| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 2 Mar 2009 17:40:29 -0700 (MST)
From: Paul Walmsley <paul@...an.com>
To: linux-arm-kernel@...ts.arm.linux.org.uk,
linux-kernel@...r.kernel.org
cc: linux-omap@...r.kernel.org, tony@...mide.com, r-woodruff2@...com,
catalin.marinas@....com
Subject: [2nd REPOST] [PATCH] ARM: MMU: add a Non-cacheable Normal executable
memory type
Hello,
this is the second repost of this patch (the previous repost was 5 Feb
2009).
This patch, or one like it, is a necessary pre-requisite for merging the
OMAP3 CORE DVFS patches. No comments have been received. Any reason why
this patch cannot be merged?
- Paul
---------- Forwarded message ----------
Date: Mon, 15 Dec 2008 14:07:07 -0700 (MST)
From: Paul Walmsley <paul@...an.com>
To: linux-arm-kernel@...ts.arm.linux.org.uk
Cc: linux-omap@...r.kernel.org, r-woodruff2@...com
Subject: [PATCH] ARM: MMU: add a Non-cacheable Normal executable memory type
This patch adds a Non-cacheable Normal ARM executable memory type,
MT_MEMORY_NONCACHED.
On OMAP3, this is used for rapid dynamic voltage/frequency scaling in the
VDD2 voltage domain. OMAP3's SDRAM controller (SDRC) is in the VDD2
voltage domain, and its clock frequency must change along with voltage.
The SDRC clock change code cannot run from SDRAM itself, since SDRAM
accesses are paused during the clock change. So the current
implementation of the DVFS code executes from OMAP on-chip SRAM, aka "OCM
RAM."
If the OCM RAM pages are marked as Cacheable, the ARM cache controller
will attempt to flush dirty cache lines to the SDRC, so it can fill those
lines with OCM RAM instruction code. The problem is that the SDRC is
paused during DVFS, and so any SDRAM access causes the ARM MPU subsystem
to hang.
TI's original solution to this problem was to mark the OCM RAM sections as
Strongly Ordered memory, thus preventing caching. This is overkill: since
the memory is marked as non-bufferable, OCM RAM writes become quite
needlessly slow. The idea of "Strongly Ordered SRAM" is also conceptually
disturbing. Previous LAKML list discussion is here:
http://www.spinics.net/lists/arm-kernel/msg54312.html
Now this memory type MT_MEMORY_NONCACHED is used by a future patch for OCM
RAM.
Signed-off-by: Paul Walmsley <paul@...an.com>
Cc: Richard Woodruff <r-woodruff2@...com>
---
arch/arm/include/asm/mach/map.h | 1 +
arch/arm/mm/mmu.c | 23 +++++++++++++++++++++++
2 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 39d949b..58cf91f 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -26,6 +26,7 @@ struct map_desc {
#define MT_HIGH_VECTORS 8
#define MT_MEMORY 9
#define MT_ROM 10
+#define MT_MEMORY_NONCACHED 11
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 7f36c82..9ad6413 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -242,6 +242,10 @@ static struct mem_type mem_types[] = {
.prot_sect = PMD_TYPE_SECT,
.domain = DOMAIN_KERNEL,
},
+ [MT_MEMORY_NONCACHED] = {
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+ .domain = DOMAIN_KERNEL,
+ },
};
const struct mem_type *get_mem_type(unsigned int type)
@@ -405,9 +409,28 @@ static void __init build_mem_type_table(void)
kern_pgprot |= L_PTE_SHARED;
vecs_pgprot |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
#endif
}
+ /*
+ * Non-cacheable Normal - intended for memory areas that must
+ * not cause dirty cache line writebacks when used
+ */
+ if (cpu_arch >= CPU_ARCH_ARMv6) {
+ if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
+ /* Non-cacheable Normal is XCB = 001 */
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+ PMD_SECT_BUFFERED;
+ } else {
+ /* For both ARMv6 and non-TEX-remapping ARMv7 */
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+ PMD_SECT_TEX(1);
+ }
+ } else {
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
+ }
+
for (i = 0; i < 16; i++) {
unsigned long v = pgprot_val(protection_map[i]);
protection_map[i] = __pgprot(v | user_pgprot);
-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists