| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4990DF7C.1090701@kernel.org>
Date: Mon, 09 Feb 2009 17:59:24 -0800
From: Yinghai Lu <yinghai@...nel.org>
To: jbarnes@...tuousgeek.org
CC: Ingo Molnar <mingo@...e.hu>,
Ed Swierk <eswierk@...stanetworks.com>, hpa@...or.com,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org
Subject: [PATCH] x86/pci: host mmconfig detect clean up v3
Impact: not assume one place for mmconfig in nb
prepare for following case: amd fam10h + mcp55
CPU MSR has some range, mcp55 pci config will have another one.
also prepare for mcp55 + io55 system. every one will have one range.
if it s mcp55 detect duties to execlude range that is used by CPU MSR
aka, if CPU state bus 0-255, range in mcp55 need to be dropped.
because HW in CPU will not route that mcp55 mmconfig to handle it.
v2: fix e7520 exit path
v3: make it could support
PCI MMCONFIG 0 [00-3f]
PCI MMCONFIG 0 [40-7f]
PCI MMCONFIG 0 [80-ff]
Signed-off-by: Yinghai Lu <yinghai.lu@...nel.org>
---
arch/x86/pci/mmconfig-shared.c | 161 +++++++++++++++++++++++++++--------------
arch/x86/pci/mmconfig_64.c | 15 ++-
2 files changed, 118 insertions(+), 58 deletions(-)
Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
+++ linux-2.6/arch/x86/pci/mmconfig-shared.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/bitmap.h>
+#include <linux/sort.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
@@ -24,24 +25,49 @@
/* Indicate if the mmcfg resources have been placed into the resource table. */
static int __initdata pci_mmcfg_resources_inserted;
+static __init int extend_mmcfg(int num)
+{
+ struct acpi_mcfg_allocation *new;
+ int new_num = pci_mmcfg_config_num + num;
+
+ new = kzalloc(sizeof(pci_mmcfg_config[0]) * new_num, GFP_KERNEL);
+ if (!new)
+ return -1;
+
+ if (pci_mmcfg_config) {
+ memcpy(new, pci_mmcfg_config,
+ sizeof(pci_mmcfg_config[0]) * new_num);
+ kfree(pci_mmcfg_config);
+ }
+ pci_mmcfg_config = new;
+
+ return 0;
+}
+
+static __init void fill_one_mmcfg(u64 addr, int segment, int start, int end)
+{
+ int i = pci_mmcfg_config_num;
+
+ pci_mmcfg_config_num++;
+ pci_mmcfg_config[i].address = addr;
+ pci_mmcfg_config[i].pci_segment = segment;
+ pci_mmcfg_config[i].start_bus_number = start;
+ pci_mmcfg_config[i].end_bus_number = end;
+}
+
static const char __init *pci_mmcfg_e7520(void)
{
u32 win;
raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0xce, 2, &win);
win = win & 0xf000;
- if(win == 0x0000 || win == 0xf000)
- pci_mmcfg_config_num = 0;
- else {
- pci_mmcfg_config_num = 1;
- pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL);
- if (!pci_mmcfg_config)
- return NULL;
- pci_mmcfg_config[0].address = win << 16;
- pci_mmcfg_config[0].pci_segment = 0;
- pci_mmcfg_config[0].start_bus_number = 0;
- pci_mmcfg_config[0].end_bus_number = 255;
- }
+ if (win == 0x0000 || win == 0xf000)
+ return NULL;
+
+ if (extend_mmcfg(1) == -1)
+ return NULL;
+
+ fill_one_mmcfg(win << 16, 0, 0, 255);
return "Intel Corporation E7520 Memory Controller Hub";
}
@@ -50,13 +76,11 @@ static const char __init *pci_mmcfg_inte
{
u32 pciexbar, mask = 0, len = 0;
- pci_mmcfg_config_num = 1;
-
raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0x48, 4, &pciexbar);
/* Enable bit */
if (!(pciexbar & 1))
- pci_mmcfg_config_num = 0;
+ return NULL;
/* Size bits */
switch ((pciexbar >> 1) & 3) {
@@ -73,28 +97,23 @@ static const char __init *pci_mmcfg_inte
len = 0x04000000U;
break;
default:
- pci_mmcfg_config_num = 0;
+ return NULL;
}
/* Errata #2, things break when not aligned on a 256Mb boundary */
/* Can only happen in 64M/128M mode */
if ((pciexbar & mask) & 0x0fffffffU)
- pci_mmcfg_config_num = 0;
+ return NULL;
/* Don't hit the APIC registers and their friends */
if ((pciexbar & mask) >= 0xf0000000U)
- pci_mmcfg_config_num = 0;
+ return NULL;
- if (pci_mmcfg_config_num) {
- pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL);
- if (!pci_mmcfg_config)
- return NULL;
- pci_mmcfg_config[0].address = pciexbar & mask;
- pci_mmcfg_config[0].pci_segment = 0;
- pci_mmcfg_config[0].start_bus_number = 0;
- pci_mmcfg_config[0].end_bus_number = (len >> 20) - 1;
- }
+ if (extend_mmcfg(1) == -1)
+ return NULL;
+
+ fill_one_mmcfg(pciexbar & mask, 0, 0, (len >> 20) - 1);
return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub";
}
@@ -138,18 +157,11 @@ static const char __init *pci_mmcfg_amd_
busnbits = 8;
}
- pci_mmcfg_config_num = (1 << segnbits);
- pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]) *
- pci_mmcfg_config_num, GFP_KERNEL);
- if (!pci_mmcfg_config)
+ if (extend_mmcfg(1 << segnbits) == -1)
return NULL;
- for (i = 0; i < (1 << segnbits); i++) {
- pci_mmcfg_config[i].address = base + (1<<28) * i;
- pci_mmcfg_config[i].pci_segment = i;
- pci_mmcfg_config[i].start_bus_number = 0;
- pci_mmcfg_config[i].end_bus_number = (1 << busnbits) - 1;
- }
+ for (i = 0; i < (1 << segnbits); i++)
+ fill_one_mmcfg(base + (1<<28) * i, i, 0, (1 << busnbits) - 1);
return "AMD Family 10h NB";
}
@@ -173,6 +185,48 @@ static struct pci_mmcfg_hostbridge_probe
0x1200, pci_mmcfg_amd_fam10h },
};
+static int __init cmp_mmcfg(const void *x1, const void *x2)
+{
+ const typeof(pci_mmcfg_config[0]) *m1 = x1;
+ const typeof(pci_mmcfg_config[0]) *m2 = x2;
+ int start1, start2;
+
+ start1 = m1->start_bus_number;
+ start2 = m2->start_bus_number;
+
+ return start1 - start2;
+}
+
+static void __init pci_mmcfg_check_end_bus_number(void)
+{
+ int i;
+ typeof(pci_mmcfg_config[0]) *cfg, *cfgx;
+
+ /* sort them at first */
+ sort(pci_mmcfg_config, pci_mmcfg_config_num,
+ sizeof(pci_mmcfg_config[0]), cmp_mmcfg, NULL);
+
+ /* last one*/
+ if (pci_mmcfg_config_num > 0) {
+ i = pci_mmcfg_config_num - 1;
+ cfg = &pci_mmcfg_config[i];
+ if (cfg->end_bus_number < cfg->start_bus_number)
+ cfg->end_bus_number = 255;
+ }
+
+ /* don't overlap please */
+ for (i = 0; i < pci_mmcfg_config_num - 1; i++) {
+ cfg = &pci_mmcfg_config[i];
+ cfgx = &pci_mmcfg_config[i+1];
+
+ if (cfg->end_bus_number < cfg->start_bus_number)
+ cfg->end_bus_number = 255;
+
+ if (cfg->end_bus_number >= cfgx->start_bus_number)
+ cfg->end_bus_number = cfgx->start_bus_number - 1;
+ }
+}
+
static int __init pci_mmcfg_check_hostbridge(void)
{
u32 l;
@@ -186,31 +240,33 @@ static int __init pci_mmcfg_check_hostbr
pci_mmcfg_config_num = 0;
pci_mmcfg_config = NULL;
- name = NULL;
- for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
+ for (i = 0; i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
bus = pci_mmcfg_probes[i].bus;
devfn = pci_mmcfg_probes[i].devfn;
raw_pci_ops->read(0, bus, devfn, 0, 4, &l);
vendor = l & 0xffff;
device = (l >> 16) & 0xffff;
+ name = NULL;
if (pci_mmcfg_probes[i].vendor == vendor &&
pci_mmcfg_probes[i].device == device)
name = pci_mmcfg_probes[i].probe();
- }
- if (name) {
- printk(KERN_INFO "PCI: Found %s %s MMCONFIG support.\n",
- name, pci_mmcfg_config_num ? "with" : "without");
+ if (name)
+ printk(KERN_INFO "PCI: Found %s with MMCONFIG support.\n",
+ name);
}
- return name != NULL;
+ /* some end_bus_number is crazy, fix it */
+ pci_mmcfg_check_end_bus_number();
+
+ return pci_mmcfg_config_num != 0;
}
static void __init pci_mmcfg_insert_resources(void)
{
-#define PCI_MMCFG_RESOURCE_NAME_LEN 19
+#define PCI_MMCFG_RESOURCE_NAME_LEN 24
int i;
struct resource *res;
char *names;
@@ -228,9 +284,10 @@ static void __init pci_mmcfg_insert_reso
struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i];
num_buses = cfg->end_bus_number - cfg->start_bus_number + 1;
res->name = names;
- snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
- cfg->pci_segment);
- res->start = cfg->address;
+ snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN,
+ "PCI MMCONFIG %u [%02x-%02x]", cfg->pci_segment,
+ cfg->start_bus_number, cfg->end_bus_number);
+ res->start = cfg->address + (cfg->start_bus_number << 20);
res->end = res->start + (num_buses << 20) - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
insert_resource(&iomem_resource, res);
@@ -354,8 +411,6 @@ static void __init pci_mmcfg_reject_brok
(pci_mmcfg_config[0].address == 0))
return;
- cfg = &pci_mmcfg_config[0];
-
for (i = 0; i < pci_mmcfg_config_num; i++) {
int valid = 0;
u64 addr, size;
@@ -423,10 +478,10 @@ static void __init __pci_mmcfg_init(int
known_bridge = 1;
}
- if (!known_bridge) {
+ if (!known_bridge)
acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
- pci_mmcfg_reject_broken(early);
- }
+
+ pci_mmcfg_reject_broken(early);
if ((pci_mmcfg_config_num == 0) ||
(pci_mmcfg_config == NULL) ||
Index: linux-2.6/arch/x86/pci/mmconfig_64.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/mmconfig_64.c
+++ linux-2.6/arch/x86/pci/mmconfig_64.c
@@ -112,13 +112,18 @@ static struct pci_raw_ops pci_mmcfg = {
static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg)
{
void __iomem *addr;
- u32 size;
+ u64 start, size;
- size = (cfg->end_bus_number + 1) << 20;
- addr = ioremap_nocache(cfg->address, size);
+ start = cfg->start_bus_number;
+ start <<= 20;
+ start += cfg->address;
+ size = cfg->end_bus_number + 1 - cfg->start_bus_number;
+ size <<= 20;
+ addr = ioremap_nocache(start, size);
if (addr) {
printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n",
- cfg->address, cfg->address + size - 1);
+ start, start + size - 1);
+ addr -= cfg->start_bus_number << 20;
}
return addr;
}
@@ -157,7 +162,7 @@ void __init pci_mmcfg_arch_free(void)
for (i = 0; i < pci_mmcfg_config_num; ++i) {
if (pci_mmcfg_virt[i].virt) {
- iounmap(pci_mmcfg_virt[i].virt);
+ iounmap(pci_mmcfg_virt[i].virt + (pci_mmcfg_virt[i].cfg->start_bus_number << 20));
pci_mmcfg_virt[i].virt = NULL;
pci_mmcfg_virt[i].cfg = NULL;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists