Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.25-0.204.rc8.git4.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Mon Apr 7 10:25:52 EDT 2008 Command line: ro root=UUID=aa77bc4f-ce1e-46c2-ab72-8e693c722055 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 0000000000090000 (ACPI NVS) BIOS-e820: 0000000000090000 - 00000000000a0000 (usable) BIOS-e820: 00000000000a0000 - 00000000000c0000 (reserved) BIOS-e820: 0000000000100000 - 000000007eef0000 (usable) BIOS-e820: 000000007eef0000 - 000000007f0f1000 (ACPI NVS) BIOS-e820: 000000007f0f1000 - 000000007fe53000 (usable) BIOS-e820: 000000007fe53000 - 000000007fe79000 (reserved) BIOS-e820: 000000007fe79000 - 000000007fe89000 (usable) BIOS-e820: 000000007fe89000 - 000000007feb3000 (reserved) BIOS-e820: 000000007feb3000 - 000000007feb9000 (usable) BIOS-e820: 000000007feb9000 - 000000007febf000 (reserved) BIOS-e820: 000000007febf000 - 000000007fed2000 (usable) BIOS-e820: 000000007fed2000 - 000000007fed4000 (ACPI NVS) BIOS-e820: 000000007fed4000 - 000000007fed7000 (ACPI data) BIOS-e820: 000000007fed7000 - 000000007feda000 (ACPI NVS) BIOS-e820: 000000007feda000 - 000000007fedb000 (ACPI data) BIOS-e820: 000000007fedb000 - 000000007feef000 (ACPI NVS) BIOS-e820: 000000007feef000 - 000000007feff000 (ACPI data) BIOS-e820: 000000007feff000 - 0000000080000000 (reserved) BIOS-e820: 00000000f00f8000 - 00000000f00f9000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fffa0000 - 00000000fffd0000 (reserved) Entering add_active_range(0, 0, 143) 0 entries of 3200 used Entering add_active_range(0, 144, 160) 1 entries of 3200 used Entering add_active_range(0, 256, 519920) 2 entries of 3200 used Entering add_active_range(0, 520433, 523859) 3 entries of 3200 used Entering add_active_range(0, 523897, 523913) 4 entries of 3200 used Entering add_active_range(0, 523955, 523961) 5 entries of 3200 used Entering add_active_range(0, 523967, 523986) 6 entries of 3200 used end_pfn_map = 1048528 EFI v1.10 by Apple ACPI=0x7fefe000 ACPI 2.0=0x7fefe014 SMBIOS=0x7fed3000 Kernel-defined memdescdoesn't match the one from EFI! EFI: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008b000) (0MB) EFI: mem01: type=2, attr=0xf, range=[0x000000000008b000-0x000000000008d000) (0MB) EFI: mem02: type=7, attr=0xf, range=[0x000000000008d000-0x000000000008f000) (0MB) EFI: mem03: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB) EFI: mem04: type=7, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB) EFI: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x000000007b677000) (1973MB) EFI: mem06: type=2, attr=0xf, range=[0x000000007b677000-0x000000007b679000) (0MB) EFI: mem07: type=7, attr=0xf, range=[0x000000007b679000-0x000000007b67c000) (0MB) EFI: mem08: type=2, attr=0xf, range=[0x000000007b67c000-0x000000007c728000) (16MB) EFI: mem09: type=1, attr=0xf, range=[0x000000007c728000-0x000000007c760000) (0MB) EFI: mem10: type=2, attr=0xf, range=[0x000000007c760000-0x000000007c7ea000) (0MB) EFI: mem11: type=4, attr=0xf, range=[0x000000007c7ea000-0x000000007ca57000) (2MB) EFI: mem12: type=2, attr=0xf, range=[0x000000007ca57000-0x000000007ca9a000) (0MB) EFI: mem13: type=1, attr=0xf, range=[0x000000007ca9a000-0x000000007cab6000) (0MB) EFI: mem14: type=7, attr=0xf, range=[0x000000007cab6000-0x000000007d39c000) (8MB) EFI: mem15: type=2, attr=0xf, range=[0x000000007d39c000-0x000000007d70d000) (3MB) EFI: mem16: type=4, attr=0xf, range=[0x000000007d70d000-0x000000007ea40000) (19MB) EFI: mem17: type=7, attr=0xf, range=[0x000000007ea40000-0x000000007ea4f000) (0MB) EFI: mem18: type=4, attr=0xf, range=[0x000000007ea4f000-0x000000007ea78000) (0MB) EFI: mem19: type=7, attr=0xf, range=[0x000000007ea78000-0x000000007ea79000) (0MB) EFI: mem20: type=4, attr=0xf, range=[0x000000007ea79000-0x000000007eb0d000) (0MB) EFI: mem21: type=7, attr=0xf, range=[0x000000007eb0d000-0x000000007ec02000) (0MB) EFI: mem22: type=4, attr=0xf, range=[0x000000007ec02000-0x000000007eef0000) (2MB) EFI: mem23: type=10, attr=0xf, range=[0x000000007eef0000-0x000000007f0f1000) (2MB) EFI: mem24: type=4, attr=0xf, range=[0x000000007f0f1000-0x000000007f1cc000) (0MB) EFI: mem25: type=7, attr=0xf, range=[0x000000007f1cc000-0x000000007f1cd000) (0MB) EFI: mem26: type=4, attr=0xf, range=[0x000000007f1cd000-0x000000007fc72000) (10MB) EFI: mem27: type=7, attr=0xf, range=[0x000000007fc72000-0x000000007fcd0000) (0MB) EFI: mem28: type=3, attr=0xf, range=[0x000000007fcd0000-0x000000007fe4a000) (1MB) EFI: mem29: type=7, attr=0xf, range=[0x000000007fe4a000-0x000000007fe53000) (0MB) EFI: mem30: type=5, attr=0x800000000000000f, range=[0x000000007fe53000-0x000000007fe79000) (0MB) EFI: mem31: type=7, attr=0xf, range=[0x000000007fe79000-0x000000007fe89000) (0MB) EFI: mem32: type=6, attr=0x800000000000000f, range=[0x000000007fe89000-0x000000007feb3000) (0MB) EFI: mem33: type=7, attr=0xf, range=[0x000000007feb3000-0x000000007feb9000) (0MB) EFI: mem34: type=0, attr=0xf, range=[0x000000007feb9000-0x000000007febf000) (0MB) EFI: mem35: type=7, attr=0xf, range=[0x000000007febf000-0x000000007fed2000) (0MB) EFI: mem36: type=10, attr=0xf, range=[0x000000007fed2000-0x000000007fed4000) (0MB) EFI: mem37: type=9, attr=0xf, range=[0x000000007fed4000-0x000000007fed7000) (0MB) EFI: mem38: type=10, attr=0xf, range=[0x000000007fed7000-0x000000007feda000) (0MB) EFI: mem39: type=9, attr=0xf, range=[0x000000007feda000-0x000000007fedb000) (0MB) EFI: mem40: type=10, attr=0xf, range=[0x000000007fedb000-0x000000007feef000) (0MB) EFI: mem41: type=9, attr=0xf, range=[0x000000007feef000-0x000000007feff000) (0MB) EFI: mem42: type=6, attr=0x800000000000000f, range=[0x000000007feff000-0x000000007ff00000) (0MB) EFI: mem43: type=0, attr=0x8000000000000000, range=[0x00000000000a0000-0x00000000000c0000) (0MB) EFI: mem44: type=0, attr=0x8000000000000000, range=[0x000000007ff00000-0x0000000080000000) (1MB) EFI: mem45: type=11, attr=0x8000000000000000, range=[0x00000000f00f8000-0x00000000f00f9000) (0MB) EFI: mem46: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) EFI: mem47: type=11, attr=0x8000000000000000, range=[0x00000000fffa0000-0x00000000fffd0000) (0MB) DMI 2.4 present. ACPI: RSDP 7FEFE014, 0024 (r2 APPLE ) ACPI: XSDT 7FEFE1C0, 007C (r1 APPLE Apple00 70 1000013) ACPI: FACP 7FEFC000, 00F4 (r3 APPLE Apple00 70 Loki 5F) ACPI: DSDT 7FEF1000, 48A8 (r1 APPLE MacBookP 30001 INTL 20061109) ACPI: FACS 7FEDB000, 0040 ACPI: HPET 7FEFB000, 0038 (r1 APPLE Apple00 1 Loki 5F) ACPI: APIC 7FEFA000, 0068 (r1 APPLE Apple00 1 Loki 5F) ACPI: MCFG 7FEF9000, 003C (r1 APPLE Apple00 1 Loki 5F) ACPI: ASF! 7FEF8000, 00A5 (r32 APPLE Apple00 1 Loki 5F) ACPI: SBST 7FEF7000, 0030 (r1 APPLE Apple00 1 Loki 5F) ACPI: ECDT 7FEF6000, 0053 (r1 APPLE Apple00 1 Loki 5F) ACPI: SSDT 7FEDA000, 0137 (r1 APPLE SataAhci 1000 INTL 20061109) ACPI: SSDT 7FED6000, 04DC (r1 APPLE CpuPm 3000 INTL 20061109) ACPI: SSDT 7FED5000, 025F (r1 APPLE Cpu0Tst 3000 INTL 20061109) ACPI: SSDT 7FED4000, 00A6 (r1 APPLE Cpu1Tst 3000 INTL 20061109) ACPI: DMI detected: Apple No NUMA configuration found Faking a node at 0000000000000000-000000007fed2000 Entering add_active_range(0, 0, 143) 0 entries of 3200 used Entering add_active_range(0, 144, 160) 1 entries of 3200 used Entering add_active_range(0, 256, 519920) 2 entries of 3200 used Entering add_active_range(0, 520433, 523859) 3 entries of 3200 used Entering add_active_range(0, 523897, 523913) 4 entries of 3200 used Entering add_active_range(0, 523955, 523961) 5 entries of 3200 used Entering add_active_range(0, 523967, 523986) 6 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007fed2000 NODE_DATA [000000000000c000 - 0000000000013fff] bootmap [0000000000014000 - 0000000000023fdf] pages 10 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-75a73b] TEXT DATA BSS early res: 3 [7d39c000-7d70cd69] RAMDISK early res: 4 [8000-bfff] PGTABLE No mptable found. [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[7] active PFN ranges 0: 0 -> 143 0: 144 -> 160 0: 256 -> 519920 0: 520433 -> 523859 0: 523897 -> 523913 0: 523955 -> 523961 0: 523967 -> 523986 On node 0 totalpages: 523290 DMA zone: 56 pages used for memmap DMA zone: 1377 pages reserved DMA zone: 2566 pages, LIFO batch:0 DMA32 zone: 7107 pages used for memmap DMA32 zone: 512184 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000008f000 - 0000000000090000 PM: Registered nosave memory: 00000000000a0000 - 00000000000c0000 PM: Registered nosave memory: 00000000000c0000 - 0000000000100000 PM: Registered nosave memory: 000000007eef0000 - 000000007f0f1000 PM: Registered nosave memory: 000000007fe53000 - 000000007fe79000 PM: Registered nosave memory: 000000007fe89000 - 000000007feb3000 PM: Registered nosave memory: 000000007feb9000 - 000000007febf000 Allocating PCI resources starting at 88000000 (gap: 80000000:700f8000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 43120 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 514750 Policy zone: DMA32 Kernel command line: ro root=UUID=aa77bc4f-ce1e-46c2-ab72-8e693c722055 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 2194.497 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2055152k/2095944k available (2652k kernel code, 38008k reserved, 1391k data, 352k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 4392.83 BogoMIPS (lpj=2196417) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 12468724 Detected 12.468 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4388.80 BogoMIPS (lpj=2194400) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=224 bytes sizeof(task_struct)=6256 bytes CPU0 attaching sched-domain: domain 0: span 00000000,00000003 groups: 00000000,00000001 00000000,00000002 domain 1: span 00000000,00000003 groups: 00000000,00000003 CPU1 attaching sched-domain: domain 0: span 00000000,00000003 groups: 00000000,00000002 00000000,00000001 domain 1: span 00000000,00000003 groups: 00000000,00000003 net_namespace: 1016 bytes Time: 18:18:25 Date: 02/18/09 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered ACPI: EC: non-query interrupt received, switching to interrupt mode usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR:parse DMAR table failure. PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved system 00:07: ioport range 0x680-0x69f has been reserved system 00:07: ioport range 0x800-0x80f has been reserved system 00:07: ioport range 0x810-0x817 has been reserved system 00:07: ioport range 0x400-0x47f has been reserved system 00:07: ioport range 0x500-0x53f has been reserved system 00:07: ioport range 0x1640-0x164f has been reserved PCI: Bridge: 0000:00:01.0 IO window: 5000-5fff MEM window: 0x90000000-0x930fffff PREFETCH window: 0x0000000080000000-0x000000008fffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: 0x9b400000-0x9b4fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: 0x97400000-0x9b3fffff PREFETCH window: 0x0000000093100000-0x00000000970fffff PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: 0x97300000-0x973fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: 3000-3fff MEM window: 0x97200000-0x972fffff PREFETCH window: 0x000000009b600000-0x000000009b6fffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 0x97100000-0x971fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Enabling device 0000:00:1c.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Enabling device 0000:00:1c.2 (0000 -> 0003) ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3523k freed audit: initializing netlink socket (disabled) type=2000 audit(1234981105.471:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1a.0: Performing full reset pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1a.1: Performing full reset pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1d.0: Performing full reset pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1d.1: Performing full reset pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1d.2: Performing full reset PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] Allocate Port Service[0000:00:1c.5:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 efifb: dmi detected MacBookPro3,1 - framebuffer at 0000000080030000 (1440x900, stride 8192) efifb: probing for efifb efifb: framebuffer at 0x80030000, mapped to 0xffffc20000900000, using 7200k, total 7200k efifb: mode is 1440x900x32, linelength=8192, pages=1 efifb: scrolling: redraw efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Console: switching to colour frame buffer device 180x56 fb0: EFI VGA frame buffer device ACPI: SSDT 7FED9A98, 02FE (r1 APPLE Cpu0Ist 3000 INTL 20061109) ACPI: SSDT 7FED7C18, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20061109) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7FED8F18, 00C8 (r1 APPLE Cpu1Ist 3000 INTL 20061109) ACPI: SSDT 7FED7F18, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20061109) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 Marking TSC unstable due to TSC halts in idle usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 registered taskstats version 1 Magic number: 13:507:342 Freeing unused kernel memory: 352k freed Write protecting the kernel read-only data: 1120k ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 PCI: Enabling device 0000:00:1a.7 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4 ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Clocksource tsc unstable (delta = -249790719 ns) ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: supports USB remote wakeup ehci_hcd 0000:00:1a.7: irq 21, io mem 0x9b504c00 ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller drivers/usb/core/inode.c: creating file '002' ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: supports USB remote wakeup ehci_hcd 0000:00:1d.7: irq 20, io mem 0x9b504800 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: Single TT hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 2-0:1.0: power on to power good time: 20ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:1a.7: port 1 full speed --> companion ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 1 not reset yet, waiting 50ms drivers/usb/core/inode.c: creating file '001' usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 ehci_hcd ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002 hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 4, status 0501, change 0001, 480 Mb/s usb usb2: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 80 td 96 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller hub 2-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501 drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: detected 2 ports uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1a.0: Performing full reset uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0 usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice ehci_hcd 0000:00:1d.7: port 4 high speed ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub usb 2-4: new high speed USB device using ehci_hcd and address 2 ehci_hcd 0000:00:1d.7: port 4 high speed ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT drivers/usb/core/inode.c: creating file '001' usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: detected 2 ports usb 2-4: skipped 1 descriptor after configuration usb 2-4: skipped 5 descriptors after interface usb 2-4: skipped 1 descriptor after endpoint usb 2-4: skipped 22 descriptors after interface uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1a.1: Performing full reset usb 2-4: default language 0x0409 uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0 usb usb4: default language 0x0409 usb usb4: uevent usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found usb 2-4: uevent usb 2-4: usb_probe_device usb 2-4: configuration #1 chosen from 1 choice hub 4-0:1.0: 2 ports detected usb 2-4: adding 2-4:1.0 (config #1, interface 0) usb 2-4:1.0: uevent usb 2-4: adding 2-4:1.1 (config #1, interface 1) usb 2-4:1.1: uevent usb 2-4: adding 2-4:1.2 (config #1, interface 2) usb 2-4:1.2: uevent drivers/usb/core/inode.c: creating file '002' usb 2-4: New USB device found, idVendor=05ac, idProduct=8502 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-4: Product: Built-in iSight usb 2-4: Manufacturer: Apple Inc. usb 2-4: SerialNumber: C07BA2BF3B1A93DB (03.00) ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001403 POWER sig=k CSC CONNECT hub 2-0:1.0: port 5, status 0501, change 0001, 480 Mb/s hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub hub 2-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:1d.7: port 5 low speed --> companion drivers/usb/core/inode.c: creating file '001' usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 6, status 0501, change 0001, 480 Mb/s usb usb4: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller drivers/usb/core/inode.c: creating file '005' uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.0: Performing full reset uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080 hub 2-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 usb usb5: default language 0x0409 usb usb5: uevent usb usb5: usb_probe_device usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: uevent hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good hub 5-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.7: port 6 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT hub 2-0:1.0: port 6 not reset yet, waiting 50ms ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1a.0: port 1 portsc 009b,00 hub 3-0:1.0: port 1, status 0101, change 0003, 12 Mb/s drivers/usb/core/inode.c: creating file '001' usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '006' uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.1: Performing full reset uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060 usb usb6: default language 0x0409 usb 3-1: new full speed USB device using uhci_hcd and address 2 usb usb6: uevent usb usb6: usb_probe_device usb usb6: configuration #1 chosen from 1 choice usb usb6: adding 6-0:1.0 (config #1, interface 0) usb 6-0:1.0: uevent hub 6-0:1.0: usb_probe_interface hub 6-0:1.0: usb_probe_interface - got id hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected hub 6-0:1.0: standalone hub hub 6-0:1.0: no power switching (usb 1.0) hub 6-0:1.0: individual port over-current protection hub 6-0:1.0: power on to power good time: 2ms hub 6-0:1.0: local power source is good hub 6-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller drivers/usb/core/inode.c: creating file '007' uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.2: Performing full reset uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040 usb usb7: default language 0x0409 usb usb7: uevent usb usb7: usb_probe_device usb usb7: configuration #1 chosen from 1 choice usb usb7: adding 7-0:1.0 (config #1, interface 0) usb 7-0:1.0: uevent hub 7-0:1.0: usb_probe_interface hub 7-0:1.0: usb_probe_interface - got id hub 7-0:1.0: USB hub found usb 3-1: skipped 1 descriptor after interface usb 3-1: skipped 1 descriptor after interface usb 3-1: uevent hub 7-0:1.0: 2 ports detected usb 3-1: usb_probe_device usb 3-1: configuration #1 chosen from 1 choice hub 7-0:1.0: standalone hub hub 7-0:1.0: no power switching (usb 1.0) hub 7-0:1.0: individual port over-current protection hub 7-0:1.0: power on to power good time: 2ms hub 7-0:1.0: local power source is good hub 7-0:1.0: trying to enable port power on non-switchable hub usb 3-1: adding 3-1:1.0 (config #1, interface 0) usb 3-1:1.0: uevent usbhid 3-1:1.0: usb_probe_interface usbhid 3-1:1.0: usb_probe_interface - got id input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1 uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 1, phase 0, 23 us input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1 usb 3-1: adding 3-1:1.1 (config #1, interface 1) usb 3-1:1.1: uevent usbhid 3-1:1.1: usb_probe_interface usbhid 3-1:1.1: usb_probe_interface - got id input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input2 drivers/usb/core/inode.c: creating file '001' usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1 drivers/usb/core/inode.c: creating file '002' usb 3-1: New USB device found, idVendor=05ac, idProduct=1000 usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004 uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00 hub 6-0:1.0: port 2, status 0100, change 0003, 12 Mb/s usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb4: suspend_rh (auto-stop) usb usb7: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:1d.2: port 1 portsc 01ab,00 hub 7-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. hub 7-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18 usb 7-1: new low speed USB device using uhci_hcd and address 2 usb 7-1: skipped 1 descriptor after interface usb 7-1: default language 0x0409 usb 7-1: uevent usb 7-1: usb_probe_device usb 7-1: configuration #1 chosen from 1 choice usb usb5: suspend_rh (auto-stop) usb 7-1: adding 7-1:1.0 (config #1, interface 0) usb 7-1:1.0: uevent usbhid 7-1:1.0: usb_probe_interface usbhid 7-1:1.0: usb_probe_interface - got id drivers/usb/core/file.c: looking for a minor, starting at 96 hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1 drivers/usb/core/inode.c: creating file '002' usb 7-1: New USB device found, idVendor=05ac, idProduct=8242 usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-1: Product: IR Receiver usb 7-1: Manufacturer: Apple Computer, Inc. uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00 hub 7-0:1.0: port 2, status 0101, change 0003, 12 Mb/s hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:1a.7: suspend root hub usb 7-2: new full speed USB device using uhci_hcd and address 3 usb 7-2: ep0 maxpacket = 8 usb 7-2: skipped 1 descriptor after interface usb 7-2: skipped 1 descriptor after interface usb 7-2: skipped 1 descriptor after interface usb 7-2: default language 0x0409 usb 7-2: uevent usb 7-2: usb_probe_device usb 7-2: configuration #1 chosen from 1 choice usb 7-2: adding 7-2:1.0 (config #1, interface 0) usb 7-2:1.0: uevent usbhid 7-2:1.0: usb_probe_interface usbhid 7-2:1.0: usb_probe_interface - got id input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input3 uhci_hcd 0000:00:1d.2: reserve dev 3 ep83-INT, period 8, phase 4, 17 us input,hidraw3: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2 usb 7-2: adding 7-2:1.1 (config #1, interface 1) usb 7-2:1.1: uevent usbhid 7-2:1.1: usb_probe_interface usbhid 7-2:1.1: usb_probe_interface - got id usb 7-2: adding 7-2:1.2 (config #1, interface 2) usb 7-2:1.2: uevent usbhid 7-2:1.2: usb_probe_interface usbhid 7-2:1.2: usb_probe_interface - got id input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input4 uhci_hcd 0000:00:1d.2: reserve dev 3 ep84-INT, period 8, phase 4, 12 us input,hidraw4: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2 drivers/usb/core/inode.c: creating file '003' usb 7-2: New USB device found, idVendor=05ac, idProduct=021a usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-2: Product: Apple Internal Keyboard / Trackpad usb 7-2: Manufacturer: Apple Computer ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0x9b504000 port 0x9b504100 irq 2298 ata2: DUMMY ata3: DUMMY hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 usb usb6: suspend_rh (auto-stop) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off hub 4-0:1.0: hub_suspend usb usb4: bus auto-suspend usb usb4: suspend_rh hub 5-0:1.0: hub_suspend usb usb5: bus auto-suspend usb usb5: suspend_rh sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk hub 6-0:1.0: hub_suspend usb usb6: bus auto-suspend usb usb6: suspend_rh device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux:8192 avtab hash slots allocated. Num of rules:171094 SELinux:8192 avtab hash slots allocated. Num of rules:171094 security: 5 users, 12 roles, 2293 types, 115 bools, 1 sens, 1024 cats security: 72 classes, 171094 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: policy loaded with handle_unknown=allow type=1403 audit(1234981115.944:2): policy loaded auid=4294967295 ses=4294967295 usb usb3: uevent usb 3-0:1.0: uevent usb 3-1: uevent usb 3-1:1.0: uevent usb 3-1:1.1: uevent usb usb4: uevent usb 4-0:1.0: uevent usb usb1: uevent usb 1-0:1.0: uevent usb usb5: uevent usb 5-0:1.0: uevent usb usb6: uevent usb 6-0:1.0: uevent usb usb7: uevent usb 7-0:1.0: uevent usb 7-1: uevent usb 7-1:1.0: uevent usb 7-2: uevent usb 7-2:1.0: uevent usb 7-2:1.1: uevent usb 7-2:1.2: uevent usb usb2: uevent usb 2-0:1.0: uevent usb 2-4: uevent usb 2-4:1.0: uevent usb 2-4:1.1: uevent usb 2-4:1.2: uevent input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 ACPI: Power Button (FF) [PWRF] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:0c:00.0 to 64 sky2 0000:0c:00.0: v1.21 addr 0x97200000 irq 17 Yukon-EC Ultra (0xb4) rev 3 sky2 eth0: addr 00:1b:63:a0:59:d6 PCI: Enabling device 0000:0b:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:0b:00.0 to 64 ath5k_pci 0000:0b:00.0: registered as 'phy0' ath5k phy0: Device not yet supported. ACPI: PCI interrupt for device 0000:0b:00.0 disabled appletouch 7-2:1.1: usb_probe_interface appletouch 7-2:1.1: usb_probe_interface - got id appletouch: Geyser mode initialized. input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input6 usbcore: registered new interface driver appletouch ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ACPI: PCI interrupt for device 0000:00:1f.1 disabled Linux video capture interface: v2.00 ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x6108 ctl 0x611c bmdma 0x60e0 irq 21 ata5: PATA max UDMA/100 cmd 0x6100 ctl 0x6118 bmdma 0x60e8 irq 21 iTCO_vendor_support: vendor-support=0 sd 0:0:0:0: Attached scsi generic sg0 type 0 input: PC Speaker as /devices/platform/pcspkr/input/input7 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: Battery Slot [BAT0] (battery present) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input8 ACPI: Lid Switch [LID0] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input9 ACPI: AC Adapter [ADP1] (on-line) input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input10 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input11 ACPI: Sleep Button (CM) [SLPB] uvcvideo 2-4:1.0: usb_probe_interface uvcvideo 2-4:1.0: usb_probe_interface - got id uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8502) usb 2-4: link qh4-0001/ffff81007d8e6140 start 3 [1/0 us] usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) ata4.00: ATAPI: HL-DT-ST DVDRW GSA-S10N, AP09, max UDMA/33 ata4.00: configured for UDMA/33 scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRW GSA-S10N AP09 PQ: 0 ANSI: 5 scsi 3:0:0:0: Attached scsi generic sg1 type 5 PCI: Enabling device 0000:00:1f.3 (0000 -> 0003) ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 20 (level, low) -> IRQ 20 PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401 ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1 ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Switch, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Switch, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Switch, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Switch, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Switch, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped ACPI: PCI Interrupt 0000:0d:03.0[A] -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:0d:03.0, OHCI version 1.10 firewire_core: created device fw0: GUID 001cb3fffea2a2ae, S800 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 device-mapper: multipath: version 1.0.5 loaded loop: module loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda3, type ext3), uses xattr SELinux: initialized (dev sda1, type vfat), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts