/dev/dvd:

 Model=HL-DT-ST DVDRAM GMA-4082N               , FwRev=HQ04    , SerialNo=K0868EK5201         
 Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
 RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
 BuffType=unknown, BuffSize=0kB, MaxMultSect=0
 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4 
 DMA modes:  mdma0 mdma1 *mdma2 
 AdvancedPM=no
 Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3:  ATA/ATAPI-2,3,4,5

 * signifies the current active mode


ATAPI CD-ROM, with removable media
	Model Number:       HL-DT-ST DVDRAM GMA-4082N               
	Serial Number:      K0868EK5201         
	Firmware Revision:  HQ04    
Standards:
	Likely used CD-ROM ATAPI-1
Configuration:
	DRQ response: 50us.
	Packet size: 12 bytes
Capabilities:
	LBA, IORDY(can be disabled)
	DMA: mdma0 mdma1 *mdma2 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=120ns  IORDY flow control=120ns
HW reset results:
	CBLID- below Vih
	Device num = 0