent > [ 52.510805] sky2 eth0: enabling interface > [ 52.515295] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 54.905678] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both > [ 54.913314] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 65.904007] eth0: no IPv6 routers present > [ 122.816187] EXT3 FS on sda3, internal journal > [ 123.291568] Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k > [ 125.023796] warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) > [ 302.816025] Machine check events logged -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists