linux-kernel - [PATCH 7/11] PCI PM: Use pci_set_power

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <200903141231.20024.rjw@sisk.pl>
Date:	Sat, 14 Mar 2009 12:31:18 +0100
From:	"Rafael J. Wysocki" <rjw@...k.pl>
To:	pm list <linux-pm@...ts.linux-foundation.org>
Cc:	LKML <linux-kernel@...r.kernel.org>,
	Linus Torvalds <torvalds@...ux-foundation.org>,
	Ingo Molnar <mingo@...e.hu>,
	"Eric W. Biederman" <ebiederm@...ssion.com>,
	Benjamin Herrenschmidt <benh@...nel.crashing.org>,
	Jeremy Fitzhardinge <jeremy@...p.org>,
	Len Brown <lenb@...nel.org>,
	Jesse Barnes <jbarnes@...tuousgeek.org>,
	Thomas Gleixner <tglx@...utronix.de>,
	Arve Hjønnevåg <arve@...roid.com>,
	Linux PCI <linux-pci@...r.kernel.org>
Subject: [PATCH 7/11] PCI PM: Use pci_set_power_state during early resume

From: Rafael J. Wysocki <rjw@...k.pl>

Once we have allowed timer interrupts to be enabled during the early
phase of resuming devices, we are now able to use the generic
pci_set_power_state() to put PCI devices into D0 at that time.  Then,
the platform-specific PM code will have a chance to handle devices
that don't implement the native PCI PM or that require some
additional, platform-specific operations to be carried out to power
them up.  Also, by doing this we can simplify the code quite a bit.

Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
---
 drivers/pci/pci.c |   48 +++++++++---------------------------------------
 1 file changed, 9 insertions(+), 39 deletions(-)

Index: linux-2.6/drivers/pci/pci.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci.c
+++ linux-2.6/drivers/pci/pci.c
@@ -426,7 +426,6 @@ static inline int platform_pci_sleep_wak
  *                           given PCI device
  * @dev: PCI device to handle.
  * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
- * @wait: If 'true', wait for the device to change its power state
  *
  * RETURN VALUE:
  * -EINVAL if the requested state is invalid.
@@ -435,8 +434,7 @@ static inline int platform_pci_sleep_wak
  * 0 if device already is in the requested state.
  * 0 if device's power state has been successfully changed.
  */
-static int
-pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
+static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 {
 	u16 pmcsr;
 	bool need_restore = false;
@@ -481,10 +479,8 @@ pci_raw_set_power_state(struct pci_dev *
 		break;
 	case PCI_UNKNOWN: /* Boot-up */
 		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
-		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) {
+		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
 			need_restore = true;
-			wait = true;
-		}
 		/* Fall-through: force to D0 */
 	default:
 		pmcsr = 0;
@@ -494,9 +490,6 @@ pci_raw_set_power_state(struct pci_dev *
 	/* enter specified state */
 	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
 
-	if (!wait)
-		return 0;
-
 	/* Mandatory power management transition delays */
 	/* see PCI PM 1.1 5.6.1 table 18 */
 	if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
@@ -521,7 +514,7 @@ pci_raw_set_power_state(struct pci_dev *
 	if (need_restore)
 		pci_restore_bars(dev);
 
-	if (wait && dev->bus->self)
+	if (dev->bus->self)
 		pcie_aspm_pm_state_change(dev->bus->self);
 
 	return 0;
@@ -591,7 +584,7 @@ int pci_set_power_state(struct pci_dev *
 	if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
 		return 0;
 
-	error = pci_raw_set_power_state(dev, state, true);
+	error = pci_raw_set_power_state(dev, state);
 
 	if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
 		/* Allow the platform to finalize the transition */
@@ -1390,37 +1383,14 @@ void pci_allocate_cap_save_buffers(struc
  */
 int pci_restore_standard_config(struct pci_dev *dev)
 {
-	pci_power_t prev_state;
-	int error;
-
-	pci_update_current_state(dev, PCI_D0);
-
-	prev_state = dev->current_state;
-	if (prev_state == PCI_D0)
-		goto Restore;
-
-	error = pci_raw_set_power_state(dev, PCI_D0, false);
-	if (error)
-		return error;
+	pci_update_current_state(dev, PCI_UNKNOWN);
 
-	/*
-	 * This assumes that we won't get a bus in B2 or B3 from the BIOS, but
-	 * we've made this assumption forever and it appears to be universally
-	 * satisfied.
-	 */
-	switch(prev_state) {
-	case PCI_D3cold:
-	case PCI_D3hot:
-		mdelay(pci_pm_d3_delay);
-		break;
-	case PCI_D2:
-		udelay(PCI_PM_D2_DELAY);
-		break;
+	if (dev->current_state != PCI_D0) {
+		int error = pci_set_power_state(dev, PCI_D0);
+		if (error)
+			return error;
 	}
 
-	pci_update_current_state(dev, PCI_D0);
-
- Restore:
 	return dev->state_saved ? pci_restore_state(dev) : 0;
 }
 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/