| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200903212305.00077.rjw@sisk.pl>
Date: Sat, 21 Mar 2009 23:04:59 +0100
From: "Rafael J. Wysocki" <rjw@...k.pl>
To: Yinghai Lu <yinghai@...nel.org>
Cc: David Miller <davem@...emloft.net>,
Jesse Brandeburg <jesse.brandeburg@...il.com>,
Ingo Molnar <mingo@...e.hu>,
Andrew Morton <akpm@...ux-foundation.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
NetDev <netdev@...r.kernel.org>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [Updated patch] Re: [PATCH] igb: fix kexec with igb
On Thursday 12 March 2009, Yinghai Lu wrote:
> Rafael J. Wysocki wrote:
> > On Sunday 08 March 2009, Rafael J. Wysocki wrote:
> >> On Sunday 08 March 2009, Yinghai Lu wrote:
> >>> Rafael J. Wysocki wrote:
> >>>> On Saturday 07 March 2009, Yinghai Lu wrote:
> >>>>> On Fri, Mar 6, 2009 at 11:18 PM, Jesse Brandeburg
> >>>>> <jesse.brandeburg@...il.com> wrote:
> >>>>>> On Fri, Mar 6, 2009 at 8:33 PM, Yinghai Lu <yinghai@...nel.org> wrote:
> >>>>>>> Impact: could probe igb
> >>>>>>>
> >>>>>>> Found one system with 82575EB, in the kernel that is kexeced, probe igb
> >>>>>>> failed with -2.
> >>>>>>>
> >>>>>>> it looks like the same behavior happened on forcedeth.
> >>>>>>>
> >>>>>>> try to check system_state to make sure if put it on D3
> >>>>>>>
> >>>>>>> Signed-off-by: Yinghai Lu <yinghai@...nel.org>
> >>>>>>>
> >>>>>>> ---
> >>>>>>> drivers/net/igb/igb_main.c | 19 ++++++++++++++-----
> >>>>>>> 1 file changed, 14 insertions(+), 5 deletions(-)
> >>>>>> I see the point of the patch, but I know for a fact that ixgbe when
> >>>>>> enabled for MSI-X also doesn't work with kexec.
> >>>>>>
> >>>>>> so my questions are:
> >>>>>> are you going to change every driver?
> >>>>> i tend to only change driver that i have related HW.
> >>>>>
> >>>>>> why can't this be fixed in core kernel code instead?
> >>>>> will check it.
> >>>>>
> >>>>>> Shouldn't pci_enable_device take it out of D3?
> >>>>>> Or maybe it should be taken out of D3 immediately if someone tries to
> >>>>>> ioremap any of the BARx registers?
> >>>>> looks like second kernel can not detect the state any more.
> >>>> In fact pci_enable_device() calls pci_set_power_state(dev, PCI_D0) as the first
> >>>> thing. The question is why it doesn't work as expected.
> >>> not sure... please check the version for forcedeth that you made.
> >>>
> >>> commit 3cb5599a84c557c0dd9a19feb63a3788268cf249
> >>> Author: Rafael J. Wysocki <rjw@...k.pl>
> >>> Date: Fri Sep 5 14:00:19 2008 -0700
> >>>
> >>> forcedeth: fix kexec regression
> >>>
> >>> Fix regression tracked as http://bugzilla.kernel.org/show_bug.cgi?id=11361
> >>> and caused by commit f735a2a1a4f2a0f5cd823ce323e82675990469e2 ("[netdrvr]
> >>> forcedeth: setup wake-on-lan before shutting down") that makes network
> >>> adapters integrated into the NVidia MCP55 chipsets fail to work in kexeced
> >>> kernels. The problem appears to be that if the adapter is put into D3_hot
> >>> during ->shutdown(), it cannot be brought back into D0 after kexec (ref.
> >>> http://marc.info/?l=linux-kernel&m=121900062814967&w=4). Therefore, only
> >>> put forcedeth into D3 during ->shutdown() if the system is to be powered
> >>> off.
> >> Thanks, I remember now.
> >
> > In which case you need to rework igb_shutdown() rather than igb_suspend().
> >
> > Something like the patch below, perhaps (totally untested).
>
> it works, David, can you picked it up
Still, Yinghai, can you please also test the patch below? It fixes all
shortcomings in the driver's suspend and shutdown methods I was talking about
in one of the previous messages. If it works, IMO it will be a preferable fix
(in particular, it would be good to check if WoL still works with it,
but I don't have the hardware).
Thanks,
Rafael
---
From: Rafael J. Wysocki <rjw@...k.pl>
Subject: net/igb: Fix kexec with igb (rev. 3)
Impact: Fix
Yinghai Lu found one system with 82575EB where, in the kernel that is
kexeced, probe igb failed with -2, the reason being that the adapter
could not be brought back from D3 by the kexec kernel, most probably
due to quirky hardware (it looks like the same behavior happened on
forcedeth).
Prevent igb from putting the adapter into D3 during shutdown except
when we going to power off the system. For this purpose, seperate
igb_shutdown() from igb_suspend() and use the appropriate PCI PM
callbacks in both of them.
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
Reported-by: Yinghai Lu <yinghai@...nel.org>
---
drivers/net/igb/igb_main.c | 42 ++++++++++++++++++++++++++++++------------
1 file changed, 30 insertions(+), 12 deletions(-)
Index: linux-2.6/drivers/net/igb/igb_main.c
===================================================================
--- linux-2.6.orig/drivers/net/igb/igb_main.c
+++ linux-2.6/drivers/net/igb/igb_main.c
@@ -4277,7 +4277,7 @@ int igb_set_spd_dplx(struct igb_adapter
}
-static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct igb_adapter *adapter = netdev_priv(netdev);
@@ -4336,15 +4336,9 @@ static int igb_suspend(struct pci_dev *p
wr32(E1000_WUFC, 0);
}
- /* make sure adapter isn't asleep if manageability/wol is enabled */
- if (wufc || adapter->en_mng_pt) {
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
- } else {
+ *enable_wake = wufc || adapter->en_mng_pt;
+ if (!*enable_wake)
igb_shutdown_fiber_serdes_link_82575(hw);
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
- }
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
@@ -4352,12 +4346,29 @@ static int igb_suspend(struct pci_dev *p
pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
return 0;
}
#ifdef CONFIG_PM
+static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ bool wake;
+
+ retval = __igb_shutdown(pdev, &wake);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+
static int igb_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
@@ -4412,7 +4423,14 @@ static int igb_resume(struct pci_dev *pd
static void igb_shutdown(struct pci_dev *pdev)
{
- igb_suspend(pdev, PMSG_SUSPEND);
+ bool wake;
+
+ __igb_shutdown(pdev, &wake);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
}
#ifdef CONFIG_NET_POLL_CONTROLLER
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists