lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <49A272A3.5040405@trash.net>
Date:	Mon, 23 Feb 2009 10:55:47 +0100
From:	Patrick McHardy <kaber@...sh.net>
To:	Wolfgang Grandegger <wg@...ndegger.com>
CC:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	Oliver Hartkopp <oliver.hartkopp@...kswagen.de>
Subject: Re: [PATCH 3/8] can: CAN Network device driver and SYSFS interface

Wolfgang Grandegger wrote:
> Patrick McHardy wrote:
>> Is sysfs really the best choice for this? It has the usual problems,
>> you can't change multiple parameters at once atomically. Now, I don't
>> know whether this is actually (and currently) a problem for CAN, but
>> given that we already have a generic netlink interface for creating
>> network interfaces that can easily support this, what are the reasons
>> for adding a new interface instead of using the existing one?
> 
> You refer to the API described at http://lwn.net/Articles/236919/, I
> assume.

Exactly.

> Well, I know that netlink is used to define routes in the kernel
> or VLANs but I was not aware that it can also be used to configure real
> network devices. What a pity. At a first glance, I could also be used
> for CAN, of course. There are the following requirements:
> 
> 1. Set and get CAN device properties like bit-rate and controller mode.
> 2. Show CAN bus state (active, error-passive or bus-off).
> 3. Get device constants like clock frequency and bit-timing parameters.
> 4. Dump CAN device statistics.
> 5. Trigger device restart if CAN bus-off state has been detected.
> 
> Not sure yet, if the interface if good for all purposes. Especially
> point 5. might be better handled by an IOCTL.

The first points sound pretty regular. The last one - just triggering
it is no problem of course, but since I don't know how the detection
works, I can't really tell whether its suitable.

> And we need a user space
> tool, e.g. canconfig, to handle the user requests and communicate with
> the kernel side.

Thats pretty standard :)

> We will follow that promising route. Any further help
> or link is appreciated. Thanks.

It should be quite easy to move your interface on top. A few examples
that might be useful are vlan, ip_gre and macvlan.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ