[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <498FF175.9010204@kernel.org>
Date: Mon, 09 Feb 2009 01:03:49 -0800
From: Yinghai Lu <yinghai@...nel.org>
To: Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Len Brown <lenb@...nel.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: [PATCH] x86: find nr_irqs_gsi with mp_ioapic_routing v3
Impact: find right nr_irqs_gsi on some systems.
one system has gap between gsi.
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48])
[ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56])
[ 0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62
...
[ 0.000000] nr_irqs_gsi: 38
so nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic.
need to get that with acpi_probe_gsi when acpi io_apic is used
v2: Ingo pointed out inline acpi_probe_gsi() should be with !CONFIG_ACPI
v3: against current upstream for 2.6.29, because it is 2.6.29 material
Signed-off-by: Yinghai Lu <yinghai@...nel.org>
---
arch/x86/include/asm/mpspec.h | 6 ++++++
arch/x86/kernel/acpi/boot.c | 23 +++++++++++++++++++++++
arch/x86/kernel/io_apic.c | 20 +++++++++++++++-----
3 files changed, 44 insertions(+), 5 deletions(-)
Index: linux-2.6/arch/x86/include/asm/mpspec.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/mpspec.h
+++ linux-2.6/arch/x86/include/asm/mpspec.h
@@ -60,6 +60,7 @@ extern void mp_override_legacy_irq(u8 bu
u32 gsi);
extern void mp_config_acpi_legacy_irqs(void);
extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
+extern int acpi_probe_gsi(void);
#ifdef CONFIG_X86_IO_APIC
extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
u32 gsi, int triggering, int polarity);
@@ -71,6 +72,11 @@ mp_config_acpi_gsi(unsigned char number,
return 0;
}
#endif
+#else /* !CONFIG_ACPI */
+static inline int acpi_probe_gsi(void)
+{
+ return 0;
+}
#endif /* CONFIG_ACPI */
#define PHYSID_ARRAY_SIZE BITS_TO_LONGS(MAX_APICS)
Index: linux-2.6/arch/x86/kernel/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/io_apic.c
+++ linux-2.6/arch/x86/kernel/io_apic.c
@@ -3841,14 +3841,24 @@ int __init io_apic_get_redir_entries (in
void __init probe_nr_irqs_gsi(void)
{
- int idx;
int nr = 0;
- for (idx = 0; idx < nr_ioapics; idx++)
- nr += io_apic_get_redir_entries(idx) + 1;
-
- if (nr > nr_irqs_gsi)
+ nr = acpi_probe_gsi();
+ if (nr > nr_irqs_gsi) {
nr_irqs_gsi = nr;
+ } else {
+ /* for acpi=off or acpi is not compiled in */
+ int idx;
+
+ nr = 0;
+ for (idx = 0; idx < nr_ioapics; idx++)
+ nr += io_apic_get_redir_entries(idx) + 1;
+
+ if (nr > nr_irqs_gsi)
+ nr_irqs_gsi = nr;
+ }
+
+ printk(KERN_DEBUG "nr_irqs_gsi: %d\n", nr_irqs_gsi);
}
/* --------------------------------------------------------------------------
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -973,6 +973,29 @@ void __init mp_register_ioapic(int id, u
nr_ioapics++;
}
+int __init acpi_probe_gsi(void)
+{
+ int idx;
+ int gsi;
+ int max_gsi = 0;
+
+ if (acpi_disabled)
+ return 0;
+
+ if (!acpi_ioapic)
+ return 0;
+
+ max_gsi = 0;
+ for (idx = 0; idx < nr_ioapics; idx++) {
+ gsi = mp_ioapic_routing[idx].gsi_end;
+
+ if (gsi > max_gsi)
+ max_gsi = gsi;
+ }
+
+ return max_gsi + 1;
+}
+
static void assign_to_mp_irq(struct mp_config_intsrc *m,
struct mp_config_intsrc *mp_irq)
{
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists