| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <386072610903110037k53bc659awdd6d1093ce6eaba2@mail.gmail.com>
Date: Wed, 11 Mar 2009 15:37:17 +0800
From: Bryan Wu <cooloney@...nel.org>
To: graff.yang@...il.com
Cc: samuel@...tiz.org, irda-users@...ts.sourceforge.net,
linux-kernel@...r.kernel.org, graf.yang@...log.com
Subject: Re: [PATCH] [net/irda]: new Blackfin on-chip SIR IrDA driver
On Wed, Mar 11, 2009 at 3:29 PM, <graff.yang@...il.com> wrote:
> From: Graff Yang <graff.yang@...il.com>
>
Generally, you need to change the title to '[PATCH] [net/irda]: new
Blackfin on-chip SIR IrDA driver (v2)" and add some change log here.
Because people don't want to review the whole code again and they just
want to know you updated something according to the LKML discussion.
v1-v2:
- item1
- item2
Something like this. Hope this is helpful, -:))
-Bryan
> Signed-off-by: Graff Yang <graff.yang@...il.com>
> ---
> drivers/net/irda/Kconfig | 45 +++
> drivers/net/irda/Makefile | 1 +
> drivers/net/irda/bfin_sir.c | 814 +++++++++++++++++++++++++++++++++++++++++++
> drivers/net/irda/bfin_sir.h | 147 ++++++++
> 4 files changed, 1007 insertions(+), 0 deletions(-)
> create mode 100644 drivers/net/irda/bfin_sir.c
> create mode 100644 drivers/net/irda/bfin_sir.h
>
> diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
> index e631755..985fec9 100644
> --- a/drivers/net/irda/Kconfig
> +++ b/drivers/net/irda/Kconfig
> @@ -17,6 +17,51 @@ config IRTTY_SIR
>
> If unsure, say Y.
>
> +config BFIN_SIR
> + tristate "Blackfin SIR on UART"
> + depends on BLACKFIN && IRDA
> + default n
> + help
> + Say Y here if your want to enable SIR function on Blackfin UART
> + devices.
> +
> + To activate this driver you can start irattach like:
> + "irattach irda0 -s"
> +
> + Saying M, it will be built as a module named bfin_sir.
> +
> + Note that you need to turn off one of the serial drivers for SIR
> + to use that UART.
> +
> +config BFIN_SIR0
> + bool "Blackfin SIR on UART0"
> + depends on BFIN_SIR && !SERIAL_BFIN_UART0
> +
> +config BFIN_SIR1
> + bool "Blackfin SIR on UART1"
> + depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
> +
> +config BFIN_SIR2
> + bool "Blackfin SIR on UART2"
> + depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
> +
> +config BFIN_SIR3
> + bool "Blackfin SIR on UART3"
> + depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
> +
> +choice
> + prompt "SIR Mode"
> + depends on BFIN_SIR
> + default SIR_BFIN_DMA
> +
> +config SIR_BFIN_DMA
> + bool "DMA mode"
> + depends on !DMA_UNCACHED_NONE
> +
> +config SIR_BFIN_PIO
> + bool "PIO mode"
> +endchoice
> +
> comment "Dongle support"
>
> config DONGLE
> diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
> index 5d20fde..d82e1e3 100644
> --- a/drivers/net/irda/Makefile
> +++ b/drivers/net/irda/Makefile
> @@ -21,6 +21,7 @@ obj-$(CONFIG_MCS_FIR) += mcs7780.o
> obj-$(CONFIG_AU1000_FIR) += au1k_ir.o
> # SIR drivers
> obj-$(CONFIG_IRTTY_SIR) += irtty-sir.o sir-dev.o
> +obj-$(CONFIG_BFIN_SIR) += bfin_sir.o
> # dongle drivers for SIR drivers
> obj-$(CONFIG_ESI_DONGLE) += esi-sir.o
> obj-$(CONFIG_TEKRAM_DONGLE) += tekram-sir.o
> diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c
> new file mode 100644
> index 0000000..38584cc
> --- /dev/null
> +++ b/drivers/net/irda/bfin_sir.c
> @@ -0,0 +1,814 @@
> +/*
> + * Blackfin Infra-red Driver
> + *
> + * Copyright 2006-2009 Analog Devices Inc.
> + *
> + * Enter bugs at http://blackfin.uclinux.org/
> + *
> + * Licensed under the GPL-2 or later.
> + *
> + */
> +#include "bfin_sir.h"
> +
> +#ifdef CONFIG_SIR_BFIN_DMA
> +#define DMA_SIR_RX_XCNT 10
> +#define DMA_SIR_RX_YCNT (PAGE_SIZE / DMA_SIR_RX_XCNT)
> +#define DMA_SIR_RX_FLUSH_JIFS (HZ * 4 / 250)
> +#endif
> +
> +#if ANOMALY_05000447
> +static int max_rate = 57600;
> +#else
> +static int max_rate = 115200;
> +#endif
> +
> +static void turnaround_delay(unsigned long last_jif, int mtt)
> +{
> + long ticks;
> +
> + mtt = mtt < 10000 ? 10000 : mtt;
> + ticks = 1 + mtt / (USEC_PER_SEC / HZ);
> + schedule_timeout_uninterruptible(ticks);
> +}
> +
> +static void __devinit bfin_sir_init_ports(struct bfin_sir_port *sp, struct platform_device *pdev)
> +{
> + int i;
> + struct resource *res;
> +
> + for (i = 0; i < pdev->num_resources; i++) {
> + res = &pdev->resource[i];
> + switch (res->flags) {
> + case IORESOURCE_MEM:
> + sp->membase = (void __iomem *)res->start;
> + break;
> + case IORESOURCE_IRQ:
> + sp->irq = res->start;
> + break;
> + case IORESOURCE_DMA:
> + sp->rx_dma_channel = res->start;
> + sp->tx_dma_channel = res->end;
> + break;
> + default:
> + break;
> + }
> + }
> +
> + sp->clk = get_sclk();
> +#ifdef CONFIG_SIR_BFIN_DMA
> + sp->tx_done = 1;
> + init_timer(&(sp->rx_dma_timer));
> +#endif
> +}
> +
> +static void bfin_sir_stop_tx(struct bfin_sir_port *port)
> +{
> +#ifdef CONFIG_SIR_BFIN_DMA
> + disable_dma(port->tx_dma_channel);
> +#endif
> +
> + while (!(SIR_UART_GET_LSR(port) & THRE)) {
> + cpu_relax();
> + continue;
> + }
> +
> + SIR_UART_STOP_TX(port);
> +}
> +
> +static void bfin_sir_enable_tx(struct bfin_sir_port *port)
> +{
> + SIR_UART_ENABLE_TX(port);
> +}
> +
> +static void bfin_sir_stop_rx(struct bfin_sir_port *port)
> +{
> + SIR_UART_STOP_RX(port);
> +}
> +
> +static void bfin_sir_enable_rx(struct bfin_sir_port *port)
> +{
> + SIR_UART_ENABLE_RX(port);
> +}
> +
> +static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
> +{
> + int ret = -EINVAL;
> + unsigned int quot;
> + unsigned short val, lsr, lcr;
> + static int utime;
> + int count = 10;
> +
> + lcr = WLS(8);
> +
> + switch (speed) {
> + case 9600:
> + case 19200:
> + case 38400:
> + case 57600:
> + case 115200:
> +
> + quot = (port->clk + (8 * speed)) / (16 * speed)\
> + - ANOMALY_05000230;
> +
> + do {
> + udelay(utime);
> + lsr = SIR_UART_GET_LSR(port);
> + } while (!(lsr & TEMT) && count--);
> +
> + /* The useconds for 1 bits to transmit */
> + utime = 1000000 / speed + 1;
> +
> + /* Clear UCEN bit to reset the UART state machine
> + * and control registers
> + */
> + val = SIR_UART_GET_GCTL(port);
> + val &= ~UCEN;
> + SIR_UART_PUT_GCTL(port, val);
> +
> + /* Set DLAB in LCR to Access THR RBR IER */
> + SIR_UART_SET_DLAB(port);
> + SSYNC();
> +
> + SIR_UART_PUT_DLL(port, quot & 0xFF);
> + SIR_UART_PUT_DLH(port, (quot >> 8) & 0xFF);
> + SSYNC();
> +
> + /* Clear DLAB in LCR */
> + SIR_UART_CLEAR_DLAB(port);
> + SSYNC();
> +
> + SIR_UART_PUT_LCR(port, lcr);
> +
> + val = SIR_UART_GET_GCTL(port);
> + val |= UCEN;
> + SIR_UART_PUT_GCTL(port, val);
> +
> + ret = 0;
> + break;
> + default:
> + printk(KERN_WARNING "bfin_sir: Invalid speed %d\n", speed);
> + break;
> + }
> +
> + val = SIR_UART_GET_GCTL(port);
> + /* If not add the 'RPOLC', we can't catch the receive interrupt.
> + * It's related with the HW layout and the IR transiver.
> + */
> + val |= IREN | RPOLC;
> + SIR_UART_PUT_GCTL(port, val);
> + return ret;
> +}
> +
> +static int bfin_sir_is_receiving(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> +
> + if (!(SIR_UART_GET_IER(port) & ERBFI))
> + return 0;
> + return self->rx_buff.state != OUTSIDE_FRAME;
> +}
> +
> +#ifdef CONFIG_SIR_BFIN_PIO
> +static void bfin_sir_tx_chars(struct net_device *dev)
> +{
> + unsigned int chr;
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> +
> + if (self->tx_buff.len != 0) {
> + chr = *(self->tx_buff.data);
> + SIR_UART_PUT_CHAR(port, chr);
> + self->tx_buff.data++;
> + self->tx_buff.len--;
> + } else {
> + self->stats.tx_packets++;
> + self->stats.tx_bytes += self->tx_buff.data - self->tx_buff.head;
> + if (self->newspeed) {
> + bfin_sir_set_speed(port, self->newspeed);
> + self->speed = self->newspeed;
> + self->newspeed = 0;
> + }
> + bfin_sir_stop_tx(port);
> + bfin_sir_enable_rx(port);
> + /* I'm hungry! */
> + netif_wake_queue(dev);
> + }
> +}
> +
> +static void bfin_sir_rx_chars(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> + unsigned char ch;
> +
> + SIR_UART_CLEAR_LSR(port);
> + ch = SIR_UART_GET_CHAR(port);
> + async_unwrap_char(dev, &self->stats, &self->rx_buff, ch);
> + dev->last_rx = jiffies;
> +}
> +
> +static irqreturn_t bfin_sir_rx_int(int irq, void *dev_id)
> +{
> + struct net_device *dev = dev_id;
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> +
> + spin_lock(&self->lock);
> + while ((SIR_UART_GET_LSR(port) & DR))
> + bfin_sir_rx_chars(dev);
> + spin_unlock(&self->lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t bfin_sir_tx_int(int irq, void *dev_id)
> +{
> + struct net_device *dev = dev_id;
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> +
> + spin_lock(&self->lock);
> + if (SIR_UART_GET_LSR(port) & THRE)
> + bfin_sir_tx_chars(dev);
> + spin_unlock(&self->lock);
> +
> + return IRQ_HANDLED;
> +}
> +#endif /* CONFIG_SIR_BFIN_PIO */
> +
> +#ifdef CONFIG_SIR_BFIN_DMA
> +static void bfin_sir_dma_tx_chars(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> +
> + if (!port->tx_done)
> + return;
> + port->tx_done = 0;
> +
> + if (self->tx_buff.len == 0) {
> + self->stats.tx_packets++;
> + if (self->newspeed) {
> + bfin_sir_set_speed(port, self->newspeed);
> + self->speed = self->newspeed;
> + self->newspeed = 0;
> + }
> + bfin_sir_enable_rx(port);
> + port->tx_done = 1;
> + netif_wake_queue(dev);
> + return;
> + }
> +
> + blackfin_dcache_flush_range((unsigned long)(self->tx_buff.data),
> + (unsigned long)(self->tx_buff.data+self->tx_buff.len));
> + set_dma_config(port->tx_dma_channel,
> + set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
> + INTR_ON_BUF, DIMENSION_LINEAR, DATA_SIZE_8,
> + DMA_SYNC_RESTART));
> + set_dma_start_addr(port->tx_dma_channel,
> + (unsigned long)(self->tx_buff.data));
> + set_dma_x_count(port->tx_dma_channel, self->tx_buff.len);
> + set_dma_x_modify(port->tx_dma_channel, 1);
> + enable_dma(port->tx_dma_channel);
> +}
> +
> +static irqreturn_t bfin_sir_dma_tx_int(int irq, void *dev_id)
> +{
> + struct net_device *dev = dev_id;
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> +
> + spin_lock(&self->lock);
> + if (!(get_dma_curr_irqstat(port->tx_dma_channel) & DMA_RUN)) {
> + clear_dma_irqstat(port->tx_dma_channel);
> + bfin_sir_stop_tx(port);
> +
> + self->stats.tx_packets++;
> + self->stats.tx_bytes += self->tx_buff.len;
> + self->tx_buff.len = 0;
> + if (self->newspeed) {
> + bfin_sir_set_speed(port, self->newspeed);
> + self->speed = self->newspeed;
> + self->newspeed = 0;
> + }
> + bfin_sir_enable_rx(port);
> + /* I'm hungry! */
> + netif_wake_queue(dev);
> + port->tx_done = 1;
> + }
> + spin_unlock(&self->lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void bfin_sir_dma_rx_chars(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> + int i;
> +
> + SIR_UART_CLEAR_LSR(port);
> +
> + for (i = port->rx_dma_buf.head; i < port->rx_dma_buf.tail; i++)
> + async_unwrap_char(dev, &self->stats, &self->rx_buff, port->rx_dma_buf.buf[i]);
> +}
> +
> +void bfin_sir_rx_dma_timeout(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> + int x_pos, pos;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&self->lock, flags);
> + x_pos = DMA_SIR_RX_XCNT - get_dma_curr_xcount(port->rx_dma_channel);
> + if (x_pos == DMA_SIR_RX_XCNT)
> + x_pos = 0;
> +
> + pos = port->rx_dma_nrows * DMA_SIR_RX_XCNT + x_pos;
> +
> + if (pos > port->rx_dma_buf.tail) {
> + port->rx_dma_buf.tail = pos;
> + bfin_sir_dma_rx_chars(dev);
> + port->rx_dma_buf.head = port->rx_dma_buf.tail;
> + }
> + spin_unlock_irqrestore(&self->lock, flags);
> +}
> +
> +static irqreturn_t bfin_sir_dma_rx_int(int irq, void *dev_id)
> +{
> + struct net_device *dev = dev_id;
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> + unsigned short irqstat;
> +
> + spin_lock(&self->lock);
> +
> + port->rx_dma_nrows++;
> + port->rx_dma_buf.tail = DMA_SIR_RX_XCNT * port->rx_dma_nrows;
> + bfin_sir_dma_rx_chars(dev);
> + if (port->rx_dma_nrows >= DMA_SIR_RX_YCNT) {
> + port->rx_dma_nrows = 0;
> + port->rx_dma_buf.tail = 0;
> + }
> + port->rx_dma_buf.head = port->rx_dma_buf.tail;
> +
> + irqstat = get_dma_curr_irqstat(port->rx_dma_channel);
> + clear_dma_irqstat(port->rx_dma_channel);
> + spin_unlock(&self->lock);
> +
> + mod_timer(&port->rx_dma_timer, jiffies + DMA_SIR_RX_FLUSH_JIFS);
> + return IRQ_HANDLED;
> +}
> +#endif /* CONFIG_SIR_BFIN_DMA */
> +
> +static int bfin_sir_startup(struct bfin_sir_port *port, struct net_device *dev)
> +{
> +#ifdef CONFIG_SIR_BFIN_DMA
> + dma_addr_t dma_handle;
> +#endif /* CONFIG_SIR_BFIN_DMA */
> +
> + if (request_dma(port->rx_dma_channel, "BFIN_UART_RX") < 0) {
> + dev_warn(&dev->dev, "Unable to attach SIR RX DMA channel\n");
> + return -EBUSY;
> + }
> +
> + if (request_dma(port->tx_dma_channel, "BFIN_UART_TX") < 0) {
> + dev_warn(&dev->dev, "Unable to attach SIR TX DMA channel\n");
> + free_dma(port->rx_dma_channel);
> + return -EBUSY;
> + }
> +
> +#ifdef CONFIG_SIR_BFIN_DMA
> +
> + set_dma_callback(port->rx_dma_channel, bfin_sir_dma_rx_int, dev);
> + set_dma_callback(port->tx_dma_channel, bfin_sir_dma_tx_int, dev);
> +
> + port->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA);
> + port->rx_dma_buf.head = 0;
> + port->rx_dma_buf.tail = 0;
> + port->rx_dma_nrows = 0;
> +
> + set_dma_config(port->rx_dma_channel,
> + set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
> + INTR_ON_ROW, DIMENSION_2D,
> + DATA_SIZE_8, DMA_SYNC_RESTART));
> + set_dma_x_count(port->rx_dma_channel, DMA_SIR_RX_XCNT);
> + set_dma_x_modify(port->rx_dma_channel, 1);
> + set_dma_y_count(port->rx_dma_channel, DMA_SIR_RX_YCNT);
> + set_dma_y_modify(port->rx_dma_channel, 1);
> + set_dma_start_addr(port->rx_dma_channel, (unsigned long)port->rx_dma_buf.buf);
> + enable_dma(port->rx_dma_channel);
> +
> + port->rx_dma_timer.data = (unsigned long)(dev);
> + port->rx_dma_timer.function = (void *)bfin_sir_rx_dma_timeout;
> +
> +#else
> +
> + if (request_irq(port->irq, bfin_sir_rx_int, IRQF_DISABLED, "BFIN_SIR_RX", dev)) {
> + dev_warn(&dev->dev, "Unable to attach SIR RX interrupt\n");
> + return -EBUSY;
> + }
> +
> + if (request_irq(port->irq+1, bfin_sir_tx_int, IRQF_DISABLED, "BFIN_SIR_TX", dev)) {
> + dev_warn(&dev->dev, "Unable to attach SIR TX interrupt\n");
> + free_irq(port->irq, dev);
> + return -EBUSY;
> + }
> +#endif
> +
> + return 0;
> +}
> +
> +static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev)
> +{
> + unsigned short val;
> +
> + bfin_sir_stop_rx(port);
> + SIR_UART_DISABLE_INTS(port);
> +
> + val = SIR_UART_GET_GCTL(port);
> + val &= ~(UCEN | IREN | RPOLC);
> + SIR_UART_PUT_GCTL(port, val);
> +
> +#ifdef CONFIG_SIR_BFIN_DMA
> + disable_dma(port->tx_dma_channel);
> + disable_dma(port->rx_dma_channel);
> + del_timer(&(port->rx_dma_timer));
> + dma_free_coherent(NULL, PAGE_SIZE, port->rx_dma_buf.buf, 0);
> +#else
> + free_irq(port->irq+1, dev);
> + free_irq(port->irq, dev);
> +#endif
> + free_dma(port->tx_dma_channel);
> + free_dma(port->rx_dma_channel);
> +}
> +
> +#ifdef CONFIG_PM
> +static int bfin_sir_suspend(struct platform_device *pdev, pm_message_t state)
> +{
> + struct bfin_sir_port *sir_port;
> + struct net_device *dev;
> + struct bfin_sir_self *self;
> +
> + sir_port = platform_get_drvdata(pdev);
> + if (!sir_port)
> + return 0;
> +
> + dev = sir_port->dev;
> + self = netdev_priv(dev);
> + if (self->open) {
> + flush_work(&self->work);
> + bfin_sir_shutdown(self->sir_port, dev);
> + netif_device_detach(dev);
> + }
> +
> + return 0;
> +}
> +static int bfin_sir_resume(struct platform_device *pdev)
> +{
> + struct bfin_sir_port *sir_port;
> + struct net_device *dev;
> + struct bfin_sir_self *self;
> + struct bfin_sir_port *port;
> +
> + sir_port = platform_get_drvdata(pdev);
> + if (!sir_port)
> + return 0;
> +
> + dev = sir_port->dev;
> + self = netdev_priv(dev);
> + port = self->sir_port;
> + if (self->open) {
> + if (self->newspeed) {
> + self->speed = self->newspeed;
> + self->newspeed = 0;
> + }
> + bfin_sir_startup(port, dev);
> + bfin_sir_set_speed(port, 9600);
> + bfin_sir_enable_rx(port);
> + netif_device_attach(dev);
> + }
> + return 0;
> +}
> +#else
> +#define bfin_sir_suspend NULL
> +#define bfin_sir_resume NULL
> +#endif
> +
> +static void bfin_sir_send_work(struct work_struct *work)
> +{
> + struct bfin_sir_self *self = container_of(work, struct bfin_sir_self, work);
> + struct net_device *dev = self->sir_port->dev;
> + struct bfin_sir_port *port = self->sir_port;
> + unsigned short val;
> + int tx_cnt = 10;
> +
> + while (bfin_sir_is_receiving(dev) && --tx_cnt)
> + turnaround_delay(dev->last_rx, self->mtt);
> +
> + bfin_sir_stop_rx(port);
> +
> + /* To avoid losting RX interrupt, we reset IR function before
> + * sending data. We also can set the speed, which will
> + * reset all the UART.
> + */
> + val = SIR_UART_GET_GCTL(port);
> + val &= ~(IREN | RPOLC);
> + SIR_UART_PUT_GCTL(port, val);
> + SSYNC();
> + val |= IREN | RPOLC;
> + SIR_UART_PUT_GCTL(port, val);
> + SSYNC();
> + /* bfin_sir_set_speed(port, self->speed); */
> +
> +#ifdef CONFIG_SIR_BFIN_DMA
> + bfin_sir_dma_tx_chars(dev);
> +#endif
> + bfin_sir_enable_tx(port);
> + dev->trans_start = jiffies;
> +}
> +
> +static int bfin_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + int speed = irda_get_next_speed(skb);
> +
> + netif_stop_queue(dev);
> +
> + self->mtt = irda_get_mtt(skb);
> +
> + if (speed != self->speed && speed != -1)
> + self->newspeed = speed;
> +
> + self->tx_buff.data = self->tx_buff.head;
> + if (skb->len == 0)
> + self->tx_buff.len = 0;
> + else
> + self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, self->tx_buff.truesize);
> +
> + schedule_work(&self->work);
> + dev_kfree_skb(skb);
> +
> + return 0;
> +}
> +
> +static int bfin_sir_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
> +{
> + struct if_irda_req *rq = (struct if_irda_req *)ifreq;
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> + int ret = 0;
> +
> + switch (cmd) {
> + case SIOCSBANDWIDTH:
> + if (capable(CAP_NET_ADMIN)) {
> + if (self->open) {
> + ret = bfin_sir_set_speed(port, rq->ifr_baudrate);
> + bfin_sir_enable_rx(port);
> + } else {
> + dev_warn(&dev->dev, "SIOCSBANDWIDTH: !netif_running\n");
> + ret = 0;
> + }
> + }
> + break;
> +
> + case SIOCSMEDIABUSY:
> + ret = -EPERM;
> + if (capable(CAP_NET_ADMIN)) {
> + irda_device_set_media_busy(dev, TRUE);
> + ret = 0;
> + }
> + break;
> +
> + case SIOCGRECEIVING:
> + rq->ifr_receiving = bfin_sir_is_receiving(dev);
> + break;
> +
> + default:
> + ret = -EOPNOTSUPP;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static struct net_device_stats *bfin_sir_stats(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> +
> + return &self->stats;
> +}
> +
> +static int bfin_sir_open(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> + int err = -ENOMEM;
> +
> + self->newspeed = 0;
> + self->speed = 9600;
> +
> + spin_lock_init(&self->lock);
> +
> + err = bfin_sir_startup(port, dev);
> + if (err)
> + goto err_startup;
> +
> + bfin_sir_set_speed(port, 9600);
> +
> + self->irlap = irlap_open(dev, &self->qos, DRIVER_NAME);
> + if (!self->irlap)
> + goto err_irlap;
> +
> + INIT_WORK(&self->work, bfin_sir_send_work);
> +
> + /*
> + * Now enable the interrupt then start the queue
> + */
> + self->open = 1;
> + bfin_sir_enable_rx(port);
> +
> + netif_start_queue(dev);
> +
> + return 0;
> +
> +err_irlap:
> + self->open = 0;
> + bfin_sir_shutdown(port, dev);
> +err_startup:
> + return err;
> +}
> +
> +static int bfin_sir_stop(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> +
> + flush_work(&self->work);
> + bfin_sir_shutdown(self->sir_port, dev);
> +
> + if (self->rxskb) {
> + dev_kfree_skb(self->rxskb);
> + self->rxskb = NULL;
> + }
> +
> + /* Stop IrLAP */
> + if (self->irlap) {
> + irlap_close(self->irlap);
> + self->irlap = NULL;
> + }
> +
> + netif_stop_queue(dev);
> + self->open = 0;
> +
> + return 0;
> +}
> +
> +static int bfin_sir_init_iobuf(iobuff_t *io, int size)
> +{
> + io->head = kmalloc(size, GFP_KERNEL);
> + if (!io->head)
> + return -ENOMEM;
> + io->truesize = size;
> + io->in_frame = FALSE;
> + io->state = OUTSIDE_FRAME;
> + io->data = io->head;
> + return 0;
> +}
> +
> +static int __devinit bfin_sir_probe(struct platform_device *pdev)
> +{
> + struct net_device *dev;
> + struct bfin_sir_self *self;
> + unsigned int baudrate_mask;
> + struct bfin_sir_port *sir_port;
> + int err;
> +
> + err = peripheral_request_list(per[pdev->id], DRIVER_NAME);
> + if (err)
> + return err;
> +
> + err = -ENOMEM;
> + sir_port = kmalloc(sizeof(*sir_port), GFP_KERNEL);
> + if (!sir_port)
> + goto err_mem_0;
> +
> + bfin_sir_init_ports(sir_port, pdev);
> +
> + dev = alloc_irdadev(sizeof(*self));
> + if (!dev)
> + goto err_mem_1;
> +
> + self = netdev_priv(dev);
> + self->dev = &pdev->dev;
> + self->sir_port = sir_port;
> + sir_port->dev = dev;
> +
> + err = bfin_sir_init_iobuf(&self->rx_buff, IRDA_SKB_MAX_MTU);
> + if (err)
> + goto err_mem_2;
> + err = bfin_sir_init_iobuf(&self->tx_buff, IRDA_SIR_MAX_FRAME);
> + if (err)
> + goto err_mem_3;
> +
> + dev->hard_start_xmit = bfin_sir_hard_xmit;
> + dev->open = bfin_sir_open;
> + dev->stop = bfin_sir_stop;
> + dev->do_ioctl = bfin_sir_ioctl;
> + dev->get_stats = bfin_sir_stats;
> + dev->irq = sir_port->irq;
> +
> + irda_init_max_qos_capabilies(&self->qos);
> +
> + baudrate_mask = IR_9600;
> +
> + switch (max_rate) {
> + case 115200:
> + baudrate_mask |= IR_115200;
> + case 57600:
> + baudrate_mask |= IR_57600;
> + case 38400:
> + baudrate_mask |= IR_38400;
> + case 19200:
> + baudrate_mask |= IR_19200;
> + case 9600:
> + break;
> + default:
> + printk(KERN_WARNING "bfin_sir: Invalid maximum baud rate, using 9600\n");
> + }
> +
> + self->qos.baud_rate.bits &= baudrate_mask;
> +
> + self->qos.min_turn_time.bits = 1; /* 10 ms or more */
> +
> + irda_qos_bits_to_value(&self->qos);
> +
> + err = register_netdev(dev);
> +
> + if (err) {
> + kfree(self->tx_buff.head);
> +err_mem_3:
> + kfree(self->rx_buff.head);
> +err_mem_2:
> + free_netdev(dev);
> +err_mem_1:
> + kfree(sir_port);
> +err_mem_0:
> + peripheral_free_list(per[pdev->id]);
> + } else
> + platform_set_drvdata(pdev, sir_port);
> +
> + return err;
> +}
> +
> +static int __devexit bfin_sir_remove(struct platform_device *pdev)
> +{
> + struct bfin_sir_port *sir_port;
> + struct net_device *dev = NULL;
> + struct bfin_sir_self *self;
> +
> + sir_port = platform_get_drvdata(pdev);
> + if (!sir_port)
> + return 0;
> + dev = sir_port->dev;
> + self = netdev_priv(dev);
> + unregister_netdev(dev);
> + kfree(self->tx_buff.head);
> + kfree(self->rx_buff.head);
> + free_netdev(dev);
> + kfree(sir_port);
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static struct platform_driver bfin_ir_driver = {
> + .probe = bfin_sir_probe,
> + .remove = __devexit_p(bfin_sir_remove),
> + .suspend = bfin_sir_suspend,
> + .resume = bfin_sir_resume,
> + .driver = {
> + .name = DRIVER_NAME,
> + },
> +};
> +
> +static int __init bfin_sir_init(void)
> +{
> + return platform_driver_register(&bfin_ir_driver);
> +}
> +
> +static void __exit bfin_sir_exit(void)
> +{
> + platform_driver_unregister(&bfin_ir_driver);
> +}
> +
> +module_init(bfin_sir_init);
> +module_exit(bfin_sir_exit);
> +
> +module_param(max_rate, int, 0);
> +MODULE_PARM_DESC(max_rate, "Maximum baud rate (115200, 57600, 38400, 19200, 9600)");
> +
> +MODULE_AUTHOR("Graf Yang <graf.yang@...log.com>");
> +MODULE_DESCRIPTION("Blackfin IrDA driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/net/irda/bfin_sir.h b/drivers/net/irda/bfin_sir.h
> new file mode 100644
> index 0000000..a723257
> --- /dev/null
> +++ b/drivers/net/irda/bfin_sir.h
> @@ -0,0 +1,147 @@
> +/*
> + * Blackfin Infra-red Driver
> + *
> + * Copyright 2006-2009 Analog Devices Inc.
> + *
> + * Enter bugs at http://blackfin.uclinux.org/
> + *
> + * Licensed under the GPL-2 or later.
> + *
> + */
> +
> +#include <linux/serial.h>
> +#include <linux/module.h>
> +#include <linux/netdevice.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +#include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
> +
> +#include <net/irda/irda.h>
> +#include <net/irda/wrapper.h>
> +#include <net/irda/irda_device.h>
> +
> +#include <asm/irq.h>
> +#include <asm/cacheflush.h>
> +#include <asm/dma.h>
> +#include <asm/portmux.h>
> +
> +#ifdef CONFIG_SIR_BFIN_DMA
> +struct dma_rx_buf {
> + char *buf;
> + int head;
> + int tail;
> +};
> +#endif
> +
> +struct bfin_sir_port {
> + unsigned char __iomem *membase;
> + unsigned int irq;
> + unsigned int lsr;
> + unsigned long clk;
> + struct net_device *dev;
> +#ifdef CONFIG_SIR_BFIN_DMA
> + int tx_done;
> + struct dma_rx_buf rx_dma_buf;
> + struct timer_list rx_dma_timer;
> + int rx_dma_nrows;
> +#endif
> + unsigned int tx_dma_channel;
> + unsigned int rx_dma_channel;
> +};
> +
> +struct bfin_sir_port_res {
> + unsigned long base_addr;
> + int irq;
> + unsigned int rx_dma_channel;
> + unsigned int tx_dma_channel;
> +};
> +
> +struct bfin_sir_self {
> + struct bfin_sir_port *sir_port;
> + spinlock_t lock;
> + unsigned int open;
> + int speed;
> + int newspeed;
> +
> + struct sk_buff *txskb;
> + struct sk_buff *rxskb;
> + struct net_device_stats stats;
> + struct device *dev;
> + struct irlap_cb *irlap;
> + struct qos_info qos;
> +
> + iobuff_t tx_buff;
> + iobuff_t rx_buff;
> +
> + struct work_struct work;
> + int mtt;
> +};
> +
> +#define DRIVER_NAME "bfin_sir"
> +
> +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR)
> +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL)
> +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH)
> +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR)
> +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL)
> +
> +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
> +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v)
> +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v)
> +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v)
> +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
> +
> +#ifdef CONFIG_BF54x
> +#define SIR_UART_GET_LSR(port) bfin_read16((port)->membase + OFFSET_LSR)
> +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER_SET)
> +#define SIR_UART_SET_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_SET), v)
> +#define SIR_UART_CLEAR_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v)
> +#define SIR_UART_PUT_LSR(port, v) bfin_write16(((port)->membase + OFFSET_LSR), v)
> +#define SIR_UART_CLEAR_LSR(port) bfin_write16(((port)->membase + OFFSET_LSR), -1)
> +
> +#define SIR_UART_SET_DLAB(port)
> +#define SIR_UART_CLEAR_DLAB(port)
> +
> +#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_SET_IER(port, v)
> +#define SIR_UART_DISABLE_INTS(port) SIR_UART_CLEAR_IER(port, 0xF)
> +#define SIR_UART_STOP_TX(port) do { SIR_UART_PUT_LSR(port, TFI); SIR_UART_CLEAR_IER(port, ETBEI); } while (0)
> +#define SIR_UART_ENABLE_TX(port) do { SIR_UART_SET_IER(port, ETBEI); } while (0)
> +#define SIR_UART_STOP_RX(port) do { SIR_UART_CLEAR_IER(port, ERBFI); } while (0)
> +#define SIR_UART_ENABLE_RX(port) do { SIR_UART_SET_IER(port, ERBFI); } while (0)
> +#else
> +
> +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR)
> +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER)
> +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v)
> +
> +#define SIR_UART_SET_DLAB(port) do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) | DLAB); } while (0)
> +#define SIR_UART_CLEAR_DLAB(port) do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) & ~DLAB); } while (0)
> +
> +#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_PUT_IER(port, v)
> +#define SIR_UART_DISABLE_INTS(port) SIR_UART_PUT_IER(port, 0)
> +#define SIR_UART_STOP_TX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ETBEI); } while (0)
> +#define SIR_UART_ENABLE_TX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ETBEI); } while (0)
> +#define SIR_UART_STOP_RX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ERBFI); } while (0)
> +#define SIR_UART_ENABLE_RX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ERBFI); } while (0)
> +
> +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
> +{
> + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
> + port->lsr |= (lsr & (BI|FE|PE|OE));
> + return lsr | port->lsr;
> +}
> +
> +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
> +{
> + port->lsr = 0;
> + bfin_read16(port->membase + OFFSET_LSR);
> +}
> +#endif
> +
> +static const unsigned short per[][3] = {
> + {P_UART0_RX, P_UART0_TX, 0},
> + {P_UART1_RX, P_UART1_TX, 0},
> + {P_UART2_RX, P_UART2_TX, 0},
> + {P_UART3_RX, P_UART3_TX, 0},
> +};
> --
> 1.6.1
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists