[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.29-rc8-tip (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #20999 SMP Wed Mar 18 11:07:17 CET 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] console [earlyser0] enabled [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x1000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ d79000-f3a000 [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f5680] f5680 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] mpc: f1400-f152c [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Warning! Not a NUMA-Q system! [ 0.000000] NUMA - single node, flat memory mode [ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3fff0 [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 [ 0.000000] node 0 pfn: [0 - 3fff0] [ 0.000000] Reserving 3584 pages of KVA for lmem_map of node 0 at 3f000 [ 0.000000] remove_active_range (0, 258048, 261632) [ 0.000000] Reserving total of e00 pages for numa KVA remap [ 0.000000] kva_start_pfn ~ 36a00 max_low_pfn ~ 379fe [ 0.000000] max_pfn = 3fff0 [ 0.000000] 133MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] max_low_pfn = 379fe, highstart_pfn = 379fe [ 0.000000] Low memory ends at vaddr f79fe000 [ 0.000000] node 0 will remap to vaddr f6a00000 - f7800000 [ 0.000000] allocate_pgdat: node 0 NODE_DATA f6a00000 [ 0.000000] remap_numa_kva: node 0 [ 0.000000] remap_numa_kva: f6a00000 to pfn 0003f000 [ 0.000000] remap_numa_kva: f6c00000 to pfn 0003f200 [ 0.000000] remap_numa_kva: f6e00000 to pfn 0003f400 [ 0.000000] remap_numa_kva: f7000000 to pfn 0003f600 [ 0.000000] remap_numa_kva: f7200000 to pfn 0003f800 [ 0.000000] remap_numa_kva: f7400000 to pfn 0003fa00 [ 0.000000] remap_numa_kva: f7600000 to pfn 0003fc00 [ 0.000000] High memory starts at vaddr f79fe000 [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00007000 - 0000df40 [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 0000d2c7cc] TEXT DATA BSS ==> [0000100000 - 0000d2c7cc] [ 0.000000] #4 [0000d2d000 - 0000d79000] INIT_PG_TABLE ==> [0000d2d000 - 0000d79000] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [0000d79000 - 0000eea000] PGTABLE ==> [0000d79000 - 0000eea000] [ 0.000000] #7 [003f000000 - 003fe00000] KVA RAM [ 0.000000] #8 [0036a00000 - 0037800000] KVA PG ==> [0036a00000 - 0037800000] [ 0.000000] #9 [0000007000 - 000000e000] BOOTMAP ==> [0000007000 - 000000e000] [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f5680] f5680 [ 0.000000] mpc: f1400-f152c [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f000 [ 0.000000] 0: 0x0003fe00 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 258447 [ 0.000000] free_area_init_node: node 0, pgdat f6a00000, node_mem_map f6a02000 [ 0.000000] DMA zone: 52 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3947 pages, LIFO batch:0 [ 0.000000] Normal zone: 2841 pages used for memmap [ 0.000000] Normal zone: 220901 pages, LIFO batch:31 [ 0.000000] HighMem zone: 436 pages used for memmap [ 0.000000] HighMem zone: 30270 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] mpc: f1400-f152c [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Warning! Not a NUMA-Q system! [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Bus #0 is PCI [ 0.000000] Bus #1 is PCI [ 0.000000] Bus #2 is PCI [ 0.000000] Bus #3 is PCI [ 0.000000] Bus #4 is PCI [ 0.000000] Bus #5 is PCI [ 0.000000] Bus #6 is ISA [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05 [ 0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:16 [ 0.000000] PERCPU: Embedded 14 pages at c100d000, static data 33244 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255118 [ 0.000000] Policy zone: HighMem [ 0.000000] Kernel command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200,keep console=tty debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 [ 0.000000] debug: sysrq always enabled. [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2010.551 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.004000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.004000] ... MAX_LOCK_DEPTH: 48 [ 0.004000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.004000] ... CLASSHASH_SIZE: 4096 [ 0.004000] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.004000] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.004000] ... CHAINHASH_SIZE: 8192 [ 0.004000] memory used by lock dependency info: 2847 kB [ 0.004000] per task-struct memory footprint: 1152 bytes [ 0.004000] ------------------------ [ 0.004000] | Locking API testsuite: [ 0.004000] ---------------------------------------------------------------------------- [ 0.004000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] A-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.004000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.004000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] recursive read-lock: | ok | |failed| [ 0.004000] recursive read-lock #2: | ok | |failed| [ 0.004000] mixed read-write-lock: |failed| |failed| [ 0.004000] mixed write-read-lock: |failed| |failed| [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] hard-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.004000] soft-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.004000] hard-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.004000] soft-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.004000] sirq-safe-A => hirqs-on/12:failed|failed| ok | [ 0.004000] sirq-safe-A => hirqs-on/21:failed|failed| ok | [ 0.004000] hard-safe-A + irqs-on/12:failed|failed| ok | [ 0.004000] soft-safe-A + irqs-on/12:failed|failed| ok | [ 0.004000] hard-safe-A + irqs-on/21:failed|failed| ok | [ 0.004000] soft-safe-A + irqs-on/21:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.004000] hard-irq lock-inversion/123:failed|failed| ok | [ 0.004000] soft-irq lock-inversion/123:failed|failed| ok | [ 0.004000] hard-irq lock-inversion/132:failed|failed| ok | [ 0.004000] soft-irq lock-inversion/132:failed|failed| ok | [ 0.004000] hard-irq lock-inversion/213:failed|failed| ok | [ 0.004000] soft-irq lock-inversion/213:failed|failed| ok | [ 0.004000] hard-irq lock-inversion/231:failed|failed| ok | [ 0.004000] soft-irq lock-inversion/231:failed|failed| ok | [ 0.004000] hard-irq lock-inversion/312:failed|failed| ok | [ 0.004000] soft-irq lock-inversion/312:failed|failed| ok | [ 0.004000] hard-irq lock-inversion/321:failed|failed| ok | [ 0.004000] soft-irq lock-inversion/321:failed|failed| ok | [ 0.004000] hard-irq read-recursion/123: ok | [ 0.004000] soft-irq read-recursion/123: ok | [ 0.004000] hard-irq read-recursion/132: ok | [ 0.004000] soft-irq read-recursion/132: ok | [ 0.004000] hard-irq read-recursion/213: ok | [ 0.004000] soft-irq read-recursion/213: ok | [ 0.004000] hard-irq read-recursion/231: ok | [ 0.004000] soft-irq read-recursion/231: ok | [ 0.004000] hard-irq read-recursion/312: ok | [ 0.004000] soft-irq read-recursion/312: ok | [ 0.004000] hard-irq read-recursion/321: ok | [ 0.004000] soft-irq read-recursion/321: ok | [ 0.004000] -------------------------------------------------------- [ 0.004000] 133 out of 218 testcases failed, as expected. | [ 0.004000] ---------------------------------------------------- [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Initializing HighMem for node 0 (000379fe:0003fff0) [ 0.004000] Memory: 1004160k/1048512k available (4492k kernel code, 29624k reserved, 2527k data, 448k init, 122824k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffe17000 - 0xfffff000 (1952 kB) [ 0.004000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.004000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.004000] .init : 0xc07e3000 - 0xc0853000 ( 448 kB) [ 0.004000] .data : 0xc0563398 - 0xc07db2e0 (2527 kB) [ 0.004000] .text : 0xc0100000 - 0xc0563398 (4492 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=16 [ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 4021.10 BogoMIPS (lpj=8042204) [ 0.012084] Security Framework initialized [ 0.016048] Mount-cache hash table entries: 512 [ 0.020540] Initializing cgroup subsys debug [ 0.024005] Initializing cgroup subsys ns [ 0.028005] Initializing cgroup subsys cpuacct [ 0.032005] Initializing cgroup subsys freezer [ 0.036004] Initializing cgroup subsys net_cls [ 0.040048] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.044003] CPU: L2 Cache: 512K (64 bytes/line) [ 0.048003] CPU: Physical Processor ID: 0 [ 0.052003] CPU: Processor Core ID: 0 [ 0.056005] Intel machine check architecture supported. [ 0.060004] Intel machine check reporting enabled on CPU#0. [ 0.064025] Checking 'hlt' instruction... OK. [ 0.084764] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.088009] ftrace: allocating 22427 entries in 44 pages [ 0.100290] enabled ExtINT on CPU#0 [ 0.104053] ExtINT not setup in hardware but reported by MP table [ 0.108094] Mapping cpu 0 to node 0 [ 0.112003] ENABLING IO-APIC IRQs [ 0.116004] init IO_APIC IRQs [ 0.120003] 2-0 (apicid-pin) not connected [ 0.124020] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.128014] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.132013] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1) [ 0.136001] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.136001] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1) [ 0.136001] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.136001] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.136001] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.136001] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0) [ 0.136001] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.136001] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1) [ 0.136001] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.136001] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.136001] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.136001] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.136001] 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected [ 0.136001] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.136001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.136001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.136001] ..... (found apic 0 pin 0) ... [ 0.176356] ....... works. [ 0.178932] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.185213] Using local APIC timer interrupts. [ 0.185214] calibrating APIC timer ... [ 0.192001] ... lapic delta = 1256509 [ 0.192001] ..... delta 1256509 [ 0.192001] ..... mult: 53963277 [ 0.192001] ..... calibration result: 804165 [ 0.192001] ..... CPU clock speed is 2010.1657 MHz. [ 0.192001] ..... host bus clock speed is 201.0165 MHz. [ 0.192001] ... verify APIC timer [ 0.303453] ... jiffies delta = 25 [ 0.304002] ... jiffies result ok [ 0.308018] calling migration_init+0x0/0x4b @ 1 [ 0.312111] initcall migration_init+0x0/0x4b returned 1 after 0 usecs [ 0.316004] initcall migration_init+0x0/0x4b returned with error code 1 [ 0.320004] calling spawn_ksoftirqd+0x0/0x47 @ 1 [ 0.324065] initcall spawn_ksoftirqd+0x0/0x47 returned 0 after 0 usecs [ 0.328006] calling init_call_single_data+0x0/0x91 @ 1 [ 0.332008] initcall init_call_single_data+0x0/0x91 returned 0 after 0 usecs [ 0.336005] calling spawn_softlockup_task+0x0/0x5f @ 1 [ 0.340066] initcall spawn_softlockup_task+0x0/0x5f returned 0 after 0 usecs [ 0.344004] calling relay_init+0x0/0x11 @ 1 [ 0.348006] initcall relay_init+0x0/0x11 returned 0 after 0 usecs [ 0.352005] calling tracer_alloc_buffers+0x0/0x209 @ 1 [ 0.356086] Testing tracer nop: PASSED [ 0.360015] initcall tracer_alloc_buffers+0x0/0x209 returned 0 after 3906 usecs [ 0.364004] calling init_trace_printk+0x0/0xf @ 1 [ 0.368005] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs [ 0.372272] lockdep: fixing up alternatives. [ 0.376067] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] masked ExtINT on CPU#1 [ 0.004000] Mapping cpu 1 to node 0 [ 0.004000] Calibrating delay using timer specific routine.. 4020.86 BogoMIPS (lpj=8041731) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] Intel machine check architecture supported. [ 0.004000] Intel machine check reporting enabled on CPU#1. [ 0.468077] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.477250] Brought up 2 CPUs [ 0.480004] Total of 2 processors activated (8041.96 BogoMIPS). [ 0.484346] CPU0 attaching sched-domain: [ 0.488006] domain 0: span 0-1 level CPU [ 0.492003] groups: 0 1 [ 0.494599] domain 1: span 0-1 level NODE [ 0.497818] groups: 0-1 [ 0.500524] CPU1 attaching sched-domain: [ 0.504016] domain 0: span 0-1 level CPU [ 0.508003] groups: 1 0 [ 0.512003] domain 1: span 0-1 level NODE [ 0.516010] groups: 0-1 [ 0.518871] device: 'platform': device_add [ 0.520321] khelper used greatest stack depth: 7008 bytes left [ 0.528038] bus: 'platform': registered [ 0.532009] Registering sysdev class 'cpu' [ 0.536261] calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1 [ 0.540009] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs [ 0.544005] calling net_ns_init+0x0/0xe8 @ 1 [ 0.548011] net_namespace: 1196 bytes [ 0.552018] initcall net_ns_init+0x0/0xe8 returned 0 after 3906 usecs [ 0.556006] calling cpufreq_tsc+0x0/0x25 @ 1 [ 0.560005] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs [ 0.564004] calling reboot_init+0x0/0x11 @ 1 [ 0.568010] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs [ 0.572006] calling init_smp_flush+0x0/0x2f @ 1 [ 0.576006] initcall init_smp_flush+0x0/0x2f returned 0 after 0 usecs [ 0.580011] calling sysctl_init+0x0/0x29 @ 1 [ 0.584187] initcall sysctl_init+0x0/0x29 returned 0 after 0 usecs [ 0.588004] calling ksysfs_init+0x0/0x96 @ 1 [ 0.592109] initcall ksysfs_init+0x0/0x96 returned 0 after 0 usecs [ 0.596005] calling async_init+0x0/0x3c @ 1 [ 0.600005] initcall async_init+0x0/0x3c returned 0 after 0 usecs [ 0.604005] calling init_jiffies_clocksource+0x0/0xf @ 1 [ 0.612008] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs [ 0.616005] calling filelock_init+0x0/0x27 @ 1 [ 0.620011] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs [ 0.624004] calling init_script_binfmt+0x0/0xf @ 1 [ 0.628014] initcall init_script_binfmt+0x0/0xf returned 0 after 0 usecs [ 0.632004] calling init_elf_binfmt+0x0/0xf @ 1 [ 0.636005] initcall init_elf_binfmt+0x0/0xf returned 0 after 0 usecs [ 0.640005] calling debugfs_init+0x0/0x41 @ 1 [ 0.644018] initcall debugfs_init+0x0/0x41 returned 0 after 0 usecs [ 0.648005] calling securityfs_init+0x0/0x41 @ 1 [ 0.652010] initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs [ 0.656005] calling random32_init+0x0/0x9d @ 1 [ 0.660006] initcall random32_init+0x0/0x9d returned 0 after 0 usecs [ 0.664006] calling regulator_init+0x0/0x23 @ 1 [ 0.668004] regulator: core version 0.5 [ 0.672004] device class 'regulator': registering [ 0.676108] initcall regulator_init+0x0/0x23 returned 0 after 7812 usecs [ 0.680005] calling cpufreq_core_init+0x0/0x55 @ 1 [ 0.684006] initcall cpufreq_core_init+0x0/0x55 returned 0 after 0 usecs [ 0.688004] calling cpuidle_init+0x0/0x32 @ 1 [ 0.692012] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs [ 0.696005] calling sock_init+0x0/0x51 @ 1 [ 0.700088] initcall sock_init+0x0/0x51 returned 0 after 0 usecs [ 0.704006] calling netpoll_init+0x0/0x39 @ 1 [ 0.708012] initcall netpoll_init+0x0/0x39 returned 0 after 0 usecs [ 0.712005] calling netlink_proto_init+0x0/0x106 @ 1 [ 0.716047] NET: Registered protocol family 16 [ 0.720044] initcall netlink_proto_init+0x0/0x106 returned 0 after 3906 usecs [ 0.724004] calling olpc_init+0x0/0x105 @ 1 [ 0.728005] initcall olpc_init+0x0/0x105 returned 0 after 0 usecs [ 0.732006] calling bdi_class_init+0x0/0x35 @ 1 [ 0.736005] device class 'bdi': registering [ 0.740108] initcall bdi_class_init+0x0/0x35 returned 0 after 3906 usecs [ 0.744006] calling kobject_uevent_init+0x0/0x3f @ 1 [ 0.748013] initcall kobject_uevent_init+0x0/0x3f returned 0 after 0 usecs [ 0.752005] calling pcibus_class_init+0x0/0x14 @ 1 [ 0.756004] device class 'pci_bus': registering [ 0.760107] initcall pcibus_class_init+0x0/0x14 returned 0 after 3906 usecs [ 0.764006] calling pci_driver_init+0x0/0xf @ 1 [ 0.768107] bus: 'pci': registered [ 0.772007] initcall pci_driver_init+0x0/0xf returned 0 after 3906 usecs [ 0.776005] calling backlight_class_init+0x0/0x4d @ 1 [ 0.780005] device class 'backlight': registering [ 0.784106] initcall backlight_class_init+0x0/0x4d returned 0 after 3906 usecs [ 0.788006] calling video_output_class_init+0x0/0x14 @ 1 [ 0.792004] device class 'video_output': registering [ 0.796106] initcall video_output_class_init+0x0/0x14 returned 0 after 3906 usecs [ 0.800006] calling tty_class_init+0x0/0x2c @ 1 [ 0.804005] device class 'tty': registering [ 0.808106] initcall tty_class_init+0x0/0x2c returned 0 after 3906 usecs [ 0.812006] calling vtconsole_class_init+0x0/0xa1 @ 1 [ 0.816005] device class 'vtconsole': registering [ 0.820107] device: 'vtcon0': device_add [ 0.824109] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 7812 usecs [ 0.828005] calling register_node_type+0x0/0x3a @ 1 [ 0.832004] Registering sysdev class 'node' [ 0.836106] initcall register_node_type+0x0/0x3a returned 0 after 3906 usecs [ 0.840005] calling eisa_init+0x0/0x26 @ 1 [ 0.844106] bus: 'eisa': registered [ 0.848004] EISA bus registered [ 0.852005] initcall eisa_init+0x0/0x26 returned 0 after 7812 usecs [ 0.856005] calling amd_postcore_init+0x0/0xa2 @ 1 [ 0.860006] initcall amd_postcore_init+0x0/0xa2 returned 0 after 0 usecs [ 0.864005] calling arch_kdebugfs_init+0x0/0x28 @ 1 [ 0.868037] initcall arch_kdebugfs_init+0x0/0x28 returned 0 after 0 usecs [ 0.872005] calling init_pit_clocksource+0x0/0x97 @ 1 [ 0.876006] initcall init_pit_clocksource+0x0/0x97 returned 0 after 0 usecs [ 0.880006] calling kdump_buf_page_init+0x0/0x59 @ 1 [ 0.884023] initcall kdump_buf_page_init+0x0/0x59 returned 0 after 0 usecs [ 0.888005] calling init_cyclone_clocksource+0x0/0x17d @ 1 [ 0.892006] initcall init_cyclone_clocksource+0x0/0x17d returned -19 after 0 usecs [ 0.896005] calling pci_arch_init+0x0/0x33 @ 1 [ 0.908130] PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5 [ 0.912015] initcall pci_arch_init+0x0/0x33 returned 0 after 11718 usecs [ 0.916005] calling topology_init+0x0/0xb0 @ 1 [ 0.920005] Registering sys device of class 'node' [ 0.924009] Registering sys device 'node0' [ 0.928107] Registering sys device of class 'cpu' [ 0.932016] Registering sys device 'cpu0' [ 0.936064] Registering sys device of class 'cpu' [ 0.940009] Registering sys device 'cpu1' [ 0.948028] initcall topology_init+0x0/0xb0 returned 0 after 27343 usecs [ 0.952006] calling mca_init+0x0/0x2a2 @ 1 [ 0.956107] bus: 'MCA': registered [ 0.960007] initcall mca_init+0x0/0x2a2 returned -19 after 3906 usecs [ 0.964012] calling param_sysfs_init+0x0/0xb2 @ 1 [ 1.000173] initcall param_sysfs_init+0x0/0xb2 returned 0 after 31250 usecs [ 1.004153] calling pm_sysrq_init+0x0/0x1b @ 1 [ 1.008442] initcall pm_sysrq_init+0x0/0x1b returned 0 after 0 usecs [ 1.012007] calling readahead_init+0x0/0x2f @ 1 [ 1.016017] device: 'default': device_add [ 1.020143] initcall readahead_init+0x0/0x2f returned 0 after 3906 usecs [ 1.024007] calling init_bio+0x0/0xa9 @ 1 [ 1.028537] bio: create slab at 0 [ 1.032294] initcall init_bio+0x0/0xa9 returned 0 after 3906 usecs [ 1.036007] calling cryptomgr_init+0x0/0x29 @ 1 [ 1.040036] initcall cryptomgr_init+0x0/0x29 returned 0 after 0 usecs [ 1.044006] calling blk_settings_init+0x0/0x1d @ 1 [ 1.048006] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs [ 1.052005] calling blk_ioc_init+0x0/0x24 @ 1 [ 1.056011] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs [ 1.060006] calling blk_softirq_init+0x0/0x95 @ 1 [ 1.064008] initcall blk_softirq_init+0x0/0x95 returned 0 after 0 usecs [ 1.068006] calling genhd_device_init+0x0/0x50 @ 1 [ 1.072005] device class 'block': registering [ 1.076098] initcall genhd_device_init+0x0/0x50 returned 0 after 3906 usecs [ 1.080007] calling gpiolib_debugfs_init+0x0/0x1f @ 1 [ 1.084496] initcall gpiolib_debugfs_init+0x0/0x1f returned 0 after 0 usecs [ 1.088123] calling pci_slot_init+0x0/0x40 @ 1 [ 1.092023] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs [ 1.096006] calling pnp_init+0x0/0xf @ 1 [ 1.100114] bus: 'pnp': registered [ 1.104007] initcall pnp_init+0x0/0xf returned 0 after 3906 usecs [ 1.108180] calling misc_init+0x0/0x84 @ 1 [ 1.112032] device class 'misc': registering [ 1.116116] initcall misc_init+0x0/0x84 returned 0 after 3906 usecs [ 1.120006] calling phy_init+0x0/0x29 @ 1 [ 1.124091] device class 'mdio_bus': registering [ 1.128113] bus: 'mdio_bus': registered [ 1.132006] bus: 'mdio_bus': add driver Generic PHY [ 1.136109] initcall phy_init+0x0/0x29 returned 0 after 11718 usecs [ 1.140007] calling init_scsi+0x0/0x89 @ 1 [ 1.144380] device class 'scsi_host': registering [ 1.148115] bus: 'scsi': registered [ 1.152005] device class 'scsi_device': registering [ 1.156108] SCSI subsystem initialized [ 1.160007] initcall init_scsi+0x0/0x89 returned 0 after 15625 usecs [ 1.164006] calling ata_init+0x0/0x81 @ 1 [ 1.172059] libata version 3.00 loaded. [ 1.175724] initcall ata_init+0x0/0x81 returned 0 after 3906 usecs [ 1.176006] calling usb_init+0x0/0xf6 @ 1 [ 1.180110] bus: 'usb': registered [ 1.184007] device class 'usb_host': registering [ 1.188108] bus: 'usb': add driver usbfs [ 1.192109] usbcore: registered new interface driver usbfs [ 1.196020] bus: 'usb': add driver hub [ 1.200108] usbcore: registered new interface driver hub [ 1.204056] bus: 'usb': add driver usb [ 1.208108] usbcore: registered new device driver usb [ 1.212008] initcall usb_init+0x0/0xf6 returned 0 after 31250 usecs [ 1.216006] calling serio_init+0x0/0x73 @ 1 [ 1.220109] bus: 'serio': registered [ 1.223552] initcall serio_init+0x0/0x73 returned 0 after 0 usecs [ 1.224006] calling gameport_init+0x0/0x73 @ 1 [ 1.228109] bus: 'gameport': registered [ 1.232054] initcall gameport_init+0x0/0x73 returned 0 after 3906 usecs [ 1.236006] calling input_init+0x0/0xe2 @ 1 [ 1.240005] device class 'input': registering [ 1.244109] initcall input_init+0x0/0xe2 returned 0 after 3906 usecs [ 1.248007] calling rtc_init+0x0/0x5e @ 1 [ 1.252006] device class 'rtc': registering [ 1.260132] initcall rtc_init+0x0/0x5e returned 0 after 7812 usecs [ 1.264006] calling power_supply_class_init+0x0/0x2f @ 1 [ 1.268006] device class 'power_supply': registering [ 1.272110] initcall power_supply_class_init+0x0/0x2f returned 0 after 3906 usecs [ 1.276007] calling pci_subsys_init+0x0/0x1b @ 1 [ 1.280005] PCI: Probing PCI hardware [ 1.284021] PCI: Probing PCI hardware (bus 00) [ 1.288014] device: 'pci0000:00': device_add [ 1.292014] device: '0000:00': device_add [ 1.296110] PCI: Scanning bus 0000:00 [ 1.300133] pci 0000:00:00.0: found [10de:005e] class 000580 header type 00 [ 1.308064] pci 0000:00:01.0: found [10de:0050] class 000601 header type 00 [ 1.312138] pci 0000:00:01.0: calling nvidia_force_enable_hpet+0x0/0xa5 [ 1.316005] HPET not enabled in BIOS. You might try hpet=force boot option [ 1.320095] pci 0000:00:01.1: found [10de:0052] class 000c05 header type 00 [ 1.324031] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f] [ 1.328072] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f] [ 1.332022] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f] [ 1.336083] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 1.340015] pci 0000:00:01.1: PME# disabled [ 1.344123] pci 0000:00:02.0: found [10de:005a] class 000c03 header type 00 [ 1.348031] pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff] [ 1.352165] pci 0000:00:02.0: supports D1 D2 [ 1.356005] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.360015] pci 0000:00:02.0: PME# disabled [ 1.364121] pci 0000:00:02.1: found [10de:005b] class 000c03 header type 00 [ 1.368031] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 1.372192] pci 0000:00:02.1: supports D1 D2 [ 1.376005] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.380015] pci 0000:00:02.1: PME# disabled [ 1.384136] pci 0000:00:04.0: found [10de:0059] class 000401 header type 00 [ 1.388031] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff] [ 1.392022] pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff] [ 1.396022] pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff] [ 1.400132] pci 0000:00:04.0: supports D1 D2 [ 1.404099] pci 0000:00:06.0: found [10de:0053] class 000101 header type 00 [ 1.408093] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 1.412165] pci 0000:00:09.0: found [10de:005c] class 000604 header type 01 [ 1.416150] pci 0000:00:0a.0: found [10de:0057] class 000680 header type 00 [ 1.420031] pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff] [ 1.424022] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007] [ 1.428149] pci 0000:00:0a.0: supports D1 D2 [ 1.432005] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.436015] pci 0000:00:0a.0: PME# disabled [ 1.440124] pci 0000:00:0b.0: found [10de:005d] class 000604 header type 01 [ 1.444165] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.448015] pci 0000:00:0b.0: PME# disabled [ 1.452148] pci 0000:00:0c.0: found [10de:005d] class 000604 header type 01 [ 1.460094] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.464015] pci 0000:00:0c.0: PME# disabled [ 1.468148] pci 0000:00:0d.0: found [10de:005d] class 000604 header type 01 [ 1.472156] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.476022] pci 0000:00:0d.0: PME# disabled [ 1.480148] pci 0000:00:0e.0: found [10de:005d] class 000604 header type 01 [ 1.484157] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.488015] pci 0000:00:0e.0: PME# disabled [ 1.492187] pci 0000:00:18.0: found [1022:1100] class 000600 header type 00 [ 1.496232] pci 0000:00:18.1: found [1022:1101] class 000600 header type 00 [ 1.500182] pci 0000:00:18.2: found [1022:1102] class 000600 header type 00 [ 1.504182] pci 0000:00:18.3: found [1022:1103] class 000600 header type 00 [ 1.508198] PCI: Fixups for bus 0000:00 [ 1.512011] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 0 [ 1.516020] PCI: Scanning bus 0000:05 [ 1.520113] pci 0000:05:07.0: found [10ec:8139] class 000200 header type 00 [ 1.524033] pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff] [ 1.528024] pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff] [ 1.532157] pci 0000:05:07.0: supports D1 D2 [ 1.536006] pci 0000:05:07.0: PME# supported from D1 D2 D3hot [ 1.540016] pci 0000:05:07.0: PME# disabled [ 1.544133] PCI: Fixups for bus 0000:05 [ 1.548006] pci 0000:00:09.0: transparent bridge [ 1.552014] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff] [ 1.556015] pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff] [ 1.560014] PCI: Bus scan for 0000:05 returning with max=05 [ 1.564016] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 0 [ 1.568019] PCI: Scanning bus 0000:04 [ 1.572152] PCI: Fixups for bus 0000:04 [ 1.576048] PCI: Bus scan for 0000:04 returning with max=04 [ 1.580016] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 0 [ 1.584019] PCI: Scanning bus 0000:03 [ 1.588152] PCI: Fixups for bus 0000:03 [ 1.592047] PCI: Bus scan for 0000:03 returning with max=03 [ 1.596016] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 0 [ 1.600019] PCI: Scanning bus 0000:02 [ 1.604152] PCI: Fixups for bus 0000:02 [ 1.608047] PCI: Bus scan for 0000:02 returning with max=02 [ 1.612016] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 0 [ 1.612008] Clocksource tsc unstable (delta = 161446081 ns) [ 1.616020] PCI: Scanning bus 0000:01 [ 1.620076] pci 0000:01:00.0: found [1002:5b60] class 000300 header type 00 [ 1.624008] pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x21 [ 1.628033] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 1.632024] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff] [ 1.636024] pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff] [ 1.640076] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 1.644091] pci 0000:01:00.0: supports D1 D2 [ 1.648111] pci 0000:01:00.1: found [1002:5b70] class 000380 header type 00 [ 1.652007] pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x21 [ 1.656028] pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff] [ 1.660184] pci 0000:01:00.1: supports D1 D2 [ 1.664199] PCI: Fixups for bus 0000:01 [ 1.668023] pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff] [ 1.672015] pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff] [ 1.676023] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff] [ 1.680006] PCI: Bus scan for 0000:01 returning with max=01 [ 1.684016] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 1 [ 1.688026] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 1 [ 1.692026] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 1 [ 1.696026] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 1 [ 1.700033] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 1 [ 1.704021] PCI: Bus scan for 0000:00 returning with max=05 [ 1.708006] device: '0000:00:00.0': device_add [ 1.712013] bus: 'pci': add device 0000:00:00.0 [ 1.716117] device: '0000:00:01.0': device_add [ 1.720013] bus: 'pci': add device 0000:00:01.0 [ 1.724109] device: '0000:00:01.1': device_add [ 1.728013] bus: 'pci': add device 0000:00:01.1 [ 1.732108] device: '0000:00:02.0': device_add [ 1.736012] bus: 'pci': add device 0000:00:02.0 [ 1.740109] device: '0000:00:02.1': device_add [ 1.744013] bus: 'pci': add device 0000:00:02.1 [ 1.748108] device: '0000:00:04.0': device_add [ 1.752013] bus: 'pci': add device 0000:00:04.0 [ 1.756110] device: '0000:00:06.0': device_add [ 1.760013] bus: 'pci': add device 0000:00:06.0 [ 1.768021] device: '0000:00:09.0': device_add [ 1.772012] bus: 'pci': add device 0000:00:09.0 [ 1.776109] device: '0000:00:0a.0': device_add [ 1.780013] bus: 'pci': add device 0000:00:0a.0 [ 1.784108] device: '0000:00:0b.0': device_add [ 1.788013] bus: 'pci': add device 0000:00:0b.0 [ 1.792109] device: '0000:00:0c.0': device_add [ 1.796013] bus: 'pci': add device 0000:00:0c.0 [ 1.804111] device: '0000:00:0d.0': device_add [ 1.808013] bus: 'pci': add device 0000:00:0d.0 [ 1.812109] device: '0000:00:0e.0': device_add [ 1.816013] bus: 'pci': add device 0000:00:0e.0 [ 1.820108] device: '0000:00:18.0': device_add [ 1.824013] bus: 'pci': add device 0000:00:18.0 [ 1.828107] device: '0000:00:18.1': device_add [ 1.832013] bus: 'pci': add device 0000:00:18.1 [ 1.836108] device: '0000:00:18.2': device_add [ 1.840013] bus: 'pci': add device 0000:00:18.2 [ 1.844109] device: '0000:00:18.3': device_add [ 1.848013] bus: 'pci': add device 0000:00:18.3 [ 1.852108] device: '0000:05:07.0': device_add [ 1.856013] bus: 'pci': add device 0000:05:07.0 [ 1.860109] device: '0000:05': device_add [ 1.864111] device: '0000:04': device_add [ 1.868108] device: '0000:03': device_add [ 1.872112] device: '0000:02': device_add [ 1.876110] device: '0000:01:00.0': device_add [ 1.880013] bus: 'pci': add device 0000:01:00.0 [ 1.884109] device: '0000:01:00.1': device_add [ 1.888013] bus: 'pci': add device 0000:01:00.1 [ 1.892109] device: '0000:01': device_add [ 1.896309] pci 0000:00:00.0: default IRQ router [10de:005e] [ 1.900141] pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 3 [ 1.904029] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 1.908074] pci 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 1.912014] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 5 [ 1.916347] initcall pci_subsys_init+0x0/0x1b returned 0 after 621094 usecs [ 1.920007] calling proto_init+0x0/0xf @ 1 [ 1.924014] initcall proto_init+0x0/0xf returned 0 after 0 usecs [ 1.928007] calling net_dev_init+0x0/0x185 @ 1 [ 1.932026] device class 'net': registering [ 1.936108] device: 'lo': device_add [ 1.940140] initcall net_dev_init+0x0/0x185 returned 0 after 7812 usecs [ 1.944008] calling neigh_init+0x0/0x66 @ 1 [ 1.948008] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs [ 1.952007] calling fib_rules_init+0x0/0x99 @ 1 [ 1.956015] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs [ 1.960007] calling pktsched_init+0x0/0xa9 @ 1 [ 1.964030] initcall pktsched_init+0x0/0xa9 returned 0 after 0 usecs [ 1.968007] calling tc_filter_init+0x0/0x43 @ 1 [ 1.972008] initcall tc_filter_init+0x0/0x43 returned 0 after 0 usecs [ 1.976007] calling tc_action_init+0x0/0x43 @ 1 [ 1.980008] initcall tc_action_init+0x0/0x43 returned 0 after 0 usecs [ 1.984007] calling genl_init+0x0/0xb0 @ 1 [ 2.004048] initcall genl_init+0x0/0xb0 returned 0 after 15625 usecs [ 2.008008] calling cipso_v4_init+0x0/0x6d @ 1 [ 2.012023] initcall cipso_v4_init+0x0/0x6d returned 0 after 0 usecs [ 2.016007] calling atm_init+0x0/0xa0 @ 1 [ 2.020008] NET: Registered protocol family 8 [ 2.024006] NET: Registered protocol family 20 [ 2.028028] device class 'atm': registering [ 2.032109] initcall atm_init+0x0/0xa0 returned 0 after 11718 usecs [ 2.036008] calling wireless_nlevent_init+0x0/0x39 @ 1 [ 2.040008] initcall wireless_nlevent_init+0x0/0x39 returned 0 after 0 usecs [ 2.044009] calling cfg80211_init+0x0/0x69 @ 1 [ 2.048006] device class 'ieee80211': registering [ 2.068059] Registering platform device 'regulatory.0'. Parent at platform [ 2.072007] device: 'regulatory.0': device_add [ 2.076012] bus: 'platform': add device regulatory.0 [ 2.080109] cfg80211: Using static regulatory domain info [ 2.084007] cfg80211: Regulatory domain: US [ 2.088006] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2.092007] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 2.096007] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 2.100007] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 2.104007] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 2.108007] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 2.112007] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 2.116008] cfg80211: Calling CRDA for country: US [ 2.120109] initcall cfg80211_init+0x0/0x69 returned 0 after 70312 usecs [ 2.124008] calling netlbl_init+0x0/0x6d @ 1 [ 2.128006] NetLabel: Initializing [ 2.132006] NetLabel: domain hash size = 128 [ 2.136006] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.140165] NetLabel: unlabeled traffic allowed by default [ 2.144008] initcall netlbl_init+0x0/0x6d returned 0 after 15625 usecs [ 2.148007] calling sysctl_init+0x0/0x3b @ 1 [ 2.152009] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs [ 2.156009] calling pci_iommu_init+0x0/0x20 @ 1 [ 2.195584] DMA-API: preallocated 32768 debug entries [ 2.196008] DMA-API: debugging enabled by kernel config [ 2.200014] initcall pci_iommu_init+0x0/0x20 returned 0 after 39062 usecs [ 2.204010] calling print_all_ICs+0x0/0x5a @ 1 [ 2.208007] [ 2.208008] printing PIC contents [ 2.212018] ... PIC IMR: fffa [ 2.215037] ... PIC IRR: 0001 [ 2.216006] ... PIC ISR: 0001 [ 2.220007] ... PIC ELCR: 0828 [ 2.224008] [ 2.224009] printing local APIC contents on CPU#0/0: [ 2.228005] ... APIC ID: 00000000 (0) [ 2.228005] ... APIC VERSION: 00040010 [ 2.228005] ... APIC TASKPRI: 00000000 (00) [ 2.228005] ... APIC ARBPRI: 000000e0 (e0) [ 2.228005] ... APIC PROCPRI: 00000000 [ 2.228005] ... APIC LDR: 01000000 [ 2.228005] ... APIC DFR: ffffffff [ 2.228005] ... APIC SPIV: 000001ff [ 2.228005] ... APIC ISR field: [ 2.228005] 0123456789abcdef0123456789abcdef [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] ... APIC TMR field: [ 2.228005] 0123456789abcdef0123456789abcdef [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] ... APIC IRR field: [ 2.228005] 0123456789abcdef0123456789abcdef [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000000000000000000000 [ 2.228005] 00000000000000010000000000000000 [ 2.228005] ... APIC ESR: 00000000 [ 2.228005] ... APIC ICR: 000008fd [ 2.228005] ... APIC ICR2: 02000000 [ 2.228005] ... APIC LVTT: 000200ef [ 2.228005] ... APIC LVTPC: 00010000 [ 2.228005] ... APIC LVT0: 00010700 [ 2.228005] ... APIC LVT1: 00000400 [ 2.228005] ... APIC LVTERR: 000000fe [ 2.228005] ... APIC TMICT: 0000c454 [ 2.228005] ... APIC TMCCT: 000072a5 [ 2.228005] ... APIC TDCR: 00000003 [ 2.228005] [ 2.228008] [ 2.228009] printing local APIC contents on CPU#1/1: [ 2.232005] ... APIC ID: 01000000 (1) [ 2.232005] ... APIC VERSION: 00040010 [ 2.232005] ... APIC TASKPRI: 00000000 (00) [ 2.232005] ... APIC ARBPRI: 000000e0 (e0) [ 2.232005] ... APIC PROCPRI: 00000000 [ 2.232005] ... APIC LDR: 02000000 [ 2.232005] ... APIC DFR: ffffffff [ 2.232005] ... APIC SPIV: 000001ff [ 2.232005] ... APIC ISR field: [ 2.232005] 0123456789abcdef0123456789abcdef [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] ... APIC TMR field: [ 2.232005] 0123456789abcdef0123456789abcdef [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] ... APIC IRR field: [ 2.232005] 0123456789abcdef0123456789abcdef [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000000000000000000000 [ 2.232005] 00000000000000010000000000000000 [ 2.232005] ... APIC ESR: 00000000 [ 2.232005] ... APIC ICR: 000008fd [ 2.232005] ... APIC ICR2: 01000000 [ 2.232005] ... APIC LVTT: 000200ef [ 2.232005] ... APIC LVTPC: 00010000 [ 2.232005] ... APIC LVT0: 00010700 [ 2.232005] ... APIC LVT1: 00010400 [ 2.232005] ... APIC LVTERR: 000000fe [ 2.232005] ... APIC TMICT: 0000c454 [ 2.232005] ... APIC TMCCT: 000023f8 [ 2.232005] ... APIC TDCR: 00000003 [ 2.232005] [ 2.430966] number of MP IRQ sources: 17. [ 2.432007] number of IO-APIC #2 registers: 24. [ 2.436007] testing the IO APIC....................... [ 2.440010] [ 2.441475] IO APIC #2...... [ 2.444007] .... register #00: 00000000 [ 2.448007] ....... : physical APIC id: 00 [ 2.452007] ....... : Delivery Type: 0 [ 2.456007] ....... : LTS : 0 [ 2.460007] .... register #01: 00170011 [ 2.464007] ....... : max redirection entries: 0017 [ 2.468012] ....... : PRQ implemented: 0 [ 2.472007] ....... : IO APIC version: 0011 [ 2.476007] .... register #02: 00000000 [ 2.480007] ....... : arbitration: 00 [ 2.484007] .... IRQ redirection table: [ 2.488007] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 2.492009] 00 003 0 0 0 0 0 1 1 30 [ 2.496009] 01 003 0 0 0 0 0 1 1 31 [ 2.500014] 02 000 1 0 0 0 0 0 0 00 [ 2.507211] 03 003 1 1 0 1 0 1 1 33 [ 2.512009] 04 003 0 0 0 0 0 1 1 34 [ 2.516009] 05 003 1 1 0 1 0 1 1 35 [ 2.523210] 06 003 0 0 0 0 0 1 1 36 [ 2.528009] 07 003 1 0 0 0 0 1 1 37 [ 2.532009] 08 003 0 0 0 0 0 1 1 38 [ 2.536009] 09 003 0 0 0 0 0 1 1 39 [ 2.544009] 0a 003 0 0 0 0 0 1 1 3A [ 2.548009] 0b 003 1 1 0 1 0 1 1 3B [ 2.552009] 0c 003 0 0 0 0 0 1 1 3C [ 2.559210] 0d 003 0 0 0 0 0 1 1 3D [ 2.564009] 0e 003 0 0 0 0 0 1 1 3E [ 2.568009] 0f 003 0 0 0 0 0 1 1 3F [ 2.575210] 10 000 1 0 0 0 0 0 0 00 [ 2.580009] 11 000 1 0 0 0 0 0 0 00 [ 2.584009] 12 000 1 0 0 0 0 0 0 00 [ 2.588009] 13 000 1 0 0 0 0 0 0 00 [ 2.596009] 14 000 1 0 0 0 0 0 0 00 [ 2.600009] 15 000 1 0 0 0 0 0 0 00 [ 2.604009] 16 000 1 0 0 0 0 0 0 00 [ 2.611210] 17 000 1 0 0 0 0 0 0 00 [ 2.616007] IRQ to pin mappings: [ 2.620008] IRQ0 -> 0:0 [ 2.622429] IRQ1 -> 0:1 [ 2.624698] IRQ3 -> 0:3 [ 2.627122] IRQ4 -> 0:4 [ 2.628697] IRQ5 -> 0:5 [ 2.632178] IRQ6 -> 0:6 [ 2.634603] IRQ7 -> 0:7 [ 2.636697] IRQ8 -> 0:8 [ 2.639122] IRQ9 -> 0:9 [ 2.640697] IRQ10 -> 0:10 [ 2.644177] IRQ11 -> 0:11 [ 2.646775] IRQ12 -> 0:12 [ 2.648784] IRQ13 -> 0:13 [ 2.652178] IRQ14 -> 0:14 [ 2.654776] IRQ15 -> 0:15 [ 2.656787] .................................... done. [ 2.660010] initcall print_all_ICs+0x0/0x5a returned 0 after 441407 usecs [ 2.664008] calling hpet_late_init+0x0/0xda @ 1 [ 2.668009] initcall hpet_late_init+0x0/0xda returned -19 after 0 usecs [ 2.672010] calling clocksource_done_booting+0x0/0x11 @ 1 [ 2.676009] initcall clocksource_done_booting+0x0/0x11 returned 0 after 0 usecs [ 2.680009] calling ftrace_init_debugfs+0x0/0x44 @ 1 [ 2.684054] initcall ftrace_init_debugfs+0x0/0x44 returned 0 after 0 usecs [ 2.688009] calling rb_init_debugfs+0x0/0x38 @ 1 [ 2.692032] initcall rb_init_debugfs+0x0/0x38 returned 0 after 0 usecs [ 2.696009] calling tracer_init_debugfs+0x0/0x2ad @ 1 [ 2.700322] initcall tracer_init_debugfs+0x0/0x2ad returned 0 after 0 usecs [ 2.704009] calling init_trace_printk_function_export+0x0/0x39 @ 1 [ 2.708016] initcall init_trace_printk_function_export+0x0/0x39 returned 0 after 0 usecs [ 2.712009] calling event_trace_init+0x0/0xd7 @ 1 [ 2.720386] initcall event_trace_init+0x0/0xd7 returned 0 after 3906 usecs [ 2.724015] calling init_pipe_fs+0x0/0x3d @ 1 [ 2.728055] initcall init_pipe_fs+0x0/0x3d returned 0 after 0 usecs [ 2.732009] calling init_mnt_writers+0x0/0x65 @ 1 [ 2.736010] initcall init_mnt_writers+0x0/0x65 returned 0 after 0 usecs [ 2.740009] calling anon_inode_init+0x0/0xe3 @ 1 [ 2.744040] initcall anon_inode_init+0x0/0xe3 returned 0 after 0 usecs [ 2.748011] calling pnpbios_init+0x0/0x90 @ 1 [ 2.752010] PnPBIOS: Scanning system for PnP BIOS support... [ 2.756235] PnPBIOS: Found PnP BIOS installation structure at 0xc00fc550 [ 2.760011] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc580, dseg 0xf0000 [ 2.764034] device: 'pnp0': device_add [ 2.768047] device: '00:00': device_add [ 2.771821] bus: 'pnp': add device 00:00 [ 2.772116] device: '00:01': device_add [ 2.776015] bus: 'pnp': add device 00:01 [ 2.780111] device: '00:02': device_add [ 2.784014] bus: 'pnp': add device 00:02 [ 2.788112] device: '00:03': device_add [ 2.792014] bus: 'pnp': add device 00:03 [ 2.796109] device: '00:04': device_add [ 2.800017] bus: 'pnp': add device 00:04 [ 2.804112] device: '00:05': device_add [ 2.808017] bus: 'pnp': add device 00:05 [ 2.812112] device: '00:06': device_add [ 2.816014] bus: 'pnp': add device 00:06 [ 2.820137] device: '00:07': device_add [ 2.824015] bus: 'pnp': add device 00:07 [ 2.828121] device: '00:08': device_add [ 2.832015] bus: 'pnp': add device 00:08 [ 2.836112] device: '00:09': device_add [ 2.840015] bus: 'pnp': add device 00:09 [ 2.844127] device: '00:0b': device_add [ 2.848015] bus: 'pnp': add device 00:0b [ 2.852112] device: '00:0c': device_add [ 2.856015] bus: 'pnp': add device 00:0c [ 2.860159] device: '00:0e': device_add [ 2.864015] bus: 'pnp': add device 00:0e [ 2.868121] device: '00:0f': device_add [ 2.872015] bus: 'pnp': add device 00:0f [ 2.876119] device: '00:10': device_add [ 2.880015] bus: 'pnp': add device 00:10 [ 2.884112] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver [ 2.888011] initcall pnpbios_init+0x0/0x90 returned 0 after 132812 usecs [ 2.892010] calling pnp_system_init+0x0/0xf @ 1 [ 2.896009] bus: 'pnp': add driver system [ 2.900019] bus: 'pnp': driver_probe_device: matched device 00:07 with driver system [ 2.904009] bus: 'pnp': really_probe: probing driver system with device 00:07 [ 2.908034] system 00:07: iomem range 0x0-0x9ffff could not be reserved [ 2.912012] system 00:07: iomem range 0xfffffffffffe0000-0xffffffffffffffff has been reserved [ 2.916011] system 00:07: iomem range 0xfffffffffec00000-0xfffffffffec0ffff has been reserved [ 2.920012] system 00:07: iomem range 0xfffffffffee00000-0xfffffffffeefffff has been reserved [ 2.924011] system 00:07: iomem range 0xfffffffffefffc00-0xfffffffffeffffff has been reserved [ 2.928015] system 00:07: iomem range 0x100000-0xffffff could not be reserved [ 2.932008] driver: '00:07': driver_bound: bound to device 'system' [ 2.936009] bus: 'pnp': really_probe: bound device 00:07 to driver system [ 2.940027] bus: 'pnp': driver_probe_device: matched device 00:08 with driver system [ 2.944008] bus: 'pnp': really_probe: probing driver system with device 00:08 [ 2.948021] system 00:08: iomem range 0xf0000-0xf3fff could not be reserved [ 2.952014] system 00:08: iomem range 0xf4000-0xf7fff could not be reserved [ 2.956014] system 00:08: iomem range 0xf8000-0xfbfff could not be reserved [ 2.960014] system 00:08: iomem range 0xfc000-0xfffff could not be reserved [ 2.964008] driver: '00:08': driver_bound: bound to device 'system' [ 2.968009] bus: 'pnp': really_probe: bound device 00:08 to driver system [ 2.972111] initcall pnp_system_init+0x0/0xf returned 0 after 74218 usecs [ 2.976010] calling chr_dev_init+0x0/0x89 @ 1 [ 2.980030] device class 'mem': registering [ 2.984113] device: 'mem': device_add [ 2.988113] device: 'kmem': device_add [ 2.992110] device: 'null': device_add [ 2.996114] device: 'port': device_add [ 3.000112] device: 'zero': device_add [ 3.004115] device: 'full': device_add [ 3.008111] device: 'random': device_add [ 3.012114] device: 'urandom': device_add [ 3.016115] device: 'kmsg': device_add [ 3.020113] device: 'oldmem': device_add [ 3.024111] initcall chr_dev_init+0x0/0x89 returned 0 after 42968 usecs [ 3.028010] calling firmware_class_init+0x0/0x61 @ 1 [ 3.032008] device class 'firmware': registering [ 3.036114] initcall firmware_class_init+0x0/0x61 returned 0 after 3906 usecs [ 3.040011] calling cpufreq_gov_performance_init+0x0/0xf @ 1 [ 3.044025] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 usecs [ 3.048010] calling pcibios_assign_resources+0x0/0x91 @ 1 [ 3.052129] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05 [ 3.056013] pci 0000:00:09.0: IO window: 0xc000-0xcfff [ 3.060021] pci 0000:00:09.0: MEM window: 0xda000000-0xda0fffff [ 3.064016] pci 0000:00:09.0: PREFETCH window: disabled [ 3.068026] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 [ 3.072008] pci 0000:00:0b.0: IO window: disabled [ 3.076020] pci 0000:00:0b.0: MEM window: disabled [ 3.080016] pci 0000:00:0b.0: PREFETCH window: disabled [ 3.084026] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 3.088008] pci 0000:00:0c.0: IO window: disabled [ 3.092020] pci 0000:00:0c.0: MEM window: disabled [ 3.096016] pci 0000:00:0c.0: PREFETCH window: disabled [ 3.100026] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 [ 3.104008] pci 0000:00:0d.0: IO window: disabled [ 3.108020] pci 0000:00:0d.0: MEM window: disabled [ 3.112016] pci 0000:00:0d.0: PREFETCH window: disabled [ 3.116031] pci 0000:01:00.0: BAR 6: got res [0xd8000000-0xd801ffff] bus [0xd8000000-0xd801ffff] flags 0x27200 [ 3.120012] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 [ 3.124013] pci 0000:00:0e.0: IO window: 0xb000-0xbfff [ 3.128021] pci 0000:00:0e.0: MEM window: 0xd8000000-0xd9ffffff [ 3.132017] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 3.136046] pci 0000:00:09.0: setting latency timer to 64 [ 3.140041] pci 0000:00:0b.0: setting latency timer to 64 [ 3.144041] pci 0000:00:0c.0: setting latency timer to 64 [ 3.148041] pci 0000:00:0d.0: setting latency timer to 64 [ 3.152041] pci 0000:00:0e.0: setting latency timer to 64 [ 3.156015] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 3.160009] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 3.164009] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 3.168009] pci_bus 0000:05: resource 1 mem: [0xda000000-0xda0fffff] [ 3.172009] pci_bus 0000:05: resource 2 mem: [0x0-0x0] [ 3.176009] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 3.180009] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 3.184009] pci_bus 0000:04: resource 0 mem: [0x0-0x0] [ 3.188009] pci_bus 0000:04: resource 1 mem: [0x0-0x0] [ 3.192009] pci_bus 0000:04: resource 2 mem: [0x0-0x0] [ 3.196009] pci_bus 0000:04: resource 3 mem: [0x0-0x0] [ 3.200009] pci_bus 0000:03: resource 0 mem: [0x0-0x0] [ 3.204009] pci_bus 0000:03: resource 1 mem: [0x0-0x0] [ 3.208009] pci_bus 0000:03: resource 2 mem: [0x0-0x0] [ 3.212009] pci_bus 0000:03: resource 3 mem: [0x0-0x0] [ 3.216009] pci_bus 0000:02: resource 0 mem: [0x0-0x0] [ 3.220009] pci_bus 0000:02: resource 1 mem: [0x0-0x0] [ 3.224009] pci_bus 0000:02: resource 2 mem: [0x0-0x0] [ 3.228009] pci_bus 0000:02: resource 3 mem: [0x0-0x0] [ 3.232009] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 3.236017] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd9ffffff] [ 3.240009] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xd7ffffff] [ 3.244009] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 3.248010] initcall pcibios_assign_resources+0x0/0x91 returned 0 after 191406 usecs [ 3.252010] calling sysctl_core_init+0x0/0x2d @ 1 [ 3.256062] initcall sysctl_core_init+0x0/0x2d returned 0 after 0 usecs [ 3.260011] calling inet_init+0x0/0x199 @ 1 [ 3.264033] NET: Registered protocol family 2 [ 3.316155] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 3.320793] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 3.328060] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 3.337980] TCP: Hash tables configured (established 131072 bind 65536) [ 3.340041] TCP reno registered [ 3.352206] initcall inet_init+0x0/0x199 returned 0 after 85937 usecs [ 3.356011] calling af_unix_init+0x0/0x47 @ 1 [ 3.360017] NET: Registered protocol family 1 [ 3.364033] initcall af_unix_init+0x0/0x47 returned 0 after 3906 usecs [ 3.368010] calling default_rootfs+0x0/0x65 @ 1 [ 3.372154] initcall default_rootfs+0x0/0x65 returned 0 after 0 usecs [ 3.376010] calling i8259A_init_sysfs+0x0/0x1d @ 1 [ 3.380009] Registering sysdev class 'i8259' [ 3.384116] Registering sys device of class 'i8259' [ 3.388014] Registering sys device 'i82590' [ 3.392114] initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 11718 usecs [ 3.396010] calling sbf_init+0x0/0xdd @ 1 [ 3.400010] initcall sbf_init+0x0/0xdd returned 0 after 0 usecs [ 3.404010] calling i8237A_init_sysfs+0x0/0x1d @ 1 [ 3.408009] Registering sysdev class 'i8237' [ 3.412114] Registering sys device of class 'i8237' [ 3.416014] Registering sys device 'i82370' [ 3.420115] initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 11718 usecs [ 3.424010] calling add_rtc_cmos+0x0/0x92 @ 1 [ 3.428013] initcall add_rtc_cmos+0x0/0x92 returned 0 after 0 usecs [ 3.432011] calling cache_sysfs_init+0x0/0x54 @ 1 [ 3.436148] initcall cache_sysfs_init+0x0/0x54 returned 0 after 0 usecs [ 3.440011] calling thermal_throttle_init_device+0x0/0xc0 @ 1 [ 3.444011] initcall thermal_throttle_init_device+0x0/0xc0 returned 0 after 0 usecs [ 3.448010] calling powernow_k6_init+0x0/0x8b @ 1 [ 3.452011] initcall powernow_k6_init+0x0/0x8b returned -19 after 0 usecs [ 3.456010] calling cpufreq_gx_init+0x0/0x16e @ 1 [ 3.460011] initcall cpufreq_gx_init+0x0/0x16e returned -19 after 0 usecs [ 3.464011] calling ioapic_init_sysfs+0x0/0x84 @ 1 [ 3.468009] Registering sysdev class 'ioapic' [ 3.472116] Registering sys device of class 'ioapic' [ 3.476014] Registering sys device 'ioapic0' [ 3.480116] initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 11718 usecs [ 3.484010] calling add_pcspkr+0x0/0x28 @ 1 [ 3.488014] Registering platform device 'pcspkr'. Parent at platform [ 3.492017] device: 'pcspkr': device_add [ 3.496017] bus: 'platform': add device pcspkr [ 3.500116] initcall add_pcspkr+0x0/0x28 returned 0 after 11718 usecs [ 3.504010] calling scx200_init+0x0/0x20 @ 1 [ 3.508009] scx200: NatSemi SCx200 Driver [ 3.512010] bus: 'pci': add driver scx200 [ 3.516112] initcall scx200_init+0x0/0x20 returned 0 after 7812 usecs [ 3.520010] calling microcode_init+0x0/0xf4 @ 1 [ 3.524032] device: 'microcode': device_add [ 3.528111] Registering platform device 'microcode'. Parent at platform [ 3.532010] device: 'microcode': device_add [ 3.536015] bus: 'platform': add device microcode [ 3.540113] microcode: CPU0: AMD CPU family 0xf not supported [ 3.544043] microcode: CPU1: AMD CPU family 0xf not supported [ 3.548047] Microcode Update Driver: v2.00 , Peter Oruba [ 3.552011] initcall microcode_init+0x0/0xf4 returned 0 after 27343 usecs [ 3.556010] calling pt_dump_init+0x0/0x69 @ 1 [ 3.560021] initcall pt_dump_init+0x0/0x69 returned 0 after 0 usecs [ 3.564010] calling aes_init+0x0/0xf @ 1 [ 3.568109] initcall aes_init+0x0/0xf returned 0 after 0 usecs [ 3.572010] calling init+0x0/0xf @ 1 [ 3.576064] initcall init+0x0/0xf returned 0 after 0 usecs [ 3.580011] calling init_sched_debug_procfs+0x0/0x27 @ 1 [ 3.584018] initcall init_sched_debug_procfs+0x0/0x27 returned 0 after 0 usecs [ 3.588010] calling proc_schedstat_init+0x0/0x1c @ 1 [ 3.592015] initcall proc_schedstat_init+0x0/0x1c returned 0 after 0 usecs [ 3.596010] calling proc_execdomains_init+0x0/0x1c @ 1 [ 3.600015] initcall proc_execdomains_init+0x0/0x1c returned 0 after 0 usecs [ 3.604010] calling ioresources_init+0x0/0x31 @ 1 [ 3.608019] initcall ioresources_init+0x0/0x31 returned 0 after 0 usecs [ 3.612010] calling uid_cache_init+0x0/0x76 @ 1 [ 3.616032] initcall uid_cache_init+0x0/0x76 returned 0 after 0 usecs [ 3.620010] calling init_posix_timers+0x0/0xa9 @ 1 [ 3.624024] initcall init_posix_timers+0x0/0xa9 returned 0 after 0 usecs [ 3.628010] calling init_posix_cpu_timers+0x0/0x8d @ 1 [ 3.632010] initcall init_posix_cpu_timers+0x0/0x8d returned 0 after 0 usecs [ 3.636010] calling nsproxy_cache_init+0x0/0x27 @ 1 [ 3.640016] initcall nsproxy_cache_init+0x0/0x27 returned 0 after 0 usecs [ 3.644012] calling create_proc_profile+0x0/0x65 @ 1 [ 3.648011] initcall create_proc_profile+0x0/0x65 returned 0 after 0 usecs [ 3.652010] calling timekeeping_init_device+0x0/0x1d @ 1 [ 3.656009] Registering sysdev class 'timekeeping' [ 3.660120] Registering sys device of class 'timekeeping' [ 3.664014] Registering sys device 'timekeeping0' [ 3.668116] initcall timekeeping_init_device+0x0/0x1d returned 0 after 11718 usecs [ 3.672011] calling init_clocksource_sysfs+0x0/0x43 @ 1 [ 3.676009] Registering sysdev class 'clocksource' [ 3.684122] Registering sys device of class 'clocksource' [ 3.688014] Registering sys device 'clocksource0' [ 3.692114] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 15625 usecs [ 3.696011] calling init_timer_list_procfs+0x0/0x27 @ 1 [ 3.700016] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 0 usecs [ 3.704011] calling init_tstats_procfs+0x0/0x27 @ 1 [ 3.708015] initcall init_tstats_procfs+0x0/0x27 returned 0 after 0 usecs [ 3.712010] calling lockdep_proc_init+0x0/0x37 @ 1 [ 3.716020] initcall lockdep_proc_init+0x0/0x37 returned 0 after 0 usecs [ 3.720010] calling futex_init+0x0/0x8a @ 1 [ 3.724014] initcall futex_init+0x0/0x8a returned 0 after 0 usecs [ 3.728012] calling init_rttest+0x0/0x107 @ 1 [ 3.732010] Registering sysdev class 'rttest' [ 3.736123] Registering sys device of class 'rttest' [ 3.740015] Registering sys device 'rttest0' [ 3.744130] Registering sys device of class 'rttest' [ 3.748021] Registering sys device 'rttest1' [ 3.752123] Registering sys device of class 'rttest' [ 3.756014] Registering sys device 'rttest2' [ 3.760121] Registering sys device of class 'rttest' [ 3.764014] Registering sys device 'rttest3' [ 3.768122] Registering sys device of class 'rttest' [ 3.772015] Registering sys device 'rttest4' [ 3.776121] Registering sys device of class 'rttest' [ 3.780015] Registering sys device 'rttest5' [ 3.784123] Registering sys device of class 'rttest' [ 3.788015] Registering sys device 'rttest6' [ 3.792120] Registering sys device of class 'rttest' [ 3.796015] Registering sys device 'rttest7' [ 3.800116] Initializing RT-Tester: OK [ 3.804013] initcall init_rttest+0x0/0x107 returned 0 after 70312 usecs [ 3.808011] calling proc_dma_init+0x0/0x1c @ 1 [ 3.812017] initcall proc_dma_init+0x0/0x1c returned 0 after 0 usecs [ 3.816011] calling proc_modules_init+0x0/0x1c @ 1 [ 3.820016] initcall proc_modules_init+0x0/0x1c returned 0 after 0 usecs [ 3.824011] calling kallsyms_init+0x0/0x1f @ 1 [ 3.828016] initcall kallsyms_init+0x0/0x1f returned 0 after 0 usecs [ 3.832011] calling audit_init+0x0/0x141 @ 1 [ 3.836010] audit: initializing netlink socket (disabled) [ 3.840075] type=2000 audit(1237374493.840:1): initialized [ 3.844020] initcall audit_init+0x0/0x141 returned 0 after 7812 usecs [ 3.848011] calling audit_tree_init+0x0/0x3b @ 1 [ 3.852013] initcall audit_tree_init+0x0/0x3b returned 0 after 0 usecs [ 3.856011] calling init_kprobes+0x0/0x11e @ 1 [ 3.873536] initcall init_kprobes+0x0/0x11e returned 0 after 11718 usecs [ 3.876011] calling hung_task_init+0x0/0x42 @ 1 [ 3.880092] initcall hung_task_init+0x0/0x42 returned 0 after 0 usecs [ 3.884012] calling utsname_sysctl_init+0x0/0x11 @ 1 [ 3.888052] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 0 usecs [ 3.892012] calling init_markers+0x0/0x14 @ 1 [ 3.896011] initcall init_markers+0x0/0x14 returned 0 after 0 usecs [ 3.900011] calling init_tracepoints+0x0/0x14 @ 1 [ 3.904011] initcall init_tracepoints+0x0/0x14 returned 0 after 0 usecs [ 3.908011] calling init_lstats_procfs+0x0/0x1f @ 1 [ 3.912023] initcall init_lstats_procfs+0x0/0x1f returned 0 after 0 usecs [ 3.916011] calling ftrace_mod_cmd_init+0x0/0xf @ 1 [ 3.920036] initcall ftrace_mod_cmd_init+0x0/0xf returned 0 after 0 usecs [ 3.924011] calling init_events+0x0/0x5f @ 1 [ 3.928015] initcall init_events+0x0/0x5f returned 0 after 0 usecs [ 3.932011] calling init_sched_switch_trace+0x0/0xf @ 1 [ 3.936013] Testing tracer sched_switch: PASSED [ 4.044654] initcall init_sched_switch_trace+0x0/0xf returned 0 after 105468 usecs [ 4.048014] calling init_function_trace+0x0/0x35 @ 1 [ 4.052012] Testing tracer function: PASSED [ 4.172827] Testing dynamic ftrace: PASSED [ 4.408754] initcall init_function_trace+0x0/0x35 returned 0 after 347656 usecs [ 4.412016] calling init_irqsoff_tracer+0x0/0x11 @ 1 [ 4.416012] Testing tracer irqsoff: PASSED [ 4.424622] initcall init_irqsoff_tracer+0x0/0x11 returned 0 after 7812 usecs [ 4.428024] calling stack_trace_init+0x0/0x7a @ 1 [ 4.432040] initcall stack_trace_init+0x0/0x7a returned 0 after 0 usecs [ 4.436013] calling init_kmem_tracer+0x0/0xf @ 1 [ 4.440014] initcall init_kmem_tracer+0x0/0xf returned 0 after 0 usecs [ 4.444012] calling init_blk_tracer+0x0/0x4b @ 1 [ 4.448015] initcall init_blk_tracer+0x0/0x4b returned 0 after 0 usecs [ 4.452012] calling register_ftrace_syscalls+0x0/0x9d @ 1 [ 4.456015] initcall register_ftrace_syscalls+0x0/0x9d returned 0 after 0 usecs [ 4.460013] calling init_per_zone_pages_min+0x0/0x7b @ 1 [ 4.464089] initcall init_per_zone_pages_min+0x0/0x7b returned 0 after 0 usecs [ 4.468012] calling pdflush_init+0x0/0x11 @ 1 [ 4.472075] initcall pdflush_init+0x0/0x11 returned 0 after 0 usecs [ 4.476014] calling kswapd_init+0x0/0x5a @ 1 [ 4.480100] initcall kswapd_init+0x0/0x5a returned 0 after 0 usecs [ 4.484013] calling init_tmpfs+0x0/0xb9 @ 1 [ 4.488150] initcall init_tmpfs+0x0/0xb9 returned 0 after 0 usecs [ 4.492013] calling setup_vmstat+0x0/0xa2 @ 1 [ 4.496052] initcall setup_vmstat+0x0/0xa2 returned 0 after 0 usecs [ 4.500012] calling mm_sysfs_init+0x0/0x22 @ 1 [ 4.504040] initcall mm_sysfs_init+0x0/0x22 returned 0 after 0 usecs [ 4.508013] calling proc_vmalloc_init+0x0/0x1f @ 1 [ 4.512020] initcall proc_vmalloc_init+0x0/0x1f returned 0 after 0 usecs [ 4.516012] calling init_emergency_pool+0x0/0x57 @ 1 [ 4.520211] highmem bounce pool size: 64 pages [ 4.524013] initcall init_emergency_pool+0x0/0x57 returned 0 after 3906 usecs [ 4.528012] calling procswaps_init+0x0/0x1c @ 1 [ 4.532020] initcall procswaps_init+0x0/0x1c returned 0 after 0 usecs [ 4.536012] calling hugetlb_init+0x0/0x230 @ 1 [ 4.540014] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.544040] initcall hugetlb_init+0x0/0x230 returned 0 after 3906 usecs [ 4.548012] calling slab_proc_init+0x0/0x1f @ 1 [ 4.552029] initcall slab_proc_init+0x0/0x1f returned 0 after 0 usecs [ 4.556012] calling slab_sysfs_init+0x0/0xb6 @ 1 [ 4.572238] khelper used greatest stack depth: 6988 bytes left [ 4.596353] initcall slab_sysfs_init+0x0/0xb6 returned 0 after 35156 usecs [ 4.600426] calling fasync_init+0x0/0x24 @ 1 [ 4.604316] initcall fasync_init+0x0/0x24 returned 0 after 0 usecs [ 4.608013] calling proc_filesystems_init+0x0/0x1c @ 1 [ 4.612035] initcall proc_filesystems_init+0x0/0x1c returned 0 after 0 usecs [ 4.616012] calling inotify_setup+0x0/0x11 @ 1 [ 4.620013] initcall inotify_setup+0x0/0x11 returned 0 after 0 usecs [ 4.624012] calling inotify_user_setup+0x0/0x98 @ 1 [ 4.628298] initcall inotify_user_setup+0x0/0x98 returned 0 after 0 usecs [ 4.632013] calling aio_setup+0x0/0xa1 @ 1 [ 4.636728] initcall aio_setup+0x0/0xa1 returned 0 after 0 usecs [ 4.640013] calling proc_locks_init+0x0/0x1c @ 1 [ 4.644025] initcall proc_locks_init+0x0/0x1c returned 0 after 0 usecs [ 4.648012] calling init_mbcache+0x0/0x11 @ 1 [ 4.652013] initcall init_mbcache+0x0/0x11 returned 0 after 0 usecs [ 4.656012] calling dquot_init+0x0/0xc8 @ 1 [ 4.660011] VFS: Disk quotas dquot_6.5.2 [ 4.664323] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 4.668015] initcall dquot_init+0x0/0xc8 returned 0 after 7812 usecs [ 4.672117] calling init_v1_quota_format+0x0/0xf @ 1 [ 4.676014] initcall init_v1_quota_format+0x0/0xf returned 0 after 0 usecs [ 4.680013] calling proc_cmdline_init+0x0/0x1c @ 1 [ 4.684021] initcall proc_cmdline_init+0x0/0x1c returned 0 after 0 usecs [ 4.688012] calling proc_cpuinfo_init+0x0/0x1c @ 1 [ 4.692020] initcall proc_cpuinfo_init+0x0/0x1c returned 0 after 0 usecs [ 4.696013] calling proc_devices_init+0x0/0x1c @ 1 [ 4.700020] initcall proc_devices_init+0x0/0x1c returned 0 after 0 usecs [ 4.704013] calling proc_interrupts_init+0x0/0x1c @ 1 [ 4.708021] initcall proc_interrupts_init+0x0/0x1c returned 0 after 0 usecs [ 4.712013] calling proc_loadavg_init+0x0/0x1c @ 1 [ 4.716020] initcall proc_loadavg_init+0x0/0x1c returned 0 after 0 usecs [ 4.720013] calling proc_meminfo_init+0x0/0x1c @ 1 [ 4.724020] initcall proc_meminfo_init+0x0/0x1c returned 0 after 0 usecs [ 4.728013] calling proc_stat_init+0x0/0x1c @ 1 [ 4.732020] initcall proc_stat_init+0x0/0x1c returned 0 after 0 usecs [ 4.736013] calling proc_uptime_init+0x0/0x27 @ 1 [ 4.740020] initcall proc_uptime_init+0x0/0x27 returned 0 after 0 usecs [ 4.744013] calling proc_version_init+0x0/0x1c @ 1 [ 4.748020] initcall proc_version_init+0x0/0x1c returned 0 after 0 usecs [ 4.752013] calling vmcore_init+0x0/0x75 @ 1 [ 4.756013] initcall vmcore_init+0x0/0x75 returned 0 after 0 usecs [ 4.760013] calling proc_kmsg_init+0x0/0x1f @ 1 [ 4.764020] initcall proc_kmsg_init+0x0/0x1f returned 0 after 0 usecs [ 4.768013] calling proc_page_init+0x0/0x37 @ 1 [ 4.772028] initcall proc_page_init+0x0/0x37 returned 0 after 0 usecs [ 4.776013] calling configfs_init+0x0/0xd6 @ 1 [ 4.780232] initcall configfs_init+0x0/0xd6 returned 0 after 0 usecs [ 4.784013] calling init_devpts_fs+0x0/0x33 @ 1 [ 4.788134] initcall init_devpts_fs+0x0/0x33 returned 0 after 0 usecs [ 4.792013] calling init_ext3_fs+0x0/0x64 @ 1 [ 4.796262] initcall init_ext3_fs+0x0/0x64 returned 0 after 0 usecs [ 4.800014] calling journal_init+0x0/0x85 @ 1 [ 4.804249] initcall journal_init+0x0/0x85 returned 0 after 0 usecs [ 4.808014] calling init_cramfs_fs+0x0/0x29 @ 1 [ 4.812042] initcall init_cramfs_fs+0x0/0x29 returned 0 after 0 usecs [ 4.816013] calling init_ramfs_fs+0x0/0xf @ 1 [ 4.820014] initcall init_ramfs_fs+0x0/0xf returned 0 after 0 usecs [ 4.824013] calling init_hugetlbfs_fs+0x0/0x82 @ 1 [ 4.828239] initcall init_hugetlbfs_fs+0x0/0x82 returned 0 after 0 usecs [ 4.832015] calling init_fat_fs+0x0/0x46 @ 1 [ 4.836237] initcall init_fat_fs+0x0/0x46 returned 0 after 0 usecs [ 4.840014] calling init_msdos_fs+0x0/0xf @ 1 [ 4.844015] initcall init_msdos_fs+0x0/0xf returned 0 after 0 usecs [ 4.848013] calling init_iso9660_fs+0x0/0x64 @ 1 [ 4.852220] initcall init_iso9660_fs+0x0/0x64 returned 0 after 0 usecs [ 4.856014] calling vxfs_init+0x0/0x4d @ 1 [ 4.860226] initcall vxfs_init+0x0/0x4d returned 0 after 0 usecs [ 4.864014] calling init_nls_cp737+0x0/0xf @ 1 [ 4.868039] initcall init_nls_cp737+0x0/0xf returned 0 after 0 usecs [ 4.872013] calling init_nls_cp857+0x0/0xf @ 1 [ 4.876013] initcall init_nls_cp857+0x0/0xf returned 0 after 0 usecs [ 4.880013] calling init_nls_cp865+0x0/0xf @ 1 [ 4.884014] initcall init_nls_cp865+0x0/0xf returned 0 after 0 usecs [ 4.888013] calling init_nls_cp869+0x0/0xf @ 1 [ 4.892013] initcall init_nls_cp869+0x0/0xf returned 0 after 0 usecs [ 4.896013] calling init_nls_cp874+0x0/0xf @ 1 [ 4.900014] initcall init_nls_cp874+0x0/0xf returned 0 after 0 usecs [ 4.904013] calling init_nls_cp932+0x0/0xf @ 1 [ 4.908014] initcall init_nls_cp932+0x0/0xf returned 0 after 0 usecs [ 4.912013] calling init_nls_euc_jp+0x0/0x39 @ 1 [ 4.916014] initcall init_nls_euc_jp+0x0/0x39 returned 0 after 0 usecs [ 4.920022] calling init_nls_cp1251+0x0/0xf @ 1 [ 4.924014] initcall init_nls_cp1251+0x0/0xf returned 0 after 0 usecs [ 4.928013] calling init_nls_iso8859_1+0x0/0xf @ 1 [ 4.932014] initcall init_nls_iso8859_1+0x0/0xf returned 0 after 0 usecs [ 4.936013] calling init_nls_iso8859_6+0x0/0xf @ 1 [ 4.940014] initcall init_nls_iso8859_6+0x0/0xf returned 0 after 0 usecs [ 4.944013] calling init_nls_iso8859_13+0x0/0xf @ 1 [ 4.948014] initcall init_nls_iso8859_13+0x0/0xf returned 0 after 0 usecs [ 4.952013] calling init_hpfs_fs+0x0/0x54 @ 1 [ 4.956228] initcall init_hpfs_fs+0x0/0x54 returned 0 after 0 usecs [ 4.960014] calling init_autofs_fs+0x0/0xf @ 1 [ 4.964015] initcall init_autofs_fs+0x0/0xf returned 0 after 0 usecs [ 4.968013] calling init_autofs4_fs+0x0/0x1e @ 1 [ 4.972015] initcall init_autofs4_fs+0x0/0x1e returned -16 after 0 usecs [ 4.976013] initcall init_autofs4_fs+0x0/0x1e returned with error code -16 [ 4.980013] calling fuse_init+0x0/0x10a @ 1 [ 4.984012] fuse init (API version 7.11) [ 4.988245] device: 'fuse': device_add [ 4.992136] initcall fuse_init+0x0/0x10a returned 0 after 7812 usecs [ 4.996013] calling init_udf_fs+0x0/0x54 @ 1 [ 5.000224] initcall init_udf_fs+0x0/0x54 returned 0 after 0 usecs [ 5.004014] calling ipc_init+0x0/0x20 @ 1 [ 5.008036] msgmni has been set to 1721 [ 5.012030] initcall ipc_init+0x0/0x20 returned 0 after 3906 usecs [ 5.016013] calling ipc_sysctl_init+0x0/0x11 @ 1 [ 5.020135] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 0 usecs [ 5.024013] calling init_mqueue_fs+0x0/0xb1 @ 1 [ 5.028230] initcall init_mqueue_fs+0x0/0xb1 returned 0 after 0 usecs [ 5.032014] calling key_proc_init+0x0/0x4e @ 1 [ 5.036029] initcall key_proc_init+0x0/0x4e returned 0 after 0 usecs [ 5.040013] calling crypto_algapi_init+0x0/0xc @ 1 [ 5.044040] initcall crypto_algapi_init+0x0/0xc returned 0 after 0 usecs [ 5.048013] calling chainiv_module_init+0x0/0xf @ 1 [ 5.052016] initcall chainiv_module_init+0x0/0xf returned 0 after 0 usecs [ 5.056013] calling eseqiv_module_init+0x0/0xf @ 1 [ 5.060014] initcall eseqiv_module_init+0x0/0xf returned 0 after 0 usecs [ 5.064013] calling seqiv_module_init+0x0/0xf @ 1 [ 5.068014] initcall seqiv_module_init+0x0/0xf returned 0 after 0 usecs [ 5.072013] calling hmac_module_init+0x0/0xf @ 1 [ 5.076015] initcall hmac_module_init+0x0/0xf returned 0 after 0 usecs [ 5.080013] calling crypto_null_mod_init+0x0/0x69 @ 1 [ 5.084101] alg: No test for cipher_null (cipher_null-generic) [ 5.092192] alg: No test for digest_null (digest_null-generic) [ 5.096099] alg: No test for compress_null (compress_null-generic) [ 5.104037] initcall crypto_null_mod_init+0x0/0x69 returned 0 after 19531 usecs [ 5.108034] calling md5_mod_init+0x0/0xf @ 1 [ 5.112078] initcall md5_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.112078] cryptomgr_test used greatest stack depth: 6940 bytes left [ 5.116014] calling rmd128_mod_init+0x0/0xf @ 1 [ 5.120092] initcall rmd128_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.120092] cryptomgr_test used greatest stack depth: 6888 bytes left [ 5.124014] calling rmd256_mod_init+0x0/0xf @ 1 [ 5.128085] initcall rmd256_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.132014] calling sha1_generic_mod_init+0x0/0xf @ 1 [ 5.136085] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.140014] calling sha512_generic_mod_init+0x0/0x33 @ 1 [ 5.144095] initcall sha512_generic_mod_init+0x0/0x33 returned 0 after 0 usecs [ 5.148014] calling crypto_ecb_module_init+0x0/0xf @ 1 [ 5.152017] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 0 usecs [ 5.156013] calling crypto_cbc_module_init+0x0/0xf @ 1 [ 5.160015] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 usecs [ 5.164013] calling crypto_cts_module_init+0x0/0xf @ 1 [ 5.168015] initcall crypto_cts_module_init+0x0/0xf returned 0 after 0 usecs [ 5.172013] calling des_generic_mod_init+0x0/0x33 @ 1 [ 5.176099] initcall des_generic_mod_init+0x0/0x33 returned 0 after 0 usecs [ 5.180014] calling fcrypt_mod_init+0x0/0xf @ 1 [ 5.184083] alg: No test for fcrypt (fcrypt-generic) [ 5.188020] initcall fcrypt_mod_init+0x0/0xf returned 0 after 3906 usecs [ 5.192013] calling twofish_mod_init+0x0/0xf @ 1 [ 5.196138] initcall twofish_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.200014] calling aes_init+0x0/0xf @ 1 [ 5.204081] initcall aes_init+0x0/0xf returned 0 after 0 usecs [ 5.208014] calling camellia_init+0x0/0xf @ 1 [ 5.212083] initcall camellia_init+0x0/0xf returned 0 after 0 usecs [ 5.216014] calling arc4_init+0x0/0xf @ 1 [ 5.220082] initcall arc4_init+0x0/0xf returned 0 after 0 usecs [ 5.224014] calling khazad_mod_init+0x0/0xf @ 1 [ 5.228083] initcall khazad_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.232014] calling seed_init+0x0/0xf @ 1 [ 5.236082] initcall seed_init+0x0/0xf returned 0 after 0 usecs [ 5.240014] calling michael_mic_init+0x0/0xf @ 1 [ 5.248020] initcall michael_mic_init+0x0/0xf returned 0 after 3906 usecs [ 5.252014] calling crc32c_mod_init+0x0/0xf @ 1 [ 5.256083] initcall crc32c_mod_init+0x0/0xf returned 0 after 0 usecs [ 5.260014] calling crypto_authenc_module_init+0x0/0xf @ 1 [ 5.264015] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 0 usecs [ 5.268013] calling krng_mod_init+0x0/0xf @ 1 [ 5.272083] alg: No test for stdrng (krng) [ 5.276041] initcall krng_mod_init+0x0/0xf returned 0 after 3906 usecs [ 5.280014] calling proc_genhd_init+0x0/0x31 @ 1 [ 5.284029] initcall proc_genhd_init+0x0/0x31 returned 0 after 0 usecs [ 5.288013] calling bsg_init+0x0/0x106 @ 1 [ 5.292250] device class 'bsg': registering [ 5.296141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 5.300015] initcall bsg_init+0x0/0x106 returned 0 after 7812 usecs [ 5.304014] calling noop_init+0x0/0x11 @ 1 [ 5.308039] io scheduler noop registered (default) [ 5.312014] initcall noop_init+0x0/0x11 returned 0 after 3906 usecs [ 5.316013] calling percpu_counter_startup+0x0/0x16 @ 1 [ 5.320016] initcall percpu_counter_startup+0x0/0x16 returned 0 after 0 usecs [ 5.324013] calling audit_classes_init+0x0/0x4f @ 1 [ 5.328023] initcall audit_classes_init+0x0/0x4f returned 0 after 0 usecs [ 5.332013] calling dynamic_printk_init+0x0/0xe2 @ 1 [ 5.341040] initcall dynamic_printk_init+0x0/0xe2 returned 0 after 3906 usecs [ 5.344015] calling pci_init+0x0/0x31 @ 1 [ 5.348023] pci 0000:00:00.0: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.352080] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.356015] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.360015] pci 0000:00:00.0: calling pci_fixup_video+0x0/0x9a [ 5.364020] pci 0000:00:01.0: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.368019] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.372014] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.376014] pci 0000:00:01.0: calling pci_fixup_video+0x0/0x9a [ 5.380019] pci 0000:00:01.1: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.384032] pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x26 [ 5.388014] pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0x89 [ 5.392014] pci 0000:00:01.1: calling pci_fixup_video+0x0/0x9a [ 5.396020] pci 0000:00:02.0: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.400032] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.404014] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.424042] pci 0000:00:02.0: calling pci_fixup_video+0x0/0x9a [ 5.428029] pci 0000:00:02.1: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.436019] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x26 [ 5.440014] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x89 [ 5.444051] pci 0000:00:02.1: calling pci_fixup_video+0x0/0x9a [ 5.448020] pci 0000:00:04.0: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.452033] pci 0000:00:04.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.456014] pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.460014] pci 0000:00:04.0: calling pci_fixup_video+0x0/0x9a [ 5.464020] pci 0000:00:06.0: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.468032] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.472015] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.476014] pci 0000:00:06.0: calling pci_fixup_video+0x0/0x9a [ 5.480020] pci 0000:00:09.0: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.484019] pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.488015] pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.492014] pci 0000:00:09.0: calling pci_fixup_video+0x0/0x9a [ 5.496052] pci 0000:00:0a.0: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.500034] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.504015] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.508015] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0x9a [ 5.512020] pci 0000:00:0b.0: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.520182] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.524015] pci 0000:00:0b.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x6e [ 5.528053] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 5.532050] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.536015] pci 0000:00:0b.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x68 [ 5.540015] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.544015] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.548015] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0x9a [ 5.552020] pci 0000:00:0c.0: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.560212] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.564015] pci 0000:00:0c.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x6e [ 5.568052] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 5.572050] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.576015] pci 0000:00:0c.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x68 [ 5.580015] pci 0000:00:0c.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.584015] pci 0000:00:0c.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.588015] pci 0000:00:0c.0: calling pci_fixup_video+0x0/0x9a [ 5.592020] pci 0000:00:0d.0: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.600291] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.604015] pci 0000:00:0d.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x6e [ 5.608052] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 5.612050] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.616015] pci 0000:00:0d.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x68 [ 5.620015] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.624015] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.628015] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0x9a [ 5.632020] pci 0000:00:0e.0: calling nv_msi_ht_cap_quirk+0x0/0x1ba [ 5.636419] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.640015] pci 0000:00:0e.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x6e [ 5.644052] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 5.648050] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 5.652015] pci 0000:00:0e.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x68 [ 5.656016] pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.660015] pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.664015] pci 0000:00:0e.0: calling pci_fixup_video+0x0/0x9a [ 5.668021] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.672015] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.676015] pci 0000:00:18.0: calling pci_fixup_video+0x0/0x9a [ 5.680032] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x26 [ 5.684015] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x89 [ 5.688015] pci 0000:00:18.1: calling pci_fixup_video+0x0/0x9a [ 5.692021] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x26 [ 5.696015] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x89 [ 5.700015] pci 0000:00:18.2: calling pci_fixup_video+0x0/0x9a [ 5.704021] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x26 [ 5.708015] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x89 [ 5.712015] pci 0000:00:18.3: calling pci_fixup_video+0x0/0x9a [ 5.716021] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.720015] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.724015] pci 0000:05:07.0: calling pci_fixup_video+0x0/0x9a [ 5.728021] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x26 [ 5.732015] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x89 [ 5.736015] pci 0000:01:00.0: calling pci_fixup_video+0x0/0x9a [ 5.740023] pci 0000:01:00.0: Boot video device [ 5.744021] pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x26 [ 5.748015] pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0x89 [ 5.752015] pci 0000:01:00.1: calling pci_fixup_video+0x0/0x9a [ 5.756019] initcall pci_init+0x0/0x31 returned 0 after 398438 usecs [ 5.760015] calling pci_proc_init+0x0/0x5b @ 1 [ 5.764276] initcall pci_proc_init+0x0/0x5b returned 0 after 0 usecs [ 5.768015] calling pcie_portdrv_init+0x0/0x41 @ 1 [ 5.772141] bus: 'pci_express': registered [ 5.776015] bus: 'pci': add driver pcieport-driver [ 5.780030] bus: 'pci': driver_probe_device: matched device 0000:00:0b.0 with driver pcieport-driver [ 5.784014] bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:0b.0 [ 5.788089] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 5.796223] alloc irq_desc for 24 on cpu 0 node 0 [ 5.800011] alloc kstat_irqs on cpu 0 node 0 [ 5.800038] pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X [ 5.804059] device: '0000:00:0b.0:pcie00': device_add [ 5.808023] bus: 'pci_express': add device 0000:00:0b.0:pcie00 [ 5.812207] driver: '0000:00:0b.0': driver_bound: bound to device 'pcieport-driver' [ 5.816041] bus: 'pci': really_probe: bound device 0000:00:0b.0 to driver pcieport-driver [ 5.820016] bus: 'pci': driver_probe_device: matched device 0000:00:0c.0 with driver pcieport-driver [ 5.824013] bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:0c.0 [ 5.828084] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 5.832300] alloc irq_desc for 25 on cpu 0 node 0 [ 5.836011] alloc kstat_irqs on cpu 0 node 0 [ 5.836035] pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X [ 5.840059] device: '0000:00:0c.0:pcie00': device_add [ 5.844023] bus: 'pci_express': add device 0000:00:0c.0:pcie00 [ 5.848205] driver: '0000:00:0c.0': driver_bound: bound to device 'pcieport-driver' [ 5.852015] bus: 'pci': really_probe: bound device 0000:00:0c.0 to driver pcieport-driver [ 5.856016] bus: 'pci': driver_probe_device: matched device 0000:00:0d.0 with driver pcieport-driver [ 5.860013] bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:0d.0 [ 5.864084] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 5.868300] alloc irq_desc for 26 on cpu 0 node 0 [ 5.872011] alloc kstat_irqs on cpu 0 node 0 [ 5.872035] pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X [ 5.876059] device: '0000:00:0d.0:pcie00': device_add [ 5.880022] bus: 'pci_express': add device 0000:00:0d.0:pcie00 [ 5.884204] driver: '0000:00:0d.0': driver_bound: bound to device 'pcieport-driver' [ 5.888015] bus: 'pci': really_probe: bound device 0000:00:0d.0 to driver pcieport-driver [ 5.892016] bus: 'pci': driver_probe_device: matched device 0000:00:0e.0 with driver pcieport-driver [ 5.896013] bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:0e.0 [ 5.900084] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 5.904307] alloc irq_desc for 27 on cpu 0 node 0 [ 5.908011] alloc kstat_irqs on cpu 0 node 0 [ 5.912013] pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X [ 5.916059] device: '0000:00:0e.0:pcie00': device_add [ 5.920023] bus: 'pci_express': add device 0000:00:0e.0:pcie00 [ 5.924205] driver: '0000:00:0e.0': driver_bound: bound to device 'pcieport-driver' [ 5.928015] bus: 'pci': really_probe: bound device 0000:00:0e.0 to driver pcieport-driver [ 5.932137] initcall pcie_portdrv_init+0x0/0x41 returned 0 after 156250 usecs [ 5.936024] calling genericbl_init+0x0/0xf @ 1 [ 5.940014] bus: 'platform': add driver generic-bl [ 5.944137] initcall genericbl_init+0x0/0xf returned 0 after 3906 usecs [ 5.948016] calling progearbl_init+0x0/0x49 @ 1 [ 5.952014] bus: 'platform': add driver progear-bl [ 5.956137] Registering platform device 'progear-bl'. Parent at platform [ 5.960014] device: 'progear-bl': device_add [ 5.964023] bus: 'platform': add device progear-bl [ 5.968137] bus: 'platform': driver_probe_device: matched device progear-bl with driver progear-bl [ 5.972014] bus: 'platform': really_probe: probing driver progear-bl with device progear-bl [ 5.976031] ALI M7101 PMU not found. [ 5.980066] initcall progearbl_init+0x0/0x49 returned 0 after 27343 usecs [ 5.984015] calling pnpbios_thread_init+0x0/0x4e @ 1 [ 5.988085] initcall pnpbios_thread_init+0x0/0x4e returned 0 after 0 usecs [ 5.992016] calling isapnp_init+0x0/0x288 @ 1 [ 5.996019] device: 'pnp1': device_add [ 6.000023] isapnp: Scanning for PnP cards... [ 6.357641] isapnp: No Plug & Play device found [ 6.360016] initcall isapnp_init+0x0/0x288 returned 0 after 355469 usecs [ 6.364015] calling bq24022_init+0x0/0x14 @ 1 [ 6.368015] bus: 'platform': add driver bq24022 [ 6.372139] bus: 'platform': remove driver bq24022 [ 6.376142] driver: 'bq24022': driver_release [ 6.380022] initcall bq24022_init+0x0/0x14 returned -19 after 11718 usecs [ 6.384017] calling rand_initialize+0x0/0x2a @ 1 [ 6.388074] initcall rand_initialize+0x0/0x2a returned 0 after 0 usecs [ 6.392015] calling tty_init+0x0/0xd5 @ 1 [ 6.396022] device: 'tty': device_add [ 6.400141] device: 'console': device_add [ 6.404140] device: 'tty0': device_add [ 6.408138] device class 'vc': registering [ 6.412142] device: 'vcs': device_add [ 6.416138] device: 'vcsa': device_add [ 6.420137] device: 'tty1': device_add [ 6.424138] device: 'tty2': device_add [ 6.428140] device: 'tty3': device_add [ 6.432138] device: 'tty4': device_add [ 6.436034] device: 'tty5': device_add [ 6.439727] device: 'tty6': device_add [ 6.440136] device: 'tty7': device_add [ 6.444139] device: 'tty8': device_add [ 6.448138] device: 'tty9': device_add [ 6.452147] device: 'tty10': device_add [ 6.456133] device: 'tty11': device_add [ 6.460143] device: 'tty12': device_add [ 6.464181] device: 'tty13': device_add [ 6.468124] device: 'tty14': device_add [ 6.472168] device: 'tty15': device_add [ 6.476106] device: 'tty16': device_add [ 6.480102] device: 'tty17': device_add [ 6.484115] device: 'tty18': device_add [ 6.488123] device: 'tty19': device_add [ 6.492141] device: 'tty20': device_add [ 6.496146] device: 'tty21': device_add [ 6.500138] device: 'tty22': device_add [ 6.504142] device: 'tty23': device_add [ 6.508138] device: 'tty24': device_add [ 6.512139] device: 'tty25': device_add [ 6.516138] device: 'tty26': device_add [ 6.520138] device: 'tty27': device_add [ 6.524137] device: 'tty28': device_add [ 6.528137] device: 'tty29': device_add [ 6.532138] device: 'tty30': device_add [ 6.536142] device: 'tty31': device_add [ 6.540138] device: 'tty32': device_add [ 6.544137] device: 'tty33': device_add [ 6.548138] device: 'tty34': device_add [ 6.552137] device: 'tty35': device_add [ 6.556138] device: 'tty36': device_add [ 6.560138] device: 'tty37': device_add [ 6.564138] device: 'tty38': device_add [ 6.568138] device: 'tty39': device_add [ 6.572138] device: 'tty40': device_add [ 6.576137] device: 'tty41': device_add [ 6.580138] device: 'tty42': device_add [ 6.584138] device: 'tty43': device_add [ 6.588138] device: 'tty44': device_add [ 6.592138] device: 'tty45': device_add [ 6.596138] device: 'tty46': device_add [ 6.600137] device: 'tty47': device_add [ 6.604138] device: 'tty48': device_add [ 6.608138] device: 'tty49': device_add [ 6.612138] device: 'tty50': device_add [ 6.616137] device: 'tty51': device_add [ 6.620138] device: 'tty52': device_add [ 6.624140] device: 'tty53': device_add [ 6.628138] device: 'tty54': device_add [ 6.632138] device: 'tty55': device_add [ 6.636138] device: 'tty56': device_add [ 6.640138] device: 'tty57': device_add [ 6.644139] device: 'tty58': device_add [ 6.648140] device: 'tty59': device_add [ 6.652138] device: 'tty60': device_add [ 6.656138] device: 'tty61': device_add [ 6.660138] device: 'tty62': device_add [ 6.664137] device: 'tty63': device_add [ 6.668212] initcall tty_init+0x0/0xd5 returned 0 after 265625 usecs [ 6.672018] calling pty_init+0x0/0xc @ 1 [ 6.676076] device: 'ptmx': device_add [ 6.680139] initcall pty_init+0x0/0xc returned 0 after 3906 usecs [ 6.684017] calling sysrq_init+0x0/0x1f @ 1 [ 6.688030] initcall sysrq_init+0x0/0x1f returned 0 after 0 usecs [ 6.692015] calling nozomi_init+0x0/0xf4 @ 1 [ 6.696014] Initializing Nozomi driver 2.1d (build date: Mar 18 2009 11:06:49) [ 6.700039] bus: 'pci': add driver nozomi [ 6.704138] initcall nozomi_init+0x0/0xf4 returned 0 after 7812 usecs [ 6.708016] calling raw_init+0x0/0xc0 @ 1 [ 6.712020] device class 'raw': registering [ 6.716138] device: 'rawctl': device_add [ 6.720138] initcall raw_init+0x0/0xc0 returned 0 after 7812 usecs [ 6.724015] calling nvram_init+0x0/0x70 @ 1 [ 6.728019] device: 'nvram': device_add [ 6.732138] Non-volatile memory driver v1.3 [ 6.736017] initcall nvram_init+0x0/0x70 returned 0 after 7812 usecs [ 6.740015] calling scx200_gpio_init+0x0/0x112 @ 1 [ 6.744014] scx200_gpio: no SCx200 gpio present [ 6.748016] initcall scx200_gpio_init+0x0/0x112 returned -19 after 3906 usecs [ 6.752015] calling nsc_gpio_init+0x0/0x11 @ 1 [ 6.756014] nsc_gpio initializing [ 6.759303] initcall nsc_gpio_init+0x0/0x11 returned 0 after 0 usecs [ 6.760015] calling cs5535_gpio_init+0x0/0x146 @ 1 [ 6.764027] cs5535_gpio: DIVIL not found [ 6.768016] initcall cs5535_gpio_init+0x0/0x146 returned -19 after 3906 usecs [ 6.772021] calling mwave_init+0x0/0x265 @ 1 [ 6.776022] smapi::smapi_init, ERROR invalid usSmapiID [ 6.780015] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 6.784015] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 6.788014] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 6.792016] initcall mwave_init+0x0/0x265 returned -5 after 15625 usecs [ 6.796016] initcall mwave_init+0x0/0x265 returned with error code -5 [ 6.800016] calling ipmi_init_msghandler_mod+0x0/0xc @ 1 [ 6.804016] bus: 'platform': add driver ipmi [ 6.808138] ipmi message handler version 39.2 [ 6.812026] initcall ipmi_init_msghandler_mod+0x0/0xc returned 0 after 7812 usecs [ 6.816017] calling ipmi_poweroff_init+0x0/0x7b @ 1 [ 6.820015] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 6.824090] initcall ipmi_poweroff_init+0x0/0x7b returned 0 after 3906 usecs [ 6.828016] calling serial8250_init+0x0/0xf3 @ 1 [ 6.832015] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 6.836053] Registering platform device 'serial8250'. Parent at platform [ 6.840015] device: 'serial8250': device_add [ 6.844024] bus: 'platform': add device serial8250 [ 6.848175] async_waiting @ 1 [ 6.852040] async_continuing @ 1 after 0 usec [ 6.984088] async_waiting @ 1 [ 6.986930] async_continuing @ 1 after 0 usec [ 7.116122] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 7.120022] device: 'ttyS0': device_add [ 7.124139] device: 'ttyS1': device_add [ 7.128138] device: 'ttyS2': device_add [ 7.132139] device: 'ttyS3': device_add [ 7.136139] bus: 'platform': add driver serial8250 [ 7.140027] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250 [ 7.144015] bus: 'platform': really_probe: probing driver serial8250 with device serial8250 [ 7.148024] driver: 'serial8250': driver_bound: bound to device 'serial8250' [ 7.152016] bus: 'platform': really_probe: bound device serial8250 to driver serial8250 [ 7.156138] initcall serial8250_init+0x0/0xf3 returned 0 after 316406 usecs [ 7.160017] calling mca_init+0x0/0x1d @ 1 [ 7.164016] initcall mca_init+0x0/0x1d returned -19 after 0 usecs [ 7.168016] calling jsm_init_module+0x0/0x3a @ 1 [ 7.172066] bus: 'pci': add driver jsm [ 7.176138] initcall jsm_init_module+0x0/0x3a returned 0 after 3906 usecs [ 7.180017] calling isa_bus_init+0x0/0x33 @ 1 [ 7.188053] bus: 'isa': registered [ 7.191328] device: 'isa': device_add [ 7.192026] initcall isa_bus_init+0x0/0x33 returned 0 after 7812 usecs [ 7.196018] calling topology_sysfs_init+0x0/0x8e @ 1 [ 7.200058] initcall topology_sysfs_init+0x0/0x8e returned 0 after 0 usecs [ 7.204016] calling cpqarray_init+0x0/0x5a @ 1 [ 7.208015] Compaq SMART2 Driver (v 2.6.0) [ 7.212017] bus: 'pci': add driver cpqarray [ 7.216139] bus: 'pci': remove driver cpqarray [ 7.220139] driver: 'cpqarray': driver_release [ 7.224024] initcall cpqarray_init+0x0/0x5a returned -19 after 15625 usecs [ 7.228016] calling mm_init+0x0/0x14a @ 1 [ 7.232016] bus: 'pci': add driver umem [ 7.236138] MM: desc_per_page = 128 [ 7.240028] initcall mm_init+0x0/0x14a returned 0 after 7812 usecs [ 7.244016] calling nbd_init+0x0/0x277 @ 1 [ 7.252512] nbd: registered device at major 43 [ 7.256019] device: 'nbd0': device_add [ 7.260165] device: '43:0': device_add [ 7.264141] device: 'nbd1': device_add [ 7.268140] device: '43:1': device_add [ 7.272139] device: 'nbd2': device_add [ 7.276139] device: '43:2': device_add [ 7.280140] device: 'nbd3': device_add [ 7.284139] device: '43:3': device_add [ 7.288057] device: 'nbd4': device_add [ 7.292076] device: '43:4': device_add [ 7.295769] device: 'nbd5': device_add [ 7.296137] device: '43:5': device_add [ 7.300139] device: 'nbd6': device_add [ 7.304139] device: '43:6': device_add [ 7.308144] device: 'nbd7': device_add [ 7.312141] device: '43:7': device_add [ 7.316153] device: 'nbd8': device_add [ 7.320166] device: '43:8': device_add [ 7.324146] device: 'nbd9': device_add [ 7.328157] device: '43:9': device_add [ 7.332149] device: 'nbd10': device_add [ 7.336140] device: '43:10': device_add [ 7.340143] device: 'nbd11': device_add [ 7.344139] device: '43:11': device_add [ 7.348145] device: 'nbd12': device_add [ 7.352140] device: '43:12': device_add [ 7.356141] device: 'nbd13': device_add [ 7.360139] device: '43:13': device_add [ 7.364138] device: 'nbd14': device_add [ 7.368146] device: '43:14': device_add [ 7.372140] device: 'nbd15': device_add [ 7.376140] device: '43:15': device_add [ 7.380140] initcall nbd_init+0x0/0x277 returned 0 after 128906 usecs [ 7.384017] calling ub_init+0x0/0x71 @ 1 [ 7.388020] bus: 'usb': add driver ub [ 7.392140] usbcore: registered new interface driver ub [ 7.396051] initcall ub_init+0x0/0x71 returned 0 after 7812 usecs [ 7.400016] calling ibmasm_init+0x0/0x56 @ 1 [ 7.404024] bus: 'pci': add driver ibmasm [ 7.408139] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 7.412019] initcall ibmasm_init+0x0/0x56 returned 0 after 7812 usecs [ 7.416016] calling enclosure_init+0x0/0x14 @ 1 [ 7.420015] device class 'enclosure': registering [ 7.424103] initcall enclosure_init+0x0/0x14 returned 0 after 3906 usecs [ 7.428017] calling e1000_init_module+0x0/0x6e @ 1 [ 7.432015] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 7.436015] Copyright (c) 1999-2006 Intel Corporation. [ 7.440016] bus: 'pci': add driver e1000 [ 7.444139] initcall e1000_init_module+0x0/0x6e returned 0 after 11718 usecs [ 7.448017] calling e1000_init_module+0x0/0x53 @ 1 [ 7.452015] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 7.456015] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 7.460016] bus: 'pci': add driver e1000e [ 7.464138] initcall e1000_init_module+0x0/0x53 returned 0 after 11718 usecs [ 7.468017] calling atl1e_init_module+0x0/0x16 @ 1 [ 7.472016] bus: 'pci': add driver ATL1E [ 7.476139] initcall atl1e_init_module+0x0/0x16 returned 0 after 3906 usecs [ 7.480017] calling atl1c_init_module+0x0/0x16 @ 1 [ 7.484016] bus: 'pci': add driver atl1c [ 7.488139] initcall atl1c_init_module+0x0/0x16 returned 0 after 3906 usecs [ 7.492017] calling happy_meal_probe+0x0/0x16 @ 1 [ 7.496024] bus: 'pci': add driver hme [ 7.500139] initcall happy_meal_probe+0x0/0x16 returned 0 after 3906 usecs [ 7.504017] calling gem_init+0x0/0x16 @ 1 [ 7.508016] bus: 'pci': add driver gem [ 7.512139] initcall gem_init+0x0/0x16 returned 0 after 3906 usecs [ 7.516017] calling vortex_init+0x0/0xbf @ 1 [ 7.520017] bus: 'pci': add driver 3c59x [ 7.524139] bus: 'eisa': add driver 3c59x [ 7.528139] initcall vortex_init+0x0/0xbf returned 0 after 7812 usecs [ 7.532016] calling typhoon_init+0x0/0x16 @ 1 [ 7.536017] bus: 'pci': add driver typhoon [ 7.540139] initcall typhoon_init+0x0/0x16 returned 0 after 3906 usecs [ 7.544017] calling e100_init_module+0x0/0x4d @ 1 [ 7.548016] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI [ 7.552015] e100: Copyright(c) 1999-2006 Intel Corporation [ 7.556016] bus: 'pci': add driver e100 [ 7.560139] initcall e100_init_module+0x0/0x4d returned 0 after 11718 usecs [ 7.564017] calling tlan_probe+0x0/0xba @ 1 [ 7.568016] ThunderLAN driver v1.15a [ 7.571563] bus: 'pci': add driver tlan [ 7.576031] TLAN: 0 devices installed, PCI: 0 EISA: 0 [ 7.580040] bus: 'pci': remove driver tlan [ 7.584140] driver: 'tlan': driver_release [ 7.588020] initcall tlan_probe+0x0/0xba returned -19 after 19531 usecs [ 7.592017] calling sis190_init_module+0x0/0x16 @ 1 [ 7.596017] bus: 'pci': add driver sis190 [ 7.600139] initcall sis190_init_module+0x0/0x16 returned 0 after 3906 usecs [ 7.604017] calling sis900_init_module+0x0/0x16 @ 1 [ 7.608017] bus: 'pci': add driver sis900 [ 7.612150] initcall sis900_init_module+0x0/0x16 returned 0 after 3906 usecs [ 7.616017] calling r6040_init+0x0/0x16 @ 1 [ 7.620017] bus: 'pci': add driver r6040 [ 7.624139] initcall r6040_init+0x0/0x16 returned 0 after 3906 usecs [ 7.628017] calling acenic_init+0x0/0x16 @ 1 [ 7.632017] bus: 'pci': add driver acenic [ 7.636139] initcall acenic_init+0x0/0x16 returned 0 after 3906 usecs [ 7.640017] calling natsemi_init_mod+0x0/0x16 @ 1 [ 7.644016] bus: 'pci': add driver natsemi [ 7.648139] initcall natsemi_init_mod+0x0/0x16 returned 0 after 3906 usecs [ 7.652017] calling ns83820_init+0x0/0x20 @ 1 [ 7.656015] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 7.660016] bus: 'pci': add driver ns83820 [ 7.664139] initcall ns83820_init+0x0/0x20 returned 0 after 7812 usecs [ 7.668017] calling fealnx_init+0x0/0x16 @ 1 [ 7.672017] bus: 'pci': add driver fealnx [ 7.676139] initcall fealnx_init+0x0/0x16 returned 0 after 3906 usecs [ 7.680017] calling tg3_init+0x0/0x16 @ 1 [ 7.684017] bus: 'pci': add driver tg3 [ 7.688139] initcall tg3_init+0x0/0x16 returned 0 after 3906 usecs [ 7.692017] calling velocity_init_module+0x0/0x16 @ 1 [ 7.696017] bus: 'pci': add driver via-velocity [ 7.700139] initcall velocity_init_module+0x0/0x16 returned 0 after 3906 usecs [ 7.704017] calling starfire_init+0x0/0x16 @ 1 [ 7.708017] bus: 'pci': add driver starfire [ 7.712140] initcall starfire_init+0x0/0x16 returned 0 after 3906 usecs [ 7.716017] calling davicom_init+0x0/0x4d @ 1 [ 7.720017] bus: 'mdio_bus': add driver Davicom DM9161E [ 7.724139] bus: 'mdio_bus': add driver Davicom DM9161A [ 7.728140] bus: 'mdio_bus': add driver Davicom DM9131 [ 7.732139] initcall davicom_init+0x0/0x4d returned 0 after 11718 usecs [ 7.736017] calling qs6612_init+0x0/0xf @ 1 [ 7.740016] bus: 'mdio_bus': add driver QS6612 [ 7.744139] initcall qs6612_init+0x0/0xf returned 0 after 3906 usecs [ 7.748017] calling vsc82xx_init+0x0/0x33 @ 1 [ 7.752026] bus: 'mdio_bus': add driver Vitesse VSC8244 [ 7.756139] bus: 'mdio_bus': add driver Vitesse VSC8221 [ 7.760139] initcall vsc82xx_init+0x0/0x33 returned 0 after 7812 usecs [ 7.764017] calling fixed_mdio_bus_init+0x0/0xae @ 1 [ 7.768020] Registering platform device 'Fixed MDIO bus.0'. Parent at platform [ 7.772016] device: 'Fixed MDIO bus.0': device_add [ 7.776025] bus: 'platform': add device Fixed MDIO bus.0 [ 7.780139] device: '0': device_add [ 7.784139] Fixed MDIO Bus: probed [ 7.788018] initcall fixed_mdio_bus_init+0x0/0xae returned 0 after 19531 usecs [ 7.792016] calling ns_init+0x0/0xf @ 1 [ 7.796017] bus: 'mdio_bus': add driver NatSemi DP83865 [ 7.800139] initcall ns_init+0x0/0xf returned 0 after 3906 usecs [ 7.804017] calling hamachi_init+0x0/0x16 @ 1 [ 7.808023] bus: 'pci': add driver hamachi [ 7.812139] initcall hamachi_init+0x0/0x16 returned 0 after 3906 usecs [ 7.816017] calling net_olddevs_init+0x0/0x18 @ 1 [ 7.820207] cs89x0:cs89x0_probe(0x0) [ 7.824019] PP_addr at 300[a]: 0xffff [ 7.828017] eth0: incorrect signature at 300[c]: 0xffff!=0x630E [ 7.832021] PP_addr at 320[a]: 0xffff [ 7.836017] eth0: incorrect signature at 320[c]: 0xffff!=0x630E [ 7.840020] PP_addr at 340[a]: 0xffff [ 7.844017] eth0: incorrect signature at 340[c]: 0xffff!=0x630E [ 7.848020] PP_addr at 360[a]: 0xffff [ 7.851650] eth0: incorrect signature at 360[c]: 0xffff!=0x630E [ 7.852020] PP_addr at 200[a]: 0xffff [ 7.856017] eth0: incorrect signature at 200[c]: 0xffff!=0x630E [ 7.860020] PP_addr at 220[a]: 0xffff [ 7.864017] eth0: incorrect signature at 220[c]: 0xffff!=0x630E [ 7.868020] PP_addr at 240[a]: 0xffff [ 7.872017] eth0: incorrect signature at 240[c]: 0xffff!=0x630E [ 7.876020] PP_addr at 260[a]: 0xffff [ 7.880017] eth0: incorrect signature at 260[c]: 0xffff!=0x630E [ 7.884020] PP_addr at 280[a]: 0xffff [ 7.888017] eth0: incorrect signature at 280[c]: 0xffff!=0x630E [ 7.892021] PP_addr at 2a0[a]: 0xffff [ 7.896019] eth0: incorrect signature at 2a0[c]: 0xffff!=0x630E [ 7.900021] PP_addr at 2c0[a]: 0xffff [ 7.904019] eth0: incorrect signature at 2c0[c]: 0xffff!=0x630E [ 7.908021] PP_addr at 2e0[a]: 0xffff [ 7.911653] eth0: incorrect signature at 2e0[c]: 0xffff!=0x630E [ 7.912027] cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP [ 7.916801] initcall net_olddevs_init+0x0/0x18 returned 0 after 93750 usecs [ 7.920017] calling hp100_module_init+0x0/0x46 @ 1 [ 7.924017] bus: 'eisa': add driver hp100 [ 7.928140] bus: 'pci': add driver hp100 [ 7.932140] initcall hp100_module_init+0x0/0x46 returned 0 after 7812 usecs [ 7.936017] calling init_nic+0x0/0x16 @ 1 [ 7.940017] bus: 'pci': add driver forcedeth [ 7.944033] bus: 'pci': driver_probe_device: matched device 0000:00:0a.0 with driver forcedeth [ 7.948016] bus: 'pci': really_probe: probing driver forcedeth with device 0000:00:0a.0 [ 7.952038] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62. [ 7.956075] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 7.960137] nv_probe: set workaround bit for reversed mac addr [ 8.484210] device: 'eth0': device_add [ 8.488550] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12 [ 8.492019] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 [ 8.496027] driver: '0000:00:0a.0': driver_bound: bound to device 'forcedeth' [ 8.500019] bus: 'pci': really_probe: bound device 0000:00:0a.0 to driver forcedeth [ 8.504140] initcall init_nic+0x0/0x16 returned 0 after 550781 usecs [ 8.508019] calling ppp_init+0x0/0x8a @ 1 [ 8.512017] PPP generic driver version 2.4.2 [ 8.516025] device class 'ppp': registering [ 8.520142] device: 'ppp': device_add [ 8.524142] initcall ppp_init+0x0/0x8a returned 0 after 11718 usecs [ 8.528018] calling ppp_async_init+0x0/0x2d @ 1 [ 8.532019] initcall ppp_async_init+0x0/0x2d returned 0 after 0 usecs [ 8.536018] calling ppp_sync_init+0x0/0x2d @ 1 [ 8.540019] initcall ppp_sync_init+0x0/0x2d returned 0 after 0 usecs [ 8.544018] calling deflate_init+0x0/0x30 @ 1 [ 8.548039] PPP Deflate Compression module registered [ 8.552019] initcall deflate_init+0x0/0x30 returned 0 after 3906 usecs [ 8.556018] calling bsdcomp_init+0x0/0x26 @ 1 [ 8.560018] PPP BSD Compression module registered [ 8.564018] initcall bsdcomp_init+0x0/0x26 returned 0 after 3906 usecs [ 8.568018] calling ppp_mppe_init+0x0/0xcf @ 1 [ 8.572226] PPP MPPE Compression module registered [ 8.576019] initcall ppp_mppe_init+0x0/0xcf returned 0 after 3906 usecs [ 8.580018] calling macvlan_init_module+0x0/0x45 @ 1 [ 8.584021] initcall macvlan_init_module+0x0/0x45 returned 0 after 0 usecs [ 8.588018] calling cp_init+0x0/0x16 @ 1 [ 8.592019] bus: 'pci': add driver 8139cp [ 8.596039] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139cp [ 8.600017] bus: 'pci': really_probe: probing driver 8139cp with device 0000:05:07.0 [ 8.604037] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 8.608019] 8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 8.612144] initcall cp_init+0x0/0x16 returned 0 after 19531 usecs [ 8.616019] calling rtl8139_init_module+0x0/0x16 @ 1 [ 8.620018] bus: 'pci': add driver 8139too [ 8.624038] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139too [ 8.628017] bus: 'pci': really_probe: probing driver 8139too with device 0000:05:07.0 [ 8.632034] 8139too Fast Ethernet driver 0.9.28 [ 8.636363] device: 'eth1': device_add [ 8.640537] eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11 [ 8.644018] eth1: Identified 8139 chip type 'RTL-8139B' [ 8.648026] driver: '0000:05:07.0': driver_bound: bound to device '8139too' [ 8.652019] bus: 'pci': really_probe: bound device 0000:05:07.0 to driver 8139too [ 8.660040] initcall rtl8139_init_module+0x0/0x16 returned 0 after 39062 usecs [ 8.664018] calling znet_probe+0x0/0x2f2 @ 1 [ 8.676260] initcall znet_probe+0x0/0x2f2 returned -19 after 7812 usecs [ 8.680018] calling sc92031_init+0x0/0x20 @ 1 [ 8.684017] Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c [ 8.688018] bus: 'pci': add driver sc92031 [ 8.692140] initcall sc92031_init+0x0/0x20 returned 0 after 7812 usecs [ 8.696019] calling rio_init+0x0/0x16 @ 1 [ 8.700019] bus: 'pci': add driver dl2k [ 8.704141] initcall rio_init+0x0/0x16 returned 0 after 3906 usecs [ 8.708019] calling rtl8169_init_module+0x0/0x16 @ 1 [ 8.712020] bus: 'pci': add driver r8169 [ 8.716140] initcall rtl8169_init_module+0x0/0x16 returned 0 after 3906 usecs [ 8.720019] calling hdlc_module_init+0x0/0x37 @ 1 [ 8.724017] HDLC support module revision 1.22 [ 8.728021] initcall hdlc_module_init+0x0/0x37 returned 0 after 3906 usecs [ 8.732018] calling mod_init+0x0/0x11 @ 1 [ 8.736019] initcall mod_init+0x0/0x11 returned 0 after 0 usecs [ 8.740025] calling mod_init+0x0/0x43 @ 1 [ 8.744019] initcall mod_init+0x0/0x43 returned 0 after 0 usecs [ 8.748018] calling init_dlci+0x0/0x2a @ 1 [ 8.752048] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org. [ 8.756019] initcall init_dlci+0x0/0x2a returned 0 after 3906 usecs [ 8.760018] calling init_sdla+0x0/0x57 @ 1 [ 8.764017] SDLA driver v0.30, 12 Sep 1996, mike.mclagan@linux.org. [ 8.768029] sdla0 (): not using net_device_ops yet [ 8.772018] device: 'sdla0': device_add [ 8.776572] initcall init_sdla+0x0/0x57 returned 0 after 11718 usecs [ 8.780019] calling c101_init+0x0/0xa4 @ 1 [ 8.784019] initcall c101_init+0x0/0xa4 returned -22 after 0 usecs [ 8.788019] initcall c101_init+0x0/0xa4 returned with error code -22 [ 8.792018] calling wanxl_init_module+0x0/0x16 @ 1 [ 8.796019] bus: 'pci': add driver wanXL [ 8.800140] initcall wanxl_init_module+0x0/0x16 returned 0 after 3906 usecs [ 8.804019] calling pc300_init_module+0x0/0x5b @ 1 [ 8.808019] bus: 'pci': add driver PC300 [ 8.812141] initcall pc300_init_module+0x0/0x5b returned 0 after 3906 usecs [ 8.816019] calling arcnet_init+0x0/0x50 @ 1 [ 8.820017] arcnet loaded. [ 8.824019] initcall arcnet_init+0x0/0x50 returned 0 after 3906 usecs [ 8.828018] calling arcnet_rfc1201_init+0x0/0x65 @ 1 [ 8.832017] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 8.836019] initcall arcnet_rfc1201_init+0x0/0x65 returned 0 after 3906 usecs [ 8.840018] calling arcnet_rfc1051_init+0x0/0x3d @ 1 [ 8.844017] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 8.848019] initcall arcnet_rfc1051_init+0x0/0x3d returned 0 after 3906 usecs [ 8.852018] calling arcnet_raw_init+0x0/0x52 @ 1 [ 8.856017] arcnet: raw mode (`r') encapsulation support loaded. [ 8.860020] initcall arcnet_raw_init+0x0/0x52 returned 0 after 3906 usecs [ 8.864018] calling arc_rimi_init+0x0/0x6f @ 1 [ 8.868038] arcnet: RIM I (entirely mem-mapped) support [ 8.872017] E-mail me if you actually test the RIM I driver, please! [ 8.876018] arc%d: Given: node 00h, shmem 0h, irq 0 [ 8.880017] arc%d: No autoprobe for RIM I; you must specify the shmem and irq! [ 8.884031] initcall arc_rimi_init+0x0/0x6f returned -5 after 15625 usecs [ 8.888019] initcall arc_rimi_init+0x0/0x6f returned with error code -5 [ 8.892018] calling pegasus_init+0x0/0x3b @ 1 [ 8.896018] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 8.900019] bus: 'usb': add driver pegasus [ 8.904140] usbcore: registered new interface driver pegasus [ 8.908024] initcall pegasus_init+0x0/0x3b returned 0 after 11718 usecs [ 8.912020] calling init_orinoco+0x0/0x16 @ 1 [ 8.916018] orinoco 0.15 (David Gibson , Pavel Roskin , et al) [ 8.920019] initcall init_orinoco+0x0/0x16 returned 0 after 3906 usecs [ 8.924019] calling init_hermes+0x0/0x7 @ 1 [ 8.928019] initcall init_hermes+0x0/0x7 returned 0 after 0 usecs [ 8.932019] calling init_hermes_dld+0x0/0x7 @ 1 [ 8.936019] initcall init_hermes_dld+0x0/0x7 returned 0 after 0 usecs [ 8.940019] calling orinoco_tmd_init+0x0/0x25 @ 1 [ 8.944017] orinoco_tmd 0.15 (Joerg Dorchain ) [ 8.948020] bus: 'pci': add driver orinoco_tmd [ 8.952141] initcall orinoco_tmd_init+0x0/0x25 returned 0 after 7812 usecs [ 8.956020] calling airo_init_module+0x0/0xce @ 1 [ 8.960032] airo(): Probing for PCI adapters [ 8.964019] bus: 'pci': add driver airo [ 8.968141] airo(): Finished probing for PCI adapters [ 8.972020] initcall airo_init_module+0x0/0xce returned 0 after 11718 usecs [ 8.976019] calling w840_init+0x0/0x20 @ 1 [ 8.980017] winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker [ 8.980021] http://www.scyld.com/network/drivers.html [ 8.984019] bus: 'pci': add driver winbond-840 [ 8.988141] initcall w840_init+0x0/0x20 returned 0 after 7812 usecs [ 8.992020] calling mkiss_init_driver+0x0/0x36 @ 1 [ 8.996028] mkiss: AX.25 Multikiss, Hans Albas PE1AYX [ 9.000020] initcall mkiss_init_driver+0x0/0x36 returned 0 after 3906 usecs [ 9.004019] calling sixpack_init_driver+0x0/0x38 @ 1 [ 9.008017] AX.25: 6pack driver, Revision: 0.3.0 [ 9.012021] initcall sixpack_init_driver+0x0/0x38 returned 0 after 3906 usecs [ 9.016019] calling yam_init_driver+0x0/0xe3 @ 1 [ 9.020017] YAM driver version 0.8 by F1OAT/F6FBB [ 9.024039] yam0 (): not using net_device_ops yet [ 9.028019] device: 'yam0': device_add [ 9.032622] yam1 (): not using net_device_ops yet [ 9.036020] device: 'yam1': device_add [ 9.044097] yam2 (): not using net_device_ops yet [ 9.048019] device: 'yam2': device_add [ 9.052698] yam3 (): not using net_device_ops yet [ 9.056020] device: 'yam3': device_add [ 9.060713] initcall yam_init_driver+0x0/0xe3 returned 0 after 39062 usecs [ 9.064020] calling init_netconsole+0x0/0x1b0 @ 1 [ 9.068233] console [netcon0] enabled [ 9.072019] netconsole: network logging started [ 9.076021] initcall init_netconsole+0x0/0x1b0 returned 0 after 7812 usecs [ 9.080019] calling zatm_init_module+0x0/0x16 @ 1 [ 9.084022] bus: 'pci': add driver zatm [ 9.088142] initcall zatm_init_module+0x0/0x16 returned 0 after 3906 usecs [ 9.092021] calling uPD98402_module_init+0x0/0x7 @ 1 [ 9.096020] initcall uPD98402_module_init+0x0/0x7 returned 0 after 0 usecs [ 9.100020] calling hrz_module_init+0x0/0xba @ 1 [ 9.104018] Madge ATM Horizon [Ultra] driver version 1.2.1 [ 9.108019] hrz: debug bitmap is 0 [ 9.112021] bus: 'pci': add driver horizon [ 9.116141] initcall hrz_module_init+0x0/0xba returned 0 after 11718 usecs [ 9.120020] calling ia_module_init+0x0/0x48 @ 1 [ 9.124021] bus: 'pci': add driver ia [ 9.128141] initcall ia_module_init+0x0/0x48 returned 0 after 3906 usecs [ 9.132021] calling eni_init+0x0/0x16 @ 1 [ 9.136020] bus: 'pci': add driver eni [ 9.140142] initcall eni_init+0x0/0x16 returned 0 after 3906 usecs [ 9.144020] calling he_init+0x0/0x16 @ 1 [ 9.148022] bus: 'pci': add driver he [ 9.152141] initcall he_init+0x0/0x16 returned 0 after 3906 usecs [ 9.156021] calling mac_hid_init+0x0/0xb3 @ 1 [ 9.160037] device: 'input0': device_add [ 9.164165] input: Macintosh mouse button emulation as /class/input/input0 [ 9.168088] initcall mac_hid_init+0x0/0xb3 returned 0 after 7812 usecs [ 9.172020] calling scsi_tgt_init+0x0/0x7d @ 1 [ 9.176262] device: 'tgt': device_add [ 9.180146] initcall scsi_tgt_init+0x0/0x7d returned 0 after 3906 usecs [ 9.184020] calling raid_init+0x0/0xf @ 1 [ 9.188020] device class 'raid_devices': registering [ 9.192142] initcall raid_init+0x0/0xf returned 0 after 3906 usecs [ 9.196021] calling spi_transport_init+0x0/0x27 @ 1 [ 9.200018] device class 'spi_transport': registering [ 9.204142] device class 'spi_host': registering [ 9.208144] initcall spi_transport_init+0x0/0x27 returned 0 after 7812 usecs [ 9.212022] calling iscsi_transport_init+0x0/0x125 @ 1 [ 9.216018] Loading iSCSI transport class v2.0-870. [ 9.220019] device class 'iscsi_transport': registering [ 9.224142] device class 'iscsi_endpoint': registering [ 9.228142] device class 'iscsi_host': registering [ 9.232141] device class 'iscsi_connection': registering [ 9.236144] device class 'iscsi_session': registering [ 9.240150] initcall iscsi_transport_init+0x0/0x125 returned 0 after 23437 usecs [ 9.244021] calling sas_transport_init+0x0/0x9f @ 1 [ 9.248019] device class 'sas_host': registering [ 9.256036] device class 'sas_phy': registering [ 9.260142] device class 'sas_port': registering [ 9.264143] device class 'sas_device': registering [ 9.268141] device class 'sas_end_device': registering [ 9.272144] device class 'sas_expander': registering [ 9.276142] initcall sas_transport_init+0x0/0x9f returned 0 after 27343 usecs [ 9.280020] calling srp_transport_init+0x0/0x33 @ 1 [ 9.284020] device class 'srp_host': registering [ 9.288142] device class 'srp_remote_ports': registering [ 9.292142] initcall srp_transport_init+0x0/0x33 returned 0 after 7812 usecs [ 9.296020] calling ahc_linux_init+0x0/0x61 @ 1 [ 9.300030] bus: 'pci': add driver aic7xxx [ 9.304142] bus: 'eisa': add driver aic7xxx [ 9.308144] initcall ahc_linux_init+0x0/0x61 returned 0 after 7812 usecs [ 9.312021] calling init_st+0x0/0xe2 @ 1 [ 9.316020] st: Version 20081215, fixed bufsize 32768, s/g segs 256 [ 9.320019] device class 'scsi_tape': registering [ 9.324142] Driver 'st' needs updating - please use bus_type methods [ 9.328019] bus: 'scsi': add driver st [ 9.332141] initcall init_st+0x0/0xe2 returned 0 after 15625 usecs [ 9.336020] calling init_osst+0x0/0x10f @ 1 [ 9.340020] osst :I: Tape driver with OnStream support version 0.99.4 [ 9.340023] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 9.344019] device class 'onstream_tape': registering [ 9.348139] Driver 'osst' needs updating - please use bus_type methods [ 9.352019] bus: 'scsi': add driver osst [ 9.356142] initcall init_osst+0x0/0x10f returned 0 after 15625 usecs [ 9.360020] calling init_sd+0x0/0xdb @ 1 [ 9.364043] device class 'scsi_disk': registering [ 9.368142] Driver 'sd' needs updating - please use bus_type methods [ 9.372020] bus: 'scsi': add driver sd [ 9.376142] initcall init_sd+0x0/0xdb returned 0 after 11718 usecs [ 9.380021] calling ahci_init+0x0/0x16 @ 1 [ 9.384021] bus: 'pci': add driver ahci [ 9.388142] initcall ahci_init+0x0/0x16 returned 0 after 3906 usecs [ 9.392020] calling k2_sata_init+0x0/0x16 @ 1 [ 9.396022] bus: 'pci': add driver sata_svw [ 9.400142] initcall k2_sata_init+0x0/0x16 returned 0 after 3906 usecs [ 9.404021] calling piix_init+0x0/0x24 @ 1 [ 9.408021] bus: 'pci': add driver ata_piix [ 9.412142] initcall piix_init+0x0/0x24 returned 0 after 3906 usecs [ 9.416020] calling qs_ata_init+0x0/0x16 @ 1 [ 9.420022] bus: 'pci': add driver sata_qstor [ 9.424142] initcall qs_ata_init+0x0/0x16 returned 0 after 3906 usecs [ 9.428022] calling sil_init+0x0/0x16 @ 1 [ 9.432021] bus: 'pci': add driver sata_sil [ 9.436146] initcall sil_init+0x0/0x16 returned 0 after 3906 usecs [ 9.440021] calling vsc_sata_init+0x0/0x16 @ 1 [ 9.444022] bus: 'pci': add driver sata_vsc [ 9.448142] initcall vsc_sata_init+0x0/0x16 returned 0 after 3906 usecs [ 9.452021] calling nv_init+0x0/0x16 @ 1 [ 9.456022] bus: 'pci': add driver sata_nv [ 9.460141] initcall nv_init+0x0/0x16 returned 0 after 3906 usecs [ 9.464020] calling uli_init+0x0/0x16 @ 1 [ 9.468022] bus: 'pci': add driver sata_uli [ 9.472142] initcall uli_init+0x0/0x16 returned 0 after 3906 usecs [ 9.476021] calling mv_init+0x0/0x3a @ 1 [ 9.480022] bus: 'pci': add driver sata_mv [ 9.484146] bus: 'platform': add driver sata_mv [ 9.488143] initcall mv_init+0x0/0x3a returned 0 after 7812 usecs [ 9.492021] calling amd_init+0x0/0x16 @ 1 [ 9.496022] bus: 'pci': add driver pata_amd [ 9.500036] bus: 'pci': driver_probe_device: matched device 0000:00:06.0 with driver pata_amd [ 9.504019] bus: 'pci': really_probe: probing driver pata_amd with device 0000:00:06.0 [ 9.508051] pata_amd 0000:00:06.0: version 0.4.1 [ 9.512169] pata_amd 0000:00:06.0: setting latency timer to 64 [ 9.516289] scsi0 : pata_amd [ 9.520301] device: 'host0': device_add [ 9.524031] device: 'host0': device_add [ 9.528152] scsi1 : pata_amd [ 9.532024] device: 'host1': device_add [ 9.536029] device: 'host1': device_add [ 9.540146] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 9.544020] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 9.720318] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100 [ 9.728023] ata1.00: 488397168 sectors, multi 1: LBA48 [ 9.732049] ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0 [ 9.764244] ata1.00: configured for UDMA/100 [ 9.768028] async_waiting @ 12 [ 9.772029] async_continuing @ 12 after 0 usec [ 9.776342] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 [ 9.780023] device: 'target0:0:0': device_add [ 9.784030] device: '0:0:0:0': device_add [ 9.788069] bus: 'scsi': add device 0:0:0:0 [ 9.792148] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver st [ 9.796021] bus: 'scsi': really_probe: probing driver st with device 0:0:0:0 [ 9.800051] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver osst [ 9.804020] bus: 'scsi': really_probe: probing driver osst with device 0:0:0:0 [ 9.808047] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd [ 9.812027] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0 [ 9.816137] device: '0:0:0:0': device_add [ 9.820170] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [ 9.824084] sd 0:0:0:0: [sda] Write Protect is off [ 9.828021] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.832136] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.836028] device: 'sda': device_add [ 9.840273] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [ 9.844081] sd 0:0:0:0: [sda] Write Protect is off [ 9.848020] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.852134] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.856041] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 9.940765] device: 'sda1': device_add [ 9.944084] device: 'sda2': device_add [ 9.948080] device: 'sda3': device_add [ 9.952089] device: 'sda5': device_add [ 9.956027] device: 'sda6': device_add [ 9.959755] device: 'sda7': device_add [ 9.960092] device: 'sda8': device_add [ 9.964093] device: 'sda9': device_add [ 9.968090] device: 'sda10': device_add [ 9.976209] device: '8:0': device_add [ 9.980148] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.984021] driver: '0:0:0:0': driver_bound: bound to device 'sd' [ 9.988107] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd [ 9.992022] device: '0:0:0:0': device_add [ 9.996159] device: '0:0:0:0': device_add [ 10.000143] async_waiting @ 12 [ 10.004218] async_continuing @ 12 after 0 usec [ 10.176313] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66 [ 10.184048] ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0 [ 10.208226] ata2.01: configured for UDMA/33 [ 10.216035] async_waiting @ 12 [ 10.218946] async_continuing @ 12 after 0 usec [ 10.220182] scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5 [ 10.224027] device: 'target1:0:1': device_add [ 10.228034] device: '1:0:1:0': device_add [ 10.232069] bus: 'scsi': add device 1:0:1:0 [ 10.236147] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver st [ 10.240020] bus: 'scsi': really_probe: probing driver st with device 1:0:1:0 [ 10.244050] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver osst [ 10.248020] bus: 'scsi': really_probe: probing driver osst with device 1:0:1:0 [ 10.252047] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sd [ 10.256020] bus: 'scsi': really_probe: probing driver sd with device 1:0:1:0 [ 10.260047] device: '1:0:1:0': device_add [ 10.264143] device: '1:0:1:0': device_add [ 10.268152] driver: '0000:00:06.0': driver_bound: bound to device 'pata_amd' [ 10.272022] bus: 'pci': really_probe: bound device 0000:00:06.0 to driver pata_amd [ 10.276144] initcall amd_init+0x0/0x16 returned 0 after 761720 usecs [ 10.280023] calling cs5535_init+0x0/0x16 @ 1 [ 10.284027] bus: 'pci': add driver cs5535 [ 10.288143] initcall cs5535_init+0x0/0x16 returned 0 after 3906 usecs [ 10.292023] calling efar_init+0x0/0x16 @ 1 [ 10.296024] bus: 'pci': add driver pata_efar [ 10.300144] initcall efar_init+0x0/0x16 returned 0 after 3906 usecs [ 10.304022] calling jmicron_init+0x0/0x16 @ 1 [ 10.308025] bus: 'pci': add driver pata_jmicron [ 10.312143] initcall jmicron_init+0x0/0x16 returned 0 after 3906 usecs [ 10.316023] calling oldpiix_init+0x0/0x16 @ 1 [ 10.320024] bus: 'pci': add driver pata_oldpiix [ 10.324143] initcall oldpiix_init+0x0/0x16 returned 0 after 3906 usecs [ 10.328022] calling pdc202xx_init+0x0/0x16 @ 1 [ 10.332025] bus: 'pci': add driver pata_pdc202xx_old [ 10.336143] initcall pdc202xx_init+0x0/0x16 returned 0 after 3906 usecs [ 10.340023] calling rz1000_init+0x0/0x16 @ 1 [ 10.344024] bus: 'pci': add driver pata_rz1000 [ 10.352044] initcall rz1000_init+0x0/0x16 returned 0 after 7812 usecs [ 10.356023] calling serverworks_init+0x0/0x16 @ 1 [ 10.360024] bus: 'pci': add driver pata_serverworks [ 10.368143] initcall serverworks_init+0x0/0x16 returned 0 after 7812 usecs [ 10.372023] calling sil680_init+0x0/0x16 @ 1 [ 10.376024] bus: 'pci': add driver pata_sil680 [ 10.380143] initcall sil680_init+0x0/0x16 returned 0 after 3906 usecs [ 10.384022] calling via_init+0x0/0x16 @ 1 [ 10.388025] bus: 'pci': add driver pata_via [ 10.392143] initcall via_init+0x0/0x16 returned 0 after 3906 usecs [ 10.396024] calling winbond_init+0x0/0xca @ 1 [ 10.400022] initcall winbond_init+0x0/0xca returned -19 after 0 usecs [ 10.404022] calling ata_generic_init+0x0/0x16 @ 1 [ 10.408024] bus: 'pci': add driver ata_generic [ 10.412144] initcall ata_generic_init+0x0/0x16 returned 0 after 3906 usecs [ 10.416023] calling legacy_init+0x0/0x1e5 @ 1 [ 10.420171] initcall legacy_init+0x0/0x1e5 returned -19 after 0 usecs [ 10.424022] calling fusion_init+0x0/0x10c @ 1 [ 10.428022] Fusion MPT base driver 3.04.07 [ 10.432020] Copyright (c) 1999-2008 LSI Corporation [ 10.436051] initcall fusion_init+0x0/0x10c returned 0 after 7812 usecs [ 10.440022] calling mptspi_init+0x0/0xb9 @ 1 [ 10.444022] Fusion MPT SPI Host driver 3.04.07 [ 10.448041] bus: 'pci': add driver mptspi [ 10.452144] initcall mptspi_init+0x0/0xb9 returned 0 after 7812 usecs [ 10.456023] calling fw_core_init+0x0/0x9b @ 1 [ 10.460144] bus: 'firewire': registered [ 10.464090] initcall fw_core_init+0x0/0x9b returned 0 after 3906 usecs [ 10.468023] calling uio_init+0x0/0x7 @ 1 [ 10.472031] initcall uio_init+0x0/0x7 returned 0 after 0 usecs [ 10.476023] calling uio_pdrv_init+0x0/0xf @ 1 [ 10.480022] bus: 'platform': add driver uio_pdrv [ 10.484143] initcall uio_pdrv_init+0x0/0xf returned 0 after 3906 usecs [ 10.488023] calling sercos3_init_module+0x0/0x16 @ 1 [ 10.492026] bus: 'pci': add driver sercos3 [ 10.496144] initcall sercos3_init_module+0x0/0x16 returned 0 after 3906 usecs [ 10.500024] calling aoe_init+0x0/0x9d @ 1 [ 10.504030] device class 'aoe': registering [ 10.508144] device: 'err': device_add [ 10.512147] device: 'discover': device_add [ 10.516143] device: 'interfaces': device_add [ 10.520111] device: 'revalidate': device_add [ 10.524143] device: 'flush': device_add [ 10.528277] aoe: AoE v47 initialised. [ 10.532170] initcall aoe_init+0x0/0x9d returned 0 after 27343 usecs [ 10.536022] calling uwb_subsys_init+0x0/0x46 @ 1 [ 10.540050] device class 'uwb_rc': registering [ 10.544145] initcall uwb_subsys_init+0x0/0x46 returned 0 after 3906 usecs [ 10.548024] calling hwarc_driver_init+0x0/0x16 @ 1 [ 10.552023] bus: 'usb': add driver hwa-rc [ 10.556145] usbcore: registered new interface driver hwa-rc [ 10.560027] initcall hwarc_driver_init+0x0/0x16 returned 0 after 7812 usecs [ 10.564023] calling mon_init+0x0/0xef @ 1 [ 10.572025] device class 'usbmon': registering [ 10.576145] device: 'usbmon0': device_add [ 10.580144] initcall mon_init+0x0/0xef returned 0 after 11718 usecs [ 10.584023] calling ehci_hcd_init+0x0/0xbe @ 1 [ 10.588022] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.592021] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 [ 10.596035] bus: 'pci': add driver ehci_hcd [ 10.600035] bus: 'pci': driver_probe_device: matched device 0000:00:02.1 with driver ehci_hcd [ 10.604022] bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:02.1 [ 10.608072] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table [ 10.612025] ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup! [ 10.616032] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19 [ 10.620145] initcall ehci_hcd_init+0x0/0xbe returned 0 after 31250 usecs [ 10.624023] calling ohci_hcd_mod_init+0x0/0x93 @ 1 [ 10.628022] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 10.632020] ohci_hcd: block sizes: ed 64 td 64 [ 10.636034] bus: 'pci': add driver ohci_hcd [ 10.640033] bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver ohci_hcd [ 10.644022] bus: 'pci': really_probe: probing driver ohci_hcd with device 0000:00:02.0 [ 10.648065] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table [ 10.652023] ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup! [ 10.656031] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19 [ 10.664044] initcall ohci_hcd_mod_init+0x0/0x93 returned 0 after 35156 usecs [ 10.668023] calling uhci_hcd_init+0x0/0x106 @ 1 [ 10.672021] uhci_hcd: USB Universal Host Controller Interface driver [ 10.676269] bus: 'pci': add driver uhci_hcd [ 10.680145] initcall uhci_hcd_init+0x0/0x106 returned 0 after 7812 usecs [ 10.684024] calling hwahc_driver_init+0x0/0x16 @ 1 [ 10.688022] bus: 'usb': add driver hwa-hc [ 10.692145] usbcore: registered new interface driver hwa-hc [ 10.696038] initcall hwahc_driver_init+0x0/0x16 returned 0 after 7812 usecs [ 10.700024] calling wusbcore_init+0x0/0x6c @ 1 [ 10.704143] initcall wusbcore_init+0x0/0x6c returned 0 after 0 usecs [ 10.708024] calling usb_usual_init+0x0/0x32 @ 1 [ 10.712057] bus: 'usb': add driver libusual [ 10.716149] usbcore: registered new interface driver libusual [ 10.720028] initcall usb_usual_init+0x0/0x32 returned 0 after 7812 usecs [ 10.724023] calling microtek_drv_init+0x0/0x16 @ 1 [ 10.728033] bus: 'usb': add driver microtekX6 [ 10.736143] usbcore: registered new interface driver microtekX6 [ 10.740028] initcall microtek_drv_init+0x0/0x16 returned 0 after 11718 usecs [ 10.744022] calling usb_serial_init+0x0/0x1cc @ 1 [ 10.748147] bus: 'usb-serial': registered [ 10.752045] bus: 'usb': add driver usbserial [ 10.756143] usbcore: registered new interface driver usbserial [ 10.760023] bus: 'usb-serial': add driver generic [ 10.764147] USB Serial support registered for generic [ 10.768022] bus: 'usb': add driver usbserial_generic [ 10.772144] usbcore: registered new interface driver usbserial_generic [ 10.776021] usbserial: USB Serial Driver core [ 10.780025] initcall usb_serial_init+0x0/0x1cc returned 0 after 31250 usecs [ 10.784023] calling aircable_init+0x0/0x3a @ 1 [ 10.788023] bus: 'usb-serial': add driver aircable [ 10.792147] USB Serial support registered for aircable [ 10.796024] bus: 'usb': add driver aircable [ 10.800144] usbcore: registered new interface driver aircable [ 10.804026] initcall aircable_init+0x0/0x3a returned 0 after 15625 usecs [ 10.808023] calling ark3116_init+0x0/0x3a @ 1 [ 10.812025] bus: 'usb-serial': add driver ark3116 [ 10.816147] USB Serial support registered for ark3116 [ 10.820029] bus: 'usb': add driver ark3116 [ 10.824144] usbcore: registered new interface driver ark3116 [ 10.828025] initcall ark3116_init+0x0/0x3a returned 0 after 15625 usecs [ 10.832023] calling belkin_sa_init+0x0/0x49 @ 1 [ 10.836023] bus: 'usb-serial': add driver belkin [ 10.840147] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 10.844024] bus: 'usb': add driver belkin [ 10.848144] usbcore: registered new interface driver belkin [ 10.852022] belkin_sa: v1.2:USB Belkin Serial converter driver [ 10.856023] initcall belkin_sa_init+0x0/0x49 returned 0 after 19531 usecs [ 10.860024] calling cp2101_init+0x0/0x49 @ 1 [ 10.864022] bus: 'usb-serial': add driver cp2101 [ 10.868147] USB Serial support registered for cp2101 [ 10.872023] bus: 'usb': add driver cp2101 [ 10.876144] usbcore: registered new interface driver cp2101 [ 10.880022] cp2101: v0.07:Silicon Labs CP2101/CP2102 RS232 serial adaptor driver [ 10.884024] initcall cp2101_init+0x0/0x49 returned 0 after 19531 usecs [ 10.888023] calling cypress_init+0x0/0x9d @ 1 [ 10.892023] drivers/usb/serial/cypress_m8.c: cypress_init [ 10.896022] bus: 'usb-serial': add driver earthmate [ 10.900147] USB Serial support registered for DeLorme Earthmate USB [ 10.904023] bus: 'usb-serial': add driver cyphidcom [ 10.908144] USB Serial support registered for HID->COM RS232 Adapter [ 10.912024] bus: 'usb-serial': add driver nokiaca42v2 [ 10.916148] USB Serial support registered for Nokia CA-42 V2 Adapter [ 10.920023] bus: 'usb': add driver cypress [ 10.924144] usbcore: registered new interface driver cypress [ 10.928021] cypress_m8: v1.09:Cypress USB to Serial Driver [ 10.932025] initcall cypress_init+0x0/0x9d returned 0 after 39062 usecs [ 10.936023] calling debug_init+0x0/0x3a @ 1 [ 10.940024] bus: 'usb-serial': add driver debug [ 10.944147] USB Serial support registered for debug [ 10.948024] bus: 'usb': add driver debug [ 10.952192] usbcore: registered new interface driver debug [ 10.956025] initcall debug_init+0x0/0x3a returned 0 after 15625 usecs [ 10.960023] calling edgeport_init+0x0/0xa5 @ 1 [ 10.964024] bus: 'usb-serial': add driver edgeport_2 [ 10.968148] USB Serial support registered for Edgeport 2 port adapter [ 10.972024] bus: 'usb-serial': add driver edgeport_4 [ 10.976144] USB Serial support registered for Edgeport 4 port adapter [ 10.980024] bus: 'usb-serial': add driver edgeport_8 [ 10.984148] USB Serial support registered for Edgeport 8 port adapter [ 10.988024] bus: 'usb-serial': add driver epic [ 10.992144] USB Serial support registered for EPiC device [ 10.996024] bus: 'usb': add driver io_edgeport [ 11.000147] usbcore: registered new interface driver io_edgeport [ 11.004023] io_edgeport: v2.7:Edgeport USB Serial Driver [ 11.008024] initcall edgeport_init+0x0/0xa5 returned 0 after 42968 usecs [ 11.012025] calling usb_ipw_init+0x0/0x49 @ 1 [ 11.016023] bus: 'usb-serial': add driver ipw [ 11.020144] USB Serial support registered for IPWireless converter [ 11.024023] bus: 'usb': add driver ipwtty [ 11.028148] usbcore: registered new interface driver ipwtty [ 11.032022] ipw: v0.3:IPWireless tty driver [ 11.036025] initcall usb_ipw_init+0x0/0x49 returned 0 after 19531 usecs [ 11.040023] calling ir_init+0x0/0x49 @ 1 [ 11.044024] bus: 'usb-serial': add driver ir-usb [ 11.048144] USB Serial support registered for IR Dongle [ 11.052024] bus: 'usb': add driver ir-usb [ 11.060039] usbcore: registered new interface driver ir-usb [ 11.064022] ir_usb: v0.4:USB IR Dongle driver [ 11.068025] initcall ir_init+0x0/0x49 returned 0 after 23437 usecs [ 11.072023] calling keyspan_pda_init+0x0/0x7d @ 1 [ 11.076024] bus: 'usb-serial': add driver keyspan_pda [ 11.080145] USB Serial support registered for Keyspan PDA [ 11.084024] bus: 'usb-serial': add driver keyspan_pda_pre [ 11.088146] USB Serial support registered for Keyspan PDA - (prerenumeration) [ 11.092024] bus: 'usb-serial': add driver xircom_no_firm [ 11.096145] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) [ 11.100024] bus: 'usb': add driver keyspan_pda [ 11.104146] usbcore: registered new interface driver keyspan_pda [ 11.108024] keyspan_pda: v1.1:USB Keyspan PDA Converter driver [ 11.112025] initcall keyspan_pda_init+0x0/0x7d returned 0 after 35156 usecs [ 11.116024] calling moto_init+0x0/0x3a @ 1 [ 11.120023] bus: 'usb-serial': add driver moto-modem [ 11.124145] USB Serial support registered for moto-modem [ 11.128024] bus: 'usb': add driver moto-modem [ 11.132146] usbcore: registered new interface driver moto-modem [ 11.136025] initcall moto_init+0x0/0x3a returned 0 after 15625 usecs [ 11.140024] calling omninet_init+0x0/0x49 @ 1 [ 11.144023] bus: 'usb-serial': add driver omninet [ 11.148145] USB Serial support registered for ZyXEL - omni.net lcd plus usb [ 11.152024] bus: 'usb': add driver omninet [ 11.160146] usbcore: registered new interface driver omninet [ 11.164023] omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver [ 11.168024] initcall omninet_init+0x0/0x49 returned 0 after 23437 usecs [ 11.172024] calling oti6858_init+0x0/0x3a @ 1 [ 11.176023] bus: 'usb-serial': add driver oti6858 [ 11.180124] USB Serial support registered for oti6858 [ 11.184024] bus: 'usb': add driver oti6858 [ 11.188146] usbcore: registered new interface driver oti6858 [ 11.192025] initcall oti6858_init+0x0/0x3a returned 0 after 15625 usecs [ 11.196024] calling safe_init+0x0/0xb4 @ 1 [ 11.200021] safe_serial: v0.0b:USB Safe Encapsulated Serial [ 11.204024] bus: 'usb-serial': add driver safe_serial [ 11.208145] USB Serial support registered for safe_serial [ 11.212026] bus: 'usb': add driver safe_serial [ 11.216146] usbcore: registered new interface driver safe_serial [ 11.220026] initcall safe_init+0x0/0xb4 returned 0 after 19531 usecs [ 11.224023] calling spcp8x5_init+0x0/0x49 @ 1 [ 11.228024] bus: 'usb-serial': add driver SPCP8x5 [ 11.232145] USB Serial support registered for SPCP8x5 [ 11.236025] bus: 'usb': add driver spcp8x5 [ 11.240146] usbcore: registered new interface driver spcp8x5 [ 11.244023] spcp8x5: v0.04:SPCP8x5 USB to serial adaptor driver [ 11.248024] initcall spcp8x5_init+0x0/0x49 returned 0 after 19531 usecs [ 11.252024] calling ti_init+0x0/0x130 @ 1 [ 11.256024] bus: 'usb-serial': add driver ti_usb_3410_5052_1 [ 11.260145] USB Serial support registered for TI USB 3410 1 port adapter [ 11.264024] bus: 'usb-serial': add driver ti_usb_3410_5052_2 [ 11.268146] USB Serial support registered for TI USB 5052 2 port adapter [ 11.272024] bus: 'usb': add driver ti_usb_3410_5052 [ 11.276145] usbcore: registered new interface driver ti_usb_3410_5052 [ 11.280022] ti_usb_3410_5052: v0.9:TI USB 3410/5052 Serial Driver [ 11.284025] initcall ti_init+0x0/0x130 returned 0 after 27343 usecs [ 11.288023] calling whiteheat_init+0x0/0x63 @ 1 [ 11.292024] bus: 'usb-serial': add driver whiteheatnofirm [ 11.296146] USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) [ 11.300025] bus: 'usb-serial': add driver whiteheat [ 11.304145] USB Serial support registered for Connect Tech - WhiteHEAT [ 11.308026] bus: 'usb': add driver whiteheat [ 11.312146] usbcore: registered new interface driver whiteheat [ 11.316024] whiteheat: v2.0:USB ConnectTech WhiteHEAT driver [ 11.320024] initcall whiteheat_init+0x0/0x63 returned 0 after 27343 usecs [ 11.324024] calling appledisplay_init+0x0/0x51 @ 1 [ 11.328092] bus: 'usb': add driver appledisplay [ 11.332148] usbcore: registered new interface driver appledisplay [ 11.336028] initcall appledisplay_init+0x0/0x51 returned 0 after 7812 usecs [ 11.340024] calling berry_init+0x0/0x16 @ 1 [ 11.344024] bus: 'usb': add driver berry_charge [ 11.348110] usbcore: registered new interface driver berry_charge [ 11.352028] initcall berry_init+0x0/0x16 returned 0 after 7812 usecs [ 11.356024] calling emi26_init+0x0/0x16 @ 1 [ 11.360024] bus: 'usb': add driver emi26 - firmware loader [ 11.364147] usbcore: registered new interface driver emi26 - firmware loader [ 11.368028] initcall emi26_init+0x0/0x16 returned 0 after 7812 usecs [ 11.372024] calling ld_usb_init+0x0/0x2f @ 1 [ 11.376024] bus: 'usb': add driver ldusb [ 11.380146] usbcore: registered new interface driver ldusb [ 11.384028] initcall ld_usb_init+0x0/0x2f returned 0 after 7812 usecs [ 11.388024] calling lego_usb_tower_init+0x0/0x75 @ 1 [ 11.392022] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: enter [ 11.396024] bus: 'usb': add driver legousbtower [ 11.400145] usbcore: registered new interface driver legousbtower [ 11.404027] legousbtower: v0.96:LEGO USB Tower Driver [ 11.408022] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: leave, return value 0 [ 11.412026] initcall lego_usb_tower_init+0x0/0x75 returned 0 after 19531 usecs [ 11.416023] calling tv_init+0x0/0x3c @ 1 [ 11.420025] bus: 'usb': add driver trancevibrator [ 11.424146] usbcore: registered new interface driver trancevibrator [ 11.428027] trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver [ 11.432024] initcall tv_init+0x0/0x3c returned 0 after 11718 usecs [ 11.436025] calling usb_sevseg_init+0x0/0x2f @ 1 [ 11.440024] bus: 'usb': add driver usbsevseg [ 11.444145] usbcore: registered new interface driver usbsevseg [ 11.452033] initcall usb_sevseg_init+0x0/0x2f returned 0 after 11718 usecs [ 11.456024] calling vstusb_init+0x0/0x35 @ 1 [ 11.460025] bus: 'usb': add driver vstusb [ 11.464158] usbcore: registered new interface driver vstusb [ 11.468031] initcall vstusb_init+0x0/0x35 returned 0 after 7812 usecs [ 11.472024] calling i8042_init+0x0/0xf7 @ 1 [ 11.476027] bus: 'pnp': add driver i8042 kbd [ 11.480038] bus: 'pnp': driver_probe_device: matched device 00:04 with driver i8042 kbd [ 11.484024] bus: 'pnp': really_probe: probing driver i8042 kbd with device 00:04 [ 11.488037] driver: '00:04': driver_bound: bound to device 'i8042 kbd' [ 11.492024] bus: 'pnp': really_probe: bound device 00:04 to driver i8042 kbd [ 11.496145] bus: 'pnp': add driver i8042 aux [ 11.500146] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 [ 11.504022] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 11.508078] bus: 'platform': add driver i8042 [ 11.512146] Registering platform device 'i8042'. Parent at platform [ 11.516024] device: 'i8042': device_add [ 11.520033] bus: 'platform': add device i8042 [ 11.524145] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042 [ 11.528023] bus: 'platform': really_probe: probing driver i8042 with device i8042 [ 11.532395] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.536031] driver: 'i8042': driver_bound: bound to device 'i8042' [ 11.536028] device: 'serio0': device_add [ 11.536059] bus: 'serio': add device serio0 [ 11.540024] bus: 'platform': really_probe: bound device i8042 to driver i8042 [ 11.544027] initcall i8042_init+0x0/0xf7 returned 0 after 66406 usecs [ 11.548024] calling l4_init+0x0/0x7c @ 1 [ 11.552038] initcall l4_init+0x0/0x7c returned -19 after 0 usecs [ 11.556024] calling ns558_init+0x0/0x4e @ 1 [ 11.560023] bus: 'pnp': add driver ns558 [ 11.564065] bus: 'pnp': driver_probe_device: matched device 00:10 with driver ns558 [ 11.568023] bus: 'pnp': really_probe: probing driver ns558 with device 00:10 [ 11.572050] driver: '00:10': driver_bound: bound to device 'ns558' [ 11.576023] bus: 'pnp': really_probe: bound device 00:10 to driver ns558 [ 11.584011] gameport: NS558 PnP Gameport is pnp00:10/gameport0, io 0x201, speed 662kHz [ 11.592066] device: 'gameport0': device_add [ 11.595201] initcall ns558_init+0x0/0x4e returned 0 after 31250 usecs [ 11.595206] calling mousedev_init+0x0/0x78 @ 1 [ 11.595236] device: 'mice': device_add [ 11.612035] bus: 'gameport': add device gameport0 [ 11.628085] device: 'mouse0': device_add [ 11.632082] device: 'psaux': device_add [ 11.636046] mice: PS/2 mouse device common for all mice [ 11.640025] initcall mousedev_init+0x0/0x78 returned 0 after 46875 usecs [ 11.644042] calling joydev_init+0x0/0xf @ 1 [ 11.648025] initcall joydev_init+0x0/0xf returned 0 after 0 usecs [ 11.652024] calling evdev_init+0x0/0xf @ 1 [ 11.672036] device: 'event0': device_add [ 11.676050] initcall evdev_init+0x0/0xf returned 0 after 19531 usecs [ 11.680023] calling atkbd_init+0x0/0x20 @ 1 [ 11.684028] bus: 'serio': add driver atkbd [ 11.688160] initcall atkbd_init+0x0/0x20 returned 0 after 3906 usecs [ 11.688160] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd [ 11.688160] bus: 'serio': really_probe: probing driver atkbd with device serio0 [ 11.692025] calling lkkbd_init+0x0/0x16 @ 1 [ 11.692056] device: 'input1': device_add [ 11.696024] bus: 'serio': add driver lkkbd [ 11.700151] input: AT Translated Set 2 keyboard as /class/input/input1 [ 11.704134] initcall lkkbd_init+0x0/0x16 returned 0 after 7812 usecs [ 11.708025] calling bcm5974_init+0x0/0x16 @ 1 [ 11.712027] bus: 'usb': add driver bcm5974 [ 11.716175] usbcore: registered new interface driver bcm5974 [ 11.720029] initcall bcm5974_init+0x0/0x16 returned 0 after 7812 usecs [ 11.724024] calling logibm_init+0x0/0x12c @ 1 [ 11.728126] logibm.c: Didn't find Logitech busmouse at 0x23c [ 11.732027] initcall logibm_init+0x0/0x12c returned -19 after 3906 usecs [ 11.736023] calling adi_init+0x0/0x16 @ 1 [ 11.740024] bus: 'gameport': add driver adi [ 11.744155] initcall adi_init+0x0/0x16 returned 0 after 3906 usecs [ 11.748025] calling gf2k_init+0x0/0x16 @ 1 [ 11.752034] bus: 'gameport': add driver gf2k [ 11.756156] initcall gf2k_init+0x0/0x16 returned 0 after 3906 usecs [ 11.760024] calling iforce_init+0x0/0x41 @ 1 [ 11.764026] bus: 'usb': add driver iforce [ 11.768166] usbcore: registered new interface driver iforce [ 11.772029] bus: 'serio': add driver iforce [ 11.772078] device: 'event1': device_add [ 11.776156] driver: 'serio0': driver_bound: bound to device 'atkbd' [ 11.784068] bus: 'serio': really_probe: bound device serio0 to driver atkbd [ 11.788117] initcall iforce_init+0x0/0x41 returned 0 after 23437 usecs [ 11.792024] calling interact_init+0x0/0x16 @ 1 [ 11.796024] bus: 'gameport': add driver interact [ 11.800166] initcall interact_init+0x0/0x16 returned 0 after 3906 usecs [ 11.804026] calling joydump_init+0x0/0x16 @ 1 [ 11.808024] bus: 'gameport': add driver joydump [ 11.812155] initcall joydump_init+0x0/0x16 returned 0 after 3906 usecs [ 11.816024] calling magellan_init+0x0/0x16 @ 1 [ 11.820025] bus: 'serio': add driver magellan [ 11.824168] initcall magellan_init+0x0/0x16 returned 0 after 3906 usecs [ 11.828026] calling spaceball_init+0x0/0x16 @ 1 [ 11.832024] bus: 'serio': add driver spaceball [ 11.836158] initcall spaceball_init+0x0/0x16 returned 0 after 3906 usecs [ 11.840024] calling warrior_init+0x0/0x16 @ 1 [ 11.844025] bus: 'serio': add driver warrior [ 11.848158] initcall warrior_init+0x0/0x16 returned 0 after 3906 usecs [ 11.852025] calling usb_xpad_init+0x0/0x2d @ 1 [ 11.856026] bus: 'usb': add driver xpad [ 11.860171] usbcore: registered new interface driver xpad [ 11.864036] xpad: X-Box pad driver [ 11.868026] initcall usb_xpad_init+0x0/0x2d returned 0 after 11718 usecs [ 11.872024] calling zhenhua_init+0x0/0x16 @ 1 [ 11.876025] bus: 'serio': add driver zhenhua [ 11.880157] initcall zhenhua_init+0x0/0x16 returned 0 after 3906 usecs [ 11.884025] calling usb_acecad_init+0x0/0x2d @ 1 [ 11.888026] bus: 'usb': add driver usb_acecad [ 11.892153] usbcore: registered new interface driver usb_acecad [ 11.896027] acecad: v3.2:USB Acecad Flair tablet driver [ 11.900026] initcall usb_acecad_init+0x0/0x2d returned 0 after 11718 usecs [ 11.904024] calling elo_init+0x0/0x16 @ 1 [ 11.908025] bus: 'serio': add driver elo [ 11.912158] initcall elo_init+0x0/0x16 returned 0 after 3906 usecs [ 11.916026] calling fujitsu_init+0x0/0x16 @ 1 [ 11.920024] bus: 'serio': add driver fujitsu_ts [ 11.924156] initcall fujitsu_init+0x0/0x16 returned 0 after 3906 usecs [ 11.928024] calling mk712_init+0x0/0x1b7 @ 1 [ 11.932028] mk712: device not present [ 11.936027] initcall mk712_init+0x0/0x1b7 returned -19 after 3906 usecs [ 11.940025] calling tw_init+0x0/0x16 @ 1 [ 11.944024] bus: 'serio': add driver touchwin [ 11.948158] initcall tw_init+0x0/0x16 returned 0 after 3906 usecs [ 11.952025] calling yealink_dev_init+0x0/0x2d @ 1 [ 11.956027] bus: 'usb': add driver yealink [ 11.960152] usbcore: registered new interface driver yealink [ 11.964028] yealink: yld-20051230:Yealink phone driver [ 11.968025] initcall yealink_dev_init+0x0/0x2d returned 0 after 11718 usecs [ 11.972025] calling cm109_init+0x0/0x38 @ 1 [ 11.976023] cm109: Keymap for Komunikate KIP1000 phone loaded [ 11.980026] bus: 'usb': add driver cm109 [ 11.984170] usbcore: registered new interface driver cm109 [ 11.988028] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad [ 11.992025] initcall cm109_init+0x0/0x38 returned 0 after 15625 usecs [ 11.996025] calling ds1286_init+0x0/0xf @ 1 [ 12.000025] bus: 'platform': add driver rtc-ds1286 [ 12.004162] initcall ds1286_init+0x0/0xf returned 0 after 3906 usecs [ 12.008033] calling ds1553_init+0x0/0xf @ 1 [ 12.012026] bus: 'platform': add driver rtc-ds1553 [ 12.016149] initcall ds1553_init+0x0/0xf returned 0 after 3906 usecs [ 12.020026] calling m48t35_init+0x0/0xf @ 1 [ 12.024024] bus: 'platform': add driver rtc-m48t35 [ 12.028149] initcall m48t35_init+0x0/0xf returned 0 after 3906 usecs [ 12.032025] calling m48t59_rtc_init+0x0/0xf @ 1 [ 12.036026] bus: 'platform': add driver rtc-m48t59 [ 12.040149] initcall m48t59_rtc_init+0x0/0xf returned 0 after 3906 usecs [ 12.044026] calling test_init+0x0/0x98 @ 1 [ 12.048024] bus: 'platform': add driver rtc-test [ 12.052149] Registering platform device 'rtc-test.0'. Parent at platform [ 12.056024] device: 'rtc-test.0': device_add [ 12.060035] bus: 'platform': add device rtc-test.0 [ 12.064146] bus: 'platform': driver_probe_device: matched device rtc-test.0 with driver rtc-test [ 12.068026] bus: 'platform': really_probe: probing driver rtc-test with device rtc-test.0 [ 12.072126] device: 'rtc0': device_add [ 12.076186] test: dev (254:0) [ 12.078937] rtc-test rtc-test.0: rtc core: registered test as rtc0 [ 12.080028] driver: 'rtc-test.0': driver_bound: bound to device 'rtc-test' [ 12.084025] bus: 'platform': really_probe: bound device rtc-test.0 to driver rtc-test [ 12.088026] Registering platform device 'rtc-test.1'. Parent at platform [ 12.092024] device: 'rtc-test.1': device_add [ 12.096032] bus: 'platform': add device rtc-test.1 [ 12.100147] bus: 'platform': driver_probe_device: matched device rtc-test.1 with driver rtc-test [ 12.104024] bus: 'platform': really_probe: probing driver rtc-test with device rtc-test.1 [ 12.108040] device: 'rtc1': device_add [ 12.112193] test: dev (254:1) [ 12.116026] rtc-test rtc-test.1: rtc core: registered test as rtc1 [ 12.120027] driver: 'rtc-test.1': driver_bound: bound to device 'rtc-test' [ 12.124025] bus: 'platform': really_probe: bound device rtc-test.1 to driver rtc-test [ 12.128066] initcall test_init+0x0/0x98 returned 0 after 78125 usecs [ 12.132025] calling v3020_init+0x0/0xf @ 1 [ 12.136024] bus: 'platform': add driver v3020 [ 12.144080] initcall v3020_init+0x0/0xf returned 0 after 7812 usecs [ 12.148026] calling telephony_init+0x0/0x3f @ 1 [ 12.152023] Linux telephony interface: v1.00 [ 12.156033] initcall telephony_init+0x0/0x3f returned 0 after 3906 usecs [ 12.160024] calling dm_init+0x0/0x38 @ 1 [ 12.164323] device: 'device-mapper': device_add [ 12.168167] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 12.172027] initcall dm_init+0x0/0x38 returned 0 after 7812 usecs [ 12.176025] calling dm_delay_init+0x0/0xad @ 1 [ 12.180362] initcall dm_delay_init+0x0/0xad returned 0 after 0 usecs [ 12.184025] calling edac_init+0x0/0xcb @ 1 [ 12.188025] EDAC MC: Ver: 2.1.0 Mar 18 2009 [ 12.192031] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.196040] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.200037] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.204038] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.208037] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.212039] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.216037] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.220038] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.224041] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.228038] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.232041] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.236042] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.240041] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.244042] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.248037] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.252037] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.256037] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.260037] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.264048] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.268038] EDAC DEBUG: edac_pci_dev_parity_clear() [ 12.272037] Registering sysdev class 'edac' [ 12.276137] EDAC DEBUG: edac_sysfs_setup_mc_kset() [ 12.280142] EDAC DEBUG: edac_sysfs_setup_mc_kset() Registered '.../edac/mc' kobject [ 12.284092] initcall edac_init+0x0/0xcb returned 0 after 93750 usecs [ 12.288025] calling i5000_init+0x0/0x50 @ 1 [ 12.292025] EDAC DEBUG: MC: drivers/edac/i5000_edac.c: i5000_init() [ 12.296031] bus: 'pci': add driver i5000_edac [ 12.300195] initcall i5000_init+0x0/0x50 returned 0 after 7812 usecs [ 12.304025] calling i82875p_init+0x0/0xc5 @ 1 [ 12.308029] bus: 'pci': add driver i82875p_edac [ 12.312181] EDAC DEBUG: 875p pci_get_device fail [ 12.316044] bus: 'pci': remove driver i82875p_edac [ 12.320143] driver: 'i82875p_edac': driver_release [ 12.324035] initcall i82875p_init+0x0/0xc5 returned -19 after 15625 usecs [ 12.328025] calling i3000_init+0x0/0xcf @ 1 [ 12.332029] bus: 'pci': add driver i3000_edac [ 12.336182] EDAC DEBUG: i3000 pci_get_device fail [ 12.340043] bus: 'pci': remove driver i3000_edac [ 12.348081] driver: 'i3000_edac': driver_release [ 12.352033] initcall i3000_init+0x0/0xcf returned -19 after 19531 usecs [ 12.356026] calling x38_init+0x0/0xcf @ 1 [ 12.360028] bus: 'pci': add driver x38_edac [ 12.364183] EDAC DEBUG: x38 pci_get_device fail [ 12.368041] bus: 'pci': remove driver x38_edac [ 12.372149] driver: 'x38_edac': driver_release [ 12.376035] initcall x38_init+0x0/0xcf returned -19 after 15625 usecs [ 12.380026] calling r82600_init+0x0/0x29 @ 1 [ 12.384029] bus: 'pci': add driver r82600_edac [ 12.388201] initcall r82600_init+0x0/0x29 returned 0 after 3906 usecs [ 12.392025] calling cpufreq_stats_init+0x0/0x88 @ 1 [ 12.396072] initcall cpufreq_stats_init+0x0/0x88 returned 0 after 0 usecs [ 12.400025] calling cpufreq_gov_powersave_init+0x0/0xf @ 1 [ 12.404028] initcall cpufreq_gov_powersave_init+0x0/0xf returned 0 after 0 usecs [ 12.408025] calling cpufreq_gov_dbs_init+0x0/0xf @ 1 [ 12.412028] initcall cpufreq_gov_dbs_init+0x0/0xf returned 0 after 0 usecs [ 12.416025] calling init_ladder+0x0/0xf @ 1 [ 12.420053] cpuidle: using governor ladder [ 12.424025] initcall init_ladder+0x0/0xf returned 0 after 3906 usecs [ 12.428026] calling init_menu+0x0/0xf @ 1 [ 12.432024] cpuidle: using governor menu [ 12.436026] initcall init_menu+0x0/0xf returned 0 after 3906 usecs [ 12.440025] calling memstick_init+0x0/0x75 @ 1 [ 12.444154] bus: 'memstick': registered [ 12.448025] device class 'memstick_host': registering [ 12.452151] initcall memstick_init+0x0/0x75 returned 0 after 7812 usecs [ 12.456025] calling dcdrbu_init+0x0/0x10f @ 1 [ 12.460030] Registering platform device 'dell_rbu'. Parent at platform [ 12.464024] device: 'dell_rbu': device_add [ 12.468035] bus: 'platform': add device dell_rbu [ 12.476080] initcall dcdrbu_init+0x0/0x10f returned 0 after 15625 usecs [ 12.480025] calling geode_aes_init+0x0/0x16 @ 1 [ 12.484031] bus: 'pci': add driver Geode LX AES [ 12.488171] initcall geode_aes_init+0x0/0x16 returned 0 after 3906 usecs [ 12.492027] calling init_hrt_clocksource+0x0/0xda @ 1 [ 12.496026] initcall init_hrt_clocksource+0x0/0xda returned -19 after 0 usecs [ 12.500026] calling hid_init+0x0/0x3d @ 1 [ 12.504139] bus: 'hid': registered [ 12.508030] device class 'hidraw': registering [ 12.512143] initcall hid_init+0x0/0x3d returned 0 after 7812 usecs [ 12.516029] calling apple_init+0x0/0x32 @ 1 [ 12.520037] bus: 'hid': add driver apple [ 12.524174] initcall apple_init+0x0/0x32 returned 0 after 3906 usecs [ 12.528026] calling ch_init+0x0/0x1b @ 1 [ 12.532026] bus: 'hid': add driver cherry [ 12.536152] initcall ch_init+0x0/0x1b returned 0 after 3906 usecs [ 12.540027] calling ez_init+0x0/0x1b @ 1 [ 12.544025] bus: 'hid': add driver ezkey [ 12.548153] initcall ez_init+0x0/0x1b returned 0 after 3906 usecs [ 12.552026] calling pl_init+0x0/0x1b @ 1 [ 12.556026] bus: 'hid': add driver pantherlord [ 12.560163] initcall pl_init+0x0/0x1b returned 0 after 3906 usecs [ 12.564028] calling ga_init+0x0/0x16 @ 1 [ 12.568025] bus: 'hid': add driver greenasia [ 12.572154] initcall ga_init+0x0/0x16 returned 0 after 3906 usecs [ 12.576026] calling zp_init+0x0/0x1b @ 1 [ 12.580026] bus: 'hid': add driver zeroplus [ 12.584152] initcall zp_init+0x0/0x1b returned 0 after 3906 usecs [ 12.588027] calling hid_init+0x0/0x65 @ 1 [ 12.592025] bus: 'hid': add driver generic-usb [ 12.596172] bus: 'usb': add driver usbhid [ 12.604044] usbcore: registered new interface driver usbhid [ 12.608028] usbhid: v2.6:USB HID core driver [ 12.612028] initcall hid_init+0x0/0x65 returned 0 after 19531 usecs [ 12.616025] calling usb_mouse_init+0x0/0x2d @ 1 [ 12.620029] bus: 'usb': add driver usbmouse [ 12.624156] usbcore: registered new interface driver usbmouse [ 12.628029] usbmouse: v1.6:USB HID Boot Protocol mouse driver [ 12.632026] initcall usb_mouse_init+0x0/0x2d returned 0 after 11718 usecs [ 12.636026] calling init_soundcore+0x0/0x64 @ 1 [ 12.640033] device class 'sound': registering [ 12.644141] initcall init_soundcore+0x0/0x64 returned 0 after 3906 usecs [ 12.648026] calling oprofile_init+0x0/0x47 @ 1 [ 12.652027] oprofile: using NMI interrupt. [ 12.656033] initcall oprofile_init+0x0/0x47 returned 0 after 3906 usecs [ 12.660026] calling flow_cache_init+0x0/0x149 @ 1 [ 12.664329] initcall flow_cache_init+0x0/0x149 returned 0 after 0 usecs [ 12.668028] calling llc_init+0x0/0x1b @ 1 [ 12.672028] initcall llc_init+0x0/0x1b returned 0 after 0 usecs [ 12.676026] calling snap_init+0x0/0x2a @ 1 [ 12.680066] initcall snap_init+0x0/0x2a returned 0 after 0 usecs [ 12.684027] calling blackhole_module_init+0x0/0xf @ 1 [ 12.688027] initcall blackhole_module_init+0x0/0xf returned 0 after 0 usecs [ 12.692026] calling prio_module_init+0x0/0xf @ 1 [ 12.696026] initcall prio_module_init+0x0/0xf returned 0 after 0 usecs [ 12.700026] calling netem_module_init+0x0/0x19 @ 1 [ 12.704024] netem: version 1.2 [ 12.708027] initcall netem_module_init+0x0/0x19 returned 0 after 3906 usecs [ 12.712026] calling init_route4+0x0/0xf @ 1 [ 12.716054] initcall init_route4+0x0/0xf returned 0 after 0 usecs [ 12.720025] calling init_fw+0x0/0xf @ 1 [ 12.724027] initcall init_fw+0x0/0xf returned 0 after 0 usecs [ 12.728025] calling init_tcindex+0x0/0xf @ 1 [ 12.732028] initcall init_tcindex+0x0/0xf returned 0 after 0 usecs [ 12.736025] calling init_rsvp+0x0/0xf @ 1 [ 12.740027] initcall init_rsvp+0x0/0xf returned 0 after 0 usecs [ 12.744025] calling cls_flow_init+0x0/0xf @ 1 [ 12.748028] initcall cls_flow_init+0x0/0xf returned 0 after 0 usecs [ 12.752025] calling init_cgroup_cls+0x0/0xf @ 1 [ 12.756027] initcall init_cgroup_cls+0x0/0xf returned 0 after 0 usecs [ 12.760025] calling init_em_cmp+0x0/0xf @ 1 [ 12.764054] initcall init_em_cmp+0x0/0xf returned 0 after 0 usecs [ 12.768026] calling init_em_nbyte+0x0/0xf @ 1 [ 12.772027] initcall init_em_nbyte+0x0/0xf returned 0 after 0 usecs [ 12.776035] calling init_em_u32+0x0/0xf @ 1 [ 12.780027] initcall init_em_u32+0x0/0xf returned 0 after 0 usecs [ 12.784025] calling init_em_meta+0x0/0xf @ 1 [ 12.788027] initcall init_em_meta+0x0/0xf returned 0 after 0 usecs [ 12.792025] calling nfnetlink_init+0x0/0x4f @ 1 [ 12.796025] Netfilter messages via NETLINK v0.30. [ 12.800042] initcall nfnetlink_init+0x0/0x4f returned 0 after 3906 usecs [ 12.808026] calling nfnetlink_queue_init+0x0/0x87 @ 1 [ 12.812070] initcall nfnetlink_queue_init+0x0/0x87 returned 0 after 0 usecs [ 12.816027] calling nfnetlink_log_init+0x0/0x8a @ 1 [ 12.820040] initcall nfnetlink_log_init+0x0/0x8a returned 0 after 0 usecs [ 12.824032] calling sysctl_ipv4_init+0x0/0x3f @ 1 [ 12.829325] initcall sysctl_ipv4_init+0x0/0x3f returned 0 after 0 usecs [ 12.832027] calling ipip_init+0x0/0x5f @ 1 [ 12.836024] IPv4 over IPv4 tunneling driver [ 12.840154] device: 'tunl0': device_add [ 12.844832] initcall ipip_init+0x0/0x5f returned 0 after 7812 usecs [ 12.848028] calling init_syncookies+0x0/0x16 @ 1 [ 12.852068] initcall init_syncookies+0x0/0x16 returned 0 after 0 usecs [ 12.856027] calling esp4_init+0x0/0x5a @ 1 [ 12.860028] initcall esp4_init+0x0/0x5a returned 0 after 0 usecs [ 12.864027] calling tunnel4_init+0x0/0x5a @ 1 [ 12.868027] initcall tunnel4_init+0x0/0x5a returned 0 after 0 usecs [ 12.872029] calling ipv4_netfilter_init+0x0/0x14 @ 1 [ 12.876061] initcall ipv4_netfilter_init+0x0/0x14 returned 0 after 0 usecs [ 12.880027] calling ip_queue_init+0x0/0x10c @ 1 [ 12.884114] initcall ip_queue_init+0x0/0x10c returned 0 after 0 usecs [ 12.888027] calling cubictcp_register+0x0/0x7f @ 1 [ 12.892025] TCP cubic registered [ 12.896027] initcall cubictcp_register+0x0/0x7f returned 0 after 3906 usecs [ 12.900026] calling tcp_vegas_register+0x0/0x11 @ 1 [ 12.904025] TCP vegas registered [ 12.908026] initcall tcp_vegas_register+0x0/0x11 returned 0 after 3906 usecs [ 12.912028] calling tcp_veno_register+0x0/0x11 @ 1 [ 12.916024] TCP veno registered [ 12.920027] initcall tcp_veno_register+0x0/0x11 returned 0 after 3906 usecs [ 12.924025] calling packet_init+0x0/0x39 @ 1 [ 12.928027] NET: Registered protocol family 17 [ 12.932067] initcall packet_init+0x0/0x39 returned 0 after 3906 usecs [ 12.936026] calling br_init+0x0/0xbe @ 1 [ 12.940294] Bridge firewalling registered [ 12.944062] initcall br_init+0x0/0xbe returned 0 after 3906 usecs [ 12.948025] calling dsa_init_module+0x0/0x11 @ 1 [ 12.952027] initcall dsa_init_module+0x0/0x11 returned 0 after 0 usecs [ 12.956025] calling trailer_init_module+0x0/0x11 @ 1 [ 12.960027] initcall trailer_init_module+0x0/0x11 returned 0 after 0 usecs [ 12.964025] calling mv88e6060_init+0x0/0x11 @ 1 [ 12.968054] initcall mv88e6060_init+0x0/0x11 returned 0 after 0 usecs [ 12.972025] calling mv88e6131_init+0x0/0x11 @ 1 [ 12.976027] initcall mv88e6131_init+0x0/0x11 returned 0 after 0 usecs [ 12.980025] calling dsa_init_module+0x0/0xf @ 1 [ 12.984028] bus: 'platform': add driver dsa [ 12.988149] initcall dsa_init_module+0x0/0xf returned 0 after 3906 usecs [ 12.992027] calling ipx_init+0x0/0xd2 @ 1 [ 12.996251] NET: Registered protocol family 4 [ 13.020101] initcall ipx_init+0x0/0xd2 returned 0 after 23437 usecs [ 13.024027] calling x25_init+0x0/0x50 @ 1 [ 13.028025] NET: Registered protocol family 9 [ 13.032035] X.25 for Linux Version 0.2 [ 13.036180] initcall x25_init+0x0/0x50 returned 0 after 7812 usecs [ 13.040026] calling rose_proto_init+0x0/0x22c @ 1 [ 13.044039] rose0 (): not using net_device_ops yet [ 13.048027] device: 'rose0': device_add [ 13.052920] rose1 (): not using net_device_ops yet [ 13.056028] device: 'rose1': device_add [ 13.064887] rose2 (): not using net_device_ops yet [ 13.068026] device: 'rose2': device_add [ 13.072997] rose3 (): not using net_device_ops yet [ 13.076027] device: 'rose3': device_add [ 13.084495] rose4 (): not using net_device_ops yet [ 13.088027] device: 'rose4': device_add [ 13.093058] rose5 (): not using net_device_ops yet [ 13.096028] device: 'rose5': device_add [ 13.104175] rose6 (): not using net_device_ops yet [ 13.108026] device: 'rose6': device_add [ 13.113139] rose7 (): not using net_device_ops yet [ 13.116027] device: 'rose7': device_add [ 13.121163] rose8 (): not using net_device_ops yet [ 13.124026] device: 'rose8': device_add [ 13.129216] rose9 (): not using net_device_ops yet [ 13.132027] device: 'rose9': device_add [ 13.137224] NET: Registered protocol family 11 [ 13.140457] initcall rose_proto_init+0x0/0x22c returned 0 after 93750 usecs [ 13.144027] calling ax25_init+0x0/0x8e @ 1 [ 13.148025] NET: Registered protocol family 3 [ 13.152117] initcall ax25_init+0x0/0x8e returned 0 after 3906 usecs [ 13.156026] calling econet_proto_init+0x0/0x39 @ 1 [ 13.160026] NET: Registered protocol family 19 [ 13.164028] initcall econet_proto_init+0x0/0x39 returned 0 after 3906 usecs [ 13.168026] calling phonet_init+0x0/0x6a @ 1 [ 13.172025] NET: Registered protocol family 35 [ 13.176324] initcall phonet_init+0x0/0x6a returned 0 after 3906 usecs [ 13.180026] calling pep_register+0x0/0x14 @ 1 [ 13.184249] initcall pep_register+0x0/0x14 returned 0 after 0 usecs [ 13.188026] calling vlan_proto_init+0x0/0xa7 @ 1 [ 13.192026] 802.1Q VLAN Support v1.8 Ben Greear [ 13.196025] All bugs added by David S. Miller [ 13.200087] initcall vlan_proto_init+0x0/0xa7 returned 0 after 7812 usecs [ 13.204026] calling wimax_subsys_init+0x0/0x1d7 @ 1 [ 13.224070] initcall wimax_subsys_init+0x0/0x1d7 returned 0 after 15625 usecs [ 13.228028] calling update_mp_table+0x0/0x1b3 @ 1 [ 13.232029] initcall update_mp_table+0x0/0x1b3 returned 0 after 0 usecs [ 13.236027] calling lapic_insert_resource+0x0/0x45 @ 1 [ 13.240030] initcall lapic_insert_resource+0x0/0x45 returned 0 after 0 usecs [ 13.244026] calling print_ipi_mode+0x0/0x25 @ 1 [ 13.248026] Using IPI No-Shortcut mode [ 13.252026] initcall print_ipi_mode+0x0/0x25 returned 0 after 3906 usecs [ 13.256028] calling ioapic_insert_resources+0x0/0x42 @ 1 [ 13.260028] initcall ioapic_insert_resources+0x0/0x42 returned 0 after 0 usecs [ 13.264027] calling io_apic_bug_finalize+0x0/0x1a @ 1 [ 13.268027] initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 0 usecs [ 13.272027] calling check_early_ioremap_leak+0x0/0x5e @ 1 [ 13.276027] initcall check_early_ioremap_leak+0x0/0x5e returned 0 after 0 usecs [ 13.280027] calling sched_init_debug+0x0/0x1f @ 1 [ 13.284043] initcall sched_init_debug+0x0/0x1f returned 0 after 0 usecs [ 13.288041] calling init_oops_id+0x0/0x3f @ 1 [ 13.292032] initcall init_oops_id+0x0/0x3f returned 0 after 0 usecs [ 13.296027] calling disable_boot_consoles+0x0/0x36 @ 1 [ 13.300027] initcall disable_boot_consoles+0x0/0x36 returned 0 after 0 usecs [ 13.304027] calling pm_qos_power_init+0x0/0xae @ 1 [ 13.308031] device: 'cpu_dma_latency': device_add [ 13.312152] device: 'network_latency': device_add [ 13.316148] device: 'network_throughput': device_add [ 13.320150] initcall pm_qos_power_init+0x0/0xae returned 0 after 11718 usecs [ 13.324027] calling debugfs_kprobe_init+0x0/0x78 @ 1 [ 13.328053] initcall debugfs_kprobe_init+0x0/0x78 returned 0 after 0 usecs [ 13.332026] calling taskstats_init+0x0/0x7d @ 1 [ 13.336067] registered taskstats version 1 [ 13.340027] initcall taskstats_init+0x0/0x7d returned 0 after 3906 usecs [ 13.344027] calling clear_boot_tracer+0x0/0x27 @ 1 [ 13.348027] initcall clear_boot_tracer+0x0/0x27 returned 0 after 0 usecs [ 13.352027] calling max_swapfiles_check+0x0/0x7 @ 1 [ 13.356026] initcall max_swapfiles_check+0x0/0x7 returned 0 after 0 usecs [ 13.360028] calling random32_reseed+0x0/0x78 @ 1 [ 13.364042] initcall random32_reseed+0x0/0x78 returned 0 after 0 usecs [ 13.368029] calling pci_sysfs_init+0x0/0x44 @ 1 [ 13.372324] initcall pci_sysfs_init+0x0/0x44 returned 0 after 0 usecs [ 13.376028] calling seqgen_init+0x0/0xe @ 1 [ 13.380044] initcall seqgen_init+0x0/0xe returned 0 after 0 usecs [ 13.384028] calling scsi_complete_async_scans+0x0/0xf7 @ 1 [ 13.388027] initcall scsi_complete_async_scans+0x0/0xf7 returned 0 after 0 usecs [ 13.392027] calling rtc_hctosys+0x0/0x125 @ 1 [ 13.396071] rtc-test rtc-test.0: setting system clock to 2009-03-18 11:08:23 UTC (1237374503) [ 13.400028] initcall rtc_hctosys+0x0/0x125 returned 0 after 3906 usecs [ 13.404026] calling memmap_init+0x0/0x8e @ 1 [ 13.408147] initcall memmap_init+0x0/0x8e returned 0 after 0 usecs [ 13.412028] calling tcp_congestion_default+0x0/0xf @ 1 [ 13.416030] initcall tcp_congestion_default+0x0/0xf returned 0 after 0 usecs [ 13.420027] calling ip_auto_config+0x0/0x274 @ 1 [ 13.424038] initcall ip_auto_config+0x0/0x274 returned 0 after 0 usecs [ 13.428071] driver_probe_done: probe_count = 0 [ 13.432026] async_waiting @ 1 [ 13.436026] async_continuing @ 1 after 0 usec [ 13.440521] EXT3-fs: INFO: recovery required on readonly filesystem. [ 13.448100] EXT3-fs: write access will be enabled during recovery. [ 13.496160] kjournald starting. Commit interval 5 seconds [ 13.500061] EXT3-fs: recovery complete. [ 13.504190] EXT3-fs: mounted filesystem with ordered data mode. [ 13.512123] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 13.520112] async_waiting @ 1 [ 13.522967] async_continuing @ 1 after 0 usec [ 13.524025] debug: unmapping init memory c07e3000..c0853000 [ 13.540303] device: 'vcs1': device_add [ 13.560099] khelper used greatest stack depth: 6600 bytes left [ 13.560141] device: 'vcsa1': device_add [ 13.932682] modprobe used greatest stack depth: 6508 bytes left [ 13.940301] device: 'vcs1': device_unregister [ 13.940492] device: 'vcs1': device_create_release [ 13.940492] device: 'vcsa1': device_unregister [ 13.940492] device: 'vcsa1': device_create_release [ 13.960102] device: 'vcs1': device_add [ 13.960241] device: 'vcsa1': device_add [ 13.968140] device: 'vcs1': device_unregister [ 13.968287] device: 'vcs1': device_create_release [ 13.968287] device: 'vcsa1': device_unregister [ 13.968287] device: 'vcsa1': device_create_release [ 13.996152] device: 'vcs1': device_add [ 13.996291] device: 'vcsa1': device_add [ 14.004095] device: 'vcs1': device_unregister [ 14.004244] device: 'vcs1': device_create_release [ 14.004244] device: 'vcsa1': device_unregister [ 14.008065] device: 'vcsa1': device_create_release [ 14.024094] device: 'vcs1': device_add [ 14.024232] device: 'vcsa1': device_add [ 14.032108] device: 'vcs1': device_unregister [ 14.032255] device: 'vcs1': device_create_release [ 14.032255] device: 'vcsa1': device_unregister [ 14.032255] device: 'vcsa1': device_create_release [ 14.052095] device: 'vcs1': device_add [ 14.052230] device: 'vcsa1': device_add [ 14.060137] device: 'vcs1': device_unregister [ 14.060284] device: 'vcs1': device_create_release [ 14.060284] device: 'vcsa1': device_unregister [ 14.060284] device: 'vcsa1': device_create_release [ 14.088255] device: 'vcs1': device_add [ 14.088446] device: 'vcsa1': device_add [ 14.380672] mount used greatest stack depth: 6236 bytes left [ 17.124206] fsck.ext3 used greatest stack depth: 6176 bytes left [ 17.308554] EXT3 FS on sda1, internal journal [ 17.384249] kjournald starting. Commit interval 5 seconds [ 17.384249] EXT3 FS on sda5, internal journal [ 17.384249] EXT3-fs: mounted filesystem with ordered data mode. [ 18.639106] rc.sysinit used greatest stack depth: 6092 bytes left [ 18.644623] device: 'vcs1': device_unregister [ 18.644745] device: 'vcs1': device_create_release [ 18.644745] device: 'vcsa1': device_unregister [ 18.644745] device: 'vcsa1': device_create_release [ 18.672780] device: 'vcs1': device_add [ 18.672898] device: 'vcsa1': device_add [ 18.680127] device: 'vcs1': device_unregister [ 18.680227] device: 'vcs1': device_create_release [ 18.680227] device: 'vcsa1': device_unregister [ 18.680227] device: 'vcsa1': device_create_release [ 18.700136] device: 'vcs1': device_add [ 18.700271] device: 'vcsa1': device_add [ 18.708096] device: 'vcs1': device_unregister [ 18.708242] device: 'vcs1': device_create_release [ 18.708242] device: 'vcsa1': device_unregister [ 18.708242] device: 'vcsa1': device_create_release [ 18.728093] device: 'vcs1': device_add [ 18.728229] device: 'vcsa1': device_add [ 18.736138] device: 'vcs1': device_unregister [ 18.736282] device: 'vcs1': device_create_release [ 18.736282] device: 'vcsa1': device_unregister [ 18.736282] device: 'vcsa1': device_create_release [ 18.752383] device: 'vcs1': device_add [ 18.752412] device: 'vcsa1': device_add [ 19.648023] eth0: no link during initialization. [ 21.952553] eth0: link up. [ 22.684073] ------------[ cut here ]------------ [ 22.688023] WARNING: at lib/dma-debug.c:562 check_unmap+0x30e/0x4b4() [ 22.688023] Hardware name: System Product Name [ 22.688023] forcedeth 0000:00:0a.0: DMA-API: device driver frees DMA memory with wrong function [device address=0x0000000035992232] [size=42 bytes] [mapped as single] [unmapped as page] [ 22.688023] Modules linked in: [ 22.688023] Pid: 1523, comm: arping Not tainted 2.6.29-rc8-tip #20999 [ 22.688023] Call Trace: [ 22.688023] [] warn_slowpath+0x76/0xad [ 22.688023] [] ? add_dma_entry+0x4b/0x51 [ 22.688023] [] ? mark_lock+0x1c/0x16f [ 22.688023] [] ? __lock_acquire+0x18c/0x296 [ 22.688023] [] ? nv_start_xmit_optimized+0x3bd/0x3eb [ 22.688023] [] ? mark_lock+0x1c/0x16f [ 22.688023] [] ? __lock_acquire+0x18c/0x296 [ 22.688023] [] check_unmap+0x30e/0x4b4 [ 22.688023] [] ? _spin_lock+0x27/0x2f [ 22.688023] [] ? _local_bh_enable_ip+0xa1/0xa7 [ 22.688023] [] ? dev_queue_xmit+0x325/0x359 [ 22.688023] [] ? trace_hardirqs_on+0x21/0x23 [ 22.688023] [] ? _local_bh_enable_ip+0xa1/0xa7 [ 22.688023] [] ? local_bh_enable+0x10/0x12 [ 22.688023] [] ? packet_sendmsg+0x1b7/0x20a [ 22.688023] [] debug_dma_unmap_page+0x59/0x61 [ 22.688023] [] pci_unmap_page+0x5b/0x66 [ 22.688023] [] nv_tx_done_optimized+0x46/0x1c5 [ 22.688023] [] nv_nic_irq_optimized+0xa7/0x233 [ 22.688023] [] handle_IRQ_event+0x85/0xdf [ 22.688023] [] handle_fasteoi_irq+0x79/0xb9 [ 22.688023] [] handle_irq+0x1f/0x24 [ 22.688023] [] do_IRQ+0x45/0x88 [ 22.688023] [] common_interrupt+0x35/0x40 [ 22.688023] [] ? do_setitimer+0x160/0x2d9 [ 22.688023] [] ? _spin_unlock_irq+0x29/0x2b [ 22.688023] [] do_setitimer+0x160/0x2d9 [ 22.688023] [] ? sys_socketcall+0xed/0x188 [ 22.688023] [] alarm_setitimer+0x39/0x58 [ 22.688023] [] sys_alarm+0x10/0x12 [ 22.688023] [] sysenter_do_call+0x12/0x32 [ 22.688023] ---[ end trace bf7fa25698012db6 ]--- [ 22.688023] Mapped at: [ 22.688023] [] debug_dma_map_page+0x6c/0x128 [ 22.688023] [] pci_map_single+0xb5/0xc1 [ 22.688023] [] nv_start_xmit_optimized+0x138/0x3eb [ 22.688023] [] dev_hard_start_xmit+0x123/0x18f [ 22.688023] [] __qdisc_run+0xd0/0x1b3 [ 23.700081] arping used greatest stack depth: 5988 bytes left [ 24.545512] Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k [ 25.694685] ssh used greatest stack depth: 5776 bytes left [ 25.954828] Unmapping cpu 1 from all nodes [ 25.956043] CPU 1 is now offline [ 25.960075] lockdep: fixing up alternatives. [ 25.964514] SMP alternatives: switching to UP code [ 26.019497] CPU0 attaching NULL sched-domain. [ 26.020232] CPU1 attaching NULL sched-domain. [ 26.030507] CPU0 attaching NULL sched-domain. [ 27.049073] lockdep: fixing up alternatives. [ 27.052032] SMP alternatives: switching to SMP code [ 27.062305] Booting processor 1 APIC 0x1 ip 0x6000 [ 26.018837] Initializing CPU#1 [ 26.018837] masked ExtINT on CPU#1 [ 26.018837] Mapping cpu 1 to node 0 [ 26.018837] Calibrating delay using timer specific routine.. 4020.86 BogoMIPS (lpj=8041727) [ 26.018837] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 26.018837] CPU: L2 Cache: 512K (64 bytes/line) [ 26.018837] CPU: Physical Processor ID: 0 [ 26.018837] CPU: Processor Core ID: 1 [ 26.018837] Intel machine check architecture supported. [ 26.018837] Intel machine check reporting enabled on CPU#1. [ 27.156138] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 27.165331] CPU0 attaching NULL sched-domain. [ 27.184315] CPU0 attaching sched-domain: [ 27.188031] domain 0: span 0-1 level CPU [ 27.192034] groups: 0 1 [ 27.194621] domain 1: span 0-1 level NODE [ 27.197840] groups: 0-1 [ 27.200546] CPU1 attaching sched-domain: [ 27.204153] domain 0: span 0-1 level CPU [ 27.208026] groups: 1 0 [ 27.212027] domain 1: span 0-1 level NODE [ 27.216028] groups: 0-1 [ 27.221331] microcode: CPU1: AMD CPU family 0xf not supported [ 28.245024] Unmapping cpu 1 from all nodes [ 28.248051] CPU 1 is now offline [ 28.252025] lockdep: fixing up alternatives. [ 28.256028] SMP alternatives: switching to UP code [ 28.266449] CPU0 attaching NULL sched-domain. [ 28.268030] CPU1 attaching NULL sched-domain. [ 28.272552] CPU0 attaching NULL sched-domain. [ 29.285037] lockdep: fixing up alternatives. [ 29.288034] SMP alternatives: switching to SMP code [ 29.298261] Booting processor 1 APIC 0x1 ip 0x6000 [ 28.266156] Initializing CPU#1 [ 28.266156] masked ExtINT on CPU#1 [ 28.266156] Mapping cpu 1 to node 0 [ 28.266156] Calibrating delay using timer specific routine.. 4020.86 BogoMIPS (lpj=8041728) [ 28.266156] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 28.266156] CPU: L2 Cache: 512K (64 bytes/line) [ 28.266156] CPU: Physical Processor ID: 0 [ 28.266156] CPU: Processor Core ID: 1 [ 28.266156] Intel machine check architecture supported. [ 28.266156] Intel machine check reporting enabled on CPU#1. [ 29.392085] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 29.401323] CPU0 attaching NULL sched-domain. [ 29.420311] CPU0 attaching sched-domain: [ 29.424032] domain 0: span 0-1 level CPU [ 29.428031] groups: 0 1 [ 29.430620] domain 1: span 0-1 level NODE [ 29.433922] groups: 0-1 [ 29.436550] CPU1 attaching sched-domain: [ 29.440028] domain 0: span 0-1 level CPU [ 29.444027] groups: 1 0 [ 29.448026] domain 1: span 0-1 level NODE [ 29.452025] groups: 0-1 [ 29.456251] microcode: CPU1: AMD CPU family 0xf not supported [ 29.486717] device: 'vcs9': device_add [ 29.488195] device: 'vcsa9': device_add [ 29.492188] device: 'vcs2': device_add [ 29.492486] device: 'vcsa2': device_add [ 29.496119] device: 'vcs4': device_add [ 29.496322] device: 'vcsa4': device_add [ 29.500180] device: 'vcs6': device_add [ 29.500382] device: 'vcsa6': device_add [ 29.504208] device: 'vcs8': device_add [ 29.504438] device: 'vcsa8': device_add [ 29.508107] device: 'vcs9': device_unregister [ 29.508410] device: 'vcs9': device_create_release [ 29.508419] device: 'vcsa9': device_unregister [ 29.508638] device: 'vcsa9': device_create_release [ 29.512266] device: 'vcs2': device_unregister [ 29.512469] device: 'vcs2': device_create_release [ 29.512477] device: 'vcsa2': device_unregister [ 29.512673] device: 'vcsa2': device_create_release [ 29.516222] device: 'vcs4': device_unregister [ 29.516434] device: 'vcs4': device_create_release [ 29.516442] device: 'vcsa4': device_unregister [ 29.516646] device: 'vcsa4': device_create_release [ 29.520343] device: 'vcs6': device_unregister [ 29.524053] device: 'vcs6': device_create_release [ 29.524062] device: 'vcsa6': device_unregister [ 29.524276] device: 'vcsa6': device_create_release [ 29.528218] device: 'vcs7': device_add [ 29.528428] device: 'vcsa7': device_add [ 29.532234] device: 'vcs8': device_unregister [ 29.532429] device: 'vcs8': device_create_release [ 29.532429] device: 'vcsa8': device_unregister [ 29.532429] device: 'vcsa8': device_create_release [ 29.536104] device: 'vcs9': device_add [ 29.536226] device: 'vcsa9': device_add [ 29.540187] device: 'vcs2': device_add [ 29.540309] device: 'vcsa2': device_add [ 29.544072] device: 'vcs5': device_add [ 29.544179] device: 'vcsa5': device_add [ 29.552083] device: 'vcs4': device_add [ 29.552266] device: 'vcsa4': device_add [ 29.556155] device: 'vcs3': device_add [ 29.556163] device: 'vcsa3': device_add [ 29.564032] device: 'vcs6': device_add [ 29.564259] device: 'vcsa6': device_add [ 29.568083] device: 'vcs10': device_add [ 29.568140] device: 'vcsa10': device_add [ 29.576086] device: 'vcs7': device_unregister [ 29.576252] device: 'vcs7': device_create_release [ 29.576263] device: 'vcsa7': device_unregister [ 29.576467] device: 'vcsa7': device_create_release [ 29.580101] device: 'vcs8': device_add [ 29.580224] device: 'vcsa8': device_add [ 29.584200] device: 'vcs5': device_unregister [ 29.584209] device: 'vcs5': device_create_release [ 29.584209] device: 'vcsa5': device_unregister [ 29.584211] device: 'vcsa5': device_create_release [ 29.600112] device: 'vcs3': device_unregister [ 29.600243] device: 'vcs3': device_create_release [ 29.600243] device: 'vcsa3': device_unregister [ 29.600243] device: 'vcsa3': device_create_release [ 29.620069] device: 'vcs10': device_unregister [ 29.620187] device: 'vcs10': device_create_release [ 29.620187] device: 'vcsa10': device_unregister [ 29.620187] device: 'vcsa10': device_create_release [ 29.640124] device: 'vcs7': device_add [ 29.640256] device: 'vcsa7': device_add [ 29.644147] device: 'vcs5': device_add [ 29.644287] device: 'vcsa5': device_add [ 29.652041] device: 'vcs3': device_add [ 29.652118] device: 'vcsa3': device_add [ 29.656130] device: 'vcs10': device_add [ 29.656255] device: 'vcsa10': device_add [ 180.820065] ssh used greatest stack depth: 5692 bytes left