Linux version 2.6.27.19-mb7 (root@phobos) (gcc version 4.2.4) #7 Tue Mar 3 00:26:37 CET 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000011fd0000 (usable) BIOS-e820: 0000000011fd0000 - 0000000011fdf000 (ACPI data) BIOS-e820: 0000000011fdf000 - 0000000011fe0000 (ACPI NVS) BIOS-e820: 0000000011fe0000 - 0000000012000000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) DMI 2.2 present. last_pfn = 0x11fd0 max_arch_pfn = 0x100000 kernel direct mapping tables up to 11fd0000 @ 7000-d000 RAMDISK: 00dc0000 - 00eff50c IBM Thinkpad 600 Series 2645 detected: force use of acpi=noirq ACPI: RSDP 000FD6E0, 0014 (r0 IBM ) ACPI: RSDT 11FD0000, 0028 (r1 IBM TP600R 1 0) ACPI: FACP 11FD0100, 0074 (r1 IBM TP600R 1 0) ACPI: DSDT 11FD0200, C439 (r1 IBM TP600R 106 MSFT 100000C) ACPI: FACS 11FDF000, 0040 287MB LOWMEM available. mapped low ram: 0 - 11fd0000 low ram: 00000000 - 11fd0000 bootmap 00001000 - 000033fc (7 early reservations) ==> bootmem [0000000000 - 0011fd0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 000058c054] TEXT DATA BSS ==> [0000100000 - 000058c054] #2 [0000dc0000 - 0000eff50c] RAMDISK ==> [0000dc0000 - 0000eff50c] #3 [000058d000 - 0000590000] INIT_PG_TABLE ==> [000058d000 - 0000590000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #6 [0000001000 - 0000004000] BOOTMAP ==> [0000001000 - 0000004000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00011fd0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x00011fd0 On node 0 totalpages: 73583 free_area_init_node: node 0, pgdat c050a3a0, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 69040 pages, LIFO batch:15 ACPI: PM-Timer IO Port: 0xef08 Allocating PCI resources starting at 20000000 (gap: 12000000:edfe0000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 73007 Kernel command line: auto BOOT_IMAGE=2.6.27.19-mb7 ro root=fe00 clocksource=tsc Enabling fast FPU save and restore... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PMTIMER calibration value Detected 363.957 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 285472k/294720k available (3078k kernel code, 8684k reserved, 1079k data, 276k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffffa000 - 0xfffff000 ( 20 kB) vmalloc : 0xd2800000 - 0xffff8000 ( 727 MB) lowmem : 0xc0000000 - 0xd1fd0000 ( 287 MB) .init : 0xc0512000 - 0xc0557000 ( 276 kB) .data : 0xc040189b - 0xc050f7d8 (1079 kB) .text : 0xc0100000 - 0xc040189b (3078 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay loop (skipped), value calculated using timer frequency.. 727.91 BogoMIPS (lpj=363957) Mount-cache hash table entries: 512 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Mobile Pentium II stepping 0a Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20080609 ACPI: setting ELCR to 0a00 (from 0800) net_namespace: 288 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7 PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:00.0 reg 10 32bit mmio: [40000000, 43ffffff] PCI: 0000:00:02.0 reg 10 32bit mmio: [50102000, 50102fff] pci 0000:00:02.0: supports D1 pci 0000:00:02.0: supports D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:02.0: PME# disabled PCI: 0000:00:02.1 reg 10 32bit mmio: [50101000, 50101fff] pci 0000:00:02.1: supports D1 pci 0000:00:02.1: supports D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot pci 0000:00:02.1: PME# disabled PCI: 0000:00:06.0 reg 10 32bit mmio: [50100000, 50100fff] PCI: 0000:00:06.0 reg 14 32bit mmio: [50000000, 500fffff] PCI: 0000:00:07.1 reg 20 io port: [fcf0, fcff] PCI: 0000:00:07.2 reg 20 io port: [8400, 841f] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources pci 0000:00:07.3: quirk: region ef00-ef3f claimed by PIIX4 ACPI pci 0000:00:07.3: quirk: region efa0-efaf claimed by PIIX4 SMB pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef pci 0000:00:07.3: PIIX4 devres E PIO at 0538-053f pci 0000:00:07.3: PIIX4 devres G PIO at 0130-013f pci 0000:00:07.3: PIIX4 devres I PIO at 002e-002f PCI: 0000:01:00.0 reg 10 32bit mmio: [e0000000, e0ffffff] PCI: 0000:01:00.0 reg 14 32bit mmio: [70000000, 703fffff] PCI: 0000:01:00.0 reg 18 32bit mmio: [70400000, 704fffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 PCI: bridge 0000:00:01.0 io port: [d000, dfff] PCI: bridge 0000:00:01.0 32bit mmio: [70000000, dfffffff] PCI: bridge 0000:00:01.0 32bit mmio pref: [e0000000, f7ffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT] ACPI: Power Resource [PSIO] (on) ACPI: Power Resource [PFN0] (off) ACPI: Power Resource [PVID] (on) ACPI: Power Resource [PRSD] (off) ACPI: Power Resource [PDCK] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 18 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware pci 0000:00:07.0: PIIX/ICH IRQ router [8086/7110] Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xcbfff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x11ffffff could not be reserved system 00:00: iomem range 0xfffe0000-0xffffffff could not be reserved system 00:0d: ioport range 0x15e0-0x15ef has been reserved system 00:0d: ioport range 0xef00-0xef3f has been reserved system 00:0d: ioport range 0xefa0-0xefaf has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xd000-0xdfff pci 0000:00:01.0: MEM window: 0x70000000-0xdfffffff pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000f7ffffff pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02 pci 0000:00:02.0: IO window: 0x001000-0x0010ff pci 0000:00:02.0: IO window: 0x001400-0x0014ff pci 0000:00:02.0: PREFETCH window: 0x20000000-0x23ffffff pci 0000:00:02.0: MEM window: 0x24000000-0x27ffffff pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06 pci 0000:00:02.1: IO window: 0x001800-0x0018ff pci 0000:00:02.1: IO window: 0x001c00-0x001cff pci 0000:00:02.1: PREFETCH window: 0x28000000-0x2bffffff pci 0000:00:02.1: MEM window: 0x2c000000-0x2fffffff PCI: setting IRQ 11 as level-triggered pci 0000:00:02.0: found PCI INT A -> IRQ 11 pci 0000:00:06.0: IRQ routing conflict: have IRQ 9, want IRQ 11 pci 0000:00:02.0: sharing IRQ 11 with 0000:01:00.0 pci 0000:00:02.1: found PCI INT B -> IRQ 11 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffff] bus: 01 index 0 io port: [d000, dfff] bus: 01 index 1 mmio: [70000000, dfffffff] bus: 01 index 2 mmio: [e0000000, f7ffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [1000, 10ff] bus: 02 index 1 io port: [1400, 14ff] bus: 02 index 2 mmio: [20000000, 23ffffff] bus: 02 index 3 mmio: [24000000, 27ffffff] bus: 06 index 0 io port: [1800, 18ff] bus: 06 index 1 io port: [1c00, 1cff] bus: 06 index 2 mmio: [28000000, 2bffffff] bus: 06 index 3 mmio: [2c000000, 2fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Switched to high resolution mode on CPU 0 Freeing initrd memory: 1277k freed Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 560 io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:01:00.0: Boot video device neofb 0000:01:00.0: power state changed by ACPI to D0 neofb 0000:01:00.0: found PCI INT A -> IRQ 11 neofb 0000:01:00.0: sharing IRQ 11 with 0000:00:02.0 pci 0000:00:06.0: IRQ routing conflict: have IRQ 9, want IRQ 11 neofb: mapped io at d2880000 Autodetected internal display Panel is a 1024x768 color TFT display neofb: mapped framebuffer at d2b00000 neofb v0.4.2: 2560kB VRAM, using 1024x768, 48.364kHz, 60Hz Console: switching to colour frame buffer device 128x48 fb0: MagicGraph 256A frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID0] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Generic RTC Driver v1.07 Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 440BX Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x40000000 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). [drm] Initialized drm 1.1.0 20060810 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 brd: module loaded loop: module loaded thinkpad_acpi: ThinkPad ACPI Extras v0.21 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS INET36WW, EC unknown thinkpad_acpi: acpi_bus_get_device(hotkey) failed: -19 thinkpad_acpi: disabling subdriver hotkey thinkpad_acpi: acpi_bus_get_device(bay) failed: -19 thinkpad_acpi: disabling subdriver bay Registered led device: tpacpi::power Registered led device: tpacpi:orange:batt Registered led device: tpacpi:green:batt Registered led device: tpacpi::dock_active Registered led device: tpacpi::bay_active Registered led device: tpacpi::dock_batt Registered led device: tpacpi::unknown_led Registered led device: tpacpi::standby thinkpad_acpi: CMOS NVRAM (4) and EC (0) do not agree on display brightness level input: ThinkPad Extra Buttons as /class/input/input3 Linux video capture interface: v2.00 Uniform Multi-Platform E-IDE driver piix 0000:00:07.1: IDE controller (0x8086:0x7111 rev 0x01) piix 0000:00:07.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfcf0-0xfcf7 ide1: BM-DMA at 0xfcf8-0xfcff Probing IDE interface ide0... hda: WDC WD800BEVE-00UYT0, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. hda: max request size: 512KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 Driver 'sd' needs updating - please use bus_type methods Yenta: CardBus bridge found at 0000:00:02.0 [1014:00eb] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:02.0, mfunc 0xfba97543, devctl 0x62 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000020 Yenta: CardBus bridge found at 0000:00:02.1 [1014:00eb] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:02.1, mfunc 0xfba97543, devctl 0x62 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000006 USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x00008400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.19-mb7 uhci_hcd usb usb1: SerialNumber: 0000:00:07.2 usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12 pccard: CardBus card inserted into slot 0 PCI: 0000:02:00.0 reg 10 io port: [0, ff] PCI: 0000:02:00.0 reg 14 32bit mmio: [0, 1ff] PCI: 0000:02:00.0 reg 30 32bit mmio: [5ffc0000, 5ffdffff] pci 0000:02:00.0: supports D1 pci 0000:02:00.0: supports D2 pci 0000:02:00.0: PME# supported from D1 D2 D3hot pci 0000:02:00.0: PME# disabled serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: enabling device (0000 -> 0003) r8169 0000:02:00.0: setting latency timer to 64 eth0: RTL8169sb/8110sb at 0xd283e000, 00:40:f4:f9:29:df, XID 10000000 IRQ 11 mice: PS/2 mouse device common for all mice i2c /dev entries driver device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com Bluetooth: HCI USB driver ver 2.10 usbcore: registered new interface driver hci_usb cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.17. input: AT Translated Set 2 keyboard as /class/input/input4 ALSA device list: #0: CS4236 at 0x530, irq 5, dma 1&0 TCP cubic registered NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. Using IPI Shortcut mode Freeing unused kernel memory: 276k freed IBM TrackPoint firmware: 0x0b, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udev: renamed network interface eth0 to eth1 EXT3 FS on dm-0, internal journal Adding 1048568k swap on /swap. Priority:-1 extents:265 across:1082580k r8169: eth1: link up spurious 8259A interrupt: IRQ7. ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:219 dev_watchdog+0x19f/0x1b0() NETDEV WATCHDOG: eth1 (r8169): transmit timed out Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.27.19-mb7 #7 [] warn_slowpath+0x76/0x90 [] __flow_cache_shrink+0x10/0x90 [] kmem_cache_alloc+0x39/0xa0 [] copy_skb_header+0x25/0x80 [] tcp_v4_send_check+0x40/0xe0 [] update_wall_time+0x256/0x750 [] read_tsc+0x6/0x30 [] strlcpy+0x20/0x60 [] dev_watchdog+0x0/0x1b0 [] dev_watchdog+0x19f/0x1b0 [] enqueue_task_fair+0xaf/0xd0 [] enqueue_task+0x12/0x30 [] activate_task+0x16/0x20 [] run_timer_softirq+0x10f/0x160 [] getnstimeofday+0x47/0x110 [] __do_softirq+0x42/0x90 [] do_softirq+0x27/0x30 [] irq_exit+0x45/0x70 [] do_IRQ+0x47/0x80 [] common_interrupt+0x23/0x28 [] default_idle+0x29/0x40 [] cpu_idle+0x35/0x70 ======================= ---[ end trace 00cf2b69d4cea8f9 ]--- r8169: eth1: link up r8169: eth1: link up