lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <49977B18.1030303@gmail.com>
Date:	Sat, 14 Feb 2009 20:16:56 -0600
From:	Robert Hancock <hancockrwd@...il.com>
To:	Richard Jonsson <richard_jonsson@...mail.com>
CC:	lkml <linux-kernel@...r.kernel.org>
Subject: Re: Unable to write dvd+r on 3 systems

Richard Jonsson wrote:
> 
> 
> ----------------------------------------
>> Date: Sat, 14 Feb 2009 15:53:15 -0600
>> From: hancockrwd@...il.com
>> To: richard_jonsson@...mail.com
>> CC: linux-kernel@...r.kernel.org
>> Subject: Re: Unable to write dvd+r on 3 systems
>>
>> Richard Jonsson wrote:
>>> It seems I am the last person on earth burning dvd's. I have tried on three different systems, using a mix of growisofs, xfburn, brasero and k3b. They all give the same result for their respective system.
>>>
>>> On system 1 it takes forever to complete the process. The system is completely useless while burning. IO wait is 50% and hardIRQ is 10-20%. If audio is playing at the same time it stutters in a way that it sounds as it's playing slow. Mouse cursor jerks and it takes eons to even open a new terminal.
>>>
>>> On system 2 growisofs will try for half a minute and then fail with a message in dmesg. The disc isn't even touched. Tried homebuilt kernel.org kernels from 2.6.25 to current git with no difference. See attachment "growisofs_system2.txt". I have been able to burn exactly 1 disc in total, which magically started recording immediately.
>>>
>>> System 3 burns at decent speed and always reports success, but about half the time only part of the disc is actually burned. It is visible to the eye, and it will not work. Tried at 4x too.
>> It sounds like you may have multiple problems. System 1 sounds like
>> maybe DMA is not being used for some reason, the dmesg output would be
>> useful. On System 2 it looks like a write timed out, and system 3 is
>> having burn quality problems. System 1 may have a kernel issue that
>> should be looked into, but as for the other two, I would tend to suspect
>> the quality of the discs you are using. There is a lot of crap media out
>> there, and also some burners don't like discs with media codes that they
>> don't have preprogrammed burn strategies for.
> 
> Thanks for your reply.
> 
> System 1 is affected by
> http://bugzilla.kernel.org/show_bug.cgi?id=12309

Not sure if that is related, that's referring to heavy disk write IO 
where yours is CD burning, which is a rather different workload.

> Also, just noticed that it doesn't appear to have udma capability?!
> (see attachment).

Not too unusual for a lot of burners..

> 
> Regarding system 3, should there not be an error raised or some such?
> It appears to complete the process, but halfway through the laser is
> cut?

That's up to the drive. If it chooses not to provide an error to the 
burning software when something goes wrong, there's not much that can be 
done about it. (It's possible the burning software is failing to report 
the error, but that isn't usually the case as far as I've seen.)

> 
> As for the media, I currently use branded discs (tdk), any
> recommendations what to shop for?

Verbatim (MCC or MKM media code) are the ones I usually use. Anything 
made by Taiyo Yuden is fairly well regarded as well. It depends a lot on 
what is available in your area..
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ