So the files are merged there is still #include's mess -- need serious cleanup. Signed-off-by: Cyrill Gorcunov --- arch/x86/kernel/Makefile | 2 arch/x86/kernel/irqinit.c | 249 +++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/irqinit_32.c | 246 ------------------------------------------ arch/x86/kernel/irqinit_64.c | 249 ------------------------------------------- 4 files changed, 250 insertions(+), 496 deletions(-) Index: linux-2.6.git/arch/x86/kernel/Makefile =================================================================== --- linux-2.6.git.orig/arch/x86/kernel/Makefile +++ linux-2.6.git/arch/x86/kernel/Makefile @@ -28,7 +28,7 @@ CFLAGS_paravirt.o := $(nostackp) obj-y := process_$(BITS).o signal.o entry_$(BITS).o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o dumpstack.o -obj-y += setup.o i8259.o irqinit_$(BITS).o +obj-y += setup.o i8259.o irqinit.o obj-$(CONFIG_X86_VISWS) += visws_quirks.o obj-$(CONFIG_X86_32) += probe_roms_32.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o Index: linux-2.6.git/arch/x86/kernel/irqinit.c =================================================================== --- /dev/null +++ linux-2.6.git/arch/x86/kernel/irqinit.c @@ -0,0 +1,249 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_X86_32 +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + outb(0, 0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .mask = CPU_MASK_NONE, + .name = "fpu", +}; +#endif /* CONFIG_X86_32 */ + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ +void __init init_ISA_irqs(void) +{ + int i; + +#ifdef CONFIG_X86_LOCAL_APIC + init_bsp_APIC(); +#endif + init_8259A(0); + + /* 16 old-style INTA-cycle interrupts */ + for (i = 0; i < NR_IRQS_LEGACY; i++) { + struct irq_desc *desc = irq_to_desc(i); + + desc->status = IRQ_DISABLED; + desc->action = NULL; + desc->depth = 1; + + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ + +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +int vector_used_by_percpu_irq(unsigned int vector) +{ + int cpu; + + for_each_online_cpu(cpu) { + if (per_cpu(vector_irq, cpu)[vector] != -1) + return 1; + } + + return 0; +} + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +static void __init smp_intr_init(void) +{ +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP) + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* IPI for generic single function call */ + alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, + call_function_single_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); + set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); +#endif +} + +static void __init apic_intr_init(void) +{ + smp_intr_init(); + +#ifdef CONFIG_X86_LOCAL_APIC + + /* self generated IPI for local APIC timer */ + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* generic IPI for platform specific use */ + alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + +# ifdef CONFIG_PERF_COUNTERS + /* Performance monitoring interrupt */ + alloc_intr_gate(LOCAL_PERF_VECTOR, perf_counter_interrupt); +# endif + +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_64) + /* thermal monitor LVT interrupt */ + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); +# endif + +# ifdef CONFIG_X86_64 + alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); +# endif + +#endif +} + +void __init native_init_IRQ(void) +{ + int i; + + /* Execute any quirks before the call gates are initialised: */ + x86_quirk_pre_intr_init(); + + apic_intr_init(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + /* X86-32: SYSCALL_VECTOR was reserved in trap_init. */ + if (!test_bit(vector, used_vectors)) + set_intr_gate(vector, interrupt[i]); + } + + if (!acpi_ioapic) + setup_irq(2, &irq2); + + /* + * Call quirks after call gates are initialised (usually add in + * the architecture specific gates): + */ + x86_quirk_intr_init(); + +#ifdef CONFIG_X86_32 + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +#endif +} Index: linux-2.6.git/arch/x86/kernel/irqinit_32.c =================================================================== --- linux-2.6.git.orig/arch/x86/kernel/irqinit_32.c +++ /dev/null @@ -1,246 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_X86_32 -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - outb(0, 0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .mask = CPU_MASK_NONE, - .name = "fpu", -}; -#endif /* CONFIG_X86_32 */ - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ -void __init init_ISA_irqs(void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - /* 16 old-style INTA-cycle interrupts */ - for (i = 0; i < NR_IRQS_LEGACY; i++) { - struct irq_desc *desc = irq_to_desc(i); - - desc->status = IRQ_DISABLED; - desc->action = NULL; - desc->depth = 1; - - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; - -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -int vector_used_by_percpu_irq(unsigned int vector) -{ - int cpu; - - for_each_online_cpu(cpu) { - if (per_cpu(vector_irq, cpu)[vector] != -1) - return 1; - } - - return 0; -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -static void __init smp_intr_init(void) -{ -#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP) - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* IPI for generic single function call */ - alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, - call_function_single_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); - set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); -#endif -} - -static void __init apic_intr_init(void) -{ - smp_intr_init(); - -#ifdef CONFIG_X86_LOCAL_APIC - /* self generated IPI for local APIC timer */ - alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* generic IPI for platform specific use */ - alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); -# ifdef CONFIG_PERF_COUNTERS - /* Performance monitoring interrupt */ - alloc_intr_gate(LOCAL_PERF_VECTOR, perf_counter_interrupt); -# endif - -#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_64) - /* thermal monitor LVT interrupt */ - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -# endif - -# ifdef CONFIG_X86_64 - alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); -# endif - -#endif -} - -void __init native_init_IRQ(void) -{ - int i; - - /* Execute any quirks before the call gates are initialised: */ - x86_quirk_pre_intr_init(); - - apic_intr_init(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - /* X86-32: SYSCALL_VECTOR was reserved in trap_init. */ - if (!test_bit(vector, used_vectors)) - set_intr_gate(vector, interrupt[i]); - } - - if (!acpi_ioapic) - setup_irq(2, &irq2); - - /* - * Call quirks after call gates are initialised (usually add in - * the architecture specific gates): - */ - x86_quirk_intr_init(); - -#ifdef CONFIG_X86_32 - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -#endif -} Index: linux-2.6.git/arch/x86/kernel/irqinit_64.c =================================================================== --- linux-2.6.git.orig/arch/x86/kernel/irqinit_64.c +++ /dev/null @@ -1,249 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_X86_32 -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - outb(0, 0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .mask = CPU_MASK_NONE, - .name = "fpu", -}; -#endif /* CONFIG_X86_32 */ - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ -void __init init_ISA_irqs(void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - /* 16 old-style INTA-cycle interrupts */ - for (i = 0; i < NR_IRQS_LEGACY; i++) { - struct irq_desc *desc = irq_to_desc(i); - - desc->status = IRQ_DISABLED; - desc->action = NULL; - desc->depth = 1; - - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ - -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -int vector_used_by_percpu_irq(unsigned int vector) -{ - int cpu; - - for_each_online_cpu(cpu) { - if (per_cpu(vector_irq, cpu)[vector] != -1) - return 1; - } - - return 0; -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -static void __init smp_intr_init(void) -{ -#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP) - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* IPI for generic single function call */ - alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, - call_function_single_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); - set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); -#endif -} - -static void __init apic_intr_init(void) -{ - smp_intr_init(); - -#ifdef CONFIG_X86_LOCAL_APIC - - /* self generated IPI for local APIC timer */ - alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* generic IPI for platform specific use */ - alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - -# ifdef CONFIG_PERF_COUNTERS - /* Performance monitoring interrupt */ - alloc_intr_gate(LOCAL_PERF_VECTOR, perf_counter_interrupt); -# endif - -#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_64) - /* thermal monitor LVT interrupt */ - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -# endif - -# ifdef CONFIG_X86_64 - alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); -# endif - -#endif -} - -void __init native_init_IRQ(void) -{ - int i; - - /* Execute any quirks before the call gates are initialised: */ - x86_quirk_pre_intr_init(); - - apic_intr_init(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - /* X86-32: SYSCALL_VECTOR was reserved in trap_init. */ - if (!test_bit(vector, used_vectors)) - set_intr_gate(vector, interrupt[i]); - } - - if (!acpi_ioapic) - setup_irq(2, &irq2); - - /* - * Call quirks after call gates are initialised (usually add in - * the architecture specific gates): - */ - x86_quirk_intr_init(); - -#ifdef CONFIG_X86_32 - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -#endif -} -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/