root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /boot/vmlinuz-autotest root=/dev/sda1 console=tty0 selinux=0 console=tty S1,19200 noapic IDENT=1234879013 [Linux-bzImage, setup=0x2c00, size=0x280e90] initrd /boot/initrd-autotest [Linux-initrd @ 0x37d8b000, 0x264497 bytes] Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.29-rc5-autotest-next-20090217 (root@ls21b) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Tue Feb 17 19:24:51 IST 2009 Command line: root=/dev/sda1 console=tty0 selinux=0 console=ttyS1,19200 noapic IDENT=1234879013 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffa44c0 (usable) BIOS-e820: 00000000cffa44c0 - 00000000cffa7400 (ACPI data) BIOS-e820: 00000000cffa7400 - 00000000d0000000 (reserved) BIOS-e820: 00000000f4000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) DMI 2.3 present. last_pfn = 0x130000 max_arch_pfn = 0x100000000 last_pfn = 0xcffa4 max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000cffa4000 last_map_addr: cffa4000 end: cffa4000 init_memory_mapping: 0000000100000000-0000000130000000 last_map_addr: 130000000 end: 130000000 RAMDISK: 37d8b000 - 37fef497 ACPI: RSDP 000FDFE0, 0014 (r0 IBM ) ACPI: RSDT CFFA7380, 0038 (r1 IBM SERLEWIS 1000 IBM 45444F43) ACPI: FACP CFFA72C0, 0084 (r2 IBM SERLEWIS 1000 IBM 45444F43) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) FADT: X_PM1b_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT CFFA44C0, 2B02 (r1 IBM SERLEWIS 1000 INTL 2002025) ACPI: FACS CFFA7040, 0040 ACPI: APIC CFFA7200, 0090 (r1 IBM SERLEWIS 1000 IBM 45444F43) ACPI: SRAT CFFA7100, 00E8 (r1 AMD HAMMER 1 AMD 1) ACPI: HPET CFFA70C0, 0038 (r1 IBM SERLEWIS 1000 IBM 45444F43) ACPI: MCFG CFFA7080, 003C (r1 IBM SERLEWIS 1000 IBM 45444F43) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-d0000000 SRAT: Node 0 PXM 0 100000000-130000000 Bootmem setup node 0 0000000000000000-0000000130000000 NODE_DATA [000000000000a640 - 000000000001063f] bootmap [0000000000011000 - 0000000000036fff] pages 26 (8 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000159ac80] TEXT DATA BSS ==> [0000200000 - 000159ac80] #3 [0037d8b000 - 0037fef497] RAMDISK ==> [0037d8b000 - 0037fef497] #4 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000] #5 [000159b000 - 0001c1e000] PGTABLE ==> [000159b000 - 0001c1e000] #6 [0001c1e000 - 0001d9f000] PGTABLE ==> [0001c1e000 - 0001d9f000] #7 [0000008000 - 000000a640] MEMNODEMAP ==> [0000008000 - 000000a640] found SMP MP-table at [ffff88000009d140] 9d140 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x000cffa4 0: 0x00100000 -> 0x00130000 Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x488 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: Skipping IOAPIC probe due to 'noapic' option. Using ACPI for processor (LAPIC) configuration information ACPI: HPET id: 0x1166a201 base: 0xfed00000 Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: IBM ENSW MPTABLE: Product ID: LEWIS SMP MPTABLE: APIC at: 0xFEE00000 I/O APIC #14 Version 17 at 0xFEC00000. I/O APIC #13 Version 17 at 0xFEC02000. Processors: 4 SMP: Allowing 4 CPUs, 0 hotplug CPUs Allocating PCI resources starting at d4000000 (gap: d0000000:24000000) NR_CPUS:255 nr_cpumask_bits:255 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Allocating 81920 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 1021527 Policy zone: Normal Kernel command line: root=/dev/sda1 console=tty0 selinux=0 console=ttyS1,19200 noapic IDENT=1234879013 Initializing CPU#0 Experimental hierarchical RCU implementation. RCU-based detection of stalled CPUs is enabled. Experimental hierarchical RCU init done. NR_IRQS:4352 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2200.007 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS1] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 4607 kB per task-struct memory footprint: 1920 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- allocated 41943040 bytes of page_cgroup please try cgroup_disable=memory option if you don't want Checking aperture... No AGP bridge found Node 0: aperture @ f4000000 size 64 MB Node 1: aperture @ f4000000 size 64 MB Memory: 4028404k/4980736k available (3259k kernel code, 787196k absent, 165136k reserved, 2441k data, 428k init) ODEBUG: selftest passed HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. <7>spurious 8259A interrupt: IRQ7. 4400.01 BogoMIPS (lpj=2200007) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20090123 ACPI: setting ELCR to 0200 (from 06a0) Setting APIC routing to flat CPU0: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02 APIC calibration not consistent with PM-Timer: 805ms instead of 100ms APIC delta adjusted to PM-Timer: 8523016 (68659200) lockdep: fixing up alternatives. Booting processor 1 APIC 0x2 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 30001.05 BogoMIPS (lpj=15000527) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/0x2 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02 lockdep: fixing up alternatives. Booting processor 2 APIC 0x1 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 30001.08 BogoMIPS (lpj=15000541) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02 lockdep: fixing up alternatives. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 30001.02 BogoMIPS (lpj=15000511) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/0x3 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU3: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02 Brought up 4 CPUs Total of 4 processors activated (94403.17 BogoMIPS). net_namespace: 1992 bytes NET: Registered protocol family 16 TOM: 00000000d0000000 aka 3328M TOM2: 0000000130000000 aka 4864M ACPI: bus type pci registered PCI: MCFG configuration 0: base fa000000 segment 0 buses 0 - 8 PCI: MCFG area at fa000000 reserved in E820 PCI: Using MMCONFIG at fa000000 - fa8fffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using PIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: Enabling HT MSI Mapping pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:03.2: PME# disabled pci 0000:02:04.0: PME# supported from D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:02:05.0: PME# supported from D3hot D3cold pci 0000:02:05.0: PME# disabled ACPI: PCI Interrupt Link [LPAC] (IRQs *9) ACPI: PCI Interrupt Link [LPUS] (IRQs *5) ACPI: PCI Interrupt Link [LPID] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LPSA] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LPSM] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP00] (IRQs *10) ACPI: PCI Interrupt Link [LP01] (IRQs *7) ACPI: PCI Interrupt Link [LP02] (IRQs *10) ACPI: PCI Interrupt Link [LP03] (IRQs *9) ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP06] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP08] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP09] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP0A] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP0B] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP0C] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP0D] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP0E] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP0F] (IRQs) *0, disabled. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ f4000000 size 65536 KB init_memory_mapping: 00000000f4000000-00000000f8000000 last_map_addr: f8000000 end: f8000000 PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x510-0x517 has been reserved system 00:01: ioport range 0x504-0x507 has been reserved system 00:01: ioport range 0x500-0x503 has been reserved system 00:01: ioport range 0x520-0x53f has been reserved system 00:01: ioport range 0x540-0x547 has been reserved system 00:01: ioport range 0x460-0x461 has been reserved system 00:0a: ioport range 0x400-0x47f could not be reserved system 00:0a: ioport range 0x480-0x4cf has been reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0a: ioport range 0x4d6-0x4e0 has been reserved system 00:0a: ioport range 0x540-0x55f could not be reserved system 00:0a: ioport range 0x600-0x600 has been reserved system 00:0a: ioport range 0xc00-0xc01 has been reserved system 00:0a: ioport range 0xc06-0xca6 has been reserved system 00:0a: ioport range 0xca8-0xca8 has been reserved system 00:0a: ioport range 0xcac-0xcac has been reserved system 00:0a: ioport range 0xcb0-0xcb0 has been reserved system 00:0a: ioport range 0xcb4-0xcb4 has been reserved system 00:0a: ioport range 0xcc0-0xcdf has been reserved system 00:0a: iomem range 0xf4000000-0xfbffffff could not be reserved system 00:0a: iomem range 0xfec00000-0xffffffff has been reserved pci 0000:01:0d.0: PCI bridge, secondary bus 0000:02 pci 0000:01:0d.0: IO window: disabled pci 0000:01:0d.0: MEM window: 0xe2000000-0xe6ffffff pci 0000:01:0d.0: PREFETCH window: disabled pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xe2000000-0xe7ffffff pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:03 pci 0000:00:06.0: IO window: 0x4000-0x4fff pci 0000:00:06.0: MEM window: 0xdf000000-0xe00fffff pci 0000:00:06.0: PREFETCH window: 0x000000d4000000-0x000000d40fffff pci 0000:00:07.0: PCI bridge, secondary bus 0000:04 pci 0000:00:07.0: IO window: disabled pci 0000:00:07.0: MEM window: 0xdd000000-0xddffffff pci 0000:00:07.0: PREFETCH window: disabled pci 0000:00:08.0: PCI bridge, secondary bus 0000:05 pci 0000:00:08.0: IO window: disabled pci 0000:00:08.0: MEM window: 0xdc000000-0xdcffffff pci 0000:00:08.0: PREFETCH window: disabled pci 0000:00:09.0: PCI bridge, secondary bus 0000:06 pci 0000:00:09.0: IO window: disabled pci 0000:00:09.0: MEM window: 0xdb000000-0xdbffffff pci 0000:00:09.0: PREFETCH window: disabled pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07 pci 0000:00:0a.0: IO window: disabled pci 0000:00:0a.0: MEM window: 0xda000000-0xdaffffff pci 0000:00:0a.0: PREFETCH window: disabled pci 0000:00:0b.0: PCI bridge, secondary bus 0000:08 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: 0xd9000000-0xd9ffffff pci 0000:00:0b.0: PREFETCH window: disabled NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is debug: unmapping init memory ffff880037d8b000..ffff880037ff0000 ====[ backtrace testing ]=========== Testing a backtrace from process context. The following trace is a kernel self test and not a bug! Pid: 1, comm: swapper Not tainted 2.6.29-rc5-autotest-next-20090217 #1 Call Trace: [] ? __percpu_alloc_mask+0xfb/0x137 [] backtrace_regression_test+0x38/0xf7 [] ? crash_notes_memory_init+0x0/0x3d [] do_one_initcall+0x56/0x130 [] ? register_irq_proc+0xae/0xca [] ? writenote+0x8b/0xb8 [] kernel_init+0x1a2/0x1f9 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? up+0xf/0x39 [] ? kernel_init+0x0/0x1f9 [] ? child_rip+0x0/0x20 Testing a backtrace from irq context. The following trace is a kernel self test and not a bug! Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.29-rc5-autotest-next-20090217 #1 Call Trace: [] ? trace_hardirqs_on_caller+0x11a/0x15f [] backtrace_test_irq_callback+0x9/0x17 [] tasklet_action+0x6f/0xce [] __do_softirq+0x80/0x159 [] call_softirq+0x1c/0x34 [] do_softirq+0x39/0x8e [] ksoftirqd+0x94/0xff [] ? ksoftirqd+0x0/0xff [] kthread+0x49/0x78 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? finish_task_switch+0x3b/0xe0 [] ? kthread+0x0/0x78 [] ? child_rip+0x0/0x20 Testing a saved backtrace. The following trace is a kernel self test and not a bug! [] save_stack_trace+0x2a/0x48 [] backtrace_regression_test+0xd6/0xf7 [] do_one_initcall+0x56/0x130 [] kernel_init+0x1a2/0x1f9 [] child_rip+0xa/0x20 [] 0xffffffffffffffff ====[ end of backtrace testing ]==== audit: initializing netlink socket (disabled) type=2000 audit(1234879200.554:1): initialized rcu-torture:--- Start of test: nreaders=8 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7867 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:08.0: Found enabled HT MSI Mapping pci 0000:00:09.0: Found enabled HT MSI Mapping pci 0000:00:0a.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping pci_hotplug: PCI Hot Plug PCI Core version: 0.5 processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) processor ACPI_CPU:02: registered as cooling_device2 ACPI: Processor [CPU2] (supports 8 throttling states) processor ACPI_CPU:03: registered as cooling_device3 ACPI: Processor [CPU3] (supports 8 throttling states) Real Time Clock Driver v1.12b Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A erial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 17 powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 2218 processors (4 cpu cores) (version 2.20.00) ------------[ cut here ]------------ WARNING: at arch/x86/kernel/cpu/cpufreq/powernow-k8.c:1255 powernowk8_cpu_init+0x493/0xd22() Hardware name: BladeCenter LS21 -[79716AA]- [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor. Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.29-rc5-autotest-next-20090217 #1 Call Trace: [] warn_slowpath+0xd3/0xf2 [] ? up+0x34/0x39 [] ? mark_held_locks+0x49/0x69 [] ? __mutex_unlock_slowpath+0x117/0x123 [] ? trace_hardirqs_on_caller+0x134/0x15f [] ? trace_hardirqs_on+0xd/0xf [] ? mutex_unlock+0x9/0xb [] ? acpi_processor_register_performance+0x3a9/0x3da [] ? kmem_cache_alloc+0xcc/0xfa [] ? trace_hardirqs_on_caller+0x134/0x15f [] ? __bitmap_weight+0x78/0x8d [] powernowk8_cpu_init+0x493/0xd22 [] ? lockdep_init_map+0x9c/0x467 [] ? lock_policy_rwsem_write+0x46/0xaf [] cpufreq_add_dev+0x1c6/0x7af [] ? __lock_acquire+0x773/0x7de [] ? mark_held_locks+0x49/0x69 [] ? mutex_lock_nested+0x29b/0x2b4 [] ? trace_hardirqs_on_caller+0x134/0x15f [] ? debug_mutex_free_waiter+0x53/0x57 [] ? mutex_lock_nested+0x2a7/0x2b4 [] ? sysdev_driver_register+0x75/0x10d [] sysdev_driver_register+0xaf/0x10d [] cpufreq_register_driver+0xc7/0x1f6 [] powernowk8_init+0xc5/0xd1 [] ? powernowk8_init+0x0/0xd1 [] do_one_initcall+0x56/0x130 [] ? register_irq_proc+0xae/0xca [] ? writenote+0x8b/0xb8 [] kernel_init+0x1a2/0x1f9 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? up+0xf/0x39 [] ? kernel_init+0x0/0x1f9 [] ? child_rip+0x0/0x20 ---[ end trace dd3dd2a755e71b32 ]--- registered taskstats version 1 debug: unmapping init memory ffffffff808b1000..ffffffff8091c000 Write protecting the kernel read-only data: 4820k Testing CPA: undo ffffffff80209000-ffffffff806be000 Testing CPA: again Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Louhci_hcd: USB Universal Host Controller Interface driver ading uhci-hcd.kohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver o module LoadinACPI: PCI Interrupt Link [LPUS] enabled at IRQ 5 g ohci-hcd.ko moohci_hcd 0000:00:03.0: PCI INT A -> Link[LPUS] -> GSI 5 (level, low) -> IRQ 5 dule ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 5, io mem 0xf3fff000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd 0000:00:03.1: PCI INT A -> Link[LPUS] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.1: irq 5, io mem 0xf3ffe000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Loading ehci-hcdehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver .ko module Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:03.2: PCI INT A -> Link[LPUS] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd 0000:00:03.2: EHCI Host Controller ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:03.2: irq 5, io mem 0xf3ffd000 ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected Loading jbd.ko module Loading ext3.ko module Loading scsi_mod.ko module SCSI subsystem initialized Loading sd_mod.ko module Driver 'sd' needs updating - please use bus_type methods Loading scsi_transport_sas.ko module Loading mptbase.ko module Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Loading mptscsih.ko module Loading mptsas.ko module Fusion MPT SAS Host driver 3.04.07 ACPI: PCI Interrupt Link [LP03] enabled at IRQ 9 mptsas 0000:03:04.0: PCI INT A -> Link[LP03] -> GSI 9 (level, low) -> IRQ 9 mptbase: ioc0: Initiating bringup ioc0: LSISAS1064 A3: Capabilities={Initiator} usb 3-4: new high speed USB device using ehci_hcd and address 2 usb 3-4: configuration #1 chosen from 1 choice hub 3-4:1.0: USB hub found hub 3-4:1.0: 2 ports detected ODEBUG: object is on stack, but not annotated ------------[ cut here ]------------ WARNING: at lib/debugobjects.c:253 __debug_object_init+0x2bb/0x34d() Hardware name: BladeCenter LS21 -[79716AA]- Modules linked in: mptsas(+) mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd Pid: 20, comm: work_on_cpu/0 Tainted: G W 2.6.29-rc5-autotest-next-20090217 #1 Call Trace: [] warn_slowpath+0xd3/0xf2 [] ? number+0x115/0x21f [] ? _read_lock_irq+0x35/0x41 [] ? _read_lock_irqsave+0x47/0x4d [] ? zisofs_readpage+0x178/0x92e [] ? printk+0x67/0x69 [] ? __debug_object_init+0xd8/0x34d [] __debug_object_init+0x2bb/0x34d [] debug_object_init+0x14/0x19 [] init_timer_key+0x22/0x38 [] mpt_config+0x160/0x289 [mptbase] [] ? trace_hardirqs_on+0xd/0xf [] mpt_findImVolumes+0x88/0x76a [mptbase] [] ? destroy_timer_on_stack+0x10/0x12 [] ? schedule_timeout+0xb1/0xcd [] ? process_timeout+0x0/0xb [] ? schedule_timeout_uninterruptible+0x19/0x1b [] ? msleep+0x14/0x1e [] ? WaitForDoorbellInt+0x3f/0x91 [mptbase] [] ? _spin_unlock_irqrestore+0x3f/0x47 [] ? trace_hardirqs_on_caller+0x1f/0x15f [] ? debug_mutex_init+0x31/0x3d [] mpt_do_ioc_recovery+0x6f1/0x16ab [mptbase] [] ? flat_send_IPI_mask+0x78/0x8a [] ? _spin_unlock_irq+0x2b/0x31 [] ? trace_hardirqs_on_caller+0x1f/0x15f [] ? trace_hardirqs_on+0xd/0xf [] ? _spin_unlock_irq+0x2b/0x31 [] ? wait_for_common+0xd1/0x11e [] ? wait_for_common+0x10c/0x11e [] ? default_wake_function+0x0/0xf [] ? kthread_create+0x104/0x117 [] ? worker_thread+0x0/0xe8 [] ? trace_hardirqs_off+0xd/0xf [] ? flat_send_IPI_mask+0x78/0x8a [] ? _spin_unlock_irqrestore+0x38/0x47 [] ? _spin_unlock_irqrestore+0x3f/0x47 [] ? trace_hardirqs_on_caller+0x1f/0x15f [] ? trace_hardirqs_on+0xd/0xf [] ? __up_read+0x7a/0x83 [] ? up_read+0x26/0x2b [] ? pci_get_slot+0x4b/0x90 [] mpt_attach+0x994/0xb07 [mptbase] [] ? do_work_for_cpu+0x0/0x1b [] mptsas_probe+0x1a/0x439 [mptsas] [] ? do_work_for_cpu+0x0/0x1b [] local_pci_probe+0x12/0x16 [] do_work_for_cpu+0x13/0x1b [] run_workqueue+0x12c/0x236 [] ? run_workqueue+0xd5/0x236 [] ? trace_hardirqs_on+0xd/0xf [] ? trace_hardirqs_on+0xd/0xf [] worker_thread+0xdb/0xe8 [] ? autoremove_wake_function+0x0/0x38 [] ? worker_thread+0x0/0xe8 [] kthread+0x49/0x78 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? finish_task_switch+0x3b/0xe0 [] ? kthread+0x0/0x78 [] ? child_rip+0x0/0x20 ---[ end trace dd3dd2a755e71b34 ]--- ODEBUG: object is on stack, but not annotated ------------[ cut here ]------------ WARNING: at lib/debugobjects.c:253 __debug_object_init+0x2bb/0x34d() Hardware name: BladeCenter LS21 -[79716AA]- Modules linked in: mptsas(+) mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd Pid: 20, comm: work_on_cpu/0 Tainted: G W 2.6.29-rc5-autotest-next-20090217 #1 Call Trace: [] warn_slowpath+0xd3/0xf2 [] ? number+0x115/0x21f [] ? _read_lock_irq+0x35/0x41 [] ? _read_lock_irqsave+0x47/0x4d [] ? printk+0x67/0x69 [] ? __debug_object_init+0xd8/0x34d [] __debug_object_init+0x2bb/0x34d [] debug_object_init+0x14/0x19 [] init_timer_key+0x22/0x38 [] mpt_config+0x160/0x289 [mptbase] [] ? trace_hardirqs_on_caller+0x1f/0x15f [] ? trace_hardirqs_on+0xd/0xf [] mpt_findImVolumes+0x22d/0x76a [mptbase] [] ? destroy_timer_on_stack+0x10/0x12 [] ? schedule_timeout+0xb1/0xcd [] ? process_timeout+0x0/0xb [] ? schedule_timeout_uninterruptible+0x19/0x1b [] ? msleep+0x14/0x1e [] ? WaitForDoorbellInt+0x3f/0x91 [mptbase] [] ? mpt_timer_expired+0x0/0x2d [mptbase] [] mpt_do_ioc_recovery+0x6f1/0x16ab [mptbase] [] ? flat_send_IPI_mask+0x78/0x8a [] ? _spin_unlock_irq+0x2b/0x31 [] ? trace_hardirqs_on_caller+0x1f/0x15f [] ? trace_hardirqs_on+0xd/0xf [] ? _spin_unlock_irq+0x2b/0x31 [] ? wait_for_common+0xd1/0x11e [] ? wait_for_common+0x10c/0x11e [] ? default_wake_function+0x0/0xf [] ? kthread_create+0x104/0x117 [] ? worker_thread+0x0/0xe8 [] ? trace_hardirqs_off+0xd/0xf [] ? flat_send_IPI_mask+0x78/0x8a [] ? _spin_unlock_irqrestore+0x38/0x47 [] ? _spin_unlock_irqrestore+0x3f/0x47 [] ? trace_hardirqs_on_caller+0x1f/0x15f [] ? trace_hardirqs_on+0xd/0xf [] ? __up_read+0x7a/0x83 [] ? up_read+0x26/0x2b [] ? pci_get_slot+0x4b/0x90 [] mpt_attach+0x994/0xb07 [mptbase] [] ? do_work_for_cpu+0x0/0x1b [] mptsas_probe+0x1a/0x439 [mptsas] [] ? do_work_for_cpu+0x0/0x1b [] local_pci_probe+0x12/0x16 [] do_work_for_cpu+0x13/0x1b [] run_workqueue+0x12c/0x236 [] ? run_workqueue+0xd5/0x236 [] ? trace_hardirqs_on+0xd/0xf [] ? trace_hardirqs_on+0xd/0xf [] worker_thread+0xdb/0xe8 [] ? autoremove_wake_function+0x0/0x38 [] ? worker_thread+0x0/0xe8 [] kthread+0x49/0x78 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? finish_task_switch+0x3b/0xe0 [] ? kthread+0x0/0x78 [] ? child_rip+0x0/0x20 ---[ end trace dd3dd2a755e71b35 ]--- ODEBUG: object is on stack, but not annotated ------------[ cut here ]------------ WARNING: at lib/debugobjects.c:253 __debug_object_init+0x2bb/0x34d() Hardware name: BladeCenter LS21 -[79716AA]- Modules linked in: mptsas(+) mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd Pid: 20, comm: work_on_cpu/0 Tainted: G W 2.6.29-rc5-autotest-next-20090217 #1 Call Trace: [] warn_slowpath+0xd3/0xf2 [] ? trace_hardirqs_on+0xd/0xf [] ? free_hot_page+0xb/0xd [] ? __free_pages+0x23/0x2c [] ? free_pages+0x45/0x4a [] ? gart_free_coherent+0x37/0x3c [] ? printk+0x67/0x69 [] ? __debug_object_init+0xd8/0x34d [] __debug_object_init+0x2bb/0x34d [] debug_object_init+0x14/0x19 [] init_timer_key+0x22/0x38 [] mpt_config+0x160/0x289 [mptbase] [] mpt_do_ioc_recovery+0x1185/0x16ab [mptbase] [] ? flat_send_IPI_mask+0x78/0x8a [] ? _spin_unlock_irq+0x2b/0x31 [] ? trace_hardirqs_on_caller+0x1f/0x15f [] ? trace_hardirqs_on+0xd/0xf [] ? _spin_unlock_irq+0x2b/0x31 [] ? wait_for_common+0xd1/0x11e [] ? wait_for_common+0x10c/0x11e [] ? default_wake_function+0x0/0xf [] ? kthread_create+0x104/0x117 [] ? worker_thread+0x0/0xe8 [] ? trace_hardirqs_off+0xd/0xf [] ? flat_send_IPI_mask+0x78/0x8a [] ? _spin_unlock_irqrestore+0x38/0x47 [] ? _spin_unlock_irqrestore+0x3f/0x47 [] ? trace_hardirqs_on_caller+0x1f/0x15f [] ? trace_hardirqs_on+0xd/0xf [] ? __up_read+0x7a/0x83 [] ? up_read+0x26/0x2b [] ? pci_get_slot+0x4b/0x90 [] mpt_attach+0x994/0xb07 [mptbase] [] ? do_work_for_cpu+0x0/0x1b [] mptsas_probe+0x1a/0x439 [mptsas] [] ? do_work_for_cpu+0x0/0x1b [] local_pci_probe+0x12/0x16 [] do_work_for_cpu+0x13/0x1b [] run_workqueue+0x12c/0x236 [] ? run_workqueue+0xd5/0x236 [] ? trace_hardirqs_on+0xd/0xf [] ? trace_hardirqs_on+0xd/0xf [] worker_thread+0xdb/0xe8 [] ? autoremove_wake_function+0x0/0x38 [] ? worker_thread+0x0/0xe8 [] kthread+0x49/0x78 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? finish_task_switch+0x3b/0xe0 [] ? kthread+0x0/0x78 [] ? child_rip+0x0/0x20 ---[ end trace dd3dd2a755e71b36 ]--- ODEBUG: object is on stack, but not annotated ------------[ cut here ]------------ WARNING: at lib/debugobjects.c:253 __debug_object_init+0x2bb/0x34d() Hardware name: BladeCenter LS21 -[79716AA]- Modules linked in: mptsas(+) mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd Pid: 20, comm: work_on_cpu/0 Tainted: G W 2.6.29-rc5-autotest-next-20090217 #1 Call Trace: [] warn_slowpath+0xd3/0xf2 [] ? trace_hardirqs_on+0xd/0xf [] ? free_hot_page+0xb/0xd [] ? __free_pages+0x23/0x2c [] ? printk+0x67/0x69 [] ? __debug_object_init+0xd8/0x34d [] __debug_object_init+0x2bb/0x34d [] debug_object_init+0x14/0x19 [] init_timer_key+0x22/0x38 [] mpt_config+0x160/0x289 [mptbase] [] ? free_hot_page+0xb/0xd [] ? __free_pages+0x23/0x2c [] ? free_pages+0x45/0x4a [] mpt_do_ioc_recovery+0x1356/0x16ab [mptbase] [] ? flat_send_IPI_mask+0x78/0x8a [] ? _spin_unlock_irq+0x2b/0x31 [] ? mpt_timer_expired+0x0/0x2d [mptbase] [] ? kthread_create+0x104/0x117 [] ? worker_thread+0x0/0xe8 [] ? trace_hardirqs_off+0xd/0xf [] ? flat_send_IPI_mask+0x78/0x8a [] ? _spin_unlock_irqrestore+0x38/0x47 [] ? _spin_unlock_irqrestore+0x3f/0x47 [] ? trace_hardirqs_on_caller+0x1f/0x15f [] ? trace_hardirqs_on+0xd/0xf [] ? __up_read+0x7a/0x83 [] ? up_read+0x26/0x2b [] ? pci_get_slot+0x4b/0x90 [] mpt_attach+0x994/0xb07 [mptbase] [] ? do_work_for_cpu+0x0/0x1b [] mptsas_probe+0x1a/0x439 [mptsas] [] ? do_work_for_cpu+0x0/0x1b [] local_pci_probe+0x12/0x16 [] do_work_for_cpu+0x13/0x1b [] run_workqueue+0x12c/0x236 [] ? run_workqueue+0xd5/0x236 [] ? trace_hardirqs_on+0xd/0xf [] ? trace_hardirqs_on+0xd/0xf [] worker_thread+0xdb/0xe8 [] ? autoremove_wake_function+0x0/0x38 [] ? worker_thread+0x0/0xe8 [] kthread+0x49/0x78 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? finish_task_switch+0x3b/0xe0 [] ? kthread+0x0/0x78 [] ? child_rip+0x0/0x20 ---[ end trace dd3dd2a755e71b37 ]--- scsi0 : ioc0: LSISAS1064 A3, FwRev=000a0f00h, Ports=1, MaxQ=511, IRQ=9 ODEBUG: object is on stack, but not annotated ------------[ cut here ]------------ WARNING: at lib/debugobjects.c:253 __debug_object_init+0x2bb/0x34d() Hardware name: BladeCenter LS21 -[79716AA]- Modules linked in: mptsas(+) mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd Pid: 20, comm: work_on_cpu/0 Tainted: G W 2.6.29-rc5-autotest-next-20090217 #1 Call Trace: [] warn_slowpath+0xd3/0xf2 [] ? zisofs_readpage+0x476/0x92e [] ? string+0x3d/0xa2 [] ? string+0x3d/0xa2 [] ? printk+0x67/0x69 [] ? __debug_object_init+0xd8/0x34d [] __debug_object_init+0x2bb/0x34d [] debug_object_init+0x14/0x19 [] init_timer_key+0x22/0x38 [] mpt_config+0x160/0x289 [mptbase] [] ? trace_hardirqs_on_caller+0x1f/0x15f [] ? trace_hardirqs_on+0xd/0xf [] mptsas_probe_hba_phys+0x8e/0x8b3 [mptsas] [] ? trace_hardirqs_on_caller+0x1f/0x15f [] ? trace_hardirqs_on+0xd/0xf [] ? proc_register+0xb9/0x11a [] ? trace_hardirqs_off+0xd/0xf [] ? mutex_lock_nested+0x29b/0x2b4 [] ? trace_hardirqs_on_caller+0x1f/0x15f [] ? mutex_lock_nested+0x2a7/0x2b4 [] ? mptsas_probe+0x398/0x439 [mptsas] [] mptsas_probe+0x3a0/0x439 [mptsas] [] ? do_work_for_cpu+0x0/0x1b [] local_pci_probe+0x12/0x16 [] do_work_for_cpu+0x13/0x1b [] run_workqueue+0x12c/0x236 [] ? run_workqueue+0xd5/0x236 [] ? trace_hardirqs_on+0xd/0xf [] ? trace_hardirqs_on+0xd/0xf [] worker_thread+0xdb/0xe8 [] ? autoremove_wake_function+0x0/0x38 [] ? worker_thread+0x0/0xe8 [] kthread+0x49/0x78 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? finish_task_switch+0x3b/0xe0 [] ? kthread+0x0/0x78 [] ? child_rip+0x0/0x20 ---[ end trace dd3dd2a755e71b38 ]--- scsi 0:0:0:0: Direct-Access IBM-ESXS MAY2073RC T107 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 143374000 512-byte hardware sectors: (73.4 GB/68.3 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 143374000 512-byte hardware sectors: (73.4 GB/68.3 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk Loading usb-storInitializing USB Mass Storage driver... age.ko module usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Waiting for driver initialization. Waiting for driver initialization. Scanning and configuring dmraid supported devices Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys INIT: version 2.86 booting Welcome to Red Hat Enterprise Linux Server Press 'I' to enter interactive startup. Setting clock (utc): Tue Feb 17 19:31:00 IST 2009 [ OK ] Starting udev: [ OK ] Loading default keymap (us): [ OK ] Setting hostname ls21b: [ OK ] No devices found Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 /1: clean, 599737/10246368 files, 6014197/10239421 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Starting background readahead: [ OK ] Applying ip6tables firewall rules: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth1: [ OK ] Starting auditd: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting irqbalance: [ OK ] Starting portmap: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: FATAL: Module sunrpc not found. FATAL: Error running install command for sunrpc Error: RPC MTAB does not exist. Starting system message bus: [ OK ] Starting Bluetooth services:[ OK ] [ OK ] Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: [ OK ] Starting autofs: Loading autofs4: [ OK ] Starting automount: [ OK ] [ OK ] Starting acpi daemon: [ OK ] Starting sshd: [ OK ] Starting cups: [ OK ] Starting xinetd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] Starting yum-updatesd: [ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: [ OK ] Starting smartd: [ OK ] Red Hat Enterprise Linux Server release 5.1 (Tikanga) Kernel 2.6.29-rc5-autotest-next-20090217 on an x86_64 ls21b login: -- 0:conmux-control -- time-stamp -- Feb/17/09 6:02:53 --