[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20090212145521.GC18597@vega.lgb.hu>
Date: Thu, 12 Feb 2009 15:55:21 +0100
From: Gábor Lénárt <lgb@....hu>
To: Michal Simek <michal.simek@...alogix.com>
Cc: Linux Kernel list <linux-kernel@...r.kernel.org>
Subject: Re: Network driver issue
On Thu, Feb 12, 2009 at 03:28:34PM +0100, Michal Simek wrote:
> Hi guys,
>
> Could you give any hint what can be wrong? I use 2.6.29-rc4.
> Tcpdump and wireshark show me that board can send packet and get
> response but don't show
> timing ping info. For incomming packets (exclude ARP) isn't any response
> back. ARPs work well.
Are you sure that there is no netfilter rule(s) which filters out responses?
iptables-save > /tmp/iptables.save
iptables -F INPUT
iptables -P INPUT ACCEPT
Sure, you should not leave your rules in this state, just for the time of
checking. You can load your old ruleset back then with:
iptables-restore < /tmp/iptables.save
I just write this hint, because I've already seen this fault many times
around ...
>
> Thanks,
> Michal
>
>
> ~ # tcpdump &
> ~ # device eth0 entered promiscuous mode
> tcpdump: listening on eth0
>
> ~ #
> ~ # ping 192.168.0.102
> PING 192.168.0.102 (192.168.0.102): 56 data bytes
> 00:00:34.639430 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:34.642714 192.168.0.102 > 192.168.0.20: icmp: echo reply
> 00:00:35.662135 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:35.667248 192.168.0.102 > 192.168.0.20: icmp: echo reply
> 00:00:36.671424 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:36.676416 192.168.0.102 > 192.168.0.20: icmp: echo reply
> 00:00:37.681470 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:37.686573 192.168.0.102 > 192.168.0.20: icmp: echo reply
> 00:00:38.691440 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:38.696452 192.168.0.102 > 192.168.0.20: icmp: echo reply
> 00:00:39.701454 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:39.706520 192.168.0.102 > 192.168.0.20: icmp: echo reply
> 00:00:40.711422 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:40.716429 192.168.0.102 > 192.168.0.20: icmp: echo reply
> 00:00:41.721460 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:41.726542 192.168.0.102 > 192.168.0.20: icmp: echo reply
> 00:00:42.731478 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:42.736476 192.168.0.102 > 192.168.0.20: icmp: echo reply
> 00:00:43.741444 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:43.746525 192.168.0.102 > 192.168.0.20: icmp: echo reply
> 00:00:44.751429 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:44.756441 192.168.0.102 > 192.168.0.20: icmp: echo reply
> 00:00:45.761449 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:45.766528 192.168.0.102 > 192.168.0.20: icmp: echo reply
> 00:00:46.771434 192.168.0.20 > 192.168.0.102: icmp: echo request (DF)
> 00:00:46.776438 192.168.0.102 > 192.168.0.20: icmp: echo reply
>
> --- 192.168.0.102 ping statistics ---
> 13 packets transmitted, 0 packets received, 100% packet loss
> ~ # 00:01:06.468561 192.168.0.102 > 192.168.0.20: icmp: echo request (DF)
> 00:01:07.477512 192.168.0.102 > 192.168.0.20: icmp: echo request (DF)
> 00:01:08.477428 192.168.0.102 > 192.168.0.20: icmp: echo request (DF)
> 00:01:09.477253 192.168.0.102 > 192.168.0.20: icmp: echo request (DF)
> 00:01:10.477131 192.168.0.102 > 192.168.0.20: icmp: echo request (DF)
> 00:01:11.466927 arp who-has 192.168.0.20 tell 192.168.0.102
> 00:01:11.472649 arp reply 192.168.0.20 is-at 0:a:35:0:22:1
> 00:01:11.477375 192.168.0.102 > 192.168.0.20: icmp: echo request (DF)
> 00:01:12.476840 192.168.0.102 > 192.168.0.20: icmp: echo request (DF)
>
> ~ # ifconfig
> eth0 Link encap:Ethernet HWaddr 00:0A:35:00:22:01
> inet addr:192.168.0.20 Bcast:192.168.0.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MTU:1500 Metric:1
> RX packets:26 errors:0 dropped:0 overruns:0 frame:0
> TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:2434 (2.3 KiB) TX bytes:1694 (1.6 KiB)
> Interrupt:5
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> ~ #
> ~ # ping 127.0.0.1
> PING 127.0.0.1 (127.0.0.1): 56 data bytes
> 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=7.4 ms
> 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=3.4 ms
> 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=3.4 ms
>
> --- 127.0.0.1 ping statistics ---
> 3 packets transmitted, 3 packets received, 0% packet loss
> round-trip min/avg/max = 3.4/4.7/7.4 ms
> ~ #
>
>
> --
> Michal Simek, Ing. (M.Eng)
> PetaLogix - Linux Solutions for a Reconfigurable World
> w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
- Gábor
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists