Message-ID: <20090212230415.GO6759@linux.vnet.ibm.com>
Date:	Thu, 12 Feb 2009 15:04:15 -0800
From:	"Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
To:	Mathieu Desnoyers <compudj@...stal.dyndns.org>
Cc:	ltt-dev@...ts.casi.polymtl.ca, linux-kernel@...r.kernel.org
Subject: Re: [ltt-dev] [RFC git tree] Userspace RCU (urcu) for Linux
	(repost)

On Thu, Feb 12, 2009 at 04:53:41PM -0500, Mathieu Desnoyers wrote:
> * Paul E. McKenney (paulmck@...ux.vnet.ibm.com) wrote:
> > On Thu, Feb 12, 2009 at 02:38:26PM -0500, Mathieu Desnoyers wrote:
> > > Replying to a separate portion of the mail with less CC :
> > > 
> > > 
> > > > On Thu, Feb 12, 2009 at 02:05:39AM -0500, Mathieu Desnoyers wrote:
> > > > > * Paul E. McKenney (paulmck@...ux.vnet.ibm.com) wrote:
> > > > > > On Wed, Feb 11, 2009 at 11:08:24PM -0500, Mathieu Desnoyers wrote:
> > > > > > > * Paul E. McKenney (paulmck@...ux.vnet.ibm.com) wrote:
> > > > > > > > On Wed, Feb 11, 2009 at 04:35:49PM -0800, Paul E. McKenney wrote:
> > > > > > > > > On Wed, Feb 11, 2009 at 04:42:58PM -0500, Mathieu Desnoyers wrote:
> > > > > > > > > > * Paul E. McKenney (paulmck@...ux.vnet.ibm.com) wrote:
> > > > > > 
> > > > > > [ . . . ]
> > > > > > 
> > > > > > > > And I had bugs in my model that allowed the rcu_read_lock() model
> > > > > > > > to nest indefinitely, which overflowed into the top bit, messing
> > > > > > > > things up.  :-/
> > > > > > > > 
> > > > > > > > Attached is a fixed model.  This model validates correctly (woo-hoo!).
> > > > > > > > Even better, gives the expected error if you comment out line 180 and
> > > > > > > > uncomment line 213, this latter corresponding to the error case I called
> > > > > > > > out a few days ago.
> > > > > > > > 
> > > > > > > 
> > > > > > > Great ! :) I added this version to the git repository, hopefully it's ok
> > > > > > > with you ?
> > > > > > 
> > > > > > Works for me!
> > > > > > 
> > > > > > > > I will play with removing models of mb...
> > > > > > > 
> > > > > > > OK, I see you already did..
> > > > > > 
> > > > > > I continued this, and surprisingly few are actually required, though
> > > > > > I don't fully trust the modeling of removed memory barriers.
> > > > > 
> > > > > On my side I cleaned up the code a lot, and actually added some barriers
> > > > > ;) Especially in the busy loops, where we expect the other thread's
> > > > > value to change eventually between iterations. A smp_rmb() seems more
> > > > > appropriate that barrier(). I also added a lot of comments about
> > > > > barriers in the code, and made the reader side much easier to review.
> > > > > 
> > > > > Please feel free to comment on my added code comments.
> > > > 
> > > > The torture test now looks much more familiar.  ;-)
> > > > 
> > > > I fixed some compiler warnings (in my original, sad to say), added an
> > > > ACCESS_ONCE() to rcu_read_lock() (also in my original),
> > > 
> > > Yes, I thought about this ACCESS_ONCE during my sleep.. just did not
> > > have to to update the source yet. :)
> > > 
> > > Merged. Thanks !
> > > 
> > > [...]
> > > 
> > > > --- a/urcu.c
> > > > +++ b/urcu.c
> > > > @@ -99,7 +99,8 @@ static void force_mb_single_thread(pthread_t tid)
> > > >  	 * BUSY-LOOP.
> > > >  	 */
> > > >  	while (sig_done < 1)
> > > > -		smp_rmb();	/* ensure we re-read sig-done */
> > > > +		barrier();	/* ensure compiler re-reads sig-done */
> > > > +				/* cache coherence guarantees CPU re-read. */
> > > 
> > > That could be a smp_rmc() ? (see other mail)
> > 
> > I prefer making ACCESS_ONCE() actually having the full semantics implied
> > by its name.  ;-)
> > 
> > See patch at end of this email.
> > 
> 
> See my email about LOAD_REMOTE/STORE_REMOTE :)
> 
> > > >  	smp_mb();	/* read sig_done before ending the barrier */
> > > >  }
> > > >  
> > > > @@ -113,7 +114,8 @@ static void force_mb_all_threads(void)
> > > >  	if (!reader_data)
> > > >  		return;
> > > >  	sig_done = 0;
> > > > -	smp_mb();	/* write sig_done before sending the signals */
> > > > +	/* smp_mb();	write sig_done before sending the signals */
> > > > +			/* redundant with barriers in pthread_kill(). */
> > > 
> > > Absolutely not. pthread_kill does not send a signal to self in every
> > > case because the writer thread has not requirement to register itself.
> > > It *could* be registered as a reader too, but does not have to.
> > 
> > No, not the barrier in the signal handler, but rather the barriers in
> > the system call invoked by pthread_kill().
> > 
> 
> The barrier implied by going through a system call does not imply cache
> flushing AFAIK. So we would have to at least leave a big comment here
> saying that the kernel has to provide such guarantee. So under that
> comment I would leave a smp_mc();.
> 
> > > >  	for (index = reader_data; index < reader_data + num_readers; index++)
> > > >  		pthread_kill(index->tid, SIGURCU);
> > > >  	/*
> > > > @@ -121,7 +123,8 @@ static void force_mb_all_threads(void)
> > > >  	 * BUSY-LOOP.
> > > >  	 */
> > > >  	while (sig_done < num_readers)
> > > > -		smp_rmb();	/* ensure we re-read sig-done */
> > > > +		barrier();	/* ensure compiler re-reads sig-done */
> > > > +				/* cache coherence guarantees CPU re-read. */
> > > 
> > > That could be a smp_rmc() ?
> > 
> > Again, prefer:
> > 
> > 	while (ACCESS_ONCE() < num_readers)
> > 
> > after upgrading ACCESS_ONCE() to provide the full semantics.
> > 
> > I will send a patch.
> 
> I'll use a variation :
> 
>         while (LOAD_REMOTE(sig_done) < num_readers)
>                 cpu_relax();

I suspect that LOAD_SHARED() and STORE_SHARED() would be more intuitive.
But shouldn't we align with the Linux-kernel usage where reasonable?
(Yes, this can be a moving target, but there isn't much else that
currently supports this level of SMP function on quite the variety of
CPU architectures.)

> > > >  	smp_mb();	/* read sig_done before ending the barrier */
> > > >  }
> > > >  #endif
> > > > @@ -181,7 +184,8 @@ void synchronize_rcu(void)
> > > >  	 * the writer waiting forever while new readers are always accessing
> > > >  	 * data (no progress).
> > > >  	 */
> > > > -	smp_mb();
> > > > +	/* smp_mb(); Don't need this one for CPU, only compiler. */
> > > > +	barrier();
> > > 
> > > smp_mc() ?
> > 
> > ACCESS_ONCE().
> > 
> 
> Ah, this is what I dislike about using :
> 
>   STORE_REMOTE(x, v);
> ...
>   if (LOAD_REMOTE(y) ...)
> rather than
>   x = v;
>   smp_mc();
>   if (y ...)
> 
> We will end up in a situation where we do 2 cache flushes rather than a
> single one. So wherever possible, I would be tempted to leave the
> smp_mc().

Ummm...  There is a very real reason why I moved from bare
smp_read_barrier_depends() calls to rcu_dereference().  Code with an
rcu_dereference() style is -much- easier to read.

So I would flip that -- use the per-variable API unless you see
measureable system-level pain.  Because the variable-free API will
inflict very real readability pain!

The problem is that the relationship of the variable-free API to the
variables it is supposed to constrain gets lost.  With the per-variable
APIs, the relationship is obvious and explicit.

> > > >  
> > > >  	switch_next_urcu_qparity();	/* 1 -> 0 */
> > > >  
> > > 
> > > Side-note :
> > > on archs without cache coherency, all smp_[rw ]mb would turn into a
> > > cache flush.
> > 
> > So I might need more in my ACCESS_ONCE() below.
> > 
> > Add .gitignore files, and redefine accesses in terms of a new
> > ACCESS_ONCE().
> 
> I'll merge the .gitignore file, thanks,

Sounds good!

> Please see my updated git tree.

Will do!

							Thanx, Paul

> Mathieu
> 
> > Signed-off-by: Paul E. McKenney <paulmck@...ux.vnet.ibm.com>
> > ---
> > 
> >  .gitignore              |    9 +++++++++
> >  formal-model/.gitignore |    3 +++
> >  urcu.c                  |   10 ++++------
> >  urcu.h                  |   12 ++++++++++++
> >  4 files changed, 28 insertions(+), 6 deletions(-)
> > 
> > diff --git a/.gitignore b/.gitignore
> > new file mode 100644
> > index 0000000..29aa7e5
> > --- /dev/null
> > +++ b/.gitignore
> > @@ -0,0 +1,9 @@
> > +test_rwlock_timing
> > +test_urcu
> > +test_urcu_timing
> > +test_urcu_yield
> > +urcu-asm.o
> > +urcu.o
> > +urcutorture
> > +urcutorture-yield
> > +urcu-yield.o
> > diff --git a/formal-model/.gitignore b/formal-model/.gitignore
> > new file mode 100644
> > index 0000000..49fdd8a
> > --- /dev/null
> > +++ b/formal-model/.gitignore
> > @@ -0,0 +1,3 @@
> > +pan
> > +pan.*
> > +urcu.spin.trail
> > diff --git a/urcu.c b/urcu.c
> > index a696439..f61d4c3 100644
> > --- a/urcu.c
> > +++ b/urcu.c
> > @@ -98,9 +98,8 @@ static void force_mb_single_thread(pthread_t tid)
> >  	 * Wait for sighandler (and thus mb()) to execute on every thread.
> >  	 * BUSY-LOOP.
> >  	 */
> > -	while (sig_done < 1)
> > -		barrier();	/* ensure compiler re-reads sig-done */
> > -				/* cache coherence guarantees CPU re-read. */
> > +	while (ACCESS_ONCE(sig_done) < 1)
> > +		continue;
> >  	smp_mb();	/* read sig_done before ending the barrier */
> >  }
> >  
> > @@ -122,9 +121,8 @@ static void force_mb_all_threads(void)
> >  	 * Wait for sighandler (and thus mb()) to execute on every thread.
> >  	 * BUSY-LOOP.
> >  	 */
> > -	while (sig_done < num_readers)
> > -		barrier();	/* ensure compiler re-reads sig-done */
> > -				/* cache coherence guarantees CPU re-read. */
> > +	while (ACCESS_ONCE(sig_done) < num_readers)
> > +		continue;
> >  	smp_mb();	/* read sig_done before ending the barrier */
> >  }
> >  #endif
> > diff --git a/urcu.h b/urcu.h
> > index 79d9464..dd040a5 100644
> > --- a/urcu.h
> > +++ b/urcu.h
> > @@ -98,6 +98,9 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
> >  /* Nop everywhere except on alpha. */
> >  #define smp_read_barrier_depends()
> >  
> > +#define CONFIG_ARCH_CACHE_COHERENT
> > +#define cpu_relax barrier
> > +
> >  /*
> >   * Prevent the compiler from merging or refetching accesses.  The compiler
> >   * is also forbidden from reordering successive instances of ACCESS_ONCE(),
> > @@ -110,7 +113,16 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
> >   * use is to mediate communication between process-level code and irq/NMI
> >   * handlers, all running on the same CPU.
> >   */
> > +#ifdef CONFIG_ARCH_CACHE_COHERENT
> >  #define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x))
> > +#else /* #ifdef CONFIG_ARCH_CACHE_COHERENT */
> > +#define ACCESS_ONCE(x)     ({ \
> > +				typeof(x) _________x1; \
> > +				_________x1 = (*(volatile typeof(x) *)&(x)); \
> > +				cpu_relax(); \
> > +				(_________x1); \
> > +				})
> > +#endif /* #else #ifdef CONFIG_ARCH_CACHE_COHERENT */
> >  
> >  /**
> >   * rcu_dereference - fetch an RCU-protected pointer in an
> > 
> 
> -- 
> Mathieu Desnoyers
> OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists