linux-kernel - Re: Linux 2.6.29-rc6

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1235684809.6811.5.camel@localhost.localdomain>
Date:	Thu, 26 Feb 2009 13:46:49 -0800
From:	john stultz <johnstul@...ibm.com>
To:	Jesper Krogh <jesper@...gh.cc>
Cc:	Linus Torvalds <torvalds@...ux-foundation.org>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Thomas Gleixner <tglx@...utronix.de>
Subject: Re: Linux 2.6.29-rc6

On Thu, 2009-02-26 at 22:35 +0100, Jesper Krogh wrote:
> john stultz wrote:
> > On Thu, Feb 26, 2009 at 12:43 PM, Jesper Krogh <jesper@...gh.cc> wrote:
> >> Linus Torvalds wrote:
> >>> On Thu, 26 Feb 2009, Jesper Krogh wrote:
> >>>> 2.6.26.8 doesnt have this problem.
> >>>>
> >>>> The "current_clocsource" is the same on both systems.
> >>>>
> >>>> $ cat /sys/devices/system/clocksource/clocksource0/current_clocksource
> >>>> tsc
> >>> What does the frequency calibrate to? It should be in the dmesg. Does it
> >>> differ by a big amount?
> >> Non-working:
> >> $ dmesg | grep -i freq
> >> [    0.004007] Calibrating delay loop (skipped), value calculated using
> >> timer frequency.. 4620.05 BogoMIPS (lpj=9240104)
> >>
> >> 2.6.26.8 doesn't have that information.
> > 
> > I'm surprised the clocksource watchdog isn't catching it.
> > 
> > What's the output from:
> > cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> 
> $ cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> tsc acpi_pm jiffies

Hmm. Does booting w/ "clocksourc=acpi_pm" also show the severe (~550ppm,
which NTP can't handle) drift?

>>From the dmesg, I don't see any major calibration difference right off. 

So I'd suspect something like TSC halting in idle could be causing
problems, but the watchdog should catch that as well. My only guess at
this point is that the ACPI PM is halting in idle along with the TSC. 

And you said this only happens under load? 

-john


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/