| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20090220074531.GF8151@localhost.localdomain>
Date: Thu, 19 Feb 2009 23:45:31 -0800
From: Josh Hunt <josh@...lex86.org>
To: sam@...nborg.org
Cc: linux-kernel@...r.kernel.org, kiran@...lex86.org, mingo@...e.hu,
linux-kbuild@...r.kernel.org
Subject: [PATCHv2] Fix 'make rpm' when CONFIG_LOCALVERSION_AUTO=y and using
SCM tree
Updated patch with Sam's fixes as per this discussion:
http://lkml.org/lkml/2009/2/15/18
Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel
source tree under SCM. This is due to KERNELRELEASE being different when the
initial make is run and when make is run from rpmbuild.
mkspec creates kernel.spec using KERNELRELEASE:
<mkspec>
echo "%files"
echo '%defattr (-, root, root)'
echo "%dir /lib/modules"
echo "/lib/modules/$KERNELRELEASE"
echo "/lib/firmware"
echo "/boot/*"
echo ""
</mkspec>
When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any
additional version info from SCM. Next, the srctree is tarred up and SCM
information is excluded.
rpmbuild reruns make and in the process generates a new
include/config/kernel.release and thus a new KERNELRELEASE. However this time
the SCM information is gone so KERNELRELEASE no longer has the additional
version information. When "make modules_install" runs, it uses the new
KERNELRELEASE value to determine where to install the modules. This conflicts
with where the spec file assumes they are going because of the mis-matching
KERNELRELEASE versions.
<snippet>
+ INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root
+ make -j16 modules_install
INSTALL crypto/aead.ko
INSTALL crypto/cbc.ko
INSTALL crypto/chainiv.ko
INSTALL crypto/crc32c.ko
INSTALL crypto/crypto_algapi.ko
INSTALL crypto/crypto_blkcipher.ko
INSTALL crypto/crypto_hash.ko
INSTALL crypto/cryptomgr.ko
INSTALL crypto/ecb.ko
INSTALL crypto/eseqiv.ko
INSTALL crypto/krng.ko
INSTALL crypto/md5.ko
INSTALL crypto/pcbc.ko
INSTALL crypto/rng.ko
INSTALL drivers/block/cciss.ko
INSTALL drivers/hid/hid-dummy.ko
INSTALL drivers/scsi/iscsi_tcp.ko
INSTALL drivers/scsi/libiscsi.ko
INSTALL drivers/scsi/libiscsi_tcp.ko
INSTALL drivers/scsi/scsi_transport_iscsi.ko
INSTALL drivers/scsi/scsi_wait_scan.ko
INSTALL fs/lockd/lockd.ko
INSTALL fs/nfs/nfs.ko
INSTALL fs/nfsd/nfsd.ko
INSTALL lib/libcrc32c.ko
INSTALL net/sunrpc/sunrpc.ko
DEPMOD 2.6.29-rc4-tip
+ cp arch/x86/boot/bzImage
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422
+ cp System.map
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422
+ cp .config
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422
+ cp vmlinux vmlinux.orig
+ bzip2 -9 vmlinux
+ mv vmlinux.bz2
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2
+ mv vmlinux.orig vmlinux
+ /usr/lib/rpm/brp-compress
Processing files: kernel-2.6.29rc4tip01479g5d85422-2
error: File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422
RPM build errors:
File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422
make[1]: *** [rpm] Error 1
make: *** [rpm] Error 2
</snippet>
I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar
files, both with and without CONFIG_LOCALVERSION_AUTO=y.
Signed-off-by: Josh Hunt <josh@...lex86.org>
---
Index: linux-2.6/Makefile
===================================================================
--- linux-2.6.orig/Makefile 2009-02-16 17:07:10.000000000 -0800
+++ linux-2.6/Makefile 2009-02-19 23:13:31.000000000 -0800
@@ -903,12 +903,18 @@ localver = $(subst $(space),, $(string)
# and if the SCM is know a tag from the SCM is appended.
# The appended tag is determined by the SCM used.
#
-# Currently, only git is supported.
-# Other SCMs can edit scripts/setlocalversion and add the appropriate
-# checks as needed.
+# .scmversion is used when generating rpm packages so we do not loose
+# the version information from the SCM when we do the build of the
kernel
+# from the copied source
ifdef CONFIG_LOCALVERSION_AUTO
- _localver-auto = $(shell $(CONFIG_SHELL) \
- $(srctree)/scripts/setlocalversion
$(srctree))
+
+ifeq ($(wildcard .scmversion),)
+ _localver-auto = $(shell $(CONFIG_SHELL) \
+ $(srctree)/scripts/setlocalversion
$(srctree))
+else
+ _localver-auto = $(shell cat .scmversion 2> /dev/null)
+endif
+
localver-auto = $(LOCALVERSION)$(_localver-auto)
endif
Index: linux-2.6/scripts/package/Makefile
===================================================================
--- linux-2.6.orig/scripts/package/Makefile 2009-02-16
17:07:10.000000000 -0800
+++ linux-2.6/scripts/package/Makefile 2009-02-19 23:13:31.000000000
-0800
@@ -35,9 +35,10 @@ $(objtree)/kernel.spec: $(MKSPEC) $(srct
rpm-pkg rpm: $(objtree)/kernel.spec FORCE
$(MAKE) clean
$(PREV) ln -sf $(srctree) $(KERNELPATH)
+ $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion >
$(objtree)/.scmversion
$(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz
$(KERNELPATH)/.
$(PREV) rm $(KERNELPATH)
-
+ rm -f $(objtree)/.scmversion
set -e; \
$(CONFIG_SHELL) $(srctree)/scripts/mkversion >
$(objtree)/.tmp_version
set -e; \
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists