| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20090224032304.GA26344@hexapodia.org> Date: Mon, 23 Feb 2009 19:23:04 -0800 From: Andy Isaacson <adi@...apodia.org> To: Yinghai Lu <yinghai@...nel.org> Cc: Maciej Rutecki <maciej.rutecki@...il.com>, "Rafael J. Wysocki" <rjw@...k.pl>, Eric Anholt <eric@...olt.net>, Linus Torvalds <torvalds@...ux-foundation.org>, Linux Kernel Mailing List <linux-kernel@...r.kernel.org>, Jesse Barnes <jbarnes@...tuousgeek.org>, "lenb@...nel.org" <lenb@...nel.org>, Ingo Molnar <mingo@...e.hu>, mjg@...hat.com, Andrew Morton <akpm@...ux-foundation.org>, rui.zhang@...el.com, airlied@...hat.com Subject: Re: [Linux 2.6.29-rc6] [drm:i915_set_status_page] *ERROR* can not ioremap virtual address for G33 hw status page On Mon, Feb 23, 2009 at 05:01:10PM -0800, Yinghai Lu wrote: > CONFIG_MTRR=y > CONFIG_MTRR_SANITIZER=y > CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 > CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 > > should help mtrr ones. > > please post bootlog with those option set. Doesn't help here (Dell E6400). [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.29-rc6-dirty (adi@...-loaner-01) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #14 SMP Mon Feb 23 19:05:31 PST 2009 [ 0.000000] Command line: root=/dev/sda1 ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d04d400 (usable) [ 0.000000] BIOS-e820: 000000007d04d400 - 000000007d04f400 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007d04f400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x7d04d max_arch_pfn = 0x100000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 32GB, type WB [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 2012MB, range: 4MB, type UC [ 0.000000] reg 3, base: 2016MB, range: 32MB, type UC [ 0.000000] total RAM coverred: 32220M [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 64K chunk_size: 2G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 128K chunk_size: 256M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 128K chunk_size: 512M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 128K chunk_size: 2G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 256K chunk_size: 512M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 256K chunk_size: 2G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 512K chunk_size: 256M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 512K chunk_size: 512M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 512K chunk_size: 2G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 1M chunk_size: 256M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 1M chunk_size: 512M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 1M chunk_size: 2G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 2M chunk_size: 256M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 2M chunk_size: 512M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 2M chunk_size: 2G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 7 lose cover RAM: 30208M [ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 4M chunk_size: 256M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 4M chunk_size: 512M num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 4M chunk_size: 2G num_reg: 7 lose cover RAM: 16G [ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 7 lose cover RAM: 30212M [ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 7 lose cover RAM: 16388M [ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 7 lose cover RAM: 16388M [ 0.000000] gran_size: 8M chunk_size: 256M num_reg: 7 lose cover RAM: 16388M [ 0.000000] gran_size: 8M chunk_size: 512M num_reg: 7 lose cover RAM: 16388M [ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 7 lose cover RAM: 16388M [ 0.000000] gran_size: 8M chunk_size: 2G num_reg: 7 lose cover RAM: 16388M [ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 7 lose cover RAM: 29196M [ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 7 lose cover RAM: 30220M [ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 7 lose cover RAM: 16396M [ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 7 lose cover RAM: 16396M [ 0.000000] gran_size: 16M chunk_size: 256M num_reg: 7 lose cover RAM: 16396M [ 0.000000] gran_size: 16M chunk_size: 512M num_reg: 7 lose cover RAM: 16396M [ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 7 lose cover RAM: 16396M [ 0.000000] gran_size: 16M chunk_size: 2G num_reg: 7 lose cover RAM: 16396M [ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 7 lose cover RAM: 28700M [ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 7 lose cover RAM: 28700M [ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 7 lose cover RAM: 28M [ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 7 lose cover RAM: 28M [ 0.000000] gran_size: 32M chunk_size: 512M num_reg: 7 lose cover RAM: 28M [ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 7 lose cover RAM: 28M [ 0.000000] gran_size: 32M chunk_size: 2G num_reg: 7 lose cover RAM: 28M [ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 7 lose cover RAM: 28700M [ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 7 lose cover RAM: 28M [ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 7 lose cover RAM: 28M [ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 7 lose cover RAM: 28M [ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 7 lose cover RAM: 28M [ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 7 lose cover RAM: 28M [ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 7 lose cover RAM: 24668M [ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 7 lose cover RAM: 92M [ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 7 lose cover RAM: 92M [ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 7 lose cover RAM: 92M [ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 7 lose cover RAM: 92M [ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 7 lose cover RAM: 16604M [ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 7 lose cover RAM: 220M [ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 7 lose cover RAM: 220M [ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 7 lose cover RAM: 220M [ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 7 lose cover RAM: 476M [ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 7 lose cover RAM: 476M [ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 7 lose cover RAM: 476M [ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 5 lose cover RAM: 1500M [ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 5 lose cover RAM: 1500M [ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 3 lose cover RAM: 3548M [ 0.000000] mtrr_cleanup: can not find optimal value [ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size [ 0.000000] init_memory_mapping: 0000000000000000-000000007d04d000 [ 0.000000] 0000000000 - 007d000000 page 2M [ 0.000000] 007d000000 - 007d04d000 page 4k [ 0.000000] kernel direct mapping tables up to 7d04d000 @ 8000-c000 [ 0.000000] last_map_addr: 7d04d000 end: 7d04d000 [ 0.000000] RAMDISK: 37c4b000 - 37fefdc3 [ 0.000000] ACPI: RSDP 000FB9C0, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 7D051E00, 006C (r1 DELL M09 27D80C11 ASL 61) [ 0.000000] ACPI: FACP 7D051C9C, 00F4 (r4 DELL M09 27D80C11 ASL 61) [ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 128/64 [20081204] [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT 7D052400, 6A2B (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 7D060C00, 0040 [ 0.000000] ACPI: HPET 7D051F00, 0038 (r1 DELL M09 1 ASL 61) [ 0.000000] ACPI: ____ 7D060400, 0030 (r1 DELL M09 27D80C11 ASL 61) [ 0.000000] ACPI: APIC 7D052000, 0068 (r1 DELL M09 27D80C11 ASL 47) [ 0.000000] ACPI: ASF! 7D051C00, 006A (r32 DELL M09 27D80C11 ASL 61) [ 0.000000] ACPI: MCFG 7D051FC0, 003E (r16 DELL M09 27D80C11 ASL 61) [ 0.000000] ACPI: TCPA 7D052300, 0032 (r1 0 ASL 0) [ 0.000000] ACPI: SLIC 7D05209C, 0176 (r1 DELL M09 27D80C11 ASL 61) [ 0.000000] ACPI: SSDT 7D05032D, 066C (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007d04d000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007d04d000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [000000000000a000 - 0000000000019a0f] pages 10 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 007d04d000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000bcdcd8] TEXT DATA BSS ==> [0000200000 - 0000bcdcd8] [ 0.000000] #3 [0037c4b000 - 0037fefdc3] RAMDISK ==> [0037c4b000 - 0037fefdc3] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007d04d [ 0.000000] On node 0 totalpages: 511980 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2611 pages reserved [ 0.000000] DMA zone: 1332 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6946 pages used for memmap [ 0.000000] DMA32 zone: 501035 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:78000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 502367 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda1 ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2526.874 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] Memory: 2005104k/2048308k available (4737k kernel code, 388k absent, 42816k reserved, 3114k data, 640k init) [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.74 BogoMIPS (lpj=10107496) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Initializing. [ 0.004000] SELinux: Starting in permissive mode [ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004172] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004925] Mount-cache hash table entries: 256 [ 0.005187] Initializing cgroup subsys ns [ 0.005301] Initializing cgroup subsys cpuacct [ 0.005432] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.005584] CPU: L2 cache: 6144K [ 0.005694] [ds] using Core 2/Atom configuration [ 0.005807] CPU 0/0x0 -> Node 0 [ 0.005918] CPU: Physical Processor ID: 0 [ 0.006029] CPU: Processor Core ID: 0 [ 0.006140] using mwait in idle threads. [ 0.008748] ACPI: Core revision 20081204 [ 0.020056] Setting APIC routing to flat [ 0.020718] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.061925] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 [ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5053.98 BogoMIPS (lpj=10107964) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] [ds] using Core 2/Atom configuration [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.149663] CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 [ 0.150905] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.152092] Brought up 2 CPUs [ 0.152200] Total of 2 processors activated (10107.73 BogoMIPS). [ 0.152393] khelper used greatest stack depth: 5976 bytes left [ 0.152393] net_namespace: 1784 bytes [ 0.152393] Booting paravirtualized kernel on bare hardware [ 0.156131] Time: 3:08:11 Date: 02/24/09 [ 0.156263] NET: Registered protocol family 16 [ 0.156389] ACPI: bus type pci registered [ 0.156389] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.156389] PCI: MCFG area at f8000000 reserved in E820 [ 0.159051] PCI: Using MMCONFIG at f8000000 - fbffffff [ 0.160002] PCI: Using configuration type 1 for base access [ 0.164030] bio: create slab <bio-0> at 0 [ 0.164741] ACPI: EC: Look up EC in DSDT [ 0.164938] ACPI: BIOS _OSI(Linux) query ignored [ 0.224019] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.225403] ACPI: Interpreter enabled [ 0.225403] ACPI: (supports S0 S3 S4 S5) [ 0.225403] ACPI: Using IOAPIC for interrupt routing [ 0.336125] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930 [ 0.336175] ACPI: EC: driver started in interrupt mode [ 0.337414] ACPI: No dock devices found. [ 0.337531] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.340033] DMAR: Forcing write-buffer flush capability [ 0.340170] pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff] [ 0.340175] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] [ 0.340179] pci 0000:00:02.0: reg 20 io port: [0xef98-0xef9f] [ 0.340211] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff] [ 0.340315] pci 0000:00:19.0: reg 10 32bit mmio: [0xf6ae0000-0xf6afffff] [ 0.340322] pci 0000:00:19.0: reg 14 32bit mmio: [0xf6adb000-0xf6adbfff] [ 0.340329] pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff] [ 0.340383] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.340497] pci 0000:00:19.0: PME# disabled [ 0.340666] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f] [ 0.340753] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f] [ 0.340841] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf] [ 0.340930] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] [ 0.340995] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.341109] pci 0000:00:1a.7: PME# disabled [ 0.341109] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6adc000-0xf6adffff] [ 0.341109] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.341109] pci 0000:00:1b.0: PME# disabled [ 0.341109] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.341109] pci 0000:00:1c.0: PME# disabled [ 0.341109] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.341109] pci 0000:00:1c.1: PME# disabled [ 0.341109] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.341109] pci 0000:00:1c.2: PME# disabled [ 0.341289] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.341402] pci 0000:00:1c.3: PME# disabled [ 0.341579] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f] [ 0.341666] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f] [ 0.341754] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] [ 0.341843] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] [ 0.341907] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.342020] pci 0000:00:1d.7: PME# disabled [ 0.342368] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77] [ 0.342375] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b] [ 0.342382] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87] [ 0.342389] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b] [ 0.342396] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf] [ 0.342403] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff] [ 0.342448] pci 0000:00:1f.2: PME# supported from D3hot [ 0.342559] pci 0000:00:1f.2: PME# disabled [ 0.342703] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6adaf00-0xf6adafff] [ 0.342720] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f] [ 0.342892] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fe000-0xf69fffff] [ 0.343006] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold [ 0.343121] pci 0000:0c:00.0: PME# disabled [ 0.343303] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff] [ 0.343422] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] [ 0.343426] pci 0000:00:1c.3: bridge 32bit mmio: [0xf6600000-0xf68fffff] [ 0.343433] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] [ 0.343476] pci 0000:03:01.0: reg 10 32bit mmio: [0xf65ff800-0xf65fffff] [ 0.343532] pci 0000:03:01.0: supports D1 D2 [ 0.343533] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.343647] pci 0000:03:01.0: PME# disabled [ 0.343792] pci 0000:03:01.1: reg 10 32bit mmio: [0xf65ff600-0xf65ff6ff] [ 0.343849] pci 0000:03:01.1: supports D1 D2 [ 0.343851] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.343965] pci 0000:03:01.1: PME# disabled [ 0.344041] pci 0000:03:01.2: reg 10 32bit mmio: [0xf65ff700-0xf65ff7ff] [ 0.344098] pci 0000:03:01.2: supports D1 D2 [ 0.344100] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.344213] pci 0000:03:01.2: PME# disabled [ 0.344385] pci 0000:00:1e.0: transparent bridge [ 0.344498] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6500000-0xf65fffff] [ 0.344538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.344837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.344949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.345019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.345088] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.345156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.360662] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) [ 0.360662] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3 [ 0.360662] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) [ 0.360957] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) [ 0.361433] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.362153] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.362873] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.363580] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.368027] SCSI subsystem initialized [ 0.368114] libata version 3.00 loaded. [ 0.368114] usbcore: registered new interface driver usbfs [ 0.368136] usbcore: registered new interface driver hub [ 0.368136] usbcore: registered new device driver usb [ 0.368136] PCI: Using ACPI for IRQ routing [ 0.380006] Bluetooth: Core ver 2.14 [ 0.380115] NET: Registered protocol family 31 [ 0.380115] Bluetooth: HCI device and connection manager initialized [ 0.380225] Bluetooth: HCI socket layer initialized [ 0.396033] cfg80211: Using static regulatory domain info [ 0.396114] cfg80211: Regulatory domain: US [ 0.396221] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.396393] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.396505] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.396616] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.396727] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.396837] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.396949] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.397060] cfg80211: Calling CRDA for country: US [ 0.400007] NetLabel: Initializing [ 0.400111] NetLabel: domain hash size = 128 [ 0.400219] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.400336] NetLabel: unlabeled traffic allowed by default [ 0.400458] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.400458] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.423148] pnp: PnP ACPI init [ 0.423259] ACPI: bus type pnp registered [ 0.503151] Switched to high resolution mode on CPU 1 [ 0.504006] Switched to high resolution mode on CPU 0 [ 0.507089] pnp: PnP ACPI: found 14 devices [ 0.507197] ACPI: ACPI bus type pnp unregistered [ 0.507312] system 00:05: ioport range 0xc80-0xcaf has been reserved [ 0.507423] system 00:05: ioport range 0xcc0-0xcff could not be reserved [ 0.507537] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.507652] system 00:0a: ioport range 0xcb0-0xcbb has been reserved [ 0.507763] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.507877] system 00:0b: ioport range 0x900-0x92f has been reserved [ 0.507988] system 00:0b: ioport range 0x931-0x933 has been reserved [ 0.508098] system 00:0b: ioport range 0x935-0x97f has been reserved [ 0.508209] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 0.508320] system 00:0b: ioport range 0x1000-0x1005 has been reserved [ 0.508431] system 00:0b: ioport range 0x1008-0x100f has been reserved [ 0.508546] system 00:0c: ioport range 0xf400-0xf4fe has been reserved [ 0.508657] system 00:0c: ioport range 0x1006-0x1007 has been reserved [ 0.508767] system 00:0c: ioport range 0x100a-0x1059 could not be reserved [ 0.508879] system 00:0c: ioport range 0x1060-0x107f has been reserved [ 0.508990] system 00:0c: ioport range 0x1080-0x10bf has been reserved [ 0.509106] system 00:0c: ioport range 0x1100-0x111f has been reserved [ 0.509217] system 00:0c: ioport range 0x1010-0x102f has been reserved [ 0.509328] system 00:0c: ioport range 0x809-0x809 has been reserved [ 0.509442] system 00:0d: iomem range 0x0-0x9efff could not be reserved [ 0.509553] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved [ 0.509665] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.509775] system 00:0d: iomem range 0xe0000-0xfffff has been reserved [ 0.509888] system 00:0d: iomem range 0x100000-0x7d04d3ff could not be reserved [ 0.510060] system 00:0d: iomem range 0x7d04d400-0x7dafffff could not be reserved [ 0.510232] system 00:0d: iomem range 0x7db00000-0x7dbfffff has been reserved [ 0.510343] system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved [ 0.510515] system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved [ 0.510626] system 00:0d: iomem range 0xfec00000-0xfec0ffff has been reserved [ 0.510738] system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.510850] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.510961] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.511074] system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved [ 0.511186] system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved [ 0.511297] system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved [ 0.511410] system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved [ 0.511522] system 00:0d: iomem range 0xfed1c800-0xfed1cfff has been reserved [ 0.511634] system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved [ 0.511746] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.516792] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b [ 0.516902] pci 0000:00:1c.0: IO window: disabled [ 0.517019] pci 0000:00:1c.0: MEM window: disabled [ 0.517129] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.517244] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c [ 0.517354] pci 0000:00:1c.1: IO window: disabled [ 0.517466] pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff [ 0.517578] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.517693] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d [ 0.517802] pci 0000:00:1c.2: IO window: disabled [ 0.517914] pci 0000:00:1c.2: MEM window: disabled [ 0.518024] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.518138] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0e [ 0.518250] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 0.518363] pci 0000:00:1c.3: MEM window: 0xf6600000-0xf68fffff [ 0.518476] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff [ 0.520435] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.520544] pci 0000:00:1e.0: IO window: disabled [ 0.520655] pci 0000:00:1e.0: MEM window: 0xf6500000-0xf65fffff [ 0.520767] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.520890] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.521009] pci 0000:00:1c.0: setting latency timer to 64 [ 0.521018] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.521131] pci 0000:00:1c.1: setting latency timer to 64 [ 0.521139] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.521252] pci 0000:00:1c.2: setting latency timer to 64 [ 0.521260] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.521373] pci 0000:00:1c.3: setting latency timer to 64 [ 0.521381] pci 0000:00:1e.0: setting latency timer to 64 [ 0.521384] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.521386] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.521388] pci_bus 0000:0b: resource 0 mem: [0x0-0x0] [ 0.521390] pci_bus 0000:0b: resource 1 mem: [0x0-0x0] [ 0.521391] pci_bus 0000:0b: resource 2 mem: [0x0-0x0] [ 0.521393] pci_bus 0000:0b: resource 3 mem: [0x0-0x0] [ 0.521394] pci_bus 0000:0c: resource 0 mem: [0x0-0x0] [ 0.521396] pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff] [ 0.521397] pci_bus 0000:0c: resource 2 mem: [0x0-0x0] [ 0.521399] pci_bus 0000:0c: resource 3 mem: [0x0-0x0] [ 0.521400] pci_bus 0000:0d: resource 0 mem: [0x0-0x0] [ 0.521402] pci_bus 0000:0d: resource 1 mem: [0x0-0x0] [ 0.521403] pci_bus 0000:0d: resource 2 mem: [0x0-0x0] [ 0.521405] pci_bus 0000:0d: resource 3 mem: [0x0-0x0] [ 0.521407] pci_bus 0000:0e: resource 0 io: [0xd000-0xdfff] [ 0.521408] pci_bus 0000:0e: resource 1 mem: [0xf6600000-0xf68fffff] [ 0.521410] pci_bus 0000:0e: resource 2 mem: [0xf0000000-0xf01fffff] [ 0.521412] pci_bus 0000:0e: resource 3 mem: [0x0-0x0] [ 0.521413] pci_bus 0000:03: resource 0 mem: [0x0-0x0] [ 0.521415] pci_bus 0000:03: resource 1 mem: [0xf6500000-0xf65fffff] [ 0.521417] pci_bus 0000:03: resource 2 mem: [0x0-0x0] [ 0.521418] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.521420] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.521441] NET: Registered protocol family 2 [ 0.569083] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.569770] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.571425] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.571996] TCP: Hash tables configured (established 262144 bind 65536) [ 0.572108] TCP reno registered [ 0.581082] NET: Registered protocol family 1 [ 0.581291] checking if image is initramfs... it is [ 0.841421] Freeing initrd memory: 3731k freed [ 0.842901] Microcode Update Driver: v2.00 <tigran@...azian.fsnet.co.uk>, Peter Oruba [ 0.843293] audit: initializing netlink socket (disabled) [ 0.843411] type=2000 audit(1235444891.841:1): initialized [ 0.850847] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.853177] VFS: Disk quotas dquot_6.5.2 [ 0.853356] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.854252] msgmni has been set to 3923 [ 0.854454] SELinux: Registering netfilter hooks [ 0.854774] alg: No test for stdrng (krng) [ 0.854977] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.855148] io scheduler noop registered [ 0.855255] io scheduler anticipatory registered [ 0.855361] io scheduler deadline registered [ 0.855568] io scheduler cfq registered (default) [ 0.855686] pci 0000:00:02.0: Boot video device [ 0.855696] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080 [ 0.855697] pci 0000:00:1a.0: Performing full reset [ 0.855716] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080 [ 0.855717] pci 0000:00:1a.1: Performing full reset [ 0.855736] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0080 [ 0.855737] pci 0000:00:1a.2: Performing full reset [ 0.855786] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080 [ 0.855787] pci 0000:00:1d.0: Performing full reset [ 0.855804] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080 [ 0.855806] pci 0000:00:1d.1: Performing full reset [ 0.855824] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080 [ 0.855826] pci 0000:00:1d.2: Performing full reset [ 0.855961] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.856067] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.856251] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.856323] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.856490] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.856561] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.856733] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.856804] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.857108] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.857798] ACPI: SSDT 7D050999, 0281 (r1 PmRef BspIst 3000 INTL 20050624) [ 0.858433] ACPI: SSDT 7D050DF1, 05C6 (r1 PmRef BspCst 3001 INTL 20050624) [ 0.858997] Monitor-Mwait will be used to enter C-1 state [ 0.859002] Monitor-Mwait will be used to enter C-2 state [ 0.859006] Monitor-Mwait will be used to enter C-3 state [ 0.859049] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.859361] processor ACPI_CPU:00: registered as cooling_device0 [ 0.859471] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.860111] ACPI: SSDT 7D050C1A, 01D7 (r1 PmRef ApIst 3000 INTL 20050624) [ 0.860676] ACPI: SSDT 7D0513B7, 008D (r1 PmRef ApCst 3000 INTL 20050624) [ 0.861335] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.861640] processor ACPI_CPU:01: registered as cooling_device1 [ 0.861750] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.884934] XENFS: not registering filesystem on non-xen platform [ 0.887429] Non-volatile memory driver v1.3 [ 0.887536] Linux agpgart interface v0.103 [ 0.887657] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 0.889703] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 0.893465] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.893669] [drm] Initialized drm 1.1.0 20060810 [ 0.893835] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.893947] pci 0000:00:02.0: setting latency timer to 64 [ 0.906728] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 0.906904] [drm] MTRR allocation failed [ 0.906904] . Graphics performance may suffer. [ 0.907130] pci 0000:00:02.0: irq 28 for MSI/MSI-X [ 0.907143] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 0.907267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.160282] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.160768] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.162287] brd: module loaded [ 1.162457] console [netcon0] enabled [ 1.162564] netconsole: network logging started [ 1.162726] Loading iSCSI transport class v2.0-870. [ 1.163017] Driver 'sd' needs updating - please use bus_type methods [ 1.163154] Driver 'sr' needs updating - please use bus_type methods [ 1.163345] ahci 0000:00:1f.2: version 3.0 [ 1.163358] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.163499] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 1.163556] ahci: SSS flag set, parallel bus scan disabled [ 1.163698] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.163871] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems [ 1.164053] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.164362] scsi0 : ahci [ 1.164601] scsi1 : ahci [ 1.164800] scsi2 : ahci [ 1.164994] scsi3 : ahci [ 1.165197] scsi4 : ahci [ 1.165401] scsi5 : ahci [ 1.166028] ata1: SATA max UDMA/133 abar m2048@...ed1c800 port 0xfed1c900 irq 29 [ 1.166202] ata2: SATA max UDMA/133 abar m2048@...ed1c800 port 0xfed1c980 irq 29 [ 1.166375] ata3: DUMMY [ 1.166479] ata4: DUMMY [ 1.166584] ata5: SATA max UDMA/133 abar m2048@...ed1c800 port 0xfed1cb00 irq 29 [ 1.166758] ata6: SATA max UDMA/133 abar m2048@...ed1c800 port 0xfed1cb80 irq 29 [ 1.648012] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.650383] ata1.00: ATA-8: ST9160414ASG, DEC5, max UDMA/133 [ 1.650493] ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.653424] ata1.00: configured for UDMA/133 [ 1.668092] scsi 0:0:0:0: Direct-Access ATA ST9160414ASG DEC5 PQ: 0 ANSI: 5 [ 1.668410] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 1.668594] sd 0:0:0:0: [sda] Write Protect is off [ 1.668702] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.668722] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.668940] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 1.669122] sd 0:0:0:0: [sda] Write Protect is off [ 1.669230] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.669250] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.669426] sda: sda1 sda2 < sda5 > [ 1.723025] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.723213] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.204012] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.208159] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-U20N, A101, max UDMA/133 [ 2.212968] ata2.00: configured for UDMA/133 [ 2.230944] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-U20N A101 PQ: 0 ANSI: 5 [ 2.242192] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.242366] Uniform CD-ROM driver Revision: 3.20 [ 2.242598] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.242671] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.560014] ata5: SATA link down (SStatus 0 SControl 300) [ 2.896013] ata6: SATA link down (SStatus 0 SControl 300) [ 2.912145] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.912257] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 [ 2.912279] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.912399] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.912402] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.912559] drivers/usb/core/inode.c: creating file 'devices' [ 2.912563] drivers/usb/core/inode.c: creating file '001' [ 2.912606] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.912785] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 2.912789] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 2.912803] ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT [ 2.916680] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.916792] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 2.916794] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 2.916805] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 2.916916] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.920791] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 2.932009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.932148] usb usb1: default language 0x0409 [ 2.932154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.932265] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.932436] usb usb1: Product: EHCI Host Controller [ 2.932544] usb usb1: Manufacturer: Linux 2.6.29-rc6-dirty ehci_hcd [ 2.932655] usb usb1: SerialNumber: 0000:00:1a.7 [ 2.932789] usb usb1: uevent [ 2.932821] usb usb1: usb_probe_device [ 2.932823] usb usb1: configuration #1 chosen from 1 choice [ 2.932936] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 2.932950] usb 1-0:1.0: uevent [ 2.932981] hub 1-0:1.0: usb_probe_interface [ 2.932983] hub 1-0:1.0: usb_probe_interface - got id [ 2.932985] hub 1-0:1.0: USB hub found [ 2.933097] hub 1-0:1.0: 6 ports detected [ 2.933203] hub 1-0:1.0: standalone hub [ 2.933204] hub 1-0:1.0: no power switching (usb 1.0) [ 2.933205] hub 1-0:1.0: individual port over-current protection [ 2.933207] hub 1-0:1.0: power on to power good time: 20ms [ 2.933211] hub 1-0:1.0: local power source is good [ 2.933213] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 2.933306] drivers/usb/core/inode.c: creating file '001' [ 2.933374] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.933494] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.933497] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.933644] drivers/usb/core/inode.c: creating file '002' [ 2.933693] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.933870] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 2.933874] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 2.933886] ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT [ 2.937768] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.937879] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.937881] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 2.937891] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 2.938002] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.941878] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 2.952006] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.952128] usb usb2: default language 0x0409 [ 2.952134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.952245] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.952417] usb usb2: Product: EHCI Host Controller [ 2.952525] usb usb2: Manufacturer: Linux 2.6.29-rc6-dirty ehci_hcd [ 2.952635] usb usb2: SerialNumber: 0000:00:1d.7 [ 2.952770] usb usb2: uevent [ 2.952800] usb usb2: usb_probe_device [ 2.952802] usb usb2: configuration #1 chosen from 1 choice [ 2.952914] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 2.952926] usb 2-0:1.0: uevent [ 2.952955] hub 2-0:1.0: usb_probe_interface [ 2.952957] hub 2-0:1.0: usb_probe_interface - got id [ 2.952958] hub 2-0:1.0: USB hub found [ 2.953069] hub 2-0:1.0: 6 ports detected [ 2.953175] hub 2-0:1.0: standalone hub [ 2.953177] hub 2-0:1.0: no power switching (usb 1.0) [ 2.953178] hub 2-0:1.0: individual port over-current protection [ 2.953180] hub 2-0:1.0: power on to power good time: 20ms [ 2.953183] hub 2-0:1.0: local power source is good [ 2.953184] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 2.953246] drivers/usb/core/inode.c: creating file '001' [ 2.953326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.953436] ohci_hcd: block sizes: ed 80 td 96 [ 2.953468] uhci_hcd: USB Universal Host Controller Interface driver [ 2.953642] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.953759] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.953762] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.953907] drivers/usb/core/inode.c: creating file '003' [ 2.953950] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.954128] uhci_hcd 0000:00:1a.0: detected 2 ports [ 2.954240] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.954242] uhci_hcd 0000:00:1a.0: Performing full reset [ 2.954256] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 2.954260] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60 [ 2.954393] usb usb3: default language 0x0409 [ 2.954399] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.954509] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.954680] usb usb3: Product: UHCI Host Controller [ 2.954788] usb usb3: Manufacturer: Linux 2.6.29-rc6-dirty uhci_hcd [ 2.954897] usb usb3: SerialNumber: 0000:00:1a.0 [ 2.955031] usb usb3: uevent [ 2.955062] usb usb3: usb_probe_device [ 2.955063] usb usb3: configuration #1 chosen from 1 choice [ 2.955175] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 2.955192] usb 3-0:1.0: uevent [ 2.955222] hub 3-0:1.0: usb_probe_interface [ 2.955224] hub 3-0:1.0: usb_probe_interface - got id [ 2.955225] hub 3-0:1.0: USB hub found [ 2.955336] hub 3-0:1.0: 2 ports detected [ 2.955442] hub 3-0:1.0: standalone hub [ 2.955443] hub 3-0:1.0: no power switching (usb 1.0) [ 2.955445] hub 3-0:1.0: individual port over-current protection [ 2.955446] hub 3-0:1.0: power on to power good time: 2ms [ 2.955450] hub 3-0:1.0: local power source is good [ 2.955451] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 2.955499] drivers/usb/core/inode.c: creating file '001' [ 2.955567] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.955682] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.955685] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.955831] drivers/usb/core/inode.c: creating file '004' [ 2.955880] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.956070] uhci_hcd 0000:00:1a.1: detected 2 ports [ 2.956181] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.956182] uhci_hcd 0000:00:1a.1: Performing full reset [ 2.956197] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 2.956207] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80 [ 2.956340] usb usb4: default language 0x0409 [ 2.956345] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.958235] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.958406] usb usb4: Product: UHCI Host Controller [ 2.958514] usb usb4: Manufacturer: Linux 2.6.29-rc6-dirty uhci_hcd [ 2.958623] usb usb4: SerialNumber: 0000:00:1a.1 [ 2.958757] usb usb4: uevent [ 2.958789] usb usb4: usb_probe_device [ 2.958790] usb usb4: configuration #1 chosen from 1 choice [ 2.958902] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 2.958914] usb 4-0:1.0: uevent [ 2.958942] hub 4-0:1.0: usb_probe_interface [ 2.958944] hub 4-0:1.0: usb_probe_interface - got id [ 2.958945] hub 4-0:1.0: USB hub found [ 2.959054] hub 4-0:1.0: 2 ports detected [ 2.959161] hub 4-0:1.0: standalone hub [ 2.959162] hub 4-0:1.0: no power switching (usb 1.0) [ 2.959163] hub 4-0:1.0: individual port over-current protection [ 2.959165] hub 4-0:1.0: power on to power good time: 2ms [ 2.959168] hub 4-0:1.0: local power source is good [ 2.959169] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 2.959217] drivers/usb/core/inode.c: creating file '001' [ 2.959283] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.959397] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 2.959400] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.959542] drivers/usb/core/inode.c: creating file '005' [ 2.959586] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 2.959762] uhci_hcd 0000:00:1a.2: detected 2 ports [ 2.959872] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.959873] uhci_hcd 0000:00:1a.2: Performing full reset [ 2.959887] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 2.959891] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0 [ 2.960031] usb usb5: default language 0x0409 [ 2.960036] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.960147] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.960317] usb usb5: Product: UHCI Host Controller [ 2.960424] usb usb5: Manufacturer: Linux 2.6.29-rc6-dirty uhci_hcd [ 2.960534] usb usb5: SerialNumber: 0000:00:1a.2 [ 2.960666] usb usb5: uevent [ 2.960696] usb usb5: usb_probe_device [ 2.960698] usb usb5: configuration #1 chosen from 1 choice [ 2.960809] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 2.960822] usb 5-0:1.0: uevent [ 2.960852] hub 5-0:1.0: usb_probe_interface [ 2.960854] hub 5-0:1.0: usb_probe_interface - got id [ 2.960855] hub 5-0:1.0: USB hub found [ 2.960964] hub 5-0:1.0: 2 ports detected [ 2.961071] hub 5-0:1.0: standalone hub [ 2.961072] hub 5-0:1.0: no power switching (usb 1.0) [ 2.961073] hub 5-0:1.0: individual port over-current protection [ 2.961075] hub 5-0:1.0: power on to power good time: 2ms [ 2.961078] hub 5-0:1.0: local power source is good [ 2.961080] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 2.961128] drivers/usb/core/inode.c: creating file '001' [ 2.961197] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.961311] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.961314] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.961459] drivers/usb/core/inode.c: creating file '006' [ 2.961509] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 2.961686] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.961797] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.961799] uhci_hcd 0000:00:1d.0: Performing full reset [ 2.961813] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 2.961816] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00 [ 2.961953] usb usb6: default language 0x0409 [ 2.961959] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.962070] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.962240] usb usb6: Product: UHCI Host Controller [ 2.962348] usb usb6: Manufacturer: Linux 2.6.29-rc6-dirty uhci_hcd [ 2.962458] usb usb6: SerialNumber: 0000:00:1d.0 [ 2.962594] usb usb6: uevent [ 2.962629] usb usb6: usb_probe_device [ 2.962631] usb usb6: configuration #1 chosen from 1 choice [ 2.962742] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 2.962753] usb 6-0:1.0: uevent [ 2.962786] hub 6-0:1.0: usb_probe_interface [ 2.962787] hub 6-0:1.0: usb_probe_interface - got id [ 2.962789] hub 6-0:1.0: USB hub found [ 2.962899] hub 6-0:1.0: 2 ports detected [ 2.963006] hub 6-0:1.0: standalone hub [ 2.963007] hub 6-0:1.0: no power switching (usb 1.0) [ 2.963009] hub 6-0:1.0: individual port over-current protection [ 2.963010] hub 6-0:1.0: power on to power good time: 2ms [ 2.963013] hub 6-0:1.0: local power source is good [ 2.963015] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 2.963063] drivers/usb/core/inode.c: creating file '001' [ 2.963132] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.963248] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.963251] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.963398] drivers/usb/core/inode.c: creating file '007' [ 2.963444] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 2.963619] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.963730] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.963732] uhci_hcd 0000:00:1d.1: Performing full reset [ 2.963746] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 2.963750] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20 [ 2.963888] usb usb7: default language 0x0409 [ 2.963893] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.964009] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.964180] usb usb7: Product: UHCI Host Controller [ 2.964287] usb usb7: Manufacturer: Linux 2.6.29-rc6-dirty uhci_hcd [ 2.964396] usb usb7: SerialNumber: 0000:00:1d.1 [ 2.964532] usb usb7: uevent [ 2.964565] usb usb7: usb_probe_device [ 2.964566] usb usb7: configuration #1 chosen from 1 choice [ 2.964678] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 2.964689] usb 7-0:1.0: uevent [ 2.964722] hub 7-0:1.0: usb_probe_interface [ 2.964723] hub 7-0:1.0: usb_probe_interface - got id [ 2.964725] hub 7-0:1.0: USB hub found [ 2.964835] hub 7-0:1.0: 2 ports detected [ 2.964941] hub 7-0:1.0: standalone hub [ 2.964943] hub 7-0:1.0: no power switching (usb 1.0) [ 2.964944] hub 7-0:1.0: individual port over-current protection [ 2.964946] hub 7-0:1.0: power on to power good time: 2ms [ 2.964949] hub 7-0:1.0: local power source is good [ 2.964950] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 2.965001] drivers/usb/core/inode.c: creating file '001' [ 2.965070] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.965185] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.965188] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.965338] drivers/usb/core/inode.c: creating file '008' [ 2.965382] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 2.965559] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.965669] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.965671] uhci_hcd 0000:00:1d.2: Performing full reset [ 2.965685] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 2.965689] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 2.965827] usb usb8: default language 0x0409 [ 2.965832] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.965943] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.966115] usb usb8: Product: UHCI Host Controller [ 2.966221] usb usb8: Manufacturer: Linux 2.6.29-rc6-dirty uhci_hcd [ 2.966330] usb usb8: SerialNumber: 0000:00:1d.2 [ 2.966465] usb usb8: uevent [ 2.966498] usb usb8: usb_probe_device [ 2.966500] usb usb8: configuration #1 chosen from 1 choice [ 2.966609] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 2.966621] usb 8-0:1.0: uevent [ 2.966653] hub 8-0:1.0: usb_probe_interface [ 2.966654] hub 8-0:1.0: usb_probe_interface - got id [ 2.966656] hub 8-0:1.0: USB hub found [ 2.966764] hub 8-0:1.0: 2 ports detected [ 2.966870] hub 8-0:1.0: standalone hub [ 2.966871] hub 8-0:1.0: no power switching (usb 1.0) [ 2.966872] hub 8-0:1.0: individual port over-current protection [ 2.966874] hub 8-0:1.0: power on to power good time: 2ms [ 2.966877] hub 8-0:1.0: local power source is good [ 2.966878] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 2.966931] drivers/usb/core/inode.c: creating file '001' [ 2.967064] usbcore: registered new interface driver usblp [ 2.967174] Initializing USB Mass Storage driver... [ 2.967333] usbcore: registered new interface driver usb-storage [ 2.967442] USB Mass Storage support registered. [ 2.967601] usbcore: registered new interface driver libusual [ 2.967795] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.968262] i8042.c: Warning: Keylock active. [ 2.972189] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.972300] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.972463] mice: PS/2 mouse device common for all mice [ 2.972707] rtc_cmos 00:03: RTC can wake from S4 [ 2.972865] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.973000] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.973161] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.973573] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@...hat.com [ 2.974001] cpuidle: using governor ladder [ 2.974567] cpuidle: using governor menu [ 2.974690] No iBFT detected. [ 2.974815] Marking TSC unstable due to TSC halts in idle [ 2.975020] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.975939] usbcore: registered new interface driver hiddev [ 2.976095] usbcore: registered new interface driver usbhid [ 2.976205] usbhid: v2.6:USB HID core driver [ 2.976358] Advanced Linux Sound Architecture Driver Version 1.0.18a. [ 2.978435] modprobe used greatest stack depth: 5312 bytes left [ 2.978996] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.979019] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 3.032071] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 3.032076] hub 1-0:1.0: port 1: status 0501 change 0001 [ 3.032094] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT [ 3.032098] hub 1-0:1.0: port 5: status 0501 change 0001 [ 3.032107] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT [ 3.032111] hub 1-0:1.0: port 6: status 0501 change 0001 [ 3.052068] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 3.052083] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 3.056061] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.060048] uhci_hcd 0000:00:1a.2: port 1 portsc 008a,00 [ 3.060065] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00 [ 3.060086] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.064071] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.064075] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.088489] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input1 [ 3.100340] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/input/input2 [ 3.116336] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input3 [ 3.132056] hub 1-0:1.0: state 7 ports 6 chg 0062 evt 0000 [ 3.132063] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 3.132363] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/input/input4 [ 3.149280] ALSA device list: [ 3.149386] #0: HDA Intel at 0xf6adc000 irq 21 [ 3.149534] Netfilter messages via NETLINK v0.30. [ 3.149651] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.150003] ctnetlink v0.93: registering with nfnetlink. [ 3.150608] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.150743] TCP cubic registered [ 3.150849] Initializing XFRM netlink socket [ 3.151263] NET: Registered protocol family 10 [ 3.152024] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.152175] IPv6 over IPv4 tunneling driver [ 3.152795] NET: Registered protocol family 17 [ 3.153156] RPC: Registered udp transport module. [ 3.153264] RPC: Registered tcp transport module. [ 3.153380] lib80211: common routines for IEEE802.11 drivers [ 3.153489] lib80211_crypt: registered algorithm 'NULL' [ 3.154514] registered taskstats version 1 [ 3.154735] Magic number: 13:158:109 [ 3.154845] usbmon usbmon5: hash matches [ 3.155044] Freeing unused kernel memory: 640k freed [ 3.155392] Write protecting the kernel read-only data: 7016k [ 3.161844] all_generic_ide used greatest stack depth: 5296 bytes left [ 3.189944] ehci_hcd 0000:00:1a.7: port 1 high speed [ 3.189948] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 3.244050] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 3.267329] thermal LNXTHERM:01: registered as thermal_zone0 [ 3.274349] ACPI: Thermal Zone [THM] (43 C) [ 3.294905] usb usb3: uevent [ 3.294920] usb 3-0:1.0: uevent [ 3.294997] usb usb4: uevent [ 3.295012] usb 4-0:1.0: uevent [ 3.295090] usb usb5: uevent [ 3.295104] usb 5-0:1.0: uevent [ 3.295180] usb usb1: uevent [ 3.295195] usb 1-0:1.0: uevent [ 3.295768] usb usb6: uevent [ 3.295783] usb 6-0:1.0: uevent [ 3.295859] usb usb7: uevent [ 3.295874] usb 7-0:1.0: uevent [ 3.295953] usb usb8: uevent [ 3.295968] usb 8-0:1.0: uevent [ 3.296043] usb usb2: uevent [ 3.296057] usb 2-0:1.0: uevent [ 3.300324] ehci_hcd 0000:00:1a.7: port 1 high speed [ 3.300328] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 3.376456] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 3.376569] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.376733] usb 1-1: uevent [ 3.376745] usb 1-1: usb_probe_device [ 3.376747] usb 1-1: configuration #1 chosen from 1 choice [ 3.376952] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 3.376965] usb 1-1:1.0: uevent [ 3.376975] hub 1-1:1.0: usb_probe_interface [ 3.376976] hub 1-1:1.0: usb_probe_interface - got id [ 3.376978] hub 1-1:1.0: USB hub found [ 3.377203] hub 1-1:1.0: 2 ports detected [ 3.377312] hub 1-1:1.0: compound device; port removable status: FF [ 3.377313] hub 1-1:1.0: individual port power switching [ 3.377315] hub 1-1:1.0: individual port over-current protection [ 3.377316] hub 1-1:1.0: Single TT [ 3.377317] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 3.377319] hub 1-1:1.0: power on to power good time: 100ms [ 3.377577] hub 1-1:1.0: local power source is good [ 3.377579] hub 1-1:1.0: enabling power on all ports [ 3.377863] drivers/usb/core/inode.c: creating file '002' [ 3.377897] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 3.381794] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 3.381920] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 3.382141] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 3.382259] e1000e 0000:00:19.0: setting latency timer to 64 [ 3.382390] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [ 3.433195] ehci_hcd 0000:00:1a.7: port 5 full speed --> companion [ 3.433200] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT [ 3.433203] hub 1-0:1.0: port 5 not reset yet, waiting 50ms [ 3.470758] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:70:d1:b7:92 [ 3.470932] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 3.471067] 0000:00:19.0: eth0: MAC: 6, PHY: 8, PBA No: 1004ff-0ff [ 3.471189] ohci1394 0000:03:01.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.477081] hub 1-1:1.0: port 1: status 0101 change 0001 [ 3.477328] hub 1-1:1.0: port 2: status 0101 change 0001 [ 3.489018] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC [ 3.489040] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 3.500010] Clocksource tsc unstable (delta = -107835430 ns) [ 3.530036] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f65ff800-f65fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.545321] ehci_hcd 0000:00:1a.7: port 6 high speed [ 3.545325] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT [ 3.577021] usb 1-1: link qh256-0001/ffff88007a9f4140 start 255 [1/0 us] [ 3.601047] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 3.657321] ehci_hcd 0000:00:1a.7: port 6 high speed [ 3.657324] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT [ 3.684507] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5 [ 3.725073] PM: Starting manual resume from disk [ 3.725181] PM: Resume from partition 8:5 [ 3.725182] PM: Checking hibernation image. [ 3.725680] PM: Resume from disk failed. [ 3.730659] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6 [ 3.769115] usb 1-6: skipped 2 descriptors after configuration [ 3.769119] usb 1-6: skipped 6 descriptors after interface [ 3.769122] usb 1-6: skipped 1 descriptor after endpoint [ 3.769124] usb 1-6: skipped 8 descriptors after interface [ 3.769736] usb 1-6: default language 0x0409 [ 3.774733] usb 1-6: New USB device found, idVendor=0c45, idProduct=63f8 [ 3.776634] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3.776744] usb 1-6: Product: Laptop_Integrated_Webcam_0.3M [ 3.776852] usb 1-6: Manufacturer: CN0TX593724878C2013V [ 3.776992] usb 1-6: uevent [ 3.777468] usb 1-6: usb_probe_device [ 3.777470] usb 1-6: configuration #1 chosen from 1 choice [ 3.777995] usb 1-6: adding 1-6:1.0 (config #1, interface 0) [ 3.779988] usb 1-6:1.0: uevent [ 3.780052] usb 1-6: adding 1-6:1.1 (config #1, interface 1) [ 3.780076] usb 1-6:1.1: uevent [ 3.780096] drivers/usb/core/inode.c: creating file '004' [ 3.780144] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.780151] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 3.780160] uhci_hcd 0000:00:1a.2: port 1 portsc 0093,00 [ 3.780169] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 3.785317] kjournald starting. Commit interval 5 seconds [ 3.785360] EXT3-fs: mounted filesystem with ordered data mode. [ 3.794907] udevd used greatest stack depth: 4912 bytes left [ 3.909058] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 4.021054] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 4.124053] usb usb4: suspend_rh (auto-stop) [ 4.124081] usb usb6: suspend_rh (auto-stop) [ 4.124107] usb usb7: suspend_rh (auto-stop) [ 4.124133] usb usb8: suspend_rh (auto-stop) [ 4.174074] usb 5-1: skipped 1 descriptor after interface [ 4.174078] usb 5-1: skipped 1 descriptor after interface [ 4.181046] usb 5-1: default language 0x0409 [ 4.200074] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800 [ 4.200189] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.200307] usb 5-1: Product: 5880 [ 4.200410] usb 5-1: Manufacturer: Broadcom Corp [ 4.200515] usb 5-1: SerialNumber: 0123456789ABCD [ 4.200654] usb 5-1: uevent [ 4.200664] usb 5-1: usb_probe_device [ 4.200665] usb 5-1: configuration #0 chosen from 1 choice [ 4.200772] usb 5-1: config 0 descriptor?? [ 4.202077] usb 5-1: adding 5-1:0.0 (config #0, interface 0) [ 4.207080] usb 5-1:0.0: uevent [ 4.207195] usb 5-1: adding 5-1:0.1 (config #0, interface 1) [ 4.210078] usb 5-1:0.1: uevent [ 4.210190] drivers/usb/core/inode.c: creating file '002' [ 4.210231] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0020 [ 4.210240] hub 1-1:1.0: state 7 ports 2 chg 0006 evt 0000 [ 4.210379] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 4.224239] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 4.296246] usb 1-1.1: new high speed USB device using ehci_hcd and address 5 [ 4.323901] runlevel used greatest stack depth: 3608 bytes left [ 4.368054] usb usb3: suspend_rh (auto-stop) [ 4.388484] usb 1-1.1: skipped 2 descriptors after interface [ 4.388488] usb 1-1.1: New USB device found, idVendor=413c, idProduct=8149 [ 4.388605] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.388813] usb 1-1.1: uevent [ 4.388820] usb 1-1.1: usb_probe_device [ 4.388822] usb 1-1.1: configuration #1 chosen from 1 choice [ 4.389108] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [ 4.389128] usb 1-1.1:1.0: uevent [ 4.389148] drivers/usb/core/inode.c: creating file '005' [ 4.389359] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 4.404239] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [ 4.477239] usb 1-1.2: new full speed USB device using ehci_hcd and address 6 [ 4.573046] usb 1-1.2: ep0 maxpacket = 8 [ 4.574585] usb 1-1.2: default language 0x0409 [ 4.574968] usb 1-1.2: New USB device found, idVendor=0a5c, idProduct=4500 [ 4.575085] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.575263] usb 1-1.2: Product: BCM2046B1 [ 4.575368] usb 1-1.2: Manufacturer: Broadcom [ 4.575502] usb 1-1.2: uevent [ 4.575510] usb 1-1.2: usb_probe_device [ 4.575512] usb 1-1.2: configuration #1 chosen from 1 choice [ 4.575719] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 4.575742] usb 1-1.2:1.0: uevent [ 4.575758] hub 1-1.2:1.0: usb_probe_interface [ 4.575760] hub 1-1.2:1.0: usb_probe_interface - got id [ 4.575763] hub 1-1.2:1.0: USB hub found [ 4.575968] hub 1-1.2:1.0: 3 ports detected [ 4.576110] hub 1-1.2:1.0: compound device; port removable status: FFF [ 4.576112] hub 1-1.2:1.0: ganged power switching [ 4.576113] hub 1-1.2:1.0: global over-current protection [ 4.576114] hub 1-1.2:1.0: power on to power good time: 100ms [ 4.576359] hub 1-1.2:1.0: local power source is good [ 4.576361] hub 1-1.2:1.0: no over-current condition exists [ 4.576364] hub 1-1.2:1.0: enabling power on all ports [ 4.576756] drivers/usb/core/inode.c: creating file '006' [ 4.576797] hub 1-1:1.0: state 7 ports 2 chg 0000 evt 0004 [ 4.647200] mount used greatest stack depth: 3520 bytes left [ 4.677261] hub 1-1.2:1.0: port 1: status 0101 change 0001 [ 4.677495] hub 1-1.2:1.0: port 2: status 0101 change 0001 [ 4.777056] usb 1-1.2: link qh128-0601/ffff88007a9f43c0 start 127 [1/2 us] [ 4.777065] hub 1-1.2:1.0: state 7 ports 3 chg 0006 evt 0000 [ 4.777216] hub 1-1.2:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 4.805412] ieee1394: Host added: ID:BUS[0-00:1023] GUID[314fc00010e571e1] [ 4.849239] usb 1-1.2.1: new full speed USB device using ehci_hcd and address 7 [ 4.941056] usb 1-1.2.1: ep0 maxpacket = 8 [ 4.943970] usb 1-1.2.1: skipped 1 descriptor after interface [ 4.943974] usb 1-1.2.1: New USB device found, idVendor=413c, idProduct=8153 [ 4.944115] usb 1-1.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.944329] usb 1-1.2.1: uevent [ 4.944338] usb 1-1.2.1: usb_probe_device [ 4.944340] usb 1-1.2.1: configuration #1 chosen from 1 choice [ 4.944613] usb 1-1.2.1: adding 1-1.2.1:1.0 (config #1, interface 0) [ 4.944634] usb 1-1.2.1:1.0: uevent [ 4.944656] usbhid 1-1.2.1:1.0: usb_probe_interface [ 4.944659] usbhid 1-1.2.1:1.0: usb_probe_interface - got id [ 4.946224] input: HID 413c:8153 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input7 [ 4.965070] usb 1-1.2.1: link qh8-3008/ffff88007a9f4500 start 7 [1/2 us] [ 4.981092] generic-usb 0003:413C:8153.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8153] on usb-0000:00:1a.7-1.2.1/input0 [ 4.981384] drivers/usb/core/inode.c: creating file '007' [ 4.981620] hub 1-1.2:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 5.052250] usb 1-1.2.2: new full speed USB device using ehci_hcd and address 8 [ 5.145047] usb 1-1.2.2: ep0 maxpacket = 8 [ 5.148616] usb 1-1.2.2: skipped 1 descriptor after interface [ 5.148620] usb 1-1.2.2: skipped 1 descriptor after endpoint [ 5.148623] usb 1-1.2.2: New USB device found, idVendor=413c, idProduct=8154 [ 5.148739] usb 1-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.148952] usb 1-1.2.2: uevent [ 5.148959] usb 1-1.2.2: usb_probe_device [ 5.148961] usb 1-1.2.2: configuration #1 chosen from 1 choice [ 5.149238] usb 1-1.2.2: adding 1-1.2.2:1.0 (config #1, interface 0) [ 5.149262] usb 1-1.2.2:1.0: uevent [ 5.149283] usbhid 1-1.2.2:1.0: usb_probe_interface [ 5.149286] usbhid 1-1.2.2:1.0: usb_probe_interface - got id [ 5.152009] input: HID 413c:8154 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input8 [ 5.184100] generic-usb 0003:413C:8154.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8154] on usb-0000:00:1a.7-1.2.2/input0 [ 5.184310] drivers/usb/core/inode.c: creating file '008' [ 5.184336] hub 1-1.2:1.0: state 7 ports 3 chg 0000 evt 0004 [ 5.805050] hub 3-0:1.0: hub_suspend [ 5.805056] usb usb3: bus auto-suspend [ 5.805058] usb usb3: suspend_rh [ 5.816054] hub 2-0:1.0: hub_suspend [ 5.816059] usb usb2: bus auto-suspend [ 5.816062] ehci_hcd 0000:00:1d.7: suspend root hub [ 5.816085] hub 4-0:1.0: hub_suspend [ 5.816088] usb usb4: bus auto-suspend [ 5.816091] usb usb4: suspend_rh [ 5.816107] hub 6-0:1.0: hub_suspend [ 5.816110] usb usb6: bus auto-suspend [ 5.816112] usb usb6: suspend_rh [ 5.816128] hub 7-0:1.0: hub_suspend [ 5.816132] usb usb7: bus auto-suspend [ 5.816134] usb usb7: suspend_rh [ 5.816150] hub 8-0:1.0: hub_suspend [ 5.816153] usb usb8: bus auto-suspend [ 5.816155] usb usb8: suspend_rh [ 8.523772] udevd version 124 started [ 8.581907] usb usb3: uevent [ 8.581925] usb 3-0:1.0: uevent [ 8.582017] usb usb4: uevent [ 8.582034] usb 4-0:1.0: uevent [ 8.582124] usb usb5: uevent [ 8.582142] usb 5-0:1.0: uevent [ 8.582176] usb 5-1: uevent [ 8.582194] usb 5-1:0.0: uevent [ 8.582260] usb 5-1:0.1: uevent [ 8.582398] usb usb1: uevent [ 8.582415] usb 1-0:1.0: uevent [ 8.582449] usb 1-1: uevent [ 8.582466] usb 1-1.1: uevent [ 8.582485] usb 1-1.1:1.0: uevent [ 8.582521] usb 1-1.2: uevent [ 8.582539] usb 1-1.2.1: uevent [ 8.582558] usb 1-1.2.1:1.0: uevent [ 8.582695] usb 1-1.2.2: uevent [ 8.582715] usb 1-1.2.2:1.0: uevent [ 8.582865] usb 1-1.2:1.0: uevent [ 8.582918] usb 1-1:1.0: uevent [ 8.582968] usb 1-6: uevent [ 8.582985] usb 1-6:1.0: uevent [ 8.583021] usb 1-6:1.1: uevent [ 8.583707] usb usb6: uevent [ 8.583726] usb 6-0:1.0: uevent [ 8.583817] usb usb7: uevent [ 8.583835] usb 7-0:1.0: uevent [ 8.583926] usb usb8: uevent [ 8.583944] usb 8-0:1.0: uevent [ 8.584038] usb usb2: uevent [ 8.584056] usb 2-0:1.0: uevent [ 8.647860] ACPI: AC Adapter [AC] (on-line) [ 8.656923] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input9 [ 8.668955] ACPI: Lid Switch [LID] [ 8.703693] ACPI: Battery Slot [BAT0] (battery present) [ 8.703860] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input10 [ 8.728077] ACPI: Power Button (CM) [PBTN] [ 8.728246] ACPI: Battery Slot [BAT1] (battery absent) [ 8.728410] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input11 [ 8.752075] ACPI: Sleep Button (CM) [SBTN] [ 8.775649] usb usb2: usb auto-resume [ 8.775653] ehci_hcd 0000:00:1d.7: resume root hub [ 8.801033] hub 2-0:1.0: hub_resume [ 8.801107] usb usb8: usb auto-resume [ 8.801110] usb usb8: wakeup_rh [ 8.801117] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 8.841016] hub 8-0:1.0: hub_resume [ 8.841080] usb usb7: usb auto-resume [ 8.841082] usb usb7: wakeup_rh [ 8.841088] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.881013] hub 7-0:1.0: hub_resume [ 8.881077] usb usb6: usb auto-resume [ 8.881080] usb usb6: wakeup_rh [ 8.881087] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.921015] hub 6-0:1.0: hub_resume [ 8.921293] usb usb4: usb auto-resume [ 8.921295] usb usb4: wakeup_rh [ 8.921303] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.961014] hub 4-0:1.0: hub_resume [ 8.961073] usb usb3: usb auto-resume [ 8.961075] usb usb3: wakeup_rh [ 8.961081] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.001047] hub 3-0:1.0: hub_resume [ 9.001149] usbhid 1-1.2.2:1.0: disconnect by usbfs [ 9.001242] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.029191] usb 1-1.2.2: usbfs: process 2074 (hid2hci) did not claim interface 0 before use [ 9.064116] hub 1-1.2:1.0: state 7 ports 3 chg 0000 evt 0008 [ 9.064485] hub 1-1.2:1.0: port 3, status 0101, change 0001, 12 Mb/s [ 9.193257] hub 1-1.2:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 [ 9.265248] usb 1-1.2.3: new full speed USB device using ehci_hcd and address 9 [ 9.359746] usb 1-1.2.3: skipped 1 descriptor after interface [ 9.359999] usb 1-1.2.3: default language 0x0409 [ 9.360873] usb 1-1.2.3: New USB device found, idVendor=413c, idProduct=8152 [ 9.361321] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.362084] usb 1-1.2.3: Product: Dell Wireless 410 Bluetooth + UWB Mini-card [ 9.362531] usb 1-1.2.3: Manufacturer: Dell Computer Corp [ 9.363027] usb 1-1.2.3: uevent [ 9.363042] usb 1-1.2.3: usb_probe_device [ 9.363044] usb 1-1.2.3: configuration #1 chosen from 1 choice [ 9.363360] usb 1-1.2.3: adding 1-1.2.3:1.0 (config #1, interface 0) [ 9.363374] usb 1-1.2.3:1.0: uevent [ 9.363463] usb 1-1.2.3: adding 1-1.2.3:1.1 (config #1, interface 1) [ 9.363475] usb 1-1.2.3:1.1: uevent [ 9.363531] usb 1-1.2.3: adding 1-1.2.3:1.2 (config #1, interface 2) [ 9.363544] usb 1-1.2.3:1.2: uevent [ 9.363600] usb 1-1.2.3: adding 1-1.2.3:1.3 (config #1, interface 3) [ 9.363612] usb 1-1.2.3:1.3: uevent [ 9.363625] drivers/usb/core/inode.c: creating file '009' [ 9.363657] hub 1-1.2:1.0: state 7 ports 3 chg 0000 evt 0008 [ 9.416864] Bluetooth: Generic Bluetooth USB driver ver 0.4 [ 9.416999] btusb 1-1.2.3:1.0: usb_probe_interface [ 9.417001] btusb 1-1.2.3:1.0: usb_probe_interface - got id [ 9.417040] btusb 1-1.2.3:1.2: usb_probe_interface [ 9.417041] btusb 1-1.2.3:1.2: usb_probe_interface - got id [ 9.417048] btusb 1-1.2.3:1.3: usb_probe_interface [ 9.417050] btusb 1-1.2.3:1.3: usb_probe_interface - got id [ 9.417060] usbcore: registered new interface driver btusb [ 9.530937] Adding 5879748k swap on /dev/sda5. Priority:-1 extents:1 across:5879748k [ 9.829686] EXT3 FS on sda1, internal journal [ 10.073058] usb usb8: suspend_rh (auto-stop) [ 10.073086] usb usb7: suspend_rh (auto-stop) [ 10.073113] usb usb6: suspend_rh (auto-stop) [ 10.073139] usb usb4: suspend_rh (auto-stop) [ 10.073165] usb usb3: suspend_rh (auto-stop) [ 10.805617] hub 2-0:1.0: hub_suspend [ 10.805624] usb usb2: bus auto-suspend [ 10.805625] ehci_hcd 0000:00:1d.7: suspend root hub [ 11.657756] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 11.804061] hub 8-0:1.0: hub_suspend [ 11.804071] usb usb8: bus auto-suspend [ 11.804073] usb usb8: suspend_rh [ 11.804091] hub 7-0:1.0: hub_suspend [ 11.804094] usb usb7: bus auto-suspend [ 11.804097] usb usb7: suspend_rh [ 11.804113] hub 6-0:1.0: hub_suspend [ 11.804117] usb usb6: bus auto-suspend [ 11.804119] usb usb6: suspend_rh [ 11.804135] hub 4-0:1.0: hub_suspend [ 11.804139] usb usb4: bus auto-suspend [ 11.804141] usb usb4: suspend_rh [ 11.804156] hub 3-0:1.0: hub_suspend [ 11.804160] usb usb3: bus auto-suspend [ 11.804162] usb usb3: suspend_rh [ 12.423826] ppdev: user-space parallel port driver [ 14.091858] usb usb2: usb auto-resume [ 14.091868] ehci_hcd 0000:00:1d.7: resume root hub [ 14.117259] hub 2-0:1.0: hub_resume [ 14.117525] usb usb8: usb auto-resume [ 14.117533] usb usb8: wakeup_rh [ 14.117553] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 14.151772] Bluetooth: L2CAP ver 2.11 [ 14.151779] Bluetooth: L2CAP socket layer initialized [ 14.157063] hub 8-0:1.0: hub_resume [ 14.157229] usb usb7: usb auto-resume [ 14.157235] usb usb7: wakeup_rh [ 14.157251] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 14.176221] Bluetooth: SCO (Voice Link) ver 0.6 [ 14.176227] Bluetooth: SCO socket layer initialized [ 14.197266] hub 7-0:1.0: hub_resume [ 14.197496] usb usb6: usb auto-resume [ 14.197504] usb usb6: wakeup_rh [ 14.197524] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 14.202484] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.212744] btusb_submit_intr_urb: hci0 urb ffff88007788c6c0 submission failed (28) [ 14.237256] hub 6-0:1.0: hub_resume [ 14.238317] usb usb4: usb auto-resume [ 14.238324] usb usb4: wakeup_rh [ 14.238346] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 14.276269] hub 4-0:1.0: hub_resume [ 14.276484] usb usb3: usb auto-resume [ 14.276491] usb usb3: wakeup_rh [ 14.276510] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 14.316076] hub 3-0:1.0: hub_resume [ 14.316406] usbfs 1-1.2.2:1.0: disconnect by usbfs [ 14.316430] usb 1-1.2.2: usbfs: process 3749 (hid2hci) did not claim interface 0 before use [ 14.316468] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 14.343621] Bluetooth: RFCOMM socket layer initialized [ 14.343628] Bluetooth: RFCOMM ver 1.10 [ 15.281037] usb usb8: suspend_rh (auto-stop) [ 15.281075] usb usb7: suspend_rh (auto-stop) [ 15.281107] usb usb6: suspend_rh (auto-stop) [ 15.281137] usb usb4: suspend_rh (auto-stop) [ 15.529027] usb usb3: suspend_rh (auto-stop) [ 16.805016] hub 2-0:1.0: hub_suspend [ 16.805023] usb usb2: bus auto-suspend [ 16.805025] ehci_hcd 0000:00:1d.7: suspend root hub [ 16.805047] hub 8-0:1.0: hub_suspend [ 16.805049] usb usb8: bus auto-suspend [ 16.805051] usb usb8: suspend_rh [ 16.805065] hub 7-0:1.0: hub_suspend [ 16.805067] usb usb7: bus auto-suspend [ 16.805068] usb usb7: suspend_rh [ 16.805082] hub 6-0:1.0: hub_suspend [ 16.805084] usb usb6: bus auto-suspend [ 16.805085] usb usb6: suspend_rh [ 16.805099] hub 4-0:1.0: hub_suspend [ 16.805101] usb usb4: bus auto-suspend [ 16.805102] usb usb4: suspend_rh [ 16.805117] hub 3-0:1.0: hub_suspend [ 16.805119] usb usb3: bus auto-suspend [ 16.805120] usb usb3: suspend_rh [ 17.355706] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 18.145925] set status page addr 0x01fff000 [ 18.145948] [drm:i915_set_status_page] *ERROR* can not ioremap virtual address for G33 hw status page [ 18.492672] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [ 18.549165] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [ 18.550031] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.837798] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 21.838030] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.797035] eth0: no IPv6 routers present -andy -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists