| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20090213145943.GJ32064@in.ibm.com>
Date: Fri, 13 Feb 2009 20:29:43 +0530
From: "K.Prasad" <prasad@...ux.vnet.ibm.com>
To: Ingo Molnar <mingo@...e.hu>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Alan Stern <stern@...land.harvard.edu>,
Roland McGrath <roland@...hat.com>, richardj_moore@...ibm.com,
jason.wessel@...driver.com
Subject: [Patch 10/10] Sample HW breakpoint over kernel data address
Sample HW breakpoint over kernel data address
This patch introduces a sample kernel module to demonstrate the use of Hardware
Breakpoint feature. It places a breakpoint over the kernel variable 'pid_max'
to monitor all write operations and emits a function-backtrace when done.
Signed-off-by: K.Prasad <prasad@...ux.vnet.ibm.com>
---
samples/Kconfig | 6 ++
samples/Makefile | 3 -
samples/hw_breakpoint/Makefile | 1
samples/hw_breakpoint/data_breakpoint.c | 80 ++++++++++++++++++++++++++++++++
4 files changed, 89 insertions(+), 1 deletion(-)
Index: linux-2.6-tip.hbkpt/samples/Kconfig
===================================================================
--- linux-2.6-tip.hbkpt.orig/samples/Kconfig
+++ linux-2.6-tip.hbkpt/samples/Kconfig
@@ -39,5 +39,11 @@ config SAMPLE_KRETPROBES
default m
depends on SAMPLE_KPROBES && KRETPROBES
+config SAMPLE_HW_BREAKPOINT
+ tristate "Build kernel hardware breakpoint examples -- loadable modules only"
+ depends on m
+ help
+ This builds kernel hardware breakpoint example modules.
+
endif # SAMPLES
Index: linux-2.6-tip.hbkpt/samples/Makefile
===================================================================
--- linux-2.6-tip.hbkpt.orig/samples/Makefile
+++ linux-2.6-tip.hbkpt/samples/Makefile
@@ -1,3 +1,4 @@
# Makefile for Linux samples code
-obj-$(CONFIG_SAMPLES) += markers/ kobject/ kprobes/ tracepoints/
+obj-$(CONFIG_SAMPLES) += markers/ kobject/ kprobes/ tracepoints/ \
+ hw_breakpoint/
Index: linux-2.6-tip.hbkpt/samples/hw_breakpoint/Makefile
===================================================================
--- /dev/null
+++ linux-2.6-tip.hbkpt/samples/hw_breakpoint/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SAMPLE_HW_BREAKPOINT) += data_breakpoint.o
Index: linux-2.6-tip.hbkpt/samples/hw_breakpoint/data_breakpoint.c
===================================================================
--- /dev/null
+++ linux-2.6-tip.hbkpt/samples/hw_breakpoint/data_breakpoint.c
@@ -0,0 +1,80 @@
+/*
+ * data_breakpoint.c - Sample HW Breakpoint file to watch kernel data address
+ *
+ * This file is a kernel module that places a breakpoint over 'pid_max' kernel
+ * variable using Hardware Breakpoint register. The corresponding handler which
+ * prints a backtrace is invoked everytime a write operation is performed on
+ * that variable.
+ *
+ * After inserting this module, invoke a write operation using
+ * 'echo <desired_value> > /proc/sys/kernel/pid_max'
+ * to find the function-call backtrace.
+ *
+ * Copyright (C) IBM Corporation, 2009
+ */
+#include <linux/module.h> /* Needed by all modules */
+#include <linux/kernel.h> /* Needed for KERN_INFO */
+#include <linux/init.h> /* Needed for the macros */
+
+#include <asm/hw_breakpoint.h>
+
+struct hw_breakpoint pid_max_hbkpt;
+
+void pid_max_hbkpt_installed(struct hw_breakpoint *temp, struct pt_regs
+ *temp_regs)
+{
+ printk(KERN_INFO "pid_max_hbkpt ENABLED\n");
+}
+
+void pid_max_hbkpt_uninstalled(struct hw_breakpoint *temp, struct
+ pt_regs * temp_regs)
+{
+ printk(KERN_INFO "pid_max_hbkpt DISABLED\n");
+}
+
+void pid_max_hbkpt_handler(struct hw_breakpoint *temp, struct pt_regs
+ *temp_regs)
+{
+ printk(KERN_INFO "pid_max value is changed\n");
+ dump_stack();
+ printk(KERN_INFO "Dump stack from pid_max_hbkpt_handler\n");
+}
+
+static int __init hw_break_module_init(void)
+{
+ int ret;
+
+#ifdef CONFIG_X86
+ pid_max_hbkpt.info.name = "pid_max";
+ pid_max_hbkpt.info.type = HW_BREAKPOINT_WRITE;
+ pid_max_hbkpt.info.len = HW_BREAKPOINT_LEN_4;
+ pid_max_hbkpt.priority = HW_BREAKPOINT_PRIO_NORMAL;
+
+ pid_max_hbkpt.installed = (void *)pid_max_hbkpt_installed;
+ pid_max_hbkpt.uninstalled = (void *)pid_max_hbkpt_uninstalled;
+ pid_max_hbkpt.triggered = (void *)pid_max_hbkpt_handler;
+#endif /* CONFIG_X86 */
+
+ ret = register_kernel_hw_breakpoint(&pid_max_hbkpt);
+
+ if (ret < 0) {
+ printk(KERN_INFO "Breakpoint registration failed\n");
+ return ret;
+ } else
+ printk(KERN_INFO "HW Breakpoint for pid_max write installed\n");
+
+ return 0;
+}
+
+static void __exit hw_break_module_exit(void)
+{
+ unregister_kernel_hw_breakpoint(&pid_max_hbkpt);
+ printk(KERN_INFO "HW Breakpoint for pid_max write uninstalled\n");
+}
+
+module_init(hw_break_module_init);
+module_exit(hw_break_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("K.Prasad");
+MODULE_DESCRIPTION("pid_max breakpoint");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists