[ 0.000000] Linux version 2.6.29-rc8-tip-02702-ge0d2c41-dirty (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #20985 SMP Wed Mar 18 10:17:17 CET 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] CPU: vendor_id 'AuthenticAMD' unknown, using generic init. [ 0.000000] CPU: Your system may be unstable. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] console [earlyser0] enabled [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] get_mtrr: cpu0 reg00 base=0000000000 size=0000040000 write-back [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 10000-16000 [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f5680] f5680 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] mpc: f1400-f152c [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Warning! Not a NUMA-Q system! [ 0.000000] NUMA - single node, flat memory mode [ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3fff0 [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 [ 0.000000] node 0 pfn: [0 - 3fff0] [ 0.000000] Reserving 2560 pages of KVA for lmem_map of node 0 at 3f400 [ 0.000000] remove_active_range (0, 259072, 261632) [ 0.000000] Reserving total of a00 pages for numa KVA remap [ 0.000000] kva_start_pfn ~ 36e00 max_low_pfn ~ 379fe [ 0.000000] max_pfn = 3fff0 [ 0.000000] 133MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] max_low_pfn = 379fe, highstart_pfn = 379fe [ 0.000000] Low memory ends at vaddr f79fe000 [ 0.000000] node 0 will remap to vaddr f6e00000 - f7800000 [ 0.000000] allocate_pgdat: node 0 NODE_DATA f6e00000 [ 0.000000] remap_numa_kva: node 0 [ 0.000000] remap_numa_kva: f6e00000 to pfn 0003f400 [ 0.000000] remap_numa_kva: f7000000 to pfn 0003f600 [ 0.000000] remap_numa_kva: f7200000 to pfn 0003f800 [ 0.000000] remap_numa_kva: f7400000 to pfn 0003fa00 [ 0.000000] remap_numa_kva: f7600000 to pfn 0003fc00 [ 0.000000] High memory starts at vaddr f79fe000 [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f40 [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00018b3fb0] TEXT DATA BSS ==> [0001000000 - 00018b3fb0] [ 0.000000] #4 [00018b4000 - 00018c5000] INIT_PG_TABLE ==> [00018b4000 - 00018c5000] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [003f400000 - 003fe00000] KVA RAM [ 0.000000] #8 [0036e00000 - 0037800000] KVA PG ==> [0036e00000 - 0037800000] [ 0.000000] #9 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f5680] f5680 [ 0.000000] mpc: f1400-f152c [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f400 [ 0.000000] 0: 0x0003fe00 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 259455 [ 0.000000] free_area_init_node: node 0, pgdat f6e00000, node_mem_map f6e02200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 268 pages used for memmap [ 0.000000] HighMem zone: 31462 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] mpc: f1400-f152c [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Warning! Not a NUMA-Q system! [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Bus #0 is PCI [ 0.000000] Bus #1 is PCI [ 0.000000] Bus #2 is PCI [ 0.000000] Bus #3 is PCI [ 0.000000] Bus #4 is PCI [ 0.000000] Bus #5 is PCI [ 0.000000] Bus #6 is ISA [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05 [ 0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:16 [ 0.000000] PERCPU: Embedded 15 pages at c18ca000, static data 39612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257407 [ 0.000000] Policy zone: HighMem [ 0.000000] Kernel command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200,keep console=tty debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 [ 0.000000] debug: sysrq always enabled. [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2010.502 MHz processor. [ 0.000999] spurious 8259A interrupt: IRQ7. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000999] Initializing HighMem for node 0 (000379fe:0003fff0) [ 0.000999] Memory: 1017592k/1048512k available (4615k kernel code, 20228k reserved, 2424k data, 424k init, 126920k highmem) [ 0.000999] virtual kernel memory layout: [ 0.000999] fixmap : 0xffe17000 - 0xfffff000 (1952 kB) [ 0.000999] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000999] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000999] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000999] .init : 0xc16e9000 - 0xc1753000 ( 424 kB) [ 0.000999] .data : 0xc1481e66 - 0xc16e0144 (2424 kB) [ 0.000999] .text : 0xc1000000 - 0xc1481e66 (4615 kB) [ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=16 [ 0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4021.00 BogoMIPS (lpj=2010502) [ 0.003070] Security Framework initialized [ 0.004029] Mount-cache hash table entries: 512 [ 0.005377] Checking 'hlt' instruction... OK. [ 0.010702] Freeing SMP alternatives: 18k freed [ 0.011015] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.012004] ftrace: allocating 20460 entries in 41 pages [ 0.014133] enabled ExtINT on CPU#0 [ 0.015046] ExtINT not setup in hardware but reported by MP table [ 0.016083] Mapping cpu 0 to node 0 [ 0.016999] ENABLING IO-APIC IRQs [ 0.017999] init IO_APIC IRQs [ 0.018999] 2-0 (apicid-pin) not connected [ 0.021004] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.022003] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.023002] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1) [ 0.023996] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.023996] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1) [ 0.023996] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.023996] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.023996] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.023996] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0) [ 0.023996] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.023996] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1) [ 0.023996] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.023996] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.023996] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.023996] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.023996] 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected [ 0.023996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.023996] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.023996] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.023996] ..... (found apic 0 pin 0) ... [ 0.034522] ....... works. [ 0.034995] CPU0: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.038995] Using local APIC timer interrupts. [ 0.038996] calibrating APIC timer ... [ 0.040993] ... lapic delta = 1256243 [ 0.040993] ..... delta 1256243 [ 0.040993] ..... mult: 53963428 [ 0.040993] ..... calibration result: 200998 [ 0.040993] ..... CPU clock speed is 2009.0989 MHz. [ 0.040993] ..... host bus clock speed is 200.0998 MHz. [ 0.040993] ... verify APIC timer [ 0.143454] ... jiffies delta = 100 [ 0.143979] ... jiffies result ok [ 0.144997] calling migration_init+0x0/0x4b @ 1 [ 0.146013] initcall migration_init+0x0/0x4b returned 1 after 0 usecs [ 0.146981] initcall migration_init+0x0/0x4b returned with error code 1 [ 0.147980] calling spawn_ksoftirqd+0x0/0x47 @ 1 [ 0.149004] initcall spawn_ksoftirqd+0x0/0x47 returned 0 after 0 usecs [ 0.149981] calling init_call_single_data+0x0/0x53 @ 1 [ 0.150980] initcall init_call_single_data+0x0/0x53 returned 0 after 0 usecs [ 0.151979] calling relay_init+0x0/0x7 @ 1 [ 0.152979] initcall relay_init+0x0/0x7 returned 0 after 0 usecs [ 0.153979] calling tracer_alloc_buffers+0x0/0x198 @ 1 [ 0.155079] Testing tracer nop: PASSED [ 0.156981] initcall tracer_alloc_buffers+0x0/0x198 returned 0 after 1952 usecs [ 0.157978] calling init_trace_printk+0x0/0xf @ 1 [ 0.158979] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs [ 0.159978] calling trace_workqueue_early_init+0x0/0xe1 @ 1 [ 0.161009] initcall trace_workqueue_early_init+0x0/0xe1 returned 0 after 0 usecs [ 0.161978] calling perf_counter_init+0x0/0x27 @ 1 [ 0.162979] initcall perf_counter_init+0x0/0x27 returned 0 after 0 usecs [ 0.164070] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] masked ExtINT on CPU#1 [ 0.000999] Mapping cpu 1 to node 0 [ 0.000999] Calibrating delay using timer specific routine.. 4019.90 BogoMIPS (lpj=2009954) [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.236393] CPU1: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.239981] Brought up 2 CPUs [ 0.240965] Total of 2 processors activated (8040.91 BogoMIPS). [ 0.243254] calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1 [ 0.243968] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs [ 0.244966] calling net_ns_init+0x0/0xf8 @ 1 [ 0.245964] net_namespace: 1012 bytes [ 0.246967] initcall net_ns_init+0x0/0xf8 returned 0 after 976 usecs [ 0.247965] calling cpufreq_tsc+0x0/0x25 @ 1 [ 0.248965] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs [ 0.249965] calling reboot_init+0x0/0x11 @ 1 [ 0.250970] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs [ 0.251964] calling init_smp_flush+0x0/0x23 @ 1 [ 0.252964] initcall init_smp_flush+0x0/0x23 returned 0 after 0 usecs [ 0.253964] calling sysctl_init+0x0/0x29 @ 1 [ 0.256057] initcall sysctl_init+0x0/0x29 returned 0 after 976 usecs [ 0.256963] calling ksysfs_init+0x0/0x96 @ 1 [ 0.258021] initcall ksysfs_init+0x0/0x96 returned 0 after 0 usecs [ 0.258963] calling async_init+0x0/0x3c @ 1 [ 0.259988] initcall async_init+0x0/0x3c returned 0 after 0 usecs [ 0.260963] calling init_jiffies_clocksource+0x0/0xf @ 1 [ 0.261965] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs [ 0.262963] calling filelock_init+0x0/0x27 @ 1 [ 0.263966] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs [ 0.264962] calling init_aout_binfmt+0x0/0xf @ 1 [ 0.265962] initcall init_aout_binfmt+0x0/0xf returned 0 after 0 usecs [ 0.266961] calling init_script_binfmt+0x0/0xf @ 1 [ 0.267962] initcall init_script_binfmt+0x0/0xf returned 0 after 0 usecs [ 0.268961] calling init_elf_binfmt+0x0/0xf @ 1 [ 0.269961] initcall init_elf_binfmt+0x0/0xf returned 0 after 0 usecs [ 0.270961] calling debugfs_init+0x0/0x41 @ 1 [ 0.271967] initcall debugfs_init+0x0/0x41 returned 0 after 0 usecs [ 0.272961] calling securityfs_init+0x0/0x41 @ 1 [ 0.273971] initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs [ 0.274961] calling random32_init+0x0/0xa8 @ 1 [ 0.275961] initcall random32_init+0x0/0xa8 returned 0 after 0 usecs [ 0.276960] calling regulator_init+0x0/0x23 @ 1 [ 0.277959] regulator: core version 0.5 [ 0.280021] initcall regulator_init+0x0/0x23 returned 0 after 1952 usecs [ 0.280977] calling cpufreq_core_init+0x0/0x5a @ 1 [ 0.281960] initcall cpufreq_core_init+0x0/0x5a returned 0 after 0 usecs [ 0.282960] calling virtio_init+0x0/0x30 @ 1 [ 0.284020] initcall virtio_init+0x0/0x30 returned 0 after 0 usecs [ 0.284959] calling sock_init+0x0/0x51 @ 1 [ 0.286008] initcall sock_init+0x0/0x51 returned 0 after 0 usecs [ 0.286959] calling netpoll_init+0x0/0x2f @ 1 [ 0.287959] initcall netpoll_init+0x0/0x2f returned 0 after 0 usecs [ 0.288958] calling netlink_proto_init+0x0/0x101 @ 1 [ 0.289990] NET: Registered protocol family 16 [ 0.290973] initcall netlink_proto_init+0x0/0x101 returned 0 after 976 usecs [ 0.291958] calling bdi_class_init+0x0/0x35 @ 1 [ 0.293014] initcall bdi_class_init+0x0/0x35 returned 0 after 0 usecs [ 0.293958] calling kobject_uevent_init+0x0/0x3f @ 1 [ 0.294983] initcall kobject_uevent_init+0x0/0x3f returned 0 after 0 usecs [ 0.295957] calling pcibus_class_init+0x0/0x14 @ 1 [ 0.297015] initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs [ 0.297957] calling pci_driver_init+0x0/0xf @ 1 [ 0.299011] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs [ 0.299957] calling backlight_class_init+0x0/0x4d @ 1 [ 0.300996] initcall backlight_class_init+0x0/0x4d returned 0 after 0 usecs [ 0.301956] calling video_output_class_init+0x0/0x14 @ 1 [ 0.304010] initcall video_output_class_init+0x0/0x14 returned 0 after 976 usecs [ 0.304956] calling tty_class_init+0x0/0x28 @ 1 [ 0.306010] initcall tty_class_init+0x0/0x28 returned 0 after 0 usecs [ 0.306957] calling vtconsole_class_init+0x0/0xa1 @ 1 [ 0.308012] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 0 usecs [ 0.308956] calling register_node_type+0x0/0x39 @ 1 [ 0.310009] initcall register_node_type+0x0/0x39 returned 0 after 0 usecs [ 0.310956] calling spi_init+0x0/0x95 @ 1 [ 0.312011] initcall spi_init+0x0/0x95 returned 0 after 0 usecs [ 0.312954] calling i2c_init+0x0/0x54 @ 1 [ 0.314011] i2c-core: driver [dummy] registered [ 0.314955] initcall i2c_init+0x0/0x54 returned 0 after 976 usecs [ 0.315954] calling eisa_init+0x0/0x26 @ 1 [ 0.317028] EISA bus registered [ 0.317994] initcall eisa_init+0x0/0x26 returned 0 after 996 usecs [ 0.318999] calling amd_postcore_init+0x0/0x66 @ 1 [ 0.320002] initcall amd_postcore_init+0x0/0x66 returned 0 after 0 usecs [ 0.321003] calling arch_kdebugfs_init+0x0/0x1e @ 1 [ 0.322007] initcall arch_kdebugfs_init+0x0/0x1e returned 0 after 0 usecs [ 0.323003] calling init_pit_clocksource+0x0/0x95 @ 1 [ 0.324003] initcall init_pit_clocksource+0x0/0x95 returned 0 after 0 usecs [ 0.325003] calling mtrr_if_init+0x0/0x58 @ 1 [ 0.326007] initcall mtrr_if_init+0x0/0x58 returned 0 after 0 usecs [ 0.327002] calling kdump_buf_page_init+0x0/0x59 @ 1 [ 0.328015] initcall kdump_buf_page_init+0x0/0x59 returned 0 after 0 usecs [ 0.329002] calling init_cyclone_clocksource+0x0/0x17d @ 1 [ 0.330003] initcall init_cyclone_clocksource+0x0/0x17d returned -19 after 0 usecs [ 0.331002] calling pci_arch_init+0x0/0x45 @ 1 [ 0.336847] PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5 [ 0.337001] PCI: Using configuration type 1 for base access [ 0.338012] initcall pci_arch_init+0x0/0x45 returned 0 after 5859 usecs [ 0.339002] calling topology_init+0x0/0x80 @ 1 [ 0.341016] initcall topology_init+0x0/0x80 returned 0 after 976 usecs [ 0.342003] calling mtrr_init_finialize+0x0/0x35 @ 1 [ 0.343003] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs [ 0.344003] calling param_sysfs_init+0x0/0x1c0 @ 1 [ 0.362278] initcall param_sysfs_init+0x0/0x1c0 returned 0 after 16601 usecs [ 0.369004] calling readahead_init+0x0/0x2f @ 1 [ 0.374153] initcall readahead_init+0x0/0x2f returned 0 after 0 usecs [ 0.380003] calling init_bio+0x0/0xa9 @ 1 [ 0.384046] bio: create slab at 0 [ 0.388048] initcall init_bio+0x0/0xa9 returned 0 after 3906 usecs [ 0.394004] calling cryptomgr_init+0x0/0x29 @ 1 [ 0.399013] initcall cryptomgr_init+0x0/0x29 returned 0 after 0 usecs [ 0.405003] calling blk_settings_init+0x0/0x1d @ 1 [ 0.410003] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs [ 0.417003] calling blk_ioc_init+0x0/0x24 @ 1 [ 0.421006] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs [ 0.428003] calling blk_softirq_init+0x0/0x4c @ 1 [ 0.432003] initcall blk_softirq_init+0x0/0x4c returned 0 after 0 usecs [ 0.439003] calling genhd_device_init+0x0/0x50 @ 1 [ 0.444035] initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs [ 0.450004] calling pci_slot_init+0x0/0x40 @ 1 [ 0.455028] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs [ 0.461003] calling pnp_init+0x0/0xf @ 1 [ 0.465062] initcall pnp_init+0x0/0xf returned 0 after 0 usecs [ 0.471003] calling misc_init+0x0/0x84 @ 1 [ 0.475068] initcall misc_init+0x0/0x84 returned 0 after 0 usecs [ 0.481004] calling twl4030_init+0x0/0x11 @ 1 [ 0.486057] i2c-core: driver [twl4030] registered [ 0.490004] initcall twl4030_init+0x0/0x11 returned 0 after 3906 usecs [ 0.497003] calling phy_init+0x0/0x29 @ 1 [ 0.501059] initcall phy_init+0x0/0x29 returned 0 after 0 usecs [ 0.507003] calling init_scsi+0x0/0x89 @ 1 [ 0.512061] SCSI subsystem initialized [ 0.516004] initcall init_scsi+0x0/0x89 returned 0 after 4882 usecs [ 0.522003] calling ata_init+0x0/0x2b5 @ 1 [ 0.526024] libata version 3.00 loaded. [ 0.530003] initcall ata_init+0x0/0x2b5 returned 0 after 3906 usecs [ 0.536003] calling usb_init+0x0/0xf6 @ 1 [ 0.540122] usbcore: registered new interface driver usbfs [ 0.546059] usbcore: registered new interface driver hub [ 0.551057] usbcore: registered new device driver usb [ 0.556004] initcall usb_init+0x0/0xf6 returned 0 after 15625 usecs [ 0.563034] calling serio_init+0x0/0x73 @ 1 [ 0.567064] initcall serio_init+0x0/0x73 returned 0 after 0 usecs [ 0.573004] calling gameport_init+0x0/0x73 @ 1 [ 0.578047] initcall gameport_init+0x0/0x73 returned 0 after 976 usecs [ 0.584004] calling input_init+0x0/0xe2 @ 1 [ 0.588058] initcall input_init+0x0/0xe2 returned 0 after 0 usecs [ 0.594003] calling rtc_init+0x0/0x59 @ 1 [ 0.599058] initcall rtc_init+0x0/0x59 returned 0 after 976 usecs [ 0.605003] calling thermal_init+0x0/0x32 @ 1 [ 0.609057] initcall thermal_init+0x0/0x32 returned 0 after 0 usecs [ 0.615003] calling leds_init+0x0/0x36 @ 1 [ 0.620014] initcall leds_init+0x0/0x36 returned 0 after 976 usecs [ 0.626003] calling pci_subsys_init+0x0/0xf3 @ 1 [ 0.630002] PCI: Probing PCI hardware [ 0.634002] PCI: Probing PCI hardware (bus 00) [ 0.638093] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.645018] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f] [ 0.651008] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.657004] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.662010] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.668002] pci 0000:00:01.1: PME# disabled [ 0.672021] pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff] [ 0.679017] pci 0000:00:02.0: supports D1 D2 [ 0.683002] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.690002] pci 0000:00:02.0: PME# disabled [ 0.694020] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 0.701021] pci 0000:00:02.1: supports D1 D2 [ 0.705002] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.712003] pci 0000:00:02.1: PME# disabled [ 0.716022] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff] [ 0.722004] pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff] [ 0.727004] pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff] [ 0.734014] pci 0000:00:04.0: supports D1 D2 [ 0.738022] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 0.744040] pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff] [ 0.751004] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007] [ 0.756016] pci 0000:00:0a.0: supports D1 D2 [ 0.761002] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.767003] pci 0000:00:0a.0: PME# disabled [ 0.771029] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.778002] pci 0000:00:0b.0: PME# disabled [ 0.782031] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.789002] pci 0000:00:0c.0: PME# disabled [ 0.793030] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.799002] pci 0000:00:0d.0: PME# disabled [ 0.804030] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.810002] pci 0000:00:0e.0: PME# disabled [ 0.814121] pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff] [ 0.820005] pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff] [ 0.827026] pci 0000:05:07.0: supports D1 D2 [ 0.831002] pci 0000:05:07.0: PME# supported from D1 D2 D3hot [ 0.837003] pci 0000:05:07.0: PME# disabled [ 0.841022] pci 0000:00:09.0: transparent bridge [ 0.845003] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff] [ 0.851003] pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff] [ 0.858118] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.865005] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff] [ 0.870005] pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff] [ 0.877013] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.883015] pci 0000:01:00.0: supports D1 D2 [ 0.887023] pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff] [ 0.894029] pci 0000:01:00.1: supports D1 D2 [ 0.898034] pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff] [ 0.904003] pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff] [ 0.911004] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.921227] pci 0000:00:00.0: default IRQ router [10de:005e] [ 0.927072] pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 3 [ 0.933010] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 0.940026] pci 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 0.946005] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 5 [ 0.953129] initcall pci_subsys_init+0x0/0xf3 returned 0 after 315429 usecs [ 0.960003] calling proto_init+0x0/0xf @ 1 [ 0.964008] initcall proto_init+0x0/0xf returned 0 after 0 usecs [ 0.971003] calling net_dev_init+0x0/0x12c @ 1 [ 0.975063] initcall net_dev_init+0x0/0x12c returned 0 after 0 usecs [ 0.982003] calling neigh_init+0x0/0x66 @ 1 [ 0.986004] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs [ 0.992003] calling fib_rules_init+0x0/0x99 @ 1 [ 0.997004] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs [ 1.003003] calling pktsched_init+0x0/0xa9 @ 1 [ 1.007008] initcall pktsched_init+0x0/0xa9 returned 0 after 0 usecs [ 1.014003] calling tc_filter_init+0x0/0x43 @ 1 [ 1.018004] initcall tc_filter_init+0x0/0x43 returned 0 after 0 usecs [ 1.025003] calling genl_init+0x0/0xb0 @ 1 [ 1.032033] initcall genl_init+0x0/0xb0 returned 0 after 2929 usecs [ 1.038003] calling wanrouter_init+0x0/0x42 @ 1 [ 1.043053] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. [ 1.050019] initcall wanrouter_init+0x0/0x42 returned 0 after 6835 usecs [ 1.057003] calling wireless_nlevent_init+0x0/0x2f @ 1 [ 1.062003] initcall wireless_nlevent_init+0x0/0x2f returned 0 after 0 usecs [ 1.069003] calling sysctl_init+0x0/0x3b @ 1 [ 1.074004] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs [ 1.080005] calling pci_iommu_init+0x0/0xc @ 1 [ 1.084004] initcall pci_iommu_init+0x0/0xc returned 0 after 0 usecs [ 1.091004] calling print_all_ICs+0x0/0x47d @ 1 [ 1.095002] [ 1.095003] printing PIC contents [ 1.100004] ... PIC IMR: fffa [ 1.101000] ... PIC IRR: 0001 [ 1.106002] ... PIC ISR: 0001 [ 1.109003] ... PIC ELCR: 0828 [ 1.112003] [ 1.112004] printing local APIC contents on CPU#0/0: [ 1.113000] ... APIC ID: 00000000 (0) [ 1.113000] ... APIC VERSION: 00040010 [ 1.113000] ... APIC TASKPRI: 00000000 (00) [ 1.113000] ... APIC ARBPRI: 000000e0 (e0) [ 1.113000] ... APIC PROCPRI: 00000000 [ 1.113000] ... APIC LDR: 01000000 [ 1.113000] ... APIC DFR: ffffffff [ 1.113000] ... APIC SPIV: 000001ff [ 1.113000] ... APIC ISR field: [ 1.113000] 0123456789abcdef0123456789abcdef [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] ... APIC TMR field: [ 1.113000] 0123456789abcdef0123456789abcdef [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] ... APIC IRR field: [ 1.113000] 0123456789abcdef0123456789abcdef [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000010000000000000000 [ 1.113000] ... APIC ESR: 00000000 [ 1.113000] ... APIC ICR: 000008fd [ 1.113000] ... APIC ICR2: 02000000 [ 1.113000] ... APIC LVTT: 000200ef [ 1.113000] ... APIC LVTPC: 00010000 [ 1.113000] ... APIC LVT0: 00010700 [ 1.113000] ... APIC LVT1: 00000400 [ 1.113000] ... APIC LVTERR: 000000fe [ 1.113000] ... APIC TMICT: 00003112 [ 1.113000] ... APIC TMCCT: 00002032 [ 1.113000] ... APIC TDCR: 00000003 [ 1.113000] [ 1.112109] [ 1.112110] printing local APIC contents on CPU#1/1: [ 1.113000] ... APIC ID: 01000000 (1) [ 1.113000] ... APIC VERSION: 00040010 [ 1.113000] ... APIC TASKPRI: 00000000 (00) [ 1.113000] ... APIC ARBPRI: 000000e0 (e0) [ 1.113000] ... APIC PROCPRI: 00000000 [ 1.113000] ... APIC LDR: 02000000 [ 1.113000] ... APIC DFR: ffffffff [ 1.113000] ... APIC SPIV: 000001ff [ 1.113000] ... APIC ISR field: [ 1.113000] 0123456789abcdef0123456789abcdef [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] ... APIC TMR field: [ 1.113000] 0123456789abcdef0123456789abcdef [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] ... APIC IRR field: [ 1.113000] 0123456789abcdef0123456789abcdef [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000000000000000000000 [ 1.113000] 00000000000000010000000000000000 [ 1.113000] ... APIC ESR: 00000000 [ 1.113000] ... APIC ICR: 000008fb [ 1.113000] ... APIC ICR2: 01000000 [ 1.113000] ... APIC LVTT: 000200ef [ 1.113000] ... APIC LVTPC: 00010000 [ 1.113000] ... APIC LVT0: 00010700 [ 1.113000] ... APIC LVT1: 00010400 [ 1.113000] ... APIC LVTERR: 000000fe [ 1.113000] ... APIC TMICT: 00003112 [ 1.113000] ... APIC TMCCT: 00000316 [ 1.113000] ... APIC TDCR: 00000003 [ 1.113000] [ 1.314005] Clocksource tsc unstable (delta = 198850212 ns) [ 1.319008] number of MP IRQ sources: 17. [ 1.323002] number of IO-APIC #2 registers: 24. [ 1.328002] testing the IO APIC....................... [ 1.333005] [ 1.334002] IO APIC #2...... [ 1.337002] .... register #00: 00000000 [ 1.341002] ....... : physical APIC id: 00 [ 1.345002] ....... : Delivery Type: 0 [ 1.349002] ....... : LTS : 0 [ 1.353002] .... register #01: 00170011 [ 1.357002] ....... : max redirection entries: 0017 [ 1.362002] ....... : PRQ implemented: 0 [ 1.367002] ....... : IO APIC version: 0011 [ 1.371002] .... register #02: 00000000 [ 1.375002] ....... : arbitration: 00 [ 1.379002] .... IRQ redirection table: [ 1.383003] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 1.388004] 00 003 0 0 0 0 0 1 1 30 [ 1.394004] 01 003 0 0 0 0 0 1 1 31 [ 1.399004] 02 000 1 0 0 0 0 0 0 00 [ 1.404004] 03 003 1 1 0 1 0 1 1 33 [ 1.409004] 04 003 0 0 0 0 0 1 1 34 [ 1.414004] 05 003 1 1 0 1 0 1 1 35 [ 1.420004] 06 003 0 0 0 0 0 1 1 36 [ 1.425004] 07 003 1 0 0 0 0 1 1 37 [ 1.430004] 08 003 0 0 0 0 0 1 1 38 [ 1.435004] 09 003 0 0 0 0 0 1 1 39 [ 1.440004] 0a 003 0 0 0 0 0 1 1 3A [ 1.446004] 0b 003 1 1 0 1 0 1 1 3B [ 1.451004] 0c 003 0 0 0 0 0 1 1 3C [ 1.456004] 0d 003 0 0 0 0 0 1 1 3D [ 1.461004] 0e 003 0 0 0 0 0 1 1 3E [ 1.466004] 0f 003 0 0 0 0 0 1 1 3F [ 1.472004] 10 000 1 0 0 0 0 0 0 00 [ 1.477004] 11 000 1 0 0 0 0 0 0 00 [ 1.482004] 12 000 1 0 0 0 0 0 0 00 [ 1.487004] 13 000 1 0 0 0 0 0 0 00 [ 1.492004] 14 000 1 0 0 0 0 0 0 00 [ 1.498004] 15 000 1 0 0 0 0 0 0 00 [ 1.503004] 16 000 1 0 0 0 0 0 0 00 [ 1.508004] 17 000 1 0 0 0 0 0 0 00 [ 1.513003] IRQ to pin mappings: [ 1.516002] IRQ0 -> 0:0 [ 1.519174] IRQ1 -> 0:1 [ 1.521002] IRQ3 -> 0:3 [ 1.524174] IRQ4 -> 0:4 [ 1.527002] IRQ5 -> 0:5 [ 1.528693] IRQ6 -> 0:6 [ 1.531174] IRQ7 -> 0:7 [ 1.533693] IRQ8 -> 0:8 [ 1.536002] IRQ9 -> 0:9 [ 1.539174] IRQ10 -> 0:10 [ 1.541002] IRQ11 -> 0:11 [ 1.544173] IRQ12 -> 0:12 [ 1.546174] IRQ13 -> 0:13 [ 1.548780] IRQ14 -> 0:14 [ 1.552174] IRQ15 -> 0:15 [ 1.554176] .................................... done. [ 1.560004] initcall print_all_ICs+0x0/0x47d returned 0 after 454101 usecs [ 1.566004] calling hpet_late_init+0x0/0xd7 @ 1 [ 1.571004] initcall hpet_late_init+0x0/0xd7 returned -19 after 0 usecs [ 1.578004] calling init_kmmio+0x0/0x23 @ 1 [ 1.582004] initcall init_kmmio+0x0/0x23 returned 0 after 0 usecs [ 1.588004] calling clocksource_done_booting+0x0/0x11 @ 1 [ 1.593004] initcall clocksource_done_booting+0x0/0x11 returned 0 after 0 usecs [ 1.601004] calling ftrace_init_debugfs+0x0/0xe7 @ 1 [ 1.606026] initcall ftrace_init_debugfs+0x0/0xe7 returned 0 after 0 usecs [ 1.612004] calling rb_init_debugfs+0x0/0x38 @ 1 [ 1.617007] initcall rb_init_debugfs+0x0/0x38 returned 0 after 0 usecs [ 1.624004] calling tracer_init_debugfs+0x0/0x370 @ 1 [ 1.629140] initcall tracer_init_debugfs+0x0/0x370 returned 0 after 0 usecs [ 1.636004] calling init_trace_printk_function_export+0x0/0x39 @ 1 [ 1.642008] initcall init_trace_printk_function_export+0x0/0x39 returned 0 after 0 usecs [ 1.650004] calling stat_workqueue_init+0x0/0x27 @ 1 [ 1.655011] initcall stat_workqueue_init+0x0/0x27 returned 0 after 0 usecs [ 1.662004] calling init_pipe_fs+0x0/0x3d @ 1 [ 1.666023] initcall init_pipe_fs+0x0/0x3d returned 0 after 0 usecs [ 1.673004] calling init_mnt_writers+0x0/0x45 @ 1 [ 1.677004] initcall init_mnt_writers+0x0/0x45 returned 0 after 0 usecs [ 1.684003] calling eventpoll_init+0x0/0x87 @ 1 [ 1.689015] initcall eventpoll_init+0x0/0x87 returned 0 after 0 usecs [ 1.695004] calling anon_inode_init+0x0/0xe3 @ 1 [ 1.700017] initcall anon_inode_init+0x0/0xe3 returned 0 after 0 usecs [ 1.706006] calling pnp_system_init+0x0/0xf @ 1 [ 1.711062] initcall pnp_system_init+0x0/0xf returned 0 after 0 usecs [ 1.717004] calling chr_dev_init+0x0/0x89 @ 1 [ 1.723103] initcall chr_dev_init+0x0/0x89 returned 0 after 976 usecs [ 1.729015] calling firmware_class_init+0x0/0x61 @ 1 [ 1.734060] initcall firmware_class_init+0x0/0x61 returned 0 after 0 usecs [ 1.741004] calling cpufreq_gov_performance_init+0x0/0xf @ 1 [ 1.747005] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 usecs [ 1.754004] calling cpufreq_gov_powersave_init+0x0/0xf @ 1 [ 1.760005] initcall cpufreq_gov_powersave_init+0x0/0xf returned 0 after 0 usecs [ 1.767004] calling pcibios_assign_resources+0x0/0x91 @ 1 [ 1.773054] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05 [ 1.779004] pci 0000:00:09.0: IO window: 0xc000-0xcfff [ 1.784005] pci 0000:00:09.0: MEM window: 0xda000000-0xda0fffff [ 1.790003] pci 0000:00:09.0: PREFETCH window: disabled [ 1.795005] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 [ 1.801003] pci 0000:00:0b.0: IO window: disabled [ 1.806004] pci 0000:00:0b.0: MEM window: disabled [ 1.811003] pci 0000:00:0b.0: PREFETCH window: disabled [ 1.816004] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 1.822003] pci 0000:00:0c.0: IO window: disabled [ 1.827004] pci 0000:00:0c.0: MEM window: disabled [ 1.832003] pci 0000:00:0c.0: PREFETCH window: disabled [ 1.838005] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 [ 1.843003] pci 0000:00:0d.0: IO window: disabled [ 1.848004] pci 0000:00:0d.0: MEM window: disabled [ 1.853003] pci 0000:00:0d.0: PREFETCH window: disabled [ 1.859009] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 [ 1.864003] pci 0000:00:0e.0: IO window: 0xb000-0xbfff [ 1.870004] pci 0000:00:0e.0: MEM window: 0xd8000000-0xd9ffffff [ 1.876004] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 1.883008] pci 0000:00:09.0: setting latency timer to 64 [ 1.889006] pci 0000:00:0b.0: setting latency timer to 64 [ 1.894006] pci 0000:00:0c.0: setting latency timer to 64 [ 1.900006] pci 0000:00:0d.0: setting latency timer to 64 [ 1.905006] pci 0000:00:0e.0: setting latency timer to 64 [ 1.910004] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.916004] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.923004] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 1.928004] pci_bus 0000:05: resource 1 mem: [0xda000000-0xda0fffff] [ 1.935003] pci_bus 0000:05: resource 2 mem: [0x0-0x0] [ 1.940003] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 1.945004] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.952004] pci_bus 0000:04: resource 0 mem: [0x0-0x0] [ 1.957003] pci_bus 0000:04: resource 1 mem: [0x0-0x0] [ 1.962005] pci_bus 0000:04: resource 2 mem: [0x0-0x0] [ 1.967003] pci_bus 0000:04: resource 3 mem: [0x0-0x0] [ 1.972003] pci_bus 0000:03: resource 0 mem: [0x0-0x0] [ 1.978003] pci_bus 0000:03: resource 1 mem: [0x0-0x0] [ 1.983003] pci_bus 0000:03: resource 2 mem: [0x0-0x0] [ 1.988003] pci_bus 0000:03: resource 3 mem: [0x0-0x0] [ 1.993003] pci_bus 0000:02: resource 0 mem: [0x0-0x0] [ 1.998003] pci_bus 0000:02: resource 1 mem: [0x0-0x0] [ 2.003003] pci_bus 0000:02: resource 2 mem: [0x0-0x0] [ 2.008003] pci_bus 0000:02: resource 3 mem: [0x0-0x0] [ 2.013004] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 2.019004] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd9ffffff] [ 2.025004] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xd7ffffff] [ 2.032003] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 2.037005] initcall pcibios_assign_resources+0x0/0x91 returned 0 after 257812 usecs [ 2.044004] calling sysctl_core_init+0x0/0x2d @ 1 [ 2.049013] initcall sysctl_core_init+0x0/0x2d returned 0 after 0 usecs [ 2.056004] calling inet_init+0x0/0x199 @ 1 [ 2.060025] NET: Registered protocol family 2 [ 2.076081] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 2.083417] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.091526] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 2.098356] TCP: Hash tables configured (established 131072 bind 65536) [ 2.105004] TCP reno registered [ 2.111109] initcall inet_init+0x0/0x199 returned 0 after 49804 usecs [ 2.118006] calling af_unix_init+0x0/0x47 @ 1 [ 2.122012] NET: Registered protocol family 1 [ 2.126016] initcall af_unix_init+0x0/0x47 returned 0 after 3906 usecs [ 2.133005] calling populate_rootfs+0x0/0x11b @ 1 [ 2.138367] initcall populate_rootfs+0x0/0x11b returned 0 after 0 usecs [ 2.145005] calling vmx_init+0x0/0x222 @ 1 [ 2.149127] kvm: no hardware support [ 2.152006] initcall vmx_init+0x0/0x222 returned -95 after 2929 usecs [ 2.159004] initcall vmx_init+0x0/0x222 returned with error code -95 [ 2.165004] calling svm_init+0x0/0x16 @ 1 [ 2.169116] has_svn: not amd [ 2.172003] kvm: no hardware support [ 2.176004] initcall svm_init+0x0/0x16 returned -95 after 6835 usecs [ 2.182004] initcall svm_init+0x0/0x16 returned with error code -95 [ 2.188005] calling i8259A_init_sysfs+0x0/0x1d @ 1 [ 2.193064] initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 0 usecs [ 2.200004] calling sbf_init+0x0/0xda @ 1 [ 2.204007] initcall sbf_init+0x0/0xda returned 0 after 0 usecs [ 2.210005] calling i8237A_init_sysfs+0x0/0x1d @ 1 [ 2.215061] initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 0 usecs [ 2.222008] calling add_rtc_cmos+0x0/0x92 @ 1 [ 2.226058] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 2.234006] initcall add_rtc_cmos+0x0/0x92 returned 0 after 7812 usecs [ 2.240004] calling cache_sysfs_init+0x0/0x290 @ 1 [ 2.245004] initcall cache_sysfs_init+0x0/0x290 returned 0 after 0 usecs [ 2.252005] calling thermal_throttle_init_device+0x0/0x67 @ 1 [ 2.258005] initcall thermal_throttle_init_device+0x0/0x67 returned 0 after 0 usecs [ 2.265005] calling init_nonfatal_mce_checker+0x0/0x50 @ 1 [ 2.271004] Machine check exception polling timer started. [ 2.276005] initcall init_nonfatal_mce_checker+0x0/0x50 returned 0 after 4882 usecs [ 2.284005] calling eps_init+0x0/0x3e @ 1 [ 2.288007] initcall eps_init+0x0/0x3e returned -19 after 0 usecs [ 2.294005] calling cpufreq_gx_init+0x0/0x145 @ 1 [ 2.299005] initcall cpufreq_gx_init+0x0/0x145 returned -19 after 0 usecs [ 2.306005] calling speedstep_init+0x0/0x17b @ 1 [ 2.310005] initcall speedstep_init+0x0/0x17b returned -19 after 0 usecs [ 2.317005] calling speedstep_init+0x0/0xaf @ 1 [ 2.321005] initcall speedstep_init+0x0/0xaf returned -19 after 0 usecs [ 2.328005] calling ioapic_init_sysfs+0x0/0x84 @ 1 [ 2.333060] initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 0 usecs [ 2.340004] calling add_pcspkr+0x0/0x24 @ 1 [ 2.344056] initcall add_pcspkr+0x0/0x24 returned 0 after 0 usecs [ 2.350005] calling microcode_init+0x0/0xdd @ 1 [ 2.355003] microcode: no support for this CPU vendor [ 2.360004] initcall microcode_init+0x0/0xdd returned -19 after 4882 usecs [ 2.367004] calling init+0x0/0xf @ 1 [ 2.370023] initcall init+0x0/0xf returned 0 after 0 usecs [ 2.376005] calling proc_execdomains_init+0x0/0x1c @ 1 [ 2.381010] initcall proc_execdomains_init+0x0/0x1c returned 0 after 0 usecs [ 2.388004] calling ioresources_init+0x0/0x31 @ 1 [ 2.393012] initcall ioresources_init+0x0/0x31 returned 0 after 0 usecs [ 2.399004] calling uid_cache_init+0x0/0x7a @ 1 [ 2.404011] initcall uid_cache_init+0x0/0x7a returned 0 after 0 usecs [ 2.410005] calling init_posix_timers+0x0/0xa9 @ 1 [ 2.415010] initcall init_posix_timers+0x0/0xa9 returned 0 after 0 usecs [ 2.422005] calling init_posix_cpu_timers+0x0/0x8d @ 1 [ 2.427005] initcall init_posix_cpu_timers+0x0/0x8d returned 0 after 0 usecs [ 2.434005] calling nsproxy_cache_init+0x0/0x27 @ 1 [ 2.439009] initcall nsproxy_cache_init+0x0/0x27 returned 0 after 0 usecs [ 2.446005] calling create_proc_profile+0x0/0x210 @ 1 [ 2.451004] initcall create_proc_profile+0x0/0x210 returned 0 after 0 usecs [ 2.458005] calling timekeeping_init_device+0x0/0x1d @ 1 [ 2.463060] initcall timekeeping_init_device+0x0/0x1d returned 0 after 0 usecs [ 2.471005] calling init_clocksource_sysfs+0x0/0x43 @ 1 [ 2.477058] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 976 usecs [ 2.484007] calling init_timer_list_procfs+0x0/0x27 @ 1 [ 2.489009] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 0 usecs [ 2.496005] calling futex_init+0x0/0x81 @ 1 [ 2.500010] initcall futex_init+0x0/0x81 returned 0 after 0 usecs [ 2.507005] calling proc_dma_init+0x0/0x1c @ 1 [ 2.511014] initcall proc_dma_init+0x0/0x1c returned 0 after 0 usecs [ 2.517005] calling proc_modules_init+0x0/0x1c @ 1 [ 2.522008] initcall proc_modules_init+0x0/0x1c returned 0 after 0 usecs [ 2.529005] calling kallsyms_init+0x0/0x1f @ 1 [ 2.533009] initcall kallsyms_init+0x0/0x1f returned 0 after 0 usecs [ 2.540005] calling crash_save_vmcoreinfo_init+0x0/0x318 @ 1 [ 2.545028] initcall crash_save_vmcoreinfo_init+0x0/0x318 returned 0 after 0 usecs [ 2.553005] calling crash_notes_memory_init+0x0/0x31 @ 1 [ 2.558006] initcall crash_notes_memory_init+0x0/0x31 returned 0 after 0 usecs [ 2.566005] calling init_kprobes+0x0/0x112 @ 1 [ 2.573822] initcall init_kprobes+0x0/0x112 returned 0 after 3906 usecs [ 2.581005] calling utsname_sysctl_init+0x0/0x11 @ 1 [ 2.586020] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 0 usecs [ 2.592005] calling init_markers+0x0/0x20 @ 1 [ 2.597005] initcall init_markers+0x0/0x20 returned 0 after 0 usecs [ 2.603005] calling init_tracepoints+0x0/0x20 @ 1 [ 2.608005] initcall init_tracepoints+0x0/0x20 returned 0 after 0 usecs [ 2.614005] calling ftrace_mod_cmd_init+0x0/0xf @ 1 [ 2.619005] initcall ftrace_mod_cmd_init+0x0/0xf returned 0 after 0 usecs [ 2.626005] calling init_events+0x0/0x5f @ 1 [ 2.630007] initcall init_events+0x0/0x5f returned 0 after 0 usecs [ 2.637005] calling init_sched_switch_trace+0x0/0xf @ 1 [ 2.642005] Testing tracer sched_switch: .. no entries found ..FAILED! [ 2.750005] initcall init_sched_switch_trace+0x0/0xf returned -1 after 105468 usecs [ 2.757006] initcall init_sched_switch_trace+0x0/0xf returned with error code -1 [ 2.765005] calling init_function_trace+0x0/0x35 @ 1 [ 2.770004] Testing tracer function: PASSED [ 2.882716] Testing dynamic ftrace: .. filter failed count=0 ..FAILED! [ 3.117011] initcall init_function_trace+0x0/0x35 returned -1 after 338867 usecs [ 3.125006] initcall init_function_trace+0x0/0x35 returned with error code -1 [ 3.132006] calling init_irqsoff_tracer+0x0/0x11 @ 1 [ 3.137005] Testing tracer irqsoff: <4>------------[ cut here ]------------ [ 3.141002] WARNING: at kernel/trace/trace.c:466 update_max_tr_single+0xaf/0x140() [ 3.141002] Hardware name: System Product Name [ 3.141002] Modules linked in: [ 3.141002] Pid: 1, comm: swapper Not tainted 2.6.29-rc8-tip-02702-ge0d2c41-dirty #20985 [ 3.141002] Call Trace: [ 3.141002] [] warn_slowpath+0x76/0xb0 [ 3.141002] [] ? _spin_lock_irq+0x11/0x30 [ 3.141002] [] ? run_timer_softirq+0x174/0x180 [ 3.141002] [] ? _local_bh_enable+0x8b/0xa0 [ 3.141002] [] ? __do_softirq+0x172/0x180 [ 3.141002] [] ? ring_buffer_reset_cpu+0x24/0xe0 [ 3.141002] [] ? ring_buffer_reset_cpu+0xcd/0xe0 [ 3.141002] [] ? _spin_unlock_irqrestore+0x19/0x30 [ 3.141002] [] ? trace_hardirqs_off+0x21/0x30 [ 3.141002] [] ? _spin_unlock_irqrestore+0x19/0x30 [ 3.141002] [] ? ring_buffer_reset_cpu+0xcd/0xe0 [ 3.141002] [] update_max_tr_single+0xaf/0x140 [ 3.141002] [] stop_critical_timing+0x15c/0x210 [ 3.141002] [] ? register_tracer+0x10d/0x200 [ 3.141002] [] trace_hardirqs_on+0x21/0x30 [ 3.141002] [] trace_selftest_startup_irqsoff+0x53/0xb0 [ 3.141002] [] ? init_irqsoff_tracer+0x0/0x11 [ 3.141002] [] register_tracer+0x10d/0x200 [ 3.141002] [] ? init_irqsoff_tracer+0x0/0x11 [ 3.141002] [] init_irqsoff_tracer+0xd/0x11 [ 3.141002] [] do_one_initcall+0x6a/0x170 [ 3.141002] [] ? zone_statistics+0x63/0x70 [ 3.141002] [] ? __alloc_pages_internal+0xa6/0x390 [ 3.141002] [] ? put_dec+0x2a/0x100 [ 3.141002] [] ? check_valid_pointer+0x24/0x60 [ 3.141002] [] ? check_object+0x131/0x170 [ 3.141002] [] ? __slab_free+0x274/0x2a0 [ 3.141002] [] ? ida_get_new_above+0x157/0x180 [ 3.141002] [] ? ida_get_new_above+0x157/0x180 [ 3.141002] [] ? kmem_cache_free+0x8f/0xa0 [ 3.141002] [] ? ida_get_new_above+0x157/0x180 [ 3.141002] [] ? ida_get_new_above+0x157/0x180 [ 3.141002] [] ? idr_pre_get+0x4f/0x60 [ 3.141002] [] ? proc_register+0x103/0x150 [ 3.141002] [] ? create_proc_entry+0x80/0xa0 [ 3.141002] [] ? init_irq_proc+0x58/0x70 [ 3.141002] [] kernel_init+0x104/0x155 [ 3.141002] [] ? kernel_init+0x0/0x155 [ 3.141002] [] kernel_thread_helper+0x7/0x10 [ 3.141002] ---[ end trace 5a5d197966b56a2e ]--- [ 3.376012] .. no entries found ..FAILED! [ 3.380006] initcall init_irqsoff_tracer+0x0/0x11 returned 0 after 237304 usecs [ 3.388006] calling init_wakeup_tracer+0x0/0x1d @ 1 [ 3.393004] Testing tracer wakeup: PASSED [ 3.699616] Testing tracer wakeup_rt: PASSED [ 4.006613] initcall init_wakeup_tracer+0x0/0x1d returned 0 after 598633 usecs [ 4.013006] calling stack_trace_init+0x0/0x7a @ 1 [ 4.018022] initcall stack_trace_init+0x0/0x7a returned 0 after 0 usecs [ 4.025006] calling init_mmio_trace+0x0/0xf @ 1 [ 4.029007] initcall init_mmio_trace+0x0/0xf returned 0 after 0 usecs [ 4.036006] calling init_bts_trace+0x0/0xf @ 1 [ 4.040007] initcall init_bts_trace+0x0/0xf returned 0 after 0 usecs [ 4.047006] calling init_power_trace+0x0/0x10 @ 1 [ 4.051006] initcall init_power_trace+0x0/0x10 returned 0 after 0 usecs [ 4.058006] calling init_kmem_tracer+0x0/0xf @ 1 [ 4.063007] initcall init_kmem_tracer+0x0/0xf returned 0 after 0 usecs [ 4.069006] calling register_ftrace_syscalls+0x0/0x9d @ 1 [ 4.075008] initcall register_ftrace_syscalls+0x0/0x9d returned 0 after 0 usecs [ 4.082006] calling perf_counter_sysfs_init+0x0/0x14 @ 1 [ 4.087051] initcall perf_counter_sysfs_init+0x0/0x14 returned 0 after 0 usecs [ 4.094006] calling init_per_zone_pages_min+0x0/0x77 @ 1 [ 4.100041] initcall init_per_zone_pages_min+0x0/0x77 returned 0 after 0 usecs [ 4.107005] calling pdflush_init+0x0/0x11 @ 1 [ 4.111025] initcall pdflush_init+0x0/0x11 returned 0 after 0 usecs [ 4.118006] calling kswapd_init+0x0/0x48 @ 1 [ 4.122024] initcall kswapd_init+0x0/0x48 returned 0 after 0 usecs [ 4.128006] calling init_tmpfs+0x0/0xb9 @ 1 [ 4.132058] initcall init_tmpfs+0x0/0xb9 returned 0 after 0 usecs [ 4.138006] calling setup_vmstat+0x0/0xa8 @ 1 [ 4.143029] initcall setup_vmstat+0x0/0xa8 returned 0 after 0 usecs [ 4.149005] calling mm_sysfs_init+0x0/0x22 @ 1 [ 4.154013] initcall mm_sysfs_init+0x0/0x22 returned 0 after 0 usecs [ 4.160006] calling proc_vmalloc_init+0x0/0x1f @ 1 [ 4.165010] initcall proc_vmalloc_init+0x0/0x1f returned 0 after 0 usecs [ 4.171006] calling init_emergency_pool+0x0/0x58 @ 1 [ 4.176034] highmem bounce pool size: 64 pages [ 4.181006] initcall init_emergency_pool+0x0/0x58 returned 0 after 4882 usecs [ 4.188006] calling slab_proc_init+0x0/0x1f @ 1 [ 4.193010] initcall slab_proc_init+0x0/0x1f returned 0 after 0 usecs [ 4.199006] calling slab_sysfs_init+0x0/0xb6 @ 1 [ 4.218117] initcall slab_sysfs_init+0x0/0xb6 returned 0 after 13671 usecs [ 4.225006] calling fasync_init+0x0/0x24 @ 1 [ 4.229205] initcall fasync_init+0x0/0x24 returned 0 after 976 usecs [ 4.236006] calling proc_filesystems_init+0x0/0x1c @ 1 [ 4.241025] initcall proc_filesystems_init+0x0/0x1c returned 0 after 0 usecs [ 4.248006] calling dnotify_init+0x0/0x24 @ 1 [ 4.253065] initcall dnotify_init+0x0/0x24 returned 0 after 976 usecs [ 4.259006] calling inotify_setup+0x0/0x11 @ 1 [ 4.263033] initcall inotify_setup+0x0/0x11 returned 0 after 0 usecs [ 4.270005] calling inotify_user_setup+0x0/0x98 @ 1 [ 4.275126] initcall inotify_user_setup+0x0/0x98 returned 0 after 0 usecs [ 4.282006] calling aio_setup+0x0/0x9b @ 1 [ 4.286144] initcall aio_setup+0x0/0x9b returned 0 after 0 usecs [ 4.292014] calling proc_locks_init+0x0/0x1c @ 1 [ 4.297011] initcall proc_locks_init+0x0/0x1c returned 0 after 0 usecs [ 4.303006] calling init_mbcache+0x0/0x11 @ 1 [ 4.308006] initcall init_mbcache+0x0/0x11 returned 0 after 0 usecs [ 4.314006] calling dquot_init+0x0/0xc8 @ 1 [ 4.318004] VFS: Disk quotas dquot_6.5.2 [ 4.322132] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 4.329007] initcall dquot_init+0x0/0xc8 returned 0 after 10742 usecs [ 4.335006] calling init_v1_quota_format+0x0/0xf @ 1 [ 4.340006] initcall init_v1_quota_format+0x0/0xf returned 0 after 0 usecs [ 4.347006] calling init_v2_quota_format+0x0/0xf @ 1 [ 4.352006] initcall init_v2_quota_format+0x0/0xf returned 0 after 0 usecs [ 4.359006] calling proc_cmdline_init+0x0/0x1c @ 1 [ 4.364011] initcall proc_cmdline_init+0x0/0x1c returned 0 after 0 usecs [ 4.371006] calling proc_cpuinfo_init+0x0/0x1c @ 1 [ 4.375010] initcall proc_cpuinfo_init+0x0/0x1c returned 0 after 0 usecs [ 4.382006] calling proc_devices_init+0x0/0x1c @ 1 [ 4.387010] initcall proc_devices_init+0x0/0x1c returned 0 after 0 usecs [ 4.394006] calling proc_interrupts_init+0x0/0x1c @ 1 [ 4.399010] initcall proc_interrupts_init+0x0/0x1c returned 0 after 0 usecs [ 4.406006] calling proc_loadavg_init+0x0/0x1c @ 1 [ 4.411010] initcall proc_loadavg_init+0x0/0x1c returned 0 after 0 usecs [ 4.417006] calling proc_meminfo_init+0x0/0x1c @ 1 [ 4.422010] initcall proc_meminfo_init+0x0/0x1c returned 0 after 0 usecs [ 4.429006] calling proc_stat_init+0x0/0x1c @ 1 [ 4.433010] initcall proc_stat_init+0x0/0x1c returned 0 after 0 usecs [ 4.440006] calling proc_uptime_init+0x0/0x27 @ 1 [ 4.444010] initcall proc_uptime_init+0x0/0x27 returned 0 after 976 usecs [ 4.452006] calling proc_version_init+0x0/0x1c @ 1 [ 4.457010] initcall proc_version_init+0x0/0x1c returned 0 after 0 usecs [ 4.463006] calling proc_kmsg_init+0x0/0x1f @ 1 [ 4.468010] initcall proc_kmsg_init+0x0/0x1f returned 0 after 0 usecs [ 4.474006] calling proc_page_init+0x0/0x37 @ 1 [ 4.479019] initcall proc_page_init+0x0/0x37 returned 0 after 0 usecs [ 4.485006] calling init_devpts_fs+0x0/0x32 @ 1 [ 4.490025] initcall init_devpts_fs+0x0/0x32 returned 0 after 0 usecs [ 4.496006] calling init_reiserfs_fs+0x0/0x87 @ 1 [ 4.501062] initcall init_reiserfs_fs+0x0/0x87 returned 0 after 0 usecs [ 4.508006] calling init_ext3_fs+0x0/0x64 @ 1 [ 4.513061] initcall init_ext3_fs+0x0/0x64 returned 0 after 976 usecs [ 4.519008] calling journal_init+0x0/0x85 @ 1 [ 4.524169] initcall journal_init+0x0/0x85 returned 0 after 976 usecs [ 4.530007] calling init_squashfs_fs+0x0/0x5d @ 1 [ 4.535088] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 4.541007] initcall init_squashfs_fs+0x0/0x5d returned 0 after 5859 usecs [ 4.548051] calling init_ramfs_fs+0x0/0xf @ 1 [ 4.552007] initcall init_ramfs_fs+0x0/0xf returned 0 after 0 usecs [ 4.559006] calling init_fat_fs+0x0/0x46 @ 1 [ 4.563105] initcall init_fat_fs+0x0/0x46 returned 0 after 0 usecs [ 4.569006] calling init_vfat_fs+0x0/0xf @ 1 [ 4.574007] initcall init_vfat_fs+0x0/0xf returned 0 after 0 usecs [ 4.580006] calling init_msdos_fs+0x0/0xf @ 1 [ 4.584007] initcall init_msdos_fs+0x0/0xf returned 0 after 0 usecs [ 4.591006] calling init_bfs_fs+0x0/0x54 @ 1 [ 4.595106] initcall init_bfs_fs+0x0/0x54 returned 0 after 0 usecs [ 4.601006] calling init_iso9660_fs+0x0/0x64 @ 1 [ 4.606128] initcall init_iso9660_fs+0x0/0x64 returned 0 after 0 usecs [ 4.612006] calling init_hfsplus_fs+0x0/0x50 @ 1 [ 4.617109] initcall init_hfsplus_fs+0x0/0x50 returned 0 after 0 usecs [ 4.624011] calling init_hfs_fs+0x0/0x50 @ 1 [ 4.628111] initcall init_hfs_fs+0x0/0x50 returned 0 after 0 usecs [ 4.634006] calling vxfs_init+0x0/0x4d @ 1 [ 4.639061] initcall vxfs_init+0x0/0x4d returned 0 after 976 usecs [ 4.645006] calling init_nls_cp852+0x0/0xf @ 1 [ 4.649022] initcall init_nls_cp852+0x0/0xf returned 0 after 0 usecs [ 4.656006] calling init_nls_cp860+0x0/0xf @ 1 [ 4.660006] initcall init_nls_cp860+0x0/0xf returned 0 after 0 usecs [ 4.666006] calling init_nls_cp862+0x0/0xf @ 1 [ 4.671006] initcall init_nls_cp862+0x0/0xf returned 0 after 0 usecs [ 4.677006] calling init_nls_cp866+0x0/0xf @ 1 [ 4.682006] initcall init_nls_cp866+0x0/0xf returned 0 after 0 usecs [ 4.688006] calling init_nls_cp874+0x0/0xf @ 1 [ 4.693006] initcall init_nls_cp874+0x0/0xf returned 0 after 0 usecs [ 4.699006] calling init_nls_cp932+0x0/0xf @ 1 [ 4.703006] initcall init_nls_cp932+0x0/0xf returned 0 after 0 usecs [ 4.710006] calling init_nls_euc_jp+0x0/0x39 @ 1 [ 4.714007] initcall init_nls_euc_jp+0x0/0x39 returned 0 after 0 usecs [ 4.721006] calling init_nls_cp1250+0x0/0xf @ 1 [ 4.726006] initcall init_nls_cp1250+0x0/0xf returned 0 after 0 usecs [ 4.732006] calling init_nls_ascii+0x0/0xf @ 1 [ 4.736006] initcall init_nls_ascii+0x0/0xf returned 0 after 0 usecs [ 4.743006] calling init_nls_iso8859_7+0x0/0xf @ 1 [ 4.748006] initcall init_nls_iso8859_7+0x0/0xf returned 0 after 0 usecs [ 4.754006] calling init_nls_iso8859_15+0x0/0xf @ 1 [ 4.759007] initcall init_nls_iso8859_15+0x0/0xf returned 0 after 0 usecs [ 4.766006] calling init_nls_koi8_u+0x0/0xf @ 1 [ 4.771006] initcall init_nls_koi8_u+0x0/0xf returned 0 after 0 usecs [ 4.777008] calling init_nls_koi8_ru+0x0/0x39 @ 1 [ 4.782007] initcall init_nls_koi8_ru+0x0/0x39 returned 0 after 0 usecs [ 4.788006] calling init_nls_utf8+0x0/0x1f @ 1 [ 4.793007] initcall init_nls_utf8+0x0/0x1f returned 0 after 0 usecs [ 4.799006] calling init_ncp_fs+0x0/0x54 @ 1 [ 4.804117] initcall init_ncp_fs+0x0/0x54 returned 0 after 0 usecs [ 4.810007] calling init_ntfs_fs+0x0/0x199 @ 1 [ 4.814005] NTFS driver 2.1.29 [Flags: R/O]. [ 4.819125] initcall init_ntfs_fs+0x0/0x199 returned 0 after 4882 usecs [ 4.826012] calling init_efs_fs+0x0/0x5f @ 1 [ 4.830005] EFS: 1.0a - http://aeschi.ch.eu.org/efs/ [ 4.835113] initcall init_efs_fs+0x0/0x5f returned 0 after 4882 usecs [ 4.842007] calling init_romfs_fs+0x0/0x54 @ 1 [ 4.846109] initcall init_romfs_fs+0x0/0x54 returned 0 after 0 usecs [ 4.853007] calling init_befs_fs+0x0/0x6d @ 1 [ 4.857006] BeFS version: 0.9.3 [ 4.860108] initcall init_befs_fs+0x0/0x6d returned 0 after 2929 usecs [ 4.867007] calling ipc_init+0x0/0x20 @ 1 [ 4.871013] msgmni has been set to 1739 [ 4.875017] initcall ipc_init+0x0/0x20 returned 0 after 3906 usecs [ 4.881007] calling ipc_sysctl_init+0x0/0x11 @ 1 [ 4.886031] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 0 usecs [ 4.892006] calling key_proc_init+0x0/0x2c @ 1 [ 4.897011] initcall key_proc_init+0x0/0x2c returned 0 after 0 usecs [ 4.903007] calling crypto_algapi_init+0x0/0xc @ 1 [ 4.908016] initcall crypto_algapi_init+0x0/0xc returned 0 after 0 usecs [ 4.914007] calling chainiv_module_init+0x0/0xf @ 1 [ 4.919008] initcall chainiv_module_init+0x0/0xf returned 0 after 0 usecs [ 4.926007] calling eseqiv_module_init+0x0/0xf @ 1 [ 4.931007] initcall eseqiv_module_init+0x0/0xf returned 0 after 0 usecs [ 4.938007] calling seqiv_module_init+0x0/0xf @ 1 [ 4.942007] initcall seqiv_module_init+0x0/0xf returned 0 after 0 usecs [ 4.949007] calling hmac_module_init+0x0/0xf @ 1 [ 4.954007] initcall hmac_module_init+0x0/0xf returned 0 after 0 usecs [ 4.960007] calling crypto_xcbc_module_init+0x0/0xf @ 1 [ 4.965007] initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 0 usecs [ 4.973007] calling crypto_null_mod_init+0x0/0x69 @ 1 [ 4.978025] alg: No test for cipher_null (cipher_null-generic) [ 4.979049] alg: No test for digest_null (digest_null-generic) [ 4.984026] alg: No test for compress_null (compress_null-generic) [ 4.985022] initcall crypto_null_mod_init+0x0/0x69 returned 0 after 6835 usecs [ 4.992013] calling md5_mod_init+0x0/0xf @ 1 [ 4.996026] initcall md5_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.002007] calling sha1_generic_mod_init+0x0/0xf @ 1 [ 5.007025] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.014009] calling crypto_ecb_module_init+0x0/0xf @ 1 [ 5.019010] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 0 usecs [ 5.026007] calling crypto_cbc_module_init+0x0/0xf @ 1 [ 5.032007] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 usecs [ 5.039008] calling crypto_pcbc_module_init+0x0/0xf @ 1 [ 5.044007] initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 0 usecs [ 5.051007] calling crypto_module_init+0x0/0xf @ 1 [ 5.056007] initcall crypto_module_init+0x0/0xf returned 0 after 0 usecs [ 5.063007] calling crypto_module_init+0x0/0xf @ 1 [ 5.067007] initcall crypto_module_init+0x0/0xf returned 0 after 0 usecs [ 5.074007] calling crypto_ctr_module_init+0x0/0x35 @ 1 [ 5.079007] initcall crypto_ctr_module_init+0x0/0x35 returned 0 after 0 usecs [ 5.087007] calling crypto_ccm_module_init+0x0/0x4f @ 1 [ 5.092008] initcall crypto_ccm_module_init+0x0/0x4f returned 0 after 0 usecs [ 5.099007] calling des_generic_mod_init+0x0/0x33 @ 1 [ 5.104037] initcall des_generic_mod_init+0x0/0x33 returned 0 after 0 usecs [ 5.111007] calling blowfish_mod_init+0x0/0xf @ 1 [ 5.116645] initcall blowfish_mod_init+0x0/0xf returned 0 after 976 usecs [ 5.123009] calling twofish_mod_init+0x0/0xf @ 1 [ 5.128108] initcall twofish_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.134007] calling aes_init+0x0/0xf @ 1 [ 5.138042] initcall aes_init+0x0/0xf returned 0 after 0 usecs [ 5.144010] calling arc4_init+0x0/0xf @ 1 [ 5.148049] initcall arc4_init+0x0/0xf returned 0 after 0 usecs [ 5.154007] calling deflate_mod_init+0x0/0xf @ 1 [ 5.159365] initcall deflate_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.166007] calling crc32c_mod_init+0x0/0xf @ 1 [ 5.170045] initcall crc32c_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.177007] calling crypto_authenc_module_init+0x0/0xf @ 1 [ 5.182007] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 0 usecs [ 5.190007] calling lzo_mod_init+0x0/0xf @ 1 [ 5.194031] initcall lzo_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.200007] calling krng_mod_init+0x0/0xf @ 1 [ 5.205025] alg: No test for stdrng (krng) [ 5.206015] initcall krng_mod_init+0x0/0xf returned 0 after 976 usecs [ 5.212007] calling proc_genhd_init+0x0/0x31 @ 1 [ 5.217016] initcall proc_genhd_init+0x0/0x31 returned 0 after 0 usecs [ 5.223007] calling bsg_init+0x0/0x106 @ 1 [ 5.228069] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 5.235008] initcall bsg_init+0x0/0x106 returned 0 after 7812 usecs [ 5.241007] calling noop_init+0x0/0x11 @ 1 [ 5.245006] io scheduler noop registered [ 5.249007] initcall noop_init+0x0/0x11 returned 0 after 3906 usecs [ 5.256006] calling as_init+0x0/0x11 @ 1 [ 5.260005] io scheduler anticipatory registered (default) [ 5.265007] initcall as_init+0x0/0x11 returned 0 after 4882 usecs [ 5.271007] calling deadline_init+0x0/0x11 @ 1 [ 5.276005] io scheduler deadline registered [ 5.280007] initcall deadline_init+0x0/0x11 returned 0 after 3906 usecs [ 5.286007] calling libcrc32c_mod_init+0x0/0x25 @ 1 [ 5.291009] initcall libcrc32c_mod_init+0x0/0x25 returned 0 after 0 usecs [ 5.298009] calling percpu_counter_startup+0x0/0x26 @ 1 [ 5.303007] initcall percpu_counter_startup+0x0/0x26 returned 0 after 0 usecs [ 5.310007] calling dynamic_printk_init+0x0/0xe2 @ 1 [ 5.316845] initcall dynamic_printk_init+0x0/0xe2 returned 0 after 976 usecs [ 5.324007] calling pci_init+0x0/0x31 @ 1 [ 5.339090] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.345010] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 5.350011] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.356047] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.361009] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 5.367011] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.372051] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.378009] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 5.383011] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.389056] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.394009] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 5.400011] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.405026] pci 0000:01:00.0: Boot video device [ 5.410013] initcall pci_init+0x0/0x31 returned 0 after 80078 usecs [ 5.416007] calling pci_proc_init+0x0/0x5b @ 1 [ 5.420159] initcall pci_proc_init+0x0/0x5b returned 0 after 976 usecs [ 5.427007] calling pcie_portdrv_init+0x0/0x41 @ 1 [ 5.433017] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 5.434038] alloc irq_desc for 24 on cpu 0 node 0 [ 5.435003] alloc kstat_irqs on cpu 0 node 0 [ 5.435009] pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X [ 5.436093] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 5.437036] alloc irq_desc for 25 on cpu 0 node 0 [ 5.438004] alloc kstat_irqs on cpu 0 node 0 [ 5.438021] pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X [ 5.439089] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 5.440036] alloc irq_desc for 26 on cpu 0 node 0 [ 5.441004] alloc kstat_irqs on cpu 0 node 0 [ 5.441007] pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X [ 5.442075] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 5.443035] alloc irq_desc for 27 on cpu 0 node 0 [ 5.444004] alloc kstat_irqs on cpu 0 node 0 [ 5.444015] pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X [ 5.445076] initcall pcie_portdrv_init+0x0/0x41 returned 0 after 12695 usecs [ 5.452029] calling aer_service_init+0x0/0x1d @ 1 [ 5.457070] initcall aer_service_init+0x0/0x1d returned 0 after 0 usecs [ 5.463007] calling kb3886_init+0x0/0x35 @ 1 [ 5.468041] initcall kb3886_init+0x0/0x35 returned -19 after 0 usecs [ 5.474007] calling display_class_init+0x0/0x69 @ 1 [ 5.479066] initcall display_class_init+0x0/0x69 returned 0 after 0 usecs [ 5.486007] calling isapnp_init+0x0/0xc9b @ 1 [ 5.490022] isapnp: Scanning for PnP cards... [ 5.849533] isapnp: No Plug & Play device found [ 5.854007] initcall isapnp_init+0x0/0xc9b returned 0 after 355469 usecs [ 5.861009] calling rand_initialize+0x0/0x30 @ 1 [ 5.866041] initcall rand_initialize+0x0/0x30 returned 0 after 0 usecs [ 5.872007] calling tty_init+0x0/0xd5 @ 1 [ 5.885141] initcall tty_init+0x0/0xd5 returned 0 after 8789 usecs [ 5.891170] calling pty_init+0x0/0x4ab @ 1 [ 5.973163] initcall pty_init+0x0/0x4ab returned 0 after 76171 usecs [ 5.979008] calling sysrq_init+0x0/0x1f @ 1 [ 5.984122] initcall sysrq_init+0x0/0x1f returned 0 after 0 usecs [ 5.990007] calling cy_init+0x0/0x3c7 @ 1 [ 5.994007] Cyclades driver 2.5 (built Mar 18 2009 10:17:06) [ 6.012171] initcall cy_init+0x0/0x3c7 returned 0 after 17578 usecs [ 6.019008] calling specialix_init_module+0x0/0x340 @ 1 [ 6.024134] sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998. [ 6.030006] sx: derived from work (c) D.Gorodchanin 1994-1996. [ 6.036006] sx: DTR/RTS pin is always RTS. [ 6.050233] sx0: specialix IO8+ Board at 0x100 not found. [ 6.056017] sx1: specialix IO8+ Board at 0x180 not found. [ 6.061127] sx2: specialix IO8+ Board at 0x250 not found. [ 6.067018] sx3: specialix IO8+ Board at 0x260 not found. [ 6.086065] sx: No specialix IO8+ boards detected. [ 6.090011] initcall specialix_init_module+0x0/0x340 returned -5 after 64453 usecs [ 6.098033] initcall specialix_init_module+0x0/0x340 returned with error code -5 [ 6.105007] calling ip2_loadmain+0x0/0x1114 @ 1 [ 6.110007] Computone IntelliPort Plus multiport driver version 1.2.14 [ 6.117066] initcall ip2_loadmain+0x0/0x1114 returned 0 after 6835 usecs [ 6.123008] calling synclink_init+0x0/0x217 @ 1 [ 6.128118] SyncLink serial driver $Revision: 4.38 $ [ 6.155106] SyncLink serial driver $Revision: 4.38 $, tty major#253 [ 6.161010] initcall synclink_init+0x0/0x217 returned 0 after 32226 usecs [ 6.168125] calling rio_init+0x0/0xb3a @ 1 [ 6.174069] initcall rio_init+0x0/0xb3a returned -5 after 1953 usecs [ 6.180008] initcall rio_init+0x0/0xb3a returned with error code -5 [ 6.186042] calling init+0x0/0xf @ 1 [ 6.190065] initcall init+0x0/0xf returned 0 after 0 usecs [ 6.196068] calling dtlk_init+0x0/0x1af @ 1 [ 6.200045] DoubleTalk PC - not found [ 6.204014] initcall dtlk_init+0x0/0x1af returned -19 after 3906 usecs [ 6.210007] calling applicom_init+0x0/0x41f @ 1 [ 6.215006] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 6.222010] ac.o: No PCI boards found. [ 6.225006] ac.o: For an ISA board you must supply memory and irq parameters. [ 6.233007] initcall applicom_init+0x0/0x41f returned -6 after 17578 usecs [ 6.239007] initcall applicom_init+0x0/0x41f returned with error code -6 [ 6.246007] calling sonypi_init+0x0/0x79 @ 1 [ 6.250006] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 6.257009] initcall sonypi_init+0x0/0x79 returned -19 after 6835 usecs [ 6.263007] calling mod_init+0x0/0x1cb @ 1 [ 6.267131] initcall mod_init+0x0/0x1cb returned -19 after 976 usecs [ 6.274007] calling mod_init+0x0/0x41 @ 1 [ 6.278007] initcall mod_init+0x0/0x41 returned -19 after 0 usecs [ 6.284007] calling init+0x0/0x68 @ 1 [ 6.288064] initcall init+0x0/0x68 returned 0 after 0 usecs [ 6.293008] calling tlclk_init+0x0/0x1a5 @ 1 [ 6.298026] telclk_interrup = 0xf non-mcpbl0010 hw. [ 6.302017] initcall tlclk_init+0x0/0x1a5 returned -6 after 3906 usecs [ 6.309008] initcall tlclk_init+0x0/0x1a5 returned with error code -6 [ 6.315007] calling ipmi_init_msghandler_mod+0x0/0xc @ 1 [ 6.321064] ipmi message handler version 39.2 [ 6.325028] initcall ipmi_init_msghandler_mod+0x0/0xc returned 0 after 3906 usecs [ 6.333021] calling init_ipmi_devintf+0x0/0xd1 @ 1 [ 6.337006] ipmi device interface [ 6.341064] initcall init_ipmi_devintf+0x0/0xd1 returned 0 after 3906 usecs [ 6.348008] calling hangcheck_init+0x0/0x95 @ 1 [ 6.352007] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 6.361006] Hangcheck: Using get_cycles(). [ 6.365008] initcall hangcheck_init+0x0/0x95 returned 0 after 12695 usecs [ 6.372007] calling serial8250_init+0x0/0xf4 @ 1 [ 6.377007] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 6.383091] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 6.390132] initcall serial8250_init+0x0/0xf4 returned 0 after 12695 usecs [ 6.397008] calling serial8250_pci_init+0x0/0x16 @ 1 [ 6.402074] initcall serial8250_pci_init+0x0/0x16 returned 0 after 0 usecs [ 6.409008] calling fourport_init+0x0/0xf @ 1 [ 6.417210] initcall fourport_init+0x0/0xf returned 0 after 3906 usecs [ 6.424008] calling hub6_init+0x0/0xf @ 1 [ 6.434214] initcall hub6_init+0x0/0xf returned 0 after 5859 usecs [ 6.440010] calling isa_bus_init+0x0/0x33 @ 1 [ 6.445065] initcall isa_bus_init+0x0/0x33 returned 0 after 0 usecs [ 6.451009] calling topology_sysfs_init+0x0/0x4c @ 1 [ 6.456050] initcall topology_sysfs_init+0x0/0x4c returned 0 after 0 usecs [ 6.463008] calling cpqarray_init+0x0/0x24f @ 1 [ 6.467006] Compaq SMART2 Driver (v 2.6.0) [ 6.472068] initcall cpqarray_init+0x0/0x24f returned -19 after 4882 usecs [ 6.479008] calling cciss_init+0x0/0x20 @ 1 [ 6.483006] HP CISS Driver (v 3.6.20) [ 6.487020] initcall cciss_init+0x0/0x20 returned 0 after 3906 usecs [ 6.493008] calling init+0x0/0x24 @ 1 [ 6.497064] initcall init+0x0/0x24 returned 0 after 0 usecs [ 6.502008] calling carm_init+0x0/0x16 @ 1 [ 6.506069] initcall carm_init+0x0/0x16 returned 0 after 0 usecs [ 6.512008] calling sm501_base_init+0x0/0x20 @ 1 [ 6.517067] initcall sm501_base_init+0x0/0x20 returned 0 after 0 usecs [ 6.524008] calling e1000_init_module+0x0/0x6e @ 1 [ 6.528008] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 6.535007] Copyright (c) 1999-2006 Intel Corporation. [ 6.540070] initcall e1000_init_module+0x0/0x6e returned 0 after 11718 usecs [ 6.547008] calling e1000_init_module+0x0/0x53 @ 1 [ 6.552007] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 6.558006] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 6.564070] initcall e1000_init_module+0x0/0x53 returned 0 after 11718 usecs [ 6.571008] calling igb_init_module+0x0/0x43 @ 1 [ 6.576007] Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2 [ 6.582009] Copyright (c) 2008 Intel Corporation. [ 6.587064] initcall igb_init_module+0x0/0x43 returned 0 after 10742 usecs [ 6.594008] calling atl1_init_module+0x0/0x16 @ 1 [ 6.599064] initcall atl1_init_module+0x0/0x16 returned 0 after 0 usecs [ 6.605008] calling atl1e_init_module+0x0/0x16 @ 1 [ 6.610063] initcall atl1e_init_module+0x0/0x16 returned 0 after 0 usecs [ 6.617008] calling gem_init+0x0/0x16 @ 1 [ 6.621064] initcall gem_init+0x0/0x16 returned 0 after 0 usecs [ 6.627008] calling vortex_init+0x0/0xbf @ 1 [ 6.631078] initcall vortex_init+0x0/0xbf returned 0 after 0 usecs [ 6.637009] calling pcnet32_init_module+0x0/0x10a @ 1 [ 6.643007] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 6.649066] initcall pcnet32_init_module+0x0/0x10a returned 0 after 5859 usecs [ 6.656008] calling e100_init_module+0x0/0x4d @ 1 [ 6.661007] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI [ 6.667007] e100: Copyright(c) 1999-2006 Intel Corporation [ 6.672064] initcall e100_init_module+0x0/0x4d returned 0 after 10742 usecs [ 6.679008] calling tlan_probe+0x0/0x269 @ 1 [ 6.684029] ThunderLAN driver v1.15a [ 6.687067] TLAN: 0 devices installed, PCI: 0 EISA: 0 [ 6.692064] initcall tlan_probe+0x0/0x269 returned -19 after 7812 usecs [ 6.699008] calling epic_init+0x0/0x16 @ 1 [ 6.703064] initcall epic_init+0x0/0x16 returned 0 after 0 usecs [ 6.709009] calling smsc9420_init_module+0x0/0x39 @ 1 [ 6.714070] initcall smsc9420_init_module+0x0/0x39 returned 0 after 0 usecs [ 6.721008] calling sis190_init_module+0x0/0x16 @ 1 [ 6.726066] initcall sis190_init_module+0x0/0x16 returned 0 after 0 usecs [ 6.733011] calling r6040_init+0x0/0x16 @ 1 [ 6.737064] initcall r6040_init+0x0/0x16 returned 0 after 0 usecs [ 6.743027] calling yellowfin_init+0x0/0x16 @ 1 [ 6.748067] initcall yellowfin_init+0x0/0x16 returned 0 after 0 usecs [ 6.754008] calling tg3_init+0x0/0x16 @ 1 [ 6.759026] initcall tg3_init+0x0/0x16 returned 0 after 976 usecs [ 6.765008] calling sky2_init_module+0x0/0x47 @ 1 [ 6.769015] sky2 driver version 1.22 [ 6.773070] initcall sky2_init_module+0x0/0x47 returned 0 after 3906 usecs [ 6.780009] calling starfire_init+0x0/0x16 @ 1 [ 6.784064] initcall starfire_init+0x0/0x16 returned 0 after 0 usecs [ 6.791008] calling cicada_init+0x0/0x33 @ 1 [ 6.795066] initcall cicada_init+0x0/0x33 returned 0 after 0 usecs [ 6.801008] calling lxt_init+0x0/0x33 @ 1 [ 6.806064] initcall lxt_init+0x0/0x33 returned 0 after 976 usecs [ 6.812008] calling smsc_init+0x0/0x67 @ 1 [ 6.816067] initcall smsc_init+0x0/0x67 returned 0 after 0 usecs [ 6.822008] calling vsc82xx_init+0x0/0x33 @ 1 [ 6.827067] initcall vsc82xx_init+0x0/0x33 returned 0 after 976 usecs [ 6.834009] calling broadcom_init+0x0/0xdb @ 1 [ 6.839101] initcall broadcom_init+0x0/0xdb returned 0 after 976 usecs [ 6.846009] calling sundance_init+0x0/0x16 @ 1 [ 6.850066] initcall sundance_init+0x0/0x16 returned 0 after 0 usecs [ 6.856009] calling net_olddevs_init+0x0/0x82 @ 1 [ 6.861128] initcall net_olddevs_init+0x0/0x82 returned 0 after 0 usecs [ 6.868008] calling init_nic+0x0/0x16 @ 1 [ 6.872023] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62. [ 6.873062] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 6.874055] nv_probe: set workaround bit for reversed mac addr [ 7.387307] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12 [ 7.388009] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 [ 7.389068] initcall init_nic+0x0/0x16 returned 0 after 504883 usecs [ 7.396027] calling ql3xxx_init_module+0x0/0x16 @ 1 [ 7.401073] initcall ql3xxx_init_module+0x0/0x16 returned 0 after 0 usecs [ 7.407009] calling ppp_init+0x0/0x8a @ 1 [ 7.411024] PPP generic driver version 2.4.2 [ 7.416096] initcall ppp_init+0x0/0x8a returned 0 after 4882 usecs [ 7.422009] calling ppp_sync_init+0x0/0x2d @ 1 [ 7.427018] initcall ppp_sync_init+0x0/0x2d returned 0 after 0 usecs [ 7.433009] calling pppox_init+0x0/0xf @ 1 [ 7.437008] NET: Registered protocol family 24 [ 7.441009] initcall pppox_init+0x0/0xf returned 0 after 3906 usecs [ 7.448009] calling pppoe_init+0x0/0x87 @ 1 [ 7.452021] initcall pppoe_init+0x0/0x87 returned 0 after 0 usecs [ 7.458009] calling pppol2tp_init+0x0/0x7e @ 1 [ 7.463012] PPPoL2TP kernel driver, V1.0 [ 7.466009] initcall pppol2tp_init+0x0/0x7e returned 0 after 2929 usecs [ 7.473009] calling slip_init+0x0/0xa3 @ 1 [ 7.477008] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 7.487007] CSLIP: code copyright 1989 Regents of the University of California. [ 7.494007] SLIP linefill/keepalive option. [ 7.498012] initcall slip_init+0x0/0xa3 returned 0 after 20507 usecs [ 7.505009] calling dummy_init_module+0x0/0x95 @ 1 [ 7.510212] initcall dummy_init_module+0x0/0x95 returned 0 after 976 usecs [ 7.517010] calling rtl8139_init_module+0x0/0x16 @ 1 [ 7.522033] 8139too Fast Ethernet driver 0.9.28 [ 7.524202] eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11 [ 7.525008] eth1: Identified 8139 chip type 'RTL-8139B' [ 7.527069] initcall rtl8139_init_module+0x0/0x16 returned 0 after 4882 usecs [ 7.534027] calling sc92031_init+0x0/0x20 @ 1 [ 7.538008] Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c [ 7.544071] initcall sc92031_init+0x0/0x20 returned 0 after 5859 usecs [ 7.551009] calling eql_init_module+0x0/0x50 @ 1 [ 7.555007] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) [ 7.564217] initcall eql_init_module+0x0/0x50 returned 0 after 8789 usecs [ 7.571009] calling veth_init+0x0/0xf @ 1 [ 7.575019] initcall veth_init+0x0/0xf returned 0 after 0 usecs [ 7.581009] calling enc28j60_init+0x0/0x1e @ 1 [ 7.585065] initcall enc28j60_init+0x0/0x1e returned 0 after 0 usecs [ 7.592009] calling streamer_init_module+0x0/0x16 @ 1 [ 7.597073] initcall streamer_init_module+0x0/0x16 returned 0 after 0 usecs [ 7.604009] calling abyss_init+0x0/0x16 @ 1 [ 7.608065] initcall abyss_init+0x0/0x16 returned 0 after 0 usecs [ 7.614009] calling hdlc_module_init+0x0/0x37 @ 1 [ 7.619011] HDLC support module revision 1.22 [ 7.623010] initcall hdlc_module_init+0x0/0x37 returned 0 after 3906 usecs [ 7.630009] calling mod_init+0x0/0x11 @ 1 [ 7.634009] initcall mod_init+0x0/0x11 returned 0 after 0 usecs [ 7.640009] calling mod_init+0x0/0x11 @ 1 [ 7.644011] initcall mod_init+0x0/0x11 returned 0 after 0 usecs [ 7.650009] calling mod_init+0x0/0x39 @ 1 [ 7.654009] initcall mod_init+0x0/0x39 returned 0 after 0 usecs [ 7.660009] calling fst_init+0x0/0x33 @ 1 [ 7.664065] initcall fst_init+0x0/0x33 returned 0 after 0 usecs [ 7.670009] calling pc300_init_module+0x0/0x5c @ 1 [ 7.675064] initcall pc300_init_module+0x0/0x5c returned 0 after 0 usecs [ 7.682009] calling arcnet_init+0x0/0x50 @ 1 [ 7.686007] arcnet loaded. [ 7.689009] initcall arcnet_init+0x0/0x50 returned 0 after 2929 usecs [ 7.695009] calling arcnet_rfc1201_init+0x0/0x65 @ 1 [ 7.700007] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 7.707009] initcall arcnet_rfc1201_init+0x0/0x65 returned 0 after 6835 usecs [ 7.714009] calling com90xx_init+0x0/0xd79 @ 1 [ 7.718013] arcnet: COM90xx chipset support [ 8.022900] S3: No ARCnet cards found. [ 8.027017] initcall com90xx_init+0x0/0xd79 returned -5 after 301758 usecs [ 8.034010] initcall com90xx_init+0x0/0xd79 returned with error code -5 [ 8.040009] calling arc_rimi_init+0x0/0x41f @ 1 [ 8.045023] arcnet: RIM I (entirely mem-mapped) support [ 8.050008] E-mail me if you actually test the RIM I driver, please! [ 8.056009] arc%d: Given: node 00h, shmem 0h, irq 0 [ 8.061008] arc%d: No autoprobe for RIM I; you must specify the shmem and irq! [ 8.069019] initcall arc_rimi_init+0x0/0x41f returned -5 after 23437 usecs [ 8.075010] initcall arc_rimi_init+0x0/0x41f returned with error code -5 [ 8.082009] calling pegasus_init+0x0/0x126 @ 1 [ 8.087008] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 8.094065] usbcore: registered new interface driver pegasus [ 8.100012] initcall pegasus_init+0x0/0x126 returned 0 after 12695 usecs [ 8.107010] calling strip_init_driver+0x0/0x57 @ 1 [ 8.111008] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels) [ 8.118015] initcall strip_init_driver+0x0/0x57 returned 0 after 6835 usecs [ 8.125010] calling init_netconsole+0x0/0x1af @ 1 [ 8.129010] console [netcon0] enabled [ 8.133008] netconsole: network logging started [ 8.138010] initcall init_netconsole+0x0/0x1af returned 0 after 8789 usecs [ 8.144010] calling spi_transport_init+0x0/0x27 @ 1 [ 8.150065] initcall spi_transport_init+0x0/0x27 returned 0 after 976 usecs [ 8.156012] calling fc_transport_init+0x0/0x43 @ 1 [ 8.162069] initcall fc_transport_init+0x0/0x43 returned 0 after 976 usecs [ 8.168010] calling sas_transport_init+0x0/0x9f @ 1 [ 8.174100] initcall sas_transport_init+0x0/0x9f returned 0 after 976 usecs [ 8.181010] calling scsi_dh_init+0x0/0x34 @ 1 [ 8.185010] initcall scsi_dh_init+0x0/0x34 returned 0 after 0 usecs [ 8.192009] calling clariion_init+0x0/0x2c @ 1 [ 8.196008] emc: device handler registered [ 8.200009] initcall clariion_init+0x0/0x2c returned 0 after 3906 usecs [ 8.207009] calling ahc_linux_init+0x0/0x61 @ 1 [ 8.212068] initcall ahc_linux_init+0x0/0x61 returned 0 after 976 usecs [ 8.218010] calling init_osst+0x0/0x10f @ 1 [ 8.222075] osst :I: Tape driver with OnStream support version 0.99.4 [ 8.222077] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 8.236071] Driver 'osst' needs updating - please use bus_type methods [ 8.242067] initcall init_osst+0x0/0x10f returned 0 after 19531 usecs [ 8.248027] calling init_sd+0x0/0xdb @ 1 [ 8.253069] Driver 'sd' needs updating - please use bus_type methods [ 8.259066] initcall init_sd+0x0/0xdb returned 0 after 6835 usecs [ 8.265038] calling init_ch_module+0x0/0x8c @ 1 [ 8.270008] SCSI Media Changer driver v0.25 [ 8.274065] Driver 'ch' needs updating - please use bus_type methods [ 8.280067] initcall init_ch_module+0x0/0x8c returned 0 after 9765 usecs [ 8.287009] calling ahci_init+0x0/0x16 @ 1 [ 8.291075] initcall ahci_init+0x0/0x16 returned 0 after 0 usecs [ 8.297010] calling piix_init+0x0/0x24 @ 1 [ 8.301065] initcall piix_init+0x0/0x24 returned 0 after 0 usecs [ 8.307012] calling pdc_ata_init+0x0/0x16 @ 1 [ 8.312065] initcall pdc_ata_init+0x0/0x16 returned 0 after 0 usecs [ 8.318010] calling svia_init+0x0/0x16 @ 1 [ 8.322065] initcall svia_init+0x0/0x16 returned 0 after 0 usecs [ 8.328010] calling vsc_sata_init+0x0/0x16 @ 1 [ 8.333065] initcall vsc_sata_init+0x0/0x16 returned 0 after 0 usecs [ 8.339010] calling nv_init+0x0/0x16 @ 1 [ 8.343065] initcall nv_init+0x0/0x16 returned 0 after 0 usecs [ 8.349010] calling uli_init+0x0/0x16 @ 1 [ 8.353065] initcall uli_init+0x0/0x16 returned 0 after 0 usecs [ 8.359010] calling inic_init+0x0/0x16 @ 1 [ 8.363065] initcall inic_init+0x0/0x16 returned 0 after 0 usecs [ 8.369010] calling amd_init+0x0/0x16 @ 1 [ 8.373023] pata_amd 0000:00:06.0: version 0.4.1 [ 8.374075] pata_amd 0000:00:06.0: setting latency timer to 64 [ 8.375080] scsi0 : pata_amd [ 8.377161] scsi1 : pata_amd [ 8.378101] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 8.379017] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 8.539029] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100 [ 8.545010] ata1.00: 488397168 sectors, multi 1: LBA48 [ 8.550029] ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0 [ 8.570043] ata1.00: configured for UDMA/100 [ 8.574012] async_waiting @ 9 [ 8.575009] async_continuing @ 9 after 0 usec [ 8.576162] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 [ 8.578079] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [ 8.579041] sd 0:0:0:0: [sda] Write Protect is off [ 8.580010] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.581067] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.582113] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [ 8.583036] sd 0:0:0:0: [sda] Write Protect is off [ 8.584009] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.585060] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.586011] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 8.676041] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.678020] async_waiting @ 9 [ 8.679009] async_continuing @ 9 after 0 usec [ 8.845243] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66 [ 8.851030] ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0 [ 8.866193] ata2.01: configured for UDMA/33 [ 8.872088] async_waiting @ 9 [ 8.873009] async_continuing @ 9 after 0 usec [ 8.874121] scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5 [ 8.876118] initcall amd_init+0x0/0x16 returned 0 after 491211 usecs [ 8.882011] calling atiixp_init+0x0/0x16 @ 1 [ 8.887089] initcall atiixp_init+0x0/0x16 returned 0 after 976 usecs [ 8.893011] calling cmd640_init+0x0/0x16 @ 1 [ 8.897106] initcall cmd640_init+0x0/0x16 returned 0 after 0 usecs [ 8.903010] calling cmd64x_init+0x0/0x16 @ 1 [ 8.908066] initcall cmd64x_init+0x0/0x16 returned 0 after 0 usecs [ 8.914010] calling cs5520_init+0x0/0x16 @ 1 [ 8.918077] initcall cs5520_init+0x0/0x16 returned 0 after 0 usecs [ 8.925010] calling hpt37x_init+0x0/0x16 @ 1 [ 8.929065] initcall hpt37x_init+0x0/0x16 returned 0 after 0 usecs [ 8.935010] calling hpt3x2n_init+0x0/0x16 @ 1 [ 8.940066] initcall hpt3x2n_init+0x0/0x16 returned 0 after 0 usecs [ 8.946010] calling it821x_init+0x0/0x16 @ 1 [ 8.950075] initcall it821x_init+0x0/0x16 returned 0 after 0 usecs [ 8.956010] calling ns87415_init+0x0/0x16 @ 1 [ 8.961066] initcall ns87415_init+0x0/0x16 returned 0 after 0 usecs [ 8.967010] calling oldpiix_init+0x0/0x16 @ 1 [ 8.972068] initcall oldpiix_init+0x0/0x16 returned 0 after 976 usecs [ 8.978011] calling qdi_init+0x0/0x1b4 @ 1 [ 8.982011] initcall qdi_init+0x0/0x1b4 returned -19 after 0 usecs [ 8.988010] calling serverworks_init+0x0/0x16 @ 1 [ 8.993067] initcall serverworks_init+0x0/0x16 returned 0 after 0 usecs [ 9.000011] calling sil680_init+0x0/0x16 @ 1 [ 9.004066] initcall sil680_init+0x0/0x16 returned 0 after 0 usecs [ 9.010010] calling sis_init+0x0/0x16 @ 1 [ 9.014066] initcall sis_init+0x0/0x16 returned 0 after 0 usecs [ 9.020010] calling i2o_iop_init+0x0/0x41 @ 1 [ 9.025008] I2O subsystem v1.325 [ 9.028009] i2o: max drivers = 8 [ 9.031077] initcall i2o_iop_init+0x0/0x41 returned 0 after 5859 usecs [ 9.038011] calling i2o_config_init+0x0/0x82 @ 1 [ 9.043008] I2O Configuration OSM v1.323 [ 9.047131] initcall i2o_config_init+0x0/0x82 returned 0 after 3906 usecs [ 9.053011] calling i2o_bus_init+0x0/0x37 @ 1 [ 9.058009] I2O Bus Adapter OSM v1.317 [ 9.062065] initcall i2o_bus_init+0x0/0x37 returned 0 after 3906 usecs [ 9.068011] calling fusion_init+0x0/0x10c @ 1 [ 9.073009] Fusion MPT base driver 3.04.07 [ 9.077008] Copyright (c) 1999-2008 LSI Corporation [ 9.081031] initcall fusion_init+0x0/0x10c returned 0 after 8789 usecs [ 9.088012] calling mptspi_init+0x0/0xb9 @ 1 [ 9.092009] Fusion MPT SPI Host driver 3.04.07 [ 9.097066] initcall mptspi_init+0x0/0xb9 returned 0 after 4882 usecs [ 9.103011] calling mptsas_init+0x0/0xd1 @ 1 [ 9.108009] Fusion MPT SAS Host driver 3.04.07 [ 9.112065] initcall mptsas_init+0x0/0xd1 returned 0 after 3906 usecs [ 9.118011] calling uio_init+0x0/0x7 @ 1 [ 9.122010] initcall uio_init+0x0/0x7 returned 0 after 0 usecs [ 9.128011] calling sercos3_init_module+0x0/0x16 @ 1 [ 9.133066] initcall sercos3_init_module+0x0/0x16 returned 0 after 0 usecs [ 9.140011] calling spidev_init+0x0/0x82 @ 1 [ 9.145070] initcall spidev_init+0x0/0x82 returned 0 after 976 usecs [ 9.151014] calling uwb_subsys_init+0x0/0x46 @ 1 [ 9.156066] initcall uwb_subsys_init+0x0/0x46 returned 0 after 0 usecs [ 9.162011] calling wlp_subsys_init+0x0/0x7 @ 1 [ 9.167011] initcall wlp_subsys_init+0x0/0x7 returned 0 after 0 usecs [ 9.173011] calling hwarc_driver_init+0x0/0x16 @ 1 [ 9.178066] usbcore: registered new interface driver hwa-rc [ 9.184013] initcall hwarc_driver_init+0x0/0x16 returned 0 after 5859 usecs [ 9.191011] calling ehci_hcd_init+0x0/0xbe @ 1 [ 9.195009] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.202010] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 [ 9.208028] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table [ 9.209034] ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup! [ 9.210011] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19 [ 9.211079] initcall ehci_hcd_init+0x0/0xbe returned 0 after 15625 usecs [ 9.218011] calling isp116x_init+0x0/0x38 @ 1 [ 9.222010] 116x: driver isp116x-hcd, 03 Nov 2005 [ 9.227069] initcall isp116x_init+0x0/0x38 returned 0 after 4882 usecs [ 9.233011] calling ohci_hcd_mod_init+0x0/0xb1 @ 1 [ 9.238029] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.244010] ohci_hcd: block sizes: ed 64 td 64 [ 9.249028] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table [ 9.250025] ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup! [ 9.251011] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19 [ 9.252125] initcall ohci_hcd_mod_init+0x0/0xb1 returned 0 after 13671 usecs [ 9.259016] calling uhci_hcd_init+0x0/0x107 @ 1 [ 9.264010] uhci_hcd: USB Universal Host Controller Interface driver [ 9.270074] initcall uhci_hcd_init+0x0/0x107 returned 0 after 5859 usecs [ 9.277011] calling r8a66597_init+0x0/0x38 @ 1 [ 9.282036] r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008 [ 9.287069] initcall r8a66597_init+0x0/0x38 returned 0 after 4882 usecs [ 9.294011] calling isp1760_init+0x0/0x2a @ 1 [ 9.299071] initcall isp1760_init+0x0/0x2a returned 0 after 976 usecs [ 9.305019] calling wusbcore_init+0x0/0x66 @ 1 [ 9.309030] initcall wusbcore_init+0x0/0x66 returned 0 after 0 usecs [ 9.316011] calling cbaf_driver_init+0x0/0x16 @ 1 [ 9.321069] usbcore: registered new interface driver wusb-cbaf [ 9.326013] initcall cbaf_driver_init+0x0/0x16 returned 0 after 4882 usecs [ 9.333029] calling usb_stor_init+0x0/0x42 @ 1 [ 9.338009] Initializing USB Mass Storage driver... [ 9.343069] usbcore: registered new interface driver usb-storage [ 9.349018] USB Mass Storage support registered. [ 9.353011] initcall usb_stor_init+0x0/0x42 returned 0 after 14648 usecs [ 9.360011] calling usb_usual_init+0x0/0x30 @ 1 [ 9.365067] usbcore: registered new interface driver libusual [ 9.370013] initcall usb_usual_init+0x0/0x30 returned 0 after 5859 usecs [ 9.377019] calling adu_init+0x0/0x7b @ 1 [ 9.381009] drivers/usb/misc/adutux.c : adu_init : enter [ 9.387060] usbcore: registered new interface driver adutux [ 9.392010] adutux adutux (see www.ontrak.net) v0.0.13 [ 9.397009] adutux is an experimental driver. Use at your own risk [ 9.403009] drivers/usb/misc/adutux.c : adu_init : leave, return value 0 [ 9.410011] initcall adu_init+0x0/0x7b returned 0 after 28320 usecs [ 9.416011] calling appledisplay_init+0x0/0x4b @ 1 [ 9.421066] usbcore: registered new interface driver appledisplay [ 9.427013] initcall appledisplay_init+0x0/0x4b returned 0 after 5859 usecs [ 9.434013] calling cypress_init+0x0/0x2f @ 1 [ 9.439066] usbcore: registered new interface driver cypress_cy7c63 [ 9.445013] initcall cypress_init+0x0/0x2f returned 0 after 5859 usecs [ 9.452011] calling emi26_init+0x0/0x16 @ 1 [ 9.456066] usbcore: registered new interface driver emi26 - firmware loader [ 9.463013] initcall emi26_init+0x0/0x16 returned 0 after 6835 usecs [ 9.469011] calling usb_idmouse_init+0x0/0x3a @ 1 [ 9.474009] idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver [ 9.480066] usbcore: registered new interface driver idmouse [ 9.486013] initcall usb_idmouse_init+0x0/0x3a returned 0 after 11718 usecs [ 9.493011] calling usb_lcd_init+0x0/0x2f @ 1 [ 9.497066] usbcore: registered new interface driver usblcd [ 9.503013] initcall usb_lcd_init+0x0/0x2f returned 0 after 5859 usecs [ 9.509011] calling ld_usb_init+0x0/0x2f @ 1 [ 9.514049] usbcore: registered new interface driver ldusb [ 9.519013] initcall ld_usb_init+0x0/0x2f returned 0 after 5859 usecs [ 9.525011] calling usb_led_init+0x0/0x2f @ 1 [ 9.530066] usbcore: registered new interface driver usbled [ 9.535013] initcall usb_led_init+0x0/0x2f returned 0 after 4882 usecs [ 9.542011] calling usb_rio_init+0x0/0x2d @ 1 [ 9.546066] usbcore: registered new interface driver rio500 [ 9.552011] rio500: v1.1:USB Rio 500 driver [ 9.556011] initcall usb_rio_init+0x0/0x2d returned 0 after 9765 usecs [ 9.563011] calling usbtest_init+0x0/0x3b @ 1 [ 9.567066] usbcore: registered new interface driver usbtest [ 9.573013] initcall usbtest_init+0x0/0x3b returned 0 after 5859 usecs [ 9.579011] calling usb_sevseg_init+0x0/0x2f @ 1 [ 9.584066] usbcore: registered new interface driver usbsevseg [ 9.590013] initcall usb_sevseg_init+0x0/0x2f returned 0 after 5859 usecs [ 9.596011] calling i8042_init+0x0/0x33d @ 1 [ 9.601069] PNP: No PS/2 controller found. Probing ports directly. [ 9.609959] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 9.615015] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 9.620018] initcall i8042_init+0x0/0x33d returned 0 after 18554 usecs [ 9.627011] calling emu_init+0x0/0x16 @ 1 [ 9.631068] initcall emu_init+0x0/0x16 returned 0 after 0 usecs [ 9.637012] calling ns558_init+0x0/0x345 @ 1 [ 9.649862] initcall ns558_init+0x0/0x345 returned 0 after 8789 usecs [ 9.656011] calling mousedev_init+0x0/0x51 @ 1 [ 9.661095] mice: PS/2 mouse device common for all mice [ 9.666012] initcall mousedev_init+0x0/0x51 returned 0 after 4882 usecs [ 9.673011] calling joydev_init+0x0/0xf @ 1 [ 9.677012] initcall joydev_init+0x0/0xf returned 0 after 0 usecs [ 9.683010] calling evdev_init+0x0/0xf @ 1 [ 9.687011] initcall evdev_init+0x0/0xf returned 0 after 0 usecs [ 9.693010] calling atkbd_init+0x0/0x20 @ 1 [ 9.698070] initcall atkbd_init+0x0/0x20 returned 0 after 976 usecs [ 9.704012] calling lkkbd_init+0x0/0x16 @ 1 [ 9.708067] initcall lkkbd_init+0x0/0x16 returned 0 after 0 usecs [ 9.714011] calling xtkbd_init+0x0/0x16 @ 1 [ 9.718066] initcall xtkbd_init+0x0/0x16 returned 0 after 976 usecs [ 9.720213] input: AT Translated Set 2 keyboard as /class/input/input0 [ 9.731011] calling a3d_init+0x0/0x16 @ 1 [ 9.735069] initcall a3d_init+0x0/0x16 returned 0 after 0 usecs [ 9.741011] calling analog_init+0x0/0xcd @ 1 [ 9.746069] initcall analog_init+0x0/0xcd returned 0 after 0 usecs [ 9.752011] calling grip_init+0x0/0x16 @ 1 [ 9.756068] initcall grip_init+0x0/0x16 returned 0 after 0 usecs [ 9.762011] calling iforce_init+0x0/0x41 @ 1 [ 9.766067] usbcore: registered new interface driver iforce [ 9.772066] initcall iforce_init+0x0/0x41 returned 0 after 5859 usecs [ 9.778011] calling interact_init+0x0/0x16 @ 1 [ 9.783069] initcall interact_init+0x0/0x16 returned 0 after 0 usecs [ 9.789011] calling warrior_init+0x0/0x16 @ 1 [ 9.794067] initcall warrior_init+0x0/0x16 returned 0 after 0 usecs [ 9.800011] calling usb_xpad_init+0x0/0x2d @ 1 [ 9.805067] usbcore: registered new interface driver xpad [ 9.810011] xpad: X-Box pad driver [ 9.814011] initcall usb_xpad_init+0x0/0x2d returned 0 after 8789 usecs [ 9.820011] calling ads7846_init+0x0/0xf @ 1 [ 9.825066] initcall ads7846_init+0x0/0xf returned 0 after 0 usecs [ 9.831011] calling gunze_init+0x0/0x16 @ 1 [ 9.835066] initcall gunze_init+0x0/0x16 returned 0 after 0 usecs [ 9.841011] calling elo_init+0x0/0x16 @ 1 [ 9.845067] initcall elo_init+0x0/0x16 returned 0 after 0 usecs [ 9.851013] calling mk712_init+0x0/0x1b7 @ 1 [ 9.856012] mk712: device not present [ 9.859014] initcall mk712_init+0x0/0x1b7 returned -19 after 2929 usecs [ 9.866012] calling pm_init+0x0/0x16 @ 1 [ 9.870066] initcall pm_init+0x0/0x16 returned 0 after 0 usecs [ 9.876011] calling touchit213_init+0x0/0x16 @ 1 [ 9.880066] initcall touchit213_init+0x0/0x16 returned 0 after 0 usecs [ 9.887011] calling tr_init+0x0/0x16 @ 1 [ 9.891067] initcall tr_init+0x0/0x16 returned 0 after 0 usecs [ 9.897011] calling pcspkr_init+0x0/0xf @ 1 [ 9.901128] input: PC Speaker as /class/input/input1 [ 9.914108] initcall pcspkr_init+0x0/0xf returned 0 after 13671 usecs [ 9.921012] calling wb_module_init+0x0/0x256 @ 1 [ 9.926022] wistron_btns: System unknown [ 9.929011] initcall wb_module_init+0x0/0x256 returned -19 after 2929 usecs [ 9.936011] calling ati_remote_init+0x0/0x3c @ 1 [ 9.941072] usbcore: registered new interface driver ati_remote [ 9.947011] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control [ 9.953042] initcall ati_remote_init+0x0/0x3c returned 0 after 11718 usecs [ 9.959011] calling ati_remote2_init+0x0/0x3c @ 1 [ 9.964069] usbcore: registered new interface driver ati_remote2 [ 9.970012] ati_remote2: ATI/Philips USB RF remote driver 0.3 [ 9.976011] initcall ati_remote2_init+0x0/0x3c returned 0 after 11718 usecs [ 9.983011] calling powermate_init+0x0/0x16 @ 1 [ 9.988035] usbcore: registered new interface driver powermate [ 9.993013] initcall powermate_init+0x0/0x16 returned 0 after 5859 usecs [ 10.000020] calling cm109_init+0x0/0xdc @ 1 [ 10.004010] cm109: Keymap for Komunikate KIP1000 phone loaded [ 10.010069] usbcore: registered new interface driver cm109 [ 10.015020] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad [ 10.022011] initcall cm109_init+0x0/0xdc returned 0 after 17578 usecs [ 10.028011] calling uinput_init+0x0/0xf @ 1 [ 10.033072] initcall uinput_init+0x0/0xf returned 0 after 0 usecs [ 10.039011] calling ds1286_init+0x0/0xf @ 1 [ 10.043066] initcall ds1286_init+0x0/0xf returned 0 after 0 usecs [ 10.049011] calling ds1307_init+0x0/0x11 @ 1 [ 10.054067] i2c-core: driver [rtc-ds1307] registered [ 10.058012] initcall ds1307_init+0x0/0x11 returned 0 after 4882 usecs [ 10.065011] calling ds1390_init+0x0/0xf @ 1 [ 10.069067] initcall ds1390_init+0x0/0xf returned 0 after 0 usecs [ 10.075011] calling ds1511_rtc_init+0x0/0xf @ 1 [ 10.080067] initcall ds1511_rtc_init+0x0/0xf returned 0 after 0 usecs [ 10.086011] calling ds1553_init+0x0/0xf @ 1 [ 10.091066] initcall ds1553_init+0x0/0xf returned 0 after 0 usecs [ 10.097011] calling ds1672_init+0x0/0x11 @ 1 [ 10.101067] i2c-core: driver [rtc-ds1672] registered [ 10.106011] initcall ds1672_init+0x0/0x11 returned 0 after 4882 usecs [ 10.112011] calling ds3234_init+0x0/0xf @ 1 [ 10.117067] initcall ds3234_init+0x0/0xf returned 0 after 0 usecs [ 10.123013] calling m41t94_init+0x0/0xf @ 1 [ 10.127067] initcall m41t94_init+0x0/0xf returned 0 after 0 usecs [ 10.133011] calling m48t86_rtc_init+0x0/0xf @ 1 [ 10.138066] initcall m48t86_rtc_init+0x0/0xf returned 0 after 0 usecs [ 10.144011] calling bq4802_init+0x0/0xf @ 1 [ 10.148067] initcall bq4802_init+0x0/0xf returned 0 after 0 usecs [ 10.154011] calling max6900_init+0x0/0x11 @ 1 [ 10.159066] i2c-core: driver [rtc-max6900] registered [ 10.164011] initcall max6900_init+0x0/0x11 returned 0 after 4882 usecs [ 10.170011] calling max6902_init+0x0/0xf @ 1 [ 10.175067] initcall max6902_init+0x0/0xf returned 0 after 0 usecs [ 10.181011] calling pcf8583_init+0x0/0x11 @ 1 [ 10.185066] i2c-core: driver [pcf8583] registered [ 10.190012] initcall pcf8583_init+0x0/0x11 returned 0 after 4882 usecs [ 10.197011] calling rs5c372_init+0x0/0x11 @ 1 [ 10.201067] i2c-core: driver [rtc-rs5c372] registered [ 10.206012] initcall rs5c372_init+0x0/0x11 returned 0 after 4882 usecs [ 10.213011] calling twl4030_rtc_init+0x0/0xf @ 1 [ 10.217066] initcall twl4030_rtc_init+0x0/0xf returned 0 after 0 usecs [ 10.224011] calling i2c_ali1535_init+0x0/0x16 @ 1 [ 10.229067] initcall i2c_ali1535_init+0x0/0x16 returned 0 after 0 usecs [ 10.235011] calling i2c_sch_init+0x0/0x16 @ 1 [ 10.240065] initcall i2c_sch_init+0x0/0x16 returned 0 after 0 usecs [ 10.246011] calling nforce2_init+0x0/0x16 @ 1 [ 10.250156] i2c-adapter i2c-0: adapter [SMBus nForce2 adapter at 4c00] registered [ 10.251033] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 10.252078] i2c-adapter i2c-1: adapter [SMBus nForce2 adapter at 4c40] registered [ 10.253011] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 10.254072] initcall nforce2_init+0x0/0x16 returned 0 after 3906 usecs [ 10.261029] calling ocores_i2c_init+0x0/0xf @ 1 [ 10.265073] initcall ocores_i2c_init+0x0/0xf returned 0 after 0 usecs [ 10.272027] calling i2c_parport_init+0x0/0x12e @ 1 [ 10.276010] i2c-parport-light: adapter type unspecified [ 10.282011] initcall i2c_parport_init+0x0/0x12e returned -19 after 5859 usecs [ 10.289011] calling i2c_pca_pf_init+0x0/0xf @ 1 [ 10.293069] initcall i2c_pca_pf_init+0x0/0xf returned 0 after 976 usecs [ 10.300011] calling ds1682_init+0x0/0x11 @ 1 [ 10.304068] i2c-core: driver [ds1682] registered [ 10.309013] initcall ds1682_init+0x0/0x11 returned 0 after 4882 usecs [ 10.315017] calling max6875_init+0x0/0x11 @ 1 [ 10.320067] i2c-core: driver [max6875] registered [ 10.325020] initcall max6875_init+0x0/0x11 returned 0 after 4882 usecs [ 10.331013] calling pcf8575_init+0x0/0x11 @ 1 [ 10.336051] i2c-core: driver [pcf8575] registered [ 10.340019] initcall pcf8575_init+0x0/0x11 returned 0 after 4882 usecs [ 10.347015] calling w1_init+0x0/0x90 @ 1 [ 10.351010] Driver for 1-wire Dallas network protocol. [ 10.356082] initcall w1_init+0x0/0x90 returned 0 after 4882 usecs [ 10.362011] calling ds_init+0x0/0x40 @ 1 [ 10.366066] usbcore: registered new interface driver DS9490R [ 10.372013] initcall ds_init+0x0/0x40 returned 0 after 5859 usecs [ 10.378011] calling sensors_ds2482_init+0x0/0x11 @ 1 [ 10.383067] i2c-core: driver [ds2482] registered [ 10.387019] initcall sensors_ds2482_init+0x0/0x11 returned 0 after 3906 usecs [ 10.395011] calling w1_ds2760_init+0x0/0x23 @ 1 [ 10.399010] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 10.408012] initcall w1_ds2760_init+0x0/0x23 returned 0 after 8789 usecs [ 10.415011] calling w1_bq27000_init+0x0/0x1d @ 1 [ 10.419011] initcall w1_bq27000_init+0x0/0x1d returned 0 after 0 usecs [ 10.426011] calling pcwd_init_module+0x0/0x14 @ 1 [ 10.432035] initcall pcwd_init_module+0x0/0x14 returned -19 after 976 usecs [ 10.438012] calling acq_init+0x0/0x50 @ 1 [ 10.442010] WDT driver for Acquire single board computer initialising. [ 10.449072] acquirewdt: I/O address 0x0043 already in use [ 10.455019] acquirewdt: probe of acquirewdt failed with error -5 [ 10.460012] initcall acq_init+0x0/0x50 returned 0 after 17578 usecs [ 10.467011] calling advwdt_init+0x0/0x50 @ 1 [ 10.471010] WDT driver for Advantech single board computer initialising. [ 10.478105] advantechwdt: initialized. timeout=60 sec (nowayout=1) [ 10.484013] initcall advwdt_init+0x0/0x50 returned 0 after 12695 usecs [ 10.491042] calling alim7101_wdt_init+0x0/0x16d @ 1 [ 10.496010] alim7101_wdt: Steve Hill . [ 10.501016] alim7101_wdt: ALi M7101 PMU not present - WDT not set [ 10.507012] initcall alim7101_wdt_init+0x0/0x16d returned -16 after 10742 usecs [ 10.514012] initcall alim7101_wdt_init+0x0/0x16d returned with error code -16 [ 10.522011] calling wafwdt_init+0x0/0x147 @ 1 [ 10.526010] WDT driver for Wafer 5823 single board computer initialising. [ 10.533014] Wafer 5823 WDT: I/O address 0x0443 already in use [ 10.539014] initcall wafwdt_init+0x0/0x147 returned -5 after 12695 usecs [ 10.545012] initcall wafwdt_init+0x0/0x147 returned with error code -5 [ 10.552011] calling watchdog_init+0x0/0x23c @ 1 [ 10.556015] initcall watchdog_init+0x0/0x23c returned -19 after 0 usecs [ 10.563012] calling iTCO_wdt_init_module+0x0/0x56 @ 1 [ 10.568010] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 10.574079] iTCO_wdt: No card detected [ 10.578025] initcall iTCO_wdt_init_module+0x0/0x56 returned 0 after 9765 usecs [ 10.585012] calling iTCO_vendor_init_module+0x0/0x17 @ 1 [ 10.590010] iTCO_vendor_support: vendor-support=0 [ 10.595012] initcall iTCO_vendor_init_module+0x0/0x17 returned 0 after 4882 usecs [ 10.602012] calling it8712f_wdt_init+0x0/0x1a9 @ 1 [ 10.607043] it8712f_wdt: Found IT8712F chip revision 7 - using DogFood address 0x201 [ 10.615014] it8712f_wdt: disabling watchdog timer [ 10.620033] it8712f_wdt: cannot register miscdev on minor=130 (err=-16) [ 10.626014] initcall it8712f_wdt_init+0x0/0x1a9 returned -16 after 18554 usecs [ 10.633012] initcall it8712f_wdt_init+0x0/0x1a9 returned with error code -16 [ 10.640013] calling sc1200wdt_init+0x0/0x161 @ 1 [ 10.645010] sc1200wdt: build 20020303 [ 10.649068] sc1200wdt: io parameter must be specified [ 10.654067] initcall sc1200wdt_init+0x0/0x161 returned -22 after 8789 usecs [ 10.661023] initcall sc1200wdt_init+0x0/0x161 returned with error code -22 [ 10.668012] calling sch311x_wdt_init+0x0/0x136 @ 1 [ 10.673030] initcall sch311x_wdt_init+0x0/0x136 returned -19 after 0 usecs [ 10.679012] calling watchdog_init+0x0/0xa5 @ 1 [ 10.684012] epx_c3: cannot register miscdev on minor=130 (err=-16) [ 10.690014] initcall watchdog_init+0x0/0xa5 returned -16 after 5859 usecs [ 10.697012] initcall watchdog_init+0x0/0xa5 returned with error code -16 [ 10.704012] calling isdn_init+0x0/0x273 @ 1 [ 10.709198] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/none/1.1.2.2 [ 10.716014] initcall isdn_init+0x0/0x273 returned 0 after 7812 usecs [ 10.723012] calling divert_init+0x0/0x59 @ 1 [ 10.727029] dss1_divert module successfully installed [ 10.733012] initcall divert_init+0x0/0x59 returned 0 after 5859 usecs [ 10.739012] calling sc_init+0x0/0xed4 @ 1 [ 10.743011] SpellCaster ISA ISDN Adapter Driver rev. 2.0b1 [ 10.749010] Copyright (C) 1996 SpellCaster Telecommunications Inc. [ 10.755267] Failed to find any adapters, driver unloaded [ 10.761012] initcall sc_init+0x0/0xed4 returned -19 after 17578 usecs [ 10.767012] calling edac_init+0x0/0xa7 @ 1 [ 10.771010] EDAC MC: Ver: 2.1.0 Mar 18 2009 [ 10.776070] initcall edac_init+0x0/0xa7 returned 0 after 4882 usecs [ 10.782012] calling i82975x_init+0x0/0x85 @ 1 [ 10.787068] initcall i82975x_init+0x0/0x85 returned -19 after 976 usecs [ 10.793012] calling i82860_init+0x0/0x85 @ 1 [ 10.798079] initcall i82860_init+0x0/0x85 returned -19 after 976 usecs [ 10.804012] calling r82600_init+0x0/0x29 @ 1 [ 10.809070] initcall r82600_init+0x0/0x29 returned 0 after 0 usecs [ 10.815012] calling pci_eisa_init_module+0x0/0x16 @ 1 [ 10.820068] initcall pci_eisa_init_module+0x0/0x16 returned 0 after 0 usecs [ 10.827012] calling virtual_eisa_root_init+0x0/0x48 @ 1 [ 10.832068] EISA: Probing bus 0 at eisa.0 [ 10.836069] initcall virtual_eisa_root_init+0x0/0x48 returned -1 after 3906 usecs [ 10.844013] initcall virtual_eisa_root_init+0x0/0x48 returned with error code -1 [ 10.851012] calling cpufreq_stats_init+0x0/0x7a @ 1 [ 10.856013] initcall cpufreq_stats_init+0x0/0x7a returned 0 after 0 usecs [ 10.863012] calling cpufreq_gov_userspace_init+0x0/0xf @ 1 [ 10.868013] initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 0 usecs [ 10.876015] calling clevo_mail_led_init+0x0/0x7e @ 1 [ 10.881015] initcall clevo_mail_led_init+0x0/0x7e returned -19 after 0 usecs [ 10.888012] calling pca955x_leds_init+0x0/0x11 @ 1 [ 10.893068] i2c-core: driver [leds-pca955x] registered [ 10.898016] initcall pca955x_leds_init+0x0/0x11 returned 0 after 4882 usecs [ 10.905012] calling timer_trig_init+0x0/0xf @ 1 [ 10.909013] initcall timer_trig_init+0x0/0xf returned 0 after 0 usecs [ 10.916012] calling dcdrbu_init+0x0/0x105 @ 1 [ 10.920067] initcall dcdrbu_init+0x0/0x105 returned 0 after 0 usecs [ 10.926012] calling hifn_init+0x0/0x19 @ 1 [ 10.931011] HIFN supports only 32-bit addresses. [ 10.935012] initcall hifn_init+0x0/0x19 returned -22 after 3906 usecs [ 10.942012] initcall hifn_init+0x0/0x19 returned with error code -22 [ 10.948012] calling hid_init+0x0/0x3d @ 1 [ 10.952069] initcall hid_init+0x0/0x3d returned 0 after 0 usecs [ 10.958012] calling usb_mouse_init+0x0/0x2d @ 1 [ 10.963069] usbcore: registered new interface driver usbmouse [ 10.969012] usbmouse: v1.6:USB HID Boot Protocol mouse driver [ 10.974012] initcall usb_mouse_init+0x0/0x2d returned 0 after 10742 usecs [ 10.981012] calling virtio_pci_init+0x0/0x44 @ 1 [ 10.986068] initcall virtio_pci_init+0x0/0x44 returned 0 after 0 usecs [ 10.992013] calling flow_cache_init+0x0/0x13e @ 1 [ 10.997155] initcall flow_cache_init+0x0/0x13e returned 0 after 0 usecs [ 11.004012] calling llc_init+0x0/0x1b @ 1 [ 11.008014] initcall llc_init+0x0/0x1b returned 0 after 0 usecs [ 11.014012] calling snap_init+0x0/0x2a @ 1 [ 11.018014] initcall snap_init+0x0/0x2a returned 0 after 0 usecs [ 11.024012] calling rif_init+0x0/0x6b @ 1 [ 11.028038] initcall rif_init+0x0/0x6b returned 0 after 0 usecs [ 11.034012] calling blackhole_module_init+0x0/0xf @ 1 [ 11.039013] initcall blackhole_module_init+0x0/0xf returned 0 after 0 usecs [ 11.046012] calling gred_module_init+0x0/0xf @ 1 [ 11.051012] initcall gred_module_init+0x0/0xf returned 0 after 0 usecs [ 11.057012] calling multiq_module_init+0x0/0xf @ 1 [ 11.062013] initcall multiq_module_init+0x0/0xf returned 0 after 0 usecs [ 11.069012] calling init_rsvp+0x0/0xf @ 1 [ 11.073012] initcall init_rsvp+0x0/0xf returned 0 after 0 usecs [ 11.079012] calling init_tcindex+0x0/0xf @ 1 [ 11.083012] initcall init_tcindex+0x0/0xf returned 0 after 0 usecs [ 11.089012] calling nfnetlink_init+0x0/0x4f @ 1 [ 11.094011] Netfilter messages via NETLINK v0.30. [ 11.098022] initcall nfnetlink_init+0x0/0x4f returned 0 after 3906 usecs [ 11.105012] calling nfnetlink_log_init+0x0/0x8a @ 1 [ 11.110024] initcall nfnetlink_log_init+0x0/0x8a returned 0 after 0 usecs [ 11.117013] calling sysctl_ipv4_init+0x0/0x3f @ 1 [ 11.121321] initcall sysctl_ipv4_init+0x0/0x3f returned 0 after 976 usecs [ 11.128012] calling ah4_init+0x0/0x5a @ 1 [ 11.133014] initcall ah4_init+0x0/0x5a returned 0 after 0 usecs [ 11.138012] calling esp4_init+0x0/0x5a @ 1 [ 11.143013] initcall esp4_init+0x0/0x5a returned 0 after 0 usecs [ 11.149012] calling ipcomp4_init+0x0/0x5a @ 1 [ 11.153013] initcall ipcomp4_init+0x0/0x5a returned 0 after 0 usecs [ 11.159017] calling ipip_init+0x0/0x88 @ 1 [ 11.163014] initcall ipip_init+0x0/0x88 returned 0 after 0 usecs [ 11.169013] calling tunnel4_init+0x0/0x5a @ 1 [ 11.174013] initcall tunnel4_init+0x0/0x5a returned 0 after 0 usecs [ 11.180013] calling xfrm4_mode_tunnel_init+0x0/0x14 @ 1 [ 11.185013] initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 0 usecs [ 11.192014] calling ipv4_netfilter_init+0x0/0x20 @ 1 [ 11.197013] initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0 usecs [ 11.204013] calling inet_diag_init+0x0/0x82 @ 1 [ 11.209027] initcall inet_diag_init+0x0/0x82 returned 0 after 0 usecs [ 11.215013] calling tcp_diag_init+0x0/0xf @ 1 [ 11.220013] initcall tcp_diag_init+0x0/0xf returned 0 after 0 usecs [ 11.226012] calling hybla_register+0x0/0xf @ 1 [ 11.230012] TCP hybla registered [ 11.234013] initcall hybla_register+0x0/0xf returned 0 after 3906 usecs [ 11.240012] calling htcp_register+0x0/0xf @ 1 [ 11.245011] TCP htcp registered [ 11.248013] initcall htcp_register+0x0/0xf returned 0 after 2929 usecs [ 11.254013] calling tcp_vegas_register+0x0/0x11 @ 1 [ 11.259011] TCP vegas registered [ 11.262013] initcall tcp_vegas_register+0x0/0x11 returned 0 after 2929 usecs [ 11.269013] calling tcp_yeah_register+0x0/0x11 @ 1 [ 11.274011] TCP yeah registered [ 11.277013] initcall tcp_yeah_register+0x0/0x11 returned 0 after 2929 usecs [ 11.284013] calling packet_init+0x0/0x39 @ 1 [ 11.289013] NET: Registered protocol family 17 [ 11.293021] initcall packet_init+0x0/0x39 returned 0 after 3906 usecs [ 11.300013] calling ipsec_pfkey_init+0x0/0x70 @ 1 [ 11.304011] NET: Registered protocol family 15 [ 11.309033] initcall ipsec_pfkey_init+0x0/0x70 returned 0 after 4882 usecs [ 11.316013] calling br_init+0x0/0xae @ 1 [ 11.320151] initcall br_init+0x0/0xae returned 0 after 0 usecs [ 11.326013] calling dsa_init_module+0x0/0x11 @ 1 [ 11.330012] initcall dsa_init_module+0x0/0x11 returned 0 after 0 usecs [ 11.337012] calling trailer_init_module+0x0/0x11 @ 1 [ 11.342012] initcall trailer_init_module+0x0/0x11 returned 0 after 0 usecs [ 11.349012] calling mv88e6060_init+0x0/0x11 @ 1 [ 11.353012] initcall mv88e6060_init+0x0/0x11 returned 0 after 0 usecs [ 11.360012] calling mv88e6131_init+0x0/0x11 @ 1 [ 11.364012] initcall mv88e6131_init+0x0/0x11 returned 0 after 0 usecs [ 11.371012] calling dsa_init_module+0x0/0xf @ 1 [ 11.375069] initcall dsa_init_module+0x0/0xf returned 0 after 0 usecs [ 11.382012] calling ipx_init+0x0/0xd2 @ 1 [ 11.386129] NET: Registered protocol family 4 [ 11.394040] initcall ipx_init+0x0/0xd2 returned 0 after 7812 usecs [ 11.400012] calling atalk_init+0x0/0x77 @ 1 [ 11.405011] NET: Registered protocol family 5 [ 11.415051] initcall atalk_init+0x0/0x77 returned 0 after 9765 usecs [ 11.422013] calling x25_init+0x0/0x50 @ 1 [ 11.426011] NET: Registered protocol family 9 [ 11.430012] X.25 for Linux Version 0.2 [ 11.434050] initcall x25_init+0x0/0x50 returned 0 after 7812 usecs [ 11.440012] calling af_rxrpc_init+0x0/0x167 @ 1 [ 11.445138] NET: Registered protocol family 33 [ 11.449022] initcall af_rxrpc_init+0x0/0x167 returned 0 after 4882 usecs [ 11.456012] calling wimax_subsys_init+0x0/0x1d7 @ 1 [ 11.464041] initcall wimax_subsys_init+0x0/0x1d7 returned 0 after 2929 usecs [ 11.471013] calling update_mp_table+0x0/0x597 @ 1 [ 11.476013] initcall update_mp_table+0x0/0x597 returned 0 after 0 usecs [ 11.483013] calling lapic_insert_resource+0x0/0x45 @ 1 [ 11.488014] initcall lapic_insert_resource+0x0/0x45 returned 0 after 0 usecs [ 11.495012] calling print_ipi_mode+0x0/0x26 @ 1 [ 11.499011] Using IPI Shortcut mode [ 11.503012] initcall print_ipi_mode+0x0/0x26 returned 0 after 3906 usecs [ 11.510012] calling ioapic_insert_resources+0x0/0x42 @ 1 [ 11.515013] initcall ioapic_insert_resources+0x0/0x42 returned 0 after 0 usecs [ 11.522013] calling io_apic_bug_finalize+0x0/0x1a @ 1 [ 11.527013] initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 0 usecs [ 11.534013] calling check_early_ioremap_leak+0x0/0x5e @ 1 [ 11.540013] initcall check_early_ioremap_leak+0x0/0x5e returned 0 after 0 usecs [ 11.547013] calling pat_memtype_list_init+0x0/0x23 @ 1 [ 11.552023] initcall pat_memtype_list_init+0x0/0x23 returned 0 after 0 usecs [ 11.559015] calling init_oops_id+0x0/0x40 @ 1 [ 11.564013] initcall init_oops_id+0x0/0x40 returned 0 after 0 usecs [ 11.570013] calling disable_boot_consoles+0x0/0x36 @ 1 [ 11.575013] initcall disable_boot_consoles+0x0/0x36 returned 0 after 0 usecs [ 11.582013] calling pm_qos_power_init+0x0/0xae @ 1 [ 11.587154] initcall pm_qos_power_init+0x0/0xae returned 0 after 0 usecs [ 11.594013] calling debugfs_kprobe_init+0x0/0x80 @ 1 [ 11.599023] initcall debugfs_kprobe_init+0x0/0x80 returned 0 after 0 usecs [ 11.606013] calling clear_boot_tracer+0x0/0x27 @ 1 [ 11.611013] initcall clear_boot_tracer+0x0/0x27 returned 0 after 0 usecs [ 11.617013] calling afs_init+0x0/0x183 @ 1 [ 11.621011] kAFS: Red Hat AFS client v0.1 registering. [ 11.627197] initcall afs_init+0x0/0x183 returned 0 after 5859 usecs [ 11.633014] calling random32_reseed+0x0/0x83 @ 1 [ 11.638026] initcall random32_reseed+0x0/0x83 returned 0 after 0 usecs [ 11.644013] calling pci_sysfs_init+0x0/0x44 @ 1 [ 11.649178] initcall pci_sysfs_init+0x0/0x44 returned 0 after 0 usecs [ 11.655013] calling seqgen_init+0x0/0xe @ 1 [ 11.660027] initcall seqgen_init+0x0/0xe returned 0 after 0 usecs [ 11.666014] calling scsi_complete_async_scans+0x0/0x110 @ 1 [ 11.671016] initcall scsi_complete_async_scans+0x0/0x110 returned 0 after 0 usecs [ 11.679012] calling rtc_hctosys+0x0/0x11c @ 1 [ 11.683012] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 11.689013] initcall rtc_hctosys+0x0/0x11c returned -19 after 5859 usecs [ 11.696013] calling edd_init+0x0/0x2e3 @ 1 [ 11.701012] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 11.707011] EDD information not available. [ 11.711013] initcall edd_init+0x0/0x2e3 returned -19 after 9765 usecs [ 11.717012] calling memmap_init+0x0/0x8e @ 1 [ 11.722074] initcall memmap_init+0x0/0x8e returned 0 after 0 usecs [ 11.728013] calling tcp_congestion_default+0x0/0xf @ 1 [ 11.733014] initcall tcp_congestion_default+0x0/0xf returned 0 after 0 usecs [ 11.740013] calling ip_auto_config+0x0/0x835 @ 1 [ 11.745020] initcall ip_auto_config+0x0/0x835 returned 0 after 0 usecs [ 11.751043] async_waiting @ 1 [ 11.754012] async_continuing @ 1 after 0 usec [ 11.760078] EXT3-fs: INFO: recovery required on readonly filesystem. [ 11.766012] EXT3-fs: write access will be enabled during recovery. [ 11.808076] kjournald starting. Commit interval 5 seconds [ 11.808076] EXT3-fs: recovery complete. [ 11.808107] EXT3-fs: mounted filesystem with ordered data mode. [ 11.808107] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 11.808143] async_waiting @ 1 [ 11.808145] async_continuing @ 1 after 0 usec [ 11.808155] Freeing unused kernel memory: 424k freed [ 15.313101] EXT3 FS on sda1, internal journal [ 15.369046] kjournald starting. Commit interval 5 seconds [ 15.374092] EXT3 FS on sda5, internal journal [ 15.379016] EXT3-fs: mounted filesystem with ordered data mode. [ 16.970745] IPv4 FIB: Using LC-trie version 0.408 [ 17.288951] eth0: no link during initialization. [ 19.607061] eth0: link up.