linux-kernel - Re: CFQ is worse than other IO schedulers in some cases

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <49B50551.1030305@cn.fujitsu.com>
Date:	Mon, 09 Mar 2009 20:02:25 +0800
From:	Shan Wei <shanwei@...fujitsu.com>
To:	Jens Axboe <jens.axboe@...cle.com>
CC:	Mike Galbraith <efault@....de>, linux-kernel@...r.kernel.org
Subject: Re: CFQ is worse than other IO schedulers in some cases

Jens Axboe said:
> On Mon, Mar 09 2009, Shan Wei wrote:
>> Mike Galbraith said:
>>> On Wed, 2009-02-18 at 14:00 +0800, Shan Wei wrote:
>>>
>>>> In sysbench(version:sysbench-0.4.10), I confirmed followings.
>>>>   - CFQ's performance is worse than other IO schedulers when only multiple
>>>>     threads test.
>>>>     (There is no difference under single thread test.)
>>>>   - It is worse than other IO scheduler when
>>>>     I used read mode. (No regression in write mode).
>>>>   - There is no difference among other IO schedulers. (e.g noop deadline)
>>>>
>>>>
>>>> The Test Result(sysbench):
>>>>    UNIT:Mb/sec
>>>>     __________________________________________________
>>>>     |   IO       |      thread  number               |  
>>>>     | scheduler  |-----------------------------------|
>>>>     |            |  1   |  3    |  5   |   7  |   9  |
>>>>     +------------|------|-------|------|------|------|
>>>>     |cfq         | 77.8 |  32.4 | 43.3 | 55.8 | 58.5 | 
>>>>     |noop        | 78.2 |  79.0 | 78.2 | 77.2 | 77.0 |
>>>>     |anticipatory| 78.2 |  78.6 | 78.4 | 77.8 | 78.1 |
>>>>     |deadline    | 76.9 |  78.4 | 77.0 | 78.4 | 77.9 |
>>>>     +------------------------------------------------+
>>> ???
>>> My Q6600 box agrees that cfq produces less throughput doing this test,
>>> but throughput here is ~flat. Disk is external SATA ST3500820AS.
>>>     _________________________________________________
>>>     |   IO       |     thread  number               |  
>>>     | scheduler  |----------------------------------|
>>>     |            |  1   |  3   |  5   |  7   |  9   |
>>>     +------------|------|------|------|------|------|
>>>     |cfq         | 84.4 | 89.1 | 91.3 | 88.8 | 88.8 |
>>>     |noop        |102.9 | 99.3 | 99.4 | 99.7 | 98.7 | 
>>>     |anticipatory|100.5 |100.1 | 99.8 | 99.7 | 99.6 | 
>>>     |deadline    | 97.9 | 98.7 | 99.5 | 99.5 | 99.3 | 
>>>     +-----------------------------------------------+
>>>
>> I have tested sysbench tool on the SATA disk under 2.6.29-rc6, 
>> and don't set RAID.
>>
>> [root@...id software]# lspci -nn
>> ...snip...
>> 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev 01)
>> 00:05.0 IDE interface [0101]: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA  [SiS] [1039:0180] (rev 01)
>>
>> The attached script(sysbench-threads.sh) execute sysbench 4 times for each I/O scheduler.
>> And the average result is below:
>>      ________________________________________
>>      |   IO       |     thread  number       |  
>>      | scheduler  |--------------------------|
>>      |            |  1     |  3     |  5     |  
>>      +------------|--------|--------|--------|
>>      |cfq         | 60.324 | 33.982 | 37.309 |
>>      |noop        | 57.391 | 60.406 | 57.355 | 
>>      |anticipatory| 58.962 | 59.342 | 56.999 | 
>>      |deadline    | 57.791 | 60.097 | 57.700 | 
>>      +---------------------------------------+
>>
>> I am wondering about the result vs Mike's.
>> why is the regression under multi-thread not present on Mike's box?
> 
> I don't know that much about the IO workload that sysbench generates, so
> it's hard to say. Since you both use SATA, I'm assuming you have write
> caching enabled on that drive? What file system and mount options are
> you using?
> 

How to see whether the write caching enabled ?

Mount the device with default options just like “mount /dev/sda3 /mnt”.
The file system of the device is ext3.

>> Jens, multi threads interleave the same file, and there may be
>> some requests that can merge but not merged on different thread queue,
>> So the CFQ performs poorly, right?
> 
> You can test that theory by editing
> block/cfq-iosched.c:cfq_allow_merge(), changing it to return 1 always.
> 

I mean that: five threads read the file like below.
Are there some requests that can merge but not merged between threads?

CFQ manages an request queue for each process.
Is it the same for thread?

> 
>        t_0   t_1   t_2   t_3   t_4   t_0   t_1
>         ^     ^     ^     ^     ^     ^     ^
>      ---|-----|-----|-----|-----|-----|-----|--------
> file | 16k | 16k | 16k | 16k | 16k | 16k | 16k | ... 
>      ------------------------------------------------ 
>                   (num-threads=5)
> 
> (t_0 stand for the first thread) 
> (the executed threads are decide by the thread scheduler)

> I'll try and rerun this test here on various bits of storage and see
> what it turns up!
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/