| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <0e852da646969a2296f66cbc485f278fe1fa9929.1234573847.git.jeremy.fitzhardinge@citrix.com>
Date: Fri, 13 Feb 2009 17:12:05 -0800
From: Jeremy Fitzhardinge <jeremy@...p.org>
To: Ingo Molnar <mingo@...e.hu>
Cc: the arch/x86 maintainers <x86@...nel.org>,
Xen-devel <xen-devel@...ts.xensource.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Yinghai Lu <yinghai@...nel.org>,
Ian Campbell <Ian.Campbell@...rix.com>,
Jeremy Fitzhardinge <jeremy@...p.org>,
Jeremy Fitzhardinge <jeremy.fitzhardinge@...rix.com>
Subject: [PATCH 7/9] xen: direct irq registration to pirq event channels
This patch puts the hooks into place so that when the interrupt
subsystem registers an irq, it gets routed via Xen (if we're running
under Xen).
The first step is to get a gsi for a particular device+pin. We use
the normal acpi interrupt routing to do the mapping.
We reserve enough irq space to fit the hardware interrupt sources in,
so we can allocate the irq == gsi, as we do in the native case;
software events will get allocated irqs above that.
Having allocated an irq, we ask Xen to allocate a vector, and then
bind that pirq/vector to an event channel. When the hardware raises
an interrupt on a vector, Xen signals us on the corresponding event
channel, which gets routed to the irq and delivered to the appropriate
device driver.
This patch does everything except set up the IO APIC pin routing to
the vector.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@...rix.com>
---
arch/x86/include/asm/xen/pci.h | 13 +++++++++++
arch/x86/kernel/acpi/boot.c | 8 ++++++-
arch/x86/xen/Kconfig | 11 +++++++++
arch/x86/xen/Makefile | 1 +
arch/x86/xen/pci.c | 47 ++++++++++++++++++++++++++++++++++++++++
drivers/xen/events.c | 6 ++++-
include/xen/events.h | 8 ++++++
7 files changed, 92 insertions(+), 2 deletions(-)
create mode 100644 arch/x86/include/asm/xen/pci.h
create mode 100644 arch/x86/xen/pci.c
diff --git a/arch/x86/include/asm/xen/pci.h b/arch/x86/include/asm/xen/pci.h
new file mode 100644
index 0000000..0563fc6
--- /dev/null
+++ b/arch/x86/include/asm/xen/pci.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_X86_XEN_PCI_H
+#define _ASM_X86_XEN_PCI_H
+
+#ifdef CONFIG_XEN_DOM0_PCI
+int xen_register_gsi(u32 gsi, int triggering, int polarity);
+#else
+static inline int xen_register_gsi(u32 gsi, int triggering, int polarity)
+{
+ return -1;
+}
+#endif
+
+#endif /* _ASM_X86_XEN_PCI_H */
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 32bacfe..89afbbe 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -42,6 +42,8 @@
#include <asm/mpspec.h>
#include <asm/smp.h>
+#include <asm/xen/pci.h>
+
#include <asm/xen/hypervisor.h>
static int __initdata acpi_force = 0;
@@ -483,9 +485,13 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
*/
int acpi_register_gsi(u32 gsi, int triggering, int polarity)
{
- unsigned int irq;
+ int irq;
unsigned int plat_gsi = gsi;
+ irq = xen_register_gsi(gsi, triggering, polarity);
+ if (irq >= 0)
+ return irq;
+
#ifdef CONFIG_PCI
/*
* Make sure all (legacy) PCI IRQs are set as level-triggered.
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 87b9ab1..ee429df 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -36,3 +36,14 @@ config XEN_DEBUG_FS
help
Enable statistics output and various tuning options in debugfs.
Enabling this option may incur a significant performance overhead.
+
+config XEN_PCI_PASSTHROUGH
+ bool #"Enable support for Xen PCI passthrough devices"
+ depends on XEN && PCI
+ help
+ Enable support for passing PCI devices through to
+ unprivileged domains. (COMPLETELY UNTESTED)
+
+config XEN_DOM0_PCI
+ def_bool y
+ depends on XEN_DOM0 && PCI
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 853d05e..a5fb286 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -12,3 +12,4 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \
obj-$(CONFIG_SMP) += smp.o spinlock.o
obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o
obj-$(CONFIG_XEN_DOM0) += apic.o
+obj-$(CONFIG_XEN_DOM0_PCI) += pci.o
\ No newline at end of file
diff --git a/arch/x86/xen/pci.c b/arch/x86/xen/pci.c
new file mode 100644
index 0000000..f450007
--- /dev/null
+++ b/arch/x86/xen/pci.c
@@ -0,0 +1,47 @@
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+
+#include <asm/pci_x86.h>
+
+#include <asm/xen/hypervisor.h>
+
+#include <xen/interface/xen.h>
+#include <xen/events.h>
+
+#include "xen-ops.h"
+
+int xen_register_gsi(u32 gsi, int triggering, int polarity)
+{
+ int irq;
+
+ if (!xen_domain())
+ return -1;
+
+ printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
+ gsi, triggering, polarity);
+
+ irq = xen_allocate_pirq(gsi);
+
+ printk(KERN_DEBUG "xen: --> irq=%d\n", irq);
+
+ return irq;
+}
+
+void __init xen_setup_pirqs(void)
+{
+#ifdef CONFIG_ACPI
+ int irq;
+
+ /*
+ * Set up acpi interrupt in acpi_gbl_FADT.sci_interrupt.
+ */
+ irq = xen_allocate_pirq(acpi_gbl_FADT.sci_interrupt);
+
+ printk(KERN_INFO "xen: allocated irq %d for acpi %d\n",
+ irq, acpi_gbl_FADT.sci_interrupt);
+
+ /* Blerk. */
+ acpi_gbl_FADT.sci_interrupt = irq;
+#endif
+}
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 3477998..3cf0a1b 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -413,6 +413,7 @@ static unsigned int startup_pirq(unsigned int irq)
struct evtchn_bind_pirq bind_pirq;
struct irq_info *info = info_for_irq(irq);
int evtchn = evtchn_from_irq(irq);
+ int rc;
BUG_ON(info->type != IRQT_PIRQ);
@@ -422,7 +423,8 @@ static unsigned int startup_pirq(unsigned int irq)
bind_pirq.pirq = irq;
/* NB. We are happy to share unless we are probing. */
bind_pirq.flags = probing_irq(irq) ? 0 : BIND_PIRQ__WILL_SHARE;
- if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_pirq, &bind_pirq) != 0) {
+ rc = HYPERVISOR_event_channel_op(EVTCHNOP_bind_pirq, &bind_pirq);
+ if (rc != 0) {
if (!probing_irq(irq))
printk(KERN_INFO "Failed to obtain physical IRQ %d\n",
irq);
@@ -1181,4 +1183,6 @@ void __init xen_init_IRQ(void)
mask_evtchn(i);
irq_ctx_init(smp_processor_id());
+
+ xen_setup_pirqs();
}
diff --git a/include/xen/events.h b/include/xen/events.h
index e5b541d..6fe4863 100644
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -69,4 +69,12 @@ int xen_vector_from_irq(unsigned pirq);
/* Return gsi allocated to pirq */
int xen_gsi_from_irq(unsigned pirq);
+#ifdef CONFIG_XEN_DOM0_PCI
+void xen_setup_pirqs(void);
+#else
+static inline void xen_setup_pirqs(void)
+{
+}
+#endif
+
#endif /* _XEN_EVENTS_H */
--
1.6.0.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists