| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1237519518-24048-5-git-send-email-yu.zhao@intel.com>
Date: Fri, 20 Mar 2009 11:25:14 +0800
From: Yu Zhao <yu.zhao@...el.com>
To: jbarnes@...tuousgeek.org
Cc: linux-pci@...r.kernel.org, kvm@...r.kernel.org,
linux-kernel@...r.kernel.org, Yu Zhao <yu.zhao@...el.com>
Subject: [PATCH v12 4/8] PCI: centralize device setup code
Move the device setup stuff into pci_setup_device() which will be used
to setup the Virtual Function later.
Reviewed-by: Matthew Wilcox <willy@...ux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@...el.com>
---
drivers/pci/pci.h | 1 +
drivers/pci/probe.c | 79 ++++++++++++++++++++++++++-------------------------
2 files changed, 41 insertions(+), 39 deletions(-)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 7abdef6..80ad848 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -178,6 +178,7 @@ enum pci_bar_type {
pci_bar_mem64, /* A 64-bit memory BAR */
};
+extern int pci_setup_device(struct pci_dev *dev);
extern int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
struct resource *res, unsigned int reg);
extern int pci_resource_bar(struct pci_dev *dev, int resno,
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 4c8abd0..f4ca550 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -674,6 +674,19 @@ static void pci_read_irq(struct pci_dev *dev)
dev->irq = irq;
}
+static void set_pcie_port_type(struct pci_dev *pdev)
+{
+ int pos;
+ u16 reg16;
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+ if (!pos)
+ return;
+ pdev->is_pcie = 1;
+ pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16);
+ pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
+}
+
#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
/**
@@ -683,12 +696,34 @@ static void pci_read_irq(struct pci_dev *dev)
* Initialize the device structure with information about the device's
* vendor,class,memory and IO-space addresses,IRQ lines etc.
* Called at initialisation of the PCI subsystem and by CardBus services.
- * Returns 0 on success and -1 if unknown type of device (not normal, bridge
- * or CardBus).
+ * Returns 0 on success and negative if unknown type of device (not normal,
+ * bridge or CardBus).
*/
-static int pci_setup_device(struct pci_dev * dev)
+int pci_setup_device(struct pci_dev *dev)
{
u32 class;
+ u8 hdr_type;
+ struct pci_slot *slot;
+
+ if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type))
+ return -EIO;
+
+ dev->sysdata = dev->bus->sysdata;
+ dev->dev.parent = dev->bus->bridge;
+ dev->dev.bus = &pci_bus_type;
+ dev->hdr_type = hdr_type & 0x7f;
+ dev->multifunction = !!(hdr_type & 0x80);
+ dev->cfg_size = pci_cfg_space_size(dev);
+ dev->error_state = pci_channel_io_normal;
+ set_pcie_port_type(dev);
+
+ list_for_each_entry(slot, &dev->bus->slots, list)
+ if (PCI_SLOT(dev->devfn) == slot->number)
+ dev->slot = slot;
+
+ /* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
+ set this higher, assuming the system even supports it. */
+ dev->dma_mask = 0xffffffff;
dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
dev->bus->number, PCI_SLOT(dev->devfn),
@@ -708,7 +743,6 @@ static int pci_setup_device(struct pci_dev * dev)
/* Early fixups, before probing the BARs */
pci_fixup_device(pci_fixup_early, dev);
- class = dev->class >> 8;
switch (dev->hdr_type) { /* header type */
case PCI_HEADER_TYPE_NORMAL: /* standard header */
@@ -770,7 +804,7 @@ static int pci_setup_device(struct pci_dev * dev)
default: /* unknown header */
dev_err(&dev->dev, "unknown header type %02x, "
"ignoring device\n", dev->hdr_type);
- return -1;
+ return -EIO;
bad:
dev_err(&dev->dev, "ignoring class %02x (doesn't match header "
@@ -804,19 +838,6 @@ static void pci_release_dev(struct device *dev)
kfree(pci_dev);
}
-static void set_pcie_port_type(struct pci_dev *pdev)
-{
- int pos;
- u16 reg16;
-
- pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
- if (!pos)
- return;
- pdev->is_pcie = 1;
- pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16);
- pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
-}
-
/**
* pci_cfg_space_size - get the configuration space size of the PCI device.
* @dev: PCI device
@@ -892,9 +913,7 @@ EXPORT_SYMBOL(alloc_pci_dev);
static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
{
struct pci_dev *dev;
- struct pci_slot *slot;
u32 l;
- u8 hdr_type;
int delay = 1;
if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
@@ -921,34 +940,16 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
}
}
- if (pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type))
- return NULL;
-
dev = alloc_pci_dev();
if (!dev)
return NULL;
dev->bus = bus;
- dev->sysdata = bus->sysdata;
- dev->dev.parent = bus->bridge;
- dev->dev.bus = &pci_bus_type;
dev->devfn = devfn;
- dev->hdr_type = hdr_type & 0x7f;
- dev->multifunction = !!(hdr_type & 0x80);
dev->vendor = l & 0xffff;
dev->device = (l >> 16) & 0xffff;
- dev->cfg_size = pci_cfg_space_size(dev);
- dev->error_state = pci_channel_io_normal;
- set_pcie_port_type(dev);
-
- list_for_each_entry(slot, &bus->slots, list)
- if (PCI_SLOT(devfn) == slot->number)
- dev->slot = slot;
- /* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
- set this higher, assuming the system even supports it. */
- dev->dma_mask = 0xffffffff;
- if (pci_setup_device(dev) < 0) {
+ if (pci_setup_device(dev)) {
kfree(dev);
return NULL;
}
--
1.5.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists